Puppy Linux Discussion Forum

good greeting
When installing the system and partitioning the hard disk I did it correctly and I did not find my files

I did it correctly and I did not find my files

perhaps you are not looking in the correct place?

where are you looking, and which files in particular are you missing?
and btw, what version did you install?

welcome

Do you mean that you can´t access your data partitions?

Generally, Puppy by default doesn´t mount the partitions automatically after boot (security reasons).

On the left bottom of the desktop should be in your Puppy the icons of all partitions in your PC (click on it and it will mount the partition and open a file manager with its content).

Or use programm called Pmount (menu->filesystem->Pmount).

williwaw wrote: ↑Tue Nov 23, 2021 9:12 am

I did it correctly and I did not find my files

perhaps you are not looking in the correct place?

where are you looking, and which files in particular are you missing?
and btw, what version did you install?

welcome

Document pictures of everything except the playback files
fossapup64-9.5

Feek wrote: ↑Tue Nov 23, 2021 9:14 am

Do you mean that you can´t access your data partitions?

Generally, Puppy by default doesn´t mount the partitions automatically after boot (security reasons).

On the left bottom of the desktop should be in your Puppy the icons of all partitions in your PC (click on it and it will mount the partition and open a file manager with its content).

Or use programm called Pmount (menu->filesystem->Pmount).

Yes, I found it, but I did not find the pictures and files. The capacity is 698.6 GB. User around 2500 MB

perhaps you have created a save but fossa does not find it when re-booting?

please describe how you made your install?

hover your mouse over the icons in lower left, you should see filesystem: ext3, ext4 or fat 32. not iso9660

williwaw wrote: ↑Wed Nov 24, 2021 3:31 am

perhaps you have created a save but fossa does not find it when re-booting?

please describe how you made your install?

hover your mouse over the icons in lower left, you should see filesystem: ext3, ext4 or fat 32. not iso9660

good greeting
Please explain with pictures or videos. I am Arabic, my language is weak
Try to understand me

root# lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
loop0 7:0 0 96.5M 1 loop /initrd/pup_ro2
loop1 7:1 0 39.3M 1 loop /initrd/pup_f
loop2 7:2 0 26.7M 1 loop /initrd/pup_z
loop3 7:3 0 228.1M 1 loop /initrd/pup_a
sda 8:0 0 698.7G 0 disk
├─sda1 8:1 0 930M 0 part
├─sda2 8:2 0 1K 0 part
├─sda5 8:5 0 696.8G 0 part
└─sda6 8:6 0 976M 0 part [SWAP]
sr0 11:0 1 1024M 0 rom

williwaw wrote: ↑Wed Nov 24, 2021 3:31 am

please describe how you made your install?

I am sure that the partition is correctly divided and not deleted or overwritten
I moved away from the logical drives and tampered with in primary, because my device is broken and I don't know where the pictures, files, etc. are located.
I know what I want here

sda5   8:5    0 696.8G  0 part

I don't know if it is full or empty

1. click on sda1 icon in lower left of screen, rox should open a window.

2. click on sda5 icon in lower left of screen, rox should open a 2nd window.

3. please post a screenshot showing contents of both rox windows

williwaw wrote: ↑Fri Nov 26, 2021 1:21 am

1. click on sda1 icon in lower left of screen, rox should open a window.

2. click on sda5 icon in lower left of screen, rox should open a 2nd window.

3. please post a screenshot showing contents of both rox windows

williwaw wrote: ↑Fri Nov 26, 2021 1:21 am

1. click on sda1 icon in lower left of screen, rox should open a window.

2. click on sda5 icon in lower left of screen, rox should open a 2nd window.

3. please post a screenshot showing contents of both rox windows

open GParted program again and follow these steps:
select sda device
click on sda5 partition in the graphic display area (the partition should be highlighted now)
from GParted menu choose: Partition->information

it should display detailed info about sda5
post a screenshot

Just to make sure.
sda5 was the partition you had the pictures, files, etc.. on?

The Gparted image shows sda5 having no format (file system) or something is wrong with the format.

In Gparted.
Right click on sda5 partition.
Select check.
Select apply.

Does this check show any errors it found?
If yes.
What are they?

If the files, pictures, etc.. you are looking for, were on the drive, before you did this:

When installing the system and partitioning the hard disk

If you did any changes to the partitioning that was on the drive.
You deleted what was on it.

If you take an area of the drive and partition it and format that new partition.
Everything that was in that area of the drive is deleted.
The partition is clean, with nothing in it.

I'm trying to understand the language with the help of an interpreter. Conclusion Either I wrote on the department or cleaned it up. Or there's a problem coordinating files in the department or another problem and so on.

Ok,
please do the check of sda5 with GParted as bigpup suggests and tell us if any errors were found.

And try to describe how did you do the partitioning of the disk step by step before the installation.

السلام عليكم
اخي أنت نصبت اللينوكس على الهارد أم على فلاشة؟
بالنسبة للملفات التى تريد الوصول اليها أذا كانت على الهارد دسك اضغط ايقونة sda1 ثم اضغط على ايقونة السهم ليبين لك ماذا يوجد على الهارد واذا كانت ملفاتك على
sdb1 ثم اضغط على السهم
وايضا يمكنك الضغط على ايقونة العين لاظهار الملفات المخفية
الفلاشة فاضغط على ايقونة
وبالنسبة لتحويل اللغة استعمل امر setxkbmap en

GOER wrote: ↑Mon Nov 29, 2021 5:33 am

السلام عليكم
اخي أنت نصبت اللينوكس على الهارد أم على فلاشة؟
بالنسبة للملفات التى تريد الوصول اليها أذا كانت على الهارد دسك اضغط ايقونة sda1 ثم اضغط على ايقونة السهم ليبين لك ماذا يوجد على الهارد واذا كانت ملفاتك على
sdb1 ثم اضغط على السهم
وايضا يمكنك الضغط على ايقونة العين لاظهار الملفات المخفية
الفلاشة فاضغط على ايقونة
وبالنسبة لتحويل اللغة استعمل امر setxkbmap en

وعليكم السلام
نصبته على الهاردسك عبر فلاشة لم اقوم بتنصيبة على الفلاشة نفسها
يا اخي لدي مشكلة في تنسيق الملف sda5 او شيء من هذا القبيل راجع الموضوع المشكلة واضحة
ملفاتي لم اجدها لا اعلم في اي مجلد فضلا ان القصر يكون سليم من حيث التنسيق انظر الى علامة التعجب مصور المشكلة راجع الموضوع لا اعرف تطبيق الدروس المذكورة هنا بسبب حاجز اللغة

GOER wrote: ↑Mon Nov 29, 2021 5:33 am

وبالنسبة لتحويل اللغة استعمل امر setxkbmap en

نعم نجحت في تحويل اللغة عبر سطر الاوامر يوجد موضوع لي يخص ذلك ولكن اريد التحويل عن طريق زرين في الكيبورد ارجوا الاطلاع على مواضيعي والرد في نفس الموضوع لان مشاكلي كثيرة على فكرة الامر الصحيح هو setxkbmap us

bigpup wrote: ↑Fri Nov 26, 2021 6:11 am

Just to make sure.
sda5 was the partition you had the pictures, files, etc.. on?

The Gparted image shows sda5 having no format (file system) or something is wrong with the format.

In Gparted.
Right click on sda5 partition.
Select check.
Select apply.

Does this check show any errors it found?
If yes.
What are they?

GOER wrote: ↑Mon Nov 29, 2021 5:33 am

وايضا يمكنك الضغط على ايقونة العين لاظهار الملفات المخفية

لا اعرف في اي مجلد اجد الصور والملفات وما الى ذلك