How to take an image of the monitor screen display

Moderator: Forum moderators

Post Reply
User avatar
bigpup
Moderator
Posts: 6993
Joined: Tue Jul 14, 2020 11:19 pm
Location: Earth, South Eastern U.S.
Has thanked: 911 times
Been thanked: 1528 times

How to take an image of the monitor screen display

Post by bigpup »

All Puppy versions will usually have some program for doing this listed in Application Menu -> Graphic

Most will have Take a Shot

But there are others around this forum.

There is one that all Puppies usually have, but not well known it can do this.

MtPaint program

Some Puppy versions may have the print screen key set to make MtPaint take an image and open it displaying the image for edit in MtPaint.

----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Info provided by williams2

if you have mtpaint, you can type (paste) in a terminal:

Code: Select all

sleep 10 ; mtpaint -s

which gives you 10 seconds then takes a screen shot.
then an mtpaint window pops up.
you can process the picture if you like,
for example, you can select part of the picture
then click Image -> crop
then click File -> Save as

Note:
You need to do this to not have the terminal window in the image.
after clicking enter to activate the command code.
If you make sure to minimize the terminal window, before the image is made. (have 10 seconds after clicking enter)
That works to not have the terminal in the image.

The things you do not tell us, are usually the clue to fixing the problem.
When I was a kid, I wanted to be older.
This is not what I expected :o

User avatar
mikewalsh
Moderator
Posts: 6158
Joined: Tue Dec 03, 2019 1:40 pm
Location: King's Lynn, UK
Has thanked: 795 times
Been thanked: 1981 times

Re: How to take an image of the monitor screen display

Post by mikewalsh »

Here's a MenuEntry .pet for exactly the above; to let the user use mtPaint to take a screenshot, with a 10 second delay. Because it gives you a .desktop file, you can also add it somewhere more convenient like the Quick Launch area to the left of the task bar, next to the Menu button...

(If you want to adjust the 'time-out', just go into /usr/local/bin/mtp-snap.sh, and adjust the sleep value to suit yourself.)

It puts a Menu entry under 'Graphic', titled "mtPaint-screenshot".

Hope some of you find it useful.

Mike. ;)

Attachments
mtpaint_snapshot-1.0.pet
A Menu entry, for taking a screenshot with mtPaint...
(28.37 KiB) Downloaded 64 times
User avatar
Sofiya
Posts: 2279
Joined: Tue Dec 07, 2021 9:49 pm
Has thanked: 1477 times
Been thanked: 1524 times

Re: How to take an image of the monitor screen display

Post by Sofiya »

mikewalsh wrote: Sun Nov 13, 2022 1:04 am

Set default applications - like all puppies have
I usually choose here - what will be the default screenshot
and hotkey - prt sc takes a picture with mtpaint

Attachments
Снимок .jpg
Снимок .jpg (56.01 KiB) Viewed 1763 times

KL
PUPPY LINUX Simple fast free

User avatar
MochiMoppel
Posts: 1236
Joined: Mon Jun 15, 2020 6:25 am
Location: Japan
Has thanked: 21 times
Been thanked: 439 times

Re: How to take an image of the monitor screen display

Post by MochiMoppel »

bigpup wrote: Sat Nov 12, 2022 2:52 am

if you have mtpaint, you can type (paste) in a terminal:

Code: Select all

sleep 10 ; mtpaint -s

which gives you 10 seconds then takes a screen shot.
then an mtpaint window pops up.
<snip>
Note:
You need to do this to not have the terminal window in the image.
after clicking enter to activate the command code.
If you make sure to minimize the terminal window, before the image is made. (have 10 seconds after clicking enter)
That works to not have the terminal in the image.

You don't really need to do this. To take a shot without delay try this:

Code: Select all

mtpaint -s & exit

The terminal window will be already closed when mtpaint takes a screenshot

User avatar
wiak
Posts: 4082
Joined: Tue Dec 03, 2019 6:10 am
Location: Packing - big job
Has thanked: 65 times
Been thanked: 1208 times
Contact:

Re: How to take an image of the monitor screen display

Post by wiak »

MochiMoppel wrote: Sun Nov 13, 2022 4:32 am

You don't really need to do this. To take a shot without delay try this:

Code: Select all

mtpaint -s & exit

The terminal window will be already closed when mtpaint takes a screenshot

Didn't work on my core i7 laptop. Terminal window was still captured by mtpaint. Maybe works on slower computer?

https://www.tinylinux.info/
DOWNLOAD wd_multi for hundreds of 'distros' at your fingertips: viewtopic.php?p=99154#p99154
Αξίζει να μεταφραστεί;

User avatar
MochiMoppel
Posts: 1236
Joined: Mon Jun 15, 2020 6:25 am
Location: Japan
Has thanked: 21 times
Been thanked: 439 times

Re: How to take an image of the monitor screen display

Post by MochiMoppel »

wiak wrote: Sun Nov 13, 2022 10:56 am

Maybe works on slower computer?

Works on my netbook, definitely slower than a core i7 :lol:

Fast computers may need some initial delay. Can't be that much though. Try 0.1sec for a start

Code: Select all

{ sleep .1 ; mtpaint -s ;} & exit
User avatar
wiak
Posts: 4082
Joined: Tue Dec 03, 2019 6:10 am
Location: Packing - big job
Has thanked: 65 times
Been thanked: 1208 times
Contact:

Re: How to take an image of the monitor screen display

Post by wiak »

MochiMoppel wrote: Sun Nov 13, 2022 12:13 pm
wiak wrote: Sun Nov 13, 2022 10:56 am

Maybe works on slower computer?

Works on my netbook, definitely slower than a core i7 :lol:

Fast computers may need some initial delay. Can't be that much though. Try 0.1sec for a start

Code: Select all

{ sleep .1 ; mtpaint -s ;} & exit

No, sorry, didn't work at all - went up by 0.1 increments - seemed to just add delay prior to mtpaint -s, but the exit did not happen as you presumably think it should. I wouldn't know why, but the terminal just stays open till the very end.

EDIT: Good news... sleep .1 works now. But, not with any terminal - I was using the default terminal in xfce4 and didn't work at all; when I tried with xterm that 0.1 sleep worked (didn't work without the sleep .1).

https://www.tinylinux.info/
DOWNLOAD wd_multi for hundreds of 'distros' at your fingertips: viewtopic.php?p=99154#p99154
Αξίζει να μεταφραστεί;

Clarity
Posts: 3829
Joined: Fri Jul 24, 2020 10:59 pm
Has thanked: 1628 times
Been thanked: 522 times

Re: How to take an image of the monitor screen display

Post by Clarity »

wiak wrote: Mon Nov 14, 2022 7:03 am

EDIT: Good news... sleep .1 works now. But, not with any terminal - I was using the default terminal in xfce4 and didn't work at all; when I tried with xterm that 0.1 sleep worked (didn't work without the sleep .1).

Yes, this points to a 'problem' in the variois terminal programs that run on Linux. This become evident as there is no "standard" terminal that exist across the spectrum of this forum's many distros.

Question to community distro developers

  • Would the community find it prudent to adopt a 'standard" terminal for all of its distros while allowing the options of others? Like, for instance, one that mirrors the distro's console in every way as a standoard OOTB terminal will other terminals could be added/preent as well.

EDIT: Opps, this POST in its entirity is off-subject and should be moved. BUT not sure where.

User avatar
wiak
Posts: 4082
Joined: Tue Dec 03, 2019 6:10 am
Location: Packing - big job
Has thanked: 65 times
Been thanked: 1208 times
Contact:

Re: How to take an image of the monitor screen display

Post by wiak »

Clarity wrote: Mon Nov 14, 2022 4:40 pm

Would the community find it prudent to adopt a 'standard" terminal for all of its distros while allowing the options of others? Like, for instance, one that mirrors the distro's console in every way as a standoard OOTB terminal will other terminals could be added/preent as well.

Unlikely. Default terminal is often provided in the case of a desktop environment (such as xfce or lxde for example). For most purposes I wouldn't myself, for example, want a terminal to be the default if it didn't provide tab-support or allow easy copy/paste (such as xfce4-terminal or lxterminal). I like having standard xterm present, but not as 'default' and some similar terminals are more popular in Puppy itself (presumably because smaller to install), but with some differences in option argument functionality, which can also be a pain. Of course if you are using Xfce, and have xfce4-terminal you don't also want lxterminal and so on... in general utility apps can be written to work with various terminals, but not all Puppy app/utilities take that approach, though it is certainly a way to at least partially cater for terminal-oriented differences. The how to take an image method above simply didn't seem to work with xfce4-terminal at all though so if written into a utility that would have to be kept in mind by the utility creator.

The other reason I find the 'default_terminal' approach unsatisfactory is that, for one, some use a different name for that - say, defaultterminal or default-terminal, but more important not all distros use that naming mechanism at all and why should we be restricted in our use of forum-created utility apps to only main page forum distros? Better in my view therefore to write utility apps that check which terminals (and filemanagers) that are present on a system (within reasonable limits in terms of typical popularity in Linux universe) and cater for them automatically via slight in-utility-app code differences. That way the utility will probably simply 'work' no matter what Linux distro you use it on (assuming dependencies are met). I'm basically against a Puppy-only or forum-only environment mentality - in the past that mentality has led to the likes of root folder being hard-coded as the home directory and similar bad practices - the more universal we code our outputs the better IMO.

https://www.tinylinux.info/
DOWNLOAD wd_multi for hundreds of 'distros' at your fingertips: viewtopic.php?p=99154#p99154
Αξίζει να μεταφραστεί;

User avatar
MochiMoppel
Posts: 1236
Joined: Mon Jun 15, 2020 6:25 am
Location: Japan
Has thanked: 21 times
Been thanked: 439 times

Re: How to take an image of the monitor screen display

Post by MochiMoppel »

wiak wrote: Mon Nov 14, 2022 7:03 am

No, sorry, didn't work at all - went up by 0.1 increments - seemed to just add delay prior to mtpaint -s, but the exit did not happen as you presumably think it should.

I'm pretty sure that the exit was executed . Probably printed "exit" at a new line, All the exit command has to do is exiting the shell. It's not the job of exit to close the window.

I wouldn't know why, but the terminal just stays open till the very end.

Because it's configured this way?
You can do the same thing with urxvt:
Open a new console with urxvt +hold. In the new console enter an exit command. The window will close. That's the default behavior in my distro.
Now open a console with urxvt -hold and do the same. The window will stay open. That's the same as in your terminal.

The urxvt defaults can be changed in the .Xdefaults file:
urxvt.hold: Truewill keep the console window open after an exit command.

User avatar
wiak
Posts: 4082
Joined: Tue Dec 03, 2019 6:10 am
Location: Packing - big job
Has thanked: 65 times
Been thanked: 1208 times
Contact:

Re: How to take an image of the monitor screen display

Post by wiak »

MochiMoppel wrote: Tue Nov 15, 2022 6:29 am

I wouldn't know why, but the terminal just stays open till the very end.

Because it's configured this way?
You can do the same thing with urxvt:
Open a new console with urxvt +hold. In the new console enter an exit command. The window will close. That's the default behavior in my distro.
Now open a console with urxvt -hold and do the same. The window will stay open. That's the same as in your terminal.

Perhaps you mean something different, but if I simply open an xfce4-terminal and type exit and press return key the terminal closes.

https://www.tinylinux.info/
DOWNLOAD wd_multi for hundreds of 'distros' at your fingertips: viewtopic.php?p=99154#p99154
Αξίζει να μεταφραστεί;

User avatar
MochiMoppel
Posts: 1236
Joined: Mon Jun 15, 2020 6:25 am
Location: Japan
Has thanked: 21 times
Been thanked: 439 times

Re: How to take an image of the monitor screen display

Post by MochiMoppel »

wiak wrote: Tue Nov 15, 2022 10:26 am

Perhaps you mean something different, but if I simply open an xfce4-terminal and type exit and press return key the terminal closes.

If so then your statement "I was using the default terminal in xfce4 and didn't work at all" may point to a different and more serious problem, i.e. that the {...;} construct didn't combine the sleep and mtpaint commands and that this combo couldn't be backgrounded with '&' . I don't have xfce4 and don't know what's going on. Maybe your xfce4-terminal doesn't use a bash shell?

User avatar
wiak
Posts: 4082
Joined: Tue Dec 03, 2019 6:10 am
Location: Packing - big job
Has thanked: 65 times
Been thanked: 1208 times
Contact:

Re: How to take an image of the monitor screen display

Post by wiak »

MochiMoppel wrote: Tue Nov 15, 2022 11:18 am

Maybe your xfce4-terminal doesn't use a bash shell?

It is using bash.

https://www.tinylinux.info/
DOWNLOAD wd_multi for hundreds of 'distros' at your fingertips: viewtopic.php?p=99154#p99154
Αξίζει να μεταφραστεί;

User avatar
wiak
Posts: 4082
Joined: Tue Dec 03, 2019 6:10 am
Location: Packing - big job
Has thanked: 65 times
Been thanked: 1208 times
Contact:

Re: How to take an image of the monitor screen display

Post by wiak »

Good news... I must have been impatient or thought image was actual desktop at some point during yesterday xfce4-terminal test...

Today it worked, but only with sleep greater or equal to 2.3 on my i7 laptop:

{ sleep 2.3; mtpaint -s ;} & exit

https://www.tinylinux.info/
DOWNLOAD wd_multi for hundreds of 'distros' at your fingertips: viewtopic.php?p=99154#p99154
Αξίζει να μεταφραστεί;

Post Reply

Return to “Graphics/Video”