Puppy Linux Discussion Forum

Hello.

I installed version 9.2.19 (frugal install to the internal HDD).

I created a save file and rebooted to find that the OS started like the first boot.
According to the messages while it is starting, the save file seems to be read, but actually it is not. The window of QuickSetup opened. Strangely, the OS shut down without asking whether to create a save file or not.

When I looked in the install directory, the save file was surely there.

The following is part of grub.cfg:

# vanilla dpup
menuentry 'vanilla dpup (sda4/V-Dpup)'{
  search --no-floppy --set=root --fs-uuid C62EADA32EAD8CCD
  linux /V-Dpup/vmlinuz  pdrv=C62EADA32EAD8CCD  psubdir=/V-Dpup pmedia=atahd pfix=fsck intel_pstate=disable
  initrd /V-Dpup/initrd.gz
}

menuentry 'vanilla dpup (sda4/V-Dpup) RAM mode'{
  search --no-floppy --set=root --fs-uuid C62EADA32EAD8CCD
  linux /V-Dpup/vmlinuz  pdrv=C62EADA32EAD8CCD  psubdir=/V-Dpup pfix=ram
  initrd /V-Dpup/initrd.gz
}

I wonder if i did something wrong.

Before the reboot, I installed an input method (scim).
It seemed that there were two processes of scim, one as root and one as spot. There were two icons of scim in the tray. This is not what I intend to do. I would like to know how to avoid scim running doubly.

thinkpadfreak wrote: ↑Sun Oct 09, 2022 8:13 am

I wonder if i did something wrong.

As far as I see - no. Can you share /initrd/tmp/bootinit.log?

thinkpadfreak wrote: ↑Sun Oct 09, 2022 8:13 am

It seemed that there were two processes of scim, one as root and one as spot. There were two icons of scim in the tray. This is not what I intend to do. I would like to know how to avoid scim running doubly.

Maybe there's a way to force applications running as root to use the instance that runs as spot. I'll check.

dimkr wrote: ↑Sun Oct 09, 2022 12:23 pm

Can you share /initrd/tmp/bootinit.log?

0: PMEDIA=atahd PDRV=C62EADA32EAD8CCD PSUBDIR=/V-Dpup pfix=fsck
1: PDRV= P_BP_ID=C62EADA32EAD8CCD P_BP_FN=
2: ONE_PART=sda4 ONE_FN=/V-Dpup/puppy_vanilladpup_9.2.19.sfs ONE_MP=/mnt/pdrv
6: ONE_PART=sda4 ONE_TRY_FN=/V-Dpup/puppy_vanilladpup_9.2.19.sfs PDRV=sda4,ntfs,/V-Dpup/puppy_vanilladpup_9.2.19.sfs
fdisk: can't open '/dev/mmcblk0': No such file or directory
mount -o remount,append:/pup_ro2=rr /pup_new
mount -o remount,append:/pup_f=rr /pup_new
mount -o remount,append:/pup_z=rr /pup_new
mount -o remount,add:1:/pup_b=rr /pup_new
mount -o remount,add:1:/pup_k=rr /pup_new
mount -o move /mnt/pdrv /mnt/dev_save
--------------------
SAVE_MP=/mnt/dev_save
PRAMONLY=
BOOTDRV=sda
rootfs on / type rootfs (rw,size=1952032k,nr_inodes=488008)
none on /proc type proc (rw,relatime)
none on /sys type sysfs (rw,relatime)
devtmpfs on /dev type devtmpfs (rw,relatime,size=1952056k,nr_inodes=488014,mode=755)
/dev/sda4 on /mnt/dev_save type fuseblk (rw,noatime,user_id=0,group_id=0,default_permissions,blksize=4096)
tmpfs on /mnt/tmpfs type tmpfs (rw,relatime)
unionfs on /pup_new type aufs (rw,relatime,si=d5736e9e4e81c70d)
/dev/loop0 on /pup_ro2 type squashfs (ro,noatime)
/dev/loop1 on /pup_f type squashfs (ro,noatime)
/dev/loop2 on /pup_z type squashfs (ro,noatime)
/dev/loop3 on /pup_b type squashfs (ro,noatime)
/dev/loop4 on /pup_k type squashfs (ro,noatime)
--------------------
FND_MULTIFOLDER=
PUP_SAVES=sda4,fuseblk,/V-Dpup/vanilladpupsave.3fs
NUMPUP_SAVES=1
PUPSAVE=sda4,fuseblk,/V-Dpup/vanilladpupsave.3fs
Setting PUPMODE 12
SAVE_LAYER=/pup_rw
--SAVEFILE-- /mnt/dev_save/V-Dpup/vanilladpupsave.3fs
mount -t ext3 -o noatime /dev/loop5 /pup_rw
mount -o remount,prepend:/pup_rw=rw,mod:/mnt/tmpfs/pup_rw=ro,del:/mnt/tmpfs/pup_rw /pup_new
mount: mounting unionfs on /pup_new failed: No space left on device
adding /pup_rw to aufs stack failed.
umount: can't unmount /mnt/dev_save: Resource busy
Moving mountpoints to /pup_new/initrd for after switch...
mount -o move /pup_ro2 /pup_new/initrd/pup_ro2
mount -o move /pup_f /pup_new/initrd/pup_f
mount -o move /pup_z /pup_new/initrd/pup_z
mount -o move /pup_b /pup_new/initrd/pup_b
mount -o move /pup_k /pup_new/initrd/pup_k
mount -o move /pup_rw /pup_new/initrd/pup_rw
mount -o move /mnt/dev_save /pup_new/initrd/mnt/dev_save
mount -o move /mnt/tmpfs /pup_new/initrd/mnt/tmpfs
--------------------
rootfs on / type rootfs (rw,size=1952032k,nr_inodes=488008)
none on /proc type proc (rw,relatime)
none on /sys type sysfs (rw,relatime)
devtmpfs on /dev type devtmpfs (rw,relatime,size=1952056k,nr_inodes=488014,mode=755)
/dev/sda4 on /pup_new/initrd/mnt/dev_save type fuseblk (rw,noatime,user_id=0,group_id=0,default_permissions,blksize=4096)
tmpfs on /pup_new/initrd/mnt/tmpfs type tmpfs (rw,relatime)
unionfs on /pup_new type aufs (rw,relatime,si=d5736e9e4e81c70d)
/dev/loop0 on /pup_new/initrd/pup_ro2 type squashfs (ro,noatime)
/dev/loop1 on /pup_new/initrd/pup_f type squashfs (ro,noatime)
/dev/loop2 on /pup_new/initrd/pup_z type squashfs (ro,noatime)
/dev/loop3 on /pup_new/initrd/pup_b type squashfs (ro,noatime)
/dev/loop4 on /pup_new/initrd/pup_k type squashfs (ro,noatime)
/dev/loop5 on /pup_new/initrd/pup_rw type ext3 (rw,noatime)
--------------------
SAVE_FN=/mnt/dev_save/V-Dpup/vanilladpupsave.3fs
SAVE_LAYER=/pup_rw
'/pup_new/tmp' -> '/initrd/mnt/tmpfs/tmp'

/dev/sda4 is in ntfs format, and several other puppies located there work fine.

thinkpadfreak wrote: ↑Sun Oct 09, 2022 1:54 pm

--SAVEFILE-- /mnt/dev_save/V-Dpup/vanilladpupsave.3fs
mount -t ext3 -o noatime /dev/loop5 /pup_rw
mount -o remount,prepend:/pup_rw=rw,mod:/mnt/tmpfs/pup_rw=ro,del:/mnt/tmpfs/pup_rw /pup_new
mount: mounting unionfs on /pup_new failed: No space left on device
adding /pup_rw to aufs stack failed.

You're either out of space, out of RAM, hit by a bug in ntfs-3g or hit by a bug in aufs. Check if you have free space in the save file; if yes, try to boot with pfix=nocopy to free some RAM, otherwise try to free some space in the save file.

dimkr wrote: ↑Sun Oct 09, 2022 2:34 pm

try to free some space in the save file

Before rebooting, I had installed some packages in addition to executing "apt-get update."
I looked in the save file and found that some directories were empty files.
I created a new save file and it worked fine.

Thanks for your advice, and sorry for the mess.

apt-get autoremove --purge, apt-get clean and apt-get autoclean will help you keep your save files small and tidy

Another issue, fairly serious
9.2.19 has no video, amd 5700G using integrated graphics
I did manage to get it booted (very slowly) pfix=ram,nox, did keybd,tz,clock local
But nothing I can do gives X11, seems to hang (xorgwizard gives no help)
lsmod shows amdgpu is loaded
I do boot isos unusually, refind and dd iso to a partition, usually works
Install to hd uses limine (older versions)
tried vesa, also hang
Maybe because kernel is older???

dimkr wrote: ↑Sun Oct 09, 2022 4:44 pm

apt-get autoremove --purge, apt-get clean and apt-get autoclean will help you keep your save files small and tidy

Thanks again for the useful information.

wdt wrote: ↑Mon Oct 10, 2022 12:11 am

9.2.19 has no video, amd 5700G using integrated graphics

Try to boot with pfix=nox, then rm /var/local/xwin_disable_xerrs_log_flag; xwin; cat /var/log/Xorg.0.log /tmp/xerrs.log. I need to see what's inside /var/log/Xorg.0.log and /tmp/xerrs.log to tell why X failed to start.

Also, if you're willing to, I recommend you to try a development build of Vanilla Dpup 10.0.x. It's unstable and can eat your data, but if it works then we can know for sure that your system is just too new for Debian 11 (and derived distros).

thinkpadfreak wrote: ↑Sun Oct 09, 2022 8:13 am

It seemed that there were two processes of scim, one as root and one as spot.

Can you share any instructions how to use scim the way you do? I need a way to test it.

OK, I was wrong,,,it will start X, just really, really, really slow
(more like 10m than 5m) Like it was on a 25mhz 386
The only errors in Xorg log, not find evdev driver
top did not show anything suspicious
Most annoying waiting for keystrokes in xterm (10-15s to display)
logs as requested
-------------------
[ 281.348]
X.Org X Server 1.20.11
X Protocol Version 11, Revision 0
[ 281.348] Build Operating System: linux Debian
[ 281.348] Current Operating System: Linux puppypc32566 5.10.146 #1 SMP Mon Oct 3 01:27:15 UTC 2022 x86_64
[ 281.348] Kernel command line: \\vmlinuz linux /vmlinuz pfix=ram,nox initrd=\initrd.gz
[ 281.348] Build Date: 05 August 2022 08:00:36AM
[ 281.348] xorg-server 2:1.20.11-1+deb11u2 (https://www.debian.org/support)
[ 281.348] Current version of pixman: 0.40.0
[ 281.348] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 281.348] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 281.348] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Oct 11 00:22:52 2022
[ 281.349] (==) Using config file: "/etc/X11/xorg.conf"
[ 281.349] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 281.349] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 281.349] (==) ServerLayout "X.org config"
[ 281.349] (**) |-->Screen "Screen0" (0)
[ 281.349] (**) | |-->Monitor "Monitor0"
[ 281.349] (**) | |-->Device "Card0"
[ 281.349] (**) Option "DontZap" "false"
[ 281.349] (**) Option "AutoAddDevices" "true"
[ 281.349] (**) Automatically adding devices
[ 281.349] (==) Automatically enabling devices
[ 281.349] (==) Automatically adding GPU devices
[ 281.349] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 281.350] (WW) The directory "/usr/share/X11/fonts/Type1/" does not exist.
[ 281.350] Entry deleted from font path.
[ 281.350] (WW) `fonts.dir' not found (or not valid) in "/usr/share/X11/fonts/TTF/".
[ 281.350] Entry deleted from font path.
[ 281.350] (Run 'mkfontdir' on "/usr/share/X11/fonts/TTF/").
[ 281.350] (WW) The directory "/usr/share/fonts/X11/misc" does not exist.
[ 281.350] Entry deleted from font path.
[ 281.350] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 281.350] Entry deleted from font path.
[ 281.350] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 281.350] Entry deleted from font path.
[ 281.350] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 281.350] Entry deleted from font path.
[ 281.350] (WW) The directory "/usr/share/fonts/X11/Type1" does not exist.
[ 281.350] Entry deleted from font path.
[ 281.350] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 281.350] Entry deleted from font path.
[ 281.350] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 281.350] Entry deleted from font path.
[ 281.350] (**) FontPath set to:
/usr/share/X11/fonts/misc/,
built-ins
[ 281.350] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 281.350] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 281.350] (II) Loader magic: 0x556c3a7dce40
[ 281.350] (II) Module ABI versions:
[ 281.350] X.Org ANSI C Emulation: 0.4
[ 281.350] X.Org Video Driver: 24.1
[ 281.350] X.Org XInput driver : 24.1
[ 281.350] X.Org Server Extension : 10.0
[ 281.350] (--) using VT number 3

[ 281.350] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 281.350] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 325.897] (--) PCI:*(7@0:0:0) 10021458:d000 rev 200, Mem @ 0xd0000000/268435456, 0xe0000000/2097152, 0xfca00000/524288, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
[ 325.897] (II) "glx" will be loaded by default.
[ 325.897] (II) LoadModule: "dbe"
[ 325.897] (II) Module "dbe" already built-in
[ 325.897] (II) LoadModule: "glx"
[ 325.899] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 325.904] (II) Module glx: vendor="X.Org Foundation"
[ 325.904] compiled for 1.20.11, module version = 1.0.0
[ 325.904] ABI class: X.Org Server Extension, version 10.0
[ 325.904] (II) Applying OutputClass "AMDgpu" to /dev/dri/card0
[ 325.904] loading driver: amdgpu
[ 325.904] (==) Matched amdgpu as autoconfigured driver 0
[ 325.904] (==) Matched ati as autoconfigured driver 1
[ 325.904] (==) Matched modesetting as autoconfigured driver 2
[ 325.904] (==) Matched fbdev as autoconfigured driver 3
[ 325.904] (==) Matched vesa as autoconfigured driver 4
[ 325.904] (==) Assigned the driver to the xf86ConfigLayout
[ 325.904] (II) LoadModule: "amdgpu"
[ 325.904] (II) Loading /usr/lib/xorg/modules/drivers/amdgpu_drv.so
[ 325.906] (II) Module amdgpu: vendor="X.Org Foundation"
[ 325.906] compiled for 1.20.9, module version = 19.1.0
[ 325.906] Module class: X.Org Video Driver
[ 325.906] ABI class: X.Org Video Driver, version 24.1
[ 325.906] (II) LoadModule: "ati"
[ 325.906] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[ 325.907] (II) Module ati: vendor="X.Org Foundation"
[ 325.907] compiled for 1.20.9, module version = 19.1.0
[ 325.907] Module class: X.Org Video Driver
[ 325.907] ABI class: X.Org Video Driver, version 24.1
[ 397.573] (II) LoadModule: "modesetting"
[ 397.573] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 397.574] (II) Module modesetting: vendor="X.Org Foundation"
[ 397.574] compiled for 1.20.11, module version = 1.20.11
[ 397.574] Module class: X.Org Video Driver
[ 397.574] ABI class: X.Org Video Driver, version 24.1
[ 397.574] (II) LoadModule: "fbdev"
[ 397.574] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 397.574] (II) Module fbdev: vendor="X.Org Foundation"
[ 397.574] compiled for 1.20.0, module version = 0.5.0
[ 397.574] Module class: X.Org Video Driver
[ 397.574] ABI class: X.Org Video Driver, version 24.0
[ 397.574] (II) LoadModule: "vesa"
[ 397.574] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 397.575] (II) Module vesa: vendor="X.Org Foundation"
[ 397.575] compiled for 1.20.9, module version = 2.5.0
[ 397.575] Module class: X.Org Video Driver
[ 397.575] ABI class: X.Org Video Driver, version 24.1
[ 397.575] (II) AMDGPU: Driver for AMD Radeon:
All GPUs supported by the amdgpu kernel driver
[ 397.575] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 397.575] (II) FBDEV: driver for framebuffer: fbdev
[ 397.575] (II) VESA: driver for VESA chipsets: vesa
[ 469.258] (II) AMDGPU(0): [KMS] Kernel modesetting enabled.
[ 469.262] (WW) Falling back to old probe method for modesetting
[ 469.765] (WW) Falling back to old probe method for fbdev
[ 469.765] (II) Loading sub module "fbdevhw"
[ 469.765] (II) LoadModule: "fbdevhw"
[ 469.766] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 469.767] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 469.767] compiled for 1.20.11, module version = 0.0.2
[ 469.767] ABI class: X.Org Video Driver, version 24.1
[ 469.768] (==) AMDGPU(0): Depth 24, (--) framebuffer bpp 32
[ 469.768] (II) AMDGPU(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 469.768] (==) AMDGPU(0): Default visual is TrueColor
[ 469.768] (==) AMDGPU(0): RGB weight 888
[ 469.768] (II) AMDGPU(0): Using 8 bits per RGB (8 bit DAC)
[ 469.768] (--) AMDGPU(0): Chipset: "Unknown AMD Radeon GPU" (ChipID = 0x1638)
[ 469.768] (II) Loading sub module "fb"
[ 469.768] (II) LoadModule: "fb"
[ 469.768] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 469.768] (II) Module fb: vendor="X.Org Foundation"
[ 469.768] compiled for 1.20.11, module version = 1.0.0
[ 469.768] ABI class: X.Org ANSI C Emulation, version 0.4
[ 469.768] (II) Loading sub module "dri2"
[ 469.768] (II) LoadModule: "dri2"
[ 469.768] (II) Module "dri2" already built-in
[ 469.877] (II) Loading sub module "glamoregl"
[ 469.877] (II) LoadModule: "glamoregl"
[ 469.877] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 469.879] (II) Module glamoregl: vendor="X.Org Foundation"
[ 469.879] compiled for 1.20.11, module version = 1.0.1
[ 469.879] ABI class: X.Org ANSI C Emulation, version 0.4
[ 470.900] (II) AMDGPU(0): glamor X acceleration enabled on AMD RENOIR (DRM 3.40.0, 5.10.146, LLVM 11.0.1)
[ 470.900] (II) AMDGPU(0): glamor detected, initialising EGL layer.
[ 470.900] (==) AMDGPU(0): TearFree property default: auto
[ 470.900] (==) AMDGPU(0): VariableRefresh: disabled
[ 470.900] (II) AMDGPU(0): KMS Pageflipping: enabled
[ 530.693] (II) AMDGPU(0): Output HDMI-A-0 using monitor section Monitor0
[ 530.693] (II) AMDGPU(0): Output HDMI-A-1 has no monitor section
[ 571.653] (II) AMDGPU(0): EDID for output HDMI-A-0
[ 571.653] (II) AMDGPU(0): EDID for output HDMI-A-1
[ 571.653] (II) AMDGPU(0): Manufacturer: ACR Model: 359 Serial#: 1417685597
[ 571.653] (II) AMDGPU(0): Year: 2015 Week: 48
[ 571.653] (II) AMDGPU(0): EDID Version: 1.3
[ 571.653] (II) AMDGPU(0): Digital Display Input
[ 571.653] (II) AMDGPU(0): Max Image Size [cm]: horiz.: 43 vert.: 24
[ 571.653] (II) AMDGPU(0): Gamma: 2.20
[ 571.653] (II) AMDGPU(0): DPMS capabilities: StandBy Off
[ 571.653] (II) AMDGPU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 571.653] (II) AMDGPU(0): Default color space is primary color space
[ 571.653] (II) AMDGPU(0): First detailed timing is preferred mode
[ 571.653] (II) AMDGPU(0): redX: 0.636 redY: 0.340 greenX: 0.314 greenY: 0.630
[ 571.653] (II) AMDGPU(0): blueX: 0.149 blueY: 0.067 whiteX: 0.313 whiteY: 0.329
[ 571.653] (II) AMDGPU(0): Supported established timings:
[ 571.653] (II) AMDGPU(0): 720x400@70Hz
[ 571.653] (II) AMDGPU(0): 640x480@60Hz
[ 571.653] (II) AMDGPU(0): 640x480@67Hz
[ 571.653] (II) AMDGPU(0): 800x600@56Hz
[ 571.653] (II) AMDGPU(0): 800x600@60Hz
[ 571.653] (II) AMDGPU(0): 1024x768@60Hz
[ 571.653] (II) AMDGPU(0): 1024x768@70Hz
[ 571.653] (II) AMDGPU(0): Manufacturer's mask: 0
[ 571.653] (II) AMDGPU(0): Supported standard timings:
[ 571.653] (II) AMDGPU(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 571.653] (II) AMDGPU(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 571.653] (II) AMDGPU(0): #2: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 571.653] (II) AMDGPU(0): #3: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 571.653] (II) AMDGPU(0): #4: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 571.653] (II) AMDGPU(0): #5: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 571.653] (II) AMDGPU(0): #6: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
[ 571.653] (II) AMDGPU(0): Supported detailed timing:
[ 571.653] (II) AMDGPU(0): clock: 148.5 MHz Image Size: 435 x 239 mm
[ 571.653] (II) AMDGPU(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 571.653] (II) AMDGPU(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 571.653] (II) AMDGPU(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 80 kHz, PixClock max 185 MHz
[ 571.653] (II) AMDGPU(0): Monitor name: S200HQL
[ 571.653] (II) AMDGPU(0): Serial No: LZ3AA0062426
[ 571.653] (II) AMDGPU(0): EDID (in hex):
[ 571.653] (II) AMDGPU(0): 00ffffffffffff00047259035d2a8054
[ 571.654] (II) AMDGPU(0): 30190103802b1878aec955a25750a126
[ 571.654] (II) AMDGPU(0): 115054b30c00714f818081c081009500
[ 571.654] (II) AMDGPU(0): b300d1c00101023a801871382d40582c
[ 571.654] (II) AMDGPU(0): 4500b3ef1000001e000000fd00384c1f
[ 571.654] (II) AMDGPU(0): 5012000a202020202020000000fc0053
[ 571.654] (II) AMDGPU(0): 32303048514c200a20202020000000ff
[ 571.654] (II) AMDGPU(0): 004c5a334141303036323432360a001c
[ 571.654] (II) AMDGPU(0): Printing probed modes for output HDMI-A-1
[ 571.654] (II) AMDGPU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 571.654] (II) AMDGPU(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 571.654] (II) AMDGPU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 571.654] (II) AMDGPU(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 571.654] (II) AMDGPU(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 571.654] (II) AMDGPU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 571.654] (II) AMDGPU(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 571.654] (II) AMDGPU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 571.654] (II) AMDGPU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 571.654] (II) AMDGPU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 571.654] (II) AMDGPU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 571.654] (II) AMDGPU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 571.654] (II) AMDGPU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 571.654] (II) AMDGPU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 571.655] (II) AMDGPU(0): Output HDMI-A-0 disconnected
[ 571.655] (II) AMDGPU(0): Output HDMI-A-1 connected
[ 571.655] (II) AMDGPU(0): Using exact sizes for initial modes
[ 571.655] (II) AMDGPU(0): Output HDMI-A-1 using initial mode 1920x1080 +0+0
[ 571.655] (II) AMDGPU(0): mem size init: gart size :bf68b000 vram size: s:1e2ec000 visible:1e2ec000
[ 571.655] (==) AMDGPU(0): DPI set to (96, 96)
[ 571.655] (==) AMDGPU(0): Using gamma correction (1.0, 1.0, 1.0)
[ 571.655] (II) Loading sub module "ramdac"
[ 571.655] (II) LoadModule: "ramdac"
[ 571.655] (II) Module "ramdac" already built-in
[ 571.655] (II) UnloadModule: "modesetting"
[ 571.655] (II) Unloading modesetting
[ 571.655] (II) UnloadModule: "fbdev"
[ 571.655] (II) Unloading fbdev
[ 571.655] (II) UnloadSubModule: "fbdevhw"
[ 571.655] (II) Unloading fbdevhw
[ 571.655] (II) UnloadModule: "vesa"
[ 571.655] (II) Unloading vesa
[ 571.656] (II) AMDGPU(0): [DRI2] Setup complete
[ 571.656] (II) AMDGPU(0): [DRI2] DRI driver: radeonsi
[ 571.656] (II) AMDGPU(0): [DRI2] VDPAU driver: radeonsi
[ 571.701] (II) AMDGPU(0): Front buffer pitch: 7680 bytes
[ 571.701] (II) AMDGPU(0): SYNC extension fences enabled
[ 571.701] (II) AMDGPU(0): Present extension enabled
[ 571.701] (==) AMDGPU(0): DRI3 enabled
[ 571.701] (==) AMDGPU(0): Backing store enabled
[ 571.701] (II) AMDGPU(0): Direct rendering enabled
[ 571.723] (II) AMDGPU(0): Use GLAMOR acceleration.
[ 571.723] (II) AMDGPU(0): Acceleration enabled
[ 571.723] (==) AMDGPU(0): DPMS enabled
[ 571.723] (==) AMDGPU(0): Silken mouse enabled
[ 571.723] (II) AMDGPU(0): Set up textured video (glamor)
[ 612.613] (II) Initializing extension Generic Event Extension
[ 612.613] (II) Initializing extension SHAPE
[ 612.614] (II) Initializing extension MIT-SHM
[ 612.614] (II) Initializing extension XInputExtension
[ 612.614] (II) Initializing extension XTEST
[ 612.614] (II) Initializing extension BIG-REQUESTS
[ 612.614] (II) Initializing extension SYNC
[ 612.615] (II) Initializing extension XKEYBOARD
[ 612.615] (II) Initializing extension XC-MISC
[ 612.615] (II) Initializing extension SECURITY
[ 612.615] (II) Initializing extension XFIXES
[ 612.615] (II) Initializing extension RENDER
[ 612.615] (II) Initializing extension RANDR
[ 612.616] (II) Initializing extension COMPOSITE
[ 612.616] (II) Initializing extension DAMAGE
[ 612.616] (II) Initializing extension MIT-SCREEN-SAVER
[ 612.616] (II) Initializing extension DOUBLE-BUFFER
[ 612.617] (II) Initializing extension RECORD
[ 612.617] (II) Initializing extension DPMS
[ 612.617] (II) Initializing extension Present
[ 612.617] (II) Initializing extension DRI3
[ 612.617] (II) Initializing extension X-Resource
[ 612.617] (II) Initializing extension XVideo
[ 612.618] (II) Initializing extension XVideo-MotionCompensation
[ 612.618] (II) Initializing extension SELinux
[ 612.618] (II) SELinux: Disabled on system
[ 612.618] (II) Initializing extension GLX
[ 612.625] (II) AIGLX: Loaded and initialized radeonsi
[ 612.625] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 612.625] (II) Initializing extension XFree86-VidModeExtension
[ 612.625] (II) Initializing extension XFree86-DGA
[ 612.625] (II) Initializing extension XFree86-DRI
[ 612.625] (II) Initializing extension DRI2
[ 612.626] (II) AMDGPU(0): Setting screen physical size to 508 x 285
[ 675.108] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 675.108] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 675.108] (**) Power Button: Applying InputClass "keyboard-all"
[ 675.108] (II) LoadModule: "evdev"
[ 675.109] (WW) Warning, couldn't open module evdev
[ 675.109] (EE) Failed to load module "evdev" (module does not exist, 0)
[ 675.109] (EE) No input driver matching `evdev'
[ 675.109] (II) Falling back to input driver `libinput'
[ 675.109] (II) LoadModule: "libinput"
[ 675.110] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 675.113] (II) Module libinput: vendor="X.Org Foundation"
[ 675.113] compiled for 1.20.8, module version = 0.30.0
[ 675.113] Module class: X.Org XInput Driver
[ 675.113] ABI class: X.Org XInput driver, version 24.1
[ 675.113] (II) Using input driver 'libinput' for 'Power Button'
[ 675.113] (**) Power Button: always reports core events
[ 675.113] (**) Option "Device" "/dev/input/event2"
[ 675.113] (**) Option "_source" "server/udev"
[ 675.115] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 675.115] (II) event2 - Power Button: device is a keyboard
[ 675.115] (II) event2 - Power Button: device removed
[ 675.129] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 675.129] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 675.129] (**) Option "xkb_rules" "evdev"
[ 675.129] (**) Option "xkb_model" "pc104"
[ 675.129] (**) Option "xkb_layout" "us"
[ 675.129] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 675.150] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 675.150] (II) event2 - Power Button: device is a keyboard
[ 675.150] (II) config/udev: Adding input device Video Bus (/dev/input/event13)
[ 675.150] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 675.150] (**) Video Bus: Applying InputClass "keyboard-all"
[ 675.150] (II) LoadModule: "evdev"
[ 675.151] (WW) Warning, couldn't open module evdev
[ 675.151] (EE) Failed to load module "evdev" (module does not exist, 0)
[ 675.151] (EE) No input driver matching `evdev'
[ 675.151] (II) Falling back to input driver `libinput'
[ 675.151] (II) Using input driver 'libinput' for 'Video Bus'
[ 675.151] (**) Video Bus: always reports core events
[ 675.151] (**) Option "Device" "/dev/input/event13"
[ 675.151] (**) Option "_source" "server/udev"
[ 675.151] (II) event13 - Video Bus: is tagged by udev as: Keyboard
[ 675.152] (II) event13 - Video Bus: device is a keyboard
[ 675.152] (II) event13 - Video Bus: device removed
[ 675.185] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:09/LNXVIDEO:00/input/input13/event13"
[ 675.185] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 675.185] (**) Option "xkb_rules" "evdev"
[ 675.185] (**) Option "xkb_model" "pc104"
[ 675.185] (**) Option "xkb_layout" "us"
[ 675.185] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 675.187] (II) event13 - Video Bus: is tagged by udev as: Keyboard
[ 675.188] (II) event13 - Video Bus: device is a keyboard
[ 675.188] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 675.189] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 675.189] (**) Power Button: Applying InputClass "keyboard-all"
[ 675.189] (II) LoadModule: "evdev"
[ 675.189] (WW) Warning, couldn't open module evdev
[ 675.189] (EE) Failed to load module "evdev" (module does not exist, 0)
[ 675.189] (EE) No input driver matching `evdev'
[ 675.189] (II) Falling back to input driver `libinput'
[ 675.189] (II) Using input driver 'libinput' for 'Power Button'
[ 675.189] (**) Power Button: always reports core events
[ 675.189] (**) Option "Device" "/dev/input/event1"
[ 675.189] (**) Option "_source" "server/udev"
[ 675.191] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 675.191] (II) event1 - Power Button: device is a keyboard
[ 675.191] (II) event1 - Power Button: device removed
[ 675.225] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[ 675.225] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 675.225] (**) Option "xkb_rules" "evdev"
[ 675.225] (**) Option "xkb_model" "pc104"
[ 675.225] (**) Option "xkb_layout" "us"
[ 675.225] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 675.227] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 675.227] (II) event1 - Power Button: device is a keyboard
[ 675.228] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event4)
[ 675.228] (II) No input driver specified, ignoring this device.
[ 675.228] (II) This device may have been added with another device file.
[ 675.228] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=7 (/dev/input/event5)
[ 675.228] (II) No input driver specified, ignoring this device.
[ 675.228] (II) This device may have been added with another device file.
[ 675.229] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=8 (/dev/input/event6)
[ 675.229] (II) No input driver specified, ignoring this device.
[ 675.229] (II) This device may have been added with another device file.
[ 675.229] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=9 (/dev/input/event7)
[ 675.229] (II) No input driver specified, ignoring this device.
[ 675.229] (II) This device may have been added with another device file.
[ 675.230] (II) config/udev: Adding input device HD-Audio Generic Line (/dev/input/event10)
[ 675.230] (II) No input driver specified, ignoring this device.
[ 675.230] (II) This device may have been added with another device file.
[ 675.230] (II) config/udev: Adding input device HD-Audio Generic Line Out (/dev/input/event11)
[ 675.230] (II) No input driver specified, ignoring this device.
[ 675.230] (II) This device may have been added with another device file.
[ 675.230] (II) config/udev: Adding input device HD-Audio Generic Front Headphone (/dev/input/event12)
[ 675.230] (II) No input driver specified, ignoring this device.
[ 675.230] (II) This device may have been added with another device file.
[ 675.231] (II) config/udev: Adding input device HD-Audio Generic Front Mic (/dev/input/event8)
[ 675.231] (II) No input driver specified, ignoring this device.
[ 675.231] (II) This device may have been added with another device file.
[ 675.231] (II) config/udev: Adding input device HD-Audio Generic Rear Mic (/dev/input/event9)
[ 675.231] (II) No input driver specified, ignoring this device.
[ 675.231] (II) This device may have been added with another device file.
[ 675.232] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 675.232] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 675.232] (**) AT Translated Set 2 keyboard: Applying InputClass "keyboard-all"
[ 675.232] (II) LoadModule: "evdev"
[ 675.232] (WW) Warning, couldn't open module evdev
[ 675.232] (EE) Failed to load module "evdev" (module does not exist, 0)
[ 675.232] (EE) No input driver matching `evdev'
[ 675.232] (II) Falling back to input driver `libinput'
[ 675.232] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 675.232] (**) AT Translated Set 2 keyboard: always reports core events
[ 675.232] (**) Option "Device" "/dev/input/event0"
[ 675.232] (**) Option "_source" "server/udev"
[ 675.233] (II) event0 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 675.233] (II) event0 - AT Translated Set 2 keyboard: device is a keyboard
[ 675.233] (II) event0 - AT Translated Set 2 keyboard: device removed
[ 675.249] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 675.249] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[ 675.249] (**) Option "xkb_rules" "evdev"
[ 675.249] (**) Option "xkb_model" "pc104"
[ 675.249] (**) Option "xkb_layout" "us"
[ 675.249] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 675.251] (II) event0 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 675.251] (II) event0 - AT Translated Set 2 keyboard: device is a keyboard
[ 675.252] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
[ 675.252] (II) No input driver specified, ignoring this device.
[ 675.252] (II) This device may have been added with another device file.
[ 741.221] (II) config/udev: Adding input device Logitech Wireless Mouse PID:0080 (/dev/input/event14)
[ 741.221] (**) Logitech Wireless Mouse PID Applying InputClass "libinput pointer catchall"
[ 741.221] (II) Using input driver 'libinput' for 'Logitech Wireless Mouse PID:0080'
[ 741.221] (**) Logitech Wireless Mouse PID always reports core events
[ 741.221] (**) Option "Device" "/dev/input/event14"
[ 741.221] (**) Option "_source" "server/udev"
[ 741.222] (II) event14 - Logitech Wireless Mouse PID is tagged by udev as: Mouse
[ 741.222] (II) event14 - Logitech Wireless Mouse PID device is a pointer
[ 741.222] (II) event14 - Logitech Wireless Mouse PID device removed
[ 741.261] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.1/0000:01:00.0/usb1/1-7/1-7:1.1/0003:046D:C51B.0003/0003:046D:0080.0004/input/input14/event14"
[ 741.261] (II) XINPUT: Adding extended input device "Logitech Wireless Mouse PID:0080" (type: MOUSE, id 10)
[ 741.261] (**) Option "AccelerationScheme" "none"
[ 741.261] (**) Logitech Wireless Mouse PID (accel) selected scheme none/0
[ 741.261] (**) Logitech Wireless Mouse PID (accel) acceleration factor: 2.000
[ 741.261] (**) Logitech Wireless Mouse PID (accel) acceleration threshold: 4
[ 741.264] (II) event14 - Logitech Wireless Mouse PID is tagged by udev as: Mouse
[ 741.264] (II) event14 - Logitech Wireless Mouse PID device is a pointer
[ 743.848] (II) config/udev: Adding input device Logitech Wireless Mouse PID:0080 (/dev/input/mouse0)
[ 743.848] (II) No input driver specified, ignoring this device.
[ 743.848] (II) This device may have been added with another device file.
[ 1128.965] (II) event14 - Logitech Wireless Mouse PID SYN_DROPPED event - some input events have been lost.
[ 1186.821] (II) event14 - Logitech Wireless Mouse PID SYN_DROPPED event - some input events have been lost.
[ 1271.301] (II) event14 - Logitech Wireless Mouse PID SYN_DROPPED event - some input events have been lost.
[ 2215.685] (II) event14 - Logitech Wireless Mouse PID SYN_DROPPED event - some input events have been lost.

X.Org X Server 1.20.11
X Protocol Version 11, Revision 0
Build Operating System: linux Debian
Current Operating System: Linux puppypc32566 5.10.146 #1 SMP Mon Oct 3 01:27:15 UTC 2022 x86_64
Kernel command line: \\vmlinuz linux /vmlinuz pfix=ram,nox initrd=\initrd.gz
Build Date: 05 August 2022 08:00:36AM
xorg-server 2:1.20.11-1+deb11u2 (https://www.debian.org/support)
Current version of pixman: 0.40.0
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Oct 11 00:22:52 2022
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using config directory: "/etc/X11/xorg.conf.d"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(II) AMDGPU(0): [KMS] Kernel modesetting enabled.
non-network local connections being added to access control list
/bin/jwm
Driver "evdev"
acpi daemon stopped.
acpi daemon restarted.
property 'libinput Tapping Enabled' doesn't exist, you need to specify its type and format
property 'libinput Tapping Enabled' doesn't exist, you need to specify its type and format

** (ROX-Filer:7999): WARNING **: 00:30:53.418: Existing ROX-Filer process is not responding! Try with -n
property 'libinput Tapping Enabled' doesn't exist, you need to specify its type and format
blueman-applet 00.31.02 WARNING PluginManager:148 __load_plugin: Not loading DhcpClient because its conflict has higher priority
blueman-applet 00.31.02 WARNING PluginManager:148 __load_plugin: Not loading PPPSupport because its conflict has higher priority
blueman-applet 00.31.02 WARNING TransferService:189 _make_share_path: Failed to get Download dir from XDG
property 'libinput Tapping Enabled' doesn't exist, you need to specify its type and format
No battery present
Failed to grab XF86AudioRaiseVolume
Failed to grab XF86AudioLowerVolume
Failed to grab XF86AudioMute
property 'libinput Tapping Enabled' doesn't exist, you need to specify its type and format

** (ROX-Filer:8481): WARNING **: 00:31:20.061: Existing ROX-Filer process is not responding! Try with -n

** (ROX-Filer:7513): WARNING **: 00:31:38.191: Failed to send SOAP reply!
property 'libinput Tapping Enabled' doesn't exist, you need to specify its type and format

** (ROX-Filer:7513): WARNING **: 00:31:38.192: Error reading _XSOAP property!
blueman-tray version 2.1.4 starting
There is an instance already running
property 'libinput Tapping Enabled' doesn't exist, you need to specify its type and format
property 'libinput Tapping Enabled' doesn't exist, you need to specify its type and format

(blueman-tray:8493): Gdk-CRITICAL **: 00:32:04.814: gdk_window_thaw_toplevel_updates: assertion 'window->update_and_descendants_freeze_count > 0' failed
grep: /etc/resolv.conf: No such file or directory
Playing Sparc Audio '/usr/share/audio/2barks.au' : Mu-Law, Rate 8000 Hz, Mono
EXIT="abort"

dimkr wrote: ↑Mon Oct 10, 2022 3:29 pm

Can you share any instructions how to use scim the way you do? I need a way to test it.

1. Install "scim-anthy" and dependencies
2. Install "scim-gtk-immodule" and dependencies
3. Install "fonts-takao-gothic" (any japanese font will do)

4. Insert the following lines at line 43 of /root/.xinitrc

#im
 export XMODIFIERS='@im=SCIM'
 export GTK_IM_MODULE="scim"
 export QT_IM_MODULE="scim"
 scim -d

5. Execute the following commands
~$ gtk-query-immodules-2.0 --update-cache
~$ gtk-query-immodules-3.0 --update-cache

6. Set the locale as ja_JP.UTF-8

7. restart X

-----
The attached picture shows two identical icons (like keyboards) in the tray.

I downloaded 10.0.43, it booted normally,, ie X desktop about 1 minute
I planned to bisect, but only 9.2.18 shows of older 9.2 series,
and 18 won't boot, maybe because no grub.cfg

thinkpadfreak wrote: ↑Tue Oct 11, 2022 4:39 am

The attached picture shows two identical icons (like keyboards) in the tray.

I thought of a workaround.

~$ chmod 744 /usr/bin/scim-im-agent

This prevents user spot from running the executable. As a result, only one icon of the input method is displayed.

I still don't know how user spot starts scim-im-agent. Such a thing doesn't happen in other Puppies.

thinkpadfreak wrote: ↑Thu Oct 13, 2022 11:21 am

I still don't know how user spot starts scim-im-agent. Such a thing doesn't happen in other Puppies.

Some things run as spot - for example, pa-applet. If every GTK+ application loads the SCIM module, you always have at least one GTK+ application that runs as spot.

So I tried 9.2.20, just the same
actual boot is OK, but starting X takes 10m, and really slow after started
So I dragged out an intel box, i3-8100,. Everything was normal, 1m to X
FWIW