EasyOS Dunfell 2.6.1 released for Raspberry Pi4

[BarryK]

menu->Multimedia->Aumix Audio Mixer

Click on and nothing happens.

Tried to run in terminal.
Get this error:
# aumix
aumix: error opening mixer: No such file or directory

Yes, it doesn't work. Have removed it, and the fallback mixer is alsamixer.

[BarryK]

Pburn is very old version 3.7.18

The latest one is 4.3.19
http://www.01micko.com/zigbert/pburn-4.3.19.pet

Yes, 3.7.18 is the last one that works with 'cdrkit'. 4.x versions require 'cdrtools'.

cdrkit is the package supported by debian and ubuntu.

[BarryK]

Tried using the EasyUpdate
Got this error:
Sorry, cannot find file mbr.bin. Looked in /usr/lib/syslinux,
/usr/lib/syslinux/mbr, /usr/lib/SYSLINUX and /usr/share/syslinux. You have an
abnormal installation of Syslinux. Aborting

Thanks for reporting. Fixed.

[BarryK]

I am just about to release EasyOS version 2.8 for the pi4.

Here is a fix for the "update" icon on the desktop, see attached. It has a false ".gz", remove that, place the the file "easy-update" in /usr/local/easy_version, and right-click on it, choose "Properties" and tick the "Exec" checkboxes.

I haven't actually tried it, just done fixes that theoretically should have fixed it.

I will let you know when 2.8 is uploaded.

[bigpup]

Tried the Easy-update fixed version.

It now runs, but I do not think it worked correctly.

I did not provide the old EasyOS Dunfell 2.6.1,img

Here is the terminal output.

Welcome. this script will download the latest release of EasyOS and
automatically update the current installation.
It uses the rsync utility to download only the differences between the current
version and the latest online easy-*.img.gz file, which is much smaller and
faster than downloading the entire file.
The script will place the new vmlinuz, initrd, easy.sfs and device-tree files
into the boot-partition and auomatically fix initrd, then all you will need to
do is reboot and you have updated.
If you have an Internet connection and want to test if there is a new release
and download it, continue with the script...

Press ENTER to continue (any other character then ENTER to quit):

Probing ibiblio.org to see if there is a later release...
--2021-06-05 03:47:21-- http://distro.ibiblio.org/easyos/aarch6 ... es/dunfell
Resolving distro.ibiblio.org... 152.19.134.43
Connecting to distro.ibiblio.org|152.19.134.43|:80... connected.
HTTP request sent, awaiting response... 301 Moved Permanently
Location: http://distro.ibiblio.org/easyos/aarch6 ... s/dunfell/ [following]
--2021-06-05 03:47:21-- http://distro.ibiblio.org/easyos/aarch6 ... s/dunfell/
Reusing existing connection to distro.ibiblio.org:80.
HTTP request sent, awaiting response... 200 OK
Length: 6254 (6.1K) [text/html]
Saving to: ‘/tmp/easy_version/dunfell’

dunfell 100%[===================>] 6.11K --.-KB/s in 0.003s

2021-06-05 03:47:21 (1.94 MB/s) - ‘/tmp/easy_version/dunfell’ saved [6254/6254]

The latest online version is: rpi4
The current installed version is: 2.6.1
Newer online version, so can update...

Good. Required free space in /mnt/wkg is 2GB, you have: 95728MB

The rsync utility will compare the easy*.img.gz of the current version with
that of the new version, and only download the differences. This will be much
less than downloading the entire new .img.gz file.
You do not need the easy*.img.gz current version, as this script will
reconstruct it.

However, if you do have this file somewhere:
easy-2.6.1-aarch64.img.gz
Then it will not have to be reconstructed.
If you do have it, copy it to here, immediately: /mnt/mmcblk0p2/easyos/
Do it now, then press the ENTER key.
If you have not got it, just press the ENTER key and it will be reconstructed.
When ready, press ENTER key:

Reconstructing easy-2.6.1-aarch64.img.gz ...
Creating a 1281MB blank image file...
1339031552 bytes (1.3 GB, 1.2 GiB) copied, 73 s, 18.3 MB/s
1281+0 records in
1281+0 records out
1343225856 bytes (1.3 GB, 1.3 GiB) copied, 73.2713 s, 18.3 MB/s
Creating a new dos partition table, using fdisk...

Welcome to fdisk (util-linux 2.35.1).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.

Device does not contain a recognized partition table.
Created a new DOS disklabel with disk identifier 0xf2390c20.

Command (m for help): Created a new DOS disklabel with disk identifier 0x7b3bc6a0.

Command (m for help): The partition table has been altered.
Syncing disks.

Creating 639MB fat32 esp partition...

Welcome to fdisk (util-linux 2.35.1).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.

Command (m for help): Partition type
p primary (0 primary, 0 extended, 4 free)
e extended (container for logical partitions)
Select (default p): Partition number (1-4, default 1): First sector (2048-2623487, default 2048): Last sector, +/-sectors or +/-size{K,M,G,T,P} (2048-2623487, default 2623487):
Created a new partition 1 of type 'Linux' and of size 639 MiB.

Command (m for help): The partition table has been altered.
Syncing disks.

Welcome to fdisk (util-linux 2.35.1).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.

Command (m for help): Selected partition 1
Hex code (type L to list all codes): Changed type of partition 'Linux' to 'EFI (FAT-12/16/32)'.

Command (m for help): The partition table has been altered.
Syncing disks.

Welcome to fdisk (util-linux 2.35.1).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.

Command (m for help): Selected partition 1
The bootable flag on partition 1 is enabled now.

Command (m for help): The partition table has been altered.
Syncing disks.

Creating fat32 filesystem...
mkfs.fat 4.1 (2017-01-24)
mkfs.fat: warning - lowercase labels might not work properly with DOS or Windows

Populating fat32 esp partition...
cp: cannot stat '/mnt/wkg/releases/easy-2.6.1/vmlinuz': No such file or directory
Creating 640MB ext4 partition...

Welcome to fdisk (util-linux 2.35.1).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.

Command (m for help): Partition type
p primary (1 primary, 0 extended, 3 free)
e extended (container for logical partitions)
Select (default p): Partition number (2-4, default 2): First sector (1310720-2623487, default 1310720): Last sector, +/-sectors or +/-size{K,M,G,T,P} (1310720-2623487, default 2623487):
Created a new partition 2 of type 'Linux' and of size 640 MiB.

Command (m for help): The partition table has been altered.
Syncing disks.

Creating ext4 f.s. with journal, encrypt...
mke2fs 1.45.4 (23-Sep-2019)
64-bit filesystem support is not enabled. The larger fields afforded by this feature enable full-strength checksumming. Pass -O 64bit to rectify.
Discarding device blocks: done
Creating filesystem with 163840 4k blocks and 41040 inodes
Filesystem UUID: 2c746a79-f83e-4336-89e8-a918828a450a
Superblock backups stored on blocks:
32768, 98304

Allocating group tables: done
Writing inode tables: done
Creating journal (4096 blocks): done
Writing superblocks and filesystem accounting information: done

Compressing easy-2.6.1-aarch64.img ...

Downloading easy-rpi4-aarch64.img.gz ...

receiving incremental file list
rsync: change_dir "/amd64/releases/dunfell/rpi4" (in easyos) failed: No such file or directory (2)

sent 8 bytes received 120 bytes 85.33 bytes/sec
total size is 0 speedup is 0.00
rsync error: some files/attrs were not transferred (see previous errors) (code 23) at ../rsync-3.1.3/main.c(1659) [Receiver=3.1.3]
Something went wrong with the download. Aborting
Script terminated, close the window

[BarryK]

Thanks for reporting. I see the problem:

rsync: change_dir "/amd64/releases/dunfell/rpi4" (in easyos) failed: No such file or directory (2)

The path should be "aarch64", not "amd64". Will fix that, and this time will test it.

[BarryK]

duplicate post.