icake Chinese language pets

[icake]

BarryK has released EasyOS Dunfell-series 2.9.0 on Sep 3, 2021

more information, annoucement notes and download addresses:
viewtopic.php?f=63&t=3920
https://bkhome.org/news/202109/easyos-v ... eased.html

I have created 4 half-Chinese language pets each for easydunfell 2.9.0:
fcitx Chinese input platform:
fcitx64_4.2.9-en-zh-bionic-21.1.5.pet (14 mb)

ibus Chinese input platform:
ibus64_1.5.19-en-zh-bionic-21.1.5.pet (31 mb)

scim Chinese input platform:
scim64_1.4.18-en-zh-bionic-21.1.5.pet (11 mb)

yong Chinese input platform:
yong3264_20201122-en-zh-bionic-21.1.5.pet (8 mb)

Please note that only yong Chinese input platform can input Chinese in Libreoffice 7 and seamonkey browser that comes with easyos dunfell 2.9.0. If you want to run a browser with fcitx, ibus or scim, please try light and palemoon (28.4.0).

Plus 2 Chinese language pets each for easydunfell 2.9.0:
Simplified Chinese:
easydunfell-2.9.0-zhcn-21.1.5.pet (4 mb)

Traditional Chinese:
easydunfell-2.9.0-zhhk-21.1.5.pet (4 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in easydunfell 2.9.0

(b) the 2 name corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for easydunfell 2.9.0. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

more information about the fcitx, ibus, scim and yong pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

[icake]

peebee released UPupFF+D-20.12+9 on Sep 12, 2021

More information: viewtopic.php?f=144&t=405

download iso: http://distro.ibiblio.org/puppylinux/pu ... -20.12.htm

I have created 4 half-Chinese language pets each for UPupFF+D-20.12+9:

fcitx Chinese input platform: fcitx_4.2.9-en-zh-bionic-20.0.0s.pet (16 mb)

ibus Chinese input platform: ibus_1.5.17-en-zh-bionic-20.0.0s.pet (28 mb)

scim Chinese input platform: scim_1.4.14-en-zh-bionic-20.0.0s.pet (20 mb)

yong Chinese input platform: yong3264_20201122-en-zh-bionic-20.0.0s.pet (8 mb)

Plus 2 Chinese language pets for UPupFF+D-20.12+9:
Simplified Chinese:
upupffD-20.12.09-zhcn-20.0.0s.pet (2 mb)

Traditional Chinese:
upupffD-20.12.09-zhhk-20.0.0s.pet (2 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in UPupFF+D-20.12+9

(b) the name+version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for UPupFF+D-20.12+9. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

for more information about the fcitx, ibus, scim and yong pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

[icake]

peebee released UPupHH+D-21.04+7 on Sep 12, 2021

more inoformation: viewtopic.php?f=144&t=2736

download UpupHH+D-21.04+7.iso: http://distro.ibiblio.org/puppylinux/pu ... -21.04.htm

I have created 4 half-Chinese language pets each for UPupHH+D-21.04.07:

fcitx Chinese input platform: fcitx_4.2.7-en-zh-bionic-14.3.6.pet (16 mb)

ibus Chinese input platform: ibus_1.5.17-en-zh-bionic-14.3.6.pet (28 mb)

scim Chinese input platform: scim_1.4.14-en-zh-bionic-14.3.6.pet (20 mb)

yong Chinese input platform: yong3264_20201122-en-zh-bionic-14.3.6.pet (8 mb)

Plus 2 Chinese language pets each for UPupHH+D-21.04+7:
Simplified Chinese:
upuphhD-21.04.07-zhcn-14.3.6.pet (2 mb)

Traditional Chinese:
upuphhD-21.04.07-zhhk-14.3.6.pet (2 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in UPupHH+D-21.04.07

(b) the name+version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for UPupHH+D-21.04.07. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

for more information about the fcitx, ibus, scim and yong pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

[icake]

mistfire has recently released QuickPup64 21.08 beta5 (Sep 7, 2021); beta6 (Sep 17, 2021) and beta7 (Sep 19, 2021)

More information and forum discussions: viewtopic.php?f=33&t=3171&start=50

Download iso:
quickpup64_21.08-beta-5.iso: https://drive.google.com/file/d/1zyMoxX ... sp=sharing
quickpup64_21.08-beta-6.iso: https://drive.google.com/file/d/1HAFr7M ... sp=sharing
quickpup64_21.08-beta-7.iso: https://drive.google.com/file/d/1FvLkQX ... sp=sharing

I have created 4 half-Chinese language pets for QuickPup 21.08 beta5 to beta7:

fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-21.2.5.pet (14 mb)

ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.2.5.pet (33 mb)

scim Chinese input platform: scim64_1.4.18-en-zh-bionic-21.2.5.pet (16 mb)

yong Chinese input platform: yong3264_20201122-en-zh-bionic-21.2.5.pet (8 mb)

Plus 4 Chinese language pets each for QuickPup64 21.08beta5 to beta7:
Simplified Chinese:
quickpup64-21.08beta7-zhcn-21.2.5.pet (3 mb)
quickpup64-21.08beta6-zhcn-21.2.5.pet (3 mb)
quickpup64-21.08beta5-zhcn-21.2.5.pet (3 mb)

Traditional Chinese:
quickpup64-21.08beta7-zhhk-21.2.5.pet (3 mb)
quickpup64-21.08beta6-zhhk-21.2.5.pet (3 mb)
quickpup64-21.08beta5-zhhk-21.2.5.pet (3 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in QuickPup64 21.08beta5 to beta7

(b) the name corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for QuickPup64 21.08beta5 to beta7. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

for more information about the fcitx, ibus, scim and yong half-Chinese pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

[icake]

rcrsn51 released DebLive_Bullseye-amd64-8.iso on Sep 14, 2021

for more information and discussions:
viewtopic.php?t=644&start=226
https://www.mediafire.com/file/x1w6sb93 ... 8.iso/file

download DebLive_Bullseye-amd64-8.iso:
https://download1080.mediafire.com/tguu ... md64-8.iso
https://github.com/DebianDog/MakeLive/r ... md64-8.iso

I have created 3 half-Chinese language deb for DebLive_Bullseye-amd64-8.iso:

fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-121.2.5.deb (15 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-121.2.5.deb (9 mb)
yong Chinese input platform: yong64_20201122-en-zh-bionic-121.2.5.deb (7 mb)

Plus 2 Chinese language debs for DebLive_Bullseye-amd64-8.iso:

Simplified Chinese: DL64_bullseye-8-zhcn-121.2.5.deb (3 mb)
Traditional Chinese: DL64_bullseye-8-zhhk-121.2.5.deb (2 mb)

To use:

(a) any 1 of the 3 half-Chinese language deb will enable you to display and input Chinese in DebLive_Bullseye-amd64-8.iso

(b) the name+version number corresponding Chinese language debs will give you Simplified Chinese (zhcn deb) or Traditional Chinese (zhhk deb) menus, icon labels, tooltips for DebLive_Bullseye-amd64-8.iso. Please note that all Chinese language debs rely on a suitable half-Chinese language deb already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

for more information about the fcitx, scim and yong debs, please see the first posting of this subject （same as for the fcitx, scim and yong pets）

Download addresses for these half-Chinese and Chinese language debs are also available in the first posting of this subject.

[icake]

peebee released ImpishPup32 21.10RC0 on Sep 26,2021 and a delta for RC3 on Oct 8, 2021

more information and discussions: viewtopic.php?t=472&start=69

download ImpishPup32-21.10-RC0.iso and ImpishPup32-21.10-RC0.iso_ImpishPup32-21.10-RC3.iso.delta:
https://sourceforge.net/projects/zestyp ... ish%2B/RC/

I have created 4 half-Chinese language pets for ImpishPup3221.10r3:

fcitx Chinese input platform: fcitx_4.2.9-en-zh-bionic-20.0.0a.pet (19 mb)
ibus Chinese input platform: ibus_1.5.17-en-zh-bionic-20.0.0a.pet (29 mb)
scim Chinese input platform: scim_1.4.18-en-zh-bionic-20.0.0a.pet (13 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-20.0.0a.pet (8 mb)

Plus 2 Chinese language pets each for ImpishPup3221.10r3:

Simplified Chinese: impishpup32-21.10rc3-zhcn-20.0.0a.pet (2 mb)
Traditional Chinese: impishpup32-21.10rc3-zhhk-20.0.0a.pet (2 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in impishpup32-21.10rc3

(b) the name+version number corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for impishpup32-21.10rc3. Please note that all Chinese language debs rely on a suitable half-Chinese language deb already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

for more information about the fcitx, ibus, scim and yong pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders.

[icake]

666philb released imppup64 9.6.1 alpha on Sep 30,2021

more information and discussions: viewtopic.php?t=4138

download imppup64-9.6.1.iso: http://distro.ibiblio.org/puppylinux/test/imp/iso/

I have created 4 half-Chinese language pets each for imppup64-9.6.1.iso:

fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-21.0.0b.pet (15 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.0.0b.pet (24 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-21.0.0b.pet (12 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-21.0.0b.pet (8 mb)

Plus 2 Chinese language pets each for imppup64-9.6.1.iso:

Simplified Chinese: imppup64-9.6.1-zhcn-21.0.0b.pet (4 mb)
Traditional Chinese: imppup64-9.6.1-zhhk-21.0.0b.pet (3 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in imppup64-9.6.1.iso

(b) the 2 name+version number corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for imppup64-9.6.1.iso. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

more information about the fcitx, ibus, scim and yong pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

[icake]

BarryK has released EasyOS Dunfell-series 3.0.0 on Oct 12, 2021

more information, annoucement notes and download addresses:
viewtopic.php?t=4185
https://bkhome.org/news/202110/easyos-30-released.html

I have created 4 half-Chinese language pets each for easydunfell 3.0.0:

fcitx Chinese input platform: fcitx64_4.2.7-en-zh-raring-14.0.8.pet (12 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-raring-14.0.8.pet (31 mb)
scim Chinese input platform: scim64_1.4.14-en-zh-raring-14.0.8.pet (12 mb)
yong Chinese input platform: yong3264_20201122-en-zh-raring-14.0.8.pet (8 mb)

Please note that ibus Chinese input platform cannot input Chinese in Libreoffice 7 and seamonkey browser that comes with easyos dunfell 3.0.0. If you want to run a browser with ibus, please try light and palemoon (28.4.0).

Plus 2 Chinese language pets each for easydunfell 3.0.0:

Simplified Chinese: easydunfell-3.0.0-zhcn-14.0.8.pet (3 mb)
Traditional Chinese: easydunfell-3.0.0-zhhk-14.0.8.pet (3 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in easydunfell 3.0.0

(b) the 2 name+version number corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for easydunfell 3.0.0. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

more information about the fcitx, ibus, scim and yong pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

[icake]

peebee released LxPupFocal32-21.02+9 on Sep 13, 2021

More information and discussions: viewtopic.php?t=3544
download LxPupFocal32-21.02+8.iso: https://sourceforge.net/projects/lxpup/ ... xPup21.02/

I have created 4 half-Chinese language pets each for LxPupFocal32-21.02+9

fcitx Chinese input platform: fcitx_4.2.7-en-zh-bionic-14.3.6.pet (16 mb)
ibus Chinese input platform: ibus_1.5.17-en-zh-bionic-14.3.6.pet (28 mb)
scim Chinese input platform: scim_1.4.14-en-zh-bionic-14.3.6.pet (20 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-14.3.6.pet (8 mb)

Plus 2 Chinese language pets for LxPupFocal32-21.02+9:

Simplified Chinese: lxpupffD-21.02.09-zhcn-14.3.6.pet (2 mb)
Traditional Chinese: lxpupffD-21.02.09-zhhk-14.3.6.pet (2 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in LxPupFocal32-21.02+9

(b) the name+version number corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for LxPupFocal32-21.02+9. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

for more information about the fcitx, ibus, scim and yong pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

[icake]

pfeco has recently released BookwormPup64-11.2.03Lite (Sep 7, 2021)

More information and forum discussions:
https://skamilinux.hu/phpBB3/viewtopic. ... b&start=95

Download bookwormpup64-11.2.0-3-Lite.iso: https://drive.google.com/drive/folders/ ... fPqLeveNar

I have created 4 half-Chinese language pets for bookwormpup64-11.2.0-3-Lite:

fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-21.1.0s.pet (14 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.1.0s.pet (33 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-21.1.0s.pet (12 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-21.1.0s.pet (8 mb)

Plus 4 Chinese language pets each for bookwormpup64-11.2.0-3-Lite:

Simplified Chinese: bookwormpup64-11.2.03lite-zhcn-21.1.0s.pet (3 mb)
Traditional Chinese: bookwormpup64-11.2.03lite-zhhk-21.1.0s.pet (3 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in bookwormpup64-11.2.0-3-Lite

(b) the name+version number corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for bookwormpup64-11.2.0-3-Lite. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

for more information about the fcitx, ibus, scim and yong half-Chinese pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

[icake]

mistfire has recently released QuickPup64 21.08 beta9 (Sep 24, 2021); QuickPup64 21.08 beta10 (Oct 12, 2021); QuickPup64 21.08 beta11 (Oct 15, 2021); QuickPup64 21.08 beta12 (Oct 19, 2021)

More information and forum discussions: viewtopic.php?f=33&t=3171&start=64

Download iso:
quickpup64_21.08-beta-9.iso: https://drive.google.com/file/d/1twsB3Y ... sp=sharing
quickpup64_21.08-beta-10.iso: https://drive.google.com/file/d/1yPzewM ... sp=sharing
quickpup64_21.08-beta-11.iso: https://drive.google.com/file/d/1gaa4C- ... sp=sharing
quickpup64_21.08-beta-12.iso: https://drive.google.com/file/d/1LeuLX4 ... sp=sharing

I have created 4 half-Chinese language pets for QuickPup 21.08 beta9, 10, 11 and 12:

fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-21.2.5.pet (14 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.2.5.pet (33 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-21.2.5.pet (16 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-21.2.5.pet (8 mb)

Plus 4 Chinese language pets each for QuickPup64 21.08beta9, 10, 11 and 12:
Simplified Chinese:
quickpup64-21.08beta12-zhcn-21.2.5.pet (3 mb)
quickpup64-21.08beta11-zhcn-21.2.5.pet (3 mb)
quickpup64-21.08beta10-zhcn-21.2.5.pet (3 mb)
quickpup64-21.08beta9-zhcn-21.2.5.pet (3 mb)

Traditional Chinese:
quickpup64-21.08beta12-zhhk-21.2.5.pet (3 mb)
quickpup64-21.08beta11-zhhk-21.2.5.pet (3 mb)
quickpup64-21.08beta10-zhhk-21.2.5.pet (3 mb)
quickpup64-21.08beta9-zhhk-21.2.5.pet (3 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in QuickPup64 21.08beta9, 10, 11 and 12

(b) the name+version number corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for QuickPup64 21.08beta9, 10, 11 and 12. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

for more information about the fcitx, ibus, scim and yong half-Chinese pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

[icake]

peebee released UPupFF+D-20.12+10 on Oct 8, 2021

More information: viewtopic.php?f=144&t=405

download iso:
http://distro.ibiblio.org/puppylinux/pu ... -20.12.htm
https://sourceforge.net/projects/zestyp ... o/download

I have created 4 half-Chinese language pets each for UPupFF+D-20.12+10:

fcitx Chinese input platform: fcitx_4.2.9-en-zh-bionic-20.0.0s.pet (16 mb)
ibus Chinese input platform: ibus_1.5.17-en-zh-bionic-20.0.0s.pet (28 mb)
scim Chinese input platform: scim_1.4.14-en-zh-bionic-20.0.0s.pet (20 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-20.0.0s.pet (8 mb)

Plus 2 Chinese language pets for UPupFF+D-20.12+10:

Simplified Chinese: upupffD-20.12.10-zhcn-20.0.0s.pet (2 mb)
Traditional Chinese: upupffD-20.12.10-zhhk-20.0.0s.pet (2 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in UPupFF+D-20.12+10

(b) the name+version number corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for UPupFF+D-20.12+10. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

for more information about the fcitx, ibus, scim and yong pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

[icake]

The Fatdog Team had released Fatdog64-812rc on Oct 16, 2021

More information about the Fatdog64-812rc:
viewtopic.php?t=4262

Download Fatdog64-811:
http://distro.ibiblio.org/fatdog/iso/
http://ftp.cc.uoc.gr/mirrors/linux/fatdog/iso//
http://ftp.nluug.nl/ibiblio/distributions/fatdog/iso/

(a) I have created 3 half-Chinese language pets for Fatdog64-812rc:

fcitx Chinese input platform: fcitx64_4.2.7-fd64802-en-zh-raring-21.0.0f.txz (15 mb)
scim Chinese input platform: scim64_1.4.14-fd64802-en-zh-raring-21.0.0f.txz (12 mb)
yong Chinese input platform: yong_4.2.0-fd64802-en-zh-raring-21.0.0f.txz (5 mb)

(b) I have also created 2 Chinese language pets for Fatdog64-812rc:

Simplified Chinese: fd64-8.1.2rc-zhcn-21.0.0f.txz (1 mb)
Traditional Chinese: fd64-8.1.2rc-zhhk-21.0.0f.txz (1 mb)

To use:
(c) after install any 1 of the 3 half-Chinese language pets under (a): your Fatdog64 812rc (requires the 802 half-Chinese language pets) system can display and input Chinese (desktop menus, sub-menus and icon labels are still English)

(d) after install any 1 of the 3 half-Chinese language pets under (a) and also install 1 of the 2 the version corresponding Chinese language pets under (b), your Fatdog64 812rc system can display and input Chinese; plus your desktop menus, sub-menus and icon labels are changed to Simplified Chinese or Traditional Chinese

for more information about the fcitx64, scim64 and yong half-Chinese language pets, please see the first postings of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

[icake]

BarryK has released EasyOS Dunfell-series 3.1.0 on Oct 24, 2021 and EasyOS Dunfell-series 3.1.10 on Nov 14, 2021

more information, annoucement notes and download addresses:
viewtopic.php?t=4311
https://bkhome.org/news/202110/easyos-v ... eased.html

I have created 4 half-Chinese language pets each for easydunfell 3.1.0 and 3.1.10:

fcitx Chinese input platform: fcitx64_4.2.7-en-zh-raring-14.0.8.pet (12 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-raring-14.0.8.pet (31 mb)
scim Chinese input platform: scim64_1.4.14-en-zh-raring-14.0.8.pet (12 mb)
yong Chinese input platform: yong3264_20201122-en-zh-raring-14.0.8.pet (8 mb)

Please note that ibus Chinese input platform cannot input Chinese in Libreoffice 7 and seamonkey browser that comes with easyos dunfell 3.1.0 and 3.1.10. If you want to run a browser with ibus, please try light and palemoon (28.4.0).

Plus 2 Chinese language pets each for easydunfell 3.1.0 and 3.1.10:

Simplified Chinese:
easydunfell-3.1.0-zhcn-14.0.8.pet (3 mb)
easydunfell-3.1.10-zhcn-14.0.8.pet (3 mb)

Traditional Chinese:
easydunfell-3.1.0-zhhk-14.0.8.pet (3 mb)
easydunfell-3.1.10-zhhk-14.0.8.pet (3 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in easydunfell 3.1.0 and 3.1.10

(b) the 2 name+version number corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for easydunfell 3.1.0 and 3.1.10. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

more information about the fcitx, ibus, scim and yong pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

[icake]

mistfire has recently released QuickPup64 21.08 beta13 (Oct 24, 2021); QuickPup64 21.08 beta14 (Nov 2, 2021); QuickPup64 21.08 beta15 (Nov 6, 2021); QuickPup64 21.08 beta16 (Nov 8, 2021) and QuickPup64 21.08 beta17 (Nov 20, 2021)

More information and forum discussions: viewtopic.php?f=33&t=3171&start=64

Download iso:
quickpup64_21.08-beta-13.iso: https://drive.google.com/file/d/1yxwHNR ... sp=sharing
quickpup64_21.08-beta-14.iso: https://drive.google.com/file/d/1lpPiqn ... sp=sharing
quickpup64_21.08-beta-15.iso: https://drive.google.com/file/d/1CXoPXZ ... sp=sharing
quickpup64_21.08-beta-16.iso: https://drive.google.com/file/d/16EuOWT ... sp=sharing
quickpup64_21.08-beta-17.iso: https://drive.google.com/file/d/1B19_M0 ... sp=sharing

I have created 4 half-Chinese language pets for QuickPup 21.08 beta13, 14, 15, 16 and 17:

fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-21.2.5.pet (14 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.2.5.pet (33 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-21.2.5.pet (16 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-21.2.5.pet (8 mb)

Plus 4 Chinese language pets each for QuickPup64 21.08beta13, 14, 15, 16 and 17:
Simplified Chinese:
quickpup64-21.08beta17-zhcn-21.2.5.pet (3 mb)
quickpup64-21.08beta16-zhcn-21.2.5.pet (3 mb)
quickpup64-21.08beta15-zhcn-21.2.5.pet (3 mb)
quickpup64-21.08beta14-zhcn-21.2.5.pet (3 mb)
quickpup64-21.08beta13-zhcn-21.2.5.pet (3 mb)

Traditional Chinese:
quickpup64-21.08beta17-zhhk-21.2.5.pet (3 mb)
quickpup64-21.08beta16-zhhk-21.2.5.pet (3 mb)
quickpup64-21.08beta15-zhhk-21.2.5.pet (3 mb)
quickpup64-21.08beta14-zhhk-21.2.5.pet (3 mb)
quickpup64-21.08beta13-zhhk-21.2.5.pet (3 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in QuickPup64 21.08beta13, 14, 15, 16 and 17

(b) the name+version number corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for QuickPup64 21.08beta13, 14, 15, 16 and 17. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

for more information about the fcitx, ibus, scim and yong half-Chinese pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

[icake]

peebee recently released LxPupSc64-21.04+4-T-k64.iso (Oct 29, 2021); LxPupSc-21.04+4-T-k64.iso (Oct 29, 2021) and LxPupSc-21.04+4-T-k64.iso___LxPupSc-21.04+5-T-k64.iso.delta (Nov 11, 2021)

Main features:
LxPupSc64-21.04+4-T: Built from 64-bit Slackware Current components with LXDE desktop
LxPupSc-21.04+4-T-k64: Built from 32-bit Slackware Current components with LXDE desktop

More information:
LxPupSc64-21.04+4-T: viewtopic.php?f=121&t=167
LxPupSc-21.04+4-T-k64: viewtopic.php?f=122&t=168

Download LxPupSc64-21.04+4-T.iso and LxPupSc-21.04+4-T-k64.iso:
https://sourceforge.net/p/lxpup/activit ... 46a4fe7583

LxPupSc64-21.04+0-T iso: https://sourceforge.net/projects/lxpup/ ... o/download
LxPupSc64-21.04+0-T delta to +4: https://sourceforge.net/projects/lxpup/ ... a/download

LxPupSc-21.04+0-T-k64 iso: https://sourceforge.net/projects/lxpup/ ... o/download
LxPupSc-21.04+0-T-k64 delta to +4: https://sourceforge.net/projects/lxpup/ ... a/download

LxPupSc-21.04+4-T-K64 delta to +5:
https://sourceforge.net/projects/lxpup/ ... c/updates/

I have created 4 half-Chinese language pets each for LxPupSc64-21.04+4-T; LxPupSc-21.04+4T-k64 and +5 :
fcitx Chinese input platform:
LxPupSc64-21.04+4-T: fcitx64_4.2.7-en-zh-bionic-21.1.6.pet (17 mb)
LxPupSc-21.04+4-T-k64 and +5: fcitx_4.2.７-en-zh-raring-14.3.6a.pet (15 mb)

ibus Chinese input platform:
LxPupSc64-21.04+4-T: ibus64_1.5.19-en-zh-bionic-21.1.6.pet (34 mb)
LxPupSc-21.04+4-T-k64 and +5: ibus_1.5.17-en-zh-raring-14.3.6a.pet (34 mb)

scim Chinese input platform:
LxPupSc64-21.04+4-T: scim64_1.4.14-en-zh-bionic-21.1.6.pet (16 mb)
LxPupSc-21.04+4-T-k64 and +5: scim_1.4.14-en-zh-raring-14.3.6a.pet (14 mb)

yong Chinese input platform:
LxPupSc64-21.04+4-T: yong3264_20201122-en-zh-bionic-21.1.6.pet (8 mb)
LxPupSc-21.04+4-T-k64 and +5: yong3264_20201122-en-zh-raring-14.3.6a.pet (8 mb)

Plus 2 Chinese language pets each for LxPupSc64-21.04+4-T; LxPupSc-21.04+4-T-k64 and +5:
Simplified Chinese:
lxpupsc64-21.04.04T-zhcn-21.1.6.pet (2 mb)
lxpupsc-21.04.04Tk64-zhcn-14.3.6a.pet (3 mb)
lxpupsc-21.04.05Tk64-zhcn-14.3.6a.pet (3 mb)

Traditional Chinese:
lxpupsc64-21.04.04T-zhhk-21.1.6.pet (3 mb)
lxpupsc-21.04.04Tk64-zhhk-14.3.6a.pet (3 mb)
lxpupsc-21.04.05Tk64-zhhk-14.3.6a.pet (3 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in LxPupSc64 21.04.04 （use 21.1.6 pets）and LxPupSc-21.04+4-T-k64 and +5（use 14.3.6a pets）

(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for LxPupSc64-21.04+4-T; LxPupSc-21.04+4-T-k64 and +5. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

For more information about the fcitx, ibus, scim and yong half-Chinese language pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

[icake]

peebee released ImpishPup32-21.10+1 on Oct 21,2021 and 21.10+2 on Nov 11, 2021

more information and discussions: viewtopic.php?t=472&start=69

download ImpishPup32-21.10+1.iso and +2.iso: https://sourceforge.net/projects/zestyp ... Impish%2B/

I have created 4 half-Chinese language pets for ImpishPup32-21.10.01 and 02:

fcitx Chinese input platform: fcitx_4.2.9-en-zh-bionic-20.0.0a.pet (19 mb)
ibus Chinese input platform: ibus_1.5.17-en-zh-bionic-20.0.0a.pet (29 mb)
scim Chinese input platform: scim_1.4.18-en-zh-bionic-20.0.0a.pet (13 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-20.0.0a.pet (8 mb)

Plus 2 Chinese language pets each for ImpishPup32-21.10.01 and 02:

Simplified Chinese:
impishpup32-21.10.01-zhcn-20.0.0a.pet (2 mb)
impishpup32-21.10.02-zhcn-20.0.0a.pet (2 mb)

Traditional Chinese:
impishpup32-21.10.01-zhhk-20.0.0a.pet (2 mb)
impishpup32-21.10.02-zhhk-20.0.0a.pet (2 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in impishpup32-21.10.01 and 02

(b) the name+version number corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for impishpup32-21.10.01 and 02. Please note that all Chinese language debs rely on a suitable half-Chinese language deb already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

for more information about the fcitx, ibus, scim and yong pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders.

[icake]

peebee released arch32pup-20.05+6 and arch64pup-20.05+6 on Nov 5, 2021

more information : viewtopic.php?f=7&t=124&start=200

download:
Arch64Pup-20.05+6: http://www.smokey01.com/peebee/downloads/a64pup/
Arch32Pup-20.05+6: http://www.smokey01.com/peebee/downloads/a32pup/

I have created 3 half-Chinese language pets each for arch64 20.05.06 and arch32 20.05.06:
fcitx Chinese input platform:
arch64 20.05.06: fcitx64_4.2.7-en-zh-raring-14.0.6.pet (14 mb)
arch32 20.05.06: fcitx_4.2.７-en-zh-raring-14.3.7.pet (16 mb)

(I cannot get ibus to run in arch64 20.05.06 or arch32 20.05.06)

scim Chinese input platform:
arch64 20.05.06: scim64_1.4.14-en-zh-raring-14.0.6.pet (13 mb)
arch32 20.05.06: scim_1.4.14-en-zh-raring-14.3.7.pet (14 mb)

yong Chinese input platform:
arch64 20.05.06: yong3264_20201122-en-zh-raring-14.0.6.pet (9 mb)
arch32 20.05.06: yong3264_20201122-en-zh-raring-14.3.7.pet (9 mb)

Plus 2 Chinese language pets each for arch64 20.05.06 and arch32 20.05.06:
Simplified Chinese:
arch64: arch64-20.05.06-zhcn-14.0.6.pet (2 mb)

arch32: arch32-20.05.06-zhcn-14.3.7.pet (2 mb)

Traditional Chinese:
arch64: arch64-20.05.06-zhhk-14.0.6.pet (2 mb)

arch32: arch32-20.05.06-zhhk-14.3.7.pet (1 mb)

To use:
(a) any 1 of the 3 half-Chinese language pets will enable you to display and input Chinese in arch64 20.05.06 （use 14.0.6 pets） and arch32 20.05.06 （use 14.3.7 pets）

(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for arch64 20.05.06 and arch32 20.05.06. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

For more information about the fcitx, scim and yong half-Chinese language pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

[icake]

The Fatdog Team had released Fatdog64-812 on Nov 9, 2021

More information about the Fatdog64-812:
viewtopic.php?t=4262

Download Fatdog64-812:
http://distro.ibiblio.org/fatdog/iso/
http://ftp.cc.uoc.gr/mirrors/linux/fatdog/iso//
http://ftp.nluug.nl/ibiblio/distributions/fatdog/iso/

(a) I have created 3 half-Chinese language pets for Fatdog64-812:

fcitx Chinese input platform: fcitx64_4.2.7-fd64802-en-zh-raring-21.0.0f.txz (15 mb)
scim Chinese input platform: scim64_1.4.14-fd64802-en-zh-raring-21.0.0f.txz (12 mb)
yong Chinese input platform: yong_4.2.0-fd64802-en-zh-raring-21.0.0f.txz (5 mb)

(b) I have also created 2 Chinese language pets for Fatdog64-812:

Simplified Chinese: fd64-8.1.2-zhcn-21.0.0f.txz (1 mb)
Traditional Chinese: fd64-8.1.2-zhhk-21.0.0f.txz (1 mb)

To use:
(c) after install any 1 of the 3 half-Chinese language pets under (a): your Fatdog64 812 (requires the 802 half-Chinese language pets) system can display and input Chinese (desktop menus, sub-menus and icon labels are still English)

(d) after install any 1 of the 3 half-Chinese language pets under (a) and also install 1 of the 2 the version corresponding Chinese language pets under (b), your Fatdog64 812 system can display and input Chinese; plus your desktop menus, sub-menus and icon labels are changed to Simplified Chinese or Traditional Chinese

for more information about the fcitx64, scim64 and yong half-Chinese language pets, please see the first postings of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

[icake]

dimkr recently released Vanilla Dpup (x86 and x86_64) 9.0.9 (Oct 30, 2021); 9.0.11 (Nov 13, 2021) and 9.0.12 (Nov 20, 2021)

Main features:
The latest 5.10.x kernel with a large selection of drivers, very similar to the Debian Bullseye kernel
PulseAudio and Bluetooth audio support (the Bluetooth tray icon is disabled on x86 to save RAM)
Tear-free and hardware-accelerated rendering using Xwayland (on x86_64 only, with automated fallback to X.Org if unsupported)
Firefox, with privacy-oriented default settings and lower resource consumption, plus extra fonts, for a browsing experience comparable to that on large distros
Almost exclusive use of GTK+ 3 (on x86_64 only), with themes that cover both GTK+ 2 and GTK+ 3
Security features like applications running as spot and auto-enabled firewall
Speed and responsiveness features, like DNS cache, zstd compression and malloc() tuning to reduce waste of RAM
Power user features like vi as the default editor, keyboard shortcuts and tab completion in the terminal

More information: viewtopic.php?t=4093

Download iso: https://github.com/vanilla-dpup/releases/releases

I have created 4 half-Chinese language pets each for x86 and x86_64 Vanilla Dpup 9.0.9, .11 and .12:
fcitx Chinese input platform:
x86_64: fcitx64_4.2.7-en-zh-bionic-21.1.2a.pet (15 mb)
x86: fcitx_4.2.７-en-zh-bionic-20.1.1.pet (19 mb)

ibus Chinese input platform:
x86_64: ibus64_1.5.19-en-zh-bionic-21.1.2a.pet (33 mb)
x86: ibus_1.5.17-en-zh-raring-20.1.1.pet (34 mb)

scim Chinese input platform:
x86_64: scim64_1.4.14-en-zh-bionic-21.1.2a.pet (12 mb)
x86: scim_1.4.14-en-zh-raring-20.1.1.pet (13 mb)

yong Chinese input platform:
x86_64: yong3264_20201122-en-zh-bionic-21.1.2a.pet (8 mb)
x86: yong3264_20201122-en-zh-raring-20.1.1.pet (8 mb)

Plus 2 Chinese language pets each for x86 and x86_64 Vanilla Dpup 9.0.9, .11 and .12:
Simplified Chinese:
x86_64:
vanilladpup64-9.0.12-zhcn-21.1.2a.pet (3 mb)
vanilladpup64-9.0.11-zhcn-21.1.2a.pet (3 mb)
vanilladpup64-9.0.9-zhcn-21.1.2a.pet (3 mb)

x86:
vanilladpup-9.0.12-zhcn-20.1.1.pet (3 mb)
vanilladpup-9.0.11-zhcn-20.1.1.pet (3 mb)
vanilladpup-9.0.9-zhcn-20.1.1.pet (3 mb)

Traditional Chinese:
x86_64:
vanilladpup64-9.0.12-zhhk-21.1.2a.pet (3 mb)
vanilladpup64-9.0.11-zhhk-21.1.2a.pet (3 mb)
vanilladpup64-9.0.9-zhhk-21.1.2a.pet (3 mb)

x86
vanilladpup-9.0.12-zhhk-20.1.1.pet (2 mb)
vanilladpup-9.0.11-zhhk-20.1.1.pet (2 mb)
vanilladpup-9.0.9-zhhk-20.1.1.pet (2 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in x86_64 Vanilla Dpup 9.0.9, .11 and .12 （use 21.1.2a pets）and x86 Vanilla Dpup 9.0.9, .11 and .12（use 20.1.1 pets）

(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for x86 and x86_64 Vanilla Dpup 9.0.9, .11 and .12. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

For more information about the fcitx, ibus, scim and yong half-Chinese language pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

[icake]

BarryK has released EasyOS Dunfell-series 3.1.11 on Nov 22, 2021; 3.1.13 on Dec 7, 2021; 3.1.15 on Dec 15, 2021 and 3.1.17 on Dec 21, 2021

more information, annoucement notes and download addresses:
viewforum.php?f=63&sid=e4254ea275cabd99ce6261227eb309a7

I have created 4 half-Chinese language pets each for easydunfell 3.1.11 to 3.1.17:

fcitx Chinese input platform: fcitx64_4.2.7-en-zh-raring-14.0.8.pet (12 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-raring-14.0.8.pet (31 mb)
scim Chinese input platform: scim64_1.4.14-en-zh-raring-14.0.8.pet (12 mb)
yong Chinese input platform: yong3264_20201122-en-zh-raring-14.0.8.pet (8 mb)

Please note that ibus Chinese input platform cannot input Chinese in Libreoffice 7 and seamonkey browser that comes with easyos dunfell 3.1.11. If you want to run a browser with ibus, please try light and palemoon (28.4.0).

Plus 2 Chinese language pets each for easydunfell 3.1.11 to 3.1.17:

Simplified Chinese:
easydunfell-3.1.17-zhcn-14.0.8.pet (3 mb)
easydunfell-3.1.15-zhcn-14.0.8.pet (3 mb)
easydunfell-3.1.13-zhcn-14.0.8.pet (3 mb)
easydunfell-3.1.11-zhcn-14.0.8.pet (3 mb)

Traditional Chinese:
easydunfell-3.1.17-zhhk-14.0.8.pet (3 mb)
easydunfell-3.1.15-zhhk-14.0.8.pet (3 mb)
easydunfell-3.1.13-zhhk-14.0.8.pet (3 mb)
easydunfell-3.1.11-zhhk-14.0.8.pet (3 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in easydunfell 3.1.11 to 3.1.17

(b) the 2 name+version number corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for easydunfell 3.1.11 to 3.1.17. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

more information about the fcitx, ibus, scim and yong pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

[icake]

wizard released Friendly-Fossa64 on Dec 9, 2021

Overall Objective - provide new users with a version that minimizes the frustration of adopting a new operating system.

Include these components:
-a simplified desktop
-a simplified taskbar
-a background and theme that presents both style and tech. First impressions count.
Taking a cue from Microsoft, their last three Windows, 8, 10, and 11 were released with
a blue abstract looking wallpaper/theme. Probably not an accident. They likely spent a lot of
money and their marketing research found that blue themes rated highest in overall acceptance.
-Mainstream browser, easily updateable Poor web function is a deal breaker
-a list on the desktop of many installed applications along with a short description of function
-a launcher directory, Mydesk, on the desktop, containing the most common tools and applications
-detailed local howto/tutorials for the most common setup/operating task facing a new user

Project considerations:
The .doc format was chosen for the tutorial/howto files since it would be the easiest to create, edit, maintain or adapt to other Puppys. Libre Write was used to create the originals. In practice they open in Abiword. Although Abiword is known to have issues, in this case it is only being used as a viewer.

The tutorials intent is not to make the user a Puppy expert. Not to bombard them with five ways to do everything, but to give them ONE way, hopefully easy, to do a common task.

more information: viewtopic.php?t=4681

download friendly-fossa64-rc1.iso: https://sourceforge.net/projects/friend ... o/download

I have created 3 half-Chinese language pets for Friendly-Fossa64:

fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-21.0.1s.pet (14 mb)
scim Chinese input platform: scim64_1.4.9-en-zh-bionic-21.0.1s.pet (16 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-21.0.1s.pet (8 mb)

Plus 4 Chinese language pets each for Friendly-Fossa64:
Simplified Chinese:
fossapup64-friendly-9.5.0-zhcn-21.0.1s.pet (4 mb)

Traditional Chinese:
fossapup64-friendly-9.5.0-zhhk-21.0.1s.pet (3 mb)

To use:
(a) any 1 of the 3 half-Chinese language pets will enable you to display and input Chinese in Friendly-Fossa64

(b) the name+version number corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for Friendly-Fossa64. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

for more information about the fcitx, scim and yong half-Chinese pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

[icake]

gilles released xenial 32 bits optimised for Asus EeePC 701SD / 4G on Dec 11, 2021

Key information:
32 bits Xenial isos optimized for Asus Eee PC 701 SD and 4G netbooks, and including libre office + slimjet browser which allows to eliminate ads, which is appreciable with computers with limited capacities.

isos will work fine on older computers, not just EeePCs. The only difference in installation is that you only need to enable panning (following the instructions provided) for computers with a resolution of 800x480

more information: viewtopic.php?p=44098#p44098

download xenialpup7.5EeePC701SD-32bits.iso (english): https://github.com/gilloraymondo/toutou ... Eeepc701SD

I have created 3 half-Chinese language pets each for xenial pup Dec 11, 2021 system:
fcitx Chinese input platform: fcitx_4.2.７-en-zh-xenial-16.0.1.pet (25 mb)

scim Chinese input platform: scim_1.4.14-en-zh-xenial-16.0.1.pet (22 mb)

yong Chinese input platform: yong3264_20201122-en-zh-xenial-16.0.1.pet (8 mb)

Plus 2 Chinese language pets each for xenial pup Dec 11, 2021 system:
Simplified Chinese: xenialpup-7.5.20211211-zhcn-16.0.1.pet (4 mb)

Traditional Chinese: xenialpup-7.5.20211211-zhhk-16.0.1.pet (3 mb)

To use:
(a) any 1 of the 3 half-Chinese language pets will enable you to display and input Chinese in xenial pup Dec 11, 2021 system

(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for xenial pup Dec 11, 2021 system. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

For more information about the fcitx, scim and yong half-Chinese language pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

[icake]

dimkr recently released Vanilla Dpup (x86 and x86_64) 9.0.18 (Dec 11, 2021) and 9.0.20 （Dec 25, 2021）

More information: viewtopic.php?t=4093

Download iso: https://github.com/vanilla-dpup/releases/releases

I have created 4 half-Chinese language pets each for x86 and x86_64 Vanilla Dpup 9.0.18 and 9.0.20:
fcitx Chinese input platform:
x86_64: fcitx64_4.2.7-en-zh-bionic-21.1.2a.pet (15 mb)
x86: fcitx_4.2.７-en-zh-bionic-20.1.1.pet (19 mb)

ibus Chinese input platform:
x86_64: ibus64_1.5.19-en-zh-bionic-21.1.2a.pet (33 mb)
x86: ibus_1.5.17-en-zh-raring-20.1.1.pet (34 mb)

scim Chinese input platform:
x86_64: scim64_1.4.14-en-zh-bionic-21.1.2a.pet (12 mb)
x86: scim_1.4.14-en-zh-raring-20.1.1.pet (13 mb)

yong Chinese input platform:
x86_64: yong3264_20201122-en-zh-bionic-21.1.2a.pet (8 mb)
x86: yong3264_20201122-en-zh-raring-20.1.1.pet (8 mb)

Plus 2 Chinese language pets each for x86 and x86_64 Vanilla Dpup 9.0.18 and 9.0.20:
Simplified Chinese:
x86_64:
vanilladpup64-9.0.20-zhcn-21.1.2a.pet (3 mb)
vanilladpup64-9.0.18-zhcn-21.1.2a.pet (3 mb)

x86:
vanilladpup-9.0.20-zhcn-20.1.1.pet (3 mb)
vanilladpup-9.0.18-zhcn-20.1.1.pet (3 mb)

Traditional Chinese:
x86_64:
vanilladpup64-9.0.20-zhhk-21.1.2a.pet (3 mb)
vanilladpup64-9.0.18-zhhk-21.1.2a.pet (3 mb)

x86
vanilladpup-9.0.20-zhhk-20.1.1.pet (2 mb)
vanilladpup-9.0.18-zhhk-20.1.1.pet (2 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in x86_64 Vanilla Dpup 9.0.18 and 9.0.20 （use 21.1.2a pets）and x86 Vanilla Dpup 9.0.18 and 9.0.20（use 20.1.1 pets）

(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for x86 and x86_64 Vanilla Dpup 9.0.18 and 9.0.20. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

For more information about the fcitx, ibus, scim and yong half-Chinese language pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

[icake]

mistfire has recently released QuickPup64 21.08 beta18 (Dec 5, 2021); QuickPup64 21.08 beta19 (Dec 23, 2021)

More information and forum discussions: viewtopic.php?f=33&t=3171&start=64

Download iso:
quickpup64_21.08-beta-19.iso: https://drive.google.com/file/d/1vKWbs- ... XkQiJ/edit
quickpup64_21.08-beta-18.iso: https://drive.google.com/file/d/1Q2CWX3 ... sp=sharing

I have created 4 half-Chinese language pets for QuickPup 21.08 beta18 and 19:

fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-21.2.5.pet (14 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.2.5.pet (33 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-21.2.5.pet (16 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-21.2.5.pet (8 mb)

Plus 4 Chinese language pets each for QuickPup64 21.08beta18 and 19:
Simplified Chinese:
quickpup64-21.08beta19-zhcn-21.2.5.pet (3 mb)
quickpup64-21.08beta18-zhcn-21.2.5.pet (3 mb)

Traditional Chinese:
quickpup64-21.08beta19-zhhk-21.2.5.pet (3 mb)
quickpup64-21.08beta18-zhhk-21.2.5.pet (3 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in QuickPup64 21.08beta18 and 19

(b) the name+version number corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for QuickPup64 21.08beta18 and 19. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

for more information about the fcitx, ibus, scim and yong half-Chinese pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

[liuzhaoyzz]

very good,thank you!

[icake]

peebee released VoidPup32 21.12Alpha 7 29-Dec-2021; 22.01beta1 2-Jan-2022; beta3 10-Jan-2022; beta5 23-Jan-2022; VoidPup64 22.01beta3 23-Jan-2022

more information: viewtopic.php?t=4741

download iso:
VoidPup64 22.01 beta 3 iso: https://sourceforge.net/projects/vpup/f ... up64/Beta/
VoidPup32 22.01 beta 0 to 5 iso: https://sourceforge.net/projects/vpup/f ... up32/Beta/
VoidPup32 21.12 Alpha+0.iso to +7.iso: https://sourceforge.net/p/vpup/activity ... e695261795

I have created 3 half-Chinese language pets for voidpup64 22.01.beta 3 and 4 half-Chinese language pets for voidpup32 21.12 alpha 7 to 22.01 beta 5:

voidpup64:
fcitx Chinese input platform: fcitx64_4.2.７-en-zh-bionic-21.0.3f.pet (12 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-21.0.3f.pet (12 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-21.0.3f.pet (8 mb)

voidpup32:
fcitx Chinese input platform: fcitx_4.2.9-en-zh-bionic-20.1.2.pet (22 mb)
ibus Chinese input platform: ibus_1.5.17-en-zh-bionic-20.1.2.pet (34 mb)
scim Chinese input platform: scim_1.4.18-en-zh-bionic-20.1.2.pet (15 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-20.1.2.pet (8 mb)

Plus 2 Chinese language pets each for voidpup64 22.01 beta 3 and voidpup32 21.12 alpha 7 to 22.01 beta 5:
voidpup64:
Simplified Chinese: void64-22.01beta3-zhcn-21.0.3f.pet (4 mb)
Traditional Chinese: void64-22.01beta3-zhhk-21.0.3f.pet (3 mb)

voidpup32:
Simplified Chinese:
void-22.01beta5-zhcn-20.1.2.pet (3 mb)
void-22.01beta3-zhcn-20.1.2.pet (3 mb)
void-22.01beta1-zhcn-20.1.2.pet (3 mb)
void-21.12alpha7-zhcn-20.1.2.pet (3 mb)

Traditional Chinese:
void-22.01beta5-zhhk-20.1.2.pet (3 mb)
void-22.01beta3-zhhk-20.1.2.pet (3 mb)
void-22.01beta1-zhhk-20.1.2.pet (3 mb)
void-21.12alpha7-zhhk-20.1.2.pet (3 mb)

To use:
(a) any 1 of the half-Chinese language pets will enable you to display and input Chinese in voidpup64 22.01 beta 3 (please use the 21.0.3f pets) and voidpup32 21.12 alpha 7 to 22.01 beta 5 (please use the 20.1.2 pets)

(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for voidpup64 22.01 beta 3 and voidpup32 21.12 alpha 7 to 22.01 beta 5. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

For more information about the fcitx, ibus, scim and yong half-Chinese language pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

[icake]

BarryK has released EasyOS Dunfell-series 3.1.19 on Jan 2, 2022; 3.2.0 on Jan 8, 2022; 3.2.1 on Jan 14, 2022

more information, annoucement notes and download addresses:
viewforum.php?f=63&sid=e4254ea275cabd99ce6261227eb309a7

I have created 4 half-Chinese language pets each for easydunfell 3.1.19 to 3.2.1:

fcitx Chinese input platform: fcitx64_4.2.7-en-zh-raring-14.0.8.pet (12 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-raring-14.0.8.pet (31 mb)
scim Chinese input platform: scim64_1.4.14-en-zh-raring-14.0.8.pet (12 mb)
yong Chinese input platform: yong3264_20201122-en-zh-raring-14.0.8.pet (8 mb)

Please note that ibus Chinese input platform cannot input Chinese in Libreoffice 7 and seamonkey browser that comes with easyos dunfell 3.1.19 to 3.2.1. If you want to run a browser with ibus, please try light and palemoon (28.4.0).

Plus 2 Chinese language pets each for easydunfell 3.1.19 to 3.2.1:

Simplified Chinese:
easydunfell-3.2.1-zhcn-14.0.8.pet (3 mb)
easydunfell-3.2.0-zhcn-14.0.8.pet (3 mb)
easydunfell-3.1.19-zhcn-14.0.8.pet (3 mb)

Traditional Chinese:
easydunfell-3.2.1-zhhk-14.0.8.pet (3 mb)
easydunfell-3.2.0-zhhk-14.0.8.pet (3 mb)
easydunfell-3.1.19-zhhk-14.0.8.pet (3 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in easydunfell 3.1.19 to 3.2.1

(b) the 2 name+version number corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for easydunfell 3.1.19 to 3.2.1. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

more information about the fcitx, ibus, scim and yong pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

[icake]

dimkr recently released Vanilla Dpup (x86 and x86_64) 9.0.23 (Jan 7, 2022); 9.0.25 (x86 and x86_64) (Jan 22, 2022); x86_64 9.1.1 and 9.1.2 (Jan 24, 2022)

More information: viewtopic.php?t=4093

Download iso: https://github.com/vanilla-dpup/releases/releases

I have created 4 half-Chinese language pets each for x86_64 Vanilla Dpup 9.0.23 to 9.1.2; and x86 Vanilla Dpup 9.0.23 to 9.0.25:
x86_64:
fcitx Chinese input platform: fcitx64_4.2.7-en-zh-bionic-21.1.2a.pet (15 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.1.2a.pet (33 mb)
scim Chinese input platform: scim64_1.4.14-en-zh-bionic-21.1.2a.pet (12 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-21.1.2a.pet (8 mb)

x86:
fcitx Chinese input platform: fcitx_4.2.７-en-zh-bionic-20.1.1.pet (19 mb)
ibus Chinese input platform: ibus_1.5.17-en-zh-raring-20.1.1.pet (34 mb)
scim Chinese input platform: scim_1.4.14-en-zh-raring-20.1.1.pet (13 mb)
yong Chinese input platform: yong3264_20201122-en-zh-raring-20.1.1.pet (8 mb)

Plus 2 Chinese language pets each for x86_64 Vanilla Dpup 9.0.23 to 9.1.2; and x86 Vanilla Dpup 9.0.23 to 9.0.25:
x86_64:
Simplified Chinese:
vanilladpup64-9.1.2-zhcn-21.1.2a.pet (3 mb)
vanilladpup64-9.1.1-zhcn-21.1.2a.pet (3 mb)
vanilladpup64-9.0.25-zhcn-21.1.2a.pet (3 mb)
vanilladpup64-9.0.23-zhcn-21.1.2a.pet (3 mb)

Traditional Chinese:
vanilladpup64-9.1.2-zhhk-21.1.2a.pet (3 mb)
vanilladpup64-9.1.1-zhhk-21.1.2a.pet (3 mb)
vanilladpup64-9.0.25-zhhk-21.1.2a.pet (3 mb)
vanilladpup64-9.0.23-zhhk-21.1.2a.pet (3 mb)

x86:
Simplified Chinese:
vanilladpup-9.0.25-zhcn-20.1.1.pet (3 mb)
vanilladpup-9.0.23-zhcn-20.1.1.pet (3 mb)

Traditional Chinese:
vanilladpup-9.0.25-zhhk-20.1.1.pet (2 mb)
vanilladpup-9.0.23-zhhk-20.1.1.pet (2 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in x86_64 Vanilla Dpup 9.0.23 to 9.1.2（use 21.1.2a pets）and x86 Vanilla Dpup 9.0.23 to 25（use 20.1.1 pets）

(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for x86_64 Vanilla Dpup 9.0.23 to 9.1.2 and x86 Vanilla Dpup 9.0.23 to 25. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

For more information about the fcitx, ibus, scim and yong half-Chinese language pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

[icake]

mistfire has recently released QuickPup64 21.08 beta20 (Dec 29, 2021); QuickPup64 22.01 beta1 (Jan 2, 2022); QuickPup64 22.01 beta2 (Jan 6, 2022); QuickPup64 22.01 beta4 (Jan 22, 2022)

More information and forum discussions: viewtopic.php?f=33&t=3171&start=64

Download iso:
quickpup64_22.01-beta-4.iso: https://drive.google.com/file/d/1bVSgD4 ... -ja5_/view
quickpup64_22.01-beta-2.iso: https://drive.google.com/file/d/1c36KBx ... sp=sharing
quickpup64_22.01-beta-1.iso: https://drive.google.com/file/d/1iBDC6l ... sp=sharing
quickpup64_21.08-beta-20.iso: https://drive.google.com/file/d/1LnvFHD ... sp=sharing

I have created 4 half-Chinese language pets for QuickPup 21.08 beta20 to 22.01 beta4:

fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-21.2.5.pet (14 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.2.5.pet (33 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-21.2.5.pet (16 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-21.2.5.pet (8 mb)

Plus 4 Chinese language pets each for QuickPup64 21.08beta20 to 22.01 beta4:
Simplified Chinese:
quickpup64-22.01beta4-zhcn-21.2.5.pet (3 mb)
quickpup64-22.01beta2-zhcn-21.2.5.pet (3 mb)
quickpup64-22.01beta1-zhcn-21.2.5.pet (3 mb)
quickpup64-21.08beta20-zhcn-21.2.5.pet (3 mb)

Traditional Chinese:
quickpup64-22.01beta4-zhhk-21.2.5.pet (3 mb)
quickpup64-22.01beta2-zhhk-21.2.5.pet (3 mb)
quickpup64-22.01beta1-zhhk-21.2.5.pet (3 mb)
quickpup64-21.08beta20-zhhk-21.2.5.pet (3 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in QuickPup64 21.08beta20 to 22.01 beta4

(b) the name+version number corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use

zhhk pets) desktop menus, icon labels, tooltips for QuickPup64 21.08beta20 to 22.01 beta4. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

for more information about the fcitx, ibus, scim and yong half-Chinese pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.