Page 8 of 13
icake Chinese language pets for voidpup64 22.02+10 and voidpup32 22.02+10
Posted: Tue Nov 01, 2022 12:04 am
by icake
peebee released VoidPup32 22.02+10 and VoidPup64 22.02+10 on Oct 6, 2022
more information: https://forum.puppylinux.com/viewtopic.php?t=5270
download iso:
VoidPup64 22.02+10 iso: https://sourceforge.net/projects/vpup/files/VoidPup64
VoidPup32 22.02+10 iso: https://sourceforge.net/projects/vpup/files/VoidPup32/
I have created 5 half-Chinese language pets for voidpup64 22.02+10 and 6 half-Chinese language pets for voidpup32 22.02+10:
voidpup64:
fcitx Chinese input platform: fcitx64_4.2.7-en-zh-bionic-21.0.3f.pet (12 mb)
gcin Chinese input platform: gcin64_2.9.0-en-zh-bionic-21.0.3f.pet (5 mb)
hime Chinese input platform: hime64_0.9.11-en-zh-bionic-21.0.3f.pet (5 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-21.0.3f.pet (12 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-21.0.3f.pet (8 mb)
voidpup32:
fcitx Chinese input platform: fcitx_4.2.9-en-zh-bionic-20.2.8.pet (24 mb)
gcin Chinese input platform: gcin32_2.9.0-en-zh-bionic-20.2.8.pet (13 mb)
hime Chinese input platform: hime32_0.9.11-en-zh-bionic-20.2.8.pet (12 mb)
ibus Chinese input platform: ibus_1.5.17-en-zh-bionic-20.2.8.pet (38 mb)
scim Chinese input platform: scim_1.4.18-en-zh-bionic-20.2.8.pet (17 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-20.2.8.pet (10 mb)
Plus 2 Chinese language pets each for voidpup64 22.02+10 and voidpup32 22.02+10:
voidpup64:
Simplified Chinese: void64-22.02.10-zhcn-21.0.3f.pet (4 mb)
Traditional Chinese: void64-22.02.10-zhhk-21.0.3f.pet (3 mb)
voidpup32:
Simplified Chinese: void-22.02.10-zhcn-20.2.8.pet (3 mb)
Traditional Chinese: void-22.02.10-zhhk-20.2.8.pet (3 mb)
To use:
(a) any 1 of the half-Chinese language pets will enable you to display and input Chinese in voidpup64 22.02+10 (please use the 21.0.3f pets) and voidpup32 22.02+10 (please use the 20.2.8 pets)
(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for voidpup64 22.02+10 and voidpup32 22.02+10. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).
For more information about the fcitx, ibus, scim and yong half-Chinese language pets, please see the first posting of this subject
All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the
first posting of this subject for download addresses.
icake Chinese language pets for Fatdog64-813
Posted: Tue Nov 01, 2022 12:07 am
by icake
The Fatdog Team had released Fatdog64-813 on Oct 7, 2022
More information about the Fatdog64-813:
https://distro.ibiblio.org/fatdog/web/latest.html
Download Fatdog64-813:
http://distro.ibiblio.org/fatdog/iso/
http://ftp.cc.uoc.gr/mirrors/linux/fatdog/iso//
http://ftp.nluug.nl/ibiblio/distributions/fatdog/iso/
(A) I have created 5 half-Chinese language pets for Fatdog64-813:
fcitx Chinese input platform: fcitx64_4.2.7-en-zh-raring-321.0.5.txz (21 mb)
gcin Chinese input platform: gcin64_2.8.5-en-zh-raring-321.0.5.txz (13 mb)
hime Chinese input platform: hime64_0.9.11-en-zh-raring-321.0.5.txz (10 mb)
scim Chinese input platform: scim64_1.4.14-en-zh-raring-321.0.5.txz (14 mb)
yong Chinese input platform: yong64_2.5.0-en-zh-raring-321.0.5.txz (10 mb)
(B) I have also created 2 Chinese language pets for Fatdog64-813:
Simplified Chinese: fatdog64-813-zhcn-321.0.5.txz (4 mb)
Traditional Chinese: fatdog64-813-zhhk-321.0.5.txz (3 mb)
To use:
1. after install any 1 of the 5 half-Chinese language pets under (a): your Fatdog64 813 system can display and input Chinese (desktop menus, sub-menus and icon labels are still English)
2. after install any 1 of the 5 half-Chinese language pets under (a) and also install 1 of the 2 the version corresponding Chinese language pets under (b), your Fatdog64 813 system can display and input Chinese; plus your desktop menus, sub-menus and icon labels are changed to Simplified Chinese or Traditional Chinese
(C) I have also created an icake combo Chinese language pet for Fatdog64-813:
icake64-fatdog64-813-combo-est-fghsy-321.0.5.txz(70 mb)
After installing this icake combo Chinese language pet, user can select:
a. 1 user interface language from: English, Simplified Chinese and Traditional Chinese
b. 1 Chinese input method platform (number of Chinese input methods included) from:
1. fcitx (33)
2. gcin (15)
3. hime (10)
4. scim (23)
5. yong (25)
so the total number of different live systems that can be setup from this icake Chinese combo iso is 15:
18 = 3 [user interface languages] X 5 [Chinese input method platforms]
for more information about the fcitx64, gcin64, hime64, scim64 and yong half-Chinese language pets, please see the first postings of this subject
All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.
icake Chinese language pets for UPupFF+D-20.12+13
Posted: Tue Nov 01, 2022 12:09 am
by icake
peebee released UPupFF+D-20.12+13.iso on Oct 15, 2022
more information and discussions: https://forum.puppylinux.com/viewtopic.php?t=405
download UPupFF+D-20.12+13.iso: https://sourceforge.net/projects/zestyp ... o/download
I have created 6 half-Chinese language pets each for UPupFF+D-20.12+13:
fcitx Chinese input platform: fcitx32_4.2.9-en-zh-bionic-20.1.5.pet (22 mb)
gcin Chinese input platform: gcin32_2.8.2-en-zh-bionic-20.1.5.pet (5 mb)
hime Chinese input platform: hime32_0.9.11-en-zh-bionic-20.1.5.pet (5 mb)
ibus Chinese input platform: ibus32_1.5.17-en-zh-bionic-20.1.5.pet (46 mb)
scim Chinese input platform: scim32_1.4.18-en-zh-bionic-20.1.5.pet (13 mb)
yong Chinese input platform: yong32_2.5.0-en-zh-bionic-20.1.5.pet (9 mb)
Plus 2 Chinese language pets for UPupFF+D-20.12+13:
Simplified Chinese: upupffD-20.12.13-zhcn-20.1.5.pet (4 mb)
Traditional Chinese: upupffD-20.12.13-zhhk-20.1.5.pet (3 mb)
To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in UPupFF+D-20.12+13
(b) the name+version number corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for UPupFF+D-20.12+13. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).
for more information about the fcitx, gcin, hime, ibus, scim and yong pets, please see the first posting of this subject
All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.
icake Chinese language pets for 32 bit Vanilla Dpup 9.0.47; 9.2.19 and 10.0.42
Posted: Tue Nov 01, 2022 12:11 am
by icake
dimkr recently released 32 bit Vanilla Dpup 9.0.47; 9.2.19 and 10.0.42
More information: viewtopic.php?t=5039
Download iso:
https://vanilla-dpup.github.io
https://github.com/vanilla-dpup/releases/releases
I have created 6 half-Chinese language pets each for 32 bit Vanilla Dpup 9.0.47, 9.2.19 and 10.0.42:
for 9.0.47:
fcitx Chinese input platform: fcitx_4.2.9-en-zh-bionic-20.1.1.pet (19 mb)
gcin Chinese input platform: gcin32_2.8.2-en-zh-bionic-20.1.1.pet (45 mb)
hime Chinese input platform: hime32_0.9.11-en-zh-bionic-20.1.1.pet (45 mb)
ibus Chinese input platform: ibus_1.5.17-en-zh-bionic-20.1.1.pet (34 mb)
scim Chinese input platform: scim_1.4.18-en-zh-bionic-20.1.1.pet (13 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-20.1.1.pet (9 mb)
for 9.2.19 and 10.0.42:
fcitx Chinese input platform: fcitx32_4.2.9-en-zh-bionic-20.2.2.pet (22 mb)
gcin Chinese input platform: gcin32_2.8.2-en-zh-bionic-20.2.2.pet (5 mb)
hime Chinese input platform: hime32_0.9.11-en-zh-bionic-20.2.2.pet (5 mb)
ibus Chinese input platform: ibus32_1.5.17-en-zh-bionic-20.2.2.pet (46 mb)
scim Chinese input platform: scim32_1.4.18-en-zh-bionic-20.2.2.pet (13 mb)
yong Chinese input platform: yong32_2.5.0-en-zh-bionic-20.2.2.pet (9 mb)
Plus 2 Chinese language pets each for 32 bit Vanilla Dpup 9.0.47, 9.2.19 and 10.0.42:
Simplified Chinese:
vanilladpup-9.0.47-zhcn-20.1.1.pet (3 mb)
vanilladpup-9.2.19-zhcn-20.2.2.pet (3 mb)
vanilladpup-10.0.42-zhcn-20.2.2.pet (3 mb)
Traditional Chinese:
vanilladpup-9.0.47-zhhk-20.1.1.pet (2 mb)
vanilladpup-9.2.19-zhhk-20.2.2.pet (2 mb)
vanilladpup-10.0.42-zhhk-20.2.2.pet (2 mb)
To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in 32 bit Vanilla Dpup 9.0.47(use 20.1.1 pets)and 32 bit Vanilla Dpup 9.2.19 and 10.0.42 (use 20.2.2 pets)
(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for 32 bit Vanilla Dpup 0.0.47, 9.2.19 and 10.0.42. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).
For more information about the fcitx, gcin, hime, ibus, scim and yong half-Chinese language pets, please see the first posting of this subject
All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.
icake Chinese language pets for KineticPup32 22.10+0 and 22.10+PR3
Posted: Tue Nov 01, 2022 12:13 am
by icake
peebee released KineticPup32 22.10+0 on Oct 21, 2022 and 22.10+PR3 in early Oct 2022
more information and discussions: https://forum.puppylinux.com/viewtopic.php?p=69987
download KineticPup32-22.10+0.iso: http://distro.ibiblio.org/puppylinux/pu ... -22.10.htm
I have created 6 half-Chinese language pets each for KineticPup32 22.10+0 and 22.10+PR3:
fcitx Chinese input platform: fcitx32_4.2.9-en-zh-bionic-20.5.0.pet (26 mb)
gcin Chinese input platform: gcin32_2.9.0-en-zh-bionic-20.5.0.pet (6 mb)
hime Chinese input platform: hime32_0.9.11-en-zh-bionic-20.5.0.pet (6 mb)
ibus Chinese input platform: ibus32_1.5.17-en-zh-bionic-20.5.0.pet (49 mb)
scim Chinese input platform: scim32_1.4.18-en-zh-bionic-20.5.0.pet (15 mb)
yong Chinese input platform: yong32_2.5.0-en-zh-bionic-20.5.0.pet (10 mb)
Plus 2 Chinese language pets for KineticPup32 22.10+0 and 22.10+PR3:
Simplified Chinese:
kineticpup-22.10.00-zhcn-20.5.0.pet (4 mb)
kineticpup-22.10.pr3-zhcn-20.5.0.pet (3 mb)
Traditional Chinese:
kineticpup-22.10.00-zhhk-20.5.0.pet (3 mb)
kineticpup-22.10.pr3-zhhk-20.5.0.pet (4 mb)
To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in KineticPup32 22.10+0 and 22.10+PR3
(b) the name+version number corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for KineticPup32 22.10+0 and 22.10+PR3. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).
for more information about the fcitx, gcin, hime, ibus, scim and yong pets, please see the first posting of this subject
All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.
icake Chinese language pets for Vanilla Dpup x86_64 9.0.47
Posted: Tue Nov 01, 2022 12:14 am
by icake
dimkr recently released Vanilla Dpup x86_64 9.0.47 on Jun 4, 2022
More information: https://forum.puppylinux.com/viewtopic.php?t=4093
download iso: https://github.com/vanilla-dpup/releases/releases
I have created 6 half-Chinese language pets for x86_64 Vanilla Dpup 9.0.47:
fcitx Chinese input platform: fcitx64_4.2.7-en-zh-bionic-21.1.2a.pet (15 mb)
gcin Chinese input platform: gcin64_2.8.2-en-zh-bionic-21.1.2a.pet (5 mb)
hime Chinese input platform: hime64_0.9.22-en-zh-bionic-21.1.2a.pet (5 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.1.2a.pet (33 mb)
scim Chinese input platform: scim64_1.4.14-en-zh-bionic-21.1.2a.pet (12 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-21.1.2a.pet (8 mb)
Plus 2 Chinese language pets each for x86_64 Vanilla Dpup 9.0.47:
Simplified Chinese: vanilladpup64-9.0.47-zhcn-21.1.2a.pet (4 mb)
Traditional Chinese: vanilladpup64-9.0.47-zhhk-21.1.2a.pet (3 mb)
To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in x86_64 Vanilla Dpup 9.0.47
(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for x86_64 Vanilla Dpup 9.0.47. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).
For more information about the fcitx, gcin, hime, ibus, scim and yong half-Chinese language pets, please see the first posting of this subject
All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.
icake Chinese language pets for debiandog bookworm (20221026) tint2 desktop
Posted: Thu Dec 01, 2022 1:00 am
by icake
on 2022-Nov-04, fredx181 released an update bookworm build script and DebLive_bookworm-tint2-2022-10-26-amd64-UEFI-merged-usr.iso
for more information and discussions: viewtopic.php?t=5069
download DebLive_bookworm-tint2-2022-10-26-amd64-UEFI-merged-usr.iso https://github.com/DebianDog/MakeLive/r ... ed-usr.iso
I have created 6 Half-Chinese deb each for debiandog bookworm (20221026) tint2 desktop:
fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-121.6.2a.deb (18 mb)
gcin Chinese input platform: gcin64_2.9.0-en-zh-bionic-121.6.2a.deb (12 mb)
hime Chinese input platform: hime64_0.9.11-en-zh-bionic-121.6.2a.deb (12 mb)
ibus Chinese input platform: ibus64_1.5.25-en-zh-bionic-121.6.2a.deb (37 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-121.6.2a.deb (9 mb)
yong Chinese input platform: yong64_1.5.25-en-zh-bionic-121.6.2a.deb (9 mb)
Plus 2 Chinese language debs each for debiandog bookworm (20221026) tint2 desktop:
Simplified Chinese: DL64_bookworm_tint2_20221026-zhcn-121.6.2a.deb (3 mb)
Traditional Chinese: DL64_bookworm_tint2_20221026-zhhk-121.6.2a.deb (3 mb)
To use:
(a) the half-Chinese language deb will enable you to display and input Chinese in debiandog bookworm (20221026) tint2 desktop
(b) the name+version corresponding Chinese language pets will give you Simplified Chinese (zhcn deb) or Traditional Chinese (zhhk deb) menus, icon labels, tooltips for debiandog bookworm (20221026) tint2 desktop. Please note that all Chinese language debs rely on a suitable half-Chinese language deb already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).
for more information about the fcitx, gcin, hime, ibus, scim and yong debs, please see the first posting of this subject (same as for fcitx pets)
Download addresses for these half-Chinese and Chinese language debs are also available in the first posting of this subject.
icake Chinese language pets for easydunfell 4.4.2 to 4.5.0
Posted: Thu Dec 01, 2022 1:01 am
by icake
BarryK has recently released EasyOS Dunfell-series 64 bit 4.4.2, 4.4.3 and 4.5.0
more information and annoucement notes: viewforum.php?f=63
download addresses:
4.5.0: https://distro.ibiblio.org/easyos/amd64 ... /2022/4.5/
4.4.3: https://distro.ibiblio.org/easyos/amd64 ... 022/4.4.3/
4.4.2: https://distro.ibiblio.org/easyos/amd64 ... 022/4.4.2/
I have created these icake Chinese language pets for easydunfell 4.4.2, 4.4.3 and 4.5.0:
(A) 6 half-Chinese pets:
fcitx Chinese input platform: fcitx64_4.2.7-en-zh-bionic-21.2.7.pet (14 mb)
gcin Chinese input platform: gcin64_2.9.0-en-zh-bionic-21.2.7.pet (9 mb)
hime Chinese input platform: hime64_0.9.11-en-zh-bionic-21.2.7.pet (6 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.2.7.pet (35 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-21.2.7.pet (10 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-21.2.7.pet (9 mb)
Please note that 64 bit ibus Chinese input platform cannot input Chinese in Libreoffice 7 and seamonkey browser that comes with easyos dunfell 4.4.2 to 4.5.0. If you want to run a browser with 64 bit ibus, please try light and palemoon (28.4.0).
(B) 2 Chinese language pets each for easydunfell 4.4.2 to 4.5.0:
Simplified Chinese:
easydunfell-4.5.0-zhcn-21.2.7.pet (4 mb)
easydunfell-4.4.3-zhcn-21.2.7.pet (4 mb)
easydunfell-4.4.2-zhcn-21.2.7.pet (4 mb)
Traditional Chinese:
easydunfell-4.5.0-zhhk-21.2.7.pet (3 mb)
easydunfell-4.4.3-zhhk-21.2.7.pet (3 mb)
easydunfell-4.4.2-zhhk-21.2.7.pet (3 mb)
To use:
(a) any 1 of the half-Chinese language pets will enable you to display and input Chinese in easydunfell 4.4.2 to 4.5.0
(b) the 2 name+version number corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for easydunfell 4.4.2 to 4.5.0. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).
(C) 1 icake combo Chinese language pet for easydunfell 4.5.0: icake64-easydunfell-4.5.0-combo-est-fghisy-21.2.7.pet(206 mb)
After installing this icake combo Chinese language pet, user can select:
a. 1 user interface language from: English, Simplified Chinese and Traditional Chinese
b. 1 Chinese input method platform (number of Chinese input methods included) from:
1. fcitx (33)
2. gcin (15)
3. hime (10)
4. ibus (25)
5. scim (23)
6. yong (25)
so the total number of different live systems that can be setup from this icake Chinese combo iso is 18:
18 = 3 [user interface languages] X 6 [Chinese input method platforms]
more information about the fcitx, gcin, hime, ibus, scim and yong pets, please see the first posting of this subject
All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.uage pets are now available for download from the public sharing folders. Please see the first posting for download addresses.
icake Chinese language pets for Vanilla Dpup x86_64 9.1.27, 9.2.17, 10.0.75 and 10.0.89xorg
Posted: Thu Dec 01, 2022 1:02 am
by icake
dimkr recently released Vanilla Dpup x86_64 9.1.27, 9.2.17, 10.0.75 and 10.0.89xorg
More information: viewtopic.php?t=4093
download iso: https://github.com/vanilla-dpup/releases/releases
I have created 6 half-Chinese language pets for:
x86_64 Vanilla Dpup 9.1.27 and 9.2.17:
fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-21.2.2.pet (19 mb)
gcin Chinese input platform: gcin64_2.8.2-en-zh-bionic-21.2.2.pet (5 mb)
hime Chinese input platform: hime64_0.9.11-en-zh-bionic-21.2.2.pet (5 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.2.2.pet (36 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-21.2.2.pet (14 mb)
yong Chinese input platform: yong64_2.5.0-en-zh-bionic-21.2.2.pet (10 mb)
and for x86_64 Vanilla Dpup 10.0.75 and 10.0.89xorg
fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-21.5.1.pet (19 mb)
gcin Chinese input platform: gcin64_2.8.2-en-zh-bionic-21.5.1.pet (5 mb)
hime Chinese input platform: hime64_0.9.11-en-zh-bionic-21.5.1.pet (5 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.5.1.pet (39 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-21.5.1.pet (14 mb)
yong Chinese input platform: yong64_2.5.0-en-zh-bionic-21.5.1.pet (10 mb)
Plus 2 Chinese language pets each for x86_64 Vanilla Dpup 9.1.27 to 10.0.89xorg:
Simplified Chinese:
vanilladpup64-10.0.89xorg-zhcn-21.5.1.pet (4 mb)
vanilladpup64-10.0.75-zhcn-21.5.1.pet (4 mb)
vanilladpup64-9.2.17-zhcn-21.2.2.pet (4 mb)
vanilladpup64-9.1.27-zhcn-21.2.2.pet (4 mb)
Traditional Chinese:
vanilladpup64-10.0.89xorg-zhhk-21.5.1.pet (3 mb)
vanilladpup64-10.0.75-zhhk-21.5.1.pet (3 mb)
vanilladpup64-9.2.17-zhhk-21.2.2.pet (3 mb)
vanilladpup64-9.1.27-zhhk-21.2.2.pet (3 mb)
To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in x86_64 Vanilla Dpup 9.1.27 and 9.2.17 (use the 21.2.2 pets) and 10.0.75 and 10.0.89xorg (use the 21.5.1 pets)
(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for x86_64 Vanilla Dpup 9.1.27 to 10.0.89xorg. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).
For more information about the fcitx, gcin, hime, ibus, scim and yong half-Chinese language pets, please see the first posting of this subject
All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.
icake Chinese language pets for S15Pup32-22.11-RC, slacko-8.2.2-264 and S15Pup64-22.11-RC
Posted: Thu Dec 01, 2022 1:03 am
by icake
peebee released a number of slackware built puppy isoes on Oct 31, 2022:
S15Pup32-22.11-RC.iso
slacko-8.2.2-264.iso
S15Pup64-22.11-RC.iso
more information and discussions: viewtopic.php?t=7227
download isoes:
32 bit: https://sourceforge.net/projects/spup/f ... 5Pup32/RC/
64 bit: https://sourceforge.net/projects/spup/f ... 5Pup64/RC/
I have created 5 half-Chinese language pets for:
32 bit S15Pup32-22.11-RC.iso and slacko-8.2.2-264:
fcitx Chinese input platform: fcitx_4.2.7-en-zh-raring-14.3.9.pet (19 mb)
gcin Chinese input platform: gcin32_2.9.0-en-zh-raring-14.3.9.pet (20 mb)
hime Chinese input platform: hime32_0.9.11-en-zh-raring-14.3.9.pet (18 mb)
scim Chinese input platform: scim_1.4.14-en-zh-raring-14.3.9.pet (14 mb)
yong Chinese input platform: yong32_2.5.0-en-zh-raring-14.3.9.pet (10 mb)
and for 64 bit S15Pup64-22.11-RC.iso
fcitx Chinese input platform: fcitx64_4.2.7-en-zh-raring-14.0.9.pet (16 mb)
hime Chinese input platform: hime64_0.9.11-en-zh-raring-14.0.9.pet (5 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-raring-14.0.9.pet (53 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-raring-14.0.9.pet (13 mb)
yong Chinese input platform: yong64_2.5.0-en-zh-raring-14.0.9.pet (10 mb)
Plus 2 Chinese language pets each for S15Pup32-22.11-RC, slacko-8.2.2-264 and S15Pup64-22.11-RC
Simplified Chinese:
s15pup32-22.11.rc-zhcn-14.3.9.pet (4 mb)
slacko-8.2.2-264-zhcn-14.3.9.pet (4 mb)
s15pup64-22.11.rc-zhcn-14.0.9.pet (4 mb)
Traditional Chinese:
s15pup32-22.11.rc-zhhk-14.3.9.pet (3 mb)
slacko-8.2.2-264-zhhk-14.3.9.pet (3 mb)
s15pup64-22.11.rc-zhhk-14.0.9.pet (3 mb)
To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in s15pup32-22.11-rc and slacko-8.2.2-264 (use the 14.3.9 pets) and s15pup64-22.11.rc (use the 14.0.9 pets)
(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for S15Pup32-22.11-RC, slacko-8.2.2-264 and S15Pup64-22.11-RC. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).
For more information about the fcitx, gcin, hime, ibus, scim and yong half-Chinese language pets, please see the first posting of this subject
All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.
icake Chinese language pets for Jammypup 9.8
Posted: Thu Dec 01, 2022 1:04 am
by icake
Grey released Jammypup 9.8 on Nov 01, 2022
more information and discussions: viewtopic.php?t=7238
download jammypup64-9.8.iso: https://mega.nz/file/Yk1VwQbJ#EKBPT-_S9 ... NhO13ap9jQ
I have created 6 half-Chinese language pets for Jammypup 9.8:
fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-21.0.5.pet (18 mb)
gcin Chinese input platform: gcin64_2.9.0-en-zh-bionic-21.0.5.pet (5 mb)
hime Chinese input platform: hime64_0.9.11-en-zh-bionic-21.0.5.pet (5 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.0.5.pet (42 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-21.0.5.pet (13 mb)
yong Chinese input platform: yong64_2.5.0-en-zh-bionic-21.0.5.pet (10 mb)
Plus 2 Chinese language pets each for Jammypup 9.8:
Simplified Chinese: jammypup64-9.8-zhcn-21.0.5.pet (4 mb)
Traditional Chinese: jammypup64-9.8-zhhk-21.0.5.pet (3 mb)
To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in Jammypup 9.8
(b) the 2 name+version number corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for Jammypup 9.8. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).
more information about the fcitx, gcin, hime, ibus, scim and yong pets, please see the first posting of this subject
All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.
icake Chinese language pets for jammypup32 22.04.07 and 08
Posted: Thu Dec 01, 2022 1:05 am
by icake
peebee released JammyPup32 22.04+7 on Oct 8, 2022 and JammyPup32 22.04+8 on Nov 14, 2022
more information and discussions: viewtopic.php?t=5799
download isoes:
JammyPup-22.04+8.iso (323 mb): https://sourceforge.net/projects/zestyp ... o/download
JammyPup-22.04+7.iso (337 mb): https://sourceforge.net/projects/zestyp ... o/download
I have created 6 half-Chinese language pets each for jammypup32 22.04.07 and 08:
fcitx Chinese input platform: fcitx_4.2.7-en-zh-bionic-14.3.8.pet (17 mb)
gcin Chinese input platform: gcin32_2.9.0-en-zh-bionic-14.3.8.pet (12 mb)
hime Chinese input platform: hime32_0.9.11-en-zh-bionic-14.3.8.pet (12 mb)
ibus Chinese input platform: ibus_1.5.17-en-zh-bionic-14.3.8.pet (34 mb)
scim Chinese input platform: scim_1.4.14-en-zh-bionic-14.3.8.pet (14 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-14.3.8.pet (9 mb)
Plus 2 Chinese language pets each for jammypup32 22.04.07 and 08:
Simplified Chinese:
jammypup-22.04.08-zhcn-14.3.8.pet (4 mb)
jammypup-22.04.07-zhcn-14.3.8.pet (4 mb)
Traditional Chinese:
jammypup-22.04.08-zhhk-14.3.8.pet (3 mb)
jammypup-22.04.07-zhhk-14.3.8.pet (3 mb)
To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in jammypup32 22.04.07 and 08
(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for jammypup32 22.04.07 and 08. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).
For more information about the fcitx, gcin, hime, ibus, scim and yong half-Chinese language pets, please see the first posting of this subject
All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.
icake Chinese language pets for Fossapup64-9.6-CE
Posted: Thu Dec 01, 2022 1:05 am
by icake
rockedge released Fossapup64-9.6-CE on Nov 1, 2022
more information: viewtopic.php?t=7234
download Fossapup64-9.6-CE.iso (378 mb) : https://rockedge.org/kernels/data/ISO/F ... 64-9.6.iso
I have created 5 half-Chinese language pets for Fossapup64-9.6-CE:
gcin Chinese input platform: gcin64_2.9.0-en-zh-bionic-21.0.6.pet (5 mb)
hime Chinese input platform: hime64_0.9.11-en-zh-bionic-21.0.6.pet (5 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.0.6.pet (42 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-21.0.6.pet (13 mb)
yong Chinese input platform: yong64_2.5.0-en-zh-bionic-21.0.6.pet (10 mb)
Plus 2 Chinese language pets each for Fossapup64-9.6-CE:
Simplified Chinese: fossapup64-9.6ce-zhcn-21.0.6.pet (4 mb)
Traditional Chinese: fossapup64-9.6ce-zhhk-21.0.6.pet (3 mb)
To use:
(a) any 1 of the 5 half-Chinese language pets will enable you to display and input Chinese in Fossapup64-9.6-CE
(b) the 2 name+version number corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for Fossapup64-9.6-CE. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).
more information about the fcitx, gcin, hime, ibus, scim and yong pets, please see the first posting of this subject
All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.
icake Chinese language pets for QuickPup 22.01 beta27
Posted: Thu Dec 01, 2022 1:06 am
by icake
mistfire has recently released QuickPup64 22.01 beta27 on Nov 6, 2022
More information and forum discussions: https://forum.puppylinux.com/viewtopic.php?t=3171
Download iso: https://drive.google.com/file/d/1bG1zV3 ... WlWPoGVvAA
I have created 6 half-Chinese language pets for QuickPup 22.01 beta27:
fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-21.3.5.pet (23 mb)
gcin Chinese input platform: gcin64_2.9.0-en-zh-bionic-21.3.5.pet (5 mb)
hime Chinese input platform: himg64_0.9.11-en-zh-bionic-21.3.5.pet (5 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.3.5.pet (55 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-21.3.5.pet (10 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-21.3.5.pet (10 mb)
Plus 4 Chinese language pets each for QuickPup 22.01 beta27:
Simplified Chinese: quickpup64-22.01beta27-zhcn-21.3.5.pet (3 mb)
Traditional Chinese: quickpup64-22.01beta27-zhhk-21.3.5.pet (3 mb)
To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in QuickPup 22.01 beta27
(b) the name+version number corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for QuickPup 22.01 beta27. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).
for more information about the fcitx, gcin, hime, ibus, scim and yong half-Chinese pets, please see the first posting of this subject
All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.
icake Chinese language pets for Tahrpup64_6.0.7
Posted: Thu Dec 01, 2022 1:06 am
by icake
mikesir released Tahrpup64_6.0.7 on Nov 11, 2022
more information and discussions: viewtopic.php?t=7316
download tahrpup64_6.0.7.iso (587 mb): https://www.mediafire.com/folder/7yxedk ... up64-6.0.7
I have created 3 half-Chinese language pets for Tahrpup64_6.0.7:
fcitx Chinese input platform: fcitx64_4.2.7-en-zh-raring-13.5.0.pet (14 mb)
scim Chinese input platform: scim64_1.4.14-en-zh-raring-13.5.0.pet (9 mb)
yong Chinese input platform: yong64_2.5.0-en-zh-raring-13.5.0.pet (10 mb)
Plus 2 Chinese language pets each for Tahrpup64_6.0.7:
Simplified Chinese: tahrpup64-6.0.7-zhcn-13.5.0.pet (5 mb)
Traditional Chinese: tahrpup64-6.0.7-zhhk-13.5.0.pet (4 mb)
To use:
(a) any 1 of the 3 half-Chinese language pets will enable you to display and input Chinese in Tahrpup64_6.0.7
(b) the name+version number corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for Tahrpup64_6.0.7. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).
for more information about the fcitx, scim and yong half-Chinese pets, please see the first posting of this subject
All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.
icake Chinese language pets for voidpup64 22.02+11 and voidpup32 22.02+11
Posted: Thu Dec 01, 2022 1:07 am
by icake
peebee released VoidPup32 22.02+11 and VoidPup64 22.02+11 on Nov 19, 2022
more information: viewtopic.php?t=5270
download iso:
VoidPup64 22.02+11 iso: https://sourceforge.net/projects/vpup/files/VoidPup64
VoidPup32 22.02+11 iso: https://sourceforge.net/projects/vpup/files/VoidPup32/
I have created 5 half-Chinese language pets for voidpup64 22.02+10 and 6 half-Chinese language pets for voidpup32 22.02+11:
voidpup64:
fcitx Chinese input platform: fcitx64_4.2.7-en-zh-bionic-21.0.4.pet (17 mb)
gcin Chinese input platform: gcin64_2.9.0-en-zh-bionic-21.0.4.pet (9 mb)
hime Chinese input platform: hime64_0.9.11-en-zh-bionic-21.0.4.pet (5 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-21.0.4.pet (14 mb)
yong Chinese input platform: yong64_2.5.0-en-zh-bionic-21.0.4.pet (10 mb)
voidpup32:
fcitx Chinese input platform: fcitx_4.2.9-en-zh-bionic-20.2.9.pet (26 mb)
gcin Chinese input platform: gcin32_2.9.0-en-zh-bionic-20.2.9.pet (20 mb)
hime Chinese input platform: hime32_0.9.11-en-zh-bionic-20.2.9.pet (18 mb)
ibus Chinese input platform: ibus_1.5.17-en-zh-bionic-20.2.9.pet (38 mb)
scim Chinese input platform: scim_1.4.18-en-zh-bionic-20.2.9.pet (17 mb)
yong Chinese input platform: yong32_2.5.0-en-zh-bionic-20.2.9.pet (10 mb)
Plus 2 Chinese language pets each for voidpup64 22.02+11 and voidpup32 22.02+11:
voidpup64:
Simplified Chinese: void64-22.02.11-zhcn-21.0.4.pet (4 mb)
Traditional Chinese: void64-22.02.11-zhhk-21.0.4.pet (3 mb)
voidpup32:
Simplified Chinese: void-22.02.11-zhcn-20.2.9.pet (4 mb)
Traditional Chinese: void-22.02.11-zhhk-20.2.9.pet (3 mb)
To use:
(a) any 1 of the half-Chinese language pets will enable you to display and input Chinese in voidpup64 22.02+11 (please use the 21.0.4 pets) and voidpup32 22.02+11 (please use the 20.2.9 pets)
(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for voidpup64 22.02+11 and voidpup32 22.02+11. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).
For more information about the fcitx, ibus, gcin, hime, scim and yong half-Chinese language pets, please see the first posting of this subject
All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.
icake Chinese language pets for KineticPup32 22.10+1
Posted: Thu Dec 01, 2022 1:08 am
by icake
peebee released KineticPup32 22.10+1 on Nov 14, 2022
more information and discussions: viewtopic.php?p=69987
download KineticPup32-22.10+1.iso: https://sourceforge.net/projects/zestyp ... inetic%2B/
I have created 6 half-Chinese language pets each for KineticPup32 22.10+1:
fcitx Chinese input platform: fcitx32_4.2.9-en-zh-bionic-20.5.0.pet (26 mb)
gcin Chinese input platform: gcin32_2.9.0-en-zh-bionic-20.5.0.pet (6 mb)
hime Chinese input platform: hime32_0.9.11-en-zh-bionic-20.5.0.pet (6 mb)
ibus Chinese input platform: ibus32_1.5.17-en-zh-bionic-20.5.0.pet (49 mb)
scim Chinese input platform: scim32_1.4.18-en-zh-bionic-20.5.0.pet (15 mb)
yong Chinese input platform: yong32_2.5.0-en-zh-bionic-20.5.0.pet (10 mb)
Plus 2 Chinese language pets for KineticPup32 22.10+1:
Simplified Chinese: kineticpup-22.10.01-zhcn-20.5.0.pet (4 mb)
Traditional Chinese: kineticpup-22.10.01-zhhk-20.5.0.pet (3 mb)
To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in KineticPup32 22.10+1
(b) the name+version number corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for KineticPup32 22.10+1. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).
for more information about the fcitx, gcin, hime, ibus, scim and yong pets, please see the first posting of this subject
All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.
icake Chinese language pets for Vanilla Dpup x86_64 9.2.23, 9.2.26, 9.3.0 beta2
Posted: Sun Jan 01, 2023 12:02 am
by icake
dimkr released Vanilla Dpup x86_64 9.2.23, 9.2.26, 9.3.0 beta2 and 10.0.118xorg
more information: https://forum.puppylinux.com/viewtopic.php?t=7420
download isoes: [/url]https://vanilla-dpup.github.io[/url]
I have created 6 half-Chinese language pets for Vanilla Dpup x86_64 9.2.23, 9.2.26, 9.3.0 beta2:
fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-21.2.2.pet (19 mb)
gcin Chinese input platform: gcin64_2.8.2-en-zh-bionic-21.2.2.pet (5 mb)
hime Chinese input platform: hime64_0.9.11-en-zh-bionic-21.2.2.pet (5 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.2.2.pet (36 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-21.2.2.pet (14 mb)
yong Chinese input platform: yong64_2.5.0-en-zh-bionic-21.2.2.pet (10 mb)
and for Vanilla Dpup x86_64 10.0.118org:
fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-21.5.1.pet (19 mb)
gcin Chinese input platform: gcin64_2.8.2-en-zh-bionic-21.5.1.pet (5 mb)
hime Chinese input platform: hime64_0.9.11-en-zh-bionic-21.5.1.pet (5 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.5.1.pet (39 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-21.5.1.pet (14 mb)
yong Chinese input platform: yong64_2.5.0-en-zh-bionic-21.5.1.pet (10 mb)
Plus 2 Chinese language pets each for x86_64 Vanilla Dpup 9.2.23 to 10.0.118xorg:
Simplified Chinese:
vanilladpup64-9.2.23-zhcn-21.2.2.pet (3 mb)
vanilladpup64-9.2.26-zhcn-21.2.2.pet (3 mb)
vanilladpup64-9.3.0beta-zhcn-21.2.2.pet (3 mb)
vanilladpup64-10.0.118org-zhcn-21.5.1.pet (3 mb)
Traditional Chinese:
vanilladpup64-9.2.23-zhhk-21.2.2.pet (3 mb)
vanilladpup64-9.2.26-zhhk-21.2.2.pet (3 mb)
vanilladpup64-9.3.0beta2-zhhk-21.2.2.pet (3 mb)
vanilladpup64-10.0.118org-zhhk-21.5.1.pet (3 mb)
To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in x86_64 Vanilla Dpup 9.2.23 to 10.0.118xorg
(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for x86_64 9.2.23 to 10.0.118xorg. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).
For more information about the fcitx, gcin, hime, ibus, scim and yong half-Chinese language pets, please see the first posting of this subject
All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.
icake Chinese language pets for Vanilla Dpup 9.2.23, 9.2.26, 9.3.0 beta2 and 10.0.118retro
Posted: Sun Jan 01, 2023 12:03 am
by icake
dimkr released Vanilla Dpup 9.2.23, 9.2.26, 9.3.0 beta2 and 10.0.118retro
more information: viewtopic.php?t=7420
download iso: [/url]https://vanilla-dpup.github.io[/url]
I have created 6 half-Chinese language pets each for Vanilla Dpup 9.2.23, 9.2.26, 9.3.0 beta2 and 10.0.118retro:
fcitx Chinese input platform: fcitx32_4.2.9-en-zh-bionic-20.2.2.pet (22 mb)
gcin Chinese input platform: gcin32_2.8.2-en-zh-bionic-20.2.2.pet (5 mb)
hime Chinese input platform: hime32_0.9.11-en-zh-bionic-20.2.2.pet (5 mb)
ibus Chinese input platform: ibus32_1.5.17-en-zh-bionic-20.2.2.pet (46 mb)
scim Chinese input platform: scim32_1.4.18-en-zh-bionic-20.2.2.pet (13 mb)
yong Chinese input platform: yong32_2.5.0-en-zh-bionic-20.2.2.pet (9 mb)
Plus 2 Chinese language pets each for Vanilla Dpup 9.2.23, 9.2.26, 9.3.0 beta2 and 10.0.118retro:
Simplified Chinese:
vanilladpup-9.2.23-zhcn-20.2.2.pet (3 mb)
vanilladpup-9.2.26-zhcn-20.2.2.pet (3 mb)
vanilladpup-9.3.0beta2-zhcn-20.2.2.pet (3 mb)
vanilladpup-10.0.118retro-zhcn-20.2.2.pet (3 mb)
Traditional Chinese:
vanilladpup-9.2.23-zhhk-20.2.2.pet (3 mb)
vanilladpup-9.2.26-zhhk-20.2.2.pet (3 mb)
vanilladpup-9.3.0beta2-zhhk-20.2.2.pet (3 mb)
vanilladpup-10.0.118retro-zhhk-20.2.2.pet (3 mb)
To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in x86_64 Vanilla Dpup 9.2.23, 9.2.26, 9.3.0 beta2 and 10.0.118retro
(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for x86_64 Vanilla Dpup 9.2.23, 9.2.26, 9.3.0 beta2 and 10.0.118retro. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).
For more information about the fcitx, gcin, hime, ibus, scim and yong half-Chinese language pets, please see the first posting of this subject
All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.
icake Chinese language pets for F96_4-CE
Posted: Sun Jan 01, 2023 12:04 am
by icake
rockedge released F96_4-CE on Nov 19, 2022
more information and discussions: viewtopic.php?t=7387
download F96_4-CE (475 mb): https://rockedge.org/kernels/data/ISO/F ... 6_4-CE.iso
I have created 5 half-Chinese language pets for F96_4-CE:
gcin Chinese input platform: gcin64_2.9.0-en-zh-bionic-21.0.6.pet (5 mb)
hime Chinese input platform: hime64_0.9.11-en-zh-bionic-21.0.6.pet (5 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.0.6.pet (42 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-21.0.6.pet (13 mb)
yong Chinese input platform: yong64_2.5.0-en-zh-bionic-21.0.6.pet (10 mb)
Plus 2 Chinese language pets each for F96_4-CE:
Simplified Chinese: F96_4CE-zhcn-21.0.6.pet (4 mb)
Traditional Chinese: F96_4CE-zhhk-21.0.6.pet (3 mb)
To use:
(a) any 1 of the 5 half-Chinese language pets will enable you to display and input Chinese in F96_4-CE
(b) the 2 name+version number corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for F96_4-CE. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).
more information about the fcitx, gcin, hime, ibus, scim and yong pets, please see the first posting of this subject
All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.
icake Chinese language pets for S15Pup32-22.11.00 and 01, and S15Pup64-22.11.00 and 01
Posted: Sun Jan 01, 2023 12:05 am
by icake
peebee released S15Pup-22.12 64 and 32 bit on Dec 1, 2022 and S15Pup-22.12+1 on Dec 3, 2022
more information and discussions: viewtopic.php?t=7464
download isoes:
S15Pup64: https://sourceforge.net/projects/spup/files/S15Pup64/
S15Pup32: https://sourceforge.net/projects/spup/files/S15Pup32/
I have created 6 half-Chinese language pets for:
32 bit S15Pup32-22.12+0 and +1.iso:
fcitx Chinese input platform: fcitx_4.2.7-en-zh-raring-14.3.9.pet (19 mb)
gcin Chinese input platform: gcin32_2.9.0-en-zh-raring-14.3.9.pet (20 mb)
hime Chinese input platform: hime32_0.9.11-en-zh-raring-14.3.9.pet (18 mb)
ibus Chinese input platform: ibus32_1.5.19-en-zh-raring-14.3.9.pet (39 mb)
scim Chinese input platform: scim_1.4.14-en-zh-raring-14.3.9.pet (14 mb)
yong Chinese input platform: yong32_2.5.0-en-zh-raring-14.3.9.pet (10 mb)
and for 64 bit S15Pup64-22.12+0 and +1.iso
fcitx Chinese input platform: fcitx64_4.2.7-en-zh-raring-14.0.9.pet (16 mb)
gcin Chinese input platform: gcin64_2.8.2-en-zh-raring-14.0.9.pet (7 mb)
hime Chinese input platform: hime64_0.9.11-en-zh-raring-14.0.9.pet (5 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-raring-14.0.9.pet (53 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-raring-14.0.9.pet (13 mb)
yong Chinese input platform: yong64_2.5.0-en-zh-raring-14.0.9.pet (10 mb)
Plus 2 Chinese language pets each for S15Pup32-22.12.00 and 01, and S15Pup64-22.12.00 and 01:
Simplified Chinese:
s15pup32-22.12.00T-zhcn-14.3.9.pet (4 mb)
s15pup32-22.12.01T-zhcn-14.3.9.pet (4 mb)
s15pup64-22.12.00T-zhcn-14.0.9.pet (4 mb)
s15pup64-22.12.01T-zhcn-14.0.9.pet (4 mb)
Traditional Chinese:
s15pup32-22.12.00T-zhhk-14.3.9.pet (3 mb)
s15pup32-22.12.01T-zhhk-14.3.9.pet (3 mb)
s15pup64-22.12.00T-zhhk-14.0.9.pet (3 mb)
s15pup64-22.12.01T-zhhk-14.0.9.pet (3 mb)
To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in s15pup32-22.12 and 22.12+1 (use the 14.3.9 pets) and s15pup64-22.12 and 22.12+1 (use the 14.0.9 pets)
(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for S15Pup32-22.12 and 22.12+1, and S15Pup64-22.12 and 22.12+1. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).
For more information about the fcitx, gcin, hime, ibus, scim and yong half-Chinese language pets, please see the first posting of this subject
All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.
Re: icake Chinese language pets
Posted: Sun Jan 01, 2023 12:07 am
by icake
BarryK has recently released EasyOS Dunfell-series 64 bit 4.5.1 and 4.5.2
more information and annoucement notes: viewforum.php?f=63
download addresses:
4.5.2: https://distro.ibiblio.org/easyos/amd64 ... 022/4.5.2/
4.5.1: https://distro.ibiblio.org/easyos/amd64 ... 022/4.5.1/
I have created these icake Chinese language pets for easydunfell 4.5.1 and 4.5.2:
(A) 6 half-Chinese pets:
fcitx Chinese input platform: fcitx64_4.2.7-en-zh-bionic-21.2.7.pet (14 mb)
gcin Chinese input platform: gcin64_2.9.0-en-zh-bionic-21.2.7.pet (9 mb)
hime Chinese input platform: hime64_0.9.11-en-zh-bionic-21.2.7.pet (6 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.2.7.pet (35 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-21.2.7.pet (10 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-21.2.7.pet (9 mb)
Please note that 64 bit ibus Chinese input platform cannot input Chinese in Libreoffice 7 and seamonkey browser that comes with easyos dunfell 4.5.1 and 4.5.2. If you want to run a browser with 64 bit ibus, please try light and palemoon (28.4.0).
(B) 2 Chinese language pets each for easydunfell 4.5.1 and 4.5.2:
Simplified Chinese:
easydunfell-4.5.2-zhcn-21.2.7.pet (4 mb)
easydunfell-4.5.1-zhcn-21.2.7.pet (4 mb)
Traditional Chinese:
easydunfell-4.5.2-zhhk-21.2.7.pet (3 mb)
easydunfell-4.5.1-zhhk-21.2.7.pet (3 mb)
To use:
(a) any 1 of the half-Chinese language pets will enable you to display and input Chinese in easydunfell 4.5.1 and 4.5.2(b) the 2 name+version number corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for easydunfell 4.5.1 and 4.5.2. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).
more information about the fcitx, gcin, hime, ibus, scim and yong pets, please see the first posting of this subject All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.
icake Chinese language pets for voidpup64 22.02+12 and voidpup32 22.02+12
Posted: Sun Jan 01, 2023 12:08 am
by icake
peebee released VoidPup32 22.02+12 and VoidPup64 22.02+12 on Dec 4, 2022
more information: viewtopic.php?t=5270
download iso:
VoidPup64 22.02+12 iso: https://sourceforge.net/projects/vpup/files/VoidPup64
VoidPup32 22.02+12 iso: https://sourceforge.net/projects/vpup/files/VoidPup32/
I have created 6 half-Chinese language pets for voidpup64 22.02+10 and 6 half-Chinese language pets for voidpup32 22.02+12:
voidpup64:
fcitx Chinese input platform: fcitx64_4.2.7-en-zh-bionic-21.0.4.pet (17 mb)
gcin Chinese input platform: gcin64_2.9.0-en-zh-bionic-21.0.4.pet (9 mb)
hime Chinese input platform: hime64_0.9.11-en-zh-bionic-21.0.4.pet (5 mb)
ibus64 Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.0.4.pet (53 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-21.0.4.pet (14 mb)
yong Chinese input platform: yong64_2.5.0-en-zh-bionic-21.0.4.pet (10 mb)
voidpup32:
fcitx Chinese input platform: fcitx_4.2.9-en-zh-bionic-20.2.9.pet (26 mb)
gcin Chinese input platform: gcin32_2.9.0-en-zh-bionic-20.2.9.pet (20 mb)
hime Chinese input platform: hime32_0.9.11-en-zh-bionic-20.2.9.pet (18 mb)
ibus Chinese input platform: ibus_1.5.17-en-zh-bionic-20.2.9.pet (38 mb)
scim Chinese input platform: scim_1.4.18-en-zh-bionic-20.2.9.pet (17 mb)
yong Chinese input platform: yong32_2.5.0-en-zh-bionic-20.2.9.pet (10 mb)
Plus 2 Chinese language pets each for voidpup64 22.02+12 and voidpup32 22.02+12:
voidpup64:
Simplified Chinese: void64-22.02.12-zhcn-21.0.4.pet (4 mb)
Traditional Chinese: void64-22.02.12-zhhk-21.0.4.pet (3 mb)
voidpup32:
Simplified Chinese: void-22.02.12-zhcn-20.2.9.pet (4 mb)
Traditional Chinese: void-22.02.12-zhhk-20.2.9.pet (3 mb)
To use:
(a) any 1 of the half-Chinese language pets will enable you to display and input Chinese in voidpup64 22.02+12 (please use the 21.0.4 pets) and voidpup32 22.02+12 (please use the 20.2.9 pets)
(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for voidpup64 22.02+12 and voidpup32 22.02+12. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).
For more information about the fcitx, ibus, gcin, hime, scim and yong half-Chinese language pets, please see the first posting of this subject
All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.
icake Chinese language pets for QuickPup 22.01 beta28 and beta28b
Posted: Sun Jan 01, 2023 12:11 am
by icake
mistfire has recently released QuickPup64 22.01 beta28 on Dec 4, 2022 and beta28b on Dec 5, 2022
More information and forum discussions: https://forum.puppylinux.com/viewtopic.php?t=3171
Download iso: https://drive.google.com/file/d/1r-7lpY ... wsn-R9PfWF
I have created 6 half-Chinese language pets for QuickPup 22.01 beta28 and beta28b:
fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-21.3.5.pet (23 mb)
gcin Chinese input platform: gcin64_2.9.0-en-zh-bionic-21.3.5.pet (5 mb)
hime Chinese input platform: himg64_0.9.11-en-zh-bionic-21.3.5.pet (5 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.3.5.pet (55 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-21.3.5.pet (10 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-21.3.5.pet (10 mb)
Plus 4 Chinese language pets each for QuickPup 22.01 beta28 and beta28b:
Simplified Chinese:
quickpup64-22.01beta28b-zhcn-21.3.5.pet (3 mb)
quickpup64-22.01beta28-zhcn-21.3.5.pet (3 mb)
Traditional Chinese:
quickpup64-22.01beta28b-zhhk-21.3.5.pet (3 mb)
quickpup64-22.01beta28-zhhk-21.3.5.pet (3 mb)
To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in QuickPup 22.01 beta28 and beta28b
(b) the name+version number corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for QuickPup 22.01 beta28 and beta28b. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).
for more information about the fcitx, gcin, hime, ibus, scim and yong half-Chinese pets, please see the first posting of this subject
All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.
icake Chinese language pets for LxPupSc64-22.02+4-T; +5-T and LxPupSc32-22.02+4-T-k64; +5-T-k64
Posted: Sun Jan 01, 2023 12:12 am
by icake
peebee recently released LxPupSc64-22.02+4-T and LxPupSc32-22.02+4-T-k64 (Aug 6, 2022); interim LxPupSc32-22.02+5-T-k64 delta to +5-T-k64 ( Nov 26, 2022); interim LxPupSc64-22.02+4-T delta to +5-T (Nov 28, 2022)
more information:
LxPupSc64-22.02+4-T: viewtopic.php?f=121&t=167
LxPupSc32-22.02+4-T: viewtopic.php?t=166
download iso:
LxPupSc64-22.02+4-T and +5-T delta:
http://www.smokey01.com/peebee/LxPupSc64-22.02.htm
https://sourceforge.net/projects/lxpup/ ... LxPupSc64/
delta: https://sourceforge.net/projects/lxpup/ ... 4/updates/
LxPupSc32-22.02+4-T-k64 and +5-T-k64:
http://www.smokey01.com/peebee/LxPupSc32-22.02.htm
https://sourceforge.net/projects/lxpup/ ... r/LxPupSc/
delta: https://sourceforge.net/projects/lxpup/ ... c/updates/
I have created 6 half-Chinese language pets for LxPupSc64-22.02+4-T; +5-T and 6 half-Chinese language pets for LxPupSc32-22.02+4-T-k64, +5-T-k64:
LxPupSc64-22.02+4-T and +5-T:
fcitx Chinese input platform: fcitx64_4.2.7-en-zh-bionic-21.1.8.pet (17 mb)
gcin Chinese input platform: gcin64_2.8.2-en-zh-bionic-21.1.8.pet (7 mb)
hime Chinese input platform: hime64_0.9.11-en-zh-bionic-21.1.8.pet (6 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.1.8.pet (55 mb)
scim Chinese input platform: scim64_1.4.14-en-zh-bionic-21.1.8.pet (17 mb)
yong Chinese input platform: yong64_2.5.0-en-zh-bionic-21.1.8.pet (10 mb)
LxPupSc32-22.02+4-T-k64 and +5-T-k64:
fcitx Chinese input platform: fcitx32_4.2.7-en-zh-raring-14.2.9.pet (21 mb)
gcin Chinese input platform: gcin32_2.8.2-en-zh-raring-14.2.9.pet (10 mb)
hime Chinese input platform: hime32_0.9.11-en-zh-raring-14.2.9.pet (17 mb)
ibus Chinese input platform: ibus32_1.5.17-en-zh-raring-14.2.9.pet (38 mb)
scim Chinese input platform: scim32_1.4.14-en-zh-raring-14.2.9.pet (15 mb)
yong Chinese input platform: yong32_2.5.0-en-zh-raring-14.2.9.pet (10 mb)
Plus 2 Chinese language pets each for LxPupSc64-22.02+4-T; +5-T and LxPupSc32-22.02+4-T-k64; +5-T-k64:
Simplified Chinese:
lxpupsc64-22.02.05T-zhcn-21.1.8.pet (4 mb)
lxpupsc64-22.02.04T-zhcn-21.1.8.pet (4 mb)
lxpupsc-22.02.05Tk64-zhcn-14.2.9.pet (4 mb)
lxpupsc-22.02.04Tk64-zhcn-14.2.9.pet (4 mb)
Traditional Chinese:
lxpupsc64-22.02.05T-zhhk-21.1.8.pet (3 mb)
lxpupsc64-22.02.04T-zhhk-21.1.8.pet (3 mb)
lxpupsc-22.02.05Tk64-zhhk-14.2.9.pet (3 mb)
lxpupsc-22.02.04Tk64-zhhk-14.2.9.pet (3 mb)
To use:
(a) any 1 of the half-Chinese language pets will enable you to display and input Chinese in LxPupSc64-22.02+4-T; +5-T (please use the 21.1.8 pets) and LxPupSc32-22.02+4-T-k64; +5-T-k64 (please use the 14.2.9 pets)
(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for LxPupSc64-22.02+4-T; +5-T and LxPupSc32-22.02+4-T-k64; +5-T-k64. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).
For more information about the fcitx, ibus, gcin, hime, scim and yong half-Chinese language pets, please see the first posting of this subject
All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.
icake Chinese language pets for Triton-8.0
Posted: Tue Jan 31, 2023 12:53 am
by icake
Triton-8.0 was released by petihar on Jan 8, 2023
more information and discussions: https://forum.puppylinux.com/viewtopic.php?t=7758
download Triton-8.0-uefi.iso (472 mb): https://sourceforge.net/projects/triton-8-0/
A. icake Chinese pets
I have created 6 half-Chinese language pets for Triton-8.0:
fcitx Chinese input platform: fcitx32_4.2.7-en-zh-raring-14.2.10.pet (21 mb)
gcin Chinese input platform: gcin32_2.8.2-en-zh-raring-14.2.10.pet (20 mb)
hime Chinese input platform: hime32_0.9.11-en-zh-raring-14.2.10.pet (17 mb)
ibus Chinese input platform: ibus32_1.5.17-en-zh-raring-14.2.10.pet (36 mb)
scim Chinese input platform: scim32_1.4.14-en-zh-raring-14.2.10.pet (15 mb)
yong Chinese input platform: yong32_2.5.0-en-zh-raring-14.2.10.pet (10 mb)
Plus 2 Chinese language pets each for Triton-8.0:
Simplified Chinese: triton-8.0.0-zhcn-14.2.10.pet (4 mb)
Traditional Chinese: triton-8.0.0-zhhk-14.2.10.pet (3 mb)
To use:
(a) any 1 of the half-Chinese language pets will enable you to display and input Chinese in Triton-8.0
(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for Triton-8.0. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).
For more information about the fcitx, ibus, gcin, hime, scim and yong half-Chinese language pets, please see the first posting of this subject.
B. icake combo iso
I have also installed suitable icake Chinese language pets and remastered 2 combo live cds with multi Chinese input platforms:
icake32-Triton-8.0-uefi-est-fghisy.iso
icake32lo628-Triton-8.0-uefi-est-fghisy.iso
All these combo live cds, half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.
icake Chinese language pets for atomicpup-23
Posted: Tue Jan 31, 2023 12:55 am
by icake
8Geee released atomicpup-23 on Jan 13, 2023
more information and discussions: https://forum.puppylinux.com/viewtopic.php?t=6212
download AtomicPup-23.iso (345 mb): https://archive.org/details/AtomicPup-23
I have created 6 half-Chinese language pets for atomicpup-23:
fcitx Chinese input platform: fcitx32_4.2.7-en-zh-raring-14.2.9.pet (21 mb)
gcin Chinese input platform: gcin32_2.8.2-en-zh-raring-14.2.9.pet (10 mb)
hime Chinese input platform: hime32_0.9.11-en-zh-raring-14.2.9.pet (17 mb)
ibus Chinese input platform: ibus32_1.5.17-en-zh-raring-14.2.9.pet (38 mb)
scim Chinese input platform: scim32_1.4.14-en-zh-raring-14.2.9.pet (15 mb)
yong Chinese input platform: yong32_2.5.0-en-zh-raring-14.2.9.pet (10 mb)
Plus 2 Chinese language pets each for atomicpup-23:
Simplified Chinese: atomicpup-23-zhcn-14.2.9.pet (4 mb)
Traditional Chinese: atomicpup-23-zhhk-14.2.9.pet (3 mb)
To use:
(a) any 1 of the half-Chinese language pets will enable you to display and input Chinese in atomicpup-23
(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for atomicpup-23. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).
For more information about the fcitx, ibus, gcin, hime, scim and yong half-Chinese language pets, please see the first posting of this subject
All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.
icake Chinese language pets for bionicpup32ng-8.1+1
Posted: Tue Jan 31, 2023 12:56 am
by icake
peebee released bionicpup32ng-8.1+1 on Dec 29, 2022
more information and discussions: https://forum.puppylinux.com/viewtopic.php?t=7694
download bionicpup32ng-8.1+1.iso (328 mb): https://sourceforge.net/projects/zestyp ... -BionicNG/
A. icake Chinese pets
I have created 6 half-Chinese language pets for bionicpup32ng-8.1+1:
fcitx Chinese input platform: fcitx32_4.2.7-en-zh-bionic-20.0.2.pet (28 mb)
gcin Chinese input platform: gcin32_2.8.2-en-zh-bionic-20.0.2.pet (5 mb)
hime Chinese input platform: hime32_0.9.11-en-zh-bionic-20.0.2.pet (5 mb)
ibus Chinese input platform: ibus32_1.5.17-en-zh-bionic-20.0.2.pet (33 mb)
scim Chinese input platform: scim32_1.4.14-en-zh-bionic-20.0.2.pet (16 mb)
yong Chinese input platform: yong32_2.5.0-en-zh-bionic-20.0.2.pet (10 mb)
Plus 2 Chinese language pets each for bionicpup32ng-8.1+1:
Simplified Chinese: bionicpup32ng-8.1.1-zhcn-20.0.2.pet (4 mb)
Traditional Chinese: bionicpup32ng-8.1.1-zhhk-20.0.2.pet (3 mb)
To use:
(a) any 1 of the half-Chinese language pets will enable you to display and input Chinese in bionicpup32ng-8.1+1
(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for bionicpup32ng-8.1+1. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).
For more information about the fcitx, ibus, gcin, hime, scim and yong half-Chinese language pets, please see the first posting of this subject
B. icake combo iso
I have also installed suitable icake Chinese language pets to bionicpup32ng-8.1+1 and remastered 2 combo live cds with multi Chinese input platforms:
icake32-bionicpup32ng-8.1+1-est-fghisy.iso
icake32lo628-bionicpup32ng-8.1+1-est-fghisy.iso
All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.
icake Chinese language pets for voidpup32 22.02+13, 14
Posted: Tue Jan 31, 2023 12:58 am
by icake
peebee released VoidPup32 22.02+13 and VoidPup64 22.02+13 on Dec 19, 2022 and VoidPup32 22.02+14 and VoidPup64 22.02+14 on Dec 26, 2022
more information: https://forum.puppylinux.com/viewtopic.php?t=5270
download iso:
VoidPup64 22.02+13, 14 iso: https://sourceforge.net/projects/vpup/files/VoidPup64
VoidPup32 22.02+13, 14 iso: https://sourceforge.net/projects/vpup/files/VoidPup32/
I have created 6 half-Chinese language pets for voidpup64 22.02+13, 14 and 6 half-Chinese language pets for voidpup32 22.02+13, 14:
voidpup64:
fcitx Chinese input platform: fcitx64_4.2.7-en-zh-bionic-21.0.4.pet (17 mb)
gcin Chinese input platform: gcin64_2.9.0-en-zh-bionic-21.0.4.pet (9 mb)
hime Chinese input platform: hime64_0.9.11-en-zh-bionic-21.0.4.pet (5 mb)
ibus64 Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.0.4.pet (53 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-21.0.4.pet (14 mb)
yong Chinese input platform: yong64_2.5.0-en-zh-bionic-21.0.4.pet (10 mb)
voidpup32:
fcitx Chinese input platform: fcitx_4.2.9-en-zh-bionic-20.2.9.pet (26 mb)
gcin Chinese input platform: gcin32_2.9.0-en-zh-bionic-20.2.9.pet (20 mb)
hime Chinese input platform: hime32_0.9.11-en-zh-bionic-20.2.9.pet (18 mb)
ibus Chinese input platform: ibus_1.5.17-en-zh-bionic-20.2.9.pet (38 mb)
scim Chinese input platform: scim_1.4.18-en-zh-bionic-20.2.9.pet (17 mb)
yong Chinese input platform: yong32_2.5.0-en-zh-bionic-20.2.9.pet (10 mb)
Plus 2 Chinese language pets each for voidpup64 22.02+13, 14 and voidpup32 22.02+13, 14:
voidpup64:
Simplified Chinese:
void64-22.02.14-zhcn-21.0.4.pet (4 mb)
void64-22.02.13-zhcn-21.0.4.pet (4 mb)
Traditional Chinese:
void64-22.02.14-zhhk-21.0.4.pet (3 mb)
void64-22.02.13-zhhk-21.0.4.pet (3 mb)
voidpup32:
Simplified Chinese:
void-22.02.14-zhcn-20.2.9.pet (4 mb)
void-22.02.13-zhcn-20.2.9.pet (4 mb)
Traditional Chinese:
void-22.02.14-zhhk-20.2.9.pet (3 mb)
void-22.02.13-zhhk-20.2.9.pet (3 mb)
To use:
(a) any 1 of the half-Chinese language pets will enable you to display and input Chinese in voidpup64 22.02+13, 14 (please use the 21.0.4 pets) and voidpup32 22.02+13, 14 (please use the 20.2.9 pets)
(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for voidpup64 22.02+13, 14 and voidpup32 22.02+13, 14. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).
For more information about the fcitx, ibus, gcin, hime, scim and yong half-Chinese language pets, please see the first posting of this subject
All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.
icake Chinese language pets for easydunfell 4.5.3 to 4.5.5
Posted: Tue Jan 31, 2023 1:00 am
by icake
BarryK has recently released EasyOS Dunfell-series 64 bit 4.5.3 to 4.5.5
more information and annoucement notes: https://forum.puppylinux.com/viewforum.php?f=63
download addresses:
4.5.5: https://distro.ibiblio.org/easyos/amd64 ... 022/4.5.5/
4.5.4: https://distro.ibiblio.org/easyos/amd64 ... 022/4.5.4/
4.5.3: https://distro.ibiblio.org/easyos/amd64 ... 022/4.5.3/
I have created these icake Chinese language pets for easydunfell 4.5.3 to 4.5.5:
(A) 6 half-Chinese pets:
fcitx Chinese input platform: fcitx64_4.2.7-en-zh-bionic-21.2.7.pet (14 mb)
gcin Chinese input platform: gcin64_2.9.0-en-zh-bionic-21.2.7.pet (9 mb)
hime Chinese input platform: hime64_0.9.11-en-zh-bionic-21.2.7.pet (6 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.2.7.pet (35 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-21.2.7.pet (10 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-21.2.7.pet (9 mb)
Please note that 64 bit ibus Chinese input platform cannot input Chinese in Libreoffice 7 and seamonkey browser that comes with easyos dunfell 4.5.3 to 4.5.5. If you want to run a browser with 64 bit ibus, please try light and palemoon (28.4.0).
(B) 2 Chinese language pets each for easydunfell 4.5.3 to 4.5.5:
Simplified Chinese:
easydunfell-4.5.5-zhcn-21.2.7.pet (4 mb)
easydunfell-4.5.4-zhcn-21.2.7.pet (4 mb)
easydunfell-4.5.3-zhcn-21.2.7.pet (4 mb)
Traditional Chinese:
easydunfell-4.5.5-zhhk-21.2.7.pet (3 mb)
easydunfell-4.5.4-zhhk-21.2.7.pet (3 mb)
easydunfell-4.5.3-zhhk-21.2.7.pet (3 mb)
To use:
(a) any 1 of the half-Chinese language pets will enable you to display and input Chinese in easydunfell 4.5.3 to 4.5.5
(b) the 2 name+version number corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for easydunfell 4.5.3 to 4.5.5. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).
more information about the fcitx, gcin, hime, ibus, scim and yong pets, please see the first posting of this subject.
All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.