Puppy Linux Discussion Forum

UPDATE NOTE: I am now finding meetings requiring a later version than 5.1.4, so I made a 5.4.6 version. Tested OK in Fossapup64-9.5 & can be used in ScPup64-20.06 with extras. Post for this version is 2 posts down.

For completeness (some older machines need this), old 5.1.4 version is here:

Fossapup64 (& bionicpup64): https://www.mediafire.com/file/6moohwwq ... 4.pet/file

ScPup64 (20.06 tested OK): Can use fossapup64 version, but needs xlibs and one of the apulse/alsa options (see 2 posts down).

This version works for me! Thanks a lot!! I have been looking for a solution for months...
I'm running BionicPup64.

This older (Dec 2020) Zoom .pet works for me in standard Fossapup64-9.5 & ScPup64_20.06 with extras as detailed below.
My previous v5.1.4 (see earlier posts) is no longer accepted in some meetings.

Version 5.4.6 here (use at own risk): https://archive.org/download/Puppy_Linu ... ossa64.pet
I apologise if any ads shown at Mediafire links are inappropriate. Install by clicking on .pet in ROXFiler.

NOTES FOR ScPup64 (20.06 tested OK):
I got it working, but requires some xlibs. I have attached a .pet below for those. Apulse is an issue too.

THERE ARE TWO OPTIONS for apulse - zoom will crash in ScPup64 unless ONE of these is done:
Option 1:
Requires substituting with fossapup64's apulse. I have a .pet for that, but is not easily reversible & not perfect, so will send on request only.
Option 2:
Simply remove all apulse & libpulse files (in /usr/bin & /usr/lib64), but then need a web browser that can run without apulse (i.e. chrome - see forum browser section).