Moderators: peebee, Forum moderators
I am having problems trying to boot both 64- and 32-bit versions with Ventoy. I have tried multiple flash drives. I am at work, so haven't done a thorough forum search. If there has been a thread on this, please point me in the right direction.
Thanks!
I am interested in your problem getting S15 to boot under Ventoy. There is ongoing work to get KLV and the Fossapup F96 series to boot consistantly using Ventoy. We have for example KLV booting fine and with persistence working and then the very next upgraded version will not boot cleanly.
Tracking this down is the goal so the more we know the chances are improved that we can find the cause(s) and make the changes needed so these different distro's all boot smoothly using Ventoy.
I have no problems getting S15, F96 or KLV to boot with QEMU or VirtualBox. No tests yet in a container environment.
Clarity has provided some very good info and guide, on exactly how to use Puppy Linux, with Ventoy.
viewtopic.php?p=38449#p38449
Builder of LxPups, SPups, UPup32s, VoidPups; LXDE, LXQt, Xfce addons; Chromium, Firefox etc. sfs; & Kernels
@peebee I don't think the instructions are the problem. We are have issues also with some KLV's but not all. Some F96's but not all. It is apparently a kernel issue, but not 100% sure.
It has little to nothing to do with your USB sticks, rather, it a problem that has been around since VEntoy started.
There is only 2 PUPDOG vintages, thus far, that currently boot OOTB from the Ventoy Menu. They are Slacko64s beginning v7.0 and all @fatdog v8+.
If you want to circumvent and boot ALL PUPs and DOGs, (in today's versions), you will need to
Put ALL of your ISO files in a folder on the USB named 'BOOTISOS' (DONT WORRY Ventoy will find them without problems)
add the SuperGrub2 (SG2D) ISO file to your folder with ISOs
boot to Ventoy's Menu
Select the SG2D ISO
hit the Enter-key on the SG2D Menu allowing it to discover all ISO files
Select any ISO file that it list
EXPECT to boot every ISO file you see. If there are any boot issues, these would be PUP/DOG distro issues and will have nothing to do with either Ventoy or SG2D.
I have tested all 64bit DOGs and WoofCE PUPs; they all boot without issue!
I use this USB arrangement for both good housekeeping of all my PUP ISOs and because it is a Frugal setup without any need to extract or corrupt ISO contents.
P.S. There are some recent issues with KLV that are being worked on, currently.
Moral to this story: "Since 2019, all WoofCE PUPs and DOGS boot directly from their ISO files via SG2D without issue while, since Ventoy's introduction, only the 2 mentioned DOG-PUPs do so from Ventoy's Menu listing."
Benefit: SG2D boots everything in this forum while Ventoy expresses to boot ALL distro ISO files. With this USB arrangement, I directly boot EVERY ISO file and IMG file I put in the BOOTISOS folder.
I finally got it to work with SG2D, no problems.
I ran into a bad USB a while back that read and wrote fine, but couldn't boot, so it was the first thing my mind jumped to.
I have been booting fossapup64-9.5.iso straight from Ventoy without any issues, that's why I was wondering about S15.
Thanks for the solution!
Clarity wrote: ↑Thu Jan 12, 2023 12:30 amThere is only 2 PUPDOG vintages, thus far, that currently boot OOTB from the Ventoy Menu. They are Slacko64s beginning v7.0 and all @fatdog v8+.
Moral to this story: "...., since Ventoy's introduction, only the 2 mentioned DOG-PUPs do so from Ventoy's Menu listing."
I just booted bionic32, fossa64 and tahr32 from a Ventoy USB drive.
However, S15Pup64 did NOT boot from Ventoy. But it works fine with ISObooter, as does everything else.
I thank you for both of you and sharing your findings.
There are 4 ways to create a bootable Ventoy USB
OOTB, MSDOS wo/Secure-boot
MSDOS w/Secure-boot
GPT wo/Secure-boot
GPT w/Secure-boot
Each creation should boot to its Menu if using Ventoy v80+ on both old and newer PCs.
The Ventoy creation script/ISO will create one of those above; namely:
MSDOS |
GPT |
|
|---|---|---|
No Secureboot |
Default |
|
Secureboot |
.
Question
Which of these did YOU create your Ventoy USB? ... if you remember.
This info could be useful as we continue to use these ease-of-use boot utilities provided us by the open-source community. If will become equally important as WoofCE PUPs continue to mature and secure boot use in the future.
This info is helpful as I am planning a 2023 Update Forum Guide of Ventoy-SG2D safe use especially to show current status of them in the modern 'secure-boot' environments that new users are showing up with in the forum with the modern PCs that have.
Please share that info as I think it would be valuable.
I built my Ventoy flash drive using the standard commands
Code: Select all
sh Ventoy2Disk.sh -i /dev/sdb
mkfs -t ext4 /dev/sdb1 It was tested on both BIOS and UEFI machines. The UEFI machine had Secure Boot turned off, but that should not be an issue.
Two different third party apps to boot a the new puppy ?
why not support boot methods developed by puppy contributors?
@williwaw The forum developers are a limited resource in the open source community supporting "all things Puppy-DOGs".
The discussion, here, are about open-sources helpers to reduce the workload on development, here, AND most importantly, to reduce the effort of users to get their forum distros to boot to desktop.
No forum development is needed or impacted by using any of the ISO file boot helpers. Users who use the helpers only need to download their forum distros and boot directly.
If you are developing another solution for member use, please present it. Currently in this community there are 3 helpers we discuss. Your would be welcome, should you provide another, I'm sure.
On my UEFI PC, without secure boot, FP64 and BP64 boots fine but S15pup does not. Maybe Ventoy has not been tested and optimized for S15pup... On legacy bios all pups boot.
I built my Ventoy USB using their "VentoyGUI.x86_64" script included in the Linux version.
ISObooter does work great with S15 and any other puppy.
Which of the 4 options (shown here) did you create your Ventoy USB with?
And, anyone else who is reviewing this thread who have Ventoy USB sticks, let me know which you built and any observations you might have noticed.
Everyone knows that SG2D and ISObooter works with forum distros.
Trying to identify which WoofCE or DOGs might run into boot issues via Ventoy's Menu. @fatdog has had this sorted out for years, as well as Slcako64 since v7+.
Thanks in advance for your sharing your info.
Clarity wrote: ↑Thu Jan 12, 2023 10:24 pmWhich of the 4 options (shown here) did you create your Ventoy USB with?
I ran "VentoyGUI.x86_64" on my GPT partitioned computer with no Secure Boot, and no Windows at all.
@Clarity As you may recall, I wrote the initial Ventoy topic(but I am NOT the master!). I have had several( about 8), SDHC cards and/or flash drive suddenly turn to "Read only", and cannot unlock any of them, using chmod and chown.
Only various Puppies were on most, but 1 or 2 had other Linux OS's also. I dl'd the initial Ventoy and then installed it. The others were each from a newer v , and installed right from Ventoy website on my browser. All ran well for several times, then they
"locked-up" BTW-All were first ran with gparted, msdos, Ventoy did the rest.
hI @tosim
This sound like something going on within your OS(s) that is affecting your removables. Which OS are you using?
Other questions to consider
When you say "locked up" does this mean you cannot write to them to add ISOs...or something else./
Or are you saying that when trying to repurpose a removable, GParted wont allow you to do so?
If this is happening with all of your removables, there must be function somewhere in your system(s) that is flipping your removables to a read-only status as if there is a physical switch on the units to make them 'locked'.
Several years ago I had a USB stick that, for the life of me, I could NOT unlock. This was a vendor product USB given me that I tried to understand and unlock...to no avail. After repeating attempts over several months using all sorts of techniques found in/out of the forum, I gave up and discarded it. About a month ago, I ran across a video where I watch someone unlock this type of vendor locking, but, for the life of me, I cannot find it in my history.
of the 50 or so USB sticks and etc. that was the ONLY unit ever that I encountered that exhibited that 'locked; behavior in my 3 decades of use.
Other members may know of techniques to unlock USBs that are locked by some mechanism.
BTW: Did you accidentally encrypt them or run some locking software?
Hello @tosim
Did you ever sort this issue?
Reason I ask: I think you are referring to a issue with WoofCE PUPs when on desktop after ventoy boot. Is that correct?
If so, this was reported as a bug, then changed after discussion.
Let me know.