Easy Daedalus 6.5.1

Moderator: BarryK

tallboy
Posts: 47
Joined: Fri Aug 14, 2020 5:41 am
Been thanked: 8 times

Re: Easy Daedalus 6.5

Post by tallboy »

Re: Bluetooth

Barry wrote:

Is that failure for both Scarthgap and Daedalus?

Yes, I retested a few minutes ago, and both Scarthgap and Daedalus report 'no default controller available'.
I checked my laptop's bios to confirm BT activation, and I also sent an image to my phone by BT, from the same laptop, using EasyPup 2.5.1, so there's no any technical issues with the laptop.
The funny thing is, that I used the EasyPup's Network menu entry 'BluetoothSendto' to send that image, without activating the BT beforhand. When I attempt to use the BluePup Bluetooth activation management, it says it is paired to the phone, but the log says it isn't connected. When I try to send a file to the phone from the management window, a message pops up: 'connect error: Connection refused (111)'.
There is a 'BluetoothSendto' entry in the Scarthgap's Network menu, but it did not find the phone. There is no 'BluetoothSendto' in Daedalus, neither as a menu entry, nor a command.

tallboy

User avatar
Federico
Posts: 304
Joined: Tue Jun 20, 2023 2:40 pm
Has thanked: 1 time
Been thanked: 36 times

Re: Easy Daedalus 6.5

Post by Federico »

tallboy wrote: Fri Dec 06, 2024 8:31 pm

Re: Bluetooth

Yes, I retested a few minutes ago, and both Scarthgap and Daedalus report 'no default controller available'.
I checked my laptop's bios to confirm BT activation, and I also sent an image to my phone by BT, from the same laptop, using EasyPup 2.5.1, so there's no any technical issues with the laptop.
The funny thing is, that I used the EasyPup's Network menu entry 'BluetoothSendto' to send that image, without activating the BT beforhand. When I attempt to use the BluePup Bluetooth activation management, it says it is paired to the phone, but the log says it isn't connected. When I try to send a file to the phone from the management window, a message pops up: 'connect error: Connection refused (111)'.
There is a 'BluetoothSendto' entry in the Scarthgap's Network menu, but it did not find the phone. There is no 'BluetoothSendto' in Daedalus, neither as a menu entry, nor a command.

tallboy

I think you should post the output of the lspci command for your laptop, because the problem looks to be only related to your hardware.
Furthermore, did you already try to install the iwlwifi firmware package and restart the system?

Desktop PC
Case: Sharkoon S25-W MB: Asus Rog Strix B550-A PSU: XFX Pro 750W CPU: AMD Ryzen 5700X @ 4.6 GHz RAM: Corsair 32 GB DDR4 @ 3000 MHz Heatsink: Scythe Mugen 5 rev. B VGA: Asus Tuf RTX 3080 12 GB OC

Laptop PC: Asus Zenbook UX325E

tallboy
Posts: 47
Joined: Fri Aug 14, 2020 5:41 am
Been thanked: 8 times

Re: Easy Daedalus 6.5

Post by tallboy »

Federico, thank you for your suggestions, but I doubt the hardware is a problem. The laptop with 5 different EasyOS and Puppys, is running by wifi from my router, I can send a file using BlueTooth from the earlier version of BluePup (5.50 if I remember correct) in EasyPup. The command lspci only list the default Dell controllers, it can unfortunately not report any faults. I think the problem is related to the Bluetooth software, or eventual mistakes I have made in my settings or preferences.

tallboy

# lspci
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07)
00:19.0 Ethernet controller: Intel Corporation 82567LM Gigabit Network Connection (rev 03)
00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03)
00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M-E LPC Interface Controller (rev 03)
00:1f.2 RAID bus controller: Intel Corporation 82801 Mobile SATA Controller [RAID mode] (rev 03)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
01:00.0 VGA compatible controller: NVIDIA Corporation G98M [Quadro NVS 160M] (rev a1)
03:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ba)
03:01.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 04)
03:01.2 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 21)
03:01.3 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 11)
0c:00.0 Network controller: Intel Corporation Ultimate N WiFi Link 5300
#

User avatar
Federico
Posts: 304
Joined: Tue Jun 20, 2023 2:40 pm
Has thanked: 1 time
Been thanked: 36 times

Buggy Bluetooth connections

Post by Federico »

tallboy wrote: Sat Dec 07, 2024 4:19 pm

Federico, thank you for your suggestions, but I doubt the hardware is a problem. The laptop with 5 different EasyOS and Puppys, is running by wifi from my router, I can send a file using BlueTooth from the earlier version of BluePup (5.50 if I remember correct) in EasyPup. The command lspci only list the default Dell controllers, it can unfortunately not report any faults. I think the problem is related to the Bluetooth software, or eventual mistakes I have made in my settings or preferences.

tallboy

# lspci
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07)
00:19.0 Ethernet controller: Intel Corporation 82567LM Gigabit Network Connection (rev 03)
00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03)
00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M-E LPC Interface Controller (rev 03)
00:1f.2 RAID bus controller: Intel Corporation 82801 Mobile SATA Controller [RAID mode] (rev 03)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
01:00.0 VGA compatible controller: NVIDIA Corporation G98M [Quadro NVS 160M] (rev a1)
03:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ba)
03:01.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 04)
03:01.2 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 21)
03:01.3 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 11)
0c:00.0 Network controller: Intel Corporation Ultimate N WiFi Link 5300
#

Hmm yes, I also report this problem. Can you connect to wireless headphones? It looks like with version 6.5 it is even possible to connect and stream audio via BT, but for some reason data transfers from and to smartpgones don't work anymore. The coupling with the phones works, but when you press the send file button you always get the message saying that an error has occurred. May this be a translation problem (I'm using the german locale)? Which locale are you using for the system?

So, summerizing:

- On both Easy Scarthgap and Daedalus 6.5 there are no problems with using wireless BlueTooth audio devices
- On both Easy Scarthgap and Daedalus 6.5 it is no more possible to send / receive data to / from a smartphone
- On Scarthgap 6.5 with Bluez 5.62 I can couple (and the phone also couples) but when I try to send anything I get immediately an error has occurred
- On Daedalus 6.5 with Bluez 5.66 I cannot even couple: the laptop couples and is ready to send files, but the phone does not and keeps on saying that it cannot couple because an error has occurred

Yes, file transfer via BT used to work and now it looks like it does no more. I'm using the german locale.
However, something about this should also be said because who's still using BT for file transfer nowadays, if so many apps for Wi-Fi file transfer (which is faster) are available?

Desktop PC
Case: Sharkoon S25-W MB: Asus Rog Strix B550-A PSU: XFX Pro 750W CPU: AMD Ryzen 5700X @ 4.6 GHz RAM: Corsair 32 GB DDR4 @ 3000 MHz Heatsink: Scythe Mugen 5 rev. B VGA: Asus Tuf RTX 3080 12 GB OC

Laptop PC: Asus Zenbook UX325E

User avatar
BarryK
Posts: 2761
Joined: Tue Dec 24, 2019 1:04 pm
Has thanked: 140 times
Been thanked: 755 times

Re: Easy Daedalus 6.5.1

Post by BarryK »

Version 6.5.1 released.

Blog announcement:

https://bkhome.org/news/202412/easyos-d ... n-651.html

User avatar
BarryK
Posts: 2761
Joined: Tue Dec 24, 2019 1:04 pm
Has thanked: 140 times
Been thanked: 755 times

Re: Easy Daedalus 6.5.1

Post by BarryK »

Ha ha, there is a serious update bug, see the Scarthgap thread:

viewtopic.php?p=137858#p137858

I will release 6.5.1.1 tonight.

User avatar
pp4mnklinux
Posts: 1161
Joined: Wed Aug 19, 2020 5:43 pm
Has thanked: 642 times
Been thanked: 305 times

Re: Easy Daedalus 6.5.1.1

Post by pp4mnklinux »

I'm really excited and impatient to receive the new update for EasyOS Daedalus!

I've been eagerly waiting to see the improvements and new features it brings.

I can't wait to try it out and see how it enhances the overall experience. The anticipation is killing me, haha !!

Have a nice saturday, I'm at hospital waiting for a surgery...... but connected, haha-

Cheers.

~~ Edited: 12/15/2024 ~~

Download link:
https://distro.ibiblio.org/easyos/amd64 ... 4/6.5.1.1/

Release notes
https://distro.ibiblio.org/easyos/amd64 ... -notes.htm

Attachments
Daedalus net 6.5.1.1.jpg
Daedalus net 6.5.1.1.jpg (60.26 KiB) Viewed 44 times
Screenshot_20241215-053924_EasyOS forum.jpg
Screenshot_20241215-053924_EasyOS forum.jpg (72.16 KiB) Viewed 126 times
Last edited by pp4mnklinux on Sun Dec 15, 2024 5:11 pm, edited 3 times in total.

PP4MNK

thinkpadfreak
Posts: 269
Joined: Thu Jul 16, 2020 6:37 am
Has thanked: 7 times
Been thanked: 60 times

Re: Easy Daedalus 6.5.1

Post by thinkpadfreak »

Thanks for the updated version.

On Easy Daedalus 6.5.1.1, however, gFTP still does not start.

Creating an empty file /usr/share/gftp/gftprc will fix the problem.

Post Reply

Return to “EasyOS”