NoblePup32 - Ubuntu NobleNumbat + Debian Bookworm Github Woof-CE build

[peebee]

32-bit "usrmerge" build with kernel 6.6.x

See this post for date of latest build on Github available from Sourceforge

Downloads & details:
https://distro.ibiblio.org/puppylinux/p ... -24.04.htm
https://sourceforge.net/projects/pb-gh- ... 2_release/

Github Woof-CE build details:
https://github.com/puppylinux-woof-CE/w ... upupnn%2Bd
https://github.com/peabee/releases/blob ... upupnn.yml

Download map:
https://sourceforge.net/projects/pb-gh- ... /stats/map

Screenshot.png (177.98 KiB) Viewed 3485 times

NoblePup32.png (5.71 KiB) Viewed 3351 times

[peebee]

reserved

[peebee]

reserved

[Rantanplan]

Hello @peebee

I try noblenumbat.
I've an issue :
In lxterminal, urvxt or xterm terminal my locale is unrecognized.
And the frenchies letters é è à... are ignored.
Thanks to you.

Friendly

[peebee]

Hello @peebee

I try noblenumbat.
I've an issue :
In lxterminal, urvxt or xterm terminal my locale is unrecognized.
And the frenchies letters é è à... are ignored.
Thanks to you.

Friendly

Hi @Rantanplan is this different behaviour to JammyPup32? Are French letters recognised in other apps? e.g. Abiword? Geany? Are there error messages if you run the app from a terminal?

[Rantanplan]

Hi @peebee,

this issue only appears with the terminals : lxterminal, urxvt and mp console editor.
Accentuated letters are recognized in abiword, gnumeric, leafpad, geany, notecase, osmo, pfind...

All the best.

Friendly

[BologneChe]

@Rantanplan

I did a test under Virtualbox. I used two keyboard layouts (fr and fr_ca). Strangely, special characters specific to Molière's language are available (é, è, ç, ê, à) for urvxt and lxterminal.

[Rantanplan]

@BologneChe

thank you for your tests.

Made new test with fr_CA layout : same result.
See joined picture.

I didn't load samba...sfs : is it the problem ?

To complete, pup_sysinfo report (partly) :

Code: Select all

====> BASE SYSTEM <====

Computer Profile:
 Machine                    Packard Bell BV                  EasyNote MZ35 (version: NA)
 Mainboard                  Packard Bell BV                  EasyNote MZ35 (version: D3B)
 + BIOS                     Packard Bell                     V0.14                            | Date: 11/15/2006 | Type: Legacy
 + CPU                      Intel(R) Celeron(R) M CPU 410 @ 1.46GHz (1 cores)
 + RAM                      Total: 862 MB | Used: 623 MB (72.2%) | Actual Used: 423 MB (49.0%)
 Battery                    Status: full | Capacity: 100%
 + device-0                 BAT1
 Graphics                   Resolution: 1280x800 pixels | Display Server: X.Org 1.21.1.7
 + device-0                 Advanced Micro Devices, Inc. [AMD/ATI] RC410M [Mobility Radeon Xpress 200M] [1002:5a62]
 Audio                      ALSA
 + device-0                 Advanced Micro Devices, Inc. [AMD/ATI] IXP SB4x0 High Definition Audio Controller [1002:437b] (rev 01)
 Network                    enp9s2
 + device-0                 Ethernet: Realtek Semiconductor Co., Ltd. RTL-8100/8101L/8139 PCI Fast Ethernet Adapter [10ec:8139] (rev 10)
 + device-1                 Network: Ralink corp. RT2561/RT61 rev B 802.11g [1814:0302]
 Printers                   CUPS installed
 + device-0                 DefaultPrinter CUPS-PDF
 Drives                     Total: 88.9G
 + sda                      ID-0: ST980811A (74.5G)
 + sdb                      ID-1: USB 2.0 FD (14.5G)
 Partitions                 Mounted-FS      Size  Used Avail Use%
 + sda2                     /dev/sda2        68G   34G   35G  50%
 + sdb1                     /dev/sdb1       4.0G  3.4G  541M  87%

and "greped" on "keyboard" :

Code: Select all

[    1.641991] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
Dec 22 08:02:30 puppypc30780 kern.info kernel: [    1.641991] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[   471.133] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   471.133] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[   471.151] (II) event3  - Power Button: device is a keyboard
[   471.229] (II) event3  - Power Button: device is a keyboard
[   471.233] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[   471.233] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[   471.239] (II) event4  - Video Bus: device is a keyboard
[   471.259] (II) event4  - Video Bus: device is a keyboard
[   471.263] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   471.263] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[   471.268] (II) event2  - Power Button: device is a keyboard
[   471.285] (II) event2  - Power Button: device is a keyboard
[   471.329] (**) Telink Wireless Receiver Consumer Control: Applying InputClass "evdev keyboard catchall"
[   471.329] (**) Telink Wireless Receiver Consumer Control: Applying InputClass "libinput keyboard catchall"
[   471.336] (II) event6  - Telink Wireless Receiver Consumer Control: device is a keyboard
[   471.355] (II) event6  - Telink Wireless Receiver Consumer Control: device is a keyboard
[   471.360] (**) Telink Wireless Receiver System Control: Applying InputClass "evdev keyboard catchall"
[   471.361] (**) Telink Wireless Receiver System Control: Applying InputClass "libinput keyboard catchall"
[   471.368] (II) event7  - Telink Wireless Receiver System Control: device is a keyboard
[   471.388] (II) event7  - Telink Wireless Receiver System Control: device is a keyboard
[   471.395] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[   471.395] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[   471.395] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[   471.395] (**) AT Translated Set 2 keyboard: Applying InputClass "Keyboard Defaults"
[   471.395] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[   471.395] (**) AT Translated Set 2 keyboard: always reports core events
[   471.399] (II) event0  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[   471.400] (II) event0  - AT Translated Set 2 keyboard: device is a keyboard
[   471.404] (II) event0  - AT Translated Set 2 keyboard: device removed
[   471.416] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[   471.420] (II) event0  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[   471.421] (II) event0  - AT Translated Set 2 keyboard: device is a keyboard
[   471.481] (**) Telink Wireless Receiver Consumer Control: Applying InputClass "evdev keyboard catchall"
[   471.481] (**) Telink Wireless Receiver Consumer Control: Applying InputClass "libinput keyboard catchall"
[  1805.947] (EE) event0  - AT Translated Set 2 keyboard: client bug: event processing lagging behind by 27ms, your system is too slow
[  1924.717] (EE) event0  - AT Translated Set 2 keyboard: client bug: event processing lagging behind by 29ms, your system is too slow

Maybe, the issue is my slow system (see the last two lines).

Ciao

[Rantanplan]

Hi @peebee
hi @BologneChe

I've downloaded the last version of noblenumbat on github.
My issue is solved.
All is clear.
I'm happy.

Many thanks again and always.

Best to you.

[Rantanplan]

Hello @peebee,

When using pupNobleNumbat, I tested mtpdevice.
I was unable to view the contents of the android device.
It seems that mtpdevice uses go-mtpfs.
I opened a terminal and ran go-mtpfs (before, create mount point then go-mtpfs [mount point]), but I couldn't see the contents of the mtp device.
With pupmtp and simple-mtpfs, I'm fine.

Thanks for your help.
Best regards.

[bigpuppyfan]

Thanks for all the work into Woof-CE and all the pups, peebee. NoblePup is just as great

An issue I've encountered: the chromium sfs listed to download doesn't work, and this appears to be secondary to usrmerge. Have tried the debian version (https://sourceforge.net/projects/lxpup/ ... /debian32/) - same issue (there were also a few missing libraries when trying this version, but retrieved them through PPM until eventually getting the same errors as in the former version).

Also, a JWM bug, I presume. After going to desktop settings and selecting a theme which does not contain the upper tray (standard puppy, for instance), or if manually removing that upper tray, pTheme becomes permanently half-broken (gives a JWM error after trying to change most settings)

[peebee]

An issue I've encountered: the chromium sfs listed to download doesn't work,

You do need to to do a restart of the window manager after you have installed it..... this calls fix-chromium.sh - you can do it manually if you want.

[bigpuppyfan]

You do need to to do a restart of the window manager after you have installed it..... this calls fix-chromium.sh - you can do it manually if you want.

Thanks peebee. As I did this under PUPMODE 5, it hadn't run the script automatically, but the script has allowed chromium to run. Although still with a number of errors on terminal, but that's a problem in my machine as I now see that the new kernel causes some issues between with nouveau and my card. nvidia has dropped support for x86 drivers for this card and the last version won't compile with kernels 6.5+, so I'll use the jammypup32 kernel to sort