icake Chinese language pets

[icake]

duplicated entry, deleted Jun 1, 2024

[icake]

peebee released NoblePup32-24.04+A0.iso (358 MB) on Feb 8, 2024 and delta to A2 on Mar 6, 2024

for more information and discussions

download NoblePup32-24.04+A0.iso (358 MB)

I have created 7 half-Chinese language txzes for noblepup32 24.04 A0 and A2:
fcitx Chinese input platform: fcitx_4.2.7-en-zh-raring-20.0.6.pet (21 mb)
gcin Chinese input platform: gcin32_2.8.2-en-zh-raring-20.0.6.pet (5 mb)
hime Chinese input platform: hime32_0.9.11-en-zh-raring-20.0.6.pet (5 mb)
ibus Chinese input platform: ibus32_1.5.17-en-zh-raring-20.0.6.pet (36 mb)
rime Chinese input platform: ibus32-rime_1.2-en-zh-raring-20.0.6.pet (130 mb)
scim Chinese input platform: scim_1.4.14-en-zh-raring-20.0.6.pet (15 mb)
yong Chinese input platform: yong32_2.5.0-en-zh-raring-20.0.6.pet (10 mb)

Plus 2 Chinese language pets each for noblepup32 24.04 A0 and A2:
Simplified Chinese:
noblepup32-24.04.A0-zhcn-20.0.6.pet (4 mb)
noblepup32-24.04.A2-zhcn-20.0.6.pet (4 mb)

Traditional Chinese:
noblepup32-24.04.A0-zhhk-20.0.6.pet (3 mb)
noblepup32-24.04.A2-zhhk-20.0.6.pet (3 mb)

To use:
(a) any 1 of the 7 half-Chinese language pets will enable you to display and input Chinese in noblepup32 24.04 A0 and A2

(b) the 2 name+version number corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for noblepup32 24.04 A0 and A2. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

more information about the fcitx, gcin, hime, ibus, ibus-rime, scim and yong pets, please see:
Documentation-and-Tools

[icake]

IdfbAn released NoblePup64 Alpha 2 on Feb 5, 2024

for more information and discussions

download alpha 2 iso: noblepup64.10.0.iso (915 mb)

I have created 7 half-Chinese language pets for NoblePup64 Alpha 2:
fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-23.1.1.pet (19 mb)
gcin Chinese input platform: gcin64_2.8.2-en-zh-bionic-23.1.1.pet (5 mb)
hime Chinese input platform: hime64_0.9.11-en-zh-bionic-23.1.1.pet (5 mb)
ibus Chinese input platform: ibus64_1.5.23-en-zh-bionic-23.1.1.pet (55 mb)
rime Chinese input platform: ibus64-rime_1.4.0-en-zh-bionic-23.1.1.pet (114 mb)
scim Chinese input platform: scim64_1.4.9-en-zh-bionic-23.1.1.pet (14 mb)
yong Chinese input platform: yong64_2.5.0-en-zh-bionic-23.1.1.pet (10 mb)

Plus 2 Chinese language pets each for NoblePup64 Alpha 2:
Simplified Chinese: noblepup64-10.0.a2-zhcn-23.1.1.pet (4 mb)
Traditional Chinese: noblepup64-10.0.a2-zhcn-23.1.1.pet (3 mb)

To use:
(a) any 1 of the 7 half-Chinese language pets will enable you to display and input Chinese in NoblePup64 Alpha 2

(b) the 2 name+version number corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for NoblePup64 Alpha 2. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

more information about these half-Chinese and Chinese pets, please see: Documentation-and-Tools

[icake]

peebee recently released LxPupSc64-23.01+6-T and LxPupSc32-23.01+6-T-k64 （Feb 23, 2024）

more information and discussions for LxPupSc64-23.01+6-T
more information and discussions for LxPupSc32-23.01+6-T-k64

download LxPupSc64-23.01+6-T.iso (378 mb)
download LxPupSc32-23.01+6-T-k64.iso (378 mb)

I have created 6 half-Chinese language pets each for LxPupSc64-23.01+6-T and LxPupSc32-23.01+6-T-k64:
LxPupSc64-23.01+6-T:
fcitx Chinese input platform: fcitx64_4.2.7-en-zh-bionic-21.3.8.pet (17 mb)
gcin Chinese input platform: gcin64_2.8.2-en-zh-bionic-21.3.8.pet (7 mb)
hime Chinese input platform: hime64_0.9.11-en-zh-bionic-21.3.8.pet (6 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.3.8.pet (37 mb)
scim Chinese input platform: scim64_1.4.14-en-zh-bionic-21.3.8.pet (17 mb)
yong Chinese input platform: yong64_2.5.0-en-zh-bionic-21.3.8.pet (10 mb)

LxPupSc32-23.01+6-T-k64:
fcitx Chinese input platform: fcitx32_4.2.7-en-zh-raring-14.4.9.pet (22 mb)
gcin Chinese input platform: gcin32_2.8.2-en-zh-raring-14.4.9.pet (11 mb)
hime Chinese input platform: hime32_0.9.11-en-zh-raring-14.4.9.pet (18 mb)
ibus Chinese input platform: ibus32_1.5.17-en-zh-raring-14.4.9.pet (41 mb)
scim Chinese input platform: scim32_1.4.14-en-zh-raring-14.4.9.pet (16 mb)
yong Chinese input platform: yong32_2.5.0-en-zh-raring-14.4.9.pet (10 mb)

Plus 2 Chinese language pets each for LxPupSc64-23.01+4-T and LxPupSc32-23.01+4-T-k64:
Simplified Chinese: lxpupsc64-23.01.06T-zhcn-21.3.8.pet (4 mb)
lxpupsc32-23.01.06Tk64-zhcn-14.4.9.pet (4 mb)

Traditional Chinese:
lxpupsc64-23.01.06T-zhhk-21.3.8.pet (3 mb)
lxpupsc32-23.01.06Tk64-zhhk-14.4.9.pet (3 mb)

To use:
(a) any 1 of the half-Chinese language pets will enable you to display and input Chinese in LxPupSc64-23.01+6-T (please use the 21.3.8 pets) and LxPupSc32-23.01+6-T-k64 (please use the 14.4.9 pets)

(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for LxPupSc64-23.01+6-T and LxPupSc32-23.01+6-T-k64. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

more information about these half-Chinese and Chinese pets, please see: Documentation-and-Tools

[icake]

peebee released NoblePup32-24.04+A3.iso (362 MB) on Mar 28, 2024

for more information and discussions

download NoblePup32-24.04+A3.iso (362 MB)

I have created 7 half-Chinese language txzes for noblepup32 24.04 A3:
fcitx Chinese input platform: fcitx_4.2.9-en-zh-bionic-20.2.6.pet (27 mb)
gcin Chinese input platform: gcin32_2.8.2-en-zh-bionic-20.2.6.pet (6 mb)
hime Chinese input platform: hime32_0.9.11-en-zh-bionic-20.2.6.pet (6 mb)
ibus Chinese input platform: ibus32_1.5.17-en-zh-bionic-20.2.6.pet (37 mb)
rime Chinese input platform: ibus32-rime_1.2-en-zh-bionic-20.2.6.pet (112 mb)
scim Chinese input platform: scim_1.4.14-en-zh-bionic-20.2.6.pet (16 mb)
yong Chinese input platform: yong32_2.5.0-en-zh-bionic-20.2.6.pet (10 mb)

Plus 2 Chinese language pets each for noblepup32 24.04 A3:
Simplified Chinese: noblepup32-24.04.A3-zhcn-20.2.6.pet (4 mb)

Traditional Chinese: noblepup32-24.04.A3-zhhk-20.2.6.pet (3 mb)

To use:
(a) any 1 of the 7 half-Chinese language pets will enable you to display and input Chinese in noblepup32 24.04 A3

(b) the 2 name+version number corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for noblepup32 24.04 A3. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

more information about these half-Chinese and Chinese pets, please see: Documentation-and-Tools

[icake]

Further to the Chinese txzes (version 321.0.6) for Fatdog64-901 released on Oct 15, 2023, I have upgraded them to version 321.6.1 to enable Chinese support on more applications. Known limitations for version 321.6.1:

1. No Chinese support in urxvt for fcitx, gcin, hime, ibus, rime and scim. To enable Chinese support in console, I have added lxterm in all 7 input platforms.

2. No Chinese support in yong for geany, LibreOffice 7.5.2.2 and seamonkey 2.53.15

I. icake language txzes:
I have created 7 half-Chinese language txzes for fatdog64-901:
fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-321.6.1.txz (26 mb)
gcin Chinese input platform: gcin64_2.9.0-en-zh-bionic-321.6.1.txz (10 mb)
hime Chinese input platform: hime64_0.9.11-en-zh-bionic-321.6.1.txz (10 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-321.6.1.txz (56 mb)
rime Chinese input platform: ibus64-rime_1.4.0-en-zh-bionic-321.6.1.txz (79 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-321.6.1.txz (15 mb)
yong Chinese input platform: yong64_2.5.0-en-zh-bionic-321.6.1.txz (10 mb)

Plus 2 Chinese language txzes each for fatdog64-901:
Simplified Chinese: fatdog64-901-zhcn-321.6.1.txz (4 mb)

Traditional Chinese: fatdog64-901-zhcn-321.6.1.txz (3 mb)

To use:
(a) any 1 of the 7 half-Chinese language txzes will enable you to display and input Chinese in fatdog64-901

(b) the 2 Chinese language txzes will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for fatdog64-901. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

II. icake combo txz
I have also created an icake combo txz for fatdog64-901 with all 7 Chinese input platforms above and 3 user interface languages:
icake64-fatdog64-901-combo-est-fghirsy.321.6.1.txz (216 mb)

III. icake combo live iso
I have also remastered 1 icake combo live iso based on fatdog64-901 with all 7 Chinese input platforms above and 3 user interface languages:
icake64-Fatdog64-901-20240503-est-fghirsy.iso (875 mb)

so the total number of different systems created by the above icake combo txz and combo live iso is 21:
21 = 7 Chinese input platforms (fcitx, gcin, hime, ibus, rime, scim or yong) X 3 user interface languages (English, Simplified Chinese and Traditional Chinese)

more information about the fcitx, gcin, hime, ibus, scim and yong txzes, please see: Documentation-and-Tools

[icake]

friendly-jammy32-rc2.iso was released by wiard on May 2, 2024

more information and discussions for friendly-jammy32-rc1.iso

download friendly-jammy32-rc2.iso (607 mb)

I have created 7 half-Chinese language pets for friendly-jammy32-rc2:
1. fcitx Chinese input platform: fcitx32_4.2.9-en-zh-bionic-20.1.5.pet (24 mb)
2. gcin Chinese input platform: gcin32_2.8.2-en-zh-bionic-20.1.5.pet (5 mb)
3. hime Chinese input platform: hime32_0.9.11-en-zh-bionic-20.1.5.pet (5 mb)
4. ibus Chinese input platform: ibus32_1.5.17-en-zh-bionic-20.1.5.pet (50 mb)
5. rime Chinese input platform: ibus32-rime_1.2-en-zh-bionic-20.1.5.pet (125 mb)
6. scim Chinese input platform: scim32_1.4.18-en-zh-bionic-20.1.5.pet (14 mb)
7. yong Chinese input platform: yong32_2.5.0-en-zh-bionic-20.1.5.pet (10 mb)

Plus 2 Chinese language pets each for friendly-jammy32-rc2:
1. Simplified Chinese: friendly-jammy32-rc2-zhcn-20.1.5.pet (4 mb)

2. Traditional Chinese: friendly-jammy32-rc2-zhhk-20.1.5.pet (3 mb)

To use:
(a) any 1 of the 7 half-Chinese language pets will enable you to display and input Chinese in friendly-jammy32-rc2

(b) the name+version number corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for friendly-jammy32-rc2. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

for more information about the fcitx, gcin, hime, ibus, rime, scim and yong half-Chinese pets, please see the first posting of this subject

[icake]

BarryK released EasyOS Kirkstone-series version 5.8.1 on May 13, 2024; EasyVoid version 240308 pre-alpha on Mar 8, 2024

for more information and discussions about EasyOS kirkstone
for more information and discussions about EasyOS Void

download easy-5.8.1-amd64.img (877 mb)
download easy-240308-amd64.img (935 mb)

I have created 6 half-Chinese language pets for EasyOS Kirkstone-series version 5.8.1 and EasyVoid 240308 pre-alpha:
fcitx Chinese input platform: fcitx64_4.2.7-en-zh-bionic-21.2.7.pet (16 mb)
gcin Chinese input platform: gcin64_2.9.0-en-zh-bionic-21.2.7.pet (10 mb)
hime Chinese input platform: hime64_0.9.11-en-zh-bionic-21.2.7.pet (8 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.2.7.pet (35 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-21.2.7.pet (10 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-21.2.7.pet (10 mb)

Plus 2 Chinese language pets each for EasyOS Kirkstone-series version 5.8.1 and EasyVoid 240308 pre-alpha:
Simplified Chinese:
easykirkstone-5.8.1-zhcn-21.2.7.pet (4 mb)
easycurrent-240308-zhcn-21.2.7.pet (4 mb)

Traditional Chinese:
easykirkstone-5.8.1-zhhk-21.2.7.pet (4 mb)
easycurrent-240308-zhhk-21.2.7.pet (4 mb)

To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in EasyOS Kirkstone-series version 5.8.1 and EasyVoid 240308 pre-alpha

(b) the 2 name+version number corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for EasyOS Kirkstone-series version 5.8.1 and EasyVoid 240308 pre-alpha. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

more information about the fcitx, gcin, hime, ibus, scim and yong pets, please see the first posting of this subject

[icake]

friendly-bionic32-v1.1 was released by wiard on May 2, 2024

more information and discussions for friendly-bionic32-v1.1

download friendly-bionic32-v1.1.iso (528 mb)

I have created 6 half-Chinese language pets for friendly bionic32 v1.1:
fcitx Chinese input platform: fcitx32_4.2.7-en-zh-bionic-20.0.5.pet (32 mb)
gcin Chinese input platform: gcin32_2.8.2-en-zh-bionic-20.0.5.pet (5 mb)
hime Chinese input platform: hime32_0.9.10-en-zh-bionic-20.0.5.pet (5 mb)
ibus Chinese input platform: ibus32_1.5.17-en-zh-bionic-20.0.5.pet (61 mb)
scim Chinese input platform: scim32_1.4.18-en-zh-bionic-20.0.5.pet (25 mb)
yong Chinese input platform: yong32_2.5.0-en-zh-bionic-20.0.5.pet (9 mb)

Plus 2 Chinese language pets each for friendly bionic32 v1.1:
Simplified Chinese: friendly-bionicpup-v1.1-zhcn-20.0.5.pet (4 mb)

Traditional Chinese: friendly-bionicpup-v1.1-zhhk-20.0.5.pet (3 mb)

To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in friendly bionic32 v1.1

(b) the name+version number corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for friendly bionic32 v1.1. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

more information about the fcitx, gcin, hime, ibus, scim and yong pets, please see:
Documentation-and-Tools

[icake]

ozsouth released s15pup64-22.12-240323-ovrly-6.iso on May 23, 2024

for more information and discussions

download s15pup64-22.12-240323-ovrly-6.iso (420 mb)

I have created 6 half-Chinese language txzes for S15Pup64 22.12-231231:
fcitx Chinese input platform: fcitx64_4.2.7-en-zh-raring-14.0.10.pet (16 mb)
gcin Chinese input platform: gcin64_2.8.2-en-zh-raring-14.0.10.pet (7 mb)
hime Chinese input platform: hime64_0.9.11-en-zh-raring-14.0.10.pet (7 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-raring-14.0.10.pet (56 mb)
scim Chinese input platform: scim64_1.4.14-en-zh-raring-14.0.10.pet (13 mb)
yong Chinese input platform: yong64_2.5.0-en-zh-raring-14.0.10.pet (10 mb)

Plus 2 Chinese language pets each for s15pup64-22.12-240323-ovrly-6:
Simplified Chinese: s15pup64-22.12-240323.ovrly.6-zhcn-14.0.9.pet (4 mb)

Traditional Chinese: s15pup64-22.12-240323.ovrly.6-zhhk-14.0.9.pet (3 mb)

To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in s15pup64-22.12-240323-ovrly-6

(b) the 2 name+version number corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for s15pup64-22.12-240323-ovrly-6. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

more information about the fcitx, gcin, hime, ibus, scim and yong pets, please see:
Documentation-and-Tools

[icake]

dimkr released Vanilla Dpup x86_64 9.3.39 and 10.0.50

more information: viewtopic.php?t=7420

download isoes: [/url]https://vanilla-dpup.github.io[/url]

I have created 6 half-Chinese language pets for Vanilla Dpup x86_64 9.3.39:
fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-21.2.2.pet (19 mb)
gcin Chinese input platform: gcin64_2.8.2-en-zh-bionic-21.2.2.pet (5 mb)
hime Chinese input platform: hime64_0.9.11-en-zh-bionic-21.2.2.pet (5 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.2.2.pet (36 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-21.2.2.pet (14 mb)
yong Chinese input platform: yong64_2.5.0-en-zh-bionic-21.2.2.pet (10 mb)

and for Vanilla Dpup x86_64 10.0.50:
fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-21.5.1.pet (19 mb)
gcin Chinese input platform: gcin64_2.8.2-en-zh-bionic-21.5.1.pet (5 mb)
hime Chinese input platform: hime64_0.9.11-en-zh-bionic-21.5.1.pet (5 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.5.1.pet (39 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-21.5.1.pet (14 mb)
yong Chinese input platform: yong64_2.5.0-en-zh-bionic-21.5.1.pet (10 mb)

Plus 2 Chinese language pets each for Vanilla Dpup x86_64 9.3.39 and 10.0.50:
Simplified Chinese:
vanilladpup64-9.3.39-zhcn-21.2.2.pet (4 mb)
vanilladpup64-10.0.50-zhcn-21.5.1.pet (4 mb)

Traditional Chinese:
vanilladpup64-9.3.39-zhhk-21.2.2.pet (3 mb)
vanilladpup64-10.0.50-zhhk-21.5.1.pet (3 mb)

To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in Vanilla Dpup x86_64 9.3.39 and 10.0.50

(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for Vanilla Dpup x86_64 9.3.39 and 10.0.50. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

more information about the fcitx, gcin, hime, ibus, scim and yong pets, please see:
Documentation-and-Tools

[icake]

dimkr released Vanilla Dpup x86_32 9.3.39 and 10.0.50

more information: viewtopic.php?t=7420

download isoes: [/url]https://vanilla-dpup.github.io[/url]

I have created 6 half-Chinese language pets for Vanilla Dpup x86_32 9.3.39:
fcitx Chinese input platform: fcitx32_4.2.9-en-zh-bionic-20.2.3.pet (23 mb)
gcin Chinese input platform: gcin32_2.8.2-en-zh-bionic-20.2.3.pet (5 mb)
hime Chinese input platform: hime32_0.9.11-en-zh-bionic-20.2.3.pet (5 mb)
ibus Chinese input platform: ibus32_1.5.19-en-zh-bionic-20.2.3.pet (51 mb)
scim Chinese input platform: scim32_1.4.18-en-zh-bionic-20.2.3.pet (13 mb)
yong Chinese input platform: yong32_2.5.0-en-zh-bionic-20.2.3.pet (10 mb)

and for Vanilla Dpup x86_32 10.0.50:
fcitx Chinese input platform: fcitx32_4.2.9-en-zh-bionic-20.2.4.pet (24 mb)
gcin Chinese input platform: gcin32_2.8.2-en-zh-bionic-20.2.4.pet (5 mb)
hime Chinese input platform: hime32_0.9.11-en-zh-bionic-20.2.4.pet (5 mb)
ibus Chinese input platform: ibus32_1.5.17-en-zh-bionic-20.2.4.pet (52 mb)
scim Chinese input platform: scim32_1.4.18-en-zh-bionic-20.2.4.pet (14 mb)
yong Chinese input platform: yong32_2.5.0-en-zh-bionic-20.2.4.pet (9 mb)

Plus 2 Chinese language pets each for Vanilla Dpup x86_64 9.3.39 and 10.0.50:
Simplified Chinese:
vanilladpup32-9.3.39-zhcn-20.2.3.pet (3 mb)
vanilladpup32-10.0.50-zhcn-20.2.4.pet (3 mb)

Traditional Chinese:
vanilladpup32-9.3.39-zhhk-20.2.3.pet (5 mb)
vanilladpup32-10.0.50-zhhk-20.2.4.pet (5 mb)

To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in Vanilla Dpup x86_32 9.3.39 and 10.0.50

(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for Vanilla Dpup x86_32 9.3.39 and 10.0.50. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

more information about the fcitx, gcin, hime, ibus, scim and yong pets, please see:
Documentation-and-Tools

[icake]

BarryK released EasyOS Scarthgap-series version 6.0.2 on Jun 23, 2024

for more information and discussions

download easy-6.0.2-amd64.img (926 mb)

I have created 5 half-Chinese language pets for EasyOS Scarthgap-series version 6.0.2:
fcitx Chinese input platform: fcitx64_4.2.7-en-zh-bionic-21.4.0.pet (15 mb)
gcin Chinese input platform: gcin64_2.9.0-en-zh-bionic-21.4.0.pet (6 mb)
hime Chinese input platform: hime64_0.9.11-en-zh-bionic-21.4.0.pet (5 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-21.4.0.pet (17 mb)
yong Chinese input platform: yong64_2.5.0-en-zh-bionic-21.4.0.pet (10 mb)

Plus 2 Chinese language pets each for EasyOS Scarthgap-series version 6.0.2:
Simplified Chinese: easy-scarthgap64-6.0.2-zhcn-21.4.0.pet (9 mb)

Traditional Chinese: easy-scarthgap64-6.0.2-zhhk-21.4.0.pet (7 mb)

To use:
(a) any 1 of the 5 half-Chinese language pets will enable you to display and input Chinese in EasyOS Scarthgap-series version 6.0.2

(b) the 2 name+version number corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for EasyOS Scarthgap-series version 6.0.2. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

more information about the fcitx, gcin, hime, scim and yong pets, please see:
Documentation-and-Tools

[BarryK]

@icake
Thanks very much for the PETs for EasyOS Scarthgap.

I have announced on my blog:

https://bkhome.org/news/202407/chinese- ... -pets.html

...I took the liberty of renaming the PETs.

They are online here:

https://distro.ibiblio.org/easyos/amd64 ... scarthgap/

and can be installed via PKGget package manager.

[oldstupidox2024]

你好icake，最近 easyOS6.1.1已经发布了。我使用了你最新的fcitx半步包，发现在浏览器中无法调出输入法，但在geany等其他程序中可以正常使用中文输入法。感谢你制作的中文包，我一直以来都在使用。

[icake]

easyOS6.1.1 适用的中文包有：
1. fcitx64_4.2.7-en-zh-bionic-21.4.0.pet
2. gcin64_2.9.0-en-zh-bionic-21.4.0.pet
3. hime64_0.9.11-en-zh-bionic-21.4.0.pet
4. yong64_2.5.0-en-zh-bionic-21.4.0.pet

已知的问题：
不能在以下应用程式中使用:
a. urxvt
b. Chromium browser

找到的替代方案如下：
a. 可用中文包的终端机：sakura
b. 可用中文包的浏览器：palemoon-28.4.0； seamonkey-2.49.4

icake
2024年7月28日

[BarryK]

已知的问题：
不能在以下应用程式中使用:
a. urxvt
b. Chromium browser

@icake @oldstupidox2024
Have you tried "Google Input Tools Extension"?
In the Chromium menu, choose "Extensions" then "Visit Chrome web store".

After install, looks like it can be configured by "chrome://extensions" (or via the "Settings" menu) then click on "Extension options".

[icake]

BarryK wrote:
Have you tried "Google Input Tools Extension"?

Thanks for the suggestion. I have tried Google Input Tools Extension and it appears to be another Chinese input platform that can be activated in Chromium to input and display Chinese. The extension provides a number of different input methods including Chinese inputs. However I cannot see an option inside the extension to run other Chinese input platforms used by the icake pets ( fcitx, scim, gcin, hime, rime, scim and yong).

[icake]

BarryK released EasyOS Scarthgap-series version 6.0.4 on Jul 7, 2024; 6.1 on July 13, 2024 and 6.1.1 on July 24, 2024

for more information and discussions

download easy-6.0.4-amd64.img to 6.1.1

I have created 4 half-Chinese language pets for EasyOS Scarthgap-series versions 6.0.4 to 6.1.1:
fcitx Chinese input platform: fcitx64_4.2.7-en-zh-bionic-21.4.0.pet (15 mb)
gcin Chinese input platform: gcin64_2.9.0-en-zh-bionic-21.4.0.pet (6 mb)
hime Chinese input platform: hime64_0.9.11-en-zh-bionic-21.4.0.pet (5 mb)
yong Chinese input platform: yong64_2.5.0-en-zh-bionic-21.4.0.pet (10 mb)

Plus 2 Chinese language pets each for EasyOS Scarthgap-series version 6.0.4 to 6.1.1:
Simplified Chinese:
easy-scarthgap64-6.1.1-zhcn-21.4.0.pet (9 mb)
easy-scarthgap64-6.1-zhcn-21.4.0.pet (9 mb)
easy-scarthgap64-6.0.4-zhcn-21.4.0.pet (9 mb)

Traditional Chinese:
easy-scarthgap64-6.1.1-zhhk-21.4.0.pet (7 mb)
easy-scarthgap64-6.1-zhhk-21.4.0.pet (7 mb)
easy-scarthgap64-6.0.4-zhhk-21.4.0.pet (7 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in EasyOS Scarthgap-series version 6.0.4 to 6.1.1

(b) the 2 name+version number corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for EasyOS Scarthgap-series version 6.0.4 to 6.1.1. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

Known issues：
1. The half-Chinese pets cannot be used under urxvt (can use in sakura) and Chromium browser (can use either palemoon 28.4.0 or seamonkey 2.49.4)
2. I cannot get ibus, ibus-rime nor scim to run in EasyOS Scarthgap-series version 6.0.4 to 6.1.1

more information about the fcitx, gcin, hime and yong pets, please see:
Documentation-and-Tools

[icake]

radky released Bookworm Pup64 10.0.7 on Jul 11, 2024

for more information and discussions

download BookwormPup64_10.0.7.iso (776 mb)

I have created 7 half-Chinese language pets for Bookworm Pup64 10.0.7:
fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bookworm-21.8.0.pet (19 mb)
gcin Chinese input platform: gcin64_2.8.2-en-zh-bookworm-21.8.0.pet (6 mb)
hime Chinese input platform: hime64_0.9.11-en-zh-bookworm-21.8.0.pet (6 mb)
ibus Chinese input platform: ibus64_1.5.27-en-zh-bookworm-21.8.0.pet (78 mb)
rime Chinese input platform: ibus64-rime_1.5.0-en-zh-bookworm-21.8.0.pet (78 mb)
scim Chinese input platform: scim64_1.4.9-en-zh-bookworm-21.8.0.pet (14 mb)
yong Chinese input platform: yong64_2.5.0-en-zh-bookworm-21.8.0.pet (10 mb)

Plus 2 Chinese language pets each for Bookworm Pup64 10.0.7:
Simplified Chinese: BookwormPup64-10.0.7-zhcn-21.8.0-zhcn-21.8.0.pet (4 mb)
Traditional Chinese: BookwormPup64-10.0.7-zhcn-21.8.0-zhhk-21.8.0.pet (3 mb)

To use:
(a) any 1 of the 7 half-Chinese language pets will enable you to display and input Chinese in Bookworm Pup64 10.0.7

(b) the 2 name+version number corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for Bookworm Pup64 10.0.7. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

more information about the fcitx, gcin, hime, ibus, rime, scim and yong pets, please see:
Documentation-and-Tools

[icake]

Fatdog64-902 Final was released on Jun 15, 2024 by the fatdog team.

for more information and discussions

download Fatdog64-902.iso (633 mb)

I have created 7 half-Chinese language txzes for fatdog64-902:
fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-321.6.1.txz (26 mb)
gcin Chinese input platform: gcin64_2.9.0-en-zh-bionic-321.6.1.txz (10 mb)
hime Chinese input platform: hime64_0.9.11-en-zh-bionic-321.6.1.txz (10 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-321.6.1.txz (56 mb)
rime Chinese input platform: ibus64-rime_1.4.0-en-zh-bionic-321.6.1.txz (79 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-321.6.1.txz (15 mb)
yong Chinese input platform: yong64_2.5.0-en-zh-bionic-321.6.1.txz (10 mb)

Plus 2 Chinese language txzes for fatdog64-902:
Simplified Chinese: fatdog64-902-zhcn-321.6.1.txz (4 mb)

Traditional Chinese: fatdog64-902-zhcn-321.6.1.txz (3 mb)

To use:
(a) any 1 of the 7 half-Chinese language txzes will enable you to display and input Chinese in fatdog64-902

(b) the 2 Chinese language txzes will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for fatdog64-902. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

more information about the fcitx, gcin, hime, ibus, rime, scim and yong txzes, please see: Documentation-and-Tools

[icake]

peebee released NoblePup32-24.04.20240717.iso (354 MB) on Jul 17, 2024

for more information and discussions

download NoblePup32-24.04.20240717.iso (354 MB)

I have created 6 half-Chinese language txzes for noblepup32 24.04 A3:
fcitx Chinese input platform: fcitx_4.2.9-en-zh-bionic-20.2.7.pet (27 mb)
gcin Chinese input platform: gcin32_2.8.2-en-zh-bionic-20.2.7.pet (6 mb)
hime Chinese input platform: hime32_0.9.11-en-zh-bionic-20.2.7.pet (5 mb)
ibus Chinese input platform: ibus32_1.5.17-en-zh-bionic-20.2.7.pet (33 mb)
rime Chinese input platform: ibus32-rime_1.2-en-zh-bionic-20.2.7.pet (126 mb)
yong Chinese input platform: yong32_2.5.0-en-zh-bionic-20.2.7.pet (10 mb)

Plus 2 Chinese language pets each for noblepup32 24.04.20240717:
Simplified Chinese: noblepup32-24.04.20240717-zhcn-20.2.7.pet (4 mb)

Traditional Chinese: noblepup32-24.04.20240717-zhhk-20.2.7.pet (3 mb)

To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in noblepup32 24.04.20240717

(b) the 2 name+version number corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for noblepup32 24.04.20240717. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

Know issues:
I am still trying to get scim to run on noblepup32 24.04.20240717 but there are still unresoved issues.

more information about these half-Chinese and Chinese pets, please see: Documentation-and-Tools

[Thanos]

您好icake，提个小小的建议: 您给FATDOG制作的简体中文包中，把libreoffice翻译成了“LO 名”，类似的情况还有GIMP，本来看原文就知道是什么，翻译之后反倒还要猜测真实意思。不知道这是不是照搬的其它地区叫法，至少在简体中文用户看来难以理解。希望您能考虑一下不同地区用户的习惯，谢谢。

[icake]

Thanos：提个小小的建议

多谢提议，会考虑后再决定是否采用。

[Thanos]

Thanos：提个小小的建议

多谢提议，会考虑后再决定是否采用。

请问，为什么fatdog814版的libreoffice安装中文包后界面是中文的，但是902版的安装中文包以后还是英文界面，这一版没有做吗？

[icake]

902版的安装中文包以后还是英文界面

多谢提点。查看过后捉到个小虫，改好后一切已经正常。新文件已经上传到分享目录，并取代旧的错误文件。

[icake]

BarryK released EasyOS Scarthgap-series version 6.2 on Aug 19, 2024

for more information and discussions

download easy-6.2-amd64.img

I have created 4 half-Chinese language pets for EasyOS Scarthgap-series versions 6.2:
fcitx Chinese input platform: fcitx64_4.2.7-en-zh-bionic-21.4.0.pet (15 mb)
gcin Chinese input platform: gcin64_2.9.0-en-zh-bionic-21.4.0.pet (6 mb)
hime Chinese input platform: hime64_0.9.11-en-zh-bionic-21.4.0.pet (5 mb)
yong Chinese input platform: yong64_2.5.0-en-zh-bionic-21.4.0.pet (10 mb)

Plus 2 Chinese language pets each for EasyOS Scarthgap-series version 6.2:
Simplified Chinese: easy-scarthgap64-6.2-zhcn-21.4.0.pet (9 mb)

Traditional Chinese: easy-scarthgap64-6.2-zhhk-21.4.0.pet (7 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in EasyOS Scarthgap-series version 6.2

(b) the 2 name+version number corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for EasyOS Scarthgap-series version 6.2. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

Known issues：
1. The half-Chinese pets cannot be used under urxvt (can use in sakura) and Chromium browser (can use either palemoon 28.4.0 or seamonkey 2.49.4)
2. I cannot get ibus, ibus-rime nor scim to run in EasyOS Scarthgap-series version 6.2

more information about the fcitx, gcin, hime and yong pets, please see:
Documentation-and-Tools

[icake]

peebee released voidpup64 22.02-240825 on Aug 25, 2024

for more information and discussions

download VoidPup64-22.02-240825.iso (454 mb)

I have created 4 half-Chinese language txzes for VoidPup64 22.02-231231:
fcitx Chinese input platform: fcitx64_4.2.7-en-zh-bionic-21.0.7.pet (16 mb)
gcin Chinese input platform: gcin64_2.9.0-en-zh-bionic-21.0.7.pet (7 mb)
hime Chinese input platform: hime64_0.9.11-en-zh-bionic-21.0.7.pet (6 mb)
yong Chinese input platform: yong64_2.5.0-en-zh-bionic-21.0.7.pet (10 mb)

Plus 2 Chinese language pets each for VoidPup64 22.02-240825:
Simplified Chinese: voidpup64-22.02-240825-zhcn-21.0.7.pet (4 mb)

Traditional Chinese: voidpup64-22.02-240825-zhhk-21.0.7.pet (3 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in VoidPup64 22.02-240825

(b) the 2 name+version number corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for VoidPup64 22.02-240825. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

more information about the fcitx, gcin, hime and yong pets, please see:
Documentation-and-Tools

[icake]

Fatdog64-903 Final was released on Aug 17, 2024 by the fatdog team.

for more information and discussions

download Fatdog64-903.iso (697 mb)

I have created 7 half-Chinese language txzes for fatdog64-903:
fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-321.6.1.txz (26 mb)
gcin Chinese input platform: gcin64_2.9.0-en-zh-bionic-321.6.1.txz (10 mb)
hime Chinese input platform: hime64_0.9.11-en-zh-bionic-321.6.1.txz (10 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-321.6.1.txz (56 mb)
rime Chinese input platform: ibus64-rime_1.4.0-en-zh-bionic-321.6.1.txz (79 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-321.6.1.txz (15 mb)
yong Chinese input platform: yong64_2.5.0-en-zh-bionic-321.6.1.txz (10 mb)

Plus 2 Chinese language txzes for fatdog64-903:
Simplified Chinese: fatdog64-903-zhcn-321.6.1.txz (4 mb)

Traditional Chinese: fatdog64-903-zhcn-321.6.1.txz (3 mb)

To use:
(a) any 1 of the 7 half-Chinese language txzes will enable you to display and input Chinese in fatdog64-903

(b) the 2 Chinese language txzes will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for fatdog64-903. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

more information about the fcitx, gcin, hime, ibus, rime, scim and yong txzes, please see: Documentation-and-Tools

[icake]

peebee released noblepup64.24.08.iso (1 Gb) Sep 6, 2024 and noblepup32.24.04-20240803.iso (346 mb) on Aug 3, 2024

for more information and downloads

I have created 6 half-Chinese language txzes each for noblepup64 24.08 and noblepup32 24.04 20240803:
1. noblepup64 24.08:
fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-23.1.1.pet (19 mb)
gcin Chinese input platform: gcin64_2.8.2-en-zh-bionic-23.1.1.pet (5 mb)
hime Chinese input platform: hime64_0.9.11-en-zh-bionic-23.1.1.pet (5 mb)
ibus Chinese input platform: ibus64_1.5.23-en-zh-bionic-23.1.1.pet (56 mb)
rime Chinese input platform: ibus64-rime_1.4.0-en-zh-bionic-23.1.1.pet (117 mb)
yong Chinese input platform: yong64_2.5.0-en-zh-bionic-23.1.1.pet (10 mb)

2. noblepup32 24.04 20240803:
fcitx Chinese input platform: fcitx_4.2.9-en-zh-bionic-20.2.7.pet (27 mb)
gcin Chinese input platform: gcin32_2.8.2-en-zh-bionic-20.2.7.pet (6 mb)
hime Chinese input platform: hime32_0.9.11-en-zh-bionic-20.2.7.pet (5 mb)
ibus Chinese input platform: ibus32_1.5.17-en-zh-bionic-20.2.7.pet (33 mb)
rime Chinese input platform: ibus32-rime_1.2-en-zh-bionic-20.2.7.pet (126 mb)
yong Chinese input platform: yong32_2.5.0-en-zh-bionic-20.2.7.pet (10 mb)

Plus 2 Chinese language pets each for noblepup64 24.08 and noblepup32 24.04 20240803:
Simplified Chinese:
noblepup64-24.08-zhcn-23.1.1.pet (4 mb)
noblepup32-24.04.20240803-zhcn-20.2.7.pet (4 mb)

Traditional Chinese:
noblepup64-24.08-zhhk-23.1.1.pet (3 mb)
noblepup32-24.04.20240803-zhhk-20.2.7.pet (3 mb)

To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in noblepup64 24.08 (use 23.1.1 pets) and noblepup32 24.04 20240803 (use 20.2.7 pets)

(b) the 2 name+version number corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for noblepup64 24.08 and noblepup32 24.04 20240803. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

Know issues:
I am still trying to get scim to run on noblepup64 24.08 and noblepup32 24.04 20240803 but there are still unresoved issues.

more information about these half-Chinese and Chinese pets, please see: Documentation-and-Tools