No Synaptics touchpad found - How to get driver? (solved)

[mcman56]

I have a new install of BookwormPup64_10.0.7 on a Samsung Model code: XE500C13-K01us Chromebook with Intel Celeron CPU N3050 1.6,

The touch pad does not work and when selecting Touchpad manager, I get "No Synaptics touchpad found" and "File /mnt/sdb1/pad was not found on disk!" Looking in /mnt/sdb1 it is empty. I assume it is looking for a driver. Is there a way to provide a driver?

The touchpad worked in lubuntu with Linux version 5.15.0-119-generic. I tried the other flavors of the latest puppys and none recognized the touchpad. Puppy shows the Linux version 6.1.94.

[ozsouth]

@mcman56 - could be a missing driver (i2c_hid, elantouch maybe) or need libinput config. Bit disturbing that none of the Puppies run it. As 5.15 kernel worked on that old CPU, you may need an older kernel, but with Bookworm, it must be usrmerge & kbuild must be disabled (add .no to end of filename). What other Puppies did you try? Chromebooks usually need special configs. Something to try (at own risk):

For libinput config, you could try making a file in /root folder named .libinputrc , (assuming it doesn't exist) containing:
LIBINPUT_DEFAULT_TOUCHPAD_ON=1
then save it & restart X.

Must have dot at start of filename (is a hidden file) & if file already exists, just add above line to end.
This fixed a touchpad issue in s15pup64.

[mcman56]

The file existed but when I added LIBINPUT_DEFAULT_TOUCHPAD_ON=1, the pad is still not recognized. Is there a way to find out what puppu used 5.15.0-119-generic so I could try that versionb?,

[radky]

@mcman56

In BW64 the default touchpad manager (psynclient) provides access to synclient control of Synaptics touchpads. If your touchpad is not recognized by the synclient utility, there is another option that provides basic libinput control of touchpads.

Go to Puppy Menu -> Setup -> Puppy Setup -> Mouse/Keyboard -> then click the configuration button (lower right). This provides a gui to select the touchpad manager (either Synaptics or Libinput). Choose the Libinput option and click Reboot (and save if prompted).

After rebooting, return to Puppy Setup -> Mouse/Keyboard (Input Wizard) -> then configure your preferred libinput settings for the touchpad.

If the Libinput manager does not work for your touchpad, maybe other forum members with chromebooks will provide additional guidance.

[mcman56]

When selecting Libinput, the pad still does not work. All of the menu options the touchpad also disappear.

[clm1919]

Just double checking something against a similar issue I had on some models of chromebook - the touchpad would ALSO stop working under ChromeOS sometimes. Turns out the problem was hardware, not software.

Either replacing the touchpad cable OR just removing it and cleaning both ends of the cable AND the two ports with alcohol worked on most of the machines that had the issue. There are also some fixes online involving hot glue and hairdryers - but i found the cable clean/replace was simple and cheap enough.

If the touchpad works fine under ChromeOS though, i doubt this would help.

Just sharing a fix that worked for me.

[bigpup]

The touchpad worked in lubuntu with Linux version 5.15.0-119-generic

Can you still boot with this and find out what exact touchpad it is?

Some information program that will provide specific make and model info.

BookwormPup64 has Pup-sysinfo program.

Pup-Sysinfo ->Devices ->Input ->Complete

But not sure it will show anything about yours, if driver or firmware is needed.

Anyway, at least knowing what manufacture it is will be some help to figure out what is needed.

[FeodorF]

Hi @bigpup
viewtopic.php?t=12571

[mikeslr]

Pre-1st cup of coffee. So only an idea & it may be a bad one.

The kernel which worked was 5.15.0-119-generic. The "0-119-generic" are point changes and frequently not by much. Ergo, any 5.15. kernel may have the necessary driver. But remember, Bookworm is "user-merged". Here's the index to published kernels: https://www.forum.puppylinux.com/viewtopic.php?t=9218. 5.15.148 64bit USRMERGE Kernel Aufs/Overlayfs might have the driver you need.

firmware is firmware and not kernel specific. It can be 'flinched' from whatever OS has it. Just remember that Bookworm being 'user-merged' you copy it into /usr/lib/firmware.

[mcman56]

That procedure is a bit above my skill set. I don't follow the details well. This is a new install without settings so I have no settings to lose or care about crashing the system.

I can download the sfs file and I see a firmware folder. Is there a way to simply replace the existing firmware folder with this new one? Could that work?

[FeodorF]

That procedure is a bit above my skill set. I don't follow the details well. This is a new install without settings so I have no settings to lose or care about crashing the system.

I can download the sfs file and I see a firmware folder. Is there a way to simply replace the existing firmware folder with this new one? Could that work?

Hi @mcman56

Let's go this way:

download and install fossapup64-9.5 (2020) from http://distro.ibiblio.org/puppylinux/puppy-fossa/ .
As it comes with a lot of old firmware drivers there is a chance that the touch pad will be supported too.

At boot up you'll get an error message from 'Synaptics'. You'll need to delete the file 'load-touchpap-settings' in the /root/Startup directory than save and reboot the system.

By the way - why don't you use a powered USB hub to connect the USB stick and a USB mouse while trouble shooting?

Chromebook 3.png (15.06 KiB) Viewed 1286 times

The manual still present at https://www.samsung.com/us/business/sup ... xe500c13k/

[mcman56]

I loaded 9.5 but the touchpad does not work with that either. I get the same error when trying to configure. I did not get the synaptics error at boot.

When I look into the startup folder, there is no synaptics. There is a file called load-touchpad-settings containing "exc flsynclient -s"

The extra configuration button is also not there. - "Go to Puppy Menu -> Setup -> Puppy Setup -> Mouse/Keyboard -> then click the configuration button (lower right)"

The chromebook has two USB ports so I can plug in a mouse for troubleshooting.

[FeodorF]

Hi @mcman56

start Menu->System->HardInfo and look at Input Devices.
What do you see over there?

start Menu->System->Kernel Modules and look for i2c entries.
Are there any?

start the console and enter dmesg.
Are there any devices found beside keyboard mouse and drives?

[mcman56]

This version does not have Kernel Modules but does have Pup-Kview. See screen shots and file. I see nothing in dmesg about a touchpad.

Not that I think it is related but since converting from chromebook I have had one issue across all versions of linux tried. Running any browser, the CPU will go to 100% and the whole system will lock up. Some times it is right away and sometimes it will run for a while.

hardinfo.png (152.14 KiB) Viewed 1048 times

i2C.png (151.38 KiB) Viewed 1048 times

Code: Select all

# dmesg
[    0.000000] Linux version 6.1.94 (root@c7ab79bbaa7f) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Mon Jul  1 02:12:01 UTC 2024
[    0.000000] Command line: BOOT_IMAGE=/short/vmlinuz pmedia=atahd pdrv=linux psubdir=/short pfix=fsck,fsckp,trim TZ=PST8PDT,M3.2.0,M11.1.0
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001e798fff] usable
[    0.000000] BIOS-e820: [mem 0x000000001e799000-0x000000001e799fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000001e79a000-0x000000001fc69fff] usable
[    0.000000] BIOS-e820: [mem 0x000000001fc6a000-0x000000001fc6cfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000001fc6d000-0x000000001fc71fff] usable
[    0.000000] BIOS-e820: [mem 0x000000001fc72000-0x000000001fc74fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000001fc75000-0x000000001feaefff] usable
[    0.000000] BIOS-e820: [mem 0x000000001feaf000-0x000000001ff2efff] type 20
[    0.000000] BIOS-e820: [mem 0x000000001ff2f000-0x000000001fff2fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000001fff3000-0x000000001fff6fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000001fff7000-0x000000001fffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000001ffff000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000007ccd0fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007ccd1000-0x000000007fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffdc0000-0x00000000ffdfffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.70 by EDK II
[    0.000000] efi: SMBIOS=0x1ffe8000 SMBIOS 3.0=0x1ffe6000 ACPI=0x1fffe000 ACPI 2.0=0x1fffe014 MEMATTR=0x1ec59018 
[    0.000000] secureboot: Secure boot could not be determined (mode 0)
[    0.000000] SMBIOS 3.3.0 present.
[    0.000000] DMI: GOOGLE Celes/Celes, BIOS MrChromebox-4.17.2 07/18/2022
[    0.000000] tsc: Detected 1600.000 MHz processor
[    0.000030] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000037] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000051] last_pfn = 0x7ccd1 max_arch_pfn = 0x400000000
[    0.000117] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.007541] RAMDISK: [mem 0x7a5f8000-0x7b5a9fff]
[    0.007557] ACPI: Early table checksum verification disabled
[    0.007564] ACPI: RSDP 0x000000001FFFE014 000024 (v02 COREv4)
[    0.007572] ACPI: XSDT 0x000000001E799F18 00005C (v01 COREv4 COREBOOT 00000000      01000013)
[    0.007583] ACPI: FACP 0x000000001FFFC000 000114 (v06 COREv4 COREBOOT 00000000 CORE 20220331)
[    0.007594] ACPI: DSDT 0x000000001FFF7000 004432 (v02 COREv4 COREBOOT 20110725 INTL 20220331)
[    0.007602] ACPI: FACS 0x000000007CCE9240 000040
[    0.007608] ACPI: SSDT 0x000000001FC73000 0010A3 (v02 COREv4 COREBOOT 0000002A CORE 20220331)
[    0.007614] ACPI: MCFG 0x000000001FC72000 00003C (v01 COREv4 COREBOOT 00000000 CORE 20220331)
[    0.007621] ACPI: TCPA 0x000000001FC6C000 000032 (v02 COREv4 COREBOOT 00000000 CORE 20220331)
[    0.007628] ACPI: APIC 0x000000001FC6B000 00005C (v03 COREv4 COREBOOT 00000000 CORE 20220331)
[    0.007634] ACPI: HPET 0x000000001FC6A000 000038 (v01 COREv4 COREBOOT 00000000 CORE 20220331)
[    0.007641] ACPI: BGRT 0x000000001E799018 000038 (v00 INTEL      EDK2 00001720 PTL  00000002)
[    0.007647] ACPI: Reserving FACP table memory at [mem 0x1fffc000-0x1fffc113]
[    0.007650] ACPI: Reserving DSDT table memory at [mem 0x1fff7000-0x1fffb431]
[    0.007652] ACPI: Reserving FACS table memory at [mem 0x7cce9240-0x7cce927f]
[    0.007655] ACPI: Reserving SSDT table memory at [mem 0x1fc73000-0x1fc740a2]
[    0.007657] ACPI: Reserving MCFG table memory at [mem 0x1fc72000-0x1fc7203b]
[    0.007659] ACPI: Reserving TCPA table memory at [mem 0x1fc6c000-0x1fc6c031]
[    0.007662] ACPI: Reserving APIC table memory at [mem 0x1fc6b000-0x1fc6b05b]
[    0.007664] ACPI: Reserving HPET table memory at [mem 0x1fc6a000-0x1fc6a037]
[    0.007666] ACPI: Reserving BGRT table memory at [mem 0x1e799018-0x1e79904f]
[    0.007801] No NUMA configuration found
[    0.007803] Faking a node at [mem 0x0000000000000000-0x000000007ccd0fff]
[    0.007823] NODE_DATA(0) allocated [mem 0x7cca6000-0x7ccd0fff]
[    0.008501] Zone ranges:
[    0.008504]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.008508]   DMA32    [mem 0x0000000001000000-0x000000007ccd0fff]
[    0.008511]   Normal   empty
[    0.008513]   Device   empty
[    0.008515] Movable zone start for each node
[    0.008520] Early memory node ranges
[    0.008522]   node   0: [mem 0x0000000000001000-0x000000000009ffff]
[    0.008525]   node   0: [mem 0x0000000000100000-0x000000001e798fff]
[    0.008527]   node   0: [mem 0x000000001e79a000-0x000000001fc69fff]
[    0.008529]   node   0: [mem 0x000000001fc6d000-0x000000001fc71fff]
[    0.008532]   node   0: [mem 0x000000001fc75000-0x000000001feaefff]
[    0.008534]   node   0: [mem 0x000000001ffff000-0x000000001fffffff]
[    0.008536]   node   0: [mem 0x0000000020200000-0x000000007ccd0fff]
[    0.008540] Initmem setup node 0 [mem 0x0000000000001000-0x000000007ccd0fff]
[    0.008553] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.008632] On node 0, zone DMA: 96 pages in unavailable ranges
[    0.010241] On node 0, zone DMA32: 1 pages in unavailable ranges
[    0.010247] On node 0, zone DMA32: 3 pages in unavailable ranges
[    0.010250] On node 0, zone DMA32: 3 pages in unavailable ranges
[    0.010262] On node 0, zone DMA32: 336 pages in unavailable ranges
[    0.010280] On node 0, zone DMA32: 512 pages in unavailable ranges
[    0.010675] On node 0, zone DMA32: 13103 pages in unavailable ranges
[    0.010695] Reserving Intel graphics memory at [mem 0x7e000000-0x7fffffff]
[    0.010863] ACPI: PM-Timer IO Port: 0x408
[    0.010894] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-114
[    0.010902] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.010908] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.010915] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.010918] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.010941] e820: update [mem 0x1e74c000-0x1e769fff] usable ==> reserved
[    0.010963] TSC deadline timer available
[    0.010965] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.011010] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.011015] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.011019] PM: hibernation: Registered nosave memory: [mem 0x1e74c000-0x1e769fff]
[    0.011023] PM: hibernation: Registered nosave memory: [mem 0x1e799000-0x1e799fff]
[    0.011027] PM: hibernation: Registered nosave memory: [mem 0x1fc6a000-0x1fc6cfff]
[    0.011031] PM: hibernation: Registered nosave memory: [mem 0x1fc72000-0x1fc74fff]
[    0.011035] PM: hibernation: Registered nosave memory: [mem 0x1feaf000-0x1ff2efff]
[    0.011038] PM: hibernation: Registered nosave memory: [mem 0x1ff2f000-0x1fff2fff]
[    0.011040] PM: hibernation: Registered nosave memory: [mem 0x1fff3000-0x1fff6fff]
[    0.011041] PM: hibernation: Registered nosave memory: [mem 0x1fff7000-0x1fffefff]
[    0.011046] PM: hibernation: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.011050] [mem 0x80000000-0xffdbffff] available for PCI devices
[    0.011053] Booting paravirtualized kernel on bare hardware
[    0.011058] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.021818] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[    0.022798] percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u1048576
[    0.022818] pcpu-alloc: s212992 r8192 d28672 u1048576 alloc=1*2097152
[    0.022826] pcpu-alloc: [0] 0 1 
[    0.022900] Fallback order for Node 0: 0 
[    0.022908] Built 1 zonelists, mobility grouping on.  Total pages: 500038
[    0.022912] Policy zone: DMA32
[    0.022916] Kernel command line: BOOT_IMAGE=/short/vmlinuz pmedia=atahd pdrv=linux psubdir=/short pfix=fsck,fsckp,trim TZ=PST8PDT,M3.2.0,M11.1.0
[    0.023116] Unknown kernel command line parameters "BOOT_IMAGE=/short/vmlinuz pmedia=atahd pdrv=linux psubdir=/short pfix=fsck,fsckp,trim TZ=PST8PDT,M3.2.0,M11.1.0", will be passed to user space.
[    0.023145] random: crng init done
[    0.023926] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.024388] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.024449] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[    0.030884] Memory: 248332K/2040932K available (18445K kernel code, 3176K rwdata, 12240K rodata, 3016K init, 16808K bss, 146140K reserved, 0K cma-reserved)
[    0.031282] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.031321] Kernel/User page tables isolation: enabled
[    0.031408] ftrace: allocating 53188 entries in 208 pages
[    0.042997] ftrace: allocated 208 pages with 3 groups
[    0.044720] Dynamic Preempt: voluntary
[    0.044797] rcu: Preemptible hierarchical RCU implementation.
[    0.044800] rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=2.
[    0.044804] 	Trampoline variant of Tasks RCU enabled.
[    0.044806] 	Rude variant of Tasks RCU enabled.
[    0.044807] 	Tracing variant of Tasks RCU enabled.
[    0.044808] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.044810] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.057759] NR_IRQS: 524544, nr_irqs: 512, preallocated irqs: 16
[    0.058034] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.058183] Console: colour dummy device 80x25
[    0.058219] printk: console [tty0] enabled
[    0.058258] ACPI: Core revision 20220331
[    0.058378] hpet: HPET dysfunctional in PC10. Force disabled.
[    0.058382] APIC: Switch to symmetric I/O mode setup
[    0.059832] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x171024fa93b, max_idle_ns: 440795253189 ns
[    0.059844] Calibrating delay loop (skipped), value calculated using timer frequency.. 3200.00 BogoMIPS (lpj=6400000)
[    0.059876] CPU0: Thermal monitoring enabled (TM1)
[    0.059904] process: using mwait in idle threads
[    0.059911] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
[    0.059914] Last level dTLB entries: 4KB 256, 2MB 16, 4MB 16, 1GB 0
[    0.059921] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.059927] Spectre V2 : Mitigation: Retpolines
[    0.059929] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.059931] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.059932] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.059936] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.059939] MDS: Mitigation: Clear CPU buffers
[    0.059941] MMIO Stale Data: Unknown: No mitigations
[    0.059946] x86/fpu: x87 FPU will use FXSAVE
[    0.063840] Freeing SMP alternatives memory: 48K
[    0.063840] pid_max: default: 32768 minimum: 301
[    0.063840] LSM: Security Framework initializing
[    0.063840] landlock: Up and running.
[    0.063840] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.063840] AppArmor: AppArmor initialized
[    0.063840] TOMOYO Linux initialized
[    0.063840] LSM support for eBPF active
[    0.063840] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.063840] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.063840] smpboot: CPU0: Intel(R) Celeron(R) CPU  N3050  @ 1.60GHz (family: 0x6, model: 0x4c, stepping: 0x3)
[    0.063840] cblist_init_generic: Setting adjustable number of callback queues.
[    0.063840] cblist_init_generic: Setting shift to 1 and lim to 1.
[    0.063840] cblist_init_generic: Setting adjustable number of callback queues.
[    0.063840] cblist_init_generic: Setting shift to 1 and lim to 1.
[    0.063840] cblist_init_generic: Setting adjustable number of callback queues.
[    0.063840] cblist_init_generic: Setting shift to 1 and lim to 1.
[    0.063840] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, 8-deep LBR, full-width counters, Intel PMU driver.
[    0.063840] ... version:                3
[    0.063840] ... bit width:              40
[    0.063840] ... generic registers:      2
[    0.063840] ... value mask:             000000ffffffffff
[    0.063840] ... max period:             0000007fffffffff
[    0.063840] ... fixed-purpose events:   3
[    0.063840] ... event mask:             0000000700000003
[    0.063840] signal: max sigframe size: 1440
[    0.063840] Estimated ratio of average max frequency by base frequency (times 1024): 1382
[    0.063840] rcu: Hierarchical SRCU implementation.
[    0.063840] rcu: 	Max phase no-delay instances is 1000.
[    0.063840] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.063840] smp: Bringing up secondary CPUs ...
[    0.063840] x86: Booting SMP configuration:
[    0.063840] .... node  #0, CPUs:      #1
[    0.067593] smp: Brought up 1 node, 2 CPUs
[    0.067593] smpboot: Max logical packages: 1
[    0.067593] smpboot: Total of 2 processors activated (6400.00 BogoMIPS)
[    0.076184] node 0 deferred pages initialised in 8ms
[    0.080228] devtmpfs: initialized
[    0.080228] x86/mm: Memory block size: 128MB
[    0.080752] ACPI: PM: Registering ACPI NVS region [mem 0x1fff3000-0x1fff6fff] (16384 bytes)
[    0.080752] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.080752] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[    0.080752] pinctrl core: initialized pinctrl subsystem
[    0.084245] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.084623] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[    0.084729] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.084832] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.084874] audit: initializing netlink subsys (disabled)
[    0.085092] audit: type=2000 audit(1725547630.024:1): state=initialized audit_enabled=0 res=1
[    0.085366] thermal_sys: Registered thermal governor 'fair_share'
[    0.085373] thermal_sys: Registered thermal governor 'bang_bang'
[    0.085376] thermal_sys: Registered thermal governor 'step_wise'
[    0.085377] thermal_sys: Registered thermal governor 'user_space'
[    0.085379] thermal_sys: Registered thermal governor 'power_allocator'
[    0.085413] cpuidle: using governor ladder
[    0.085427] cpuidle: using governor menu
[    0.085564] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.085725] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.085738] PCI: not using MMCONFIG
[    0.085747] PCI: Using configuration type 1 for base access
[    0.085977] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.089630] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.127895] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    0.127902] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[    0.212638] raid6: sse2x4   gen()  5266 MB/s
[    0.280827] raid6: sse2x2   gen()  5089 MB/s
[    0.349003] raid6: sse2x1   gen()  3923 MB/s
[    0.349007] raid6: using algorithm sse2x4 gen() 5266 MB/s
[    0.417194] raid6: .... xor() 1222 MB/s, rmw enabled
[    0.417198] raid6: using ssse3x2 recovery algorithm
[    0.417406] ACPI: Added _OSI(Module Device)
[    0.417410] ACPI: Added _OSI(Processor Device)
[    0.417412] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.417414] ACPI: Added _OSI(Processor Aggregator Device)
[    0.421985] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.424306] ACPI: EC: EC started
[    0.424310] ACPI: EC: interrupt blocked
[    0.425269] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.425276] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions
[    0.425280] ACPI: Interpreter enabled
[    0.425314] ACPI: PM: (supports S0 S3 S4 S5)
[    0.425318] ACPI: Using IOAPIC for interrupt routing
[    0.425361] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.425699] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.425734] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.425738] PCI: Using E820 reservations for host bridge windows
[    0.433519] ACPI: PM: Power Resource [PLPE]
[    0.435551] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.435566] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.435628] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[    0.436154] PCI host bridge to bus 0000:00
[    0.436160] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.436166] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.436171] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000fffff window]
[    0.436175] pci_bus 0000:00: root bus resource [mem 0x20000000-0x201fffff window]
[    0.436180] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window]
[    0.436188] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[    0.436193] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.436225] pci 0000:00:00.0: [8086:2280] type 00 class 0x060000
[    0.436371] pci 0000:00:02.0: [8086:22b1] type 00 class 0x030000
[    0.436389] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x90ffffff 64bit]
[    0.436402] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref]
[    0.436412] pci 0000:00:02.0: reg 0x20: [io  0x1000-0x103f]
[    0.436436] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.436444] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.436616] pci 0000:00:0b.0: [8086:22dc] type 00 class 0x118000
[    0.436636] pci 0000:00:0b.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[    0.436822] pci 0000:00:10.0: [8086:2294] type 00 class 0x080501
[    0.436844] pci 0000:00:10.0: reg 0x10: [mem 0x9131c000-0x9131cfff]
[    0.436932] pci 0000:00:10.0: PME# supported from D0 D3hot
[    0.437073] pci 0000:00:12.0: [8086:2296] type 00 class 0x080501
[    0.437095] pci 0000:00:12.0: reg 0x10: [mem 0x9131d000-0x9131dfff]
[    0.437182] pci 0000:00:12.0: PME# supported from D0 D3hot
[    0.437273] pci 0000:00:14.0: [8086:22b5] type 00 class 0x0c0330
[    0.437294] pci 0000:00:14.0: reg 0x10: [mem 0x91300000-0x9130ffff 64bit]
[    0.437362] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.437510] pci 0000:00:1b.0: [8086:2284] type 00 class 0x040300
[    0.437536] pci 0000:00:1b.0: reg 0x10: [mem 0x91314000-0x91317fff 64bit]
[    0.437621] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.437878] pci 0000:00:1c.0: [8086:22c8] type 01 class 0x060400
[    0.438757] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.439281] pci 0000:00:1c.2: [8086:22cc] type 01 class 0x060400
[    0.440158] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.440602] pci 0000:00:1f.0: [8086:229c] type 00 class 0x060100
[    0.441135] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.441831] pci 0000:02:00.0: [8086:095a] type 00 class 0x028000
[    0.442031] pci 0000:02:00.0: reg 0x10: [mem 0x91200000-0x91201fff 64bit]
[    0.442655] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.444151] pci 0000:00:1c.2: PCI bridge to [bus 02]
[    0.444206] pci 0000:00:1c.2:   bridge window [mem 0x91200000-0x912fffff]
[    0.444567] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[    0.444571] ACPI: PCI: Interrupt link LNKA disabled
[    0.444674] ACPI: PCI: Interrupt link LNKB configured for IRQ 0
[    0.444678] ACPI: PCI: Interrupt link LNKB disabled
[    0.444779] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[    0.444783] ACPI: PCI: Interrupt link LNKC disabled
[    0.444884] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[    0.444888] ACPI: PCI: Interrupt link LNKD disabled
[    0.444989] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[    0.444993] ACPI: PCI: Interrupt link LNKE disabled
[    0.445094] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[    0.445099] ACPI: PCI: Interrupt link LNKF disabled
[    0.445201] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[    0.445206] ACPI: PCI: Interrupt link LNKG disabled
[    0.445306] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[    0.445311] ACPI: PCI: Interrupt link LNKH disabled
[    0.453648] ACPI: EC: interrupt unblocked
[    0.453657] ACPI: EC: event unblocked
[    0.453664] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.453667] ACPI: EC: GPE=0x10
[    0.453671] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC initialization complete
[    0.453675] ACPI: \_SB_.PCI0.LPCB.EC0_: EC: Used to handle transactions and events
[    0.455856] iommu: Default domain type: Translated 
[    0.455856] iommu: DMA domain TLB invalidation policy: lazy mode 
[    0.455856] SCSI subsystem initialized
[    0.455873] libata version 3.00 loaded.
[    0.455892] ACPI: bus type USB registered
[    0.455940] usbcore: registered new interface driver usbfs
[    0.455958] usbcore: registered new interface driver hub
[    0.455978] usbcore: registered new device driver usb
[    0.509683] pps_core: LinuxPPS API ver. 1 registered
[    0.509689] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.509697] PTP clock support registered
[    0.509720] EDAC MC: Ver: 3.0.0
[    0.511860] Registered efivars operations
[    0.512279] NetLabel: Initializing
[    0.512283] NetLabel:  domain hash size = 128
[    0.512286] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.512318] NetLabel:  unlabeled traffic allowed by default
[    0.512322] PCI: Using ACPI for IRQ routing
[    0.519150] PCI: pci_cache_line_size set to 64 bytes
[    0.519535] e820: reserve RAM buffer [mem 0x1e74c000-0x1fffffff]
[    0.519541] e820: reserve RAM buffer [mem 0x1e799000-0x1fffffff]
[    0.519544] e820: reserve RAM buffer [mem 0x1fc6a000-0x1fffffff]
[    0.519547] e820: reserve RAM buffer [mem 0x1fc72000-0x1fffffff]
[    0.519550] e820: reserve RAM buffer [mem 0x1feaf000-0x1fffffff]
[    0.519553] e820: reserve RAM buffer [mem 0x7ccd1000-0x7fffffff]
[    0.519640] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.519646] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.519649] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.519655] vgaarb: loaded
[    0.525264] clocksource: Switched to clocksource tsc-early
[    0.525645] VFS: Disk quotas dquot_6.6.0
[    0.525672] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.525980] AppArmor: AppArmor Filesystem Enabled
[    0.526032] pnp: PnP ACPI init
[    0.526221] system 00:00: [mem 0xfeb00000-0xfebfffff] has been reserved
[    0.526230] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[    0.526235] system 00:00: [mem 0xfed03000-0xfed033ff] has been reserved
[    0.526240] system 00:00: [mem 0xfed08000-0xfed09fff] has been reserved
[    0.526244] system 00:00: [mem 0xfed01000-0xfed013ff] has been reserved
[    0.526249] system 00:00: [mem 0xfea00000-0xfeafffff] has been reserved
[    0.526272] system 00:00: [mem 0xfed06000-0xfed067ff] has been reserved
[    0.526278] system 00:00: [mem 0xfed1c000-0xfed1c3ff] has been reserved
[    0.569944] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.570036] system 00:02: [io  0x0400-0x047f] has been reserved
[    0.570042] system 00:02: [io  0x0500-0x05fe] has been reserved
[    0.570175] system 00:04: [io  0x0900-0x09fe] has been reserved
[    0.570258] system 00:05: [io  0x0200] has been reserved
[    0.570264] system 00:05: [io  0x0204] has been reserved
[    0.570268] system 00:05: [io  0x0800-0x087f] has been reserved
[    0.570272] system 00:05: [io  0x0880-0x08ff] has been reserved
[    0.571047] pnp: PnP ACPI: found 8 devices
[    0.579301] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.579495] NET: Registered PF_INET protocol family
[    0.579689] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.582358] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[    0.582497] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.582566] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.582831] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.582972] TCP: Hash tables configured (established 16384 bind 16384)
[    0.583229] MPTCP token hash table entries: 2048 (order: 3, 49152 bytes, linear)
[    0.583300] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[    0.583342] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[    0.583454] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.583479] NET: Registered PF_XDP protocol family
[    0.583505] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
[    0.583516] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[    0.583523] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
[    0.583550] clipped [mem size 0x00050000] to [mem size 0xffffffffffff0000] for e820 entry [mem 0x000a0000-0x000fffff]
[    0.583558] clipped [mem size 0x00200000] to [mem size 0x00000000] for e820 entry [mem 0x20000000-0x201fffff]
[    0.583566] pci 0000:00:1c.0: BAR 14: assigned [mem 0x91400000-0x915fffff]
[    0.583576] clipped [mem size 0x00050000 64bit pref] to [mem size 0xffffffffffff0000 64bit pref] for e820 entry [mem 0x000a0000-0x000fffff]
[    0.583581] clipped [mem size 0x00200000 64bit pref] to [mem size 0x00000000 64bit pref] for e820 entry [mem 0x20000000-0x201fffff]
[    0.583588] pci 0000:00:1c.0: BAR 15: assigned [mem 0x91600000-0x917fffff 64bit pref]
[    0.583595] clipped [mem size 0x00050000 64bit] to [mem size 0xffffffffffff0000 64bit] for e820 entry [mem 0x000a0000-0x000fffff]
[    0.583600] clipped [mem size 0x00200000 64bit] to [mem size 0x00000000 64bit] for e820 entry [mem 0x20000000-0x201fffff]
[    0.583606] pci 0000:00:0b.0: BAR 0: assigned [mem 0x91311000-0x91311fff 64bit]
[    0.583625] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
[    0.583635] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.583659] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.583701] pci 0000:00:1c.0:   bridge window [mem 0x91400000-0x915fffff]
[    0.583735] pci 0000:00:1c.0:   bridge window [mem 0x91600000-0x917fffff 64bit pref]
[    0.583788] pci 0000:00:1c.2: PCI bridge to [bus 02]
[    0.583831] pci 0000:00:1c.2:   bridge window [mem 0x91200000-0x912fffff]
[    0.583904] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.583909] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.583912] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000fffff window]
[    0.583916] pci_bus 0000:00: resource 7 [mem 0x20000000-0x201fffff window]
[    0.583919] pci_bus 0000:00: resource 8 [mem 0x80000000-0xdfffffff window]
[    0.583923] pci_bus 0000:00: resource 9 [mem 0xfed40000-0xfed44fff window]
[    0.583927] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    0.583931] pci_bus 0000:01: resource 1 [mem 0x91400000-0x915fffff]
[    0.583934] pci_bus 0000:01: resource 2 [mem 0x91600000-0x917fffff 64bit pref]
[    0.583938] pci_bus 0000:02: resource 1 [mem 0x91200000-0x912fffff]
[    0.585195] PCI: CLS 64 bytes, default 64
[    0.585347] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x171024fa93b, max_idle_ns: 440795253189 ns
[    0.585404] clocksource: Switched to clocksource tsc
[    0.585361] Trying to unpack rootfs image as initramfs...
[    0.607856] Initialise system trusted keyrings
[    0.607897] Key type blacklist registered
[    0.608038] workingset: timestamp_bits=36 max_order=19 bucket_order=0
[    0.610791] zbud: loaded
[    0.611553] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.611734] ntfs3: Read-only LZX/Xpress compression included
[    0.611772] fuse: init (API version 7.37)
[    0.611965] SGI XFS with ACLs, security attributes, realtime, quota, no debug enabled
[    0.614771] integrity: Platform Keyring initialized
[    0.614806] integrity: Machine keyring initialized
[    0.614845] xor: measuring software checksum speed
[    0.615979]    prefetch64-sse  :  8705 MB/sec
[    0.617266]    generic_sse     :  7697 MB/sec
[    0.617269] xor: using function: prefetch64-sse (8705 MB/sec)
[    0.617279] Key type asymmetric registered
[    0.617281] Asymmetric key parser 'x509' registered
[    0.679470] Freeing initrd memory: 16072K
[    0.682358] alg: self-tests for CTR-KDF (hmac(sha256)) passed
[    0.682428] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    0.682531] io scheduler mq-deadline registered
[    0.698357] pcieport 0000:00:1c.0: PME: Signaling with IRQ 310
[    0.698506] pcieport 0000:00:1c.0: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[    0.700015] pcieport 0000:00:1c.2: PME: Signaling with IRQ 311
[    0.700494] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.701683] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.701988] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.702703] hpet_acpi_add: no address or irqs in _CRS
[    0.702734] Linux agpgart interface v0.103
[    0.706408] tpm_tis 00:07: 1.2 TPM (device-id 0xB, rev-id 16)
[    0.733634] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug.
[    0.736784] loop: module loaded
[    0.736864] usbcore: registered new interface driver rtsx_usb
[    0.738802] scsi host0: pata_legacy
[    0.738936] ata1: PATA max PIO4 cmd 0x1f0 ctl 0x3f6 irq 14
[    0.916853] scsi host0: pata_legacy
[    0.916966] ata2: PATA max PIO4 cmd 0x170 ctl 0x376 irq 15
[    1.092052] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.092074] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    1.093192] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081509810
[    1.093636] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.093645] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    1.093652] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[    1.093758] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
[    1.093765] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.093805] usb usb1: Product: xHCI Host Controller
[    1.093809] usb usb1: Manufacturer: Linux 6.1.94 xhci-hcd
[    1.093812] usb usb1: SerialNumber: 0000:00:14.0
[    1.094060] hub 1-0:1.0: USB hub found
[    1.094087] hub 1-0:1.0: 7 ports detected
[    1.094577] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01
[    1.094584] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.094587] usb usb2: Product: xHCI Host Controller
[    1.094590] usb usb2: Manufacturer: Linux 6.1.94 xhci-hcd
[    1.094593] usb usb2: SerialNumber: 0000:00:14.0
[    1.094784] hub 2-0:1.0: USB hub found
[    1.094809] hub 2-0:1.0: 6 ports detected
[    1.095806] usbcore: registered new interface driver uas
[    1.095854] usbcore: registered new interface driver usb-storage
[    1.095873] usbcore: registered new interface driver ums-realtek
[    1.095964] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 182
[    1.095969] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    1.099581] i8042: Warning: Keylock active
[    1.099786] serio: i8042 KBD port at 0x60,0x64 irq 182
[    1.100008] mousedev: PS/2 mouse device common for all mice
[    1.100078] rtc_cmos 00:03: RTC can wake from S4
[    1.100428] rtc_cmos 00:03: registered as rtc0
[    1.100476] rtc_cmos 00:03: setting system clock to 2024-09-05T14:47:11 UTC (1725547631)
[    1.100558] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram
[    1.101446] intel_pstate: Intel P-state driver initializing
[    1.101981] sdhci: Secure Digital Host Controller Interface driver
[    1.101995] sdhci: Copyright(c) Pierre Ossman
[    1.102188] sdhci-pci 0000:00:10.0: SDHCI controller found [8086:2294] (rev 21)
[    1.105721] mmc0: SDHCI controller on PCI [0000:00:10.0] using ADMA
[    1.105892] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.106208] sdhci-pci 0000:00:12.0: SDHCI controller found [8086:2296] (rev 21)
[    1.107051] ACPI: \: failed to evaluate _DSM a53ec1f6-cd65-1f46-ab7a-29f7e8d5bd61 (0x1001)
[    1.107116] sdhci-pci 0000:00:12.0: failed to setup card detect gpio
[    1.107568] mmc1: SDHCI controller on PCI [0000:00:12.0] using ADMA
[    1.107741] wbsd: Winbond W83L51xD SD/MMC card interface driver
[    1.107746] wbsd: Copyright(c) Pierre Ossman
[    1.107826] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.108658] ledtrig-cpu: registered to indicate activity on CPUs
[    1.109045] efifb: probing for efifb
[    1.109077] efifb: framebuffer at 0x80000000, using 4160k, total 4160k
[    1.109085] efifb: mode is 1366x768x32, linelength=5504, pages=1
[    1.109091] efifb: scrolling: redraw
[    1.109094] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.109430] Console: switching to colour frame buffer device 170x48
[    1.113610] fb0: EFI VGA frame buffer device
[    1.115246] hid: raw HID events driver (C) Jiri Kosina
[    1.115418] usbcore: registered new interface driver usbhid
[    1.115425] usbhid: USB HID core driver
[    1.155440] NET: Registered PF_INET6 protocol family
[    1.160054] Segment Routing with IPv6
[    1.160097] In-situ OAM (IOAM) with IPv6
[    1.160164] mip6: Mobile IPv6
[    1.160197] NET: Registered PF_PACKET protocol family
[    1.161187] mpls_gso: MPLS GSO support
[    1.161751] microcode: sig=0x406c3, pf=0x1, revision=0x368
[    1.161801] microcode: Microcode Update Driver: v2.2.
[    1.161816] IPI shorthand broadcast: enabled
[    1.161873] sched_clock: Marking stable (1160010974, 1766750)->(1187541637, -25763913)
[    1.162381] registered taskstats version 1
[    1.162407] Loading compiled-in X.509 certificates
[    1.162995] zswap: loaded using pool lzo/zbud
[    1.164137] Key type .fscrypt registered
[    1.164143] Key type fscrypt-provisioning registered
[    1.166882] Btrfs loaded, crc32c=crc32c-generic, zoned=yes, fsverity=yes
[    1.170386] Key type encrypted registered
[    1.170409] AppArmor: AppArmor sha1 policy hashing enabled
[    1.172319] ima: secureboot mode disabled
[    1.172353] ima: Allocated hash algorithm: sha256
[    1.212927] ima: No architecture policies found
[    1.212980] evm: Initialising EVM extended attributes:
[    1.212984] evm: security.selinux
[    1.212988] evm: security.SMACK64 (disabled)
[    1.212991] evm: security.SMACK64EXEC (disabled)
[    1.212993] evm: security.SMACK64TRANSMUTE (disabled)
[    1.212995] evm: security.SMACK64MMAP (disabled)
[    1.213009] evm: security.apparmor
[    1.213012] evm: security.ima
[    1.213014] evm: security.capability
[    1.213017] evm: HMAC attrs: 0x1
[    1.232231] mmc0: new HS200 MMC card at address 0001
[    1.232688] mmcblk0: mmc0:0001 400073 14.7 GiB 
[    1.236486]  mmcblk0: p1 p2 p3
[    1.237147] mmcblk0boot0: mmc0:0001 400073 4.00 MiB 
[    1.238152] mmcblk0boot1: mmc0:0001 400073 4.00 MiB 
[    1.238972] mmcblk0rpmb: mmc0:0001 400073 4.00 MiB, chardev (244:0)
[    1.354170] usb 1-1: new low-speed USB device number 2 using xhci_hcd
[    1.506399] usb 1-1: New USB device found, idVendor=0461, idProduct=4d22, bcdDevice= 2.00
[    1.506435] usb 1-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    1.506453] usb 1-1: Product: USB Optical Mouse
[    1.511364] input: USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:0461:4D22.0001/input/input1
[    1.511887] hid-generic 0003:0461:4D22.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:14.0-1/input0
[    1.539878] clk: Disabling unused clocks
[    1.637796] usb 1-3: new high-speed USB device number 3 using xhci_hcd
[    1.645312] Freeing unused decrypted memory: 2036K
[    1.647558] Freeing unused kernel image (initmem) memory: 3016K
[    1.647875] Write protecting the kernel read-only data: 32768k
[    1.650263] Freeing unused kernel image (text/rodata gap) memory: 2032K
[    1.650685] Freeing unused kernel image (rodata/data gap) memory: 48K
[    1.721544] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.721899] x86/mm: Checking user space page tables
[    1.785938] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.785970] Run /init as init process
[    1.785975]   with arguments:
[    1.785977]     /init
[    1.785979]   with environment:
[    1.785981]     HOME=/
[    1.785987]     TERM=linux
[    1.785988]     BOOT_IMAGE=/short/vmlinuz
[    1.785990]     pmedia=atahd
[    1.785992]     pdrv=linux
[    1.785994]     psubdir=/short
[    1.785996]     pfix=fsck,fsckp,trim
[    1.785997]     TZ=PST8PDT,M3.2.0,M11.1.0
[    1.854267] usb 1-3: New USB device found, idVendor=2232, idProduct=1073, bcdDevice= 0.13
[    1.854279] usb 1-3: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    1.854283] usb 1-3: Product: Real HD WebCam
[    1.854286] usb 1-3: Manufacturer: Generic
[    1.854289] usb 1-3: SerialNumber: 200901010001
[    1.985901] usb 1-4: new full-speed USB device number 4 using xhci_hcd
[    2.136917] usb 1-4: New USB device found, idVendor=8087, idProduct=0a2a, bcdDevice= 0.01
[    2.136954] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.716380] block device autoloading is deprecated and will be removed.
[    2.716938] block device autoloading is deprecated and will be removed.
[    2.717445] block device autoloading is deprecated and will be removed.
[    2.717973] block device autoloading is deprecated and will be removed.
[    2.718494] block device autoloading is deprecated and will be removed.
[    2.718989] block device autoloading is deprecated and will be removed.
[    2.719478] block device autoloading is deprecated and will be removed.
[    2.719953] block device autoloading is deprecated and will be removed.
[    3.108332] EXT4-fs (mmcblk0p2): mounting ext3 file system using the ext4 subsystem
[    3.115491] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none.
[    6.508207] loop0: detected capacity change from 0 to 914568
[    6.524643] overlayfs: "xino" feature enabled using 2 upper inode bits.
[    8.885115] loop1: detected capacity change from 0 to 30784
[    8.901200] overlayfs: "xino" feature enabled using 3 upper inode bits.
[    8.912888] loop2: detected capacity change from 0 to 223784
[    8.927103] overlayfs: "xino" feature enabled using 3 upper inode bits.
[    8.938439] loop3: detected capacity change from 0 to 146688
[    8.950609] overlayfs: "xino" feature enabled using 4 upper inode bits.
[    8.962448] loop4: detected capacity change from 0 to 20944
[    8.976649] overlayfs: "xino" feature enabled using 4 upper inode bits.
[    8.987994] loop5: detected capacity change from 0 to 167192
[    8.999995] overlayfs: "xino" feature enabled using 4 upper inode bits.
[    9.115303] overlayfs: "xino" feature enabled using 4 upper inode bits.
[    9.741142] loop6: detected capacity change from 0 to 129064
[    9.760406] overlayfs: "xino" feature enabled using 4 upper inode bits.
[    9.934155] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[   10.273845] zsmalloc: module verification failed: signature and/or required key missing - tainting kernel
[   10.280091] zram: Added device: zram0
[   10.324489] zram0: detected capacity change from 0 to 3807168
[   10.357655] Adding 1903580k swap on /dev/zram0.  Priority:-2 extents:1 across:1903580k SSFS
[   12.266041] ACPI: AC: AC Adapter [AC] (on-line)
[   12.358240] Consider using thermal netlink events interface
[   12.370230] dw_dmac INTL9C60:00: DesignWare DMA Controller, 8 channels
[   12.410270] dw_dmac INTL9C60:01: DesignWare DMA Controller, 8 channels
[   12.647205] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/PNP0C09:00/PNP0C0D:00/input/input2
[   12.647279] ACPI: button: Lid Switch [LID0]
[   12.647454] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[   12.647901] ACPI: button: Power Button [PWRF]
[   13.283153] proc_thermal 0000:00:0b.0: can't derive routing for PCI INT A
[   13.283164] proc_thermal 0000:00:0b.0: PCI INT A: not connected
[   13.301052] rt5640 i2c-10EC5650:00: Device with ID register 0x6419 is not rt5640/39
[   13.391935] rt5645 i2c-10EC5650:00: Detected Google Chrome platform
[   13.391960] rt5645 i2c-10EC5650:00: supply avdd not found, using dummy regulator
[   13.392268] rt5645 i2c-10EC5650:00: supply cpvdd not found, using dummy regulator
[   13.592640] intel_sst_acpi 808622A8:00: LPE base: 0x91000000 size:0x200000
[   13.592652] intel_sst_acpi 808622A8:00: IRAM base: 0x910c0000
[   13.592682] intel_sst_acpi 808622A8:00: DRAM base: 0x91100000
[   13.592693] intel_sst_acpi 808622A8:00: SHIM base: 0x91140000
[   13.592707] intel_sst_acpi 808622A8:00: Mailbox base: 0x91144000
[   13.592715] intel_sst_acpi 808622A8:00: DDR base: 0x20000000
[   13.613942] intel_sst_acpi 808622A8:00: Got drv data max stream 25
[   13.665627] intel_sst_acpi 808622A8:00: firmware: direct-loading firmware intel/fw_sst_22a8.bin
[   13.676281] ACPI: bus type drm_connector registered
[   14.061866] pstore: Using crash dump compression: deflate
[   14.061877] pstore: Registered efi as persistent store backend
[   14.593516] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   14.608143] input: PC Speaker as /devices/platform/pcspkr/input/input4
[   14.763071] cfg80211: Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf'
[   14.763607] cfg80211: Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
[   14.764118] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   14.764621] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[   14.771109] platform regulatory.0: firmware: direct-loading firmware regulatory.db
[   14.771496] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s
[   14.914438] mc: Linux media interface: v0.10
[   14.909152] ACPI: battery: Slot [BAT0] (battery present)
[   14.912435] Intel(R) Wireless WiFi driver for Linux
[   15.379008] videodev: Linux video capture interface: v2.00
[   15.401259] iwlwifi 0000:02:00.0: firmware: direct-loading firmware iwlwifi-7265D-29.ucode
[   15.401304] iwlwifi 0000:02:00.0: Found debug destination: EXTERNAL_DRAM
[   15.401309] iwlwifi 0000:02:00.0: Found debug configuration: 0
[   15.438984] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[   15.443640] iwlwifi 0000:02:00.0: loaded firmware version 29.4063824552.0 7265D-29.ucode op_mode iwlmvm
[   15.541007] usb 1-3: Found UVC 1.00 device Real HD WebCam (2232:1073)
[   15.558924] input: Real HD WebCam: Real HD WebCam as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/input/input5
[   15.559015] usbcore: registered new interface driver uvcvideo
[   15.967828] Console: switching to colour dummy device 80x25
[   15.967907] i915 0000:00:02.0: vgaarb: deactivate vga console
[   15.989092] intel_rapl_common: Found RAPL domain package
[   15.989104] intel_rapl_common: Found RAPL domain core
[   16.062425] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
[   16.062885] ACPI: video: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   16.063019] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[   16.063225] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   16.468390] cht-bsw-rt5645 cht-bsw-rt5645: quirk PMC_PLT_CLK_0 enabled
[   16.595371] input: chtrt5650 Headset as /devices/pci0000:00/808622A8:00/cht-bsw-rt5645/sound/card1/input7
[   16.895524] fbcon: i915drmfb (fb0) is primary device
[   18.138522] Console: switching to colour frame buffer device 170x48
[   18.157253] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[   18.176395] iTCO_vendor_support: vendor-support=0
[   18.187678] iTCO_wdt iTCO_wdt.1.auto: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
[   18.342502] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   18.342625] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   18.342753] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   18.443386] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 7265, REV=0x210
[   18.443555] thermal thermal_zone7: failed to read out thermal zone (-61)
[   18.459685] iwlwifi 0000:02:00.0: Applying debug destination EXTERNAL_DRAM
[   18.463425] iwlwifi 0000:02:00.0: Allocated 0x00400000 bytes for firmware monitor.
[   18.472505] iwlwifi 0000:02:00.0: base HW address: 00:21:5c:bf:bc:83, OTP minor version: 0x0
[   18.538155] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[   19.082062] Bluetooth: Core ver 2.22
[   19.082143] NET: Registered PF_BLUETOOTH protocol family
[   19.082147] Bluetooth: HCI device and connection manager initialized
[   19.082159] Bluetooth: HCI socket layer initialized
[   19.082164] Bluetooth: L2CAP socket layer initialized
[   19.082178] Bluetooth: SCO socket layer initialized
[   19.110222] usbcore: registered new interface driver btusb
[   19.150435] Bluetooth: hci0: Legacy ROM 2.5 revision 1.0 build 3 week 17 2014
[   19.158443] bluetooth hci0: firmware: direct-loading firmware intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
[   19.158464] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
[   19.543464] Bluetooth: hci0: Intel BT fw patch 0x32 completed & activated
[   25.378330] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   25.378342] Bluetooth: BNEP filters: protocol multicast
[   25.378353] Bluetooth: BNEP socket layer initialized
[   25.382838] Bluetooth: MGMT ver 1.22
[   25.398664] NET: Registered PF_ALG protocol family
[   25.704940] iwlwifi 0000:02:00.0: Applying debug destination EXTERNAL_DRAM
[   25.784310] iwlwifi 0000:02:00.0: Applying debug destination EXTERNAL_DRAM
[   25.785748] iwlwifi 0000:02:00.0: FW already configured (0) - re-configuring
[   26.063867] wlan0: authenticate with 3e:2d:9e:a8:51:32
[   26.071984] wlan0: send auth to 3e:2d:9e:a8:51:32 (try 1/3)
[   26.100821] wlan0: authenticate with 3e:2d:9e:a8:51:32
[   26.100841] wlan0: send auth to 3e:2d:9e:a8:51:32 (try 1/3)
[   26.104332] wlan0: authenticated
[   26.106170] wlan0: associate with 3e:2d:9e:a8:51:32 (try 1/3)
[   26.114363] wlan0: RX AssocResp from 3e:2d:9e:a8:51:32 (capab=0x1011 status=0 aid=18)
[   26.126152] wlan0: associated
[   26.134140] wlan0: Limiting TX power to 30 (30 - 0) dBm as advertised by 3e:2d:9e:a8:51:32
[   26.250835] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   60.257838] intel_sst_acpi 808622A8:00: FW Version 01.0b.02.02
[   60.344944]  Audio Port: ASoC: no backend DAIs enabled for Audio Port
[   60.344967]  Audio Port: ASoC: error at dpcm_fe_dai_prepare on Audio Port: -22
[   60.345668]  Audio Port: ASoC: no backend DAIs enabled for Audio Port
[   60.345687]  Audio Port: ASoC: error at dpcm_fe_dai_prepare on Audio Port: -22
[   60.346604]  Audio Port: ASoC: no backend DAIs enabled for Audio Port
[   60.346620]  Audio Port: ASoC: error at dpcm_fe_dai_prepare on Audio Port: -22
[   60.347951]  Audio Port: ASoC: no backend DAIs enabled for Audio Port
[   60.347965]  Audio Port: ASoC: error at dpcm_fe_dai_prepare on Audio Port: -22
[   60.348398]  Audio Port: ASoC: no backend DAIs enabled for Audio Port
[   60.348409]  Audio Port: ASoC: error at dpcm_fe_dai_prepare on Audio Port: -22
[   60.348645]  Audio Port: ASoC: no backend DAIs enabled for Audio Port
[   60.348654]  Audio Port: ASoC: error at dpcm_fe_dai_prepare on Audio Port: -22
[   60.350992]  Audio Port: ASoC: no backend DAIs enabled for Audio Port
[   60.351009]  Audio Port: ASoC: error at dpcm_fe_dai_prepare on Audio Port: -22
[   60.351743]  Audio Port: ASoC: no backend DAIs enabled for Audio Port
[   60.351757]  Audio Port: ASoC: error at dpcm_fe_dai_prepare on Audio Port: -22
[   60.352202]  Audio Port: ASoC: no backend DAIs enabled for Audio Port
[   60.352213]  Audio Port: ASoC: error at dpcm_fe_dai_prepare on Audio Port: -22
[   60.355236]  Audio Port: ASoC: no backend DAIs enabled for Audio Port
[   60.355253]  Audio Port: ASoC: error at dpcm_fe_dai_prepare on Audio Port: -22
[   60.356284]  Audio Port: ASoC: no backend DAIs enabled for Audio Port
[   60.356306]  Audio Port: ASoC: error at dpcm_fe_dai_prepare on Audio Port: -22
[   60.357059]  Audio Port: ASoC: no backend DAIs enabled for Audio Port
[   60.357073]  Audio Port: ASoC: error at dpcm_fe_dai_prepare on Audio Port: -22
[   60.399476]  Deep-Buffer Audio Port: ASoC: no backend DAIs enabled for Deep-Buffer Audio Port
[   60.399506]  Deep-Buffer Audio Port: ASoC: error at dpcm_fe_dai_prepare on Deep-Buffer Audio Port: -22
[   60.400385]  Deep-Buffer Audio Port: ASoC: no backend DAIs enabled for Deep-Buffer Audio Port
[   60.400409]  Deep-Buffer Audio Port: ASoC: error at dpcm_fe_dai_prepare on Deep-Buffer Audio Port: -22
[   60.400931]  Deep-Buffer Audio Port: ASoC: no backend DAIs enabled for Deep-Buffer Audio Port
[   60.400951]  Deep-Buffer Audio Port: ASoC: error at dpcm_fe_dai_prepare on Deep-Buffer Audio Port: -22
[   60.403879]  Deep-Buffer Audio Port: ASoC: no backend DAIs enabled for Deep-Buffer Audio Port
[   60.403892]  Deep-Buffer Audio Port: ASoC: error at dpcm_fe_dai_prepare on Deep-Buffer Audio Port: -22
[   60.404249]  Deep-Buffer Audio Port: ASoC: no backend DAIs enabled for Deep-Buffer Audio Port
[   60.404259]  Deep-Buffer Audio Port: ASoC: error at dpcm_fe_dai_prepare on Deep-Buffer Audio Port: -22
[   60.404450]  Deep-Buffer Audio Port: ASoC: no backend DAIs enabled for Deep-Buffer Audio Port
[   60.404457]  Deep-Buffer Audio Port: ASoC: error at dpcm_fe_dai_prepare on Deep-Buffer Audio Port: -22
[   60.405995]  Deep-Buffer Audio Port: ASoC: no backend DAIs enabled for Deep-Buffer Audio Port
[   60.406081]  Deep-Buffer Audio Port: ASoC: error at dpcm_fe_dai_prepare on Deep-Buffer Audio Port: -22
[   60.407005]  Deep-Buffer Audio Port: ASoC: no backend DAIs enabled for Deep-Buffer Audio Port
[   60.407018]  Deep-Buffer Audio Port: ASoC: error at dpcm_fe_dai_prepare on Deep-Buffer Audio Port: -22
[   60.407383]  Deep-Buffer Audio Port: ASoC: no backend DAIs enabled for Deep-Buffer Audio Port
[   60.407391]  Deep-Buffer Audio Port: ASoC: error at dpcm_fe_dai_prepare on Deep-Buffer Audio Port: -22
[   60.409481]  Deep-Buffer Audio Port: ASoC: no backend DAIs enabled for Deep-Buffer Audio Port
[   60.409495]  Deep-Buffer Audio Port: ASoC: error at dpcm_fe_dai_prepare on Deep-Buffer Audio Port: -22
[   60.410681]  Deep-Buffer Audio Port: ASoC: no backend DAIs enabled for Deep-Buffer Audio Port
[   60.410697]  Deep-Buffer Audio Port: ASoC: error at dpcm_fe_dai_prepare on Deep-Buffer Audio Port: -22
[   60.411382]  Deep-Buffer Audio Port: ASoC: no backend DAIs enabled for Deep-Buffer Audio Port
[   60.411395]  Deep-Buffer Audio Port: ASoC: error at dpcm_fe_dai_prepare on Deep-Buffer Audio Port: -22
[   60.440425] Bluetooth: RFCOMM TTY layer initialized
[   60.440467] Bluetooth: RFCOMM socket layer initialized
[   60.440510] Bluetooth: RFCOMM ver 1.11
#

[mcman56]

It is interesting to see those audio port failures because I suspected my trouser freezes were related to audio. Logs I looked at suggested a link but ti was over my head.

[clm1919]

Not that I think it is related but since converting from chromebook I have had one issue across all versions of linux tried. Running any browser, the CPU will go to 100% and the whole system will lock up. Some times it is right away and sometimes it will run for a while.

I believe that model chromebook has a dual core braswell cpu - and 4 GB or RAM - and your zram seems maxed (from the above post) - Even Firefox might stress those settings.

You might want to try waterfox - it seems to run a little better than firefox on my chromebooks with dual cores and 4gb of RAM.

I realize that's not going to help your touchpad issue. But if if the chromebook is going to be used along with other machines (and not solo) you might want to try barrier (a software KVM switch) and just control it via another machine.

For the two chromebooks I have with bad touchpads and/or keyboards I use them as "smart monitors" using barrier

[bigpup]

@mcman56

The touchpad worked in lubuntu with Linux version 5.15.0-119-generic

Can you still boot with this and find out what exact touchpad it is?

Some information program that will provide specific make and model info.

BookwormPup64 has Pup-sysinfo program.

Pup-Sysinfo ->Devices ->Input ->Complete

But not sure it will show anything about yours, if driver or firmware is needed.

Anyway, at least knowing what manufacture it is will be some help to figure out what is needed.

What you have already posted indicates the driver and or firmware is needed.

But cannot offer it, if no info on exactly what touchpad it is.

[mcman56]

The box is a:
Samsung Chromebook 3 (Intel Celeron N3050, Braswell dual core @ 1.6GHz, Memory: 2GB, Wi-Fi: 802.11ac dual band (2.4GHz, 5GHz)
Samsung Model code: XE500C13-K01us
It has the Mrchromebook Eufi

Amazon suggests that the touch pad is a "Laptop Touchpad Module Board BA41-02470A BA41-02470B".
Laptop Touchpad Module Board BA41-02470A BA41-02470B Compatible Replacement Spare Part for Samsung Chromebook 3 XE500C13 XE501C13 Series.

Part Number: BA41-02470A BA41-02470B
Compatible Part Numbers: BA59-04087A BA59-04087B BA92-15671A BA92-15671B BA590-4087A BA590-4087B
Compatible Models: Samsung Chromebook 3 XE500C13 (XE500C13-K01US, XE500C13-K02US, XE500C13-K03US, XE500C13-K04US, XE500C13-K05US, XE500C13-K06US, XE500C13-S01US, XE500C13-S02US, XE500C13-S03US); XE501C13 (XE501C13-K01US) Series
Color: Black
Type: Touchpad Board

It worked in lubuntu 22.04. It also works in EasyOS but I have other issues with EasyOS.

[bigpup]

In BookwormPup64 run this in a terminal.

Code: Select all

xinput list-props 11

Post the results.

Here is how to copy from a terminal:
https://forum.puppylinux.com/viewtopic.php?t=1604

[mcman56]

All I get is "unable to find device 11".

I have been experimenting and the present state is:
1. Touch pad does not work in BookwormPup64. Plug in mouse does.
2. Touchpad and keyboard do not work in Fosspup64. Plug in keyboard and mouse do work.
3. Both work in Lubuntu 22.04.4 loaded on hard drive. I got the same "unable to find device 11" when running.

Maybe I have an intermittent hardware issue or a weird chromebook thing..

[bigpup]

I was hoping that xinput list-props 11 would be able to give some information.

Well it does tell us what is needed to turn it on is not there or not activating.

I am still looking around for any info that may help you.

-----------------------------------------------------------------------------------------------------------------------------------------------

I got one better with my HP Chromebook 14.

It has a elan touchpad and seems to be correct driver is found and loaded.
The synaptic software driver is able to access it and have a full options available for settings.
xinput list-props 11 provides a full output of information about it and settings for it.

But the touchpad does not work.

All over the internet is the same issue, with a lot of different Linux operating systems.
So far, nothing they say will fix their Linux OS, works in Puppy Linux.

Chromebooks are not normal computers and I think their motherboards are setup to only fully support Chrome OS or the computer manufactures version of Chrome OS.

But it could also be the Linux kernel config, when the kernel was compiled.
There are hundreds of options for how the kernel is setup to support different hardware.
This kernel config is a black art to figure out what to allow, not allow, etc..............

I like using a mouse anyway, so I am not too worried about getting the touchpad working.
I most likely would just turn it off anyway.

BookwormPup64 10.0.7 was the first Puppy version, that had sound working from the first boot up.
Nothing needed but set sound volume level.

With all the issues other Puppy versions had, getting sound to work. This is a big deal!
.
.

[bigpup]

You wrote this in a previous post.

It worked in lubuntu 22.04. It also works in EasyOS but I have other issues with EasyOS.

So , could you boot up EasyOS and run

Code: Select all

xinput list-props 11

[dimkr]

If you share the output of lsmod and dmesg from two distros, one where touchpad works and one where it doesn't, this can be fixed in minutes.

[mcman56]

Installing EasyOS seems above my skill set and a USB stick protruding from a lap top is undesirable.

files are attached.

[mcman56]

It only allowed to to attach three.

[dimkr]

@mcman56 This is weird, I see the required driver is there but not loaded for some reason. Can you modprobe configs; zcat /proc/config.gz in the Lubuntu installation where the touchpad works?

EDIT: I think I found the difference, CONFIG_CROS_EC_LPC=n in Debian but it's CONFIG_CROS_EC_LPC=m in Ubuntu, and this is the missing driver

EDIT 2: @radky - I fixed this for Vanilla Dpup in https://github.com/vanilla-dpup/woof-CE ... ec65d768b7 and from now and on Vanilla Dpup 10.0.x is going to take the kernel from https://github.com/vanilla-dpup/woof-CE ... kernel.yml instead, feel free to backport this fix to puppylinux-woof-CE/woof-CE if you want (I'm not going to do that)

EDIT 3: Vanilla Dpup 10.0.61 will be (hopefully) released today with this missing driver included. I don't know if and when other Puppy releases receive this fix but from what I see this driver is indeed disabled in the vast majority

Code: Select all

$ fgrep -r CONFIG_CROS_EC_LPC
kernel-kit/configs_x86/DOTconfig-5.15.4-i686-pae:# CONFIG_CROS_EC_LPC is not set
kernel-kit/configs_x86/DOTconfig-6.1.52-x86:# CONFIG_CROS_EC_LPC is not set
kernel-kit/configs_x86/DOTconfig-6.6.2-x86:# CONFIG_CROS_EC_LPC is not set
kernel-kit/configs_x86_64/DOTconfig-5.15.4-x86_64:# CONFIG_CROS_EC_LPC is not set
kernel-kit/configs_x86_64/DOTconfig-6.1.13-x86_64:CONFIG_CROS_EC_LPC=m
kernel-kit/configs_x86_64/DOTconfig-6.6.2-x86_64:CONFIG_CROS_EC_LPC=m

[mcman56]

dan@dan-celes:~$ modprobe configs; zcat /proc/config.gz
modprobe: FATAL: Module configs not found in directory /lib/modules/6.8.0-40-generic
gzip: /proc/config.gz: No such file or directory
dan@dan-celes:~$

[dimkr]

@mcman56 Thanks, 10.0.61 (or later) from https://github.com/vanilla-dpup/releases/releases should fix the issue

[rockedge]

I don't know if and when other Puppy releases receive this fix but from what I see this driver is indeed disabled in the vast majority

The stock F96-CE_4 kernel 6.0.12 has this configured as a module. Wonder if it works in F96-CE_4?

Code: Select all

CONFIG_CHROMEOS_LAPTOP=m
CONFIG_CHROMEOS_PSTORE=m
CONFIG_CHROMEOS_TBMC=m
CONFIG_CROS_EC=m
CONFIG_CROS_EC_I2C=m
CONFIG_CROS_EC_ISHTP=m
CONFIG_CROS_EC_SPI=m
CONFIG_CROS_EC_LPC=m
CONFIG_CROS_EC_PROTO=y

[mcman56]

All works in Vanilladpup64 10.0.61