Grub2config replaces Grub4Dos

[shinobar]

(But I'm Still Very Alien 2 this New Fangled GPT /UEFi ) & az I've Previously said I want 2 Stick w/ the Old Skool MS DOS / MB

Sorry, i cannot follow you. Are you want to install Grub2 on the internal SDD?
Is the SSD has the msdos type partition table or GPT?
What are the flags on sda1 and sda2?
What is the BIOS boot mode? UEFI or CSM?

Anyway, I recommend to install BionicPup on a USB, and run Grub2config from BionicPup.

[shinobar]

I installed the grub from another distribution (Debian).
I installed it on sda1 vfat.
But I create a folder BOOT so in capital letters.
Then I installed from puppy Grub2config.
but it gives me an error, because it wants to create a boot folder, and gives that it already exists. but the one that exists is in uppercase, and the one it creates is in lowercase.
but in the end it does not create it because it says that it exists, and that gives error and does not install the grub.

@josejp2424
OK. I can reproduce that, after installing LUbuntu. Thanks.

[shinobar]

#2021-08-03 v1.9.9-pre7: install grub2 on /boot.pup/grub to prevent interference with other OS,
# limited support older puppy than xenialpup 7.5

DOWNLOAD grub2config-1.9.9-pre7 from http://shinobar.server-on.net/puppy/opt/test/

Almost a release candidate. Welcome your test and report.

[shinobar]

Scheduling official release on this weekend.
You are encouraged to test the preview 7 and report.
Thank you.

[josejp2424]

Scheduling official release on this weekend.
You are encouraged to test the preview 7 and report.
Thank you.

hi @shinobar .
I had to add 3 libraries, so that I don't get any error. ( efibootmgr, libefiboot1, libefivar1 ).
and it worked very well.

Locale es. grub2config-1.9.9-pre7

thanks excellent work.

MoManager-es-grub2config-1.9.9-pre7.tar.bz2

(3.12 KiB) Downloaded 50 times

[shinobar]

grub2config-2.0 released!
DOWNLOAD from http://shinobar.server-on.net/puppy/opt/

Grub2config installs only the boot loader. You can install Puppies manually or using some tool like Frugalinstaller.
frugalinstaller-2.2 is available at the same place, http://shinobar.server-on.net/puppy/opt/

[josejp2424]

hi @shinobar .

the new grub2config-2.0. does not take certain lines in the translation.

[Ramachandra Iyer]

While installing in Fossapup64, it asks for a password. What is the password sir?

[shinobar]

While installing in Fossapup64, it asks for a password. What is the password sir?

Grub2config does not require any password.

[shinobar]

the new grub2config-2.0. does not take certain lines in the translation.

Sorry, comment out the line 118 and 142 of /usr/sbin/grub2config:

line 118:
splash() {
debug "splash $*"
rm -f $COUNTFILE
[ "$XPID" != "" ] && kill $XPID >/dev/null 2>&1
XPID=""
#LANG=$LANGORG # recover lang environment

line 142:
$GTKDIALOG -p DIALOG -c >/dev/null &
XPID=$!
#LANG=C # to be faster
}

[josejp2424]

the new grub2config-2.0. does not take certain lines in the translation.

Sorry, comment out the line 118 and 142 of /usr/sbin/grub2config:

line 118:
splash() {
debug "splash $*"
rm -f $COUNTFILE
[ "$XPID" != "" ] && kill $XPID >/dev/null 2>&1
XPID=""
#LANG=$LANGORG # recover lang environment

line 142:
$GTKDIALOG -p DIALOG -c >/dev/null &
XPID=$!
#LANG=C # to be faster
}

thanks @shinobar

[Ramachandra Iyer]

While installing in Fossapup64, it asks for a password. What is the password sir?

Grub2config does not require any password.

Sorry, it is for spot password of Fossaup64. Do you know sir?

[rockedge]

you can make the password for "spot" by using this while you are the "root" user. Fill in the new password you choose.
in a terminal ->

Code: Select all

passwd spot

(15).png (31.86 KiB) Viewed 14488 times

[shinobar]

Miner bug fix:
#2021-08-20 v2.0.1: was missing nls, remove pdrv option, downgrade grub to 2.0.2

grub2config-2.0.1.pet
http://shinobar.server-on.net/puppy/opt

[josejp2424]

Miner bug fix:
#2021-08-20 v2.0.1: was missing nls, remove pdrv option, downgrade grub to 2.0.2

grub2config-2.0.1.pet
http://shinobar.server-on.net/puppy/opt

thank you. @shinobar
works very well

[JASpup]

This post per bigpup's suggestion:

Grub2config boots 64/UEFI which is an evolution over G4D.

On my system it doesn't not find alternate partitions.

G4D still does.

I need a combination of the two to create a multipartition boot.

viewtopic.php?f=4&t=3810&p=35334#p35334

[Clarity]

Hi @JASpup

I am curious to what you face with multi-partition access at boot time. I have a single question.

Would/could you, when booting and you arrive a PUP-DOG boot GRUB2 Menu screen, type an 'e' for any menu line, then at the GRUB menu, type 'ls' so; Do you see all partitions on your PC?

Thanks

[JASpup]

Would/could you, when booting and you arrive a PUP-DOG boot GRUB2 Menu screen, type an 'e' for any menu line, then at the GRUB menu, type 'ls' so; Do you see all partitions on your PC?

Under what test conditions should I try this?

Everything works now, but I need UUIDs from G4D.

If I boot this machine, it will be either Grub2config or YUMI.

Does any of this matter for your test?

[Clarity]

Just curious, only. I may have mis-understood but I interpreted couple of your statements to mean that when, at the time of booting a GRUB2 base PUP, it is not capable of seeing your PCs partitions and also not capable of using UUIDs.

I had not seen such and was curious.

[shinobar]

Grub2config boots 64/UEFI which is an evolution over G4D.

Did you check on all the drives to search?

grub2configSS2.png (27.11 KiB) Viewed 14307 times

See the document about options:
http://shinobar.server-on.net/puppy/doc ... ml#options

[JASpup]

Just curious, only. I may have mis-understood but I interpreted couple of your statements to mean that when, at the time of booting a GRUB2 base PUP, it is not capable of seeing your PCs partitions and also not capable of using UUIDs.

Please excuse, I am not a boot expert.

G4D creates a MBR & grub.cfg configuration file that does not boot at all.

I boot from USB.

Yes - GRUB2 will boot on my USB with GRUB2CONFIG MBR and menu.
Yes - It is capable of using UUIDs.

Problem:

GRUB2CONFIG does not create UUID for partitions. It only reads USB.

I do not click "search only this device".

G4D finds all partitions.

[JASpup]

Did you check on all the drives to search?

I might have missed thinking it was for boot installation.

Fear of replacing partition boot

I will check carefully next time arigato.

[Clarity]

Just a note for anyone who thought GRUB2 was missing some functionality: UUID in particular, it is not.

Of course, it can handle it in the Menu used for booting.

But, for some, you can ALSO break from the Menu to its command line (console) and type

Code: Select all

grub> ls -l 

to see UUIDs of all connected storage seen at boot time. Hit the ESC key to return to the PUP's Menu. You can also type "ls" to see a less busy list of the PC storage.

Hope this is helpful understanding.

[JASpup]

typegrub> ls -l to see UUIDs of all connected storage seen at boot time.

I escape out the GRUB menu regularly. Easy apprehension of UUIDs would help - a lot easier than running bootloader apps.

The G2C menu is kind of small. 14pt? Can it easily be increased?

[April]

@shinobar
Perhaps I could suggest any changes and updates you make should always be done in the first post.
This thread could end up being 10 pages long and people will not read through the entire thread usually.

Others here do that and it helps immensely. Thanks.

I wonder why you include windows whether its found or not?
I never have windows on my machine and never want it so i would prefer an option to just drop it.Then again I don't think I have a need/use for Grub4Dos then do I .

[April]

Code: Select all

grub> ls -l 

this code does not work for me ? What am I missing please

[shinobar]

I wonder why you include windows whether its found or not?
I never have windows on my machine and never want it so i would prefer an option to just drop it.Then again I don't think I have a need/use for Grub4Dos then do I .

Windows menu
At least one item of Windows menu are displayed here no matter they are installed or not. Erase the items if you do not need boot up Windows. But this entry is recommended to leave. Especially in case you install the boot loader on removable devices because they might be useful with other PC's.
http://shinobar.server-on.net/puppy/doc ... menutitles

[amethyst]

Just a question out of curiosity, I still use old computers so don't know about these secure boot thingys. My question with regards to Grub4Dos: 1. This can still be used on a new machine even if it is a UEFI boot machine but you will have to change to legacy boot in the BIOS (and secure boot turned-off). I suppose changing the setting to legacy turns off secure boot automatically? 2. You can't boot an ext4 partition. So in short: Grub4Dos will still work if you (can) change to legacy boot and not use ext4 filesystem for your Puppy installation (but you can have another ext4 filesystem for storage for example as long as the bootloader does not boot files from it). Is this correct? Also - will there be instances where it will be impossible to switch to legacy boot mode?

[Jafadmin]

Code: Select all

grub> ls -l 

this code does not work for me ? What am I missing please

This is for Grub. Pressing 'c' from a grub boot menu will drop you to the 'grub>' command line prompt. Typing 'ls' (list) dash plus lowercase 'L' (ps -l) should display all the disks the BIOS can detect.

I do not believe the 'ls' command works with Grub4Dos.

[shinobar]

... My question with regards to Grub4Dos: ...

@amethyst
You are right at this point of time. You can still use the Grub4Dos with legacy BIOS mode (CSM) if you carefully avoid its limitation.

After 2012, Windows 8(64) pre-installed PC 's are shipped with UEFI/GPT system. They can switched to legacy BIOS compatible mode called CSM, in condition the HDD to be re-formatted with ms-dos partition table because CSM cannot boot up GPT.

But from 2021 and near future, new PC and mother boards can be shipped without CSM support.

As for the Grub4Dos is not updated long time. The developers moved to Grub2. Grub4DosConfig too will not be updated now on because Grub2config can replace. You are encouraged to switch to the Grub2config.