icake Chinese language pets

[icake]

mistfire has recently released QuickPup64 22.01 beta27 on Nov 6, 2022

More information and forum discussions: https://forum.puppylinux.com/viewtopic.php?t=3171

Download iso: https://drive.google.com/file/d/1bG1zV3 ... WlWPoGVvAA

I have created 6 half-Chinese language pets for QuickPup 22.01 beta27:
fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-21.3.5.pet (23 mb)
gcin Chinese input platform: gcin64_2.9.0-en-zh-bionic-21.3.5.pet (5 mb)
hime Chinese input platform: himg64_0.9.11-en-zh-bionic-21.3.5.pet (5 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.3.5.pet (55 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-21.3.5.pet (10 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-21.3.5.pet (10 mb)

Plus 4 Chinese language pets each for QuickPup 22.01 beta27:
Simplified Chinese: quickpup64-22.01beta27-zhcn-21.3.5.pet (3 mb)
Traditional Chinese: quickpup64-22.01beta27-zhhk-21.3.5.pet (3 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in QuickPup 22.01 beta27

(b) the name+version number corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for QuickPup 22.01 beta27. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

for more information about the fcitx, gcin, hime, ibus, scim and yong half-Chinese pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

[icake]

mikesir released Tahrpup64_6.0.7 on Nov 11, 2022

more information and discussions: viewtopic.php?t=7316

download tahrpup64_6.0.7.iso (587 mb): https://www.mediafire.com/folder/7yxedk ... up64-6.0.7

I have created 3 half-Chinese language pets for Tahrpup64_6.0.7:
fcitx Chinese input platform: fcitx64_4.2.7-en-zh-raring-13.5.0.pet (14 mb)
scim Chinese input platform: scim64_1.4.14-en-zh-raring-13.5.0.pet (9 mb)
yong Chinese input platform: yong64_2.5.0-en-zh-raring-13.5.0.pet (10 mb)

Plus 2 Chinese language pets each for Tahrpup64_6.0.7:
Simplified Chinese: tahrpup64-6.0.7-zhcn-13.5.0.pet (5 mb)
Traditional Chinese: tahrpup64-6.0.7-zhhk-13.5.0.pet (4 mb)

To use:
(a) any 1 of the 3 half-Chinese language pets will enable you to display and input Chinese in Tahrpup64_6.0.7

(b) the name+version number corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for Tahrpup64_6.0.7. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

for more information about the fcitx, scim and yong half-Chinese pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

[icake]

peebee released VoidPup32 22.02+11 and VoidPup64 22.02+11 on Nov 19, 2022

more information: viewtopic.php?t=5270

download iso:
VoidPup64 22.02+11 iso: https://sourceforge.net/projects/vpup/files/VoidPup64
VoidPup32 22.02+11 iso: https://sourceforge.net/projects/vpup/files/VoidPup32/

I have created 5 half-Chinese language pets for voidpup64 22.02+10 and 6 half-Chinese language pets for voidpup32 22.02+11:
voidpup64:
fcitx Chinese input platform: fcitx64_4.2.7-en-zh-bionic-21.0.4.pet (17 mb)
gcin Chinese input platform: gcin64_2.9.0-en-zh-bionic-21.0.4.pet (9 mb)
hime Chinese input platform: hime64_0.9.11-en-zh-bionic-21.0.4.pet (5 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-21.0.4.pet (14 mb)
yong Chinese input platform: yong64_2.5.0-en-zh-bionic-21.0.4.pet (10 mb)

voidpup32:
fcitx Chinese input platform: fcitx_4.2.9-en-zh-bionic-20.2.9.pet (26 mb)
gcin Chinese input platform: gcin32_2.9.0-en-zh-bionic-20.2.9.pet (20 mb)
hime Chinese input platform: hime32_0.9.11-en-zh-bionic-20.2.9.pet (18 mb)
ibus Chinese input platform: ibus_1.5.17-en-zh-bionic-20.2.9.pet (38 mb)
scim Chinese input platform: scim_1.4.18-en-zh-bionic-20.2.9.pet (17 mb)
yong Chinese input platform: yong32_2.5.0-en-zh-bionic-20.2.9.pet (10 mb)

Plus 2 Chinese language pets each for voidpup64 22.02+11 and voidpup32 22.02+11:
voidpup64:
Simplified Chinese: void64-22.02.11-zhcn-21.0.4.pet (4 mb)
Traditional Chinese: void64-22.02.11-zhhk-21.0.4.pet (3 mb)

voidpup32:
Simplified Chinese: void-22.02.11-zhcn-20.2.9.pet (4 mb)
Traditional Chinese: void-22.02.11-zhhk-20.2.9.pet (3 mb)

To use:
(a) any 1 of the half-Chinese language pets will enable you to display and input Chinese in voidpup64 22.02+11 (please use the 21.0.4 pets) and voidpup32 22.02+11 (please use the 20.2.9 pets)

(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for voidpup64 22.02+11 and voidpup32 22.02+11. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

For more information about the fcitx, ibus, gcin, hime, scim and yong half-Chinese language pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

[icake]

peebee released KineticPup32 22.10+1 on Nov 14, 2022

more information and discussions: viewtopic.php?p=69987

download KineticPup32-22.10+1.iso: https://sourceforge.net/projects/zestyp ... inetic%2B/

I have created 6 half-Chinese language pets each for KineticPup32 22.10+1:
fcitx Chinese input platform: fcitx32_4.2.9-en-zh-bionic-20.5.0.pet (26 mb)
gcin Chinese input platform: gcin32_2.9.0-en-zh-bionic-20.5.0.pet (6 mb)
hime Chinese input platform: hime32_0.9.11-en-zh-bionic-20.5.0.pet (6 mb)
ibus Chinese input platform: ibus32_1.5.17-en-zh-bionic-20.5.0.pet (49 mb)
scim Chinese input platform: scim32_1.4.18-en-zh-bionic-20.5.0.pet (15 mb)
yong Chinese input platform: yong32_2.5.0-en-zh-bionic-20.5.0.pet (10 mb)

Plus 2 Chinese language pets for KineticPup32 22.10+1:
Simplified Chinese: kineticpup-22.10.01-zhcn-20.5.0.pet (4 mb)
Traditional Chinese: kineticpup-22.10.01-zhhk-20.5.0.pet (3 mb)

To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in KineticPup32 22.10+1

(b) the name+version number corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for KineticPup32 22.10+1. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

for more information about the fcitx, gcin, hime, ibus, scim and yong pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

[icake]

dimkr released Vanilla Dpup x86_64 9.2.23, 9.2.26, 9.3.0 beta2 and 10.0.118xorg

more information: https://forum.puppylinux.com/viewtopic.php?t=7420

download isoes: [/url]https://vanilla-dpup.github.io[/url]

I have created 6 half-Chinese language pets for Vanilla Dpup x86_64 9.2.23, 9.2.26, 9.3.0 beta2:
fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-21.2.2.pet (19 mb)
gcin Chinese input platform: gcin64_2.8.2-en-zh-bionic-21.2.2.pet (5 mb)
hime Chinese input platform: hime64_0.9.11-en-zh-bionic-21.2.2.pet (5 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.2.2.pet (36 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-21.2.2.pet (14 mb)
yong Chinese input platform: yong64_2.5.0-en-zh-bionic-21.2.2.pet (10 mb)

and for Vanilla Dpup x86_64 10.0.118org:
fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-21.5.1.pet (19 mb)
gcin Chinese input platform: gcin64_2.8.2-en-zh-bionic-21.5.1.pet (5 mb)
hime Chinese input platform: hime64_0.9.11-en-zh-bionic-21.5.1.pet (5 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.5.1.pet (39 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-21.5.1.pet (14 mb)
yong Chinese input platform: yong64_2.5.0-en-zh-bionic-21.5.1.pet (10 mb)

Plus 2 Chinese language pets each for x86_64 Vanilla Dpup 9.2.23 to 10.0.118xorg:
Simplified Chinese:
vanilladpup64-9.2.23-zhcn-21.2.2.pet (3 mb)
vanilladpup64-9.2.26-zhcn-21.2.2.pet (3 mb)
vanilladpup64-9.3.0beta-zhcn-21.2.2.pet (3 mb)
vanilladpup64-10.0.118org-zhcn-21.5.1.pet (3 mb)

Traditional Chinese:
vanilladpup64-9.2.23-zhhk-21.2.2.pet (3 mb)
vanilladpup64-9.2.26-zhhk-21.2.2.pet (3 mb)
vanilladpup64-9.3.0beta2-zhhk-21.2.2.pet (3 mb)
vanilladpup64-10.0.118org-zhhk-21.5.1.pet (3 mb)

To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in x86_64 Vanilla Dpup 9.2.23 to 10.0.118xorg

(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for x86_64 9.2.23 to 10.0.118xorg. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

For more information about the fcitx, gcin, hime, ibus, scim and yong half-Chinese language pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

[icake]

dimkr released Vanilla Dpup 9.2.23, 9.2.26, 9.3.0 beta2 and 10.0.118retro

more information: viewtopic.php?t=7420

download iso: [/url]https://vanilla-dpup.github.io[/url]

I have created 6 half-Chinese language pets each for Vanilla Dpup 9.2.23, 9.2.26, 9.3.0 beta2 and 10.0.118retro:
fcitx Chinese input platform: fcitx32_4.2.9-en-zh-bionic-20.2.2.pet (22 mb)
gcin Chinese input platform: gcin32_2.8.2-en-zh-bionic-20.2.2.pet (5 mb)
hime Chinese input platform: hime32_0.9.11-en-zh-bionic-20.2.2.pet (5 mb)
ibus Chinese input platform: ibus32_1.5.17-en-zh-bionic-20.2.2.pet (46 mb)
scim Chinese input platform: scim32_1.4.18-en-zh-bionic-20.2.2.pet (13 mb)
yong Chinese input platform: yong32_2.5.0-en-zh-bionic-20.2.2.pet (9 mb)

Plus 2 Chinese language pets each for Vanilla Dpup 9.2.23, 9.2.26, 9.3.0 beta2 and 10.0.118retro:
Simplified Chinese:
vanilladpup-9.2.23-zhcn-20.2.2.pet (3 mb)
vanilladpup-9.2.26-zhcn-20.2.2.pet (3 mb)
vanilladpup-9.3.0beta2-zhcn-20.2.2.pet (3 mb)
vanilladpup-10.0.118retro-zhcn-20.2.2.pet (3 mb)

Traditional Chinese:
vanilladpup-9.2.23-zhhk-20.2.2.pet (3 mb)
vanilladpup-9.2.26-zhhk-20.2.2.pet (3 mb)
vanilladpup-9.3.0beta2-zhhk-20.2.2.pet (3 mb)
vanilladpup-10.0.118retro-zhhk-20.2.2.pet (3 mb)

To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in x86_64 Vanilla Dpup 9.2.23, 9.2.26, 9.3.0 beta2 and 10.0.118retro

(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for x86_64 Vanilla Dpup 9.2.23, 9.2.26, 9.3.0 beta2 and 10.0.118retro. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

For more information about the fcitx, gcin, hime, ibus, scim and yong half-Chinese language pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

[icake]

rockedge released F96_4-CE on Nov 19, 2022

more information and discussions: viewtopic.php?t=7387

download F96_4-CE (475 mb): https://rockedge.org/kernels/data/ISO/F ... 6_4-CE.iso

I have created 5 half-Chinese language pets for F96_4-CE:
gcin Chinese input platform: gcin64_2.9.0-en-zh-bionic-21.0.6.pet (5 mb)
hime Chinese input platform: hime64_0.9.11-en-zh-bionic-21.0.6.pet (5 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.0.6.pet (42 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-21.0.6.pet (13 mb)
yong Chinese input platform: yong64_2.5.0-en-zh-bionic-21.0.6.pet (10 mb)

Plus 2 Chinese language pets each for F96_4-CE:
Simplified Chinese: F96_4CE-zhcn-21.0.6.pet (4 mb)
Traditional Chinese: F96_4CE-zhhk-21.0.6.pet (3 mb)

To use:
(a) any 1 of the 5 half-Chinese language pets will enable you to display and input Chinese in F96_4-CE

(b) the 2 name+version number corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for F96_4-CE. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

more information about the fcitx, gcin, hime, ibus, scim and yong pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

[icake]

peebee released S15Pup-22.12 64 and 32 bit on Dec 1, 2022 and S15Pup-22.12+1 on Dec 3, 2022

more information and discussions: viewtopic.php?t=7464

download isoes:
S15Pup64: https://sourceforge.net/projects/spup/files/S15Pup64/
S15Pup32: https://sourceforge.net/projects/spup/files/S15Pup32/

I have created 6 half-Chinese language pets for:
32 bit S15Pup32-22.12+0 and +1.iso:
fcitx Chinese input platform: fcitx_4.2.7-en-zh-raring-14.3.9.pet (19 mb)
gcin Chinese input platform: gcin32_2.9.0-en-zh-raring-14.3.9.pet (20 mb)
hime Chinese input platform: hime32_0.9.11-en-zh-raring-14.3.9.pet (18 mb)
ibus Chinese input platform: ibus32_1.5.19-en-zh-raring-14.3.9.pet (39 mb)
scim Chinese input platform: scim_1.4.14-en-zh-raring-14.3.9.pet (14 mb)
yong Chinese input platform: yong32_2.5.0-en-zh-raring-14.3.9.pet (10 mb)

and for 64 bit S15Pup64-22.12+0 and +1.iso
fcitx Chinese input platform: fcitx64_4.2.7-en-zh-raring-14.0.9.pet (16 mb)
gcin Chinese input platform: gcin64_2.8.2-en-zh-raring-14.0.9.pet (7 mb)
hime Chinese input platform: hime64_0.9.11-en-zh-raring-14.0.9.pet (5 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-raring-14.0.9.pet (53 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-raring-14.0.9.pet (13 mb)
yong Chinese input platform: yong64_2.5.0-en-zh-raring-14.0.9.pet (10 mb)

Plus 2 Chinese language pets each for S15Pup32-22.12.00 and 01, and S15Pup64-22.12.00 and 01:
Simplified Chinese:
s15pup32-22.12.00T-zhcn-14.3.9.pet (4 mb)
s15pup32-22.12.01T-zhcn-14.3.9.pet (4 mb)
s15pup64-22.12.00T-zhcn-14.0.9.pet (4 mb)
s15pup64-22.12.01T-zhcn-14.0.9.pet (4 mb)

Traditional Chinese:
s15pup32-22.12.00T-zhhk-14.3.9.pet (3 mb)
s15pup32-22.12.01T-zhhk-14.3.9.pet (3 mb)
s15pup64-22.12.00T-zhhk-14.0.9.pet (3 mb)
s15pup64-22.12.01T-zhhk-14.0.9.pet (3 mb)

To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in s15pup32-22.12 and 22.12+1 (use the 14.3.9 pets) and s15pup64-22.12 and 22.12+1 (use the 14.0.9 pets)

(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for S15Pup32-22.12 and 22.12+1, and S15Pup64-22.12 and 22.12+1. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

For more information about the fcitx, gcin, hime, ibus, scim and yong half-Chinese language pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

[icake]

BarryK has recently released EasyOS Dunfell-series 64 bit 4.5.1 and 4.5.2

more information and annoucement notes: viewforum.php?f=63

download addresses:
4.5.2: https://distro.ibiblio.org/easyos/amd64 ... 022/4.5.2/
4.5.1: https://distro.ibiblio.org/easyos/amd64 ... 022/4.5.1/

I have created these icake Chinese language pets for easydunfell 4.5.1 and 4.5.2:
(A) 6 half-Chinese pets:
fcitx Chinese input platform: fcitx64_4.2.7-en-zh-bionic-21.2.7.pet (14 mb)
gcin Chinese input platform: gcin64_2.9.0-en-zh-bionic-21.2.7.pet (9 mb)
hime Chinese input platform: hime64_0.9.11-en-zh-bionic-21.2.7.pet (6 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.2.7.pet (35 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-21.2.7.pet (10 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-21.2.7.pet (9 mb)

Please note that 64 bit ibus Chinese input platform cannot input Chinese in Libreoffice 7 and seamonkey browser that comes with easyos dunfell 4.5.1 and 4.5.2. If you want to run a browser with 64 bit ibus, please try light and palemoon (28.4.0).

(B) 2 Chinese language pets each for easydunfell 4.5.1 and 4.5.2:
Simplified Chinese:
easydunfell-4.5.2-zhcn-21.2.7.pet (4 mb)
easydunfell-4.5.1-zhcn-21.2.7.pet (4 mb)

Traditional Chinese:
easydunfell-4.5.2-zhhk-21.2.7.pet (3 mb)
easydunfell-4.5.1-zhhk-21.2.7.pet (3 mb)

To use:
(a) any 1 of the half-Chinese language pets will enable you to display and input Chinese in easydunfell 4.5.1 and 4.5.2(b) the 2 name+version number corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for easydunfell 4.5.1 and 4.5.2. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

more information about the fcitx, gcin, hime, ibus, scim and yong pets, please see the first posting of this subject All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

[icake]

peebee released VoidPup32 22.02+12 and VoidPup64 22.02+12 on Dec 4, 2022

more information: viewtopic.php?t=5270

download iso:
VoidPup64 22.02+12 iso: https://sourceforge.net/projects/vpup/files/VoidPup64
VoidPup32 22.02+12 iso: https://sourceforge.net/projects/vpup/files/VoidPup32/

I have created 6 half-Chinese language pets for voidpup64 22.02+10 and 6 half-Chinese language pets for voidpup32 22.02+12:
voidpup64:
fcitx Chinese input platform: fcitx64_4.2.7-en-zh-bionic-21.0.4.pet (17 mb)
gcin Chinese input platform: gcin64_2.9.0-en-zh-bionic-21.0.4.pet (9 mb)
hime Chinese input platform: hime64_0.9.11-en-zh-bionic-21.0.4.pet (5 mb)
ibus64 Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.0.4.pet (53 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-21.0.4.pet (14 mb)
yong Chinese input platform: yong64_2.5.0-en-zh-bionic-21.0.4.pet (10 mb)

voidpup32:
fcitx Chinese input platform: fcitx_4.2.9-en-zh-bionic-20.2.9.pet (26 mb)
gcin Chinese input platform: gcin32_2.9.0-en-zh-bionic-20.2.9.pet (20 mb)
hime Chinese input platform: hime32_0.9.11-en-zh-bionic-20.2.9.pet (18 mb)
ibus Chinese input platform: ibus_1.5.17-en-zh-bionic-20.2.9.pet (38 mb)
scim Chinese input platform: scim_1.4.18-en-zh-bionic-20.2.9.pet (17 mb)
yong Chinese input platform: yong32_2.5.0-en-zh-bionic-20.2.9.pet (10 mb)

Plus 2 Chinese language pets each for voidpup64 22.02+12 and voidpup32 22.02+12:
voidpup64:
Simplified Chinese: void64-22.02.12-zhcn-21.0.4.pet (4 mb)
Traditional Chinese: void64-22.02.12-zhhk-21.0.4.pet (3 mb)

voidpup32:
Simplified Chinese: void-22.02.12-zhcn-20.2.9.pet (4 mb)
Traditional Chinese: void-22.02.12-zhhk-20.2.9.pet (3 mb)

To use:
(a) any 1 of the half-Chinese language pets will enable you to display and input Chinese in voidpup64 22.02+12 (please use the 21.0.4 pets) and voidpup32 22.02+12 (please use the 20.2.9 pets)

(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for voidpup64 22.02+12 and voidpup32 22.02+12. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

For more information about the fcitx, ibus, gcin, hime, scim and yong half-Chinese language pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

[icake]

mistfire has recently released QuickPup64 22.01 beta28 on Dec 4, 2022 and beta28b on Dec 5, 2022

More information and forum discussions: https://forum.puppylinux.com/viewtopic.php?t=3171

Download iso: https://drive.google.com/file/d/1r-7lpY ... wsn-R9PfWF

I have created 6 half-Chinese language pets for QuickPup 22.01 beta28 and beta28b:
fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-21.3.5.pet (23 mb)
gcin Chinese input platform: gcin64_2.9.0-en-zh-bionic-21.3.5.pet (5 mb)
hime Chinese input platform: himg64_0.9.11-en-zh-bionic-21.3.5.pet (5 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.3.5.pet (55 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-21.3.5.pet (10 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-21.3.5.pet (10 mb)

Plus 4 Chinese language pets each for QuickPup 22.01 beta28 and beta28b:
Simplified Chinese:
quickpup64-22.01beta28b-zhcn-21.3.5.pet (3 mb)
quickpup64-22.01beta28-zhcn-21.3.5.pet (3 mb)

Traditional Chinese:
quickpup64-22.01beta28b-zhhk-21.3.5.pet (3 mb)
quickpup64-22.01beta28-zhhk-21.3.5.pet (3 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in QuickPup 22.01 beta28 and beta28b

(b) the name+version number corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for QuickPup 22.01 beta28 and beta28b. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

for more information about the fcitx, gcin, hime, ibus, scim and yong half-Chinese pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

[icake]

peebee recently released LxPupSc64-22.02+4-T and LxPupSc32-22.02+4-T-k64 （Aug 6, 2022）； interim LxPupSc32-22.02+5-T-k64 delta to +5-T-k64 （ Nov 26, 2022）； interim LxPupSc64-22.02+4-T delta to +5-T （Nov 28, 2022）

more information:
LxPupSc64-22.02+4-T: viewtopic.php?f=121&t=167
LxPupSc32-22.02+4-T: viewtopic.php?t=166

download iso:
LxPupSc64-22.02+4-T and +5-T delta:
http://www.smokey01.com/peebee/LxPupSc64-22.02.htm
https://sourceforge.net/projects/lxpup/ ... LxPupSc64/
delta: https://sourceforge.net/projects/lxpup/ ... 4/updates/

LxPupSc32-22.02+4-T-k64 and +5-T-k64:
http://www.smokey01.com/peebee/LxPupSc32-22.02.htm
https://sourceforge.net/projects/lxpup/ ... r/LxPupSc/
delta: https://sourceforge.net/projects/lxpup/ ... c/updates/

I have created 6 half-Chinese language pets for LxPupSc64-22.02+4-T; +5-T and 6 half-Chinese language pets for LxPupSc32-22.02+4-T-k64, +5-T-k64:
LxPupSc64-22.02+4-T and +5-T:
fcitx Chinese input platform: fcitx64_4.2.7-en-zh-bionic-21.1.8.pet (17 mb)
gcin Chinese input platform: gcin64_2.8.2-en-zh-bionic-21.1.8.pet (7 mb)
hime Chinese input platform: hime64_0.9.11-en-zh-bionic-21.1.8.pet (6 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.1.8.pet (55 mb)
scim Chinese input platform: scim64_1.4.14-en-zh-bionic-21.1.8.pet (17 mb)
yong Chinese input platform: yong64_2.5.0-en-zh-bionic-21.1.8.pet (10 mb)

LxPupSc32-22.02+4-T-k64 and +5-T-k64:
fcitx Chinese input platform: fcitx32_4.2.7-en-zh-raring-14.2.9.pet (21 mb)
gcin Chinese input platform: gcin32_2.8.2-en-zh-raring-14.2.9.pet (10 mb)
hime Chinese input platform: hime32_0.9.11-en-zh-raring-14.2.9.pet (17 mb)
ibus Chinese input platform: ibus32_1.5.17-en-zh-raring-14.2.9.pet (38 mb)
scim Chinese input platform: scim32_1.4.14-en-zh-raring-14.2.9.pet (15 mb)
yong Chinese input platform: yong32_2.5.0-en-zh-raring-14.2.9.pet (10 mb)

Plus 2 Chinese language pets each for LxPupSc64-22.02+4-T; +5-T and LxPupSc32-22.02+4-T-k64; +5-T-k64:
Simplified Chinese:
lxpupsc64-22.02.05T-zhcn-21.1.8.pet (4 mb)
lxpupsc64-22.02.04T-zhcn-21.1.8.pet (4 mb)
lxpupsc-22.02.05Tk64-zhcn-14.2.9.pet (4 mb)
lxpupsc-22.02.04Tk64-zhcn-14.2.9.pet (4 mb)

Traditional Chinese:
lxpupsc64-22.02.05T-zhhk-21.1.8.pet (3 mb)
lxpupsc64-22.02.04T-zhhk-21.1.8.pet (3 mb)
lxpupsc-22.02.05Tk64-zhhk-14.2.9.pet (3 mb)
lxpupsc-22.02.04Tk64-zhhk-14.2.9.pet (3 mb)

To use:
(a) any 1 of the half-Chinese language pets will enable you to display and input Chinese in LxPupSc64-22.02+4-T; +5-T (please use the 21.1.8 pets) and LxPupSc32-22.02+4-T-k64; +5-T-k64 (please use the 14.2.9 pets)

(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for LxPupSc64-22.02+4-T; +5-T and LxPupSc32-22.02+4-T-k64; +5-T-k64. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

For more information about the fcitx, ibus, gcin, hime, scim and yong half-Chinese language pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

[icake]

Triton-8.0 was released by petihar on Jan 8, 2023

more information and discussions: https://forum.puppylinux.com/viewtopic.php?t=7758

download Triton-8.0-uefi.iso (472 mb): https://sourceforge.net/projects/triton-8-0/

A. icake Chinese pets
I have created 6 half-Chinese language pets for Triton-8.0:
fcitx Chinese input platform: fcitx32_4.2.7-en-zh-raring-14.2.10.pet (21 mb)
gcin Chinese input platform: gcin32_2.8.2-en-zh-raring-14.2.10.pet (20 mb)
hime Chinese input platform: hime32_0.9.11-en-zh-raring-14.2.10.pet (17 mb)
ibus Chinese input platform: ibus32_1.5.17-en-zh-raring-14.2.10.pet (36 mb)
scim Chinese input platform: scim32_1.4.14-en-zh-raring-14.2.10.pet (15 mb)
yong Chinese input platform: yong32_2.5.0-en-zh-raring-14.2.10.pet (10 mb)

Plus 2 Chinese language pets each for Triton-8.0:
Simplified Chinese: triton-8.0.0-zhcn-14.2.10.pet (4 mb)
Traditional Chinese: triton-8.0.0-zhhk-14.2.10.pet (3 mb)

To use:
(a) any 1 of the half-Chinese language pets will enable you to display and input Chinese in Triton-8.0

(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for Triton-8.0. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

For more information about the fcitx, ibus, gcin, hime, scim and yong half-Chinese language pets, please see the first posting of this subject.

B. icake combo iso
I have also installed suitable icake Chinese language pets and remastered 2 combo live cds with multi Chinese input platforms:
icake32-Triton-8.0-uefi-est-fghisy.iso
icake32lo628-Triton-8.0-uefi-est-fghisy.iso

All these combo live cds, half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

[icake]

8Geee released atomicpup-23 on Jan 13, 2023

more information and discussions: https://forum.puppylinux.com/viewtopic.php?t=6212

download AtomicPup-23.iso (345 mb): https://archive.org/details/AtomicPup-23

I have created 6 half-Chinese language pets for atomicpup-23:
fcitx Chinese input platform: fcitx32_4.2.7-en-zh-raring-14.2.9.pet (21 mb)
gcin Chinese input platform: gcin32_2.8.2-en-zh-raring-14.2.9.pet (10 mb)
hime Chinese input platform: hime32_0.9.11-en-zh-raring-14.2.9.pet (17 mb)
ibus Chinese input platform: ibus32_1.5.17-en-zh-raring-14.2.9.pet (38 mb)
scim Chinese input platform: scim32_1.4.14-en-zh-raring-14.2.9.pet (15 mb)
yong Chinese input platform: yong32_2.5.0-en-zh-raring-14.2.9.pet (10 mb)

Plus 2 Chinese language pets each for atomicpup-23:
Simplified Chinese: atomicpup-23-zhcn-14.2.9.pet (4 mb)
Traditional Chinese: atomicpup-23-zhhk-14.2.9.pet (3 mb)

To use:
(a) any 1 of the half-Chinese language pets will enable you to display and input Chinese in atomicpup-23

(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for atomicpup-23. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

For more information about the fcitx, ibus, gcin, hime, scim and yong half-Chinese language pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

[icake]

peebee released bionicpup32ng-8.1+1 on Dec 29, 2022

more information and discussions: https://forum.puppylinux.com/viewtopic.php?t=7694

download bionicpup32ng-8.1+1.iso (328 mb): https://sourceforge.net/projects/zestyp ... -BionicNG/

A. icake Chinese pets
I have created 6 half-Chinese language pets for bionicpup32ng-8.1+1:
fcitx Chinese input platform: fcitx32_4.2.7-en-zh-bionic-20.0.2.pet (28 mb)
gcin Chinese input platform: gcin32_2.8.2-en-zh-bionic-20.0.2.pet (5 mb)
hime Chinese input platform: hime32_0.9.11-en-zh-bionic-20.0.2.pet (5 mb)
ibus Chinese input platform: ibus32_1.5.17-en-zh-bionic-20.0.2.pet (33 mb)
scim Chinese input platform: scim32_1.4.14-en-zh-bionic-20.0.2.pet (16 mb)
yong Chinese input platform: yong32_2.5.0-en-zh-bionic-20.0.2.pet (10 mb)

Plus 2 Chinese language pets each for bionicpup32ng-8.1+1:
Simplified Chinese: bionicpup32ng-8.1.1-zhcn-20.0.2.pet (4 mb)
Traditional Chinese: bionicpup32ng-8.1.1-zhhk-20.0.2.pet (3 mb)

To use:
(a) any 1 of the half-Chinese language pets will enable you to display and input Chinese in bionicpup32ng-8.1+1

(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for bionicpup32ng-8.1+1. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

For more information about the fcitx, ibus, gcin, hime, scim and yong half-Chinese language pets, please see the first posting of this subject

B. icake combo iso
I have also installed suitable icake Chinese language pets to bionicpup32ng-8.1+1 and remastered 2 combo live cds with multi Chinese input platforms:
icake32-bionicpup32ng-8.1+1-est-fghisy.iso
icake32lo628-bionicpup32ng-8.1+1-est-fghisy.iso

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

[icake]

peebee released VoidPup32 22.02+13 and VoidPup64 22.02+13 on Dec 19, 2022 and VoidPup32 22.02+14 and VoidPup64 22.02+14 on Dec 26, 2022

more information: https://forum.puppylinux.com/viewtopic.php?t=5270

download iso:
VoidPup64 22.02+13, 14 iso: https://sourceforge.net/projects/vpup/files/VoidPup64
VoidPup32 22.02+13, 14 iso: https://sourceforge.net/projects/vpup/files/VoidPup32/

I have created 6 half-Chinese language pets for voidpup64 22.02+13, 14 and 6 half-Chinese language pets for voidpup32 22.02+13, 14:
voidpup64:
fcitx Chinese input platform: fcitx64_4.2.7-en-zh-bionic-21.0.4.pet (17 mb)
gcin Chinese input platform: gcin64_2.9.0-en-zh-bionic-21.0.4.pet (9 mb)
hime Chinese input platform: hime64_0.9.11-en-zh-bionic-21.0.4.pet (5 mb)
ibus64 Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.0.4.pet (53 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-21.0.4.pet (14 mb)
yong Chinese input platform: yong64_2.5.0-en-zh-bionic-21.0.4.pet (10 mb)

voidpup32:
fcitx Chinese input platform: fcitx_4.2.9-en-zh-bionic-20.2.9.pet (26 mb)
gcin Chinese input platform: gcin32_2.9.0-en-zh-bionic-20.2.9.pet (20 mb)
hime Chinese input platform: hime32_0.9.11-en-zh-bionic-20.2.9.pet (18 mb)
ibus Chinese input platform: ibus_1.5.17-en-zh-bionic-20.2.9.pet (38 mb)
scim Chinese input platform: scim_1.4.18-en-zh-bionic-20.2.9.pet (17 mb)
yong Chinese input platform: yong32_2.5.0-en-zh-bionic-20.2.9.pet (10 mb)

Plus 2 Chinese language pets each for voidpup64 22.02+13, 14 and voidpup32 22.02+13, 14:
voidpup64:
Simplified Chinese:
void64-22.02.14-zhcn-21.0.4.pet (4 mb)
void64-22.02.13-zhcn-21.0.4.pet (4 mb)

Traditional Chinese:
void64-22.02.14-zhhk-21.0.4.pet (3 mb)
void64-22.02.13-zhhk-21.0.4.pet (3 mb)

voidpup32:
Simplified Chinese:
void-22.02.14-zhcn-20.2.9.pet (4 mb)
void-22.02.13-zhcn-20.2.9.pet (4 mb)

Traditional Chinese:
void-22.02.14-zhhk-20.2.9.pet (3 mb)
void-22.02.13-zhhk-20.2.9.pet (3 mb)

To use:
(a) any 1 of the half-Chinese language pets will enable you to display and input Chinese in voidpup64 22.02+13, 14 (please use the 21.0.4 pets) and voidpup32 22.02+13, 14 (please use the 20.2.9 pets)

(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for voidpup64 22.02+13, 14 and voidpup32 22.02+13, 14. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

For more information about the fcitx, ibus, gcin, hime, scim and yong half-Chinese language pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

[icake]

BarryK has recently released EasyOS Dunfell-series 64 bit 4.5.3 to 4.5.5

more information and annoucement notes: https://forum.puppylinux.com/viewforum.php?f=63

download addresses:
4.5.5: https://distro.ibiblio.org/easyos/amd64 ... 022/4.5.5/
4.5.4: https://distro.ibiblio.org/easyos/amd64 ... 022/4.5.4/
4.5.3: https://distro.ibiblio.org/easyos/amd64 ... 022/4.5.3/

I have created these icake Chinese language pets for easydunfell 4.5.3 to 4.5.5:
(A) 6 half-Chinese pets:
fcitx Chinese input platform: fcitx64_4.2.7-en-zh-bionic-21.2.7.pet (14 mb)
gcin Chinese input platform: gcin64_2.9.0-en-zh-bionic-21.2.7.pet (9 mb)
hime Chinese input platform: hime64_0.9.11-en-zh-bionic-21.2.7.pet (6 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.2.7.pet (35 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-21.2.7.pet (10 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-21.2.7.pet (9 mb)

Please note that 64 bit ibus Chinese input platform cannot input Chinese in Libreoffice 7 and seamonkey browser that comes with easyos dunfell 4.5.3 to 4.5.5. If you want to run a browser with 64 bit ibus, please try light and palemoon (28.4.0).

(B) 2 Chinese language pets each for easydunfell 4.5.3 to 4.5.5:
Simplified Chinese:
easydunfell-4.5.5-zhcn-21.2.7.pet (4 mb)
easydunfell-4.5.4-zhcn-21.2.7.pet (4 mb)
easydunfell-4.5.3-zhcn-21.2.7.pet (4 mb)

Traditional Chinese:
easydunfell-4.5.5-zhhk-21.2.7.pet (3 mb)
easydunfell-4.5.4-zhhk-21.2.7.pet (3 mb)
easydunfell-4.5.3-zhhk-21.2.7.pet (3 mb)

To use:
(a) any 1 of the half-Chinese language pets will enable you to display and input Chinese in easydunfell 4.5.3 to 4.5.5

(b) the 2 name+version number corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for easydunfell 4.5.3 to 4.5.5. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

more information about the fcitx, gcin, hime, ibus, scim and yong pets, please see the first posting of this subject.

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

[icake]

rockedge released F96_4-radky6-CE on Dec 31, 2022

more information and discussions: https://forum.puppylinux.com/viewtopic. ... &start=110

download F96_4-radky6-CE.iso (494 mb): https://www.smokey01.com/radky/Testing/ ... radky6.iso

I have created 6 half-Chinese language pets for:
fcitx Chinese input platform: fcitx64_4.2.7-en-zh-raring-14.0.9a.pet (16 mb)
gcin Chinese input platform: gcin64_2.8.2-en-zh-raring-14.0.9a.pet (6 mb)
hime Chinese input platform: hime64_0.9.11-en-zh-raring-14.0.9a.pet (5 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-raring-14.0.9a.pet (53 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-raring-14.0.9a.pet (13 mb)
yong Chinese input platform: yong64_2.5.0-en-zh-raring-14.0.9a.pet (10 mb)

Plus 2 Chinese language pets each for F96_4-radky6-CE:
Simplified Chinese: F96_4-radky6-CE-zhcn-14.0.9a.pet (4 mb)
Traditional Chinese: F96_4-radky6-CE-zhhk-14.0.9a.pet (3 mb)

To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in F96_4-radky6-CE

(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for F96_4-radky6-CE. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

For more information about the fcitx, gcin, hime, ibus, scim and yong half-Chinese language pets, please see the first posting of this subject

B. icake combo iso
I have also installed suitable icake Chinese language pets and remastered 2 combo live cds with multi Chinese input platforms:
icake64-F96_4-CE_radky6-est-fghisy.iso
icake64lo645-F96_4-CE_radky6-est-fghisy.iso

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

[icake]

mistfire has recently released QuickPup64 23.01 beta1 on Jan 15, 2023

More information and forum discussions: https://forum.puppylinux.com/viewtopic. ... &start=332

Download iso: https://drive.google.com/file/d/1yl9b3b ... u_EKmhzdnR

I have created 6 half-Chinese language pets for QuickPup 23.01 beta1:
fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-21.3.5.pet (24 mb)
gcin Chinese input platform: gcin64_2.9.0-en-zh-bionic-21.3.5.pet (5 mb)
hime Chinese input platform: himg64_0.9.11-en-zh-bionic-21.3.5.pet (5 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.3.5.pet (55 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-21.3.5.pet (10 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-21.3.5.pet (10 mb)

Plus 4 Chinese language pets each for QuickPup 23.01 beta1:
Simplified Chinese: quickpup64-23.01beta1-zhcn-21.3.5.pet (3 mb)
Traditional Chinese: quickpup64-23.01beta1-zhhk-21.3.5.pet (3 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in QuickPup 23.01 beta1

(b) the name+version number corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for QuickPup 23.01 beta1. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

for more information about the fcitx, gcin, hime, ibus, scim and yong half-Chinese pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

[icake]

peebee released S15Pup-22.12+2 64 and 32 bit on Jan 15, 2023

more information and discussions: https://forum.puppylinux.com/viewtopic.php?t=7464

download isoes:
S15Pup64: https://sourceforge.net/projects/spup/files/S15Pup64/
S15Pup32: https://sourceforge.net/projects/spup/files/S15Pup32/

I have created 6 half-Chinese language pets for:
32 bit S15Pup32-22.12+2.iso:
fcitx Chinese input platform: fcitx_4.2.7-en-zh-raring-14.3.9.pet (19 mb)
gcin Chinese input platform: gcin32_2.9.0-en-zh-raring-14.3.9.pet (20 mb)
hime Chinese input platform: hime32_0.9.11-en-zh-raring-14.3.9.pet (18 mb)
ibus Chinese input platform: ibus32_1.5.19-en-zh-raring-14.3.9.pet (39 mb)
scim Chinese input platform: scim_1.4.14-en-zh-raring-14.3.9.pet (14 mb)
yong Chinese input platform: yong32_2.5.0-en-zh-raring-14.3.9.pet (10 mb)

and for 64 bit S15Pup64-22.12+2.iso
fcitx Chinese input platform: fcitx64_4.2.7-en-zh-raring-14.0.9.pet (16 mb)
gcin Chinese input platform: gcin64_2.8.2-en-zh-raring-14.0.9.pet (7 mb)
hime Chinese input platform: hime64_0.9.11-en-zh-raring-14.0.9.pet (5 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-raring-14.0.9.pet (53 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-raring-14.0.9.pet (13 mb)
yong Chinese input platform: yong64_2.5.0-en-zh-raring-14.0.9.pet (10 mb)

Plus 2 Chinese language pets each for S15Pup32-22.12.+2, and S15Pup64-22.12+2:
Simplified Chinese:
s15pup32-22.12.02T-zhcn-14.3.9.pet (4 mb)
s15pup64-22.12.02T-zhcn-14.0.9.pet (4 mb)

Traditional Chinese:
s15pup32-22.12.02T-zhhk-14.3.9.pet (3 mb)
s15pup64-22.12.02T-zhhk-14.0.9.pet (3 mb)

To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in s15pup32-22.12+2 (use the 14.3.9 pets) and s15pup64-22.12+2 (use the 14.0.9 pets)

(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for S15Pup32-22.12+2 and S15Pup64-22.12+2. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

For more information about the fcitx, gcin, hime, ibus, scim and yong half-Chinese language pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

[icake]

wizard released Friendly-Fossa64 v1.0 on Jan 30, 2023

more information: viewtopic.php?t=4681&start=33

download friendly-fossa64-v1.0.iso (591 mb): https://sourceforge.net/projects/friend ... o/download

I. icake half-Chinese and Chinese language pets

I have created 6 half-Chinese language pets for Friendly-Fossa64 v1.0:
fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-23.0.3.pet (26 mb)
gcin Chinese input platform: gcin64_2.8.2-en-zh-bionic-23.0.3.pet (7 mb)
hime Chinese input platform: himg64_0.9.11-en-zh-bionic-23.0.3.pet (6 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-23.0.3.pet (32 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-23.0.3.pet (15 mb)
yong Chinese input platform: yong64_2.5.0-en-zh-bionic-23.0.3.pet (11 mb)

Plus 4 Chinese language pets each for Friendly-Fossa64 v1.0:
Simplified Chinese: friendly-fossa64-v1.0-zhcn-23.0.3.pet (4 mb)
Traditional Chinese: friendly-fossa64-v1.0-zhhk-23.0.3.pet (3 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in Friendly-Fossa64 v1.0

(b) the name+version number corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for Friendly-Fossa64 v1.0. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

II. icake combo live iso
I have also remastered 2 icake combo live iso based on Friendly-Fossa64 v1.0, one with all suitable icake half-Chinese and Chinese language pets and the second one includes libreoffice 64 bit version 6.4.5:
icake64-friendly-fossa64-v1.0-est-fghisy.iso （714 mb）
icake64lo645-friendly-fossa64-v1.0-est-fghisy.iso （947 mb）

for more information about the fcitx, gcin, hime, ibus, scim and yong half-Chinese pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

[icake]

rockedge released F96-CE on Jan 30, 2023 and F96-CE_1 on Feb 17, 2023

more information and discussions: viewtopic.php?t=7905&sid=be0663dc2ff5e9 ... d1fd7e7a98

download iso: https://rockedge.org/kernels/data/ISO/F96-CE/

I. icake half-Chinese and Chinese language pets

I have created 6 half-Chinese language pets for F96-CE and F96-CE_1:
fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-21.0.6.pet (19 mb)
gcin Chinese input platform: gcin64_2.9.0-en-zh-bionic-21.0.6.pet (6 mb)
hime Chinese input platform: hime64_0.9.11-en-zh-bionic-21.0.6.pet (5 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.0.6.pet (42 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-21.0.6.pet (13 mb)
yong Chinese input platform: yong64_2.5.0-en-zh-bionic-21.0.6.pet (10 mb)

Plus 2 Chinese language pets each for F96-CE and F96-CE_1:
Simplified Chinese:
F96-CE-zhcn-21.0.6.pet (4 mb)
F96-CE_1-zhcn-21.0.6.pet (4 mb)

Traditional Chinese:
F96-CE-zhhk-21.0.6.pet (3 mb)
F96-CE_1-zhhk-21.0.6.pet (3 mb)

To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in F96-CE and F96-CE_1

(b) the 2 name+version number corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for F96-CE and F96-CE_1. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

II. icake combo live iso
I have also remastered 2 icake combo live iso each based on F96-CE and F96-CE_1, one with all suitable icake half-Chinese and Chinese language pets and the second one includes libreoffice 64 bit version 6.4.5:
icake64-F96-CE-est-fghisy.iso （631 mb）
icake64lo645-F96-CE-est-fghisy.iso （865 mb）
icake64-F96-CE_1-est-fghisy.iso （654 mb）
icake64lo645-F96-CE_1-est-fghisy.iso （877 mb）

more information about the fcitx, gcin, hime, ibus, scim and yong pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

[icake]

peebee released LxPupSc64-23.01+0-T.iso and LxPupSc32-23.01+0-T-k64.iso on Jan 20, 2023 and delta to 23.01+1 on Feb 12, 2023

more information and discussions: viewtopic.php?t=124&start=290

download isoes and delta files:
64 bit: https://www.smokey01.com/peebee/LxPupSc32-23.01.htm
32 bit: https://www.smokey01.com/peebee/LxPupSc32-23.01.htm

I. icake half-Chinese and Chinese language pets

I have created 6 half-Chinese language pets each for LxPupSc64-23.01+0-T and LxPupSc32-23.01+0-T-k64:
64 bit:
fcitx Chinese input platform: fcitx64_4.2.7-en-zh-bionic-21.1.8.pet (17 mb)
gcin Chinese input platform: gcin64_2.8.2-en-zh-bionic-21.1.8.pet (7 mb)
hime Chinese input platform: hime64_0.9.11-en-zh-bionic-21.1.8.pet (6 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.1.8.pet (55 mb)
scim Chinese input platform: scim64_1.4.14-en-zh-bionic-21.1.8.pet (17 mb)
yong Chinese input platform: yong64_2.5.0-en-zh-bionic-21.1.8.pet (10 mb)

32 bit:
fcitx Chinese input platform: fcitx32_4.2.7-en-zh-raring-14.2.9.pet (21 mb)
gcin Chinese input platform: gcin32_2.8.2-en-zh-raring-14.2.9.pet (10 mb)
hime Chinese input platform: hime32_0.9.11-en-zh-raring-14.2.9.pet (17 mb)
ibus Chinese input platform: ibus32_1.5.17-en-zh-raring-14.2.9.pet (38 mb)
scim Chinese input platform: scim32_1.4.14-en-zh-raring-14.2.9.pet (15 mb)
yong Chinese input platform: yong32_2.5.0-en-zh-raring-14.2.9.pet (10 mb)

Plus 2 Chinese language pets each for LxPupSc64-23.01+0-T and LxPupSc32-23.01+0-T-k64 and 23.01+1:
Simplified Chinese:
lxpupsc64-23.01.01T-zhcn-21.1.8.pet (4 mb)
lxpupsc64-23.01.00T-zhcn-21.1.8.pet (4 mb)
lxpupsc32-23.01.01Tk64-zhcn-14.2.9.pet (4 mb)
lxpupsc-23.01.00Tk64-zhcn-14.2.9.pet (4 mb)

Traditional Chinese:
lxpupsc64-23.01.01T-zhhk-21.1.8.pet (3 mb)
lxpupsc64-23.01.00T-zhhk-21.1.8.pet (3 mb)
lxpupsc32-23.01.01Tk64-zhhk-14.2.9.pet (3 mb)
lxpupsc-23.01.00Tk64-zhhk-14.2.9.pet (3 mb)

To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in LxPupSc64-23.01+0-T and LxPupSc32-23.01+0-T-k64 and 23.01+1

(b) the 2 name+version number corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for LxPupSc64-23.01+0-T and LxPupSc32-23.01+0-T-k64 and 23.01+1. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

II. icake combo live iso
I have also remastered 2 icake combo live iso based on each of LxPupSc64-23.01+0-T and LxPupSc32-23.01+0-T-k64, one with all suitable icake half-Chinese and Chinese language pets and the second one includes libreoffice (version 6.4.5 for 64 bit; version 6.2.8 for 32 bit):
icake64-LxPupSc64-23.01+0-T-est-fghisy.iso （484 mb）
icake64lo645-LxPupSc64-23.01+0-T-est-fghisy.iso （742 mb）
icake32-LxPupSc32-23.01+0-T-k64-est-fghisy.iso (484 mb)
icake32lo628-LxPupSc32-23.01+0-T-k64-est-fghisy.iso (684 mb)

more information about the fcitx, gcin, hime, ibus, scim and yong pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

[icake]

peebee released frequent updates to VoidPup32 22.02 and VoidPup64 22.02

more information: viewtopic.php?t=124&start=302

download iso: https://github.com/peabee/releases/releases

I. icake half-Chinese and Chinese language pets

I have created 6 half-Chinese language pets for voidpup64 22.02 (updated 20230204) and 6 half-Chinese language pets for voidpup32 22.02 (updated 20230204):
voidpup64:
fcitx Chinese input platform: fcitx64_4.2.7-en-zh-bionic-21.0.7.pet (16 mb)
gcin Chinese input platform: gcin64_2.9.0-en-zh-bionic-21.0.7.pet (7 mb)
hime Chinese input platform: hime64_0.9.11-en-zh-bionic-21.0.7.pet (6 mb)
ibus64 Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.0.7.pet (55 mb)
scim Chinese input platform: scim64_1.4.14-en-zh-bionic-21.0.7.pet (13 mb)
yong Chinese input platform: yong64_2.5.0-en-zh-bionic-21.0.7.pet (10 mb)

voidpup32:
fcitx Chinese input platform: fcitx_4.2.7-en-zh-bionic-14.3.9.pet (20 mb)
gcin Chinese input platform: gcin32_2.9.0-en-zh-bionic-14.3.9.pet (21 mb)
hime Chinese input platform: hime32_0.9.11-en-zh-bionic-14.3.9.pet (18 mb)
ibus Chinese input platform: ibus_1.5.19-en-zh-bionic-14.3.9.pet (39 mb)
scim Chinese input platform: scim_1.4.14-en-zh-bionic-14.3.9.pet (15 mb)
yong Chinese input platform: yong32_2.5.0-en-zh-bionic-14.3.9.pet (10 mb)

Plus 2 Chinese language pets each for voidpup64 22.02 and voidpup32 22.02 updates on 2023 Feb 9:
Simplified Chinese:
void64-22.02-zhcn-21.0.7.pet (4 mb)
void32-22.02-zhcn-14.3.9.pet (4 mb)

Traditional Chinese:
void64-22.02-zhhk-21.0.7.pet (3 mb)
void32-22.02-zhhk-14.3.9.pet (3 mb)

To use:
(a) any 1 of the half-Chinese language pets will enable you to display and input Chinese in voidpup64 22.02 update on 2023 Feb 9 (please use the 21.0.7 pets) and voidpup32 22 update on 2023 Feb 9 (please use the 14.3.9 pets)

(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for voidpup64 22.02 and voidpup32 22.02 updates on 2023 Feb 9. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

II. icake combo live iso
I have also remastered 2 icake combo live iso based on each of voidpup64 22.02 and voidpup32 22.02 updates on 2023 Feb 9, one with all suitable icake half-Chinese and Chinese language pets and the second one includes libreoffice (version 6.4.5 for 64 bit ; version 6.2.8 for 32 bit):
icake64-vpup64-22.02-est-fghisy.iso （644 mb）
icake64lo645-vpup64-22.02-est-fghisy.iso （878 mb）
icake32-vpup32-22.02-est-fghisy.iso (660 mb)
icake32lo628-vpup32-22.02-est-fghisy.iso (929 mb)

For more information about the fcitx, ibus, gcin, hime, scim and yong half-Chinese language pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

[icake]

peebee released frequent updates to S15Pup32 22.12 and S15Pup64 22.12

more information: viewtopic.php?t=124&start=302

download iso: https://github.com/peabee/releases/releases

I. icake half-Chinese and Chinese language pets

I have created 6 half-Chinese language pets for S15Pup64 22.12 (updated 20230204) and 6 half-Chinese language pets for S15Pup32 22.12 (updated 20230204):
64 bit S15Pup64-22.12.iso
fcitx Chinese input platform: fcitx64_4.2.7-en-zh-raring-14.0.9.pet (16 mb)
gcin Chinese input platform: gcin64_2.8.2-en-zh-raring-14.0.9.pet (7 mb)
hime Chinese input platform: hime64_0.9.11-en-zh-raring-14.0.9.pet (5 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-raring-14.0.9.pet (53 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-raring-14.0.9.pet (13 mb)
yong Chinese input platform: yong64_2.5.0-en-zh-raring-14.0.9.pet (10 mb)

32 bit S15Pup32-22.12.iso:
fcitx Chinese input platform: fcitx_4.2.7-en-zh-raring-14.3.9.pet (19 mb)
gcin Chinese input platform: gcin32_2.9.0-en-zh-raring-14.3.9.pet (20 mb)
hime Chinese input platform: hime32_0.9.11-en-zh-raring-14.3.9.pet (18 mb)
ibus Chinese input platform: ibus32_1.5.19-en-zh-raring-14.3.9.pet (39 mb)
scim Chinese input platform: scim_1.4.14-en-zh-raring-14.3.9.pet (14 mb)
yong Chinese input platform: yong32_2.5.0-en-zh-raring-14.3.9.pet (10 mb)

Plus 2 Chinese language pets each for S15Pup64 22.12 and S15Pup34 22.12 updates on 2023 Feb 4:
Simplified Chinese:
s15pup32-22.12-zhcn-14.3.9.pet (4 mb)
s15pup64-22.12-zhcn-14.0.9.pet (4 mb)

Traditional Chinese:
s15pup32-22.12-zhhk-14.3.9.pet (3 mb)
s15pup64-22.12-zhhk-14.0.9.pet (3 mb)

To use:
(a) any 1 of the half-Chinese language pets will enable you to display and input Chinese in S15Pup64 22.12 update on 2023 Feb 4 (please use the 14.3.9 pets) and S15Pup32 22.12 update on 2023 Feb 4 (please use the 14.0.9 pets)

(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for S15Pup64 22.12 and S15Pup32 22.12 updates on 2023 Feb 4. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

II. icake combo live iso
I have also remastered 2 icake combo live iso based on each of S15Pup64 22.12 and S15Pup32 22.12 updates on 2023 Feb 4, one with all suitable icake half-Chinese and Chinese language pets and the second one includes libreoffice (version 6.4.5 for 64 bit ; version 6.2.8 for 32 bit):
icake64-s15pup64-22.12-est-fghisy.iso （588 mb）
icake64lo645-s15pup64-22.12-est-fghisy.iso （821 mb）
icake32-s15pup32-22.12-est-fghisy.iso (526 mb)
icake32lo628-s15pup32-22.12-est-fghisy.iso (727 mb)

For more information about the fcitx, ibus, gcin, hime, scim and yong half-Chinese language pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

[icake]

peebee released frequent updates to bionicPup32ng 19.03 and focalPup32 20.12

more information: viewtopic.php?t=124&start=302

download iso: https://github.com/peabee/releases/releases

I. icake half-Chinese and Chinese language pets

I have created 6 half-Chinese language pets for bionicPup32ng 19.03 and focalPup32 20.12 (updated 20230204):
fcitx Chinese input platform: fcitx_4.2.9-en-zh-bionic-20.0.2.pet (28 mb)
gcin Chinese input platform: gcin32_2.9.0-en-zh-bionic-20.0.2.pet (5 mb)
hime Chinese input platform: hime32_0.9.10-en-zh-bionic-20.0.2.pet (5 mb)
ibus Chinese input platform: ibus32_1.5.17-en-zh-bionic-20.0.2.pet (33 mb)
scim Chinese input platform: scim_1.4.18-en-zh-bionic-20.0.2.pet (16 mb)
yong Chinese input platform: yong32_2.5.0-en-zh-bionic-20.0.2.pet (10 mb)

Plus 2 Chinese language pets each for bionicPup32ng 19.03 and focalPup32 20.12 updates on 2023 Feb 4:
Simplified Chinese:
bionicpup32ng-19.03-zhcn-20.0.2.pet (4 mb)
focalpup32-20.12-zhcn-20.0.2.pet (4 mb)

Traditional Chinese:
bionicpup32ng-19.03-zhhk-20.0.2.pet (3 mb)
focalpup32-20.12-zhhk-20.0.2.pet (3 mb)

To use:
(a) any 1 of the half-Chinese language pets will enable you to display and input Chinese in bionicPup32ng 19.03 and focalPup32 20.12 update on 2023 Feb 4

(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for bionicPup32ng 19.03 and focalPup32 20.12 updates on 2023 Feb 4. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

II. icake combo live iso
I have also remastered 2 icake combo live iso based on each of bionicPup32ng 19.03 and focalPup32 20.12 updates on 2023 Feb 4, one with all suitable icake half-Chinese and Chinese language pets and the second one includes libreoffice32 version 6.2.8:
bionicPup32ng 19.03:
icake32-upupbb-19.03-est-fghisy.iso （468 mb）
icake32lo628-upupbb-19.03-est-fghisy.iso （669 mb）
focalPup32 20.12:
icake32-upupff+d-20.12-est-fghisy.iso (494 mb)
icake32lo628-upupff+d-20.12-est-fghisy.iso (694 mb)

For more information about the fcitx, ibus, gcin, hime, scim and yong half-Chinese language pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

[icake]

mistfire has recently released QuickPup64 23.01 beta1 (Jan 15, 2023); beta2 (Jan 31, 2023) and beta3 (Feb 8, 2023)

More information and forum discussions: viewtopic.php?t=3171

Download iso:
beta1: https://drive.google.com/file/d/1yl9b3b ... u_EKmhzdnR
beta2: https://drive.google.com/file/d/1RCrkzB ... Xpa80sDXi7
beta3: https://drive.google.com/file/d/1DEIX7M ... pzPtmybcae

I have created 6 half-Chinese language pets for QuickPup 23.01 beta1 to 3:
fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-21.3.6.pet (24 mb)
gcin Chinese input platform: gcin64_2.9.0-en-zh-bionic-21.3.6.pet (5 mb)
hime Chinese input platform: himg64_0.9.11-en-zh-bionic-21.3.6.pet (5 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.3.6.pet (55 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-21.3.6.pet (10 mb)
yong Chinese input platform: yong64_2.5.0-en-zh-bionic-21.3.6.pet (10 mb)

Plus 4 Chinese language pets each for QuickPup 23.01 beta1 to 3:
Simplified Chinese:
quickpup64-23.01beta3-zhcn-21.3.6.pet (5 mb)
quickpup64-23.01beta2-zhcn-21.3.6.pet (5 mb)
quickpup64-23.01beta1-zhcn-21.3.6.pet (5 mb)

Traditional Chinese:
quickpup64-23.01beta3-zhhk-21.3.6.pet (4 mb)
quickpup64-23.01beta2-zhhk-21.3.6.pet (4 mb)
quickpup64-23.01beta1-zhhk-21.3.6.pet (4 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in QuickPup 23.01 beta1 to 3

(b) the name+version number corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for QuickPup 23.01 beta1 to 3. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

for more information about the fcitx, gcin, hime, ibus, scim and yong half-Chinese pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

[icake]

norgo released SLC_64-2020.12 kernel 5.7.2 on Jan 24, 2021

more information and discussions: viewtopic.php?t=1976

download slc_64-2020.12.iso (383 mb): https://smokey01.com/norgo/slacko/064/064.php

I. icake half-Chinese and Chinese language pets

I have created 5 half-Chinese language pets for SLC_64-2020.12:
fcitx Chinese input platform: fcitx_4.2.7-en-zh-raring-14.0.9.pet (16 mb)
gcin Chinese input platform: gcin_2.9.0-en-zh-raring-14.0.9.pet (7 mb)
hime Chinese input platform: hime_0.9.11-en-zh-raring-14.0.9.pet (6 mb)
scim Chinese input platform: scim_1.4.14-en-zh-raring-14.0.9.pet (13 mb)
yong Chinese input platform: yong64_2.5.0-en-zh-raring-14.0.9.pet (10 mb)

Plus 2 Chinese language pets each for SLC_64-2020.12:
Simplified Chinese: slc_64-2020.12-zhcn-14.0.9.pet (4 mb)

Traditional Chinese: slc_64-2020.12-zhhk-14.0.9.pet (3 mb)

To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in SLC_64-2020.12

(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for SLC_64-2020.12. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

II. icake combo live iso
I have also remastered 2 icake combo live iso based on SLC_64-2020.12, one with all suitable icake half-Chinese and Chinese language pets and the second one includes libreoffice64 version 6.4.5：
icake64-slc_64-2020.12-est-fghsy.iso (459 mb)
icake364lo645-slc_64-2020.12-est-fghsy.iso (693 mb)

For more information about the fcitx, gcin, hime, ibus, scim and yong half-Chinese language pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

[icake]

josejp2424 released Devuanpup 32 9.7.0-chimaera_4.0 on May 30, 2021

more information and discussions: [url]viewtopic.php?t=3083[\url]

download:
devuanpup-9.7.0-chimaera_4.0_i386.iso: [url]https://sourceforge.net/projects/devuan ... 0_i386.iso[\url]

I. icake half-Chinese and Chinese language pets

I have created 6 half-Chinese language pets for Devuanpup 32 9.7.0-chimaera_4.0 :
fcitx Chinese input platform: fcitx32_4.2.9-en-zh-bionic-20.1.6.pet (23 mb)
gcin Chinese input platform: gcin32_2.8.2-en-zh-bionic-20.1.6.pet (5 mb)
hime Chinese input platform: hime32_0.9.11-en-zh-bionic-20.1.6.pet (5 mb)
ibus Chinese input platform: ibus32_1.5.19-en-zh-bionic-20.1.6.pet (38 mb)
scim Chinese input platform: scim32_1.4.18-en-zh-bionic-20.1.6.pet (14 mb)
yong Chinese input platform: yong32_2.5.0-en-zh-bionic-20.1.6.pet (10 mb)

Plus 2 Chinese language pets each for Devuanpup 32 9.7.0-chimaera_4.0 :
Simplified Chinese: devuanpup-9.7.0-chimaera_4.0_i386-zhcn-20.1.6.pet (4 mb)

Traditional Chinese: devuanpup-9.7.0-chimaera_4.0_i386-zhhk-20.1.6.pet (3 mb)

To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in Devuanpup 32 9.7.0-chimaera_4.0

(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for Devuanpup 32 9.7.0-chimaera_4.0. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already nstalled to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

II. icake combo live iso
I have also remastered 2 icake combo live iso based on Devuanpup 32 9.7.0-chimaera_4.0, one with all suitable icake half-Chinese and Chinese language pets and the second one includes libreoffice32 version 6.2.8：
icake32-devuanpup-9.7.0-chimaera_4.0_i386-est-fghisy.iso (613 mb)
icake32lo628-devuanpup-9.7.0-chimaera_4.0_i386-est-fghisy.iso (813 mb)

For more information about the fcitx, gcin, hime, ibus, scim and yong half-Chinese language pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

[icake]

jrb released Jammy64pup A1 on Feb 16, 2023; A3 on Feb 20, 2023; and B1 on Feb 22, 2023

more information and discussions: viewtopic.php?t=8040

download iso:
upup-22.04-jrb-A1.iso: https://drive.google.com/file/d/1YybUhX ... MVnYF/view
upup-22.04-jrb-A3: https://drive.google.com/file/d/1HkdxfC ... hLroI/view
upup-22.04-jrb-B1: https://drive.google.com/file/d/1c0Awpj ... sp=sharing

I. icake half-Chinese and Chinese language pets

I have created 6 half-Chinese language pets for jammy64pup A1 to B1:
fcitx Chinese input platform: fcitx64_4.2.7-en-zh-bionic-23.1.0.pet (16 mb)
gcin Chinese input platform: gcin64_2.8.2-en-zh-bionic-23.1.0.pet (6 mb)
hime Chinese input platform: hime64_0.9.11-en-zh-bionic-23.1.0.pet (5 mb)
ibus Chinese input platform: ibus64_1.5.23-en-zh-bionic-23.1.0.pet (55 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-23.1.0.pet (14 mb)
yong Chinese input platform: yong64_2.5.0-en-zh-bionic-23.1.0.pet (10 mb)

Plus 2 Chinese language pets each for jammy64pup A1 to B1:
Simplified Chinese:
upup64-22.04.jrb.b1-zhcn-23.1.0.pet (4 mb)
upup64-22.04.jrb.a3-zhcn-23.1.0.pet (4 mb)
upup64-22.04.jrb.a1-zhcn-23.1.0.pet (4 mb)

Traditional Chinese:
upup64-22.04.jrb.b1-zhhk-23.1.0.pet (3 mb)
upup64-22.04.jrb.a3-zhhk-23.1.0.pet (3 mb)
upup64-22.04.jrb.a1-zhhk-23.1.0.pet (3 mb)

To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in jammy64pup A1 to B1

(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for jammy64pup A1 to B1. Please note that all Chinese language pets rely on a uitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

II. icake combo live iso
I have also remastered 2 icake combo live iso based on jammy64pup A3, one with all suitable icake half-Chinese and Chinese language pets and the second one includes libreoffice64 version 6.4.5：
icake64-upup-22.04-jrb-A3-est-fghsy.iso (644 mb)
icake64lo645-upup-22.04-jrb-A3-est-fghsy.iso (877 mb)

For more information about the fcitx, gcin, hime, ibus, scim and yong half-Chinese language pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.