Page 1 of 1

EasyOS Kirkstone v 5.2.3 - wifi not working - [solved]

Posted: Tue May 16, 2023 4:31 am
by stuff79

I uses Acer Aspire 5 labtop. The wifi hardware is "Intel WiFi 6 AX201 160 MHz". The EasyOS Kirkstone v 5.2.3 does not work with that.
---------- Some analysis output as belows: -------------------

1) Though my laptop dual boots with Windows 11, I have already disabled thw Windows Fast Boot.
2) dmesg | grep iwl , gives :
[ 60.433863] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-hr-b0-66.ucode failed with error -2
[ 60.433887] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-hr-b0-65.ucode failed with error -2
[ 60.433907] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-hr-b0-64.ucode failed with error -2
[ 60.433926] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-hr-b0-63.ucode failed with error -2
[ 60.433945] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-hr-b0-62.ucode failed with error -2
[ 60.433966] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-hr-b0-61.ucode failed with error -2
[ 60.433984] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-hr-b0-60.ucode failed with error -2
[ 60.434003] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-hr-b0-59.ucode failed with error -2
[ 60.434022] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-hr-b0-58.ucode failed with error -2
[ 60.434041] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-hr-b0-57.ucode failed with error -2
[ 60.434059] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-hr-b0-56.ucode failed with error -2
[ 60.434078] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-hr-b0-55.ucode failed with error -2
[ 60.434098] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-hr-b0-54.ucode failed with error -2
[ 60.434116] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-hr-b0-53.ucode failed with error -2
[ 60.434136] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-hr-b0-52.ucode failed with error -2
[ 60.434157] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-hr-b0-51.ucode failed with error -2
[ 60.434176] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-hr-b0-50.ucode failed with error -2
[ 60.434195] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-hr-b0-49.ucode failed with error -2
[ 60.434214] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-hr-b0-48.ucode failed with error -2
[ 60.434233] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-hr-b0-47.ucode failed with error -2
[ 60.434252] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-hr-b0-46.ucode failed with error -2
[ 60.434272] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-hr-b0-45.ucode failed with error -2
[ 60.434290] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-hr-b0-44.ucode failed with error -2
[ 60.434310] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-hr-b0-43.ucode failed with error -2
[ 60.434327] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-hr-b0-42.ucode failed with error -2
[ 60.434345] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-hr-b0-41.ucode failed with error -2
[ 60.434363] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-hr-b0-40.ucode failed with error -2
[ 60.434381] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-hr-b0-39.ucode failed with error -2
[ 60.434382] iwlwifi 0000:00:14.3: no suitable firmware found!
[ 60.434383] iwlwifi 0000:00:14.3: minimum version required: iwlwifi-so-a0-hr-b0-39
[ 60.434385] iwlwifi 0000:00:14.3: maximum version supported: iwlwifi-so-a0-hr-b0-66
[ 60.434386] iwlwifi 0000:00:14.3: check git://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git

=> there is problem "no suitable firmware found!", but I don't know how to solve it.

3) lspci -knn , gives :
0000:00:14.3 Network controller [0280]: Intel Corporation Alder Lake-P PCH CNVi WiFi [8086:51f0] (rev 01)
Subsystem: Intel Corporation Wi-Fi 6 AX201 160MHz [8086:0074]
Kernel modules: iwlwifi

4) rfkill
ID TYPE DEVICE SOFT HARD
0 bluetooth hci0 unblocked unblocked
1 wlan acer-wireless unblocked unblocked
2 bluetooth acer-bluetooth unblocked unblocked

5) # iwconfig
lo no wireless extensions.
eth0 no wireless extensions.

------------------------------------------------------

I did use other puppy linux , but first time to use EasyOS.
Be grateful if anyone can help?


Re: EasyOS Kirkstone v 5.2.3 - wifi not working

Posted: Tue May 16, 2023 6:53 pm
by Keef

Missing firmware - but you knew that already.
It looks like the answer may be here: https://www.intel.com/content/www/us/en ... eless.html
It is too large for me to upload to the forum, even the indvidual blobs.

Download the second one in the list (IntelĀ® Wi-Fi 6 AX201 160MHz).
Extract the contents and copy them to /lib/firmware
Reboot to make sure they get loaded.
Hopefully that will work.

EasyOS does not have the firmware for my own iwlwifi card (different model) but I knicked it from FatDog and it works fine.
Good luck.

If that doesn't work you may need to download the whole firmware package. However there is not one matching the list in the current package, but I found one (iwlwifi-so-a0-hr-b0-64.ucode)in this slightly older version: https://git.kernel.org/pub/scm/linux/ke ... 815.tar.gz


Re: EasyOS Kirkstone v5.3 - wifi not working

Posted: Wed May 17, 2023 1:13 am
by stuff79

Thanks a lot.
It works.
By the way, my typo error : the version I installed is 5.3, not 5.2.3