HP Printer Problems in Dunfell 2.7.3 - Update 9/28/21 'NOT SOLVED'

Moderator: BarryK

Post Reply
User avatar
sszindian
Posts: 19
Joined: Sun Jul 19, 2020 5:29 pm

HP Printer Problems in Dunfell 2.7.3 - Update 9/28/21 'NOT SOLVED'

Post by sszindian »

Easy Dunfell64 2.6.2

HP Printer 3056a All-In-One

Tried many hp drivers ... 'No Print' In Easy Buster the old Tahr64 drivers work just fine for print & scan but not in Dunfell, they all show a 'Filter Failure'... Any suggestions or help appreciated.

>>>---Indian------>

EDIT 04/14/21:

With Dunsfell64 2.7

Driver, hplip_print_scan_tahr64-3.15.9.pet 'with' cups-filters-1.28.3-1-dunfell64.pet gets my hp3056A working!!! Others with hp print problems from previous Dunfell versions might want to try this combo?

Don't know what you did in 2.7 Barry,but 'Thanks!'

>>>---Indian------>

Another UPDATE 04/15/21

Oh Boy... here we go again... I said above... the hplip_print_scan_tahr64-3.15.9.pet got my printer working... well when I tested it after installing this driver, my printer DID print out a test-page so I figured all was well... 'Not The Case' Further testing today would not produce a 'print' of anything. Deleting this driver and installing several other hplip's I finally hit on one... hplip_3.20.3+dfsgO that seems to be working OK (at least for now) on my printer. If anything changes I'll post here about it.

>>>---Indian------>

Update 04/17/21
hplip_3.20.3+dfsgO stopped printing as did hplip_print_scan_tahr64-3.15.9.pet, so we're back to the drawing boards at least with this issue and my printer.

>>>---Indian------>

Update 4/20/21
With the new 2.7.1, hplip_3.20.3+dfsgO appears to 'presently' be working maybe that new thing Barry put in for the Samsung fixed the HP printers as well... time will tell !!! again, 'Thanks Barry' Easy Dunsfell64 looks like a super-duper operating system!

>>>---Indian------>

Update 4/23/21
With the new 2.7.1, hplip_3.20.3+dfsgO Again STOPPED PRINTING... no doubt, we have some printer issues in Dunsfell 2.7.1... EasyOS 'Buster' continues to print and work well!

\>>>---Indian------>

Update 4/24/21
The new Dunsfell 2.7.2 still doesn't correct HP printer problem... 'Failed filter' still occurs.

Update 5/10/21
Latest Dunsfell 2.7.3 has same printing issues as previous versions (above) and act the same as those mentioned above... It appears no one else is using an HP printer with Dunsfell with some good advise (kind of hard to believe with all the downloads of EasyOS Dunsfell at Distrowatch?) This will be my last update on the subject of HP Printing and Easy Dunsfell !

Update 9/03/21
It appears that the hplip for HP printers is fixed in the new version 2.9 !!

:thumbup2: Barry

Update 9/28/32
The post just above this one is correct, after installing 2.9 my hp printer did it's thing and printed a beautiful test page from within cups... BUT... after a reboot of 2.9, the hp printer does NOT print and gives a failed filter in cups. So what we have here appears to be that everything Barry included in the hplip update in version 2.9 is correct, Dunsfell just can't seem to retain it after a shutdown or reboot?

>>>---Indian------>

Last edited by sszindian on Tue Sep 28, 2021 7:22 pm, edited 11 times in total.
williwaw
Posts: 1957
Joined: Tue Jul 14, 2020 11:24 pm
Has thanked: 172 times
Been thanked: 371 times

Re: HP Printer Problems

Post by williwaw »

I have my printer working from my laptop, which runs buster 2.3.8. In that install. I simply added my printers .ppd to /usr/share/cups/model.

with Dunfell 0.103 and Buster 2.53 on my desktop, I have had the "filter failure" error also. That non specific error leaves me unable to troubleshoot further.

The error log below includes the time frame in the setup where I found the printer in the cups wizard at http://localhost:631/admin, selected the printer from the dropdown, etc, and finally, tried to print a test page using the feature under the maintenance tab.

Code: Select all


I [09/Apr/2021:14:41:02 -0800] [Client 93] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=1803, file=15)
I [09/Apr/2021:14:41:02 -0800] [Client 94] Started "/usr/lib/cups/daemon/cups-deviced" (pid=1804, file=16)
E [09/Apr/2021:14:41:02 -0800] [CGI] Unable to execute ippfind utility: No such file or directory
I [09/Apr/2021:14:41:08 -0800] [Client 96] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=1851, file=15)
I [09/Apr/2021:14:41:19 -0800] [Client 98] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=1872, file=15)
I [09/Apr/2021:14:41:19 -0800] [Client 99] Started "/usr/lib/cups/daemon/cups-driverd" (pid=1873, file=16)
I [09/Apr/2021:14:41:19 -0800] [cups-driverd] Read \"/var/cache/cups/ppds.dat\", 48 PPDs...
I [09/Apr/2021:14:41:19 -0800] [cups-driverd] No new or changed PPDs...
E [09/Apr/2021:14:41:19 -0800] [CGI] Unable to execute ippfind utility: No such file or directory
I [09/Apr/2021:14:41:33 -0800] [Client 101] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=1893, file=15)
I [09/Apr/2021:14:41:33 -0800] [Client 102] Started "/usr/lib/cups/daemon/cups-driverd" (pid=1894, file=16)
I [09/Apr/2021:14:41:33 -0800] [cups-driverd] Read \"/var/cache/cups/ppds.dat\", 48 PPDs...
I [09/Apr/2021:14:41:33 -0800] [cups-driverd] No new or changed PPDs...
E [09/Apr/2021:14:41:33 -0800] [CGI] Unable to execute ippfind utility: No such file or directory
I [09/Apr/2021:14:41:44 -0800] [Client 104] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=1914, file=15)
I [09/Apr/2021:14:41:44 -0800] Setting Samsung_ML-2010 device-uri to "usb://Samsung/ML-2010?serial=3A61BKEYA23203T." (was "file:///dev/null".)
I [09/Apr/2021:14:41:44 -0800] Setting Samsung_ML-2010 printer-is-accepting-jobs to 1 (was 0.)
I [09/Apr/2021:14:41:44 -0800] Setting Samsung_ML-2010 printer-is-shared to 0 (was 1.)
I [09/Apr/2021:14:41:44 -0800] Setting Samsung_ML-2010 printer-state to 3 (was 5.)
W [09/Apr/2021:14:41:44 -0800] CreateProfile failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files
I [09/Apr/2021:14:41:44 -0800] Registering ICC color profiles for "Samsung_ML-2010".
W [09/Apr/2021:14:41:44 -0800] CreateDevice failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files
I [09/Apr/2021:14:41:44 -0800] New printer "Samsung_ML-2010" added by "anonymous".
I [09/Apr/2021:14:41:47 -0800] [Client 106] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=1931, file=15)
W [09/Apr/2021:14:41:47 -0800] CreateProfile failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files
I [09/Apr/2021:14:41:47 -0800] Registering ICC color profiles for "Samsung_ML-2010".
W [09/Apr/2021:14:41:47 -0800] CreateDevice failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files
I [09/Apr/2021:14:41:47 -0800] Printer "Samsung_ML-2010" modified by "anonymous".
I [09/Apr/2021:14:41:52 -0800] [Client 108] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=1932, file=13)
I [09/Apr/2021:14:41:52 -0800] [Client 108] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=1933, file=13)
I [09/Apr/2021:14:41:57 -0800] [Client 111] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=1949, file=15)
I [09/Apr/2021:14:41:57 -0800] [Job ???] Request file type is application/vnd.cups-pdf-banner.
I [09/Apr/2021:14:41:57 -0800] [Job 7] Adding start banner page "none".
I [09/Apr/2021:14:41:57 -0800] [Job 7] Adding end banner page "none".
I [09/Apr/2021:14:41:57 -0800] [Job 7] File of type application/vnd.cups-pdf-banner queued by "anonymous".
I [09/Apr/2021:14:41:57 -0800] [Job 7] Queued on "Samsung_ML-2010" by "anonymous".
I [09/Apr/2021:14:41:57 -0800] [Job 7] Started filter /usr/lib/cups/filter/bannertopdf (PID 1950)
I [09/Apr/2021:14:41:57 -0800] [Job 7] Started filter /usr/lib/cups/filter/pdftopdf (PID 1951)
I [09/Apr/2021:14:41:57 -0800] [Job 7] Started filter /usr/lib/cups/filter/gstoraster (PID 1952)
I [09/Apr/2021:14:41:57 -0800] [Job 7] Started filter /usr/lib/cups/filter/rastertospl (PID 1953)
I [09/Apr/2021:14:41:57 -0800] [Job 7] Started backend /usr/lib/cups/backend/usb (PID 1954)
I [09/Apr/2021:14:41:57 -0800] [Job 7] Hint: Try setting the LogLevel to "debug" to find out more.
E [09/Apr/2021:14:41:58 -0800] [Job 7] Unable to open raster stream - : Broken pipe
I [09/Apr/2021:14:41:58 -0800] [Job 7] Hint: Try setting the LogLevel to "debug" to find out more.
I [09/Apr/2021:14:41:59 -0800] [Client 113] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=1963, file=13)
E [09/Apr/2021:14:42:06 -0800] [Job 7] Job stopped due to filter errors; please consult the /var/log/cups/error_log file for details.
D [09/Apr/2021:14:42:06 -0800] [Job 7] The following messages were recorded from 02:41:57 PM to 02:42:06 PM
D [09/Apr/2021:14:42:06 -0800] [Job 7] Applying default options...
D [09/Apr/2021:14:42:06 -0800] [Job 7] hold_until=0
D [09/Apr/2021:14:42:06 -0800] [Job 7] time-at-processing=1618008117
D [09/Apr/2021:14:42:06 -0800] [Job 7] 4 filters for job:
D [09/Apr/2021:14:42:06 -0800] [Job 7] bannertopdf (application/vnd.cups-pdf-banner to application/pdf, cost 32)
D [09/Apr/2021:14:42:06 -0800] [Job 7] pdftopdf (application/pdf to application/vnd.cups-pdf, cost 66)
D [09/Apr/2021:14:42:06 -0800] [Job 7] gstoraster (application/vnd.cups-pdf to application/vnd.cups-raster, cost 99)
D [09/Apr/2021:14:42:06 -0800] [Job 7] rastertospl (application/vnd.cups-raster to printer/Samsung_ML-2010, cost 0)
D [09/Apr/2021:14:42:06 -0800] [Job 7] job-sheets=none,none
D [09/Apr/2021:14:42:06 -0800] [Job 7] argv[0]="Samsung_ML-2010"
D [09/Apr/2021:14:42:06 -0800] [Job 7] argv[1]="7"
D [09/Apr/2021:14:42:06 -0800] [Job 7] argv[2]="anonymous"
D [09/Apr/2021:14:42:06 -0800] [Job 7] argv[3]="Test Page"
D [09/Apr/2021:14:42:06 -0800] [Job 7] argv[4]="1"
D [09/Apr/2021:14:42:06 -0800] [Job 7] argv[5]="job-uuid=urn:uuid:12f9a34a-6f39-365a-7e6b-dfb48f4bbda2 job-originating-host-name=localhost date-time-at-creation= date-time-at-processing= time-at-creation=1618008117 time-at-processing=1618008117"
D [09/Apr/2021:14:42:06 -0800] [Job 7] argv[6]="/var/spool/cups/d00007-001"
D [09/Apr/2021:14:42:06 -0800] [Job 7] envp[0]="CUPS_CACHEDIR=/var/cache/cups"
D [09/Apr/2021:14:42:06 -0800] [Job 7] envp[1]="CUPS_DATADIR=/usr/share/cups"
D [09/Apr/2021:14:42:06 -0800] [Job 7] envp[2]="CUPS_DOCROOT=/usr/share/cups/doc-root"
D [09/Apr/2021:14:42:06 -0800] [Job 7] envp[3]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [09/Apr/2021:14:42:06 -0800] [Job 7] envp[4]="CUPS_REQUESTROOT=/var/spool/cups"
D [09/Apr/2021:14:42:06 -0800] [Job 7] envp[5]="CUPS_SERVERBIN=/usr/lib/cups"
D [09/Apr/2021:14:42:06 -0800] [Job 7] envp[6]="CUPS_SERVERROOT=/etc/cups"
D [09/Apr/2021:14:42:06 -0800] [Job 7] envp[7]="CUPS_STATEDIR=/run/cups"
D [09/Apr/2021:14:42:06 -0800] [Job 7] envp[8]="HOME=/var/spool/cups/tmp"
D [09/Apr/2021:14:42:06 -0800] [Job 7] envp[9]="PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [09/Apr/2021:14:42:06 -0800] [Job 7] envp[10]="SERVER_ADMIN=root@24963"
D [09/Apr/2021:14:42:06 -0800] [Job 7] envp[11]="SOFTWARE=CUPS/2.2.10"
D [09/Apr/2021:14:42:06 -0800] [Job 7] envp[12]="TMPDIR=/var/spool/cups/tmp"
D [09/Apr/2021:14:42:06 -0800] [Job 7] envp[13]="USER=root"
D [09/Apr/2021:14:42:06 -0800] [Job 7] envp[14]="CUPS_MAX_MESSAGE=2047"
D [09/Apr/2021:14:42:06 -0800] [Job 7] envp[15]="CUPS_SERVER=/var/run/cups/cups.sock"
D [09/Apr/2021:14:42:06 -0800] [Job 7] envp[16]="CUPS_ENCRYPTION=IfRequested"
D [09/Apr/2021:14:42:06 -0800] [Job 7] envp[17]="IPP_PORT=631"
D [09/Apr/2021:14:42:06 -0800] [Job 7] envp[18]="CHARSET=utf-8"
D [09/Apr/2021:14:42:06 -0800] [Job 7] envp[19]="LANG=en.UTF-8"
D [09/Apr/2021:14:42:06 -0800] [Job 7] envp[20]="PPD=/etc/cups/ppd/Samsung_ML-2010.ppd"
D [09/Apr/2021:14:42:06 -0800] [Job 7] envp[21]="RIP_MAX_CACHE=128m"
D [09/Apr/2021:14:42:06 -0800] [Job 7] envp[22]="CONTENT_TYPE=application/vnd.cups-pdf-banner"
D [09/Apr/2021:14:42:06 -0800] [Job 7] envp[23]="DEVICE_URI=usb://Samsung/ML-2010?serial=3A61BKEYA23203T."
D [09/Apr/2021:14:42:06 -0800] [Job 7] envp[24]="PRINTER_INFO=Samsung ML-2010"
D [09/Apr/2021:14:42:06 -0800] [Job 7] envp[25]="PRINTER_LOCATION=Local Printer"
D [09/Apr/2021:14:42:06 -0800] [Job 7] envp[26]="PRINTER=Samsung_ML-2010"
D [09/Apr/2021:14:42:06 -0800] [Job 7] envp[27]="PRINTER_STATE_REASONS=none"
D [09/Apr/2021:14:42:06 -0800] [Job 7] envp[28]="CUPS_FILETYPE=document"
D [09/Apr/2021:14:42:06 -0800] [Job 7] envp[29]="FINAL_CONTENT_TYPE=application/vnd.cups-raster"
D [09/Apr/2021:14:42:06 -0800] [Job 7] envp[30]="AUTH_I****"
D [09/Apr/2021:14:42:06 -0800] [Job 7] OUTFORMAT=\"(null)\", so output format will be CUPS/PWG Raster
D [09/Apr/2021:14:42:06 -0800] [Job 7] pdftopdf: Last filter determined by the PPD: rastertospl; FINAL_CONTENT_TYPE: application/vnd.cups-raster => pdftopdf will not log pages in page_log.
D [09/Apr/2021:14:42:06 -0800] [Job 7] Loading USB quirks from \"/usr/share/cups/usb\".
D [09/Apr/2021:14:42:06 -0800] [Job 7] Loaded 172 quirks.
D [09/Apr/2021:14:42:06 -0800] [Job 7] Printing on printer with URI: usb://Samsung/ML-2010?serial=3A61BKEYA23203T.
D [09/Apr/2021:14:42:06 -0800] [Job 7] PID 1953 (/usr/lib/cups/filter/rastertospl) stopped with status 1.
D [09/Apr/2021:14:42:06 -0800] [Job 7] PDF template file doesn\'t have form. It\'s okay.
D [09/Apr/2021:14:42:06 -0800] [Job 7] libusb_get_device_list=11
D [09/Apr/2021:14:42:06 -0800] [Job 7] STATE: +connecting-to-device
D [09/Apr/2021:14:42:06 -0800] [Job 7] STATE: -connecting-to-device
D [09/Apr/2021:14:42:06 -0800] [Job 7] Printer found with device ID: MFG:Samsung;CMD:GDI;MDL:ML-2010;CLS:PRINTER;STATUS:BUSY; Device URI: usb://Samsung/ML-2010?serial=3A61BKEYA23203T.
D [09/Apr/2021:14:42:06 -0800] [Job 7] Device protocol: 2
D [09/Apr/2021:14:42:06 -0800] [Job 7] Sending data to printer.
D [09/Apr/2021:14:42:06 -0800] [Job 7] Sent 0 bytes...
D [09/Apr/2021:14:42:06 -0800] [Job 7] PID 1950 (/usr/lib/cups/filter/bannertopdf) exited with no errors.
D [09/Apr/2021:14:42:06 -0800] [Job 7] Color Manager: Calibration Mode/Off
D [09/Apr/2021:14:42:06 -0800] [Job 7] PID 1951 (/usr/lib/cups/filter/pdftopdf) exited with no errors.
D [09/Apr/2021:14:42:06 -0800] [Job 7] Calling FindDeviceById(cups-Samsung_ML-2010)
D [09/Apr/2021:14:42:06 -0800] [Job 7] Failed to send: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files
D [09/Apr/2021:14:42:06 -0800] [Job 7] Failed to get find device cups-Samsung_ML-2010
D [09/Apr/2021:14:42:06 -0800] [Job 7] Calling FindDeviceById(cups-Samsung_ML-2010)
D [09/Apr/2021:14:42:06 -0800] [Job 7] Failed to send: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files
D [09/Apr/2021:14:42:06 -0800] [Job 7] Failed to get device cups-Samsung_ML-2010
D [09/Apr/2021:14:42:06 -0800] [Job 7] Color Manager: no profiles specified in PPD
D [09/Apr/2021:14:42:06 -0800] [Job 7] Color Manager: ICC Profile: None
D [09/Apr/2021:14:42:06 -0800] [Job 7] Ghostscript using Any-Part-of-Pixel method to fill paths.
D [09/Apr/2021:14:42:06 -0800] [Job 7] Ghostscript command line: gs -dQUIET -dPARANOIDSAFER -dNOPAUSE -dBATCH -dNOINTERPOLATE -dNOMEDIAATTRS -dShowAcroForm -sstdout=%stderr -sOutputFile=%stdout -sDEVICE=cups -r600x600 -dDEVICEWIDTHPOINTS=612 -dDEVICEHEIGHTPOINTS=792 -dcupsBitsPerColor=8 -dcupsColorOrder=0 -dcupsColorSpace=0 -scupsPageSizeName=Letter -I/usr/share/cups/fonts -c \'<</.HWMargins[12.500000 12.500000 12.500000 12.500000] /Margins[0 0]>>setpagedevice\' -f -_
D [09/Apr/2021:14:42:06 -0800] [Job 7] envp[0]=\"CUPS_CACHEDIR=/var/cache/cups\"
D [09/Apr/2021:14:42:06 -0800] [Job 7] envp[1]=\"CUPS_DATADIR=/usr/share/cups\"
D [09/Apr/2021:14:42:06 -0800] [Job 7] envp[2]=\"CUPS_DOCROOT=/usr/share/cups/doc-root\"
D [09/Apr/2021:14:42:06 -0800] [Job 7] envp[3]=\"CUPS_FONTPATH=/usr/share/cups/fonts\"
D [09/Apr/2021:14:42:06 -0800] [Job 7] envp[4]=\"CUPS_REQUESTROOT=/var/spool/cups\"
D [09/Apr/2021:14:42:06 -0800] [Job 7] envp[5]=\"CUPS_SERVERBIN=/usr/lib/cups\"
D [09/Apr/2021:14:42:06 -0800] [Job 7] envp[6]=\"CUPS_SERVERROOT=/etc/cups\"
D [09/Apr/2021:14:42:06 -0800] [Job 7] envp[7]=\"CUPS_STATEDIR=/run/cups\"
D [09/Apr/2021:14:42:06 -0800] [Job 7] envp[8]=\"HOME=/var/spool/cups/tmp\"
D [09/Apr/2021:14:42:06 -0800] [Job 7] envp[9]=\"PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin\"
D [09/Apr/2021:14:42:06 -0800] [Job 7] envp[10]=\"SERVER_ADMIN=root@24963\"
D [09/Apr/2021:14:42:06 -0800] [Job 7] envp[11]=\"SOFTWARE=CUPS/2.2.10\"
D [09/Apr/2021:14:42:06 -0800] [Job 7] envp[12]=\"TMPDIR=/var/spool/cups/tmp\"
D [09/Apr/2021:14:42:06 -0800] [Job 7] envp[13]=\"USER=root\"
D [09/Apr/2021:14:42:06 -0800] [Job 7] envp[14]=\"CUPS_MAX_MESSAGE=2047\"
D [09/Apr/2021:14:42:06 -0800] [Job 7] envp[15]=\"CUPS_SERVER=/var/run/cups/cups.sock\"
D [09/Apr/2021:14:42:06 -0800] [Job 7] envp[16]=\"CUPS_ENCRYPTION=IfRequested\"
D [09/Apr/2021:14:42:06 -0800] [Job 7] envp[17]=\"IPP_PORT=631\"
D [09/Apr/2021:14:42:06 -0800] [Job 7] envp[18]=\"CHARSET=utf-8\"
D [09/Apr/2021:14:42:06 -0800] [Job 7] envp[19]=\"LANG=en.UTF-8\"
D [09/Apr/2021:14:42:06 -0800] [Job 7] envp[20]=\"PPD=/etc/cups/ppd/Samsung_ML-2010.ppd\"
D [09/Apr/2021:14:42:06 -0800] [Job 7] envp[21]=\"RIP_MAX_CACHE=128m\"
D [09/Apr/2021:14:42:06 -0800] [Job 7] envp[22]=\"CONTENT_TYPE=application/vnd.cups-pdf-banner\"
D [09/Apr/2021:14:42:06 -0800] [Job 7] envp[23]=\"DEVICE_URI=usb://Samsung/ML-2010?serial=3A61BKEYA23203T.\"
D [09/Apr/2021:14:42:06 -0800] [Job 7] envp[24]=\"PRINTER_INFO=Samsung ML-2010\"
D [09/Apr/2021:14:42:06 -0800] [Job 7] envp[25]=\"PRINTER_LOCATION=Local Printer\"
D [09/Apr/2021:14:42:06 -0800] [Job 7] envp[26]=\"PRINTER=Samsung_ML-2010\"
D [09/Apr/2021:14:42:06 -0800] [Job 7] envp[27]=\"PRINTER_STATE_REASONS=none\"
D [09/Apr/2021:14:42:06 -0800] [Job 7] envp[28]=\"CUPS_FILETYPE=document\"
D [09/Apr/2021:14:42:06 -0800] [Job 7] envp[29]=\"FINAL_CONTENT_TYPE=application/vnd.cups-raster\"
D [09/Apr/2021:14:42:06 -0800] [Job 7] envp[30]=\"AUTH_INFO_REQUIRED=none\"
D [09/Apr/2021:14:42:06 -0800] [Job 7] Start rendering...
D [09/Apr/2021:14:42:06 -0800] [Job 7] Processing page 1...
D [09/Apr/2021:14:42:06 -0800] [Job 7] Error: /ioerror in --showpage--
D [09/Apr/2021:14:42:06 -0800] [Job 7] Operand stack:
D [09/Apr/2021:14:42:06 -0800] [Job 7] true   (/var/spool/cups/tmp/gs_MpphT3)   --nostringval--   1   true
D [09/Apr/2021:14:42:06 -0800] [Job 7] Execution stack:
D [09/Apr/2021:14:42:06 -0800] [Job 7] %interp_exit   .runexec2   --nostringval--   showpage   --nostringval--   2   %stopped_push   --nostringval--   showpage   showpage   false   1   %stopped_push   1992   2   3   %oparray_pop   1991   2   3   %oparray_pop   1979   2   3   %oparray_pop   showpage   1980   4   3   %oparray_pop   showpage   showpage   2   1   1   showpage   %for_pos_int_continue   1983   4   7   %oparray_pop   showpage   showpage   1840   3   9   %oparray_pop   showpage   showpage
D [09/Apr/2021:14:42:06 -0800] [Job 7] Dictionary stack:
D [09/Apr/2021:14:42:06 -0800] [Job 7] --dict:732/1123(ro)(G)--   --dict:1/20(G)--   --dict:80/200(L)--   --dict:80/200(L)--   --dict:133/256(ro)(G)--   --dict:315/325(ro)(G)--   --dict:33/64(L)--   --dict:6/9(L)--   --dict:7/20(L)--
D [09/Apr/2021:14:42:06 -0800] [Job 7] Current allocation mode is local
D [09/Apr/2021:14:42:06 -0800] [Job 7] Last OS error: Broken pipe
D [09/Apr/2021:14:42:06 -0800] [Job 7] GPL Ghostscript 9.27: Unrecoverable error, exit code 1
D [09/Apr/2021:14:42:06 -0800] [Job 7] Rendering completed
D [09/Apr/2021:14:42:06 -0800] [Job 7] PID 1952 (/usr/lib/cups/filter/gstoraster) stopped with status 1.
D [09/Apr/2021:14:42:06 -0800] [Job 7] Waiting for read thread to exit...
D [09/Apr/2021:14:42:06 -0800] [Job 7] Read thread still active, aborting the pending read...
D [09/Apr/2021:14:42:06 -0800] [Job 7] Resetting printer.
D [09/Apr/2021:14:42:06 -0800] [Job 7] PID 1954 (/usr/lib/cups/backend/usb) exited with no errors.
D [09/Apr/2021:14:42:06 -0800] [Job 7] End of messages
D [09/Apr/2021:14:42:06 -0800] [Job 7] printer-state=3(idle)
D [09/Apr/2021:14:42:06 -0800] [Job 7] printer-state-message="Rendering completed"
D [09/Apr/2021:14:42:06 -0800] [Job 7] printer-state-reasons=none
I [09/Apr/2021:14:42:09 -0800] [Client 116] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=1989, file=13)
I [09/Apr/2021:14:42:15 -0800] Saving printers.conf...
I [09/Apr/2021:14:42:15 -0800] Generating printcap /run/cups/printcap...
I [09/Apr/2021:14:42:15 -0800] Saving job.cache...
I [09/Apr/2021:14:42:15 -0800] [Client 118] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=2010, file=13)
I [09/Apr/2021:14:42:15 -0800] Expiring subscriptions...
User avatar
Flash
Moderator
Posts: 978
Joined: Tue Dec 03, 2019 3:13 pm
Location: Arizona, U.S.
Has thanked: 52 times
Been thanked: 127 times

Re: HP Printer Problems in Dunfell; ok in Easy Buster & old Tahr

Post by Flash »

Using Easypup 2.5.1 booted from a DVD, I've had no problems using an HP OfficeJet 5255 and HP Photosmart C6380 with CUPS. The drivers are already in Easy.

Chaos coordinator :?
Post Reply

Return to “EasyOS”