Hi there
Can someone provide me with a link to the above?
TIA
Moderator: Forum moderators
I know you want 64b, but here is the 32b version:
viewtopic.php?t=11371
@Jasper
Direct download of 1.47 G ZIP file -> https://github.com/puppylinux-woof-CE/w ... 1818328324
Contains:
All artifacts generated by woof-CE distro build runs -> https://github.com/puppylinux-woof-CE/woof-CE/actions
Seems to work for me.......but I am uploading to a better position to retrieve! I have to go to lunch and I'll be right back to give the link!
Log in to github and then go here:https://github.com/puppylinux-woof-CE/w ... 0412611068. Downloads have been working for me pretty regularly. @rockedge set up a thread for NoblePup64 here viewforum.php?f=216 so it might be best to move this there?
I've been running NP64 since 8 or so and the current version, 11, is pretty solid IMO. I'm working with a very preliminary LXDE adrive from @peebee with it with good success. Nits:
There is no clipboard as yet. I use Parcellite from a pet in my JWM install and so far clipit is running in the LXDE install but not reliably in the JWM one.
libdvdcss needs to be added to play some DVDs and MPV needs Celluloid added from the repo (for me) to play DVDs.
I disable Xlock in /etc/acpi/acpi.conf, It is enabled by default and IMO the default should be disabled.
The usual caveat using the Synaptic package manager. Reload needs to be run to update the package lists before using it. The lists are huge and stored at /var/lib/apt/lists. I scrub them on shutdown if using a savefile, not necessary for my usual non-savefile installs (y or a drive driven).
All my current portables (Brave, Slimjet, Ungoogled-Chromium, Sylpheed, MasterPDFEditor, LibreOffice) are running OK. The inbuilt Palemoon seems serviceable as a starter browser.
@ozsouth 6.10.4 kernel runs well in it if usrmerge adjusted.
All I can think of at the moment, give it a whirl.
My pups: LxPupSc64 and Voidpup64 with LXDE ydrv & synaptics touchpad drivers, both using savefiles. Ydrv based NoblePup64 (JWM & LXDE), Bookworm64 & Fossapup64-mid/mini (LXDE/PCManFM). No savefiles, no fdrvs there.
The periodic build will next be updated on 2 September
There is a later testing build at: link expired (you do need to login to Github to download)
libdvdcss is not provided as a binary by Ubuntu - only as compileable source .... there is a Debian version: https://debian.pkgs.org/12/multimedia-m ... 4.deb.html
Builder of LxPups, SPups, UPup32s, VoidPups; LXDE, LXQt, Xfce addons; Chromium, Firefox etc. sfs; & Kernels
Back from lunch on the river....
woof-CE built on 15 August 2024
Download -> ubuntu-noble64-11.zip 1.47 G
zip contains: iso + devx +docx + nlsx + kernel_sources
@rockedge
rockedge wrote: ↑Tue Aug 20, 2024 6:14 pmBack from lunch on the river....
woof-CE built on 15 August 2024
Download -> ubuntu-noble64-11.zip 1.47 G
Please confirm the build date as above.
My diary says today is the 20 August 2024.
Am I missing something?
Thanks
Chelsea80
1. BionicPup32+28 19.03 - Linux 4.9.163 - lxpup - 32-pae [i686] - (UPup Bionic Beaver)
....Frugal Install - Internal HDD - Gateway MX8716b - HDD 120GB - RAM 2GB
2. Friendly-Bionic32 v1.1
....USB Stick 2GB
Release version (built 08/20/24) downloaded from github and installed. Clipit confirmed as starting and working both in my JWM and my LXDE flavors. Parcellite removed from my JWM ydrive.
Thanks,
My pups: LxPupSc64 and Voidpup64 with LXDE ydrv & synaptics touchpad drivers, both using savefiles. Ydrv based NoblePup64 (JWM & LXDE), Bookworm64 & Fossapup64-mid/mini (LXDE/PCManFM). No savefiles, no fdrvs there.
@rockedge
Thanks.
Must have been a good lunch
Chelsea80
1. BionicPup32+28 19.03 - Linux 4.9.163 - lxpup - 32-pae [i686] - (UPup Bionic Beaver)
....Frugal Install - Internal HDD - Gateway MX8716b - HDD 120GB - RAM 2GB
2. Friendly-Bionic32 v1.1
....USB Stick 2GB
Hello @ally Your post is about 32bit which is posted elsewhere on the forum.
This thread is for 64bit version and related issues.
Hope this is helpful
rockedge wrote: ↑Tue Aug 20, 2024 6:14 pmBack from lunch on the river....
woof-CE built on 15 August 2024
Download -> ubuntu-noble64-11.zip 1.47 Gzip contains: iso + devx +docx + nlsx + kernel_sources
downloading but will take 4hrs...
@gychang
I just downloaded the zip file from the link in under 3 minutes. Let me put it on mega cloud location. Fiber optic connection.
here is one to try: https://mega.nz/file/K1YRia5R#xnTZWu3N9 ... Npi1NvGv1o
An alternative host for the upload:
upup64n-24.04.iso
https://www.mediafire.com/file/7sgwyf7i ... 4.iso/file
Component applications
docx_upup64n_24.04.sfs
https://www.mediafire.com/file/2mrzrvhm ... 4.sfs/file
nlsx_upup64n_24.04.sfs
https://www.mediafire.com/file/jgf9aq6w ... 4.sfs/file
devx_upup64n_24.04.sfs - contains the following:
gcc (Ubuntu 13.2.0-23ubuntu4) 13.2.0
cmake version 3.28.3
git version 2.43.0
GNU Make 4.3
autoconf (GNU Autoconf) 2.71
automake (GNU automake) 1.16.5
Python 3.12.3
This is perl 5, version 38, subversion 2 (v5.38.2) built for x86_64-linux-gnu-thread-multi
(with 44 registered patches, see perl -V for more detail)
m4 (GNU M4) 1.4.19
Ninja 1.11.1
Meson 1.3.2
bison (GNU Bison) 3.8.2
Repacked ISO with the following changes:
Kernel 6.9.9.-64oz-hf-aoum x86_64 (AUFS) thanks @ozsouth
Removed Palemoon browser
Added Intel Microcode Release 13 Aug 2024
upup64n-24.04.iso - (Approx 861mb)
05 - September 2024 - thanks @peebee
noblepup64-24.08.iso
https://www.mediafire.com/file/oe1dqhsl ... 8.iso/file
Additional files:
docx_noblepup64_24.08.sfs
https://www.mediafire.com/file/4ww0ntys ... 8.sfs/file
nlsx_noblepup64_24.08.sfs
https://www.mediafire.com/file/q39gcg2z ... 8.sfs/file
devx_noblepup64_24.08.sfs
https://www.mediafire.com/file/twfhshlk ... 8.sfs/file
kernel_sources-6.8.12-kernel-kit.sfs