Page 1 of 17

QuickPup64 24.01 RC4

Posted: Tue Jun 08, 2021 8:36 am
by mistfire

This is the all 64-bit version of QuickPup built from ScPup64, Slackware Current packages, Debian Sid packages, Opensuse Tumbleweed, and Fedora Rawhide packages.

Features:

  • XFCE Desktop Environment
  • Modular design
  • Seamonkey browser (in sfs module)
  • Better support on electron apps and third-party commercial linux apps.
  • PipeWire for soundcard management
  • Improved puppy under the hood
  • Bluetooth and IrDA connectivity
  • NetworkManager as default network management for ease of use
    -- With VPN support (PPTP, L2TP, IPSEC, OpenVPN, SSTP)
  • Fax support
  • Upower for power management
  • With GTK+3, GTK+4, and libadwaita library to support newer apps
  • With Desktop Environment switcher
  • Improved Puppy Remastered Setup
  • Builtin flatpak support (with flatpak-installer helper for easier setup)
  • Sandboxed underdog linux capable
  • AppImage support (Just double click the AppImage file to run)
  • Vulkan included
  • Improved package management.
    -- With package updater (experimental)
    -- Wider package support. Aside from PET, Debian (DEB), Red Hat (RPM), Slackware (TXZ, TGZ), and Arch Linux packages (PKG.TXZ).
    It also accepts the following packages (natively installed, no more package conversion needed. This allows to utilize almost all available linux packages):
    ->Slitaz (.tazpkg)
    ->Tiny Core (
    .tcz,.tce,.tcel,.tcem)
    ->Pardus (
    .pisi)
    ->Alpine Linux (.apk)
    ->Slax (
    .sb)
    ->OpenWRT (.ipk)
    ->0linux (
    .spack)
    ->Void linux (.xbps)
    ->Damn Small Linux (
    .dsl)
    ->Puppyrus (.pfs)
    ->Nutyx (
    .cards.tar.xz)
    ->Solus (.eopkg)
    ->Stampede (
    .slp)
    ->Porteus (.xzm,.lzm)
    ->Gentoo precompiled package (.xpak)
    ->Paldo Linux
    ->Venom Linux (
    .spkg.txz)

Known issues:

  • Thunar sometimes crashes randomly (Moving large files is not advisable. Copy files first then delete the source files afterwards).

Download: https://1drv.ms/u/s!As14nV96TZw0gX4I1xP ... T?e=NzSZZn
Mirror: https://teraboxapp.com/s/1V8JBvtxmf2ng4T4yHRUjVA

Firmware driver pack (for additional hardware support): https://drive.google.com/file/d/1-13ftH ... sp=sharing

Language Pack: https://drive.google.com/file/d/1O6nsZF ... sp=sharing

DISCLAIMER: The developer has no any responsibility for data loss from using this derivative distro. USE IT UNDER YOUR OWN RISK


Re: QuickPup64 21.06 BETA

Posted: Wed Jun 09, 2021 8:33 am
by ronriel

@mistfire ,
I gave this a try and it worked and is usable. I installed it frugally on an SSD. However, i noticed the ff unusual behavior.

1. Shutting down takes too long. Takes a minute maybe. Savefile used is a 2GB 4fs. I restarted it, then shutdown immediately, same issue encountered.
2. Changing window style is not as smooth as expected. Dialog Window doesn't change. I'll try other styles, maybe this is just a theme issue.
3. Tray icons overlaps with each other.

That was just a quick ride. I'll report other issues I will encounter. Overall, hes a good puppy. :thumbup2:


Re: QuickPup64 21.06 BETA

Posted: Wed Jun 09, 2021 10:16 am
by mistfire
ronriel wrote: Wed Jun 09, 2021 8:33 am

@mistfire ,
I gave this a try and it worked and is usable. I installed it frugally on an SSD. However, i noticed the ff unusual behavior.

1. Shutting down takes too long. Takes a minute maybe. Savefile used is a 2GB 4fs. I restarted it, then shutdown immediately, same issue encountered.
2. Changing window style is not as smooth as expected. Dialog Window doesn't change. I'll try other styles, maybe this is just a theme issue.
3. Tray icons overlaps with each other.

That was just a quick ride. I'll report other issues I will encounter. Overall, hes a good puppy. :thumbup2:

Creating a savefile in first shutdown really tooks a long time for big filesize unless you use savefolder.

Regarding dialog theming, gtkdialog, yad, Xdialog, and gxmessage uses GTK2 while XFCE uses GTK3. So you need to use GTK2 theme switcher included on QuickPup64.

Thanks for compliment


Re: QuickPup64 21.06 BETA

Posted: Thu Jun 10, 2021 5:47 am
by Clarity

Hello @mistfire

The boot stanza of this beta matches the WoofCE PUPs. :thumbup:

But, there are issues where it will not boot directly from the ISO file via other boot-helpers like SG2D. SG2D finds the ISO file and present its for selection, but the boot fails no matter if I boot via PC's UEFI or BIOS approach. (screenshots follow)

QuickPUP64-booterr.gif
QuickPUP64-booterr.gif (445.33 KiB) Viewed 77113 times

Failing, above, ...
I created a CDRW from the ISO and attempting to boot to RAM with the CD, it fails with

Code: Select all

Error 15:(http://grub4dos.chenall.net)
File not found

Press any key to ...

Thus will not boot.


Re: QuickPup64 21.06 BETA

Posted: Thu Jun 10, 2021 8:29 am
by mistfire
Clarity wrote: Thu Jun 10, 2021 5:47 am

Hello @mistfire

The boot stanza of this beta matches the WoofCE PUPs. :thumbup:

But, there are issues where it will not boot directly from the ISO file via other boot-helpers like SG2D. SG2D finds the ISO file and present its for selection, but the boot fails no matter if I boot via PC's UEFI or BIOS approach. (screenshots follow)

QuickPUP64-booterr.gif

Failing, above, ...
I created a CDRW from the ISO and attempting to boot to RAM with the CD, it fails with

Code: Select all

Error 15:(http://grub4dos.chenall.net)
File not found

Press any key to ...

Thus will not boot.

Oh my! I forgot to replace initrd.gz with initrd.xz on boot configurations. To temporarily fix this issue edit the boot entry and replace initrd.gz with initrd.xz then boot the iso. I will reupload the iso file within few days


Re: QuickPup64 21.06 BETA

Posted: Fri Jun 11, 2021 9:05 pm
by Clarity

A test:

  1. Modified each line-entry in the loopback.cfg & grub.cfg to initrd.xz vs. initrd.gz.

  2. ISOmaster used to update the ISO replacing the old files with the changes

  3. Attempt at booting with new-changed files on an Intel BIOS

  4. SG2D presents the ISOs

  5. QuickPUP64 selected and at QuickPUP64 Menu, pfix=RAM entry attempted

  6. QuickPUP64 starts its boot, then this

QuickPUP64 boot err.jpg
QuickPUP64 boot err.jpg (26.67 KiB) Viewed 77069 times

Re: QuickPup64 21.06 BETA

Posted: Fri Jun 11, 2021 9:55 pm
by mistfire
Clarity wrote: Fri Jun 11, 2021 9:05 pm

A test:

  1. Modified each line-entry in the loopback.cfg & grub.cfg to initrd.xz vs. initrd.gz.

  2. ISOmaster used to update the ISO replacing the old files with the changes

  3. Attempt at booting with new-changed files on an Intel BIOS

  4. SG2D presents the ISOs

  5. QuickPUP64 selected and at QuickPUP64 Menu, pfix=RAM entry attempted

  6. QuickPUP64 starts its boot, then this

QuickPUP64 boot err.jpg

1. Select SAVE TEMP FILES
2. Choose partition where to save the files. A tarball will be created
3. Boot other puppy and upload the tarball here


Re: QuickPup64 21.06 BETA

Posted: Fri Jun 11, 2021 10:40 pm
by Clarity

Attached


Re: QuickPup64 21.06 BETA

Posted: Sat Jun 12, 2021 1:30 am
by TerryH

Created a new manual frugal install on internal SSD with UEFI boot. Apart from issues you have identified in first post, all running well. I have installed libreoffice7.1.3.2.sfs and running portable vivaldi browser. Nice work mistfire. Thank you.


Re: QuickPup64 21.06 BETA 2

Posted: Sat Jun 12, 2021 5:11 am
by mistfire

(post moved)


Re: QuickPup64 21.06 BETA

Posted: Sat Jun 12, 2021 6:25 am
by mistfire
Clarity wrote: Fri Jun 11, 2021 10:40 pm

Attached

Upon reading the logs. That's weird that sr0 detected but returned 0? Where did you boot that?

Code: Select all

/dev/sda1|ntfs|59077632
/dev/sda2|ext4|20971520
/dev/sda3|ntfs|67848192
/dev/sda4|none|1
/dev/sda5|ext2|8389632
/dev/sdb1|exfat|7863279
/dev/sdb2|vfat|32768
/dev/sr0|none|0

Re: QuickPup64 21.06 BETA 2

Posted: Sat Jun 12, 2021 6:26 am
by mistfire

QuickPup 21.06 BETA 2 released

Changes:
* Added late-loading microcode on boot
* Some fixes

NOTE: To apply microcode, install amd/intel microcode package. To apply microcode immediately without reboot, type this command on terminal then press ENTER

Code: Select all

update-microcode

Download: https://drive.google.com/file/d/1t_KJpA ... sp=sharing
MD5 Checksum: 471c746905ce57b6752c7aab513f0b3a


Re: QuickPup64 21.06 BETA 2

Posted: Sat Jun 12, 2021 9:09 am
by Clarity

Code: Select all

/dev/sdb1|exfat|7863279
/dev/sdb2|vfat|32768

Boot-Manager on sdb2 while ISO file in /BOOTISOS on sdb1

This is a very unique problem not seen on any prior ISO file booting over past 2 years. The same problem occurs when attempting to boot via 2 different ISO file booters.

I am sure that there is an answer, but ???.

I can make an image file of the USB if that will help you replicate the problem on your end.

BTW: This ISO file boots and runs "fine" in a KVM (QEMU).


Re: QuickPup64 21.06 BETA 2

Posted: Sun Jun 13, 2021 2:32 am
by TerryH

Hi mistfire,

I know you had some issues with pupMTP, when using SCPup64. pupMTP (and also pupCamera) currently doesn't function correctly in Quickpup64. When my Samsung phone is connected it returns a message that no devices found.

I don't know which actual ScPup64 -21.04 you based Quichpup64 on, but I get the same results with ScPup64 21.04+2. On SPup64-21.04+3 pupMTP functions correctly, accessing my Samsung S10e phone.

The attached screenshot is using Quickpup64 beta2. It doesn't return an error code, just shows it can't access the phone.


Re: QuickPup64 21.06 BETA 2

Posted: Sun Jun 13, 2021 5:17 am
by Clarity

This does NOT address the MTP problem. Rather, this is a post of how I get around this problem.

There are several ways to transfer information between a PUP and a smart-phone; namely Bluetooth, wired, or Wifi. For Wifi, I have used the following for past 4-5 years: (if I leave out something below, please correct anything missing)

Requirement:

  1. Wifi active on your home's LAN,

  2. PC & Phone on the same IP LAN (subnet),

  3. A filemanager on the phone which is LAN aware

PUPPY
Nothing need be installed on any modern PUP or FATDOG as they already have SAMBA.

  1. On your PUP

    • Start SAMBA (Menu>network>Samba Simple Management)

    • Note the SAMBA PC's IP address

  2. On the phone

    1. Open your file manager

    2. Navigate to the Network section

    3. Either browse (if available) or setup a SAMBA location via the "noted" IP address

Transfer information to/from your phone as you need.

P.S. I DO RECOGNIZE that not every household has Wifi ability via their router.


Re: QuickPup64 21.06 BETA 2

Posted: Sun Jun 13, 2021 6:33 am
by mistfire
TerryH wrote: Sun Jun 13, 2021 2:32 am

Hi mistfire,

I know you had some issues with pupMTP, when using SCPup64. pupMTP (and also pupCamera) currently doesn't function correctly in Quickpup64. When my Samsung phone is connected it returns a message that no devices found.

I don't know which actual ScPup64 -21.04 you based Quichpup64 on, but I get the same results with ScPup64 21.04+2. On SPup64-21.04+3 pupMTP functions correctly, accessing my Samsung S10e phone.

The attached screenshot is using Quickpup64 beta2. It doesn't return an error code, just shows it can't access the phone.

Did you enable MTP on your phone settings?


Re: QuickPup64 21.06 BETA 2

Posted: Sun Jun 13, 2021 3:31 pm
by TerryH

Yes, the comparisons with Scpup64 I mentioned were done yesterday while testing pupmtp in quickpup64.

Also, when I plug the phones USB cable to the PC the probing devices message is displayed, but pupmtp fails to find the phone.


Re: QuickPup64 21.06 BETA 2

Posted: Tue Jun 15, 2021 1:13 am
by mistfire
TerryH wrote: Sun Jun 13, 2021 3:31 pm

Yes, the comparisons with Scpup64 I mentioned were done yesterday while testing pupmtp in quickpup64.

Also, when I plug the phones USB cable to the PC the probing devices message is displayed, but pupmtp fails to find the phone.

Try to install libmtp and simple-mtpfs from other distro's especially from Arch, Fedora Rawhide, Slackware Current, and Mageia Cauldron


Re: QuickPup64 21.06 BETA 2

Posted: Tue Jun 15, 2021 1:27 am
by TerryH
mistfire wrote: Tue Jun 15, 2021 1:13 am
TerryH wrote: Sun Jun 13, 2021 3:31 pm

Yes, the comparisons with Scpup64 I mentioned were done yesterday while testing pupmtp in quickpup64.

Also, when I plug the phones USB cable to the PC the probing devices message is displayed, but pupmtp fails to find the phone.

Try to install libmtp and simple-mtpfs from other distro's especially from Arch, Fedora Rawhide, Slackware Current, and Mageia Cauldron

Thanks for the update, I have several installations with functioning mtp applications, or I can use other means to access my phone, I don't need to install from other distros at this stage.


Re: QuickPup64 21.06 BETA 2

Posted: Tue Jun 22, 2021 5:16 am
by esos

have some errors:

Gparted is not useable

Gparted130error.png
Gparted130error.png (19.75 KiB) Viewed 67077 times

Draw Drawing of libreoffice7.1.3.2 error

Draw Drawing error.png
Draw Drawing error.png (21.12 KiB) Viewed 67077 times

Search error

search-error.png
search-error.png (53.6 KiB) Viewed 67077 times

Re: QuickPup64 21.06 BETA 2

Posted: Wed Jun 23, 2021 11:29 pm
by mistfire
esos wrote: Tue Jun 22, 2021 5:16 am

have some errors:

Gparted is not useable
Gparted130error.png
Draw Drawing of libreoffice7.1.3.2 error
Draw Drawing error.png
Search error
search-error.png

That all errors that you encountered was in Pristine state (without loading save file)?

Regarding searching /proc is a special mountpoint for kernel process. Always avoid including that path on searching


Re: QuickPup64 21.06 BETA 2

Posted: Sun Jul 04, 2021 6:21 am
by esos

I think Gparted v1.3 is not ready for release. The results of booting from iso or frugal (internal or external) with/without save file come out with the same error.


Re: QuickPup64 21.08 BETA 1

Posted: Sun Aug 08, 2021 11:47 pm
by mistfire

QuickPup64 21.08 BETA 1 released

Changes:
* Microcode loading suppport (late loading)
* Improved package updater
* Improved package manager
* Bugfix on puppy remaster script
* Fixed builtin files list which causes system failure upon updating packages
* Updated builtin packages
* Uget was moved to BDRV due to gstreamer dependency

Download: https://drive.google.com/file/d/1jSTJlp ... sp=sharing
MD5 Checksum: 1d5a2af1a53827800cdb89a2201633de


Re: QuickPup64 21.08 BETA 1

Posted: Wed Aug 11, 2021 3:20 am
by esos

Just compared (frugal) quickpup64_21.08-beta-1 vs.
quickpup64_21.06-beta-2

Both still have problem:
Draw Drawing of libreoffice does not work.
Thunar keeps crashing (quit without error message)

Pulse Audio quickpup64_21.06 works fine on all browsers
Vivaldi 4.0.2312.27, Brave 1.28.70 and Firefox 91.0

Pulse Audio quickpup64_21.08 works fine only on Firefox.


Re: QuickPup64 21.08 BETA 1

Posted: Thu Aug 12, 2021 4:04 am
by mistfire
esos wrote: Wed Aug 11, 2021 3:20 am

Just compared (frugal) quickpup64_21.08-beta-1 vs.
quickpup64_21.06-beta-2

Both still have problem:
Draw Drawing of libreoffice does not work.
Thunar keeps crashing (quit without error message)

Pulse Audio quickpup64_21.06 works fine on all browsers
Vivaldi 4.0.2312.27, Brave 1.28.70 and Firefox 91.0

Pulse Audio quickpup64_21.08 works fine only on Firefox.

Can I have the libreoffice apps that you used? (in package or sfs)
What did you do before the thunar crashed?


Re: QuickPup64 21.08 BETA 1

Posted: Thu Aug 12, 2021 8:45 am
by peebee

I have also seen and mentioned the 64bit Thunar crash problem when using my ydrv Xfce add on
It happens randomly when opening a folder
No error messages are produced to give any clues


Re: QuickPup64 21.08 BETA 1

Posted: Fri Aug 13, 2021 1:26 am
by esos

I tested some versions of LibreOffice64 (.pet & .sfs).
Download from:
viewtopic.php?f=96&t=404

About Thunar: peebee mentioned above.

Sofar ok replace with pcmanfm-1.3.1


Re: QuickPup64 21.08 BETA 1

Posted: Fri Aug 13, 2021 1:32 am
by esos

Not sure what kind of "Bugfix on puppy remaster script".
I tested to remaster ISO.
After remastered vivaldi and brave browsers are not working anymore.
Only firefox working but all my personal setting are gone.
Many custom settings go back to original default e.g Screen resolution, network connection, speaker volume etc.


Re: QuickPup64 21.08 BETA 1

Posted: Wed Aug 18, 2021 1:04 pm
by mistfire
esos wrote: Wed Aug 11, 2021 3:20 am

Draw Drawing of libreoffice does not work.

I finally found the solution. All you need was to install avahi runtime library
https://download-ib01.fedoraproject.org ... x86_64.rpm


Re: QuickPup64 21.08 BETA 1

Posted: Fri Aug 20, 2021 4:13 am
by esos

Thanks, finally draw & impress work :thumbup2: