Puppy Linux Discussion Forum

barry k released easy bookworm 0.1 on May 12, 2022 and 0.3 on May 20, 2022

more information and discussions:
https://forum.puppylinux.com/viewtopic.php?t=5952

download iso:
easy-0.1-amd64.img: https://distro.ibiblio.org/easyos/amd64 ... /2022/0.1/
easy-0.3-amd64.img: https://distro.ibiblio.org/easyos/amd64 ... /2022/0.3/

I have created these half-Chinese language pets for easybookworm 0.1 and 0.3:
fcitx Chinese input platform: fcitx64_4.2.7-en-zh-bionic-21.1.7.pet (14 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.1.7.pet (38 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-21.1.7.pet (12 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-21.1.7.pet (10 mb)

Plus 2 Chinese language pets each for easybookworm 0.1 and 0.3:
Simplified Chinese:
easybookworm-0.1-zhcn-21.1.7.pet (4 mb)
easybookworm-0.3-zhcn-21.1.7.pet (4 mb)

Traditional Chinese:
easybookworm-0.1-zhhk-21.1.7.pet (3 mb)
easybookworm-0.3-zhhk-21.1.7.pet (3 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in easybookworm 0.1 and 0.3

(b) the 2 name+version number corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for easybookworm 0.1 and 0.3. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

more information about the fcitx, ibus, scim and yong pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

norgo released slacko64-8.2.2 on May 1, 2022

more information and discussions:
https://forum.puppylinux.com/viewtopic. ... &start=120

download slacko64-8.2.2.iso: https://smokey01.com/norgo/slacko/000/000.php

I have created 4 half-Chinese language pets for slacko64-8.2.2:
fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-21.2.4.pet (18 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.2.4.pet (35 mb)
scim Chinese input platform: scim64_1.4.9-en-zh-bionic-21.2.4.pet (14 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-21.2.4.pet (9 mb)

Plus 2 Chinese language pets each for slacko64-8.2.1:
Simplified Chinese: slacko64-8.2.1-zhcn-21.2.4.pet (4 mb)
Traditional Chinese: slacko64-8.2.1-zhhk-21.2.4.pet (3 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in slacko64-8.2.2

(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pet) or Traditional Chinese (use zhhk pet) desktop menus, icon labels, tooltips for slacko64-8.2.2. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

For more information about the fcitx, ibus, scim and yong half-Chinese language pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

csipesz released Fossa64Pup9.5K5.4.3DVDEditionEngHun2022MayCsipesz.iso (4.5G) on May 17, 2022

discussions and information: https://forum.puppylinux.com/viewtopic.php?p=57581

download Fossa64Pup9.5K5.4.3DVDEditionEngHun2022MayCsipesz.iso: https://drive.google.com/file/d/1w7H_sg ... NmroB/view

I have created 4 half-Chinese language pets for Fossa64Pup9.5K5.4.3DVDEditionEngHun2022MayCsipesz:
fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-23.0.2.pet (18 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-23.0.2.pet (30 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-23.0.2.pet (15 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-23.0.2.pet (10 mb)

Plus 2 Chinese language pets each for Fossa64Pup9.5K5.4.3DVDEditionEngHun2022MayCsipesz:
Simplified Chinese: fossapup64-9.5.0dvd.2022may-zhcn-23.0.2.pet (5 mb)
Traditional Chinese: fossapup64-9.5.0dvd.2022may-zhhk-23.0.2.pet (4 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in fossapup64-9.5.0dvd.2022may

(b) the 2 name+version number corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for fossapup64-9.5.0dvd.2022may. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

more information about the fcitx, ibus, scim and yong pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

BarryK has released EasyOS Dunfell-series 3.4.7 on Apr 27, 2022

more information and annoucement notes: https://bkhome.org/news/202204/easyos-v ... eased.html

download addresses: https://distro.ibiblio.org/easyos/amd64 ... ell/3.4.7/

I have created these half-Chinese language pets for easydunfell 3.4.7:
fcitx Chinese input platform: fcitx64_4.2.7-en-zh-bionic-21.2.7.pet (14 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.2.7.pet (35 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-21.2.7.pet (10 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-21.2.7.pet (9 mb)

Please note that ibus Chinese input platform cannot input Chinese in Libreoffice 7 and seamonkey browser that comes with easyos dunfell 3.4.7. If you want to run a browser with ibus, please try light and palemoon (28.4.0).

Plus 2 Chinese language pets each for easydunfell 3.4.7:
Simplified Chinese: easydunfell-3.4.7-zhcn-21.2.7.pet (4 mb)
Traditional Chinese: easydunfell-3.4.7-zhhk-21.2.7.pet (3 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in easydunfell 3.4.7

(b) the 2 name+version number corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for easydunfell 3.4.7. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

more information about the fcitx, ibus, scim and yong pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

peebee recently released VoidPup32 and VoidPup64: 22.02+3; 22.02+4 and 22.02+5

More information and discussions: https://forum.puppylinux.com/viewtopic.php?t=5016

Download isoes: https://sourceforge.net/projects/vpup/f ... o/download

I have created these half-Chinese language pets for VoidPup32 and VoidPup64 22.02+3 to +5:
x86_64:
fcitx Chinese input platform: fcitx64_4.2.7-en-zh-bionic-21.0.3f.pet (12 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-21.0.3f.pet (12 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-21.0.3f.pet (8 mb)

x86:
fcitx Chinese input platform: fcitx_4.2.9-en-zh-bionic-20.1.2.pet (22 mb)
ibus Chinese input platform: ibus_1.5.17-en-zh-bionic-20.1.2.pet (34 mb)
scim Chinese input platform: scim_1.4.18-en-zh-bionic-20.1.2.pet (16 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-20.1.2.pet (8 mb)

Plus 2 Chinese language pets each for VoidPup32 and VoidPup64 22.02+3 to +5 :
x86_64:
Simplified Chinese:
voidpup64-22.02.05-zhcn-21.0.3f.pet (4 mb)
voidpup64-22.02.04-zhcn-21.0.3f.pet (4 mb)
voidpup64-22.02.03-zhcn-21.0.3f.pet (4 mb)

Traditional Chinese:
voidpup64-22.02.05-zhhk-21.0.3f.pet (3 mb)
voidpup64-22.02.04-zhhk-21.0.3f.pet (3 mb)
voidpup64-22.02.03-zhhk-21.0.3f.pet (3 mb)

x86:
Simplified Chinese:
voidpup-22.02.05-zhcn-20.1.2.pet (3 mb)
voidpup-22.02.04-zhcn-20.1.2.pet (3 mb)
voidpup-22.02.03-zhcn-20.1.2.pet (3 mb)

Traditional Chinese:
voidpup-22.02.05-zhhk-20.1.2.pet (3 mb)
voidpup-22.02.04-zhhk-20.1.2.pet (3 mb)
voidpup-22.02.03-zhhk-20.1.2.pet (3 mb)

To use:
(a) any 1 of the half-Chinese language pets will enable you to display and input Chinese in VoidPup64 22.02.03 to 22.02.05（use 21.0.3f pets）and VoidPup32 22.02.03 to 22.02.05 (use 20.1.2 pets）

(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for VoidPup32 and VoidPup64 22.02+3 to +5. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

For more information about the fcitx, ibus, scim and yong half-Chinese language pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

friendly-bionic32-rc3 was released by wiard on Feb 14, 2022

more information and discussions: [/url]https://forum.puppylinux.com/viewtopic.php?t=5188[/url]

download friendly-fossa64-rc3.iso: [/url]https://sourceforge.net/projects/friend ... o/download[/url]

I have created 4 half-Chinese language pets for friendly bionic32 rc3:
fcitx Chinese input platform: fcitx_4.2.7-en-zh-bionic-20.0.1f.pet (16 mb)
ibus Chinese input platform: ibus_1.5.17-en-zh-bionic-20.0.1f.pet (28 mb)
scim Chinese input platform: scim_1.4.18-en-zh-bionic-20.0.1f.pet (15 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-20.0.1f.pet (8 mb)

Plus 2 Chinese language pets each for friendly bionic32 rc3:
Simplified Chinese: friendly-bionicpup-rc3-zhcn-20.0.1f.pet (8 mb)
Traditional Chinese: friendly-bionicpup-rc3-zhhk-20.0.1f.pet (7 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in friendly bionic32 rc3

(b) the name+version number corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for friendly bionic32 rc3. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

for more information about the fcitx, ibus, scim and yong half-Chinese pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

mistfire has recently released QuickPup64 22.01 beta12 (May 26, 2022), beta13 (Jun 7, 2021) and beta14 (Jun 12, 2021)

More information and forum discussions: https://forum.puppylinux.com/viewtopic. ... &start=173

Download iso:
quickpup64_22.01-beta-12.iso: https://drive.google.com/file/d/1sE73sJ ... L24OA1HNa5
quickpup64_22.01-beta-13.iso: https://drive.google.com/file/d/1X4-zTd ... YYvjuzUOLI
quickpup64_22.01-beta-14.iso: https://drive.google.com/file/d/1gKW5Xe ... GbkRmgpo1t

I have created 4 half-Chinese language pets for QuickPup 22.01 beta12 to 14:

fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-21.2.5.pet (14 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.2.5.pet (33 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-21.2.5.pet (16 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-21.2.5.pet (8 mb)

Plus 4 Chinese language pets each for QuickPup 22.01 beta9 and 11:
Simplified Chinese:
quickpup64-22.01beta12-zhcn-21.2.5.pet (3 mb)
quickpup64-22.01beta13-zhcn-21.2.5.pet (3 mb)
quickpup64-22.01beta14-zhcn-21.2.5.pet (3 mb)

Traditional Chinese:
quickpup64-22.01beta12-zhhk-21.2.5.pet (3 mb)
quickpup64-22.01beta13-zhhk-21.2.5.pet (3 mb)
quickpup64-22.01beta14-zhhk-21.2.5.pet (3 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in QuickPup 22.01 beta12 to 14

(b) the name+version number corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for QuickPup 22.01 beta12 to 14. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

for more information about the fcitx, ibus, scim and yong half-Chinese pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

dimkr recently released Vanilla Dpup 9.2.0 preview 7 and preview 16 (both x86 and x86_64)

More information: https://forum.puppylinux.com/viewtopic.php?t=4093

Download iso:
https://vanilla-dpup.github.io
https://github.com/vanilla-dpup/releases/releases

I have created 4 half-Chinese language pets each for Vanilla Dpup 9.2.0 preview 7 and preview 16 (both x86_64 and x86):
x86_64:
fcitx Chinese input platform: fcitx64_4.2.7-en-zh-bionic-21.1.2s.pet (15 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.1.2s.pet (39 mb)
scim Chinese input platform: scim64_1.4.14-en-zh-bionic-21.1.2s.pet (13 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-21.1.2s.pet (9 mb)

x86:
fcitx Chinese input platform: fcitx_4.2.７-en-zh-bionic-20.1.1s.pet (19 mb)
ibus Chinese input platform: ibus_1.5.17-en-zh-bionic-20.1.1s.pet (36 mb)
scim Chinese input platform: scim_1.4.14-en-zh-bionic-20.1.1s.pet (13 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-20.1.1s.pet (9 mb)

Plus 2 Chinese language pets each for Vanilla Dpup 9.2.0 preview 7 and preview 16 (both x86_64 and x86):
x86_64:
Simplified Chinese:
vanilladpup64-9.2.0p7-zhcn-21.1.2s.pet (3 mb)
vanilladpup64-9.2.0p16-zhcn-21.1.2s.pet (3 mb)

Traditional Chinese:
vanilladpup64-9.2.0p7-zhhk-21.1.2s.pet (3 mb)
vanilladpup64-9.2.0p16-zhhk-21.1.2s.pet (3 mb)

x86:
Simplified Chinese:
vanilladpup-9.2.0p7-zhcn-20.1.1s.pet (3 mb)
vanilladpup-9.2.0p16-zhcn-20.1.1s.pet (3 mb)

Traditional Chinese:
vanilladpup-9.2.0p7-zhhk-20.1.1s.pet (2 mb)
vanilladpup-9.2.0p16-zhhk-20.1.1s.pet (2 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in x86_64 Vanilla Dpup 9.2.0 preview 7 and preview 16（use 21.1.2s pets）and x86 Vanilla Dpup 9.2.0 preview 7 and preview 16 (use 20.1.1s pets）

(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for x86_64 Vanilla Dpup 9.2.0 preview 7 and preview 16 (both x86 and x86_64). Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

For more information about the fcitx, ibus, scim and yong half-Chinese language pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

peebee recently released VoidPup32 and VoidPup64: 22.02+6

More information and discussions: https://forum.puppylinux.com/viewtopic.php?t=5016

Download isoes: https://sourceforge.net/projects/vpup/f ... o/download

I have created these half-Chinese language pets for VoidPup32 and VoidPup64 22.02+6:
x86_64:
fcitx Chinese input platform: fcitx64_4.2.7-en-zh-bionic-21.0.3f.pet (12 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-21.0.3f.pet (12 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-21.0.3f.pet (8 mb)

x86:
fcitx Chinese input platform: fcitx_4.2.9-en-zh-bionic-20.1.2.pet (22 mb)
ibus Chinese input platform: ibus_1.5.17-en-zh-bionic-20.1.2.pet (34 mb)
scim Chinese input platform: scim_1.4.18-en-zh-bionic-20.1.2.pet (16 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-20.1.2.pet (8 mb)

Plus 2 Chinese language pets each for VoidPup32 and VoidPup64 22.02+6:
x86_64:
Simplified Chinese: voidpup64-22.02.06-zhcn-21.0.3f.pet (4 mb)
Traditional Chinese: voidpup64-22.02.06-zhhk-21.0.3f.pet (3 mb)

x86:
Simplified Chinese: voidpup-22.02.06-zhcn-20.1.2.pet (3 mb)
Traditional Chinese: voidpup-22.02.06-zhhk-20.1.2.pet (3 mb)

To use:
(a) any 1 of the half-Chinese language pets will enable you to display and input Chinese in VoidPup64 22.02.06（use 21.0.3f pets）and VoidPup32 22.02.06 (use 20.1.2 pets）

(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for VoidPup32 and VoidPup64 22.02+6. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

For more information about the fcitx, ibus, scim and yong half-Chinese language pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

peebee released JammyPup32 22.04+3 (UPupJJ+D-22.04+3) on May 12, 2022

more information and discussions: https://forum.puppylinux.com/viewtopic.php?t=5799

download JammyPup32-22.04+3 iso: http://distro.ibiblio.org/puppylinux/pu ... -22.04.htm

I have created 4 half-Chinese language pets each for jammypup32 22.04.03:
fcitx Chinese input platform: fcitx_4.2.７-en-zh-bionic-14.3.8.pet (17 mb)
ibus Chinese input platform: ibus_1.5.17-en-zh-bionic-14.3.8.pet (34 mb)
scim Chinese input platform: scim_1.4.14-en-zh-bionic-14.3.8.pet (14 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-14.3.8.pet (9 mb)

Plus 2 Chinese language pets for jammypup32 22.04.03:
Simplified Chinese: jammypup-22.04.03-zhcn-14.3.8.pet (4 mb)
Traditional Chinese: jammypup-22.04.03-zhhk-14.3.8.pet (4 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in jammypup32 22.04.03

(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for jammypup32 22.04.03. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

For more information about the fcitx, ibus, scim and yong half-Chinese language pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

jackpal-0.0-rc3-uefi was released by puddlemoon on Jun 9, 2022

discussions and information: https://forum.puppylinux.com/viewtopic. ... 8&start=98

download jackpal-0.0-rc3-uefi.iso (1.3 Gb): https://archive.org/download/jackalpup/ ... 3-uefi.iso

I have created 4 half-Chinese language pets for jackpal-0.0-rc3:
fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-23.0.0s.pet (19 mb)
ibus Chinese input platform: ibus64_1.5.23-en-zh-bionic-23.0.0s.pet (27 mb)
scim Chinese input platform: scim64_1.4.9-en-zh-bionic-23.0.0s.pet (12 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-23.0.0s.pet (8 mb)

Plus 2 Chinese language pets for jackpal-0.0-rc3:
Simplified Chinese: jackalpup64-0.0-rc3-zhcn-23.0.0s.pet (2 mb)
Traditional Chinese: jackalpup64-0.0-rc3-zhhk-23.0.0s.pet (2 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in jackalpup 0.0 rc3

(b) the 2 Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for jackalpup 0.0 rc3. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

for more information about the fcitx64, ibus64, scim64 and yong3264 pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

wizard first released Friendly-fossa64 rc4 on Jun 10, 2022

more information and discussions: https://forum.puppylinux.com/viewtopic.php?t=4681

download friendly-fossa64-rc4.iso: https://sourceforge.net/projects/friend ... o/download

I have created 4 half-Chinese language pets for friendly fossa64 rc4:
fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-23.0.2.pet (18 mb)
ibus Chinese input platform: ibus64_1.5.23-en-zh-bionic-23.0.2.pet (33 mb)
scim Chinese input platform: scim64_1.4.9-en-zh-bionic-23.0.2.pet (15 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-23.0.2.pet (8 mb)

Plus 4 Chinese language pets each for friendly fossa64 rc1 to 3:
Simplified Chinese: fossapup64_friendly_rc4-9.5.0-zhcn-23.0.2.pet (4 mb)
Traditional Chinese: fossapup64_friendly_rc4-9.5.0-zhhk-23.0.2.pet (3 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in friendly fossa64 rc4

(b) the name+version number corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for friendly fossa64 rc4. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

for more information about the fcitx, ibus, scim and yong half-Chinese pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

peebee released JammyPup32 22.04+4 on Jun 26, 2022

more information and discussions: https://forum.puppylinux.com/viewtopic.php?t=5799

download JammyPup-22.04+4.iso (328 mb): http://distro.ibiblio.org/puppylinux/pu ... -22.04.htm

I have created 4 half-Chinese language pets each for jammypup32 22.04.04:
fcitx Chinese input platform: fcitx_4.2.７-en-zh-bionic-14.3.8.pet (17 mb)
ibus Chinese input platform: ibus_1.5.17-en-zh-bionic-14.3.8.pet (34 mb)
scim Chinese input platform: scim_1.4.14-en-zh-bionic-14.3.8.pet (14 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-14.3.8.pet (9 mb)

Plus 2 Chinese language pets each for jammypup32 22.04.04:
Simplified Chinese: jammypup-22.04.04-zhcn-14.3.8.pet (4 mb)
Traditional Chinese: jammypup-22.04.04-zhhk-14.3.8.pet (4 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in jammypup32 22.04.04

(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for jammypup32 22.04.04. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

For more information about the fcitx, ibus, scim and yong half-Chinese language pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

exton released PuppEX Slack64 15.0 build 220625 on Jun 25, 2022

more information and discussions: https://forum.puppylinux.com/viewtopic.php?t=6218

download puppex-slack64-15.0-uefi-554mb-220625.iso (567 mb): https://sourceforge.net/projects/puppex/

I have created 4 half-Chinese language pets for Slack64 15.0 build 220625:
fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-21.2.4.pet (18 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.2.4.pet (35 mb)
scim Chinese input platform: scim64_1.4.9-en-zh-bionic-21.2.4.pet (14 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-21.2.4.pet (9 mb)

Plus 2 Chinese language pets each for Slack64 15.0 build 220625:
Simplified Chinese: puppex-slacko64-15.0.220625-zhcn-21.2.4.pet (4 mb)
Traditional Chinese: puppex-slacko64-15.0.220625-zhhk-21.2.4.pet (3 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in Slack64 15.0 build 220625

(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pet) or Traditional Chinese (use zhhk pet) desktop menus, icon labels, tooltips for Slack64 15.0 build 220625. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

For more information about the fcitx, ibus, scim and yong half-Chinese language pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

exton released 2 PuppEX Bookworm64 on Jul 14, 2022

more news and information:
https://forum.puppylinux.com/viewtopic.php?t=6338
https://puppex.exton.net

download isoes:
puppex-bookworm64-uefi-1070mb-220714.iso (1070 mb)
puppex-bookworm64-non-uefi-vbox-ddog-903mb-220714.iso (903 mb)

[url]https://sourceforge.net/projects/puppex/files//[url]

I have created 4 Half-Chinese deb each for puppex bookworm64 220714 (uefi and non-uefi) systems:

fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-121.6.4.deb (18 mb)
ibus Chinese input platform: ibus64_1.5.25-en-zh-bionic-121.6.4.pet (36 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-121.6.4.pet (9 mb)
yong Chinese input platform: yong64_1.5.25-en-zh-bionic-121.6.4.pet (8 mb)

Plus 2 Chinese language debs for puppex bookworm64 220714 (applicable to both uefi and non-uefi) systems:
Simplified Chinese: puppex.bookworm64.220714-zhcn-121.6.4.deb (3 mb)
Traditional Chinese: puppex.bookworm64.220714-zhhk-121.6.4.deb (2 mb)

To use:
(a) the half-Chinese language deb will enable you to display and input Chinese in puppex bookworm64 220714 (uefi and non-uefi)

(b) the name+version corresponding Chinese language pets will give you Simplified Chinese (zhcn deb) or Traditional Chinese (zhhk deb) menus, icon labels, tooltips for puppex bookworm64 220714 (uefi and non-uefi) systems. Please note that all Chinese language debs rely on a suitable half-Chinese language deb already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

for more information about the fcitx, ibus, scim and yong debs, please see the first posting of this subject （same as for fcitx pets）

Download addresses for these half-Chinese and Chinese language debs are also available in the first posting of this subject.

BarryK has released EasyOS Dunfell-series 4.1.0 on Jun 15, 2022; 4.2.0 on Jun 25, 2022; 4.2.2 on Jun 28, 2022; 4.2.3 on Jul 4, 2022 and 4.2.7 on Jul 18, 2022

more information and annoucement notes: https://forum.puppylinux.com/viewtopic.php?t=6355

download addresses:
https://distro.ibiblio.org/easyos/amd64 ... ell/4.2.7/
https://distro.ibiblio.org/easyos/amd64 ... ell/4.2.3/
https://distro.ibiblio.org/easyos/amd64 ... ell/4.2.2/
https://distro.ibiblio.org/easyos/amd64 ... ell/4.2.0/
https://distro.ibiblio.org/easyos/amd64 ... ell/4.1.0/

I have created these half-Chinese language pets for easydunfell 4.1.0 to 4.2.7:
fcitx Chinese input platform: fcitx64_4.2.7-en-zh-bionic-21.2.7.pet (14 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.2.7.pet (35 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-21.2.7.pet (10 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-21.2.7.pet (9 mb)

Please note that ibus Chinese input platform cannot input Chinese in Libreoffice 7 and seamonkey browser that comes with easyos dunfell 4.1.0 to 4.2.7.

If you want to run a browser with ibus, please try light and palemoon (28.4.0).

Plus 2 Chinese language pets each for easydunfell 4.1.0 to 4.2.7:
Simplified Chinese:
easydunfell-4.2.7-zhcn-21.2.7.pet (4 mb)
easydunfell-4.2.3-zhcn-21.2.7.pet (4 mb)
easydunfell-4.2.2-zhcn-21.2.7.pet (4 mb)
easydunfell-4.2.0-zhcn-21.2.7.pet (4 mb)
easydunfell-4.1.0-zhcn-21.2.7.pet (4 mb)

Traditional Chinese:
easydunfell-4.2.7-zhhk-21.2.7.pet (3 mb)
easydunfell-4.2.3-zhhk-21.2.7.pet (3 mb)
easydunfell-4.2.2-zhhk-21.2.7.pet (3 mb)
easydunfell-4.2.0-zhhk-21.2.7.pet (3 mb)
easydunfell-4.1.0-zhhk-21.2.7.pet (3 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in easydunfell 4.1.0 to 4.2.7

(b) the 2 name+version number corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for easydunfell 4.1.0 to 4.2.7. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

more information about the fcitx, ibus, scim and yong pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

mistfire has recently released QuickPup64 22.01 beta15 (Jun 25, 2022)

More information and forum discussions: https://forum.puppylinux.com/viewtopic. ... &start=199

Download quickpup64_22.01-beta-15.iso: https://drive.google.com/file/d/1lbKPDs ... 8CJJaLXWcq

I have created 4 half-Chinese language pets for QuickPup 22.01 beta15:

fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-21.2.5.pet (14 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.2.5.pet (33 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-21.2.5.pet (16 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-21.2.5.pet (8 mb)

Plus 4 Chinese language pets each for QuickPup 22.01 beta15 and 16:
Simplified Chinese:
quickpup64-22.01beta15-zhcn-21.2.5.pet (3 mb)

Traditional Chinese:
quickpup64-22.01beta15-zhhk-21.2.5.pet (3 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in QuickPup 22.01 beta15

(b) the name+version number corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets)

desktop menus, icon labels, tooltips for QuickPup 22.01 beta15. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

for more information about the fcitx, ibus, scim and yong half-Chinese pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

exton released PuppEX Jammy64 22.04 build 220630 on Jun 30, 2022

more information and discussions: https://forum.puppylinux.com/viewtopic.php?t=6254

download puppex-jammy64-uefi-628mb-220630.iso (658 mb): https://sourceforge.net/projects/puppex/

I have created 4 half-Chinese language pets for PuppEX Jammy64 22.04 build 220630:
fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-21.3.1.pet (14 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.3.1.pet (36 mb)
scim Chinese input platform: scim64_1.4.9-en-zh-bionic-21.3.1.pet (13 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-21.3.1.pet (9 mb)

Plus 2 Chinese language pets each for PuppEX Jammy64 22.04 build 220630:
Simplified Chinese: puppex-jammy64-220630-zhcn-21.3.1.pet (4 mb)
Traditional Chinese: puppex-jammy64-220630-zhhk-21.3.1.pet (3 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in PuppEX Jammy64 22.04 build 220630

(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pet) or Traditional Chinese (use zhhk pet) desktop menus, icon labels, tooltips for PuppEX Jammy64 22.04 build 220630. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

For more information about the fcitx, ibus, scim and yong half-Chinese language pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

dimkr recently released Vanilla Dpup 9.2.4 (both x86 and x86_64)

More information: https://forum.puppylinux.com/viewtopic.php?t=5039

Download iso:
https://vanilla-dpup.github.io
https://github.com/vanilla-dpup/releases/releases

I have created 4 half-Chinese language pets each for Vanilla Dpup 9.2.4 (both x86_64 and x86):
x86_64:
fcitx Chinese input platform: fcitx64_4.2.7-en-zh-bionic-21.1.2s.pet (15 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.1.2s.pet (39 mb)
scim Chinese input platform: scim64_1.4.14-en-zh-bionic-21.1.2s.pet (13 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-21.1.2s.pet (9 mb)

x86:
fcitx Chinese input platform: fcitx_4.2.７-en-zh-bionic-20.1.1s.pet (19 mb)
ibus Chinese input platform: ibus_1.5.17-en-zh-bionic-20.1.1s.pet (36 mb)
scim Chinese input platform: scim_1.4.14-en-zh-bionic-20.1.1s.pet (13 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-20.1.1s.pet (9 mb)

Plus 2 Chinese language pets each for Vanilla Dpup 9.2.4 (both x86_64 and x86):
x86_64:
Simplified Chinese: vanilladpup64-9.2.4-zhcn-21.1.2s.pet (3 mb)
Traditional Chinese: vanilladpup64-9.2.4-zhhk-21.1.2s.pet (3 mb)

x86:
Simplified Chinese: vanilladpup-9.2.4-zhcn-20.1.1s.pet (3 mb)
Traditional Chinese: vanilladpup-9.2.4-zhhk-20.1.1s.pet (2 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in x86_64 Vanilla Dpup 9.2.4（use 21.1.2s pets）and x86 Vanilla Dpup 9.2.4 (use 20.1.1s pets）

(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for x86_64 Vanilla Dpup 9.2.4 (both x86 and x86_64). Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

For more information about the fcitx, ibus, scim and yong half-Chinese language pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

peebee released JammyPup32 22.04+5 on Aug 5, 2022

more information and discussions: https://forum.puppylinux.com/viewtopic.php?t=5799

download JammyPup-22.04+5.iso (321 mb): https://sourceforge.net/projects/zestyp ... o/download

I have created 4 half-Chinese language pets each for jammypup32 22.04.05:
fcitx Chinese input platform: fcitx_4.2.７-en-zh-bionic-14.3.8.pet (17 mb)
ibus Chinese input platform: ibus_1.5.17-en-zh-bionic-14.3.8.pet (34 mb)
scim Chinese input platform: scim_1.4.14-en-zh-bionic-14.3.8.pet (14 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-14.3.8.pet (9 mb)

Plus 2 Chinese language pets each for jammypup32 22.04.05:
Simplified Chinese: jammypup-22.04.05-zhcn-14.3.8.pet (4 mb)
Traditional Chinese: jammypup-22.04.05-zhhk-14.3.8.pet (4 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in jammypup32 22.04.05

(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for jammypup32 22.04.05. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

For more information about the fcitx, ibus, scim and yong half-Chinese language pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

peebee released scpup64 and scpup version 22.02.04 on Aug 6, 2022

more information and discussions:
scpup64: https://forum.puppylinux.com/viewtopic.php?t=169
scpup: https://forum.puppylinux.com/viewtopic. ... 8&start=30
all: https://forum.puppylinux.com/viewforum.php?f=122

download 64 bit scpup 22.02.04： http://distro.ibiblio.org/puppylinux/pu ... -22.02.htm

download 32 bit scpup 22.02.04: http://distro.ibiblio.org/puppylinux/pu ... -22.02.htm

I have created 4 half-Chinese language pets each for x86_64 scpup 22.02.04; and x86 scpup 22.02.04:
x86_64:
fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-21.1.6.pet (18 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.1.6.pet (34 mb)
scim Chinese input platform: scim64_1.4.14-en-zh-bionic-21.1.6.pet (16 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-21.1.6.pet (8 mb)

x86:
fcitx Chinese input platform: fcitx_4.2.７-en-zh-bionic-14.3.6a.pet (15 mb)
ibus Chinese input platform: ibus_1.5.17-en-zh-bionic-14.3.6a.pet (34 mb)
scim Chinese input platform: scim_1.4.14-en-zh-bionic-14.3.6a.pet (14 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-14.3.6a.pet (8 mb)

Plus 2 Chinese language pets each for x86_64 scpup 22.02.04 and x86 scpup 22.02.04:
x86_64:
Simplified Chinese: scpup64-22.02.04T-zhcn-21.1.6.pet (3 mb)
Traditional Chinese: scpup64-22.02.04T-zhhk-21.1.6.pet (3 mb)

x86:
Simplified Chinese: scpup-22.02.04T-zhcn-14.3.6a.pet (3 mb)
Traditional Chinese: scpup-22.02.04T-zhhk-14.3.6a.pet (3 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in x86_64 scpup 22.02.04（use 21.1.6 pets）and x86 scpup 22.02.04（use 14.3.6a pets）

(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for x86_64 scpup 22.02.04; and x86 scpup 22.02.04. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

For more information about the fcitx, ibus, scim and yong half-Chinese language pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

peebee released VoidPup32 22.02+7 and VoidPup64 22.02+7 on Jul 24, 2022

more information: https://forum.puppylinux.com/viewtopic.php?t=5270

download iso:
VoidPup64 22.02+7 iso: https://sourceforge.net/projects/vpup/files/VoidPup64
VoidPup32 22.02+7 iso: https://sourceforge.net/projects/vpup/files/VoidPup32/

I have created 3 half-Chinese language pets for voidpup64 22.02+7 and 4 half-Chinese language pets for voidpup32 22.02+7:

voidpup64:
fcitx Chinese input platform: fcitx64_4.2.７-en-zh-bionic-21.0.3f.pet (12 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-21.0.3f.pet (12 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-21.0.3f.pet (8 mb)

voidpup32:
fcitx Chinese input platform: fcitx_4.2.9-en-zh-bionic-20.2.8.pet (24 mb)
ibus Chinese input platform: ibus_1.5.17-en-zh-bionic-20.2.8.pet (38 mb)
scim Chinese input platform: scim_1.4.18-en-zh-bionic-20.2.8.pet (17 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-20.2.8.pet (10 mb)

Plus 2 Chinese language pets each for voidpup64 22.02+7 and voidpup32 22.02+7:
voidpup64:
Simplified Chinese: void64-22.02.07-zhcn-21.0.3f.pet (4 mb)
Traditional Chinese: void64-22.02.07-zhhk-21.0.3f.pet (3 mb)

voidpup32:
Simplified Chinese: void-22.02.07-zhcn-20.2.8.pet (3 mb)
Traditional Chinese: void-22.02.07-zhhk-20.2.8.pet (3 mb)

To use:
(a) any 1 of the half-Chinese language pets will enable you to display and input Chinese in voidpup64 22.02+7 (please use the 21.0.3f pets) and voidpup32 22.02_7 (please use the 20.2.8 pets)

(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for voidpup64 22.02+7 and voidpup32 22.02+7. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

For more information about the fcitx, ibus, scim and yong half-Chinese language pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

dimkr released 64 bit vanillaupup 22.04.55 on Jul 2, 2022 and 22.04.61 on Jul 23, 2022

more information and discussions: https://forum.puppylinux.com/viewtopic.php?t=5290

download isoes:
22.05.61: https://github.com/dimkr/woof-CE/releas ... p-22.04.61
22.04.55 https://github.com/dimkr/woof-CE/releas ... p-22.04.55

I have created 4 half-Chinese language pets for vanillaupup 22.04.55 and 61:
fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-21.5.0.pet (15 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.5.0.pet (36 mb)
scim Chinese input platform: scim64_1.4.9-en-zh-bionic-21.5.0.pet (13 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-21.5.0.pet (9 mb)

Plus 2 Chinese language pets each for vanillaupup 22.03.55 and 61:

Simplified Chinese:
vanillaupup64-22.04.61-zhcn-21.5.0.pet (4 mb)
vanillaupup64-22.04.55-zhcn-21.5.0.pet (4 mb)

Traditional Chinese:
vanillaupup64-22.04.61-zhhk-21.5.0.pet (3 mb)
vanillaupup64-22.04.55-zhhk-21.5.0.pet (3 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in vanillaupup 22.04.55 to 61

(b) the 2 name+version number corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for vanillaupup 22.04.55 to 61. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

More information about the fcitx, ibus, scim and yong pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

on 2022-07-28, fredx181 released an update bookworm build script with kernel 5.18 and more firmware, an updated test iso is also released shortly after, exton released 2 modified iso on 20220803 and 20220807

for more information and discussions: https://forum.puppylinux.com/viewtopic.php?t=5069

download isoes:
DebLive_bookworm-tint2-2022-07-28-amd64-UEFI.iso: https://github.com/DebianDog/MakeLive/r ... 4-UEFI.iso
puppex-bookworm64-uefi-tint2-vbox-623mb-220807.iso: https://sourceforge.net/projects/puppex/files/

I have created 4 Half-Chinese deb each for debiandog bookworm (20220728) tint2 desktop and the puppex variations 220803 and 220807 :
fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-121.6.2a.deb (18 mb)
ibus Chinese input platform: ibus64_1.5.25-en-zh-bionic-121.6.2a.deb (37 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-121.6.2a.deb (9 mb)
yong Chinese input platform: yong64_1.5.25-en-zh-bionic-121.6.2a.deb (9 mb)

Plus 2 Chinese language debs each for debiandog bookworm (20220728) tint2 desktop and the puppex variations 220803 and 220807:
Simplified Chinese:
DL64_bookworm_20220728-zhcn-121.6.2a.deb (3 mb)
puppex_bookworm_tint2_20220803-zhcn-121.6.2a.deb (3 mb)
puppex_bookworm_tint2_20220807-zhcn-121.6.2a.deb (3 mb)

Traditional Chinese:
DL64_bookworm_20220728-zhhk-121.6.2a.deb (2 mb)
puppex_bookworm_tint2_20220803-zhhk-121.6.2a.deb (3 mb)
puppex_bookworm_tint2_20220807-zhhk-121.6.2a.deb (3 mb)

To use:

(a) the half-Chinese language deb will enable you to display and input Chinese in debiandog bookworm (20220728) tint2 desktop and the puppex variations 220803 and 220807

(b) the name+version corresponding Chinese language pets will give you Simplified Chinese (zhcn deb) or Traditional Chinese (zhhk deb) menus, icon labels, tooltips for debiandog bookworm (20220728) tint2 desktop and the puppex variations 220803 and 220807. Please note that all Chinese language debs rely on a suitable half-Chinese language deb already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

for more information about the fcitx, ibus, scim and yong debs, please see the first posting of this subject （same as for fcitx pets）

Download addresses for these half-Chinese and Chinese language debs are also available in the first posting of this subject.

BarryK has released EasyOS Dunfell-series 64 bit 4.3.4 on Aug 15, 2022 and 32 bit 4.3.5 on Aug 25, 2022

more information and annoucement notes:
64 bit 4.3.4: viewtopic.php?t=6584
32 bit 4.3.5: viewtopic.php?t=6652

download addresses:
64 bit 4.3.4: https://distro.ibiblio.org/easyos/amd64 ... 022/4.3.4/
32 bit 4.3.5: https://distro.ibiblio.org/easyos/x86/r ... 022/4.3.5/

I have created these half-Chinese language pets for easydunfell 4.3.4 (64 bit) and 4.3.5 (32 bit):
64 bit:
fcitx Chinese input platform: fcitx64_4.2.7-en-zh-bionic-21.2.7.pet (14 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.2.7.pet (35 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-21.2.7.pet (10 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-21.2.7.pet (9 mb)

32 bit:
fcitx Chinese input platform: fcitx_4.2.9-en-zh-bionic-20.1.3.pet (34 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-20.1.3.pet (25 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-20.1.3.pet (13 mb)

Please note that 64 bit ibus Chinese input platform cannot input Chinese in Libreoffice 7 and seamonkey browser that comes with easyos dunfell 4.1.0 to 4.2.7. If you want to run a browser with 64 bit ibus, please try light and palemoon (28.4.0).

Plus 2 Chinese language pets each for easydunfell 4.3.4 (64 bit) and 4.3.5 (32 bit):
Simplified Chinese:
64 bit: easydunfell-4.3.4-zhcn-21.2.7.pet (4 mb)
32 bit: easydunfell32-4.3.5-zhcn-20.1.3.pet (4 mb)

Traditional Chinese:
64 bit: easydunfell-4.3.4-zhhk-21.2.7.pet (3 mb)
32 bit: easydunfell32-4.3.5-zhhk-20.1.3.pet (3 mb)

To use:
(a) any 1 of the half-Chinese language pets will enable you to display and input Chinese in easydunfell 4.3.4 (64 bit use the 21.2.7 pets) and 4.3.5 (32 bit use the 20.1.3 pets)

(b) the 2 name+version number corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for easydunfell 4.3.4 (64 bit) and 4.3.5 (32 bit). Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

more information about the fcitx, ibus, scim and yong pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

peebee released VoidPup32 22.02+9 and VoidPup64 22.02+9 on Aug 28, 2022

more information: viewtopic.php?t=5270

download iso:
VoidPup64 22.02+9 iso: https://sourceforge.net/projects/vpup/files/VoidPup64
VoidPup32 22.02+9 iso: https://sourceforge.net/projects/vpup/files/VoidPup32/

I have created 3 half-Chinese language pets for voidpup64 22.02+9 and 4 half-Chinese language pets for voidpup32 22.02+9:

voidpup64:
fcitx Chinese input platform: fcitx64_4.2.７-en-zh-bionic-21.0.3f.pet (12 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-21.0.3f.pet (12 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-21.0.3f.pet (8 mb)

voidpup32:
fcitx Chinese input platform: fcitx_4.2.9-en-zh-bionic-20.2.8.pet (24 mb)
ibus Chinese input platform: ibus_1.5.17-en-zh-bionic-20.2.8.pet (38 mb)
scim Chinese input platform: scim_1.4.18-en-zh-bionic-20.2.8.pet (17 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-20.2.8.pet (10 mb)

Plus 2 Chinese language pets each for voidpup64 22.02+9 and voidpup32 22.02+9:
voidpup64:
Simplified Chinese: void64-22.02.09-zhcn-21.0.3f.pet (4 mb)
Traditional Chinese: void64-22.02.09-zhhk-21.0.3f.pet (3 mb)

voidpup32:
Simplified Chinese: void-22.02.09-zhcn-20.2.8.pet (3 mb)
Traditional Chinese: void-22.02.09-zhhk-20.2.8.pet (3 mb)

To use:
(a) any 1 of the half-Chinese language pets will enable you to display and input Chinese in voidpup64 22.02+9 (please use the 21.0.3f pets) and voidpup32 22.02+9 (please use the 20.2.8 pets)

(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for voidpup64 22.02+9 and voidpup32 22.02+9. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

For more information about the fcitx, ibus, scim and yong half-Chinese language pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

peebee released JammyPup32 22.04+6 and LxPupJammy32 22.04+6 on Sep 16, 2022

more information and discussions: viewtopic.php?t=5799

download iso:
JammyPup-22.04+5.iso (321 mb): https://sourceforge.net/projects/zestyp ... o/download
LxPupJammy32 22.04+6: (358 mb) https://sourceforge.net/projects/lxpup/ ... xPup22.09/

I have created 6 half-Chinese language pets each for jammypup32 22.04.06 and LxPupJammy32 22.04.06:
fcitx Chinese input platform: fcitx_4.2.７-en-zh-bionic-14.3.8.pet (17 mb)
gcin Chinese input platform: ibus_1.5.17-en-zh-bionic-14.3.8.pet (12 mb)
hime Chinese input platform: ibus_1.5.17-en-zh-bionic-14.3.8.pet (12 mb)
ibus Chinese input platform: ibus_1.5.17-en-zh-bionic-14.3.8.pet (34 mb)
scim Chinese input platform: scim_1.4.14-en-zh-bionic-14.3.8.pet (14 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-14.3.8.pet (9 mb)

Plus 2 Chinese language pets each for jammypup32 22.04.06 and LxPupJammy32 22.04.06:
Simplified Chinese:
jammypup-22.04.06-zhcn-14.3.8.pet (4 mb)
lxpupjammy-22.04.06-zhcn-14.3.8.pet (4 mb)

Traditional Chinese:
jammypup-22.04.06-zhhk-14.3.8.pet (4 mb)
lxpupjammy-22.04.06-zhhk-14.3.8.pet (4 mb)

To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in jammypup32 22.04.06 and LxPupJammy32 22.04.06

(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for jammypup32 22.04.06 and LxPupJammy32 22.04.06. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

For more information about the fcitx, gcin, hime, ibus, scim and yong half-Chinese language pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

on 2022 Aug 25, fredx181 released Devuan Live with Trinity Desktop 32 bit and 64 bit iso:
Devuan_live-Trinity-32-bit.iso
Devuan_live-Trinity-64-bit.iso

for more information and discussions:
viewtopic.php?t=6655
https://github.com/DebianDog/MakeLive/releases/tag/1.4

download isoes:
Devuan_live-Trinity-32-bit.iso: https://github.com/DebianDog/MakeLive/r ... 32-bit.iso
Devuan_live-Trinity-64-bit.iso: https://github.com/DebianDog/MakeLive/r ... 64-bit.iso

I have created these Half-Chinese deb each for Devuan Live with Trinity Desktop 32 bit and 64 bit :
64 bit:
fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-121.5.2.deb (18 mb)
gcin Chinese input platform: gcin64_2.9.0-en-zh-bionic-121.5.2.deb (12 mb)
ibus Chinese input platform: ibus64_1.5.25-en-zh-bionic-121.5.2.deb (37 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-121.5.2.deb (9 mb)
yong Chinese input platform: yong64_2.5.0-en-zh-bionic-121.5.2.deb (9 mb)

32 bit:
fcitx Chinese input platform: fcitx32_4.2.9-en-zh-bionic-120.5.3.deb (18 mb)
ibus Chinese input platform: ibus32_1.5.23-en-zh-bionic-120.5.3.deb (35 mb)
scim Chinese input platform: scim32_1.4.18-en-zh-bionic-120.5.3.deb (9 mb)
yong Chinese input platform: yong32_2.5.0-en-zh-bionic-120.5.3.deb (8 mb)

Plus 2 Chinese language debs each for Devuan Live with Trinity Desktop 32 bit and 64 bit:
Simplified Chinese:
DL64_devuan_trinity_20220901-zhcn-121.5.2.deb (3 mb)
DL32_devuan_trinity_20220901-zhcn-120.5.3.deb (3 mb)

Traditional Chinese:
DL64_devuan_trinity_20220901-zhhk-121.5.2.deb (2 mb)
DL32_devuan_trinity_20220901-zhhk-120.5.3.deb (2 mb)

To use:
(a) the half-Chinese language deb will enable you to display and input Chinese in Devuan Live with Trinity Desktop (64 bit uses 121.5.2, 32 bit uses 120.5.3)

(b) the name+version corresponding Chinese language pets will give you Simplified Chinese (zhcn deb) or Traditional Chinese (zhhk deb) menus, icon labels, tooltips for Devuan Live with Trinity Desktop 32 bit and 64 bit. Please note that all Chinese language debs rely on a suitable half-Chinese language deb already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

for more information about the fcitx, ibus, scim and yong debs, please see the first posting of this subject （same as for fcitx pets）

Download addresses for these half-Chinese and Chinese language debs are also available in the first posting of this subject.

on 2022 Sep 8, fredx181 released Bookworm Bullseye ISO with kernel 5.18 64 bit iso:
DebLive_Bullseye-k-5.18_amd64.iso

for more information and discussions: viewtopic.php?t=1857

download iso: https://github.com/DebianDog/MakeLive/r ... _amd64.iso

I have created these Half-Chinese deb for Bookworm Bullseye ISO with kernel 5.18 64 bit :
fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-121.5.2.deb (18 mb)
gcin Chinese input platform: gcin64_2.9.0-en-zh-bionic-121.5.2.deb (12 mb)
ibus Chinese input platform: ibus64_1.5.25-en-zh-bionic-121.5.2.deb (37 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-121.5.2.deb (9 mb)
yong Chinese input platform: yong64_2.5.0-en-zh-bionic-121.5.2.deb (9 mb)

Plus 2 Chinese language debs each for Bookworm Bullseye ISO with kernel 5.18 64 bit:
Simplified Chinese: DL64_Bullseye_k518-zhcn-121.5.2.deb (3 mb)

Traditional Chinese: DL64_Bullseye_k518-zhhk-121.5.2.deb (2 mb)

To use:
(a) the half-Chinese language deb will enable you to display and input Chinese in Bookworm Bullseye ISO with kernel 5.18 64 bit

(b) the name+version corresponding Chinese language pets will give you Simplified Chinese (zhcn deb) or Traditional Chinese (zhhk deb) menus, icon labels, tooltips for Bookworm Bullseye ISO with kernel 5.18 64 bit. Please note that all Chinese language debs rely on a suitable half-Chinese language deb already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

for more information about the fcitx, ibus, scim and yong debs, please see the first posting of this subject （same as for fcitx pets）

Download addresses for these half-Chinese and Chinese language debs are also available in the first posting of this subject.

BarryK has released EasyOS Dunfell-series 64 bit 4.4.0 on Aug 25, 2022, 4.4.1 on Oct 7, 2022

more information and annoucement notes:
4.4.0: https://bkhome.org/news/202209/easyos-v ... eased.html
4.4.1: https://bkhome.org/news/202210/easyos-441-released.html

download addresses:
4.4.0: https://distro.ibiblio.org/easyos/amd64 ... /2022/4.4/
4.4.1: https://distro.ibiblio.org/easyos/amd64 ... 022/4.4.1/

I have created these icake Chinese language pets for easydunfell 4.4.0 and 4.4.1:

(A) 6 half-Chinese pets:
fcitx Chinese input platform: fcitx64_4.2.7-en-zh-bionic-21.2.7.pet (14 mb)
gcin Chinese input platform: gcin64_2.9.0-en-zh-bionic-21.2.7.pet (9 mb)
hime Chinese input platform: hime64_0.9.11-en-zh-bionic-21.2.7.pet (6 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.2.7.pet (35 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-21.2.7.pet (10 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-21.2.7.pet (9 mb)

Please note that 64 bit ibus Chinese input platform cannot input Chinese in Libreoffice 7 and seamonkey browser that comes with easyos dunfell 4.4.0 and 4.4.1. If you want to run a browser with 64 bit ibus, please try light and palemoon (28.4.0).

(B) 2 Chinese language pets each for easydunfell 4.4.0 and 4.4.1:
Simplified Chinese:
easydunfell-4.4.0-zhcn-21.2.7.pet (4 mb)
easydunfell-4.4.1-zhcn-21.2.7.pet (4 mb)

Traditional Chinese:
easydunfell-4.4.0-zhhk-21.2.7.pet (3 mb)
easydunfell-4.4.1-zhhk-21.2.7.pet (3 mb)

(C) 1 icake combo Chinese language pet for easydunfell 4.4.1: icake64-easydunfell-4.4.1-combo-est-fghisy-21.2.7.pet（206 mb）

After installing this icake combo Chinese language pet, user can select:

a. 1 user interface language from: English, Simplified Chinese and Traditional Chinese

b. 1 Chinese input method platform (number of Chinese input methods included) from:
1. fcitx (33)
2. gcin (15)
3. hime (10)
4. ibus (25)
5. scim (23)
6. yong (25)

so the total number of different live systems that can be setup from this icake Chinese combo iso is 18:
18 = 3 [user interface languages] X 6 [Chinese input method platforms]

To use:
(a) any 1 of the half-Chinese language pets will enable you to display and input Chinese in easydunfell 4.4.0 and 4.4.1

(b) the 2 name+version number corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for easydunfell 4.4.0 and 4.4.1. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

more information about the fcitx, gcin, hime, ibus, scim and yong pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.