Lately xine has become kind of buggy. It was installed about 5 years ago on this machine and is probably an older version, but I need to remove it and replace it with what the PPM update shows as current. How do I remove it if the PPM's uninstall doesn't let me? I get the message that it can't be uninstalled because other file are dependent.
How to remove xine from slacko 6.0?
Moderator: Forum moderators
- taersh
- Posts: 951
- Joined: Tue Jul 07, 2020 11:13 pm
- Location: Germany
- Has thanked: 53 times
- Been thanked: 119 times
Re: how to remove xine from slacko 6.0
Why would there be a need to remove it before updating to the current version?
Why not just updating?
My Music:
https://soundcloud.com/user-633698367
Using my own build of Bionic64
The far-left is as fascist as the far-right is!
Re: How to remove xine from slacko 6.0?
OK, I thought that this was the place to come for help. Never mind.
- Wiz57
- Moderator
- Posts: 700
- Joined: Fri Dec 13, 2019 3:54 pm
- Location: Chickasha, OK USA
- Has thanked: 93 times
- Been thanked: 160 times
Re: How to remove xine from slacko 6.0?
I could be wrong (wouldn't be the first time) but I was under the impression that updating an installed
program via PPM would replace the previous version's files, sort of like uninstalling the older version
first then installing newer??? Someone with more detailed use experience with PPM might weigh in here...
I just go by what I've seen in message boxes while PPM does its things.
Wiz
Signature available upon request
Re: How to remove xine from slacko 6.0?
Wiz57 wrote: Sun Jun 13, 2021 11:43 amI could be wrong (wouldn't be the first time) but I was under the impression that updating an installed
program via PPM would replace the previous version's files, sort of like uninstalling the older version
first then installing newer??? Someone with more detailed use experience with PPM might weigh in here...
I just go by what I've seen in message boxes while PPM does its things.
Wiz
That's what @taersh suggested - packed in a question, what the OP disliked ...
peace
- OscarTalks
- Posts: 623
- Joined: Tue Jul 14, 2020 10:11 pm
- Location: London UK
- Has thanked: 2 times
- Been thanked: 247 times
Re: How to remove xine from slacko 6.0?
2dees,
The messages you are reporting do seem strange. Perhaps it might help if you could post screenshots of anything you are seeing, plus details of your installed xine package(s). The only thing I can think of is that xine is 2 packages, xine-ui and xine-lib. Since xine-ui depends on xine-lib, if you try to uninstall xine-lib first, the package manager may alert you that it is needed by xine-ui. Otherwise, if you uninstall in the correct order, the Package manager should not prevent you from uninstalling.
Folk here almost always try to be as helpful as possible. Please try to remember that others are often running different Puppy versions and they (we) can not see everything that you are seeing.
Re: How to remove xine from slacko 6.0?
"I could be wrong (wouldn't be the first time) but I was under the impression that updating an installed
program via PPM would replace the previous version's files, sort of like uninstalling the older version
first then installing newer??? Someone with more detailed use experience with PPM might weigh in here...
I just go by what I've seen in message boxes while PPM does its things.
Wiz"
Thanks for addressing my question. PPM seems to have changed the way this has been displayed since the recent update I did to get the current version. Before the update, PPM would display what packages were already installed. Now it displays a list of packages that may or may not be what I wanted. I actually installed the Xine ui that was shown as being current, and now the fullscreen includes the taskbar, which isn't good for viewing the video playback window. I thought that maybe the older version needed to be removed, or the libraries that serve the old version were interfering, still PPM doesn't show the newer ui as being installed, though I did install it.
Re: How to remove xine from slacko 6.0?
"Since xine-ui depends on xine-lib, if you try to uninstall xine-lib first, the package manager may alert you that it is needed by xine-ui. Otherwise, if you uninstall in the correct order, the Package manager should not prevent you from uninstalling."
PPM is not allowing the removal of either the ui or the libraries, giving the same message.
- Wiz57
- Moderator
- Posts: 700
- Joined: Fri Dec 13, 2019 3:54 pm
- Location: Chickasha, OK USA
- Has thanked: 93 times
- Been thanked: 160 times
Re: How to remove xine from slacko 6.0?
Is there a pressing need to stay with Slacko 6.0? The reason I ask, Xine relies on libraries from other
packages, such as FFMPEG, and Slacko 6.0 might not have compatible libraries with an updated Xine.
Depending on your hardware, and installation method, you might be better served with a tad newer
Slacko. The last one of the "6" series I used was 6.3.2, which I still have frugally installed on this old
netbook, but run it very seldom now as the libraries required to get a decent web browsing experience
just aren't available. Not sure which Xine version is in 6.3.2, but it might be more to your satisfaction.
For more recommendations, can you list what your computer's specifications are? Like amount of RAM,
CPU, etc. There were some ScPup 32 bit releases that could possibly offer decent results. Also, I used
one of the early Slacko 7 Release Candidates that performed pretty well, could possibly be coerced into
making it available for download if not still in an archive.
Wiz
Signature available upon request
Re: How to remove xine from slacko 6.0?
Slacko 6.0 is the most stable on the old machines I run. I'm intending to download 7.0 and give it a try, but I like slacko better than the other puppy versions I tried before settling on slacko. Anyway, I read up on xine settings and have gotten the fullscreen issue settled. I'm going to call this one fixed for now. Thanks, everybody.
Re: How to remove xine from slacko 6.0?
2dees wrote: Sat Jun 12, 2021 5:47 pmLately xine has become kind of buggy. It was installed about 5 years ago on this machine and is probably an older version, but I need to remove it and replace it with what the PPM update shows as current. How do I remove it if the PPM's uninstall doesn't let me? I get the message that it can't be uninstalled because other file are dependent.
I'm not familiar with slacko 6.0 but there should be a packages directory in one of the following places
either
/root/.packages (note the dot in front of "packages"
or
/var/packages
Those directories keep records of what you have installed via *package-name*.files records, which are text files.
Probably there will be a file named something like xine-xxx.files (or whatever package you are looking for)
Open that file as a text file, it will show where all the files for the package were installed to.
If the package is smallish then there will be few files to chase down and delete.
If the package is large there could be many files to chase down and delete.
Posted this to answer your original question since it was never answered.
-
Re: How to remove xine from slacko 6.0?
"Posted this to answer your original question since it was never answered."
Thank you. That seems to get to the bottom of the removal process. I'll look into that and if the library files (which should be the most extensive) are simple to delete, I could do that, or I might just do a clean reinstall of the o/s if it looks like I'll be chasing too many files.
Regards, Edd
- bigpup
- Moderator
- Posts: 7298
- Joined: Tue Jul 14, 2020 11:19 pm
- Location: Earth, South Eastern U.S.
- Has thanked: 951 times
- Been thanked: 1615 times
Re: How to remove xine from slacko 6.0?
The version of PPM you are using could be part of the problem.
What version is it?
There has been a lot of improvements to PPM over the last few years.
Also Slacko 6.0 was a beta release for bug fixing and testing.
It was not the finished Slacko 6 series version.
The final finished release version was Slacko 6.3.2
The things you do not tell us, are usually the clue to fixing the problem.
When I was a kid, I wanted to be older.
This is not what I expected
Re: How to remove xine from slacko 6.0?
The PPM says v2. I have 6.0 frugalled on several machines, mainly my Dell 780s. On the Dell Optiplex 780's mainboard it's Intel Core 2 Duo CPU E7500 @ 2.93GHz, with 4gig memory. I've been reading the threads on the slacko 7.0, which is what I thought was the final edition. I'll also look at 6.3.2 and I may install 7.0 on one of my Optiplex 780 machines to see how it does.
Mick has done some very helpful work for users of these older machines. Slacko 6.0 has been stable on the 780 I'm using now, and all I use this one for is web surfing and CD/DVD playback and burning. My 780 is much faster than my wife's Win10 w/16gig RAM, but that isn't surprising to anyone who uses a Puppy distro.
Thanks for joining in here.
Edd