Puppy Linux Discussion Forum

rockedge released F96_4-radky6-CE on Dec 31, 2022

more information and discussions: https://forum.puppylinux.com/viewtopic. ... &start=110

download F96_4-radky6-CE.iso (494 mb): https://www.smokey01.com/radky/Testing/ ... radky6.iso

I have created 6 half-Chinese language pets for:
fcitx Chinese input platform: fcitx64_4.2.7-en-zh-raring-14.0.9a.pet (16 mb)
gcin Chinese input platform: gcin64_2.8.2-en-zh-raring-14.0.9a.pet (6 mb)
hime Chinese input platform: hime64_0.9.11-en-zh-raring-14.0.9a.pet (5 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-raring-14.0.9a.pet (53 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-raring-14.0.9a.pet (13 mb)
yong Chinese input platform: yong64_2.5.0-en-zh-raring-14.0.9a.pet (10 mb)

Plus 2 Chinese language pets each for F96_4-radky6-CE:
Simplified Chinese: F96_4-radky6-CE-zhcn-14.0.9a.pet (4 mb)
Traditional Chinese: F96_4-radky6-CE-zhhk-14.0.9a.pet (3 mb)

To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in F96_4-radky6-CE

(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for F96_4-radky6-CE. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

For more information about the fcitx, gcin, hime, ibus, scim and yong half-Chinese language pets, please see the first posting of this subject

B. icake combo iso
I have also installed suitable icake Chinese language pets and remastered 2 combo live cds with multi Chinese input platforms:
icake64-F96_4-CE_radky6-est-fghisy.iso
icake64lo645-F96_4-CE_radky6-est-fghisy.iso

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

mistfire has recently released QuickPup64 23.01 beta1 on Jan 15, 2023

More information and forum discussions: https://forum.puppylinux.com/viewtopic. ... &start=332

Download iso: https://drive.google.com/file/d/1yl9b3b ... u_EKmhzdnR

I have created 6 half-Chinese language pets for QuickPup 23.01 beta1:
fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-21.3.5.pet (24 mb)
gcin Chinese input platform: gcin64_2.9.0-en-zh-bionic-21.3.5.pet (5 mb)
hime Chinese input platform: himg64_0.9.11-en-zh-bionic-21.3.5.pet (5 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.3.5.pet (55 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-21.3.5.pet (10 mb)
yong Chinese input platform: yong3264_20201122-en-zh-bionic-21.3.5.pet (10 mb)

Plus 4 Chinese language pets each for QuickPup 23.01 beta1:
Simplified Chinese: quickpup64-23.01beta1-zhcn-21.3.5.pet (3 mb)
Traditional Chinese: quickpup64-23.01beta1-zhhk-21.3.5.pet (3 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in QuickPup 23.01 beta1

(b) the name+version number corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for QuickPup 23.01 beta1. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

for more information about the fcitx, gcin, hime, ibus, scim and yong half-Chinese pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

peebee released S15Pup-22.12+2 64 and 32 bit on Jan 15, 2023

more information and discussions: https://forum.puppylinux.com/viewtopic.php?t=7464

download isoes:
S15Pup64: https://sourceforge.net/projects/spup/files/S15Pup64/
S15Pup32: https://sourceforge.net/projects/spup/files/S15Pup32/

I have created 6 half-Chinese language pets for:
32 bit S15Pup32-22.12+2.iso:
fcitx Chinese input platform: fcitx_4.2.7-en-zh-raring-14.3.9.pet (19 mb)
gcin Chinese input platform: gcin32_2.9.0-en-zh-raring-14.3.9.pet (20 mb)
hime Chinese input platform: hime32_0.9.11-en-zh-raring-14.3.9.pet (18 mb)
ibus Chinese input platform: ibus32_1.5.19-en-zh-raring-14.3.9.pet (39 mb)
scim Chinese input platform: scim_1.4.14-en-zh-raring-14.3.9.pet (14 mb)
yong Chinese input platform: yong32_2.5.0-en-zh-raring-14.3.9.pet (10 mb)

and for 64 bit S15Pup64-22.12+2.iso
fcitx Chinese input platform: fcitx64_4.2.7-en-zh-raring-14.0.9.pet (16 mb)
gcin Chinese input platform: gcin64_2.8.2-en-zh-raring-14.0.9.pet (7 mb)
hime Chinese input platform: hime64_0.9.11-en-zh-raring-14.0.9.pet (5 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-raring-14.0.9.pet (53 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-raring-14.0.9.pet (13 mb)
yong Chinese input platform: yong64_2.5.0-en-zh-raring-14.0.9.pet (10 mb)

Plus 2 Chinese language pets each for S15Pup32-22.12.+2, and S15Pup64-22.12+2:
Simplified Chinese:
s15pup32-22.12.02T-zhcn-14.3.9.pet (4 mb)
s15pup64-22.12.02T-zhcn-14.0.9.pet (4 mb)

Traditional Chinese:
s15pup32-22.12.02T-zhhk-14.3.9.pet (3 mb)
s15pup64-22.12.02T-zhhk-14.0.9.pet (3 mb)

To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in s15pup32-22.12+2 (use the 14.3.9 pets) and s15pup64-22.12+2 (use the 14.0.9 pets)

(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for S15Pup32-22.12+2 and S15Pup64-22.12+2. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

For more information about the fcitx, gcin, hime, ibus, scim and yong half-Chinese language pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

wizard released Friendly-Fossa64 v1.0 on Jan 30, 2023

more information: viewtopic.php?t=4681&start=33

download friendly-fossa64-v1.0.iso (591 mb): https://sourceforge.net/projects/friend ... o/download

I. icake half-Chinese and Chinese language pets

I have created 6 half-Chinese language pets for Friendly-Fossa64 v1.0:
fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-23.0.3.pet (26 mb)
gcin Chinese input platform: gcin64_2.8.2-en-zh-bionic-23.0.3.pet (7 mb)
hime Chinese input platform: himg64_0.9.11-en-zh-bionic-23.0.3.pet (6 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-23.0.3.pet (32 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-23.0.3.pet (15 mb)
yong Chinese input platform: yong64_2.5.0-en-zh-bionic-23.0.3.pet (11 mb)

Plus 4 Chinese language pets each for Friendly-Fossa64 v1.0:
Simplified Chinese: friendly-fossa64-v1.0-zhcn-23.0.3.pet (4 mb)
Traditional Chinese: friendly-fossa64-v1.0-zhhk-23.0.3.pet (3 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in Friendly-Fossa64 v1.0

(b) the name+version number corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for Friendly-Fossa64 v1.0. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

II. icake combo live iso
I have also remastered 2 icake combo live iso based on Friendly-Fossa64 v1.0, one with all suitable icake half-Chinese and Chinese language pets and the second one includes libreoffice 64 bit version 6.4.5:
icake64-friendly-fossa64-v1.0-est-fghisy.iso （714 mb）
icake64lo645-friendly-fossa64-v1.0-est-fghisy.iso （947 mb）

for more information about the fcitx, gcin, hime, ibus, scim and yong half-Chinese pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

rockedge released F96-CE on Jan 30, 2023 and F96-CE_1 on Feb 17, 2023

more information and discussions: viewtopic.php?t=7905&sid=be0663dc2ff5e9 ... d1fd7e7a98

download iso: https://rockedge.org/kernels/data/ISO/F96-CE/

I. icake half-Chinese and Chinese language pets

I have created 6 half-Chinese language pets for F96-CE and F96-CE_1:
fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-21.0.6.pet (19 mb)
gcin Chinese input platform: gcin64_2.9.0-en-zh-bionic-21.0.6.pet (6 mb)
hime Chinese input platform: hime64_0.9.11-en-zh-bionic-21.0.6.pet (5 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.0.6.pet (42 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-21.0.6.pet (13 mb)
yong Chinese input platform: yong64_2.5.0-en-zh-bionic-21.0.6.pet (10 mb)

Plus 2 Chinese language pets each for F96-CE and F96-CE_1:
Simplified Chinese:
F96-CE-zhcn-21.0.6.pet (4 mb)
F96-CE_1-zhcn-21.0.6.pet (4 mb)

Traditional Chinese:
F96-CE-zhhk-21.0.6.pet (3 mb)
F96-CE_1-zhhk-21.0.6.pet (3 mb)

To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in F96-CE and F96-CE_1

(b) the 2 name+version number corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for F96-CE and F96-CE_1. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

II. icake combo live iso
I have also remastered 2 icake combo live iso each based on F96-CE and F96-CE_1, one with all suitable icake half-Chinese and Chinese language pets and the second one includes libreoffice 64 bit version 6.4.5:
icake64-F96-CE-est-fghisy.iso （631 mb）
icake64lo645-F96-CE-est-fghisy.iso （865 mb）
icake64-F96-CE_1-est-fghisy.iso （654 mb）
icake64lo645-F96-CE_1-est-fghisy.iso （877 mb）

more information about the fcitx, gcin, hime, ibus, scim and yong pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

peebee released LxPupSc64-23.01+0-T.iso and LxPupSc32-23.01+0-T-k64.iso on Jan 20, 2023 and delta to 23.01+1 on Feb 12, 2023

more information and discussions: viewtopic.php?t=124&start=290

download isoes and delta files:
64 bit: https://www.smokey01.com/peebee/LxPupSc32-23.01.htm
32 bit: https://www.smokey01.com/peebee/LxPupSc32-23.01.htm

I. icake half-Chinese and Chinese language pets

I have created 6 half-Chinese language pets each for LxPupSc64-23.01+0-T and LxPupSc32-23.01+0-T-k64:
64 bit:
fcitx Chinese input platform: fcitx64_4.2.7-en-zh-bionic-21.1.8.pet (17 mb)
gcin Chinese input platform: gcin64_2.8.2-en-zh-bionic-21.1.8.pet (7 mb)
hime Chinese input platform: hime64_0.9.11-en-zh-bionic-21.1.8.pet (6 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.1.8.pet (55 mb)
scim Chinese input platform: scim64_1.4.14-en-zh-bionic-21.1.8.pet (17 mb)
yong Chinese input platform: yong64_2.5.0-en-zh-bionic-21.1.8.pet (10 mb)

32 bit:
fcitx Chinese input platform: fcitx32_4.2.7-en-zh-raring-14.2.9.pet (21 mb)
gcin Chinese input platform: gcin32_2.8.2-en-zh-raring-14.2.9.pet (10 mb)
hime Chinese input platform: hime32_0.9.11-en-zh-raring-14.2.9.pet (17 mb)
ibus Chinese input platform: ibus32_1.5.17-en-zh-raring-14.2.9.pet (38 mb)
scim Chinese input platform: scim32_1.4.14-en-zh-raring-14.2.9.pet (15 mb)
yong Chinese input platform: yong32_2.5.0-en-zh-raring-14.2.9.pet (10 mb)

Plus 2 Chinese language pets each for LxPupSc64-23.01+0-T and LxPupSc32-23.01+0-T-k64 and 23.01+1:
Simplified Chinese:
lxpupsc64-23.01.01T-zhcn-21.1.8.pet (4 mb)
lxpupsc64-23.01.00T-zhcn-21.1.8.pet (4 mb)
lxpupsc32-23.01.01Tk64-zhcn-14.2.9.pet (4 mb)
lxpupsc-23.01.00Tk64-zhcn-14.2.9.pet (4 mb)

Traditional Chinese:
lxpupsc64-23.01.01T-zhhk-21.1.8.pet (3 mb)
lxpupsc64-23.01.00T-zhhk-21.1.8.pet (3 mb)
lxpupsc32-23.01.01Tk64-zhhk-14.2.9.pet (3 mb)
lxpupsc-23.01.00Tk64-zhhk-14.2.9.pet (3 mb)

To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in LxPupSc64-23.01+0-T and LxPupSc32-23.01+0-T-k64 and 23.01+1

(b) the 2 name+version number corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for LxPupSc64-23.01+0-T and LxPupSc32-23.01+0-T-k64 and 23.01+1. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

II. icake combo live iso
I have also remastered 2 icake combo live iso based on each of LxPupSc64-23.01+0-T and LxPupSc32-23.01+0-T-k64, one with all suitable icake half-Chinese and Chinese language pets and the second one includes libreoffice (version 6.4.5 for 64 bit; version 6.2.8 for 32 bit):
icake64-LxPupSc64-23.01+0-T-est-fghisy.iso （484 mb）
icake64lo645-LxPupSc64-23.01+0-T-est-fghisy.iso （742 mb）
icake32-LxPupSc32-23.01+0-T-k64-est-fghisy.iso (484 mb)
icake32lo628-LxPupSc32-23.01+0-T-k64-est-fghisy.iso (684 mb)

more information about the fcitx, gcin, hime, ibus, scim and yong pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

peebee released frequent updates to VoidPup32 22.02 and VoidPup64 22.02

more information: viewtopic.php?t=124&start=302

download iso: https://github.com/peabee/releases/releases

I. icake half-Chinese and Chinese language pets

I have created 6 half-Chinese language pets for voidpup64 22.02 (updated 20230204) and 6 half-Chinese language pets for voidpup32 22.02 (updated 20230204):
voidpup64:
fcitx Chinese input platform: fcitx64_4.2.7-en-zh-bionic-21.0.7.pet (16 mb)
gcin Chinese input platform: gcin64_2.9.0-en-zh-bionic-21.0.7.pet (7 mb)
hime Chinese input platform: hime64_0.9.11-en-zh-bionic-21.0.7.pet (6 mb)
ibus64 Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.0.7.pet (55 mb)
scim Chinese input platform: scim64_1.4.14-en-zh-bionic-21.0.7.pet (13 mb)
yong Chinese input platform: yong64_2.5.0-en-zh-bionic-21.0.7.pet (10 mb)

voidpup32:
fcitx Chinese input platform: fcitx_4.2.7-en-zh-bionic-14.3.9.pet (20 mb)
gcin Chinese input platform: gcin32_2.9.0-en-zh-bionic-14.3.9.pet (21 mb)
hime Chinese input platform: hime32_0.9.11-en-zh-bionic-14.3.9.pet (18 mb)
ibus Chinese input platform: ibus_1.5.19-en-zh-bionic-14.3.9.pet (39 mb)
scim Chinese input platform: scim_1.4.14-en-zh-bionic-14.3.9.pet (15 mb)
yong Chinese input platform: yong32_2.5.0-en-zh-bionic-14.3.9.pet (10 mb)

Plus 2 Chinese language pets each for voidpup64 22.02 and voidpup32 22.02 updates on 2023 Feb 9:
Simplified Chinese:
void64-22.02-zhcn-21.0.7.pet (4 mb)
void32-22.02-zhcn-14.3.9.pet (4 mb)

Traditional Chinese:
void64-22.02-zhhk-21.0.7.pet (3 mb)
void32-22.02-zhhk-14.3.9.pet (3 mb)

To use:
(a) any 1 of the half-Chinese language pets will enable you to display and input Chinese in voidpup64 22.02 update on 2023 Feb 9 (please use the 21.0.7 pets) and voidpup32 22 update on 2023 Feb 9 (please use the 14.3.9 pets)

(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for voidpup64 22.02 and voidpup32 22.02 updates on 2023 Feb 9. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

II. icake combo live iso
I have also remastered 2 icake combo live iso based on each of voidpup64 22.02 and voidpup32 22.02 updates on 2023 Feb 9, one with all suitable icake half-Chinese and Chinese language pets and the second one includes libreoffice (version 6.4.5 for 64 bit ; version 6.2.8 for 32 bit):
icake64-vpup64-22.02-est-fghisy.iso （644 mb）
icake64lo645-vpup64-22.02-est-fghisy.iso （878 mb）
icake32-vpup32-22.02-est-fghisy.iso (660 mb)
icake32lo628-vpup32-22.02-est-fghisy.iso (929 mb)

For more information about the fcitx, ibus, gcin, hime, scim and yong half-Chinese language pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

peebee released frequent updates to S15Pup32 22.12 and S15Pup64 22.12

more information: viewtopic.php?t=124&start=302

download iso: https://github.com/peabee/releases/releases

I. icake half-Chinese and Chinese language pets

I have created 6 half-Chinese language pets for S15Pup64 22.12 (updated 20230204) and 6 half-Chinese language pets for S15Pup32 22.12 (updated 20230204):
64 bit S15Pup64-22.12.iso
fcitx Chinese input platform: fcitx64_4.2.7-en-zh-raring-14.0.9.pet (16 mb)
gcin Chinese input platform: gcin64_2.8.2-en-zh-raring-14.0.9.pet (7 mb)
hime Chinese input platform: hime64_0.9.11-en-zh-raring-14.0.9.pet (5 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-raring-14.0.9.pet (53 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-raring-14.0.9.pet (13 mb)
yong Chinese input platform: yong64_2.5.0-en-zh-raring-14.0.9.pet (10 mb)

32 bit S15Pup32-22.12.iso:
fcitx Chinese input platform: fcitx_4.2.7-en-zh-raring-14.3.9.pet (19 mb)
gcin Chinese input platform: gcin32_2.9.0-en-zh-raring-14.3.9.pet (20 mb)
hime Chinese input platform: hime32_0.9.11-en-zh-raring-14.3.9.pet (18 mb)
ibus Chinese input platform: ibus32_1.5.19-en-zh-raring-14.3.9.pet (39 mb)
scim Chinese input platform: scim_1.4.14-en-zh-raring-14.3.9.pet (14 mb)
yong Chinese input platform: yong32_2.5.0-en-zh-raring-14.3.9.pet (10 mb)

Plus 2 Chinese language pets each for S15Pup64 22.12 and S15Pup34 22.12 updates on 2023 Feb 4:
Simplified Chinese:
s15pup32-22.12-zhcn-14.3.9.pet (4 mb)
s15pup64-22.12-zhcn-14.0.9.pet (4 mb)

Traditional Chinese:
s15pup32-22.12-zhhk-14.3.9.pet (3 mb)
s15pup64-22.12-zhhk-14.0.9.pet (3 mb)

To use:
(a) any 1 of the half-Chinese language pets will enable you to display and input Chinese in S15Pup64 22.12 update on 2023 Feb 4 (please use the 14.3.9 pets) and S15Pup32 22.12 update on 2023 Feb 4 (please use the 14.0.9 pets)

(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for S15Pup64 22.12 and S15Pup32 22.12 updates on 2023 Feb 4. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

II. icake combo live iso
I have also remastered 2 icake combo live iso based on each of S15Pup64 22.12 and S15Pup32 22.12 updates on 2023 Feb 4, one with all suitable icake half-Chinese and Chinese language pets and the second one includes libreoffice (version 6.4.5 for 64 bit ; version 6.2.8 for 32 bit):
icake64-s15pup64-22.12-est-fghisy.iso （588 mb）
icake64lo645-s15pup64-22.12-est-fghisy.iso （821 mb）
icake32-s15pup32-22.12-est-fghisy.iso (526 mb)
icake32lo628-s15pup32-22.12-est-fghisy.iso (727 mb)

For more information about the fcitx, ibus, gcin, hime, scim and yong half-Chinese language pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

peebee released frequent updates to bionicPup32ng 19.03 and focalPup32 20.12

more information: viewtopic.php?t=124&start=302

download iso: https://github.com/peabee/releases/releases

I. icake half-Chinese and Chinese language pets

I have created 6 half-Chinese language pets for bionicPup32ng 19.03 and focalPup32 20.12 (updated 20230204):
fcitx Chinese input platform: fcitx_4.2.9-en-zh-bionic-20.0.2.pet (28 mb)
gcin Chinese input platform: gcin32_2.9.0-en-zh-bionic-20.0.2.pet (5 mb)
hime Chinese input platform: hime32_0.9.10-en-zh-bionic-20.0.2.pet (5 mb)
ibus Chinese input platform: ibus32_1.5.17-en-zh-bionic-20.0.2.pet (33 mb)
scim Chinese input platform: scim_1.4.18-en-zh-bionic-20.0.2.pet (16 mb)
yong Chinese input platform: yong32_2.5.0-en-zh-bionic-20.0.2.pet (10 mb)

Plus 2 Chinese language pets each for bionicPup32ng 19.03 and focalPup32 20.12 updates on 2023 Feb 4:
Simplified Chinese:
bionicpup32ng-19.03-zhcn-20.0.2.pet (4 mb)
focalpup32-20.12-zhcn-20.0.2.pet (4 mb)

Traditional Chinese:
bionicpup32ng-19.03-zhhk-20.0.2.pet (3 mb)
focalpup32-20.12-zhhk-20.0.2.pet (3 mb)

To use:
(a) any 1 of the half-Chinese language pets will enable you to display and input Chinese in bionicPup32ng 19.03 and focalPup32 20.12 update on 2023 Feb 4

(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for bionicPup32ng 19.03 and focalPup32 20.12 updates on 2023 Feb 4. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

II. icake combo live iso
I have also remastered 2 icake combo live iso based on each of bionicPup32ng 19.03 and focalPup32 20.12 updates on 2023 Feb 4, one with all suitable icake half-Chinese and Chinese language pets and the second one includes libreoffice32 version 6.2.8:
bionicPup32ng 19.03:
icake32-upupbb-19.03-est-fghisy.iso （468 mb）
icake32lo628-upupbb-19.03-est-fghisy.iso （669 mb）
focalPup32 20.12:
icake32-upupff+d-20.12-est-fghisy.iso (494 mb)
icake32lo628-upupff+d-20.12-est-fghisy.iso (694 mb)

For more information about the fcitx, ibus, gcin, hime, scim and yong half-Chinese language pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

mistfire has recently released QuickPup64 23.01 beta1 (Jan 15, 2023); beta2 (Jan 31, 2023) and beta3 (Feb 8, 2023)

More information and forum discussions: viewtopic.php?t=3171

Download iso:
beta1: https://drive.google.com/file/d/1yl9b3b ... u_EKmhzdnR
beta2: https://drive.google.com/file/d/1RCrkzB ... Xpa80sDXi7
beta3: https://drive.google.com/file/d/1DEIX7M ... pzPtmybcae

I have created 6 half-Chinese language pets for QuickPup 23.01 beta1 to 3:
fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-21.3.6.pet (24 mb)
gcin Chinese input platform: gcin64_2.9.0-en-zh-bionic-21.3.6.pet (5 mb)
hime Chinese input platform: himg64_0.9.11-en-zh-bionic-21.3.6.pet (5 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.3.6.pet (55 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-21.3.6.pet (10 mb)
yong Chinese input platform: yong64_2.5.0-en-zh-bionic-21.3.6.pet (10 mb)

Plus 4 Chinese language pets each for QuickPup 23.01 beta1 to 3:
Simplified Chinese:
quickpup64-23.01beta3-zhcn-21.3.6.pet (5 mb)
quickpup64-23.01beta2-zhcn-21.3.6.pet (5 mb)
quickpup64-23.01beta1-zhcn-21.3.6.pet (5 mb)

Traditional Chinese:
quickpup64-23.01beta3-zhhk-21.3.6.pet (4 mb)
quickpup64-23.01beta2-zhhk-21.3.6.pet (4 mb)
quickpup64-23.01beta1-zhhk-21.3.6.pet (4 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in QuickPup 23.01 beta1 to 3

(b) the name+version number corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for QuickPup 23.01 beta1 to 3. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

for more information about the fcitx, gcin, hime, ibus, scim and yong half-Chinese pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

norgo released SLC_64-2020.12 kernel 5.7.2 on Jan 24, 2021

more information and discussions: viewtopic.php?t=1976

download slc_64-2020.12.iso (383 mb): https://smokey01.com/norgo/slacko/064/064.php

I. icake half-Chinese and Chinese language pets

I have created 5 half-Chinese language pets for SLC_64-2020.12:
fcitx Chinese input platform: fcitx_4.2.7-en-zh-raring-14.0.9.pet (16 mb)
gcin Chinese input platform: gcin_2.9.0-en-zh-raring-14.0.9.pet (7 mb)
hime Chinese input platform: hime_0.9.11-en-zh-raring-14.0.9.pet (6 mb)
scim Chinese input platform: scim_1.4.14-en-zh-raring-14.0.9.pet (13 mb)
yong Chinese input platform: yong64_2.5.0-en-zh-raring-14.0.9.pet (10 mb)

Plus 2 Chinese language pets each for SLC_64-2020.12:
Simplified Chinese: slc_64-2020.12-zhcn-14.0.9.pet (4 mb)

Traditional Chinese: slc_64-2020.12-zhhk-14.0.9.pet (3 mb)

To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in SLC_64-2020.12

(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for SLC_64-2020.12. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

II. icake combo live iso
I have also remastered 2 icake combo live iso based on SLC_64-2020.12, one with all suitable icake half-Chinese and Chinese language pets and the second one includes libreoffice64 version 6.4.5：
icake64-slc_64-2020.12-est-fghsy.iso (459 mb)
icake364lo645-slc_64-2020.12-est-fghsy.iso (693 mb)

For more information about the fcitx, gcin, hime, ibus, scim and yong half-Chinese language pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

josejp2424 released Devuanpup 32 9.7.0-chimaera_4.0 on May 30, 2021

more information and discussions: [url]viewtopic.php?t=3083[\url]

download:
devuanpup-9.7.0-chimaera_4.0_i386.iso: [url]https://sourceforge.net/projects/devuan ... 0_i386.iso[\url]

I. icake half-Chinese and Chinese language pets

I have created 6 half-Chinese language pets for Devuanpup 32 9.7.0-chimaera_4.0 :
fcitx Chinese input platform: fcitx32_4.2.9-en-zh-bionic-20.1.6.pet (23 mb)
gcin Chinese input platform: gcin32_2.8.2-en-zh-bionic-20.1.6.pet (5 mb)
hime Chinese input platform: hime32_0.9.11-en-zh-bionic-20.1.6.pet (5 mb)
ibus Chinese input platform: ibus32_1.5.19-en-zh-bionic-20.1.6.pet (38 mb)
scim Chinese input platform: scim32_1.4.18-en-zh-bionic-20.1.6.pet (14 mb)
yong Chinese input platform: yong32_2.5.0-en-zh-bionic-20.1.6.pet (10 mb)

Plus 2 Chinese language pets each for Devuanpup 32 9.7.0-chimaera_4.0 :
Simplified Chinese: devuanpup-9.7.0-chimaera_4.0_i386-zhcn-20.1.6.pet (4 mb)

Traditional Chinese: devuanpup-9.7.0-chimaera_4.0_i386-zhhk-20.1.6.pet (3 mb)

To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in Devuanpup 32 9.7.0-chimaera_4.0

(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for Devuanpup 32 9.7.0-chimaera_4.0. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already nstalled to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

II. icake combo live iso
I have also remastered 2 icake combo live iso based on Devuanpup 32 9.7.0-chimaera_4.0, one with all suitable icake half-Chinese and Chinese language pets and the second one includes libreoffice32 version 6.2.8：
icake32-devuanpup-9.7.0-chimaera_4.0_i386-est-fghisy.iso (613 mb)
icake32lo628-devuanpup-9.7.0-chimaera_4.0_i386-est-fghisy.iso (813 mb)

For more information about the fcitx, gcin, hime, ibus, scim and yong half-Chinese language pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

jrb released Jammy64pup A1 on Feb 16, 2023; A3 on Feb 20, 2023; and B1 on Feb 22, 2023

more information and discussions: viewtopic.php?t=8040

download iso:
upup-22.04-jrb-A1.iso: https://drive.google.com/file/d/1YybUhX ... MVnYF/view
upup-22.04-jrb-A3: https://drive.google.com/file/d/1HkdxfC ... hLroI/view
upup-22.04-jrb-B1: https://drive.google.com/file/d/1c0Awpj ... sp=sharing

I. icake half-Chinese and Chinese language pets

I have created 6 half-Chinese language pets for jammy64pup A1 to B1:
fcitx Chinese input platform: fcitx64_4.2.7-en-zh-bionic-23.1.0.pet (16 mb)
gcin Chinese input platform: gcin64_2.8.2-en-zh-bionic-23.1.0.pet (6 mb)
hime Chinese input platform: hime64_0.9.11-en-zh-bionic-23.1.0.pet (5 mb)
ibus Chinese input platform: ibus64_1.5.23-en-zh-bionic-23.1.0.pet (55 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-23.1.0.pet (14 mb)
yong Chinese input platform: yong64_2.5.0-en-zh-bionic-23.1.0.pet (10 mb)

Plus 2 Chinese language pets each for jammy64pup A1 to B1:
Simplified Chinese:
upup64-22.04.jrb.b1-zhcn-23.1.0.pet (4 mb)
upup64-22.04.jrb.a3-zhcn-23.1.0.pet (4 mb)
upup64-22.04.jrb.a1-zhcn-23.1.0.pet (4 mb)

Traditional Chinese:
upup64-22.04.jrb.b1-zhhk-23.1.0.pet (3 mb)
upup64-22.04.jrb.a3-zhhk-23.1.0.pet (3 mb)
upup64-22.04.jrb.a1-zhhk-23.1.0.pet (3 mb)

To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in jammy64pup A1 to B1

(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for jammy64pup A1 to B1. Please note that all Chinese language pets rely on a uitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

II. icake combo live iso
I have also remastered 2 icake combo live iso based on jammy64pup A3, one with all suitable icake half-Chinese and Chinese language pets and the second one includes libreoffice64 version 6.4.5：
icake64-upup-22.04-jrb-A3-est-fghsy.iso (644 mb)
icake64lo645-upup-22.04-jrb-A3-est-fghsy.iso (877 mb)

For more information about the fcitx, gcin, hime, ibus, scim and yong half-Chinese language pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

peebee released KineticPup32-22.10+2.iso on Feb 18, 2023

more information and discussions: viewtopic.php?t=7127

download KineticPup32-22.10+2.iso: http://distro.ibiblio.org/puppylinux/pu ... -22.10.htm

I. icake half-Chinese and Chinese language pets

I have created 6 half-Chinese language pets each for KineticPup32 22.10+2:
fcitx Chinese input platform: fcitx32_4.2.9-en-zh-bionic-20.1.5.pet (24 mb)
gcin Chinese input platform: gcin32_2.8.2-en-zh-bionic-20.1.5.pet (5 mb)
hime Chinese input platform: hime32_0.9.11-en-zh-bionic-20.1.5.pet (6 mb)
ibus Chinese input platform: ibus32_1.5.17-en-zh-bionic-20.1.5.pet (49 mb)
scim Chinese input platform: scim32_1.4.18-en-zh-bionic-20.1.5.pet (14 mb)
yong Chinese input platform: yong32_2.5.0-en-zh-bionic-20.1.5.pet (10 mb)

Plus 2 Chinese language pets for KineticPup32 22.10+2:
Simplified Chinese: kineticpup-22.10.02-zhcn-20.1.5.pet (4 mb)
Traditional Chinese: kineticpup-22.10.02-zhhk-20.1.5.pet (3 mb)

To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in KineticPup32 22.10+2

(b) the name+version number corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for KineticPup32 22.10+2. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

II. icake combo live iso

I have also remastered 2 icake combo live iso based on Kineticpup 22.10.02, one with all suitable icake half-Chinese and Chinese language pets and the second one includes libreoffice32 version 6.2.8：
icake32-KineticPup32-22.10+2-est-fghisy.iso (463 mb)
icake32lo628-KineticPup32-22.10+2-est-fghisy.iso (664 mb)

for more information about the fcitx, gcin, hime, ibus, scim and yong pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

peebee released frequent updates to jammypup32 22.04

more information: viewtopic.php?t=124&start=302

download iso: https://github.com/peabee/releases/releases

I. icake half-Chinese and Chinese language pets
I have created 6 half-Chinese language pets for jammypup32 22.04 update on 2023 Feb 4:
fcitx Chinese input platform: fcitx_4.2.9-en-zh-bionic-20.1.5.pet (24 mb)
gcin Chinese input platform: gcin_2.9.0-en-zh-bionic-20.1.5.pet (5 mb)
hime Chinese input platform: hime_0.9.11-en-zh-bionic-20.1.5.pet (5 mb)
ibus Chinese input platform: ibus_1.5.17-en-zh-bionic-20.1.5.pet (50 mb)
scim Chinese input platform: scim_1.4.18-en-zh-bionic-20.1.5.pet (14 mb)
yong Chinese input platform: yong32_2.5.0-en-zh-bionic-20.1.5.pet (10 mb)

Plus 2 Chinese language pets each for jammypup32 22.04:
Simplified Chinese: jammypup-22.04-zhcn-20.1.5.pet (4 mb)
Traditional Chinese: jammypup-22.04-zhhk-20.1.5.pet (3 mb)

To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in jammypup32 22.04

(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon
labels, tooltips for jammypup32 22.04. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

II. icake combo live iso
I have also remastered 2 icake combo live iso based on jammypup32 22.04 update on 2023 Feb 4, one with all suitable icake half-Chinese and Chinese language pets and the second one includes libreoffice32 version 6.2.8：
icake32-upupjj+d-22.04-est-fghisy.iso (513 mb)
icake32lo628-upupjj+d-22.04-est-fghisy.iso (713 mb)

For more information about the fcitx, gcin, hime, ibus, scim and yong half-Chinese language pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

frankensteinpup 5 2022 v10 was released by Barry Kauler in 2022

more information and discussions: https://archive.org/details/Puppy_Linux_Easypup

download Frankensteinpup5-2022v10.iso (684 mb): https://archive.org/download/Puppy_Linu ... 022v10.iso

I have created 4 half-Chinese language pets for frankensteinpup 5 2022 v10:
fcitx Chinese input platform: fcitx64_4.2.7-en-zh-bionic-23.1.0.pet (16 mb)
gcin Chinese input platform: gcin64_2.8.2-en-zh-bionic-23.1.0.pet (6 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-23.1.0.pet (14 mb)
yong Chinese input platform: yong64_2.5.0-en-zh-bionic-23.1.0.pet (10 mb)

Plus 2 Chinese language pets each for frankensteinpup 5 2022 v10:
Simplified Chinese: frankensteinpup5-2022v10-zhcn-23.1.0.pet (6 mb)
Traditional Chinese: frankensteinpup5-2022v10-zhhk-23.1.0.pet (5 mb)

To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in frankensteinpup 5 2022 v10

(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon
labels, tooltips for frankensteinpup 5 2022 v10. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

For more information about the fcitx, gcin, hime, ibus, scim and yong half-Chinese language pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

rockedge released F96-CE_2 on Mar 3, 2023 and F96-CE_3 on Mar 16, 2023

more information and discussions:
F96-CE_2: viewtopic.php?t=8152
F96-CE_3: viewtopic.php?t=8264

download iso: https://rockedge.org/kernels/data/ISO/F96-CE/

I have created 6 half-Chinese language pets for F96-CE_2 and F96-CE_3:
fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-21.0.6.pet (19 mb)
gcin Chinese input platform: gcin64_2.9.0-en-zh-bionic-21.0.6.pet (6 mb)
hime Chinese input platform: hime64_0.9.11-en-zh-bionic-21.0.6.pet (5 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.0.6.pet (42 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-21.0.6.pet (13 mb)
yong Chinese input platform: yong64_2.5.0-en-zh-bionic-21.0.6.pet (10 mb)

Plus 2 Chinese language pets each for F96-CE_2 and F96-CE_3:
Simplified Chinese:
F96-CE_3-zhcn-21.0.6.pet (4 mb)
F96-CE_2-zhcn-21.0.6.pet (4 mb)

Traditional Chinese:
F96-CE_3-zhhk-21.0.6.pet (3 mb)
F96-CE_2-zhhk-21.0.6.pet (3 mb)

To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in F96-CE_2 and F96-CE_3

(b) the 2 name+version number corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips
for F96-CE_2 and F96-CE_3. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese
input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

more information about the fcitx, gcin, hime, ibus, scim and yong pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

jrb recently released Jammy64pup B2, C2 and D1

more information and discussions: viewtopic.php?t=8040

download iso: https://drive.google.com/file/d/1Pqp7te ... sp=sharing

I have created 6 half-Chinese language pets for jammy64pup B2 to D1:
fcitx Chinese input platform: fcitx64_4.2.7-en-zh-bionic-23.1.0.pet (16 mb)
gcin Chinese input platform: gcin64_2.8.2-en-zh-bionic-23.1.0.pet (6 mb)
hime Chinese input platform: hime64_0.9.11-en-zh-bionic-23.1.0.pet (5 mb)
ibus Chinese input platform: ibus64_1.5.23-en-zh-bionic-23.1.0.pet (55 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-23.1.0.pet (14 mb)
yong Chinese input platform: yong64_2.5.0-en-zh-bionic-23.1.0.pet (10 mb)

Plus 2 Chinese language pets each for jammy64pup B2 to D1:
Simplified Chinese:
upup64-22.04.jrb.d1-zhcn-23.1.0.pet (4 mb)
upup64-22.04.jrb.c2-zhcn-23.1.0.pet (4 mb)
upup64-22.04.jrb.b2-zhcn-23.1.0.pet (4 mb)

Traditional Chinese:
upup64-22.04.jrb.d1-zhhk-23.1.0.pet (3 mb)
upup64-22.04.jrb.c2-zhhk-23.1.0.pet (3 mb)
upup64-22.04.jrb.b2-zhhk-23.1.0.pet (3 mb)

To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in jammy64pup B2 to D1

(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon
labels, tooltips for jammy64pup B2 to D1. Please note that all Chinese language pets rely on a uitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

For more information about the fcitx, gcin, hime, ibus, scim and yong half-Chinese language pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

mistfire has recently released QuickPup64 23.01 beta4 (Mar 12, 2023)

More information and forum discussions: viewtopic.php?t=3171

Download iso: https://drive.google.com/file/d/1eRbrsO ... T3rxKr77mL

I have created 6 half-Chinese language pets for QuickPup 23.01 beta4:
fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-21.3.6.pet (24 mb)
gcin Chinese input platform: gcin64_2.9.0-en-zh-bionic-21.3.6.pet (5 mb)
hime Chinese input platform: hime64_0.9.11-en-zh-bionic-21.3.6.pet (5 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.3.6.pet (55 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-21.3.6.pet (10 mb)
yong Chinese input platform: yong64_2.5.0-en-zh-bionic-21.3.6.pet (10 mb)

Plus 4 Chinese language pets each for QuickPup 23.01 beta4:
Simplified Chinese: quickpup64-23.01beta4-zhcn-21.3.6.pet (5 mb)
Traditional Chinese: quickpup64-23.01beta4-zhhk-21.3.6.pet (4 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in QuickPup 23.01 beta4

(b) the name+version number corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop
menus, icon labels, tooltips for QuickPup 23.01 beta4. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the
system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

for more information about the fcitx, gcin, hime, ibus, scim and yong half-Chinese pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

peebee recently released LxPupSc64-23.01+2-T and LxPupSc32-23.01+2-T-k64 （Mar 10, 2023）

more information:
LxPupSc64-23.01+2-T: viewtopic.php?f=121&t=167
LxPupSc32-23.01+2-T: viewtopic.php?t=166

download iso:
64 bit: http://www.smokey01.com/peebee/LxPupSc64-23.01.htm
updates: https://sourceforge.net/projects/lxpup/ ... 4/updates/

32 bit: https://www.smokey01.com/peebee/LxPupSc32-23.01.htm
updates: https://sourceforge.net/projects/lxpup/ ... 2/updates/

I have created 6 half-Chinese language pets for LxPupSc64-23.01+2-T and 6 half-Chinese language pets for LxPupSc32-23.01+2-T-k64:
LxPupSc64-23.01+2-T:
fcitx Chinese input platform: fcitx64_4.2.7-en-zh-bionic-21.1.8.pet (17 mb)
gcin Chinese input platform: gcin64_2.8.2-en-zh-bionic-21.1.8.pet (7 mb)
hime Chinese input platform: hime64_0.9.11-en-zh-bionic-21.1.8.pet (6 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.1.8.pet (55 mb)
scim Chinese input platform: scim64_1.4.14-en-zh-bionic-21.1.8.pet (17 mb)
yong Chinese input platform: yong64_2.5.0-en-zh-bionic-21.1.8.pet (10 mb)

LxPupSc32-23.01+2-T-k64:
fcitx Chinese input platform: fcitx32_4.2.7-en-zh-raring-14.2.9.pet (21 mb)
gcin Chinese input platform: gcin32_2.8.2-en-zh-raring-14.2.9.pet (10 mb)
hime Chinese input platform: hime32_0.9.11-en-zh-raring-14.2.9.pet (17 mb)
ibus Chinese input platform: ibus32_1.5.17-en-zh-raring-14.2.9.pet (38 mb)
scim Chinese input platform: scim32_1.4.14-en-zh-raring-14.2.9.pet (15 mb)
yong Chinese input platform: yong32_2.5.0-en-zh-raring-14.2.9.pet (10 mb)

Plus 2 Chinese language pets each for LxPupSc64-22.03+2-T and LxPupSc32-22.03+2-T-k64:
Simplified Chinese:
lxpupsc64-23.01.02T-zhcn-21.1.8.pet (4 mb)
lxpupsc-23.01.02Tk64-zhcn-14.2.9.pet (4 mb)

Traditional Chinese:
lxpupsc64-23.01.02T-zhhk-21.1.8.pet (3 mb)
lxpupsc-23.01.02Tk64-zhhk-14.2.9.pet (3 mb)

To use:
(a) any 1 of the half-Chinese language pets will enable you to display and input Chinese in LxPupSc64-23.01+2-T (please use the 21.1.8 pets) and LxPupSc32-23.01+2-T-k64 (please use the 14.2.9 pets)

(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon
labels, tooltips for LxPupSc64-23.01+2-T and LxPupSc32-23.01+2-T-k64. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

For more information about the fcitx, ibus, gcin, hime, scim and yong half-Chinese language pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

pfeco released a number of chimerapup puppy linux on 2020-09-10 and I have created Chinese language pets for himaerapup64-10.0.0-K-4.18.8-eng-T1 (613 mb) and chimaerapup-10.2.0-15-K-4.19.20-Pae-eng-t1.iso (642 mb)

more information and discussions: https://archive.org/details/Puppy_Linux_Chimaerapup

download iso: https://archive.org/details/Puppy_Linux_Chimaerapup

I. icake half-Chinese and Chinese language pets
I have created 6 half-Chinese language pets for chimaerapup64-10.0.0-K-4.18.8-eng-T1 and 6 half-Chinese language pets for chimaerapup-10.2.0-15-K-4.19.20-Pae-eng-t1:
chimaerapup64-10.0.0-K-4.18.8-eng-T1:
fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-21.2.3.pet (19 mb)
gcin Chinese input platform: gcin64_2.8.2-en-zh-bionic-21.2.3.pet (7 mb)
hime Chinese input platform: hime64_0.9.11-en-zh-bionic-21.2.3.pet (5 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.2.3.pet (36 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-21.2.3.pet (14 mb)
yong Chinese input platform: yong64_2.5.0-en-zh-bionic-21.2.3.pet (10 mb)

chimaerapup-10.2.0-15-K-4.19.20-Pae-eng-t1:
fcitx Chinese input platform: fcitx32_4.2.9-en-zh-bionic-20.0.3.pet (24 mb)
gcin Chinese input platform: gcin32_2.8.2-en-zh-bionic-20.0.3.pet (5 mb)
hime Chinese input platform: hime32_0.9.11-en-zh-bionic-20.0.3.pet (5 mb)
ibus Chinese input platform: ibus32_1.5.17-en-zh-bionic-20.0.3.pet (33 mb)
scim Chinese input platform: scim32_1.4.18-en-zh-bionic-20.0.3.pet (14 mb)
yong Chinese input platform: yong32_2.5.0-en-zh-bionic-20.0.3.pet (9 mb)

Plus 2 Chinese language pets each for chimaerapup64-10.0.0-K-4.18.8-eng-T1 and chimaerapup-10.2.0-15-K-4.19.20-Pae-eng-t1:
Simplified Chinese:
chimaerapup64-10.0.0.k4.18.8.T1-zhcn-21.2.3.pet (4 mb)
chimaerapup-10.2.0.15.k4.19.20.t1-zhcn-20.0.3.pet (4 mb)

Traditional Chinese:
chimaerapup64-10.0.0.k4.18.8.T1-zhhk-21.2.3.pet (3 mb)
chimaerapup-10.2.0.15.k4.19.20.t1-zhhk-20.0.3.pet (3 mb)

To use:
(a) any 1 of the half-Chinese language pets will enable you to display and input Chinese in chimaerapup64-10.0.0-K-4.18.8-eng-T1 (please use the 21.1.8 pets) and chimaerapup-10.2.0-15-K-4.19.20-Pae-eng-t1 (please use the 14.2.9 pets)

(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for chimaerapup64-10.0.0-K-4.18.8-eng-T1 and chimaerapup-10.2.0-15-K-4.19.20-Pae-eng-t1. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

II. icake combo live iso
I have also remastered 4 icake combo live isoes based on chimaerapup64-10.0.0-K-4.18.8-eng-T1 and chimaerapup-10.2.0-15-K-4.19.20-Pae-eng-t1, 2 with all suitable icake half-Chinese and Chinese language pets and 2 others also include libreoffice (64 bit uses version 6.4.5 and 32 bit uses version 6.2.8)：
icake64-chimaerapup64-10.0.0-K-4.18.8-eng-T1-est-fghisy.iso (781 mb)
icake64lo645-chimaerapup64-10.0.0-K-4.18.8-eng-T1-est-fghisy.iso (1.1 gb)
icake32-chimaerapup-10.2.0-15-K-4.19.20-Pae-eng-t1-est-fghisy.iso (815 mb)
icake32lo628-chimaerapup-10.2.0-15-K-4.19.20-Pae-eng-t1-est-fghisy.iso (1 gb)

For more information about the fcitx, ibus, gcin, hime, scim and yong half-Chinese language pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

Please help - I have tried to read your instructions (on page 1) many times, but I just cannot understand the process.

I am using fossapup64 F96 CE and I want to :
(a) install the correct fonts so that I can read/display simplified chinese characters in email and documents
(b) install whatever additional program is required to enable me to input chinese characters in email and documents

I have browsed all of the fcitx files in your repository and I can see a file for pretty much any puppy system - but I cannot see one specifically for fossapup. Could you please show me where that is.

...later update after playing around a bit..
Through "trial and error" I think I have worked it out. This is what I have done:

I wanted to be able to read/display simplified Chinese characters in email and document AND be able to input Chinese characters in email and documents.
I installed the file "fcitx64_4.2.9-en-zh-bionic-21.2.3.pet "
Why this file? Well, I could not find an equivalent for fossapup and I had used this bionic version on fossapup9.5 and it seemed to work OK (although it did change the screen resolution just a little ...but workable).

Before settling on this version, I tried "fcitx64_4.2.9-en-zh-bionic-21.2.4.pet" - but this one totally screwed up my xorg file and after install it was unable to auto restart X, and I couldn't start it using the xorgwizard either - so that one was no good.

After installing the fcitx file, I also installed "F96-CE_3-zhcn-21.0.6.pet" which changed all the menu items, toolbars etc to Chinese. I realized that this was not what I wanted, so I rebooted and omitted that step when I restarted.

So - long explanation I know - but basically my understanding from all of this is that if you just want to display and input Chinese characters you just need to install a 'font' package (eg fcitx etc)

If you ALSO want to change menu, toolbar etc text, then you need to install the '..zhcn' package as well.

The icake language pets for fossapup64 F96 CE was released on Dec 1, 2022. For more details, please see this posting: viewtopic.php?t=297&start=223

As can be seen from that posting, I have created 5 half-Chinese language pets for Fossapup64-9.6-CE using the gcin, hime, ibus, scim or yong Chinese input platforms. However I have not created any half-Chinese language pets for Fossapup64-9.6-CE using the fcitx Chinese input platform. This is because I am unable to clear all the bugs after I installed fcitx to Fossapup64-9.6-CE.

Therefore if you want to display and input Chinese, please install one of the 5 half-Chinese language pets using gcin, hime, ibus, scim or yong input platform:
gcin Chinese input platform: gcin64_2.9.0-en-zh-bionic-21.0.6.pet (5 mb)
hime Chinese input platform: hime64_0.9.11-en-zh-bionic-21.0.6.pet (5 mb)
ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.0.6.pet (42 mb)
scim Chinese input platform: scim64_1.4.18-en-zh-bionic-21.0.6.pet (13 mb)
yong Chinese input platform: yong64_2.5.0-en-zh-bionic-21.0.6.pet (10 mb)

If you also want to change the desktop to Chinese, you need to install one of the above 5 half-Chinese language pets, plus install one of these 2 Chinese language pets:
Simplified Chinese: fossapup64-9.6ce-zhcn-21.0.6.pet (4 mb)
Traditional Chinese: fossapup64-9.6ce-zhhk-21.0.6.pet (3 mb)

Let me know if you have any more questions.

Thanks for replying - but still confused. You say:

I have created 5 half-Chinese language pets for Fossapup64-9.6-CE:

But - all of the .pets listed seem to be named '..bionic'. Are these .pets for Fossapup64 or Bionic64?

mow9902 wrote: ↑Wed Apr 05, 2023 11:54 pm

Please help - I have tried to read your instructions (on page 1) many times, but I just cannot understand the process.

I am using fossapup64 F96 CE and I want to :
(a) install the correct fonts so that I can read/display simplified chinese characters in email and documents
(b) install whatever additional program is required to enable me to input chinese characters in email and documents

I have browsed all of the fcitx files in your repository and I can see a file for pretty much any puppy system - but I cannot see one specifically for fossapup. Could you please show me where that is.

...later update after playing around a bit..
Through "trial and error" I think I have worked it out. This is what I have done:

I wanted to be able to read/display simplified Chinese characters in email and document AND be able to input Chinese characters in email and documents.
I installed the file "fcitx64_4.2.9-en-zh-bionic-21.2.3.pet "
Why this file? Well, I could not find an equivalent for fossapup and I had used this bionic version on fossapup9.5 and it seemed to work OK (although it did change the screen resolution just a little ...but workable).

Before settling on this version, I tried "fcitx64_4.2.9-en-zh-bionic-21.2.4.pet" - but this one totally screwed up my xorg file and after install it was unable to auto restart X, and I couldn't start it using the xorgwizard either - so that one was no good.

After installing the fcitx file, I also installed "F96-CE_3-zhcn-21.0.6.pet" which changed all the menu items, toolbars etc to Chinese. I realized that this was not what I wanted, so I rebooted and omitted that step when I restarted.

So - long explanation I know - but basically my understanding from all of this is that if you just want to display and input Chinese characters you just need to install a 'font' package (eg fcitx etc)

If you ALSO want to change menu, toolbar etc text, then you need to install the '..zhcn' package as well.

I estimate you have recently followed this version of Puppy, F96-CE_4 It's the latest version. You can install it.
Mr. icake has written Chinese input platform and Chinese language files for it, and 'half Chinese language pets' can display and input Chinese characters, You can download and install fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-21.0.6.pet.
Wishing you a pleasant day!

But - all of the .pets listed seem to be named '..bionic'. Are these .pets for Fossapup64 or Bionic64?

They are for Fossapup64-9.6-CE.

Hi iCake

I see you have been doing a lot of work here! I tried your search script .... ncurses based...so needs to be run in terminal. Why after the search doesn't there appear a clickable link to download the package?

I am after the fatdog combo package. The relevant thread says get it from the 'public folder', but that is not easy to find, with your present arrangements. Yes, there is lots of info on the first post, but I cannot find the link i need....I could not find it on sourceforge either. Maybe some reorganisation is in order....what do you think?

Anyway I want to try this 'icake64-fatdog64-813-combo-est-fghsy-321.0.5.txz'

cheers
stemsee

Thanks for your suggestions, they are now on my to-do-list.

icake64-fatdog64-813-combo-est-fghsy-321.0.5.txz is a half-Chinese language package and can be found here:

https://sourceforge.net/projects/icakec ... uage-Pets/

Let me know if you have further questions.

the actual link is this ...
https://sourceforge.net/projects/icakec ... z/download

the actual link is this ...
https://sourceforge.net/projects/icakec ... s/download

stemsee, thanks for the about message and link.

During the last few days, I was investigating the use of links on the sourceforge site so that I can better organize my 1,000+ files on the site. About an hour ago, I found out that each file uploaded to the site has its own link. I was about to amend my earlier message with the new findings and then I read your post with the link.

From now on, I will make an effort to add file links in all my posts to ease the search/download of icake pets.