Error after frugal install on same partition as Debian 12 install

Moderator: Forum moderators

Post Reply
guineapig
Posts: 9
Joined: Fri Jun 28, 2024 11:15 pm

Error after frugal install on same partition as Debian 12 install

Post by guineapig »

i installed puppy linux frugal into the the same portion as my deabin 12 install and when I rebooted my computer it came up with this.
i would also like to do a full install, even though I know frugal has its advantages I want to do a full install.
also would having one core matter for performace

Attachments
IMG_20240725_184402765.jpg
IMG_20240725_184402765.jpg (120.62 KiB) Viewed 713 times
IMG_20240725_184057819.jpg
IMG_20240725_184057819.jpg (146.63 KiB) Viewed 713 times
User avatar
rockedge
Site Admin
Posts: 6543
Joined: Mon Dec 02, 2019 1:38 am
Location: Connecticut,U.S.A.
Has thanked: 2749 times
Been thanked: 2624 times
Contact:

Re: wierd error

Post by rockedge »

Remember, a Puppy Linux "frugal install" is equal to a full install. Are you using a computer that is low in performance and challenged with total RAM?

I think what you are seeing is the boot loader not loading through it's stages correctly.

User avatar
Trapster
Posts: 182
Joined: Sat Aug 01, 2020 7:44 pm
Has thanked: 1 time
Been thanked: 53 times

Re: wierd error

Post by Trapster »

User avatar
Chelsea80
Posts: 361
Joined: Tue Mar 09, 2021 12:44 am
Has thanked: 47 times
Been thanked: 75 times

Re: wierd error

Post by Chelsea80 »

@guineapig

Further to:

rockedge wrote: Fri Jul 26, 2024 1:06 pm

I think what you are seeing is the boot loader not loading through it's stages correctly.

Search reveals:

What does wee 13> mean when booting computer?

Sources
reddit.com favicon
answers.microsoft.com favicon

Answer
The message wee 13> during the booting process typically indicates an issue with the bootloader, specifically Grub4Dos. This message is part of the Grub4Dos bootloader's error reporting and suggests that the bootloader is unable to find or load the necessary files to continue the boot process.

Explanation:

Grub4Dos: This is a bootloader that can be used to boot multiple operating systems. It is often used in conjunction with Linux distributions like Puppy Linux.
wee Message: The wee message is a part of Grub4Dos's error output. It appears when Grub4Dos is unable to proceed with the boot process due to missing or corrupted files or incorrect configuration.
Error Code 13: The 13 in wee 13> typically signifies a specific error code. In the context of Grub4Dos, error code 13 usually means Invalid or unsupported executable format, indicating that the bootloader cannot find a valid bootable file or partition.

Potential Causes:

Corrupted Bootloader: The Grub4Dos bootloader might be corrupted and unable to locate the necessary files to boot the operating system.
Incorrect Configuration: The configuration files for Grub4Dos might be incorrectly set up, pointing to the wrong files or partitions.
Missing Files: Essential boot files might be missing or corrupted, preventing the bootloader from proceeding.

Troubleshooting Steps:

Check Bootloader Configuration: Verify that the Grub4Dos configuration files (usually menu.lst or grub.cfg) are correctly set up and point to the right partitions and files.
Reinstall Grub4Dos: Reinstalling the Grub4Dos bootloader might resolve any corruption issues. This can often be done using a live USB or CD with a Linux distribution.
Repair Boot Files: Use a live USB or CD to boot into a Linux environment and check for the presence and integrity of the necessary boot files.
Use Alternative Bootloader: If the issue persists, consider using an alternative bootloader like GRUB2, which might offer better support and error handling.

For more detailed guidance on troubleshooting and fixing bootloader issues, you can refer to resources on boot management and repair tools, such as those provided by Windows Boot Manager or Linux boot repair utilities.

Hope this helps

Chelsea80

1. BionicPup32+28 19.03 - Linux 4.9.163 - lxpup - 32-pae [i686] - (UPup Bionic Beaver)
....Frugal Install - Internal HDD - Gateway MX8716b - HDD 120GB - RAM 2GB

2. Friendly-Bionic32 v1.1
....USB Stick 2GB

User avatar
fredx181
Posts: 3070
Joined: Tue Dec 03, 2019 1:49 pm
Location: holland
Has thanked: 374 times
Been thanked: 1309 times
Contact:

Re: wierd error

Post by fredx181 »

Trapster wrote: Fri Jul 26, 2024 1:34 pm

Try here:

https://oldforum.puppylinux.com/viewtopic.php?t=111376

Yes, I think so too that's about the problem (grub4dos doesn't like booting from ext4 partition formatted with '64-bitness') read the post(s) there from the old forum for a possible fix.

User avatar
mikewalsh
Moderator
Posts: 6158
Joined: Tue Dec 03, 2019 1:40 pm
Location: King's Lynn, UK
Has thanked: 795 times
Been thanked: 1981 times

Re: wierd error

Post by mikewalsh »

fredx181 wrote: Fri Jul 26, 2024 4:28 pm
Trapster wrote: Fri Jul 26, 2024 1:34 pm

Try here:

https://oldforum.puppylinux.com/viewtopic.php?t=111376

Yes, I think so too that's about the problem (grub4dos doesn't like booting from ext4 partition formatted with '64-bitness') read the post(s) there from the old forum for a possible fix.

Yup; have to agree with this assessment. And the OP is, no doubt - like any other new user when coming to Puppy from mainstream distros - convinced that ext4 is the ONLY way to go (because that's what everybody else uses).

They quite possibly aren't aware that any other types of Linux file-system even exist......much less that anyone actually USES them.

Of course, I'm betting that using shinobar's Grub2config instead 0f Grub4DOS should overcome this "issue". Am I right?

Mike. ;)

User avatar
fredx181
Posts: 3070
Joined: Tue Dec 03, 2019 1:49 pm
Location: holland
Has thanked: 374 times
Been thanked: 1309 times
Contact:

Re: wierd error

Post by fredx181 »

mikewalsh wrote:

Of course, I'm betting that using shinobar's Grub2config instead 0f Grub4DOS should overcome this "issue". Am I right?

Are you right or are you right ?, possibly both :D but as this is in the Tahr section, I'd like to say that a "legacy" solution is also possible by converting the ext4 partition to "32-bitness" as being explained in the old-forum thread (linked to above).

Post Reply

Return to “Tahr”