Puppy Linux Discussion Forum

icake wrote: Fri Sep 01, 2023 6:29 am

BarryK released EasyOS Kirkstone-series version 5.4.9 on Jul 31, 2023 and 5.4.10 on Aug 8, 2023

for more information and discussions

download easy-5.4.9-amd64.img (845 mb)
download easy-5.4.10-amd64.img (878 mb)

I have created 6 half-Chinese language pets for EasyOS Kirkstone-series version 5.4.9 and 10:
fcitx Chinese input platform: fcitx64_4.2.7-en-zh-bionic-21.2.7.pet (16 mb)
gcin Chinese input platform: gcin64_2.9.0-en-zh-bionic-21.2.7.pet (10 mb)
hime Chinese input platform: hime64_0.9.11-en-zh-bionic-21.2.7.pet (8 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.2.7.pet (35 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-21.2.7.pet (10 mb)
corrected Aug 13, 2023: yong Chinese input platform: yong3264_20201122-en-zh-bionic-21.2.7.pet (10 mb)

Plus 2 Chinese language pets each for EasyOS Kirkstone-series version 5.4.9 and 10:
Simplified Chinese:
easykirkstone-5.4.9-zhcn-21.2.7.pet (9 mb)
easykirkstone-5.4.10-zhcn-21.2.7.pet (9 mb)
Traditional Chinese:
easykirkstone-5.4.9-zhhk-21.2.7.pet (8 mb)
easykirkstone-5.4.10-zhhk-21.2.7.pet (8 mb)

To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in EasyOS Kirkstone-series version 5.4.9 and 10

(b) the 2 name+version number corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for EasyOS Kirkstone-series version 5.4.9 and 10. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

more information about the fcitx, gcin, hime, ibus, scim and yong pets, please see the first posting of this subject

我在 Kirkstone_5.5.3 上安装试用 yong 及 fcitx 两个输入法，发现在部分应用中无法使用，比如Chromium上都没法使用。请问有什么办法吗？

我在 Kirkstone_5.5.3 上安装试用 yong 及 fcitx 两 ... 。请问有什么办法吗？

每个中文包，都有一定的系统要求，而芭比的英文系统，每一个都是作者自由开发，在开发的过程中，难免要作出取舍。所以结果是，并非百分之百的芭比英文系统，都能兼容所有的中文包，就算系统可以运行中文包，亦并非所有应用程式，也能运行中文包。
在 Kirkstone_5.5.3 下，中文包是可以运行的，但在Kirkstone_5.5.3 的Chromium中就无法使用中文包。解决的办法，可以用另外一个浏览器，我测试过，palemoon 及 seamonkey 都可以运行中文包。如果你发现有其他更好的解决办法，欢迎和大家分享。

icake

谢谢你的解答。还想请教您是如何制作这些中文软件包，我也想尝试一下，请问哪里可以找到参考说明？万分感谢！！

还想请教您是如何制作这些中文软件包

在比较有规模的 Linux 基础系统中，如 debian, slackware, ubuntu 等，都自备一套比较完善的软件包管理系统。当我为这些 Linux 基础系统的英文版本，安装中文包时，就会知道要在某一英文 Linux 基础系统中安装中文包时，所须安装的所有软件。由于其他芭比衍生系统，大都是基于较有规模的 Linux 基础英文系统组合而成，所以只要将原来的 Linux 基础系统中文包，作出适当的调整，就能够为其他 Linux 系统，造出所须的中文包了。

道理是比较简单的，但实践起来，也要花些时间和耐心，到你看过，看熟所有不同的 Linux 基础系统中的不同变化方式后，造起中文包来，自然就会更加省时，流畅，及有效率了。

icake

关于中文输入法，请问您有考虑为相关系统适配 rime 输入法吗？

请问您有考虑为相关系统适配 rime 输入法吗

之前我有尝试造一个基于 rime 输入法的中文包。但碰到多个未能解决的问题，所以放弃了。

icake

关于中文输入法，请问您有考虑为相关系统适配 rime 输入法吗？

我刚为 Fatdog64-901 做了七个中文包，其中包括 rime 中文包。

详情请看

我是您制作的输入法和语言包的受益者，非常感谢您十多年来的努力坚持和无私奉献，祝您生活愉快，家庭幸福

friendly-bionic32-v1.0 was released by wiard on Aug 23, 2023

more information and discussions for friendly-bionic32-v1.0

download friendly-bionic32-v1.0.iso (493 mb)

I have created 6 half-Chinese language pets for friendly bionic32 v1.0:
fcitx Chinese input platform: fcitx32_4.2.7-en-zh-bionic-20.0.5.pet (32 mb)
gcin Chinese input platform: gcin32_2.8.2-en-zh-bionic-20.0.5.pet (5 mb)
hime Chinese input platform: hime32_0.9.10-en-zh-bionic-20.0.5.pet (5 mb)
ibus Chinese input platform: ibus32_1.5.17-en-zh-bionic-20.0.5.pet (61 mb)
scim Chinese input platform: scim32_1.4.18-en-zh-bionic-20.0.5.pet (25 mb)
yong Chinese input platform: yong32_2.5.0-en-zh-bionic-20.0.5.pet (9 mb)

Plus 2 Chinese language pets each for friendly bionic32 v1.0:
Simplified Chinese: friendly-bionicpup-v1.0-zhcn-20.0.5.pet (4 mb)

Traditional Chinese: friendly-bionicpup-v1.0-zhhk-20.0.5.pet (3 mb)

To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in friendly bionic32 v1.0

(b) the name+version number corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for friendly bionic32 v1.0. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

for more information about the fcitx, gcin, hime, ibus, scim and yong half-Chinese pets, please see the first posting of this subject

BarryK released EasyOS Kirkstone-series version 5.5.1 on Sep 13, 2023; 5.5.2 on Sep 22, 2023; 5.5.3 on Sep 26, 2023; 5.5.4 on Oct 4, 2023 and 5.5.5 on Oct 14, 2023

for more information and discussions

download easy-5.5.1-amd64.img (845 mb)
download easy-5.5.2-amd64.img (857 mb)
download easy-5.5.3-amd64.img (857 mb)
download easy-5.5.4-amd64.img (857 mb)
download easy-5.5.5-amd64.img (857 mb)

I have created 6 half-Chinese language pets for EasyOS Kirkstone-series versions 5.5.1 to 5.5.5:
fcitx Chinese input platform: fcitx64_4.2.7-en-zh-bionic-21.2.7.pet (16 mb)
gcin Chinese input platform: gcin64_2.9.0-en-zh-bionic-21.2.7.pet (10 mb)
hime Chinese input platform: hime64_0.9.11-en-zh-bionic-21.2.7.pet (8 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.2.7.pet (35 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-21.2.7.pet (10 mb)
corrected Aug 13, 2023: yong Chinese input platform: yong3264_20201122-en-zh-bionic-21.2.7.pet (10 mb)

Plus 2 Chinese language pets each for EasyOS Kirkstone-series version 5.5.1 to 5.5.5:
Simplified Chinese:
easykirkstone-5.5.1-zhcn-21.2.7.pet (9 mb)
easykirkstone-5.5.2-zhcn-21.2.7.pet (9 mb)
easykirkstone-5.5.3-zhcn-21.2.7.pet (9 mb)
easykirkstone-5.5.4-zhcn-21.2.7.pet (9 mb)
easykirkstone-5.5.5-zhcn-21.2.7.pet (9 mb)

Traditional Chinese:
easykirkstone-5.5.1-zhhk-21.2.7.pet (7 mb)
easykirkstone-5.5.2-zhhk-21.2.7.pet (7 mb)
easykirkstone-5.5.3-zhhk-21.2.7.pet (7 mb)
easykirkstone-5.5.4-zhhk-21.2.7.pet (7 mb)
easykirkstone-5.5.5-zhhk-21.2.7.pet (7 mb)

To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in EasyOS Kirkstone-series versions 5.5.1 to 5.5.5

(b) the 2 name+version number corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for EasyOS Kirkstone-series versions 5.5.1 to 5.5.5. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

more information about the fcitx, gcin, hime, ibus, scim and yong pets, please see the first posting of this subject

peebee released LunarPup32 23.06+4 on Sep 21, 2023

for more information and discussions

download LunarPup32 23.06+0+4.iso

I have created 6 half-Chinese language pets for LunarPup32 23.06+4:
fcitx Chinese input platform: fcitx32_4.2.9-en-zh-bionic-20.0.4.pet (27 mb)
gcin Chinese input platform: gcin32_2.8.2-en-zh-bionic-20.0.4.pet (5 mb)
hime Chinese input platform: hime32_0.9.11-en-zh-bionic-20.0.4.pet (5 mb)
ibus Chinese input platform: ibus32_1.5.17-en-zh-bionic-20.0.4.pet (33 mb)
scim Chinese input platform: scim32_1.4.18-en-zh-bionic-20.0.4.pet (17 mb)
yong Chinese input platform: yong32_2.5.0-en-zh-bionic-20.0.4.pet (10 mb)

Plus 2 Chinese language pets each for LunarPup32 23.06+4:
Simplified Chinese: lunarpup32-23.06.04-zhcn-20.0.4.pet (4 mb)

Traditional Chinese: lunarpup32-23.06.04-zhhk-20.0.4.pet (3 mb)

To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in LunarPup32 23.06+4

(b) the 2 name+version number corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for LunarPup32 23.06+4. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

peebee released ManticPup32 23.10-RC0 on Sep 21, 2023; 23.10-RC1 on Oct 5, 2023; 23.10+0 on Oct 16, 2023

for more information and discussions

download ManticPup32-23.10-RC0.iso
download manticPup32 23.10.rc1.iso
download manticPup32 23.10+0.iso

I have created 7 half-Chinese language pets for ManticPup32 23.10-RC0 to +0:
fcitx Chinese input platform: fcitx32_4.2.9-en-zh-bionic-20.0.4.pet (27 mb)
gcin Chinese input platform: gcin32_2.8.2-en-zh-bionic-20.0.4.pet (5 mb)
hime Chinese input platform: hime32_0.9.11-en-zh-bionic-20.0.4.pet (5 mb)
ibus Chinese input platform: ibus32_1.5.17-en-zh-bionic-20.0.4.pet (33 mb)
rime Chinese input platform: ibus32-rime_1.2-en-zh-bionic-20.0.4.pet (128 mb)
scim Chinese input platform: scim32_1.4.18-en-zh-bionic-20.0.4.pet (17 mb)
yong Chinese input platform: yong32_2.5.0-en-zh-bionic-20.0.4.pet (10 mb)

Plus 2 Chinese language pets each for ManticPup32 23.10-RC0 to +0:
Simplified Chinese:
manticpup32-23.10.rc0-zhcn-20.0.4.pet (4 mb)
manticpup32-23.10.rc1-zhcn-20.0.4.pet (4 mb)
manticpup32-23.10.00-zhcn-20.0.4.pet (4 mb)

Traditional Chinese:
manticpup32-23.10.rc0-zhhk-20.0.4.pet (3 mb)
manticpup32-23.10.rc1-zhhk-20.0.4.pet (3 mb)
manticpup32-23.10.00-zhhk-20.0.4.pet (3 mb)

To use:
(a) any 1 of the 7 half-Chinese language pets will enable you to display and input Chinese in manticPup32 23.10.rc0 to +0

(b) the 2 name+version number corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for manticPup32 23.10.rc0 to +0. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

more information about the fcitx, gcin, hime, ibus, scim and yong pets, please see the first posting of this subject

ozsouth released a number of Fossa64 Puppy devivatives and the latest is Fossa64-Mid 2 on July 28, 2023

for more information, discussions and download Fossa64-Mid 2

download fossapup64-9.5-mid-2.iso

I have created 5 half-Chinese language pets for fossapup64 9.5.0 mid2:
fcitx Chinese input platform: fcitx64_4.2.9-en-zh-raring-14.1.3.pet (19 mb)
gcin Chinese input platform: gcin64_2.8.2-en-zh-raring-14.1.3.pet (6 mb)
hime Chinese input platform: hime64_0.9.11-en-zh-raring-14.1.3.pet (6 mb)
scim Chinese input platform: scim64_1.4.9-en-zh-raring-14.1.3.pet (18 mb)
yong Chinese input platform: yong64_2.5.0-en-zh-raring-14.1.3.pet (10 mb)

Plus 2 Chinese language pets each for fossapup64 9.5.0 mid2:
Simplified Chinese: fossapup64-9.5.0.mid2-zhcn-14.1.3.pet (2 mb)
Traditional Chinese: fossapup64-9.5.0.mid2-zhhk-14.1.3.pet (2 mb)

To use:
(a) any 1 of the 5 half-Chinese language pets will enable you to display and input Chinese in fossapup64 9.5.0 mid2

(b) the 2 name+version number corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for fossapup64 9.5.0 mid2. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

more information about the fcitx, gcin, hime, scim and yong pets, please see the first posting of this subject

the fatdog team released fatdog64-901 final on Oct 10, 2023

for more information and discussions

download Fatdog64-901.iso (635 mb)

I. icake language txzes:
I have created 7 half-Chinese language txzes for fatdog64-900:
fcitx Chinese input platform: fcitx64_4.2.7-en-zh-bionic-321.0.6.txz (21 mb)
gcin Chinese input platform: gcin64_2.8.5-en-zh-bionic-321.0.6.txz (6 mb)
hime Chinese input platform: hime64_0.9.10-en-zh-bionic-321.0.6.txz (10 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-321.0.6.txz (55 mb)
rime Chinese input platform: ibus64-rime_1.4.0-en-zh-bionic-321.0.6.txz (76 mb)
scim Chinese input platform: scim64_1.4.14-en-zh-bionic-321.0.6.txz (14 mb)
yong Chinese input platform: yong64_2.5.0-en-zh-bionic-321.0.6.txz (10 mb)

Plus 2 Chinese language txzes each for fatdog64-900:
Simplified Chinese: fatdog64-901-zhcn-321.0.6.txz (4 mb)

Traditional Chinese: fatdog64-901-zhcn-321.0.6.txz (3 mb)

To use:
(a) any 1 of the 7 half-Chinese language pets will enable you to display and input Chinese in fatdog64-901

(b) the 2 name+version number corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for fatdog64-900. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

II. icake combo txz
I have also created an icake combo txz for fatdog64-901 with all 7 Chinese input platforms above and 3 user interface languages:
icake64-fatdog64-901-combo-est-fghirsy.321.0.6.txz (185 mb)

III. icake combo live iso
I have also remastered 1 icake combo live iso based on fatdog64-901 with all 7 Chinese input platforms above and 3 user interface languages:
icake64-Fatdog64-901-est-fghirsy.iso (854 mb)

so the total number of different systems created by the above icake combo txz and combo live iso is 21:
21 = 7 Chinese input platforms (fcitx, gcin, hime, ibus, rime, scim or yong) X 3 user interface languages (English, Simplified Chinese and Traditional Chinese)

more information about the fcitx, gcin, hime, ibus, ibus-rime, scim and yong txzes, please see:
Documentation-and-Tools

radky released Bookworm Pup64 10.0.3 on Nov 1, 2023

for more information and discussions

download BookwormPup64_10.0.3.iso (769 mb)

I. icake half-Chinese and Chinese language pets
I have created 7 half-Chinese language pets for Bookworm Pup64 10.0.3:
fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bookworm-21.8.0.pet (19 mb)
gcin Chinese input platform: gcin64_2.8.2-en-zh-bookworm-21.8.0.pet (6 mb)
hime Chinese input platform: hime64_0.9.11-en-zh-bookworm-21.8.0.pet (6 mb)
ibus Chinese input platform: ibus64_1.5.27-en-zh-bookworm-21.8.0.pet (78 mb)
rime Chinese input platform: ibus64-rime_1.5.0-en-zh-bookworm-21.8.0.pet (78 mb)
scim Chinese input platform: scim64_1.4.9-en-zh-bookworm-21.8.0.pet (14 mb)
yong Chinese input platform: yong64_2.5.0-en-zh-bookworm-21.8.0.pet (10 mb)

Plus 2 Chinese language pets each for Bookworm Pup64 10.0.3:
Simplified Chinese: BookwormPup64-10.0.3-zhcn-21.8.0-zhcn-21.8.0.pet (4 mb)
Traditional Chinese: BookwormPup64-10.0.3-zhcn-21.8.0-zhhk-21.8.0.pet (3 mb)

To use:
(a) any 1 of the 7 half-Chinese language pets will enable you to display and input Chinese in Bookworm Pup64 10.0.3

(b) the 2 name+version number corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for Bookworm Pup64 10.0.3. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

II. icake combo live iso
I have also remastered 1 icake combo live iso based on BookwormPup64_10.0.3 with all 7 Chinese input platforms above and 3 user interface languages:
icake64-BookwormPup64_10.0.3-est-fghirsy.iso (1.1 Gb)

so the total number of different systems created by the above icake combo txz and combo live iso is 21:
21 = 7 Chinese input platforms (fcitx, gcin, hime, ibus, rime, scim or yong) X 3 user interface languages (English, Simplified Chinese and Traditional Chinese)

more information about the fcitx, gcin, hime, ibus, rime, scim and yong pets, please see the first posting of this subject

friendly-jammy32-rc1.iso was released by wiard on Nov 20, 2023

more information and discussions for friendly-jammy32-rc1.iso

download friendly-jammy32-rc1.iso (554 mb)

I. icake Chinese language pets and half-Chinese language pets：
I have created 7 half-Chinese language pets for friendly-jammy32-rc1:

1. fcitx Chinese input platform: fcitx32_4.2.9-en-zh-bionic-20.1.5.pet (24 mb)
2. gcin Chinese input platform: gcin32_2.8.2-en-zh-bionic-20.1.5.pet (5 mb)
3. hime Chinese input platform: hime32_0.9.11-en-zh-bionic-20.1.5.pet (5 mb)
4. ibus Chinese input platform: ibus32_1.5.17-en-zh-bionic-20.1.5.pet (50 mb)
5. rime Chinese input platform: ibus32-rime_1.2-en-zh-bionic-20.1.5.pet (125 mb)
6. scim Chinese input platform: scim32_1.4.18-en-zh-bionic-20.1.5.pet (14 mb)
7. yong Chinese input platform: yong32_2.5.0-en-zh-bionic-20.1.5.pet (10 mb)

Plus 2 Chinese language pets each for friendly-jammy32-rc1:

1. Simplified Chinese: friendly-jammy32-rc1-zhcn-20.1.5.pet (4 mb)

2. Traditional Chinese: friendly-jammy32-rc1-zhhk-20.1.5.pet (3 mb)

To use:
(a) any 1 of the 7 half-Chinese language pets will enable you to display and input Chinese in friendly-jammy32-rc1

(b) the name+version number corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for friendly-jammy32-rc1. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

II. icake combo live iso：
I have also remastered 1 icake combo live iso based on friendly-jammy32-rc1 with all 7 Chinese input platforms above and 3 user interface languages:
icake32-friendly-jammy32-rc1-est-fghirsy.iso (828 mb)

for more information about the fcitx, gcin, hime, ibus, rime, scim and yong half-Chinese pets, please see the first posting of this subject

peebee released a number of BookwormPup32 systems since Oct 2023, the latest is BookwormPup32-23.12+1.iso on Dec 16, 2023

more information and discussions for BookworkPup32

download BookwormPup32-23.12+1.iso (554 mb)

I have created 5 half-Chinese language pets for BookwormPup32-23.11.B1 and BookwormPup32-23.12+1:

1. fcitx Chinese input platform: fcitx32_4.2.7-en-zh-bookworm-14.4.1.pet (21 mb)
2. ibus Chinese input platform: ibus32_1.5.17-en-zh-bookworm-14.4.1.pet (33 mb)
3. rime Chinese input platform: ibus32-rime_1.2-en-zh-bookworm-14.4.1.pet (123 mb)
4. scim Chinese input platform: scim32_1.4.14-en-zh-bookworm-14.4.1.pet (15 mb)
5. yong Chinese input platform: yong32_2.5.0-en-zh-bookworm-14.4.1.pet (10 mb)

Plus 2 Chinese language pets each for BookwormPup32-23.11.B1 and BookwormPup32-23.12+1:

1. Simplified Chinese:
   bookwormpup32-23.11.b1-zhcn-14.4.1.pet (4 mb)
   bookwormpup32-23.12.01-zhcn-14.4.1.pet (4 mb)

2. Traditional Chinese:
   bookwormpup32-23.11.b1-zhhk-14.4.1.pet (3 mb)
   bookwormpup32-23.12.01-zhhk-14.4.1.pet (3 mb)

To use:
(a) any 1 of the 5 half-Chinese language pets will enable you to display and input Chinese in BookwormPup32-23.11.B1 and BookwormPup32-23.12+1

(b) the name+version number corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for BookwormPup32-23.11.B1 and BookwormPup32-23.12+1. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

for more information about the fcitx, ibus, rime, scim and yong half-Chinese pets, please see the first posting of this subject

fredx181 released Devuan with Trinity Desktop 64 and 32 bit on Aug 25, 2022; Devuan_live-Trinity-32-bit-no-pae.iso on Dec 15, 2023

more information and discussions for Devuan with Trinity Desktop

download Devuan_live-Trinity-64-bit.iso (486 mb) and Devuan_live-Trinity-32-bit.iso (444 mb)
download Devuan_live-Trinity-32-bit-no-pae.iso (470 mb)

I have created 7 half-Chinese language debs each for Devuan_live-Trinity-64-bit and Devuan_live-Trinity-32-bit:
64 bit:

1. fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bookworm-121.5.7.deb (21 mb)
2. gcin Chinese input platform: gcin64_2.9.0-en-zh-bookworm-121.5.7.deb (12 mb)
3. hime Chinese input platform: hime64_0.9.11-en-zh-bookworm-121.5.7.deb (12 mb)
4. ibus Chinese input platform: ibus64_1.5.23-en-zh-bookworm-121.5.7.deb (34 mb)
5. rime Chinese input platform: ibus64-rime_1.4.0-en-zh-bookworm-121.5.7.deb.pet (103 mb)
6. scim Chinese input platform: scim64_1.4.18-en-zh-bookworm-121.5.7.deb (10 mb)
7. yong Chinese input platform: yong64_2.5.0-en-zh-bookworm-121.5.7.deb (9 mb)

32 bit:

1. fcitx Chinese input platform: fcitx32_4.2.9-en-zh-bookworm-120.5.4.deb (26 mb)
2. gcin Chinese input platform: gcin32_2.8.2-en-zh-bookworm-120.5.4.deb (5 mb)
3. hime Chinese input platform: hime32_0.9.11-en-zh-bookworm-120.5.4.deb (5 mb)
4. ibus Chinese input platform: ibus32_1.5.23-en-zh-bookworm-120.5.4.deb (35 mb)
5. rime Chinese input platform: ibus32-rime_1.4.0-en-zh-bookworm-120.5.4.deb (60 mb)
6. scim Chinese input platform: scim32_1.4.18-en-zh-bookworm-120.5.4.deb (10 mb)
7. yong Chinese input platform: yong32_2.5.0-en-zh-bookworm-120.5.4.deb (8 mb)

Plus 2 Chinese language pets each for Devuan_live-Trinity-64-bit and Devuan_live-Trinity-32-bit:

1. Simplified Chinese:
   Devuan_live-Trinity-64-bit-zhcn-121.5.7.deb (6 mb)
   Devuan_live-Trinity-32-bit-zhcn-120.5.4.deb (6 mb)

2. Traditional Chinese:
   Devuan_live-Trinity-64-bit-zhhk-121.5.7.deb (5 mb)
   Devuan_live-Trinity-32-bit-zhhk-120.5.4.deb (5 mb)

To use:
(a) any 1 of the 7 half-Chinese language pets will enable you to display and input Chinese in Devuan_live-Trinity-64-bit and Devuan_live-Trinity-32-bit

(b) the name+version number corresponding Chinese language debs will give you Simplified Chinese (use zhcn debs) or Traditional Chinese (use zhhk debs) desktop menus, icon labels, tooltips for Devuan_live-Trinity-64-bit and Devuan_live-Trinity-32-bit. Please note that all Chinese language debs rely on a suitable half-Chinese language deb already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

for more information about the fcitx, gcin，hime，ibus, rime, scim and yong half-Chinese debs, please see the first posting of this subject

peebee released bookwormpup32 23.12-231231 on Dec 31, 2023

for more information and discussions

download BookwormPup32-23.12-231231.iso (591 mb)

I. icake language pets:
I have created 7 half-Chinese language txzes for bookwormpup32 23.12-231231:
fcitx Chinese input platform: fcitx32_4.2.7-en-zh-bookworm-14.4.1.pet (21 mb)
gcin Chinese input platform: gcin32_2.8.2-en-zh-bookworm-14.4.1.pet (5 mb)
hime Chinese input platform: hime32_0.9.11-en-zh-bookworm-14.4.1.pet (5 mb)
ibus Chinese input platform: ibus32_1.5.17-en-zh-bookworm-14.4.1.pet (33 mb)
rime Chinese input platform: ibus32-rime_1.2-en-zh-bookworm-14.4.1.pet (125 mb)
scim Chinese input platform: scim32_1.4.14-en-zh-bookworm-14.4.1.pet (14 mb)
yong Chinese input platform: yong32_2.5.0-en-zh-bookworm-14.4.1.pet (10 mb)

Plus 2 Chinese language pets each for bookwormpup32 23.12-231231:
Simplified Chinese: bookwormpup32-23.12-231231-zhcn-14.4.1.pet (4 mb)

Traditional Chinese: bookwormpup32-23.12-231231-zhhk-14.4.1.pet (3 mb)

To use:
(a) any 1 of the 7 half-Chinese language pets will enable you to display and input Chinese in bookwormpup32 23.12-231231

(b) the 2 name+version number corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for bookwormpup32 23.12-231231. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

II. icake combo live iso
I have also remastered 1 icake combo live iso based on bookwormpup32 23.12-231231 with all 7 Chinese input platforms above and 3 user interface languages:
icake32-BookwormPup32-23.12-231231-est-fghirsy.iso (874 mb)

so the total number of different systems created by the above icake combo live iso is 21:
21 = 7 Chinese input platforms (fcitx, gcin, hime, ibus, rime, scim or yong) X 3 user interface languages (English, Simplified Chinese and Traditional Chinese)

more information about the fcitx, gcin, hime, ibus, ibus-rime, scim and yong pets, please see:
Documentation-and-Tools

peebee released bionicpup32 19.03-231231 and focalpup32 20.12-231231 on Dec 31, 2023

for more information and discussions

download BionicPup32-19.03-231231.iso (371 mb)
download FocalPup32-20.12-231231.iso (388 mb)

I. icake language pets:
I have created 7 half-Chinese language txzes for bionicpup32 19.03-231231 and focalpup32 20.12-231231:
fcitx Chinese input platform: fcitx32_4.2.7-en-zh-bionic-20.0.2.pet (21 mb)
gcin Chinese input platform: gcin32_2.8.2-en-zh-bionic-20.0.2.pet (5 mb)
hime Chinese input platform: hime32_0.9.10-en-zh-bionic-20.0.2.pet (5 mb)
ibus Chinese input platform: ibus32_1.5.17-en-zh-bionic-20.0.2.pet (17 mb)
rime Chinese input platform: ibus32-rime_1.2-en-zh-bionic-20.0.2.pet (126 mb)
scim Chinese input platform: scim32-1.4.18-en-zh-bionic-20.0.2.pet (17 mb)
yong Chinese input platform: yong32_2.5.0-en-zh-bionic-20.0.2.pet (10 mb)

Plus 2 Chinese language pets each for bionicpup32 19.03-231231 and focalpup32 20.12-231231:
Simplified Chinese:
bionicpup32-19.03-231231-zhcn-20.0.2.pet (4 mb)
focalpup32-20.12-231231-zhcn-20.0.2.pet (4 mb)

Traditional Chinese:
bionicpup32-19.03-231231-zhhk-20.0.2.pet (3 mb)
focalpup32-20.12-231231-zhhk-20.0.2.pet (3 mb)

To use:
(a) any 1 of the 7 half-Chinese language pets will enable you to display and input Chinese in bionicpup32 19.03-231231 and focalpup32 20.12-231231

(b) the 2 name+version number corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for bionicpup32 19.03-231231 and focalpup32 20.12-231231. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

II. icake combo live iso
I have also remastered 2 icake combo live isoes based on bionicpup32 19.03-231231 and focalpup32 20.12-231231 with all 7 Chinese input platforms above and 3 user interface languages:
icake32-BionicPup32-19.03-231231-est-fghirsy.iso (611 mb)
icake32-FocalPup32-20.12-231231-est-fghirsy.iso (635 mb)

so the total number of different systems created by each of the above icake combo live isoes is 21:
21 = 7 Chinese input platforms (fcitx, gcin, hime, ibus, rime, scim or yong) X 3 user interface languages (English, Simplified Chinese and Traditional Chinese)

more information about the fcitx, gcin, hime, ibus, ibus-rime, scim and yong pets, please see:
Documentation-and-Tools

peebee released jammypup32 22.04-231231 on Dec 31, 2023

for more information and discussions

download JammyPup32-22.04-231231.iso (390 mb)

I. icake language pets:
I have created 7 half-Chinese language txzes for jammypup32 22.04-231231:
fcitx Chinese input platform: fcitx32_4.2.9-en-zh-bionic-20.0.4.pet (27 mb)
gcin Chinese input platform: gcin32_2.8.2-en-zh-bionic-20.0.4.pet (5 mb)
hime Chinese input platform: hime32_0.9.11-en-zh-bionic-20.0.4.pet (5 mb)
ibus Chinese input platform: ibus32_1.5.17-en-zh-bionic-20.0.4.pet (33 mb)
rime Chinese input platform: ibus32-rime_1.2-en-zh-bionic-20.0.4.pet (130 mb)
scim Chinese input platform: scim32_1.4.18-en-zh-bionic-20.0.4.pet (17 mb)
yong Chinese input platform: yong32_2.5.0-en-zh-bionic-20.0.4.pet (10 mb)

Plus 2 Chinese language pets each for jammypup32 22.04-231231:
Simplified Chinese: jammypup32-22.04-231231-zhcn-20.0.4.pet (4 mb)

Traditional Chinese: jammypup32-22.04-231231-zhhk-20.0.4.pet (3 mb)

To use:
(a) any 1 of the 7 half-Chinese language pets will enable you to display and input Chinese in jammypup32 22.04-231231

(b) the 2 name+version number corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for jammypup32 22.04-231231. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

II. icake combo live iso
I have also remastered 1 icake combo live iso based on jammypup32 22.04-231231 with all 7 Chinese input platforms above and 3 user interface languages:
icake32-JammyPup32-22.04-231231-est-fghirsy.iso (637 mb)

so the total number of different systems created by the above icake combo live iso is 21:
21 = 7 Chinese input platforms (fcitx, gcin, hime, ibus, rime, scim or yong) X 3 user interface languages (English, Simplified Chinese and Traditional Chinese)

more information about the fcitx, gcin, hime, ibus, ibus-rime, scim and yong pets, please see:
Documentation-and-Tools

peebee released s15pup32 22.12-231231 and voidpup32 22.02-231231 on Dec 31, 2023

for more information and discussions

download S15Pup32-22.12-231231.iso (405 mb)
download VoidPup32-22.02-231231.iso (433 mb)

I. icake language pets:
I have created 7 half-Chinese language txzes for S15Pup32 22.12-231231 and voidpup32 22.02-231231:
fcitx Chinese input platform: fcitx_4.2.7-en-zh-raring-14.3.9.pet (20 mb)
gcin Chinese input platform: gcin32_2.9.0-en-zh-raring-14.3.9.pet (21 mb)
hime Chinese input platform: hime32_0.9.11-en-zh-raring-14.3.9.pet (18 mb)
ibus Chinese input platform: ibus32_1.5.19-en-zh-raring-14.3.9.pet (39 mb)
rime Chinese input platform: ibus32-rime_1.2-en-zh-raring-14.3.9.pet (130 mb)
scim Chinese input platform: scim_1.4.14-en-zh-raring-14.3.9.pet (15 mb)
yong Chinese input platform: yong32_2.5.0-en-zh-raring-14.3.9.pet (10 mb)

Plus 2 Chinese language pets each for S15Pup32 22.12-231231 and voidpup32 22.02-231231:
Simplified Chinese:
s15pup32-22.12-231231-zhcn-14.3.9.pet (4 mb)
voidpup32-22.02-231231-zhcn-14.3.9.pet (3 mb)

Traditional Chinese:
s15pup32-22.12-231231-zhhk-14.3.9.pet (3 mb)
voidpup32-22.02-231231-zhhk-14.3.9.pet (3 mb)

To use:
(a) any 1 of the 7 half-Chinese language pets will enable you to display and input Chinese in S15Pup32 22.12-231231 and voidpup32 22.02-231231

(b) the 2 name+version number corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for S15Pup32 22.12-231231 and voidpup32 22.02-231231. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

II. icake combo live iso
I have also remastered 2 icake combo live isoes based on S15Pup32 22.12-231231 and voidpup32 22.02-231231 with all 7 Chinese input platforms above and 3 user interface languages:
icake32-S15Pup32-22.12-231231-est-fghirsy.iso (671 mb)
icake32-VoidPup32-22.02-231231-est-fghirsy.iso (746 mb)

so the total number of different systems created by each of the above icake combo live iso is 21:
21 = 7 Chinese input platforms (fcitx, gcin, hime, ibus, rime, scim or yong) X 3 user interface languages (English, Simplified Chinese and Traditional Chinese)

more information about the fcitx, gcin, hime, ibus, ibus-rime, scim and yong pets, please see:
Documentation-and-Tools

peebee released s15pup64 22.12-231231 on Dec 31, 2023

for more information and discussions

download S15Pup64-22.12-231231.iso (432 mb)

I. icake language pets:
I have created 6 half-Chinese language txzes for S15Pup64 22.12-231231:
fcitx Chinese input platform: fcitx64_4.2.7-en-zh-raring-14.0.9.pet (16 mb)
gcin Chinese input platform: gcin64_2.8.2-en-zh-raring-14.0.9.pet (7 mb)
hime Chinese input platform: hime64_0.9.11-en-zh-raring-14.0.9.pet (6 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-raring-14.0.9.pet (53 mb)
scim Chinese input platform: scim64_1.4.14-en-zh-raring-14.0.9.pet (13 mb)
yong Chinese input platform: yong64_2.5.0-en-zh-raring-14.0.9.pet (10 mb)

Plus 2 Chinese language pets each for S15Pup64 22.12-231231:
Simplified Chinese: s15pup64-22.12-231231-zhcn-14.0.9.pet (4 mb)

Traditional Chinese: s15pup64-22.12-231231-zhhk-14.0.9.pet (3 mb)

To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in S15Pup64 22.12-231231

(b) the 2 name+version number corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for S15Pup64 22.12-231231. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

II. icake combo live iso
I have also remastered 1 icake combo live iso based on S15Pup64 22.12-231231 with all 6 Chinese input platforms above and 3 user interface languages:
icake64-S15Pup64-22.12-231231-est-fghisy.iso (599 mb)

so the total number of different systems created by the above icake combo live iso is 18:
18 = 6 Chinese input platforms (fcitx, gcin, hime, ibus, scim or yong) X 3 user interface languages (English, Simplified Chinese and Traditional Chinese)

more information about the fcitx, gcin, hime, ibus, scim and yong pets, please see:
Documentation-and-Tools

peebee released voidpup64 22.02-231231 on Dec 31, 2023

for more information and discussions

download VoidPup64-22.02-231231.iso (454 mb)

I. icake language pets:
I have created 6 half-Chinese language txzes for VoidPup64 22.02-231231:
fcitx Chinese input platform: fcitx64_4.2.7-en-zh-bionic-21.0.7.pet (16 mb)
gcin Chinese input platform: gcin64_2.9.0-en-zh-bionic-21.0.7.pet (7 mb)
hime Chinese input platform: hime64_0.9.11-en-zh-bionic-21.0.7.pet (6 mb)
ibus Chinese input platform: ibus64_1.5.23-en-zh-bionic-21.0.7.pet (55 mb)
scim Chinese input platform: scim64_1.4.14-en-zh-bionic-21.0.7.pet (13 mb)
yong Chinese input platform: yong64_2.5.0-en-zh-bionic-21.0.7.pet (10 mb)

Plus 2 Chinese language pets each for VoidPup64 22.02-231231:
Simplified Chinese: voidpup64-22.02-231231-zhcn-21.0.7.pet (4 mb)

Traditional Chinese: voidpup64-22.02-231231-zhhk-21.0.7.pet (3 mb)

To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in VoidPup64 22.02-231231

(b) the 2 name+version number corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for VoidPup64 22.02-231231. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

II. icake combo live iso
I have also remastered 1 icake combo live iso based on VoidPup64 22.02-231231 with all 6 Chinese input platforms above and 3 user interface languages:
icake64-VoidPup64-22.02-231231-est-fghisy.iso (677 mb)

so the total number of different systems created by the above icake combo live iso is 18:
18 = 6 Chinese input platforms (fcitx, gcin, hime, ibus, scim or yong) X 3 user interface languages (English, Simplified Chinese and Traditional Chinese)

more information about the fcitx, gcin, hime, ibus, scim and yong pets, please see:
Documentation-and-Tools

radky released Bookworm Pup64 10.0.4 on Dec 27, 2023

for more information and discussions

download BookwormPup64_10.0.4.iso (778 mb)

I have created 7 half-Chinese language pets for Bookworm Pup64 10.0.4:
fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bookworm-21.8.0.pet (19 mb)
gcin Chinese input platform: gcin64_2.8.2-en-zh-bookworm-21.8.0.pet (6 mb)
hime Chinese input platform: hime64_0.9.11-en-zh-bookworm-21.8.0.pet (6 mb)
ibus Chinese input platform: ibus64_1.5.27-en-zh-bookworm-21.8.0.pet (78 mb)
rime Chinese input platform: ibus64-rime_1.5.0-en-zh-bookworm-21.8.0.pet (78 mb)
scim Chinese input platform: scim64_1.4.9-en-zh-bookworm-21.8.0.pet (14 mb)
yong Chinese input platform: yong64_2.5.0-en-zh-bookworm-21.8.0.pet (10 mb)

Plus 2 Chinese language pets each for Bookworm Pup64 10.0.4:
Simplified Chinese: BookwormPup64-10.0.4-zhcn-21.8.0.pet (4 mb)
Traditional Chinese: BookwormPup64-10.0.4-zhhk-21.8.0.pet (3 mb)

To use:
(a) any 1 of the 7 half-Chinese language pets will enable you to display and input Chinese in Bookworm Pup64 10.0.4

(b) the 2 name+version number corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for Bookworm Pup64 10.0.4. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

more information about the fcitx, gcin, hime, ibus, rime, scim and yong pets, please see:
Documentation-and-Tools

BarryK released EasyOS Kirkstone-series version 5.6.5 on Dec 6, 2023; 5.6.6 on Jan 30, 2024; 5.6.7 on Jan 31, 2024; 5.7 on Feb 3, 2024

for more information and discussions

download easy-5.6.5-amd64.img (857 mb)
download easy-5.6.6-amd64.img (857 mb)
download easy-5.6.7-amd64.img (857 mb)
download easy-5.7-amd64.img (857 mb)

I have created 6 half-Chinese language pets for EasyOS Kirkstone-series versions 5.6.5 to 5.7:
fcitx Chinese input platform: fcitx64_4.2.7-en-zh-bionic-21.2.7.pet (16 mb)
gcin Chinese input platform: gcin64_2.9.0-en-zh-bionic-21.2.7.pet (10 mb)
hime Chinese input platform: hime64_0.9.11-en-zh-bionic-21.2.7.pet (8 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.2.7.pet (35 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-21.2.7.pet (10 mb)
corrected Aug 13, 2023: yong Chinese input platform: yong3264_20201122-en-zh-bionic-21.2.7.pet (10 mb)

Plus 2 Chinese language pets each for EasyOS Kirkstone-series version 5.6.5 to 5.7:
Simplified Chinese:
easykirkstone-5.6.5-zhcn-21.2.7.pet (4 mb)
easykirkstone-5.6.6-zhcn-21.2.7.pet (4 mb)
easykirkstone-5.6.7-zhcn-21.2.7.pet (4 mb)
easykirkstone-5.7-zhcn-21.2.7.pet (4 mb)

Traditional Chinese:
easykirkstone-5.6.5-zhhk-21.2.7.pet (4 mb)
easykirkstone-5.6.6-zhhk-21.2.7.pet (4 mb)
easykirkstone-5.6.7-zhhk-21.2.7.pet (4 mb)
easykirkstone-5.7-zhhk-21.2.7.pet (4 mb)

To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in EasyOS Kirkstone-series versions 5.6.5 to 5.7

(b) the 2 name+version number corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for EasyOS Kirkstone-series versions 5.6.5 to 5.7. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

more information about the fcitx, gcin, hime, ibus, scim and yong pets, please see the first posting of this subject

BarryK released EasyOS Void-series version 6.0 on Jan 19, 2024; 6.0.1 on Jan 21, 2024

for more information and discussions

download easy-6.0-amd64.img (889 mb) and easy-6.0.1-amd64.img (889 mb)

I have created 7 half-Chinese language pets for EasyOS Void-series versions 6.0 to 6.0.1:
fcitx Chinese input platform: fcitx64_4.2.7-en-zh-bionic-21.4.0.pet (15 mb)
gcin Chinese input platform: gcin64_2.9.0-en-zh-bionic-21.4.0.pet (6 mb)
hime Chinese input platform: hime64_0.9.11-en-zh-bionic-21.4.0.pet (5 mb)
ibus Chinese input platform: ibus64_1.5.23-en-zh-bionic-21.4.0.pet (55 mb)
ibus-rime Chinese input platform: ibus64-rime_1.4.0-en-zh-bionic-21.4.0.pet (112 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-21.4.0.pet (17 mb)
yong Chinese input platform: yong64_2.5.0-en-zh-bionic-21.4.0.pet (10 mb)

Plus 2 Chinese language pets each for EasyOS Void-series versions 6.0 to 6.0.1:
Simplified Chinese:
easyvoid-6.0.0-zhcn-21.4.0.pet (9 mb)
easyvoid-6.0.1-zhcn-21.4.0.pet (9 mb)

Traditional Chinese:
easyvoid-6.0.0-zhhk-21.4.0.pet (7 mb)
easyvoid-6.0.1-zhhk-21.4.0.pet (7 mb)

To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in EasyOS Void-series versions 6.0 to 6.0.1

(b) the 2 name+version number corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for EasyOS Void-series versions 6.0 to 6.0.1. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

more information about the fcitx, gcin, hime, ibus, ibus-rime, scim and yong pets, please see the first posting of this subject

peebee released ManticPup32 23.10+2 on Dec 26, 2023

for more information and discussions

download ManticPup32-23.10+2.iso （357 mb）

I have created 6 half-Chinese language pets for ManticPup32 23.10+2:
fcitx Chinese input platform: fcitx32_4.2.9-en-zh-bionic-20.0.4.pet (27 mb)
gcin Chinese input platform: gcin32_2.8.2-en-zh-bionic-20.0.4.pet (5 mb)
hime Chinese input platform: hime32_0.9.11-en-zh-bionic-20.0.4.pet (5 mb)
ibus Chinese input platform: ibus32_1.5.17-en-zh-bionic-20.0.4.pet (33 mb)
scim Chinese input platform: scim32_1.4.18-en-zh-bionic-20.0.4.pet (17 mb)
yong Chinese input platform: yong32_2.5.0-en-zh-bionic-20.0.4.pet (10 mb)

Plus 2 Chinese language pets for ManticPup32 23.10+2:
Simplified Chinese:
manticpup32-23.10.02-zhcn-20.0.4.pet (4 mb)

Traditional Chinese:
manticpup32-23.10.02-zhhk-20.0.4.pet (3 mb)

To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in manticPup32 23.10+2

(b) the 2 name+version number corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for manticPup32 23.10+2. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

more information about the fcitx, gcin, hime, ibus, ibus-rime, scim and yong pets, please see the first posting of this subject

ozsouth released Bionicpup64-23 early 2024 and 23v2 on Feb 21, 2024

for more information, discussions

download Bionicpup64-8.0-uefi-23v2.iso (388 mb)

I have created 5 half-Chinese language pets for bionicpup64 8.0-23 and 23v2:
fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-21.0.2.pet (22 mb)
gcin Chinese input platform: gcin64_2.8.2-en-zh-bionic-21.0.2.pet (7 mb)
hime Chinese input platform: hime64_0.9.10-en-zh-bionic-21.0.2.pet (10 mb)
scim Chinese input platform: scim64_1.4.14-en-zh-bionic-21.0.2.pet (13 mb)
yong Chinese input platform: yong64_2.5.0-en-zh-bionic-21.0.2.pet (9 mb)

Plus 2 Chinese language pets each for bionicpup64 8.0-23 and 23v2:
Simplified Chinese:
bionicpup64-8.0-uefi-23-zhcn-21.0.2.pet (3 mb)
bionicpup64-8.0-uefi-23v2-zhcn-21.0.2.pet (3 mb)
Traditional Chinese:
bionicpup64-8.0-uefi-23-zhhk-21.0.2.pet (3 mb)
bionicpup64-8.0-uefi-23v2-zhhk-21.0.2.pet (3 mb)

To use:
(a) any 1 of the 5 half-Chinese language pets will enable you to display and input Chinese in bionicpup64 8.0-23 and 23v2

(b) the 2 name+version number corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for bionicpup64 8.0-23 and 23v2. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

more information about the fcitx, gcin, hime, scim and yong pets, please see the first posting of this subject

radky released Bookworm Pup64 10.0.5 on Feb 27, 2024; 10.0.6 on Mar 5, 2024

for more information and discussions

download BookwormPup64_10.0.5.iso (778 mb)
download BookwormPup64_10.0.6.iso (778 mb)

I have created 7 half-Chinese language pets for Bookworm Pup64 10.0.5 and 10.0.6:
fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bookworm-21.8.0.pet (19 mb)
gcin Chinese input platform: gcin64_2.8.2-en-zh-bookworm-21.8.0.pet (6 mb)
hime Chinese input platform: hime64_0.9.11-en-zh-bookworm-21.8.0.pet (6 mb)
ibus Chinese input platform: ibus64_1.5.27-en-zh-bookworm-21.8.0.pet (78 mb)
rime Chinese input platform: ibus64-rime_1.5.0-en-zh-bookworm-21.8.0.pet (78 mb)
scim Chinese input platform: scim64_1.4.9-en-zh-bookworm-21.8.0.pet (14 mb)
yong Chinese input platform: yong64_2.5.0-en-zh-bookworm-21.8.0.pet (10 mb)

Plus 2 Chinese language pets each for Bookworm Pup64 10.0.5 and 10.0.6:
Simplified Chinese:
BookwormPup64-10.0.5-zhcn-21.8.0.pet (4 mb)
BookwormPup64-10.0.6-zhcn-21.8.0.pet (4 mb)
Traditional Chinese:
BookwormPup64-10.0.5-zhcn-21.8.0.pet (3 mb)
BookwormPup64-10.0.6-zhcn-21.8.0.pet (3 mb)

To use:
(a) any 1 of the 7 half-Chinese language pets will enable you to display and input Chinese in Bookworm Pup64 10.0.5 and 10.0.6

(b) the 2 name+version number corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for Bookworm Pup64 10.0.5 and 10.0.6. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

more information about the fcitx, gcin, hime, ibus, rime, scim and yong pets, please see:
Documentation-and-Tools