icake Chinese language pets

[icake]

ticoo1 posted a message here about Busterpup-8.0.0-Firefox-K-4.19.20-Pae-eng.iso on Apirl 29, 2021:
https://skamilinux.hu/phpBB3/viewtopic. ... 1&start=81

download Busterpup-8.0.0-Firefox-K-4.19.20-Pae-eng.iso: https://sourceforge.net/projects/puppys ... o/download

I have created 4 half-Chinese language pets for Busterpup 8.0.0 k4.19.20:
fcitx Chinese input platform: fcitx_4.2.7-en-zh-bionic-20.0.0.pet (17 mb)
ibus Chinese input platform: ibus_1.5.17-en-zh-bionic-20.0.0.pet (29 mb)
scim Chinese input platform: scim_1.4.14-en-zh-bionic-20.0.0.pet (16 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-20.0.0.pet (8 mb)

Plus 2 Chinese language pets each for Busterpup 8.0.0 k4.19.20:
Simplified Chinese: busterpup-8.0.0k41920-zhcn-20.0.0.pet (3 mb)
Traditional Chinese: busterpup-8.0.0k41920-zhhk-20.0.0.pet (3 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in Busterpup 8.0.0 k4.19.20

(b) the 2 name+version number corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk)

menus, icon labels, tooltips for Busterpup 8.0.0 k4.19.20. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

for more information about the fcitx, ibus, scim and yong3264 pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

[icake]

BarryK has released EasyOS Dunfell-series 3.3.0 on Feb 2, 2022, 3.4.0 on Feb 13, 2022 and 3.4.1 on Feb 22, 2022

more information and annoucement notes:
3.4.1: viewtopic.php?t=5255
3.4.0: viewtopic.php?t=5176
3.3.0: viewtopic.php?t=5103

download addresses:
3.4.1: https://distro.ibiblio.org/easyos/amd64 ... ell/3.4.1/
3.4.0: https://distro.ibiblio.org/easyos/amd64 ... nfell/3.4/
3.3.0: https://distro.ibiblio.org/easyos/amd64 ... nfell/3.3/

I have created these half-Chinese language pets for easydunfell 3.3.0, 3.4 and 3.4.1:
3.4.1. and 3.4.0:
fcitx Chinese input platform: fcitx64_4.2.7-en-zh-bionic-21.2.6.pet (14 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.2.6.pet (31 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-21.2.6.pet (9 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-21.2.6.pet (8 mb)

3.3.0:
fcitx Chinese input platform: fcitx64_4.2.7-en-zh-raring-14.0.8.pet (12 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-raring-14.0.8.pet (31 mb)
scim Chinese input platform: scim64_1.4.14-en-zh-raring-14.0.8.pet (12 mb)
yong Chinese input platform: yong3264_20201122-en-zh-raring-14.0.8.pet (8 mb)

Please note that ibus Chinese input platform cannot input Chinese in Libreoffice 7 and seamonkey browser that comes with easyos dunfell 3.3.0 to 3.4.1. If you want to run a browser with ibus, please try light and palemoon (28.4.0).

Plus 2 Chinese language pets each for easydunfell 3.3.0 to 3.4.1:

Simplified Chinese:
easydunfell-3.4.1-zhcn-21.2.6.pet (6 mb)
easydunfell-3.4.0-zhcn-21.2.6.pet (6 mb)
easydunfell-3.3.0-zhcn-14.0.8.pet (3 mb)

Traditional Chinese:
easydunfell-3.4.1-zhhk-21.2.6.pet (5 mb)
easydunfell-3.4.0-zhhk-21.2.6.pet (5 mb)
easydunfell-3.3.0-zhhk-14.0.8.pet (3 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in easydunfell 3.3.0 (use the 14.0.8 pets) ; 3.4 and 3.4.1 (use the 21.2.6.pets)

(b) the 2 name+version number corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for easydunfell 3.3.0 to 3.4.1. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

more information about the fcitx, ibus, scim and yong pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

[icake]

peebee released BionicPup32-8.0+29.iso on Dec 24, 2021

more information and discussions: viewtopic.php?t=165

download bionicpup32-8.0+29-uefi.iso: http://distro.ibiblio.org/puppylinux/pu ... cpup32.htm

I have created 4 half-Chinese language pets for BionicPup32 8.0.29:
fcitx Chinese input platform: fcitx_4.2.9-en-zh-bionic-20.0.1.pet (17 mb)
ibus Chinese input platform: ibus_1.5.17-en-zh-bionic-20.0.1.pet (29 mb)
scim Chinese input platform: scim_1.4.14-en-zh-bionic-20.0.1.pet (16 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-20.0.1.pet (8 mb)

Plus 2 Chinese language pets for BionicPup32 8.0.29:
Simplified Chinese: bionicpup32-8.0.29-zhcn-20.0.1.pet (4 mb)
Traditional Chinese: bionicpup32-8.0.29-zhhk-20.0.1.pet (4 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in BionicPup32 8.0.29

(b) the Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for BionicPup32 8.0.29. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

for more information about the fcitx, ibus, scim and yong half-Chinese pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

[icake]

peebee released UPupFF+D-20.12+11.iso on Dec 3, 2021

more information and discussions: http://distro.ibiblio.org/puppylinux/pu ... pupff%2Bd/

download UPupFF+D-20.12+11.iso: https://sourceforge.net/projects/zestyp ... -Focal%2B/

I have created 4 half-Chinese language pets for UPupFF+D-20.12+11:

fcitx Chinese input platform: fcitx_4.2.9-en-zh-bionic-20.0.0s.pet (16 mb)
ibus Chinese input platform: ibus_1.5.17-en-zh-bionic-20.0.0s.pet (28 mb)
scim Chinese input platform: scim_1.4.14-en-zh-bionic-20.0.0s.pet (20 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-20.0.0s.pet (8 mb)

Plus 2 Chinese language pets for UPupFF+D-20.12+11:
Simplified Chinese: upupffD-20.12.11-zhcn-20.0.0s.pet (2 mb)
Traditional Chinese: upupffD-20.12.11-zhhk-20.0.0s.pet (2 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in UPupFF+D-20.12+11

(b) the name+version number corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for UPupFF+D-20.12+11. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

for more information about the fcitx, ibus, scim and yong pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

[icake]

exton released PuppEX Focal64 live DVD BUILD 220201 on Feb 02, 2022

more information and discussions:
viewtopic.php?t=5111
https://puppex.exton.net

download puppex-focal64-uefi-932mb-220201-final.iso： https://sourceforge.net/projects/puppex/files/

I have created 4 half-Chinese language pets for PuppEx Focal64 220221 :
fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-23.0.0s.pet (18 mb)
ibus Chinese input platform: ibus64_1.5.23-en-zh-bionic-23.0.0s.pet (28 mb)
scim Chinese input platform: scim64_1.4.9-en-zh-bionic-23.0.0s.pet (13 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-23.0.0s.pet (8 mb)

Plus 2 Chinese language pets for PuppEx Focal64 220201 :
Simplified Chinese: pupexfocal64-22.02.01-zhcn-23.0.0s.pet (4 mb)
Traditional Chinese: pupexfocal64-22.02.01-zhhk-23.0.0s.pet (3 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in PuppEx Focal64 220201

(b) the 2 name+version number corresponding Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for PuppEx Focal64 220201. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

for more information about the fcitx, ibus, scim and yong pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

[icake]

dimkr recently released Vanilla Dpup (x86 and x86_64) 9.0.27 (early Feb, 2022); 9.0.30 (Feb 12, 2022); x86_64 9.1.9 (Feb 12, 2022)

More information: viewtopic.php?t=4093

Download iso: https://github.com/vanilla-dpup/releases/releases

I have created 4 half-Chinese language pets each for x86_64 Vanilla Dpup 9.0.27 to 9.1.9; and x86 Vanilla Dpup 9.0.27 to 9.0.30:
x86_64:
fcitx Chinese input platform: fcitx64_4.2.7-en-zh-bionic-21.1.2a.pet (15 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.1.2a.pet (33 mb)
scim Chinese input platform: scim64_1.4.14-en-zh-bionic-21.1.2a.pet (12 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-21.1.2a.pet (8 mb)

x86:
fcitx Chinese input platform: fcitx_4.2.７-en-zh-bionic-20.1.1.pet (19 mb)
ibus Chinese input platform: ibus_1.5.17-en-zh-bionic-20.1.1.pet (34 mb)
scim Chinese input platform: scim_1.4.14-en-zh-bionic-20.1.1.pet (13 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-20.1.1.pet (8 mb)

Plus 2 Chinese language pets each for x86_64 Vanilla Dpup 9.0.27 to 9.1.9; and x86 Vanilla Dpup 9.0.27 to 9.0.30:
x86_64:
Simplified Chinese:
vanilladpup64-9.1.9-zhcn-21.1.2a.pet (3 mb)
vanilladpup64-9.0.30-zhcn-21.1.2a.pet (3 mb)
vanilladpup64-9.0.27-zhcn-21.1.2a.pet (3 mb)

Traditional Chinese:
vanilladpup64-9.1.9-zhhk-21.1.2a.pet (3 mb)
vanilladpup64-9.0.30-zhhk-21.1.2a.pet (3 mb)
vanilladpup64-9.0.27-zhhk-21.1.2a.pet (3 mb)

x86:
Simplified Chinese:
vanilladpup-9.0.30-zhcn-20.1.1.pet (3 mb)
vanilladpup-9.0.27-zhcn-201.1.pet (3 mb)

Traditional Chinese:
vanilladpup-9.0.30-zhhk-20.1.1.pet (2 mb)
vanilladpup-9.0.27-zhhk-20.1.1.pet (2 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in x86_64 Vanilla Dpup 9.0.27 to 9.1.9（use 21.1.2a pets）and x86 Vanilla Dpup 9.0.27 to 30（use 20.1.1 pets）

(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for x86_64 Vanilla Dpup 9.0.27 to 9.1.9 and x86 Vanilla Dpup 9.0.27 to 30. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

For more information about the fcitx, ibus, scim and yong half-Chinese language pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

[icake]

peebee released ImpishPup32 21.10RC4 on Oct 12,2021

more information and discussions: viewtopic.php?t=472&start=69

download ImpishPup32-21.10-RC0.iso and ImpishPup32-21.10-RC0.iso_ImpishPup32-21.10-RC4.iso.delta: https://sourceforge.net/projects/zestyp ... ish%2B/RC/

I have created 4 half-Chinese language pets for ImpishPup3221.10r4:
fcitx Chinese input platform: fcitx_4.2.9-en-zh-bionic-20.0.0a.pet (19 mb)
ibus Chinese input platform: ibus_1.5.17-en-zh-bionic-20.0.0a.pet (29 mb)
scim Chinese input platform: scim_1.4.18-en-zh-bionic-20.0.0a.pet (13 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-20.0.0a.pet (8 mb)

Plus 2 Chinese language pets for ImpishPup3221.10r4:
Simplified Chinese: impishpup32-21.10rc4-zhcn-20.0.0a.pet (2 mb)
Traditional Chinese: impishpup32-21.10rc4-zhhk-20.0.0a.pet (2 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in impishpup32-21.10rc4

(b) the name+version number corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for impishpup32-21.10rc4. Please note that all Chinese language debs rely on a suitable half-Chinese language deb already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

for more information about the fcitx, ibus, scim and yong pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

[icake]

josejp2424 first released Devanpup 32 and 64 (woof-ce) on May 30, 2021 and these were finalialized at the end of 2021.

more information: viewtopic.php?t=3083

download isoes:
64 bit:
devuanpup64_Lxde-1-9.7.0.iso (542 mb) (released 2021-12-26)
devuanpup64_JWM-1-9.7.0.iso (541 mb) (released 2021-11-24)
https://sourceforge.net/projects/devuan ... imaera/64/

32 bit:
devuanpup-9.7.0-chimaera_4.0_i386.iso (503 mb) (released 2021-12-06)
devuanpup-9.7.0-chimaera_4.0_beta-3_i386.iso (502 mb) (released 2021-12-29)
https://sourceforge.net/projects/devuan ... imaera/32/

I have created 4 half-Chinese language pets for amd64 devuanpup64-Lxde and JWM and i386 devuanpup chimaera 4.0 and 4.0 beta3:

64 bit:
fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-21.0.0f.pet (13 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.0.0f.pet (28 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-21.0.0f.pet (12 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-21.0.0f.pet (8 mb)

32 bit:
fcitx Chinese input platform: fcitx_4.2.7-en-zh-bionic-20.2.0i.pet (19 mb)
ibus Chinese input platform: ibus_1.5.17_en-zh-bionic-20.2.0i.pet (38 mb)
scim Chinese input platform: scim_1.4.14-en-zh-bionic-20.2.0i.pet (13 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-20.2.0i.pet (8 mb)

Plus 2 Chinese language pets each for amd64 devuanpup64-Lxde and JWM and i386 devuanpup chimaera 4.0 and 4.0 beta3:

64 bit:
Simplified Chinese:
devuanpup64-Lxde-1-9.7.0.20211226-zhcn-21.0.0f.pet (4 mb)
devuanpup64-JWM-1-9.7.0.20211124-zhcn-21.0.0f.pet (4 mb)

Traditional Chinese:
devuanpup64-Lxde-1-9.7.0.20211226-zhhk-21.0.0f.pet (3 mb)
devuanpup64-JWM-1-9.7.0.20211124-zhhk-21.0.0f.pet (3 mb)

32 bit:
Simplified Chinese:
devuanpup-9.7.0-chimaera_4.0.20211206-zhcn-20.2.0i.pet (3 mb)
devuanpup-9.7.0-chimaera_4.0beta3.20211229-zhcn-20.2.0i.pet (3 mb)

Traditional Chinese:
devuanpup-9.7.0-chimaera_4.0.20211206-zhhk-20.2.0i.pet (3 mb)
devuanpup-9.7.0-chimaera_4.0beta3.20211229-zhhk-20.2.0i.pet (3 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in amd64 devuanpup64-Lxde and JWM (please use the 21.0.0f pets) and i386 devuanpup chimaera 4.0 and 4.0 beta3 (please use the 20.2.0i pets)

(b) the name+version number corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for amd64 devuanpup64-Lxde and JWM and i386 devuanpup chimaera 4.0 and 4.0 beta3 systems. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

for more information about the fcitx, ibus, scim and yong half-Chinese pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

[icake]

wizard released Friendly-Bionic32 rc1 and rc2 on Feb 14, 2022

more information and discussions: viewtopic.php?t=5188

download iso:
friendly-bionic32-rc2.iso: https://sourceforge.net/projects/friend ... o/download
friendly-bionic32-rc1.iso: https://sourceforge.net/projects/friend ... o/download

I have created 4 half-Chinese language pets for friendly bionic2 rc1 and rc2:
fcitx Chinese input platform: fcitx_4.2.7-en-zh-bionic-20.0.1f.pet (16 mb)
ibus Chinese input platform: ibus_1.5.17-en-zh-bionic-20.0.1f.pet (28 mb)
scim Chinese input platform: scim_1.4.18-en-zh-bionic-20.0.1f.pet (15 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-20.0.1f.pet (8 mb)

Plus 2 Chinese language pets each for friendly bionic2 rc1 and rc2:
Simplified Chinese:
bionicpup-8.0.29-friendly-rc2-zhcn-20.0.1f.pet (8 mb)
bionicpup-8.0.29-friendly-rc1-zhcn-20.0.1f.pet (8 mb)

Traditional Chinese:
bionicpup-8.0.29-friendly-rc2-zhhk-20.0.1f.pet (7 mb)
bionicpup-8.0.29-friendly-rc1-zhhk-20.0.1f.pet (7 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in friendly bionic2 rc1 and rc2

(b) the name+version number corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for friendly bionic2 rc1 and rc2. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

for more information about the fcitx, ibus, scim and yong half-Chinese pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

[icake]

wizard first released Friendly-fossa64 on Dec 9, 2021 and now rc1 to 3 are available

more information and discussions: viewtopic.php?t=4681

download iso:
friendly-fossa64-rc3.iso: https://sourceforge.net/projects/friend ... o/download
friendly-fossa64-rc2.iso: https://sourceforge.net/projects/friend ... o/download
friendly-fossa64-rc1.iso: https://sourceforge.net/projects/friend ... o/download

I have created 4 half-Chinese language pets for friendly fossa64 rc1 to 3:

fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-23.0.1s.pet (18 mb)
ibus Chinese input platform: ibus64_1.5.23-en-zh-bionic-23.0.1s.pet (33 mb)
scim Chinese input platform: scim64_1.4.9-en-zh-bionic-23.0.1s.pet (15 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-23.0.1s.pet (8 mb)

Plus 4 Chinese language pets each for friendly fossa64 rc1 to 3:
Simplified Chinese:
fossapup64_friendly_rc3-9.5.0-zhcn-23.0.1s.pet (4 mb)
fossapup64_friendly_rc2-9.5.0-zhcn-23.0.1s.pet (4 mb)
fossapup64_friendly_rc1-9.5.0-zhcn-23.0.1s.pet (4 mb)

Traditional Chinese:
fossapup64_friendly_rc3-9.5.0-zhhk-23.0.1s.pet (3 mb)
fossapup64_friendly_rc2-9.5.0-zhhk-23.0.1s.pet (3 mb)
fossapup64_friendly_rc1-9.5.0-zhhk-23.0.1s.pet (3 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in friendly fossa64 rc1 to 3

(b) the name+version number corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for friendly fossa64 rc1 to 3. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

for more information about the fcitx, ibus, scim and yong half-Chinese pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

[icake]

mistfire has recently released QuickPup64 22.01 beta5 (Feb 13, 2022), beta6 (Feb 15, 2022)

More information and forum discussions: viewtopic.php?t=3171

Download iso:
quickpup64_22.01-beta-6.iso: https://drive.google.com/file/d/1Rguuol ... p1H0mvcHUl
quickpup64_22.01-beta-5.iso: https://drive.google.com/file/d/1H9C6Lh ... b0PnLCQpe/

I have created 4 half-Chinese language pets for QuickPup 22.01 beta5 and 6:

fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-21.2.5.pet (14 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.2.5.pet (33 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-21.2.5.pet (16 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-21.2.5.pet (8 mb)

Plus 4 Chinese language pets each for QuickPup 22.01 beta5 and 6:
Simplified Chinese:
quickpup64-22.01beta6-zhcn-21.2.5.pet (3 mb)
quickpup64-22.01beta5-zhcn-21.2.5.pet (3 mb)

Traditional Chinese:
quickpup64-22.01beta6-zhhk-21.2.5.pet (3 mb)
quickpup64-22.01beta5-zhhk-21.2.5.pet (3 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in QuickPup 22.01 beta5 and 6

(b) the name+version number corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for QuickPup 22.01 beta5 and 6. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

for more information about the fcitx, ibus, scim and yong half-Chinese pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

[icake]

peebee released scpup64 and scpup version 22.02.00 on Feb 16, 2022

more information and discussions:
scpup64: viewtopic.php?t=169
scpup: viewtopic.php?t=168&start=30
all: viewforum.php?f=122

download 64 bit scpup 22.02.00： http://distro.ibiblio.org/puppylinux/pu ... -22.02.htm

download 32 bit scpup 22.02.00: http://distro.ibiblio.org/puppylinux/pu ... -22.02.htm

I have created 4 half-Chinese language pets each for x86_64 scpup 22.02.00; and x86 scpup 22.02.00:
x86_64:
fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-21.1.6.pet (18 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.1.6.pet (34 mb)
scim Chinese input platform: scim64_1.4.14-en-zh-bionic-21.1.6.pet (16 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-21.1.6.pet (8 mb)

x86:
fcitx Chinese input platform: fcitx_4.2.７-en-zh-bionic-14.3.6a.pet (15 mb)
ibus Chinese input platform: ibus_1.5.17-en-zh-bionic-14.3.6a.pet (34 mb)
scim Chinese input platform: scim_1.4.14-en-zh-bionic-14.3.6a.pet (14 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-14.3.6a.pet (8 mb)

Plus 2 Chinese language pets each for x86_64 scpup 22.02.00 and x86 scpup 22.02.00:
x86_64:
Simplified Chinese: scpup64-22.02.00T-zhcn-21.1.6.pet (3 mb)
Traditional Chinese: scpup64-22.02.00T-zhhk-21.1.6.pet (3 mb)

x86:
Simplified Chinese: scpup-22.02.00T-zhcn-14.3.6a.pet (3 mb)
Traditional Chinese: scpup-22.02.00T-zhhk-14.3.6a.pet (3 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in x86_64 scpup 22.02.00（use 21.1.6 pets）and x86 scpup 22.02.00（use 14.3.6a pets）

(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for x86_64 scpup 22.02.00; and x86 scpup 22.02.00. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

For more information about the fcitx, ibus, scim and yong half-Chinese language pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

[icake]

gumanzoy released bullseyedog liveusb (both 64 and 32 bit) on Sep 2, 2021

more information and discussions: https://forum.puppylinux.com/viewtopic.php?t=3903

downoad liveusb-1100mb-doglinux-debian-11.iso (1.1 Gb):
https://drive.google.com/drive/folders/ ... sp=sharing
https://github.com/DebianDog/MakeLive/r ... -11.tar.gz

I have created 3 Half-Chinese language debs each for 64 and 32 bit bullseyedog liveusb:

64 bit:
fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-121.2.6.deb (14 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-121.2.6.deb (7 mb)
yong Chinese input platform: yong64_2.5.0-en-zh-bionic-121.2.6.deb (8 mb)

32 bit:
fcitx Chinese input platform: fcitx32_4.2.9-en-zh-bionic-120.2.9.deb (22 mb)
scim Chinese input platform: scim32_1.4.18-en-zh-bionic-120.2.9.deb (14 mb)
yong Chinese input platform: yong32_2.5.0-en-zh-bionic-120.2.9.deb (12 mb)

Plus 2 Chinese language debs each for 64 and 32 bit bullseyedog liveusb:
Simplified Chinese:
64 bit: liveusb64-1100mb-doglinux-debian-11-20220214-zhcn-121.2.6.deb（4 mb）
32 bit: liveusb32-1100mb-doglinux-debian-11-20220214-zhcn-120.2.9.deb（4 mb）

Traditional Chinese:
64 bit: liveusb64-1100mb-doglinux-debian-11-20220214-zhhk-121.2.6.deb（3 mb）
32 bit: liveusb32-1100mb-doglinux-debian-11-20220214-zhhk-120.2.9.deb（3 mb）

To use:
(i) any 1 of the 3 half-Chinese language debs will enable you to display and input Chinese in 64 bit (121.2.6 debs) and 32 bit (120.2.9 debs) bullseyedog liveusb.

(ii) the name+version corresponding Chinese language pets will give you Simplified Chinese (zhcn deb) or Traditional Chinese (zhhk deb) menus, icon labels, tooltips for 64 and 32 bit bullseyedog liveusb. Please note that all Chinese language debs rely on a suitable half-Chinese language deb already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

More information about these debs can be found in a pdf user guide written in English, Traditional Chinese and Simplified Chinese.

Download addresses for all the above files (including the scipt mklive-bookworm, English live cd isoes, half-Chinese and Chinese debs and pdf user guide) can be found in the first posting of this subject.

[icake]

Grey released Jammypup 9.7a on Mar 02, 2022 and 9.7b on Mar 13, 2022

more information and discussions:
https://forum.puppylinux.com/viewtopic. ... 8&start=89
https://forum.puppylinux.com/viewtopic. ... &start=110

download isoes:
jammypup64-9.7a.iso: https://mega.nz/file/s01FySJD#2AZa1Tow- ... 2vydLmFR98
jammypup64-9.7b.iso: https://mega.nz/file/5gU1UAJZ#8xdH6RZUr ... dfrQYcA9Iw

I have created 4 half-Chinese language pets for Jammypup 9.7a and 9.7b:

fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-21.0.0b.pet (14 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.0.0b.pet (24 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-21.0.0b.pet (12 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-21.0.0b.pet (8 mb)

Plus 2 Chinese language pets each for Jammypup 9.7a and 9.7b:

Simplified Chinese:
jammypup64-9.7a-zhcn-21.0.0b.pet (4 mb)
jammypup64-9.7b-zhcn-21.0.0b.pet (4 mb)

Traditional Chinese:
jammypup64-9.7a-zhhk-21.0.0b.pet (3 mb)
jammypup64-9.7b-zhhk-21.0.0b.pet (3 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in Jammypup 9.7a and 9.7b

(b) the 2 name+version number corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for Jammypup 9.7a and 9.7b. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

more information about the fcitx, ibus, scim and yong pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

[icake]

dimkr recently released Vanilla Dpup 9.0.33 (both x86 and x86_64) on Feb 27, 2022; 9.0.36 (both x86 and x86_64) on Mar 19, 2022; 9.1.15 (x86_64 only) on Mar 19, 2022

More information:
https://forum.puppylinux.com/viewforum.php?f=183
https://forum.puppylinux.com/viewtopic.php?t=5039
https://forum.puppylinux.com/viewtopic.php?t=4093

Download iso:
https://vanilla-dpup.github.io
https://github.com/vanilla-dpup/releases/releases

I have created 4 half-Chinese language pets each for Vanilla Dpup 9.0.33 (both x86_64 and x86) ; 9.0.36 (both x86_64 and x86) and 9.1.15 (x86_64 only) :
x86_64:
fcitx Chinese input platform: fcitx64_4.2.7-en-zh-bionic-21.1.2a.pet (15 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.1.2a.pet (33 mb)
scim Chinese input platform: scim64_1.4.14-en-zh-bionic-21.1.2a.pet (12 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-21.1.2a.pet (8 mb)

x86:
fcitx Chinese input platform: fcitx_4.2.７-en-zh-bionic-20.1.1.pet (19 mb)
ibus Chinese input platform: ibus_1.5.17-en-zh-bionic-20.1.1.pet (34 mb)
scim Chinese input platform: scim_1.4.14-en-zh-bionic-20.1.1.pet (13 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-20.1.1.pet (8 mb)

Plus 2 Chinese language pets each for Vanilla Dpup 9.0.33 (both x86_64 and x86) ; 9.0.36 (both x86_64 and x86) and 9.1.15 (x86_64 only) :
x86_64:
Simplified Chinese:
vanilladpup64-9.1.15-zhcn-21.1.2a.pet (3 mb)
vanilladpup64-9.0.36-zhcn-21.1.2a.pet (3 mb)
vanilladpup64-9.0.33-zhcn-21.1.2a.pet (3 mb)

Traditional Chinese:
vanilladpup64-9.1.15-zhhk-21.1.2a.pet (3 mb)
vanilladpup64-9.0.36-zhhk-21.1.2a.pet (3 mb)
vanilladpup64-9.0.33-zhhk-21.1.2a.pet (3 mb)

x86:
Simplified Chinese:
vanilladpup-9.0.36-zhcn-20.1.1.pet (3 mb)
vanilladpup-9.0.33-zhcn-20.1.1.pet (3 mb)

Traditional Chinese:
vanilladpup-9.0.36-zhhk-20.1.1.pet (2 mb)
vanilladpup-9.0.33-zhhk-20.1.1.pet (2 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in x86_64 Vanilla Dpup 9.0.33 to 9.1.15（use 21.1.2a pets）and

x86 Vanilla Dpup 9.0.33 to 9.0.36 (use 20.1.1 pets）

(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for x86_64 Vanilla Dpup 9.0.33 to 9.1.15 and x86 Vanilla Dpup 9.0.33 to 9.0.36. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

For more information about the fcitx, ibus, scim and yong half-Chinese language pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

[icake]

mistfire has recently released QuickPup64 22.01 beta7 (Feb 23, 2022), beta8 (Mar 9, 2022)

More information and forum discussions: viewtopic.php?t=3171

Download iso:
quickpup64_22.01-beta-8.iso: https://drive.google.com/file/d/1CxF-VZ ... COVWaqa_re
quickpup64_22.01-beta-7.iso: https://drive.google.com/file/d/169ekQv ... MaZUuxRr2V

I have created 4 half-Chinese language pets for QuickPup 22.01 beta7 and 8:

fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-21.2.5.pet (14 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.2.5.pet (33 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-21.2.5.pet (16 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-21.2.5.pet (8 mb)

Plus 4 Chinese language pets each for QuickPup 22.01 beta7 and 8:
Simplified Chinese:
quickpup64-22.01beta8-zhcn-21.2.5.pet (3 mb)
quickpup64-22.01beta7-zhcn-21.2.5.pet (3 mb)

Traditional Chinese:
quickpup64-22.01beta8-zhhk-21.2.5.pet (3 mb)
quickpup64-22.01beta7-zhhk-21.2.5.pet (3 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in QuickPup 22.01 beta7 and 8

(b) the name+version number corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for QuickPup 22.01 beta7 and 8. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

for more information about the fcitx, ibus, scim and yong half-Chinese pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

[icake]

peebee released ImpishPup32 21.10RC5 on Oct 12, 2021

more information and discussions: https://forum.puppylinux.com/viewtopic. ... 2&start=69

download ImpishPup32-21.10-RC5.iso: https://sourceforge.net/projects/zestyp ... Impish%2B/

I have created 4 half-Chinese language pets for ImpishPup3221.10r5:
fcitx Chinese input platform: fcitx_4.2.9-en-zh-bionic-20.0.0a.pet (19 mb)
ibus Chinese input platform: ibus_1.5.17-en-zh-bionic-20.0.0a.pet (29 mb)
scim Chinese input platform: scim_1.4.18-en-zh-bionic-20.0.0a.pet (13 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-20.0.0a.pet (8 mb)

Plus 2 Chinese language pets each for ImpishPup3221.10r5:
Simplified Chinese: impishpup32-21.10rc5-zhcn-20.0.0a.pet (2 mb)
Traditional Chinese: impishpup32-21.10rc5-zhhk-20.0.0a.pet (2 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in impishpup32-21.10rc5

(b) the name+version number corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for impishpup32-21.10rc5. Please note that all Chinese language debs rely on a suitable half-Chinese language deb already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

for more information about the fcitx, ibus, scim and yong pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

[icake]

peebee released JammyPup32 22.04rc1 (UPupJJ+D-22.04) on Mar 11, 2022; and 22.04rc2 on Mar 18, 2022

more information and discussions: https://forum.puppylinux.com/viewtopic. ... 255#p51255

download JammyPup32-22.04RC+1 and 2 isoes: https://sourceforge.net/projects/zestyp ... mmy%2B/RC/

I have created 4 half-Chinese language pets each for jammypup32 22.04 rc1 and rc2:
fcitx Chinese input platform: fcitx_4.2.７-en-zh-bionic-14.3.8.pet (17 mb)
ibus Chinese input platform: ibus_1.5.17-en-zh-bionic-14.3.8.pet (34 mb)
scim Chinese input platform: scim_1.4.14-en-zh-bionic-14.3.8.pet (14 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-14.3.8.pet (9 mb)

Plus 2 Chinese language pets each for jammypup32 22.04 rc1 and rc2:
Simplified Chinese:
jammypup-22.04rc2-zhcn-14.3.8.pet (4 mb)
jammypup-22.04rc1-zhcn-14.3.8.pet (4 mb)

Traditional Chinese:
jammypup-22.04rc2-zhhk-14.3.8.pet (4 mb)
jammypup-22.04rc1-zhhk-14.3.8.pet (4 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in jammypup32 22.04 rc1 and rc2

(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for jammypup32 22.04 rc1 and rc2. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

For more information about the fcitx, ibus, scim and yong half-Chinese language pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

[icake]

BarryK has released EasyOS Dunfell-series 3.4.3 on Mar 19, 2022

more information and annoucement notes: https://bkhome.org/news/202203/easyos-v ... eased.html

download addresses: https://distro.ibiblio.org/easyos/amd64 ... ell/3.4.3/

I have created these half-Chinese language pets for easydunfell 3.4.3:
fcitx Chinese input platform: fcitx64_4.2.7-en-zh-bionic-21.2.6.pet (14 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.2.6.pet (31 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-21.2.6.pet (9 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-21.2.6.pet (8 mb)

Please note that ibus Chinese input platform cannot input Chinese in Libreoffice 7 and seamonkey browser that comes with easyos dunfell 3.4.3. If you want to run a browser with ibus, please try light and palemoon (28.4.0).

Plus 2 Chinese language pets each for easydunfell 3.4.3:
Simplified Chinese:
easydunfell-3.4.3-zhcn-21.2.6.pet (6 mb)

Traditional Chinese:
easydunfell-3.4.3-zhhk-21.2.6.pet (5 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in easydunfell 3.4.3

(b) the 2 name+version number corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for easydunfell 3.4.3. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

more information about the fcitx, ibus, scim and yong pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

[icake]

peebee recently released VoidPup32 and VoidPup64: 22.02+1 on Mar 13, 2022 and 22.02+2 on Mar 19, 2022

More information and discussions: https://forum.puppylinux.com/viewtopic.php?t=5016

Download isoes:
VoidPup64 22.02+2: https://sourceforge.net/projects/vpup/f ... o/download
VoidPup64 22.02+1: https://sourceforge.net/projects/vpup/f ... o/download
VoidPup32 22.02+2: https://sourceforge.net/projects/vpup/f ... o/download
VoidPup32 22.02+1: https://sourceforge.net/projects/vpup/f ... o/download

I have created these half-Chinese language pets for VoidPup32 and VoidPup64 22.02+1 and +2:
x86_64:
fcitx Chinese input platform: fcitx64_4.2.7-en-zh-bionic-21.0.3f.pet (12 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-21.0.3f.pet (12 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-21.0.3f.pet (8 mb)

x86:
fcitx Chinese input platform: fcitx_4.2.9-en-zh-bionic-20.1.2.pet (22 mb)
ibus Chinese input platform: ibus_1.5.17-en-zh-bionic-20.1.2.pet (34 mb)
scim Chinese input platform: scim_1.4.18-en-zh-bionic-20.1.2.pet (16 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-20.1.2.pet (8 mb)

Plus 2 Chinese language pets each for VoidPup32 and VoidPup64 22.02+1 and +2 :
x86_64:
Simplified Chinese:
voidpup64-22.02.02-zhcn-21.0.3f.pet (4 mb)
voidpup64-22.02.01-zhcn-21.0.3f.pet (4 mb)

Traditional Chinese:
voidpup64-22.02.02-zhhk-21.0.3f.pet (3 mb)
voidpup64-22.02.01-zhhk-21.0.3f.pet (3 mb)

x86:
Simplified Chinese:
voidpup-22.02.02-zhcn-20.1.2.pet (3 mb)
voidpup-22.02.01-zhcn-20.1.2.pet (3 mb)

Traditional Chinese:
voidpup-22.02.02-zhhk-20.1.2.pet (3 mb)
voidpup-22.02.01-zhhk-20.1.2.pet (3 mb)

To use:
(a) any 1 of the half-Chinese language pets will enable you to display and input Chinese in VoidPup64 22.02.01 to 22.02.02（use 21.0.3f pets）and VoidPup32 22.02.01 to 22.02.02 (use 20.1.2 pets）

(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for VoidPup32 and VoidPup64 22.02+1 and +2. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

For more information about the fcitx, ibus, scim and yong half-Chinese language pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

[icake]

dimkr released 64 bit vanillaupup 22.03 beta 3 on Feb 26, 2022; beta4 on Mar 13, 2022; beta5 on Mar 14, 2022, beta8 on Mar 17, 2022

more information and discussions: viewtopic.php?t=5290

download isoes:
vanillaupup-22.03-beta3.iso: https://github.com/dimkr/woof-CE/releas ... 2.03-beta3
vanillaupup-22.03-beta4.iso: https://github.com/dimkr/woof-CE/releas ... 2.03-beta4
vanillaupup-22.03-beta5.iso: https://github.com/dimkr/woof-CE/releas ... lay-kbuild
vanillaupup-22.03-beta6.iso: https://github.com/dimkr/woof-CE/releas ... lay-kbuild
vanillaupup-22.03-beta7.iso: https://github.com/dimkr/woof-CE/releas ... lay-kbuild
vanillaupup-22.03-beta8.iso: https://github.com/dimkr/woof-CE/releas ... lay-kbuild

I have created 4 half-Chinese language pets for vanillaupup 22.03 beta4, 5 and 8:
fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-21.3.0s.pet (14 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.3.0s.pet (34 mb)
scim Chinese input platform: scim64_1.4.9-en-zh-bionic-21.3.0s.pet (13 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-21.3.0s.pet (9 mb)

Plus 2 Chinese language pets each for vanillaupup 22.03 beta4, 5 and 8:

Simplified Chinese:
vanillaupup64-22.03beta8-zhcn-21.0.0b.pet (4 mb)
vanillaupup64-22.03beta5-zhcn-21.0.0b.pet (4 mb)
vanillaupup64-22.03beta4-zhcn-21.0.0b.pet (4 mb)

Traditional Chinese:
vanillaupup64-22.03beta8-zhhk-21.0.0b.pet (3 mb)
vanillaupup64-22.03beta5-zhhk-21.0.0b.pet (3 mb)
vanillaupup64-22.03beta4-zhhk-21.0.0b.pet (3 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in vanillaupup 22.03 beta4, 5 and 8

(b) the 2 name+version number corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for vanillaupup 22.03 beta4, 5 and 8. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

more information about the fcitx, ibus, scim and yong pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

[icake]

mistfire has recently released QuickPup64 22.01 beta9 (Mar 31, 2022), beta11 (Apr 5, 2021)

More information and forum discussions: viewtopic.php?t=3171&start=173

Download iso:
quickpup64_22.01-beta-9.iso: https://drive.google.com/file/d/1LZyVzM ... OSRz-flAyO
quickpup64_22.01-beta-11.iso: https://drive.google.com/file/d/1tVPL5K ... InbEy6islJ

I have created 4 half-Chinese language pets for QuickPup 22.01 beta9 and 11:

fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-21.2.5.pet (14 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.2.5.pet (33 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-21.2.5.pet (16 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-21.2.5.pet (8 mb)

Plus 4 Chinese language pets each for QuickPup 22.01 beta9 and 11:
Simplified Chinese:
quickpup64-22.01beta9-zhcn-21.2.5.pet (3 mb)
quickpup64-22.01beta11-zhcn-21.2.5.pet (3 mb)

Traditional Chinese:
quickpup64-22.01beta9-zhhk-21.2.5.pet (3 mb)
quickpup64-22.01beta11-zhhk-21.2.5.pet (3 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in QuickPup 22.01 beta9 and 11

(b) the name+version number corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for QuickPup 22.01 beta9 and 11. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

for more information about the fcitx, ibus, scim and yong half-Chinese pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

[icake]

dimkr recently released Vanilla Dpup 9.0.39 (both x86 and x86_64) and 9.1.18 (x86_64 only) recently

More information: viewtopic.php?t=4093

Download iso:
https://vanilla-dpup.github.io
https://github.com/vanilla-dpup/releases/releases

I have created 4 half-Chinese language pets each for Vanilla Dpup 9.0.39 (both x86_64 and x86) ; and 9.1.18 (x86_64 only) :
x86_64:
fcitx Chinese input platform: fcitx64_4.2.7-en-zh-bionic-21.1.2a.pet (15 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.1.2a.pet (33 mb)
scim Chinese input platform: scim64_1.4.14-en-zh-bionic-21.1.2a.pet (12 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-21.1.2a.pet (8 mb)

x86:
fcitx Chinese input platform: fcitx_4.2.７-en-zh-bionic-20.1.1.pet (19 mb)
ibus Chinese input platform: ibus_1.5.17-en-zh-bionic-20.1.1.pet (34 mb)
scim Chinese input platform: scim_1.4.14-en-zh-bionic-20.1.1.pet (13 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-20.1.1.pet (8 mb)

Plus 2 Chinese language pets each for Vanilla Dpup 9.0.39 (both x86_64 and x86) and 9.1.18 (x86_64 only) :
x86_64:
Simplified Chinese:
vanilladpup64-9.1.18-zhcn-21.1.2a.pet (3 mb)
vanilladpup64-9.0.39-zhcn-21.1.2a.pet (3 mb)

Traditional Chinese:
vanilladpup64-9.1.18-zhhk-21.1.2a.pet (3 mb)
vanilladpup64-9.0.39-zhhk-21.1.2a.pet (3 mb)

x86:
Simplified Chinese:
vanilladpup-9.0.39-zhcn-20.1.1.pet (3 mb)

Traditional Chinese:
vanilladpup-9.0.39-zhhk-20.1.1.pet (2 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in x86_64 Vanilla Dpup 9.0.39 to 9.1.18（use 21.1.2a pets）and x86 Vanilla Dpup 9.0.39 (use 20.1.1 pets）

(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for x86_64 Vanilla Dpup 9.0.39 to 9.1.18 and x86 Vanilla Dpup 9.0.39. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

For more information about the fcitx, ibus, scim and yong half-Chinese language pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

[icake]

BarryK has released EasyOS Dunfell-series 3.4.5 on Apr 8, 2022 and 3.4.6 on Apr 16, 2022

more information and annoucement notes:
https://bkhome.org/news/202204/easyos-v ... eased.html
https://bkhome.org/news/202204/easyos-v ... eased.html

download addresses:
https://distro.ibiblio.org/easyos/amd64 ... ell/3.4.6/
https://distro.ibiblio.org/easyos/amd64 ... ell/3.4.5/

I have created these half-Chinese language pets for easydunfell 3.4.5 and 6:
fcitx Chinese input platform: fcitx64_4.2.7-en-zh-bionic-21.2.6.pet (14 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.2.6.pet (31 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-21.2.6.pet (9 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-21.2.6.pet (8 mb)

Please note that ibus Chinese input platform cannot input Chinese in Libreoffice 7 and seamonkey browser that comes with easyos dunfell 3.4.5 and 6. If you want to run a browser with ibus, please try light and palemoon (28.4.0).

Plus 2 Chinese language pets each for easydunfell 3.4.5 and 6:
Simplified Chinese:
easydunfell-3.4.6-zhcn-21.2.6.pet (6 mb)
easydunfell-3.4.5-zhcn-21.2.6.pet (6 mb)

Traditional Chinese:
easydunfell-3.4.6-zhhk-21.2.6.pet (5 mb)
easydunfell-3.4.5-zhhk-21.2.6.pet (5 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in easydunfell 3.4.5 and 6

(b) the 2 name+version number corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for easydunfell 3.4.5 and 6. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

more information about the fcitx, ibus, scim and yong pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

[icake]

peebee released UPupFF+D-20.12+12.iso on Apr 10, 2022

more information and discussions: http://distro.ibiblio.org/puppylinux/pu ... pupff%2Bd/

download UPupFF+D-20.12+12.iso: https://sourceforge.net/projects/zestyp ... -Focal%2B/

I have created 4 half-Chinese language pets each for UPupFF+D-20.12+12:

fcitx Chinese input platform: fcitx_4.2.9-en-zh-bionic-20.0.0s.pet (16 mb)
ibus Chinese input platform: ibus_1.5.17-en-zh-bionic-20.0.0s.pet (28 mb)
scim Chinese input platform: scim_1.4.14-en-zh-bionic-20.0.0s.pet (20 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-20.0.0s.pet (8 mb)

Plus 2 Chinese language pets for UPupFF+D-20.12+12:
Simplified Chinese: upupffD-20.12.12-zhcn-20.0.0s.pet (2 mb)
Traditional Chinese: upupffD-20.12.12-zhhk-20.0.0s.pet (2 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in UPupFF+D-20.12+12

(b) the name+version number corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for UPupFF+D-20.12+12. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

for more information about the fcitx, ibus, scim and yong pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

[icake]

dimkr released 64 bit vanillaupup 22.04.14 on Mar 27, 2022

more information and discussions: viewtopic.php?t=5290

download isoes:
https://github.com/dimkr/woof-CE/releases

I have created 4 half-Chinese language pets for vanillaupup 22.04.00:
fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-21.3.0s.pet (14 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.3.0s.pet (34 mb)
scim Chinese input platform: scim64_1.4.9-en-zh-bionic-21.3.0s.pet (13 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-21.3.0s.pet (9 mb)

Plus 2 Chinese language pets each for vanillaupup 22.03.00:

Simplified Chinese:
vanillaupup64-22.04.14-zhcn-21.0.0b.pet (4 mb)

Traditional Chinese:
vanillaupup64-22.04.14-zhhk-21.0.0b.pet (3 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in vanillaupup 22.04.14

(b) the 2 name+version number corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for vanillaupup 22.04.14. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).more information about the fcitx, ibus, scim and yong pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

[icake]

peebee released JammyPup32 22.04+0 (UPupJJ+D-22.04+0) on Apr 22, 2022

more information and discussions: viewtopic.php?p=51255#p51255

download JammyPup32-22.04+0 iso: https://sourceforge.net/projects/zestyp ... -Jammy%2B/

I have created 4 half-Chinese language pets each for jammypup32 22.04.00:
fcitx Chinese input platform: fcitx_4.2.７-en-zh-bionic-14.3.8.pet (17 mb)
ibus Chinese input platform: ibus_1.5.17-en-zh-bionic-14.3.8.pet (34 mb)
scim Chinese input platform: scim_1.4.14-en-zh-bionic-14.3.8.pet (14 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-14.3.8.pet (9 mb)

Plus 2 Chinese language pets each for jammypup32 22.04.00:
Simplified Chinese:
jammypup-22.04.00-zhcn-14.3.8.pet (4 mb)

Traditional Chinese:
jammypup-22.04.00-zhhk-14.3.8.pet (4 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in jammypup32 22.04.00

(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for jammypup32 22.04.00. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

For more information about the fcitx, ibus, scim and yong half-Chinese language pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

[icake]

peebee released JammyPup32 22.04+2 (UPupJJ+D-22.04+2) on May 9, 2022

more information and discussions: https://forum.puppylinux.com/viewtopic.php?t=5799

download JammyPup32-22.04+2 iso: http://distro.ibiblio.org/puppylinux/pu ... -22.04.htm

I have created 4 half-Chinese language pets each for jammypup32 22.04.02:
fcitx Chinese input platform: fcitx_4.2.７-en-zh-bionic-14.3.8.pet (17 mb)
ibus Chinese input platform: ibus_1.5.17-en-zh-bionic-14.3.8.pet (34 mb)
scim Chinese input platform: scim_1.4.14-en-zh-bionic-14.3.8.pet (14 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-14.3.8.pet (9 mb)

Plus 2 Chinese language pets each for jammypup32 22.04.02:
Simplified Chinese: jammypup-22.04.02-zhcn-14.3.8.pet (4 mb)
Traditional Chinese: jammypup-22.04.02-zhhk-14.3.8.pet (4 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in jammypup32 22.04.02

(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for jammypup32 22.04.02. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

For more information about the fcitx, ibus, scim and yong half-Chinese language pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

[icake]

peebee released BionicPup32-8.0+30.iso on Apr 8, 2022

more information and discussions: https://forum.puppylinux.com/viewtopic.php?t=165

download bionicpup32-8.0+30-uefi.iso:
https://sourceforge.net/projects/zestyp ... pup-ionic/
https://sourceforge.net/projects/zestyp ... o/download

I have created 4 half-Chinese language pets for BionicPup32 8.0.30:
fcitx Chinese input platform: fcitx_4.2.9-en-zh-bionic-20.0.1.pet (17 mb)
ibus Chinese input platform: ibus_1.5.7-en-zh-bionic-20.0.1.pet (29 mb)
scim Chinese input platform: scim_1.4.14-en-zh-bionic-20.0.1.pet (16 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-20.0.1.pet (8 mb)

Plus 2 Chinese language pets each for BionicPup32 8.0.30:
Simplified Chinese: bionicpup32-8.0.30-zhcn-20.0.1.pet (4 mb)
Traditional Chinese: bionicpup32-8.0.30-zhhk-20.0.1.pet (4 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in BionicPup32 8.0.30

(b) the Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for BionicPup32 8.0.30. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

for more information about the fcitx, ibus, scim and yong half-Chinese pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

[icake]

After releasing JL64-801b2 in 2018, Dry Falls has released JL64-805 on Feb 28, 2022

More information: https://forum.puppylinux.com/viewtopic.php?t=5302

Download Just-Lighthouse64-805.iso: https://mega.nz/folder/RttEAZQC#Yf4DHD7E4hIivbUbhK2uxQ

I have created 3 half-Chinese language pets for JL64-805:
fcitx Chinese input platform half-Chinese language pets: fcitx64_4.2.7-en-zh-raring-14.1.0.pet (18 mb)
scim Chinese input platform half-Chinese language pets: scim64_1.4.14-en-zh-raring-14.1.0.pet (14 mb)
yong Chinese input platform half-Chinese language pets: yong3264_20201122-en-zh-raring-14.1.0.pet (9 mb)

Plus 2 Chinese language pets each for JL64-805:
Simplified Chinese: jlh64-8.0.5-zhcn-14.1.0.pet (5 mb)
Traditional Chinese: jlh64-8.0.5-zhhk-14.1.0.pet (5 mb)

To use:
(a) any 1 of the 3 half-Chinese language pets will enable you to display and input Chinese in Just-Lighthouse64-805

(b) the Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for Just-Lighthouse64-805. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

for more information about the fcitx, scim and yong half-Chinese pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.