Puppy Linux Discussion Forum

SLC 64

is a 64 bit slackware current basing woof-ce build

kernel 5.7.2 ( by peebee - many thanks )
X.Org 1.20.9
JWM 2.3.6

slc_64-2020-12.iso ( 383 mb, md5 - 3ca762d8a7ec1ff49e41d6a6bf24d32c )

Tested: Used SG2D to boot the ISO file directly. Boots to desktop and ran FirstRUN.Cosmetic changes and saved session to /Sessions folder as a folder on the ext4 partition at Shutdown to reboot. Rebooted without issues as it found the saved session.

Problems

1. Immediately before the Desktop emerges is an error message on console. Too fast to catch.

2. On desktop, Attempted to use Print-Scrn key to capture a desktop but, end in error. Also in ROX, left-clicking an image file, eg something.jpg does nothing.

   

   Print-screen key error.jpg (31.32 KiB) Viewed 7567 times

3. SAMBA not working; gather message when you issue following terminal commands

   Code: Select all

   smbclient -U% -L NAS
   samba -V

4. mount command for LAN resources do not work

   Code: Select all

   mount //192.168.0.2/Pup-Dog_ISOS /mnt/Test/BOOTISOS

Continuing to test

try to mount this way

mount -t cifs //192.168.0.2/Pup-Dog_ISOS /mnt/Test/BOOTISOS -o user=Clarity,vers=1.0

please post your boot.log

TAS 1.15 -> push the button View log

G'day norgo,

Thanks for this Pup.

Installed easily and connected to my printer, scanner and internet. My all-apps-via-links sfs loads and runs as usual.

I'm having a strange problem with portable 64-browsers (Brave, Iron, Vivaldi) that work on other 64-bit Pups on my computer.

The browser opens and display its home-page as per my profile for that browser. But if I then click on a 'secure' site from the 'Bookmarks' bar, I see a message 'Establishing a secure connection.." but nothing then happens.
When I click on a site that the browser says (incorrectly) 'this is not a secure site' (when I know it is, as I define 'secure' ), the non-secure site will load and run as normal.
Running the portables in a terminal gave no clue to me as to what is happening when these browsers hang 'Establishing.....'. I could try this again if it would help you (or Mike Walsh?) fix my problem.

Posting this from your in-built Germanic Seamonkey which has no problem with these "secure" sites.

Thanks again.

David S.

Postscript: I took norgo's advice (see next post) and installed his updated sqlite - portable browsers Iron, Brave and Vivaldi all now open 'secure' and old sites with rapid connection.
Thanks norgo.

@davids45
thank you for feedback
the reason for your browser problem is the installed sqlite version.
I compiled the latest version sqlite-3.34-1. to solve this problem
Please launch the package manager and update the package database.
Now you can install the new sqlite version from [ puppy-slc64-norgo ] repository and your browser should run

Hi @norgo

Thanks for your response.

TAS 1.15 -> push the button View log
ffmpeg version 4.3 Copyright (c) 2000-2020 the FFmpeg developers
  built with gcc 9.3.0 (GCC)
  configuration: --prefix=/usr --libdir=/usr/lib64 --disable-debug --disable-ffplay --disable-sdl2 --enable-shared --disable-static --enable-bzlib --enable-libfdk-aac --enable-libfreetype --enable-gpl --enable-libass --enable-libbluray --enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopus --enable-libspeex --enable-libtheora --enable-libvorbis --enable-libxvid --enable-libvpx --enable-libx264 --enable-libx265 --enable-libzimg --enable-nonfree --enable-pthreads --enable-postproc --enable-runtime-cpudetect --enable-swscale --enable-version3 --enable-vaapi --enable-vdpau --enable-zlib --enable-openssl
  libavutil      56. 51.100 / 56. 51.100
  libavcodec     58. 91.100 / 58. 91.100
  libavformat    58. 45.100 / 58. 45.100
  libavdevice    58. 10.100 / 58. 10.100
  libavfilter     7. 85.100 /  7. 85.100
  libswscale      5.  7.100 /  5.  7.100
  libswresample   3.  7.100 /  3.  7.100
  libpostproc    55.  7.100 / 55.  7.100
[xcbgrab indev @ 0xa7bc40] Unable to parse option value "x" as image size
[xcbgrab indev @ 0xa7bc40] Error setting option video_size to value x.
:0: Invalid argument

I need those samba services. If you rebuild, would you insure they are there. All official WoofCE have this for many years.

BTW: when you boot pristine, are you saying

1. Print-Scrn works to capture window/screen?

2. and the mount command works?

3. and SAMBA is present?

3 things I am having concerns.

Thanks

@Clarity
I would say there is something wrong with your installation.

check the md5 checksum of the ISO
or did you install some applications additional ?
As already mentioned, it's impossible to help without information.
I don't like to guess

1. Take a shot is working flawless in my case
2. Left-click on a jpg file in ROX opens this file with viewnior
3. smbclient

# smbclient -U norgo -L 192.168.1.1
Enter norgo's password: 

Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.0.37]

	Sharename       Type      Comment
	---------       ----      -------
	IPC$            IPC       IPC Service (ZyXEL_Gateway)
	Drive1_1        Disk      shared folders on each volume
Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.0.37]

	Server               Comment
	---------            -------

	Workgroup            Master
	---------            -------

4. mount

# mount -t cifs //192.168.1.1/Drive1_1 /mnt/TEST -o user=norgo,vers=1.0
Password for norgo@//192.168.1.1/Drive1_1: 

# ls -l /mnt/TEST
total 1024
-rwxrwxrwx 1 root root 144198 Jan 31  2021 Screenshot.jpg

Wow & THANKS!

I haven't had an MD5 download error in a decade; "Spoiled!". As a result, I never suspected it as a culprit.

"All is well."

I wil continue testing system's use.

Anyone getting Chrome installed and running without having crash dumps and no navigation?

Clarity wrote: ↑Sun Jan 31, 2021 7:40 am

Anyone getting Chrome installed and running without having crash dumps and no navigation?

oh yes I did
1. launch package manager and update package database
2. install sqlite and chrome from [ puppy-slc64-norgo ] repository

that's all

Already have these installed

I'll uninstall, update repo, and install again.

Clarity wrote: ↑Mon Feb 01, 2021 6:03 am

Already have these installed

Screenshot.jpg (62.68 KiB) Viewed 6210 times

Screenshot(1).jpg (74.05 KiB) Viewed 6210 times

Should I uninstall, update repo, and install again?

Uninstalled Chrome and attempted to re-install it. Got this error...not seen when it was installed before...but gotten now

@Clarity
I've no idea what package of chrome you've installed.
The chrome version of my repo has the package name chrome-88.0.4324.96-x86_64 and the simple description "Web Browser"
Your installed version google-chrome-88.0.4324.96-x86_64 and the description "Google-Chrome is a web browser based on bla bla"
Furthermore I can't detect the installed sqlite version 3.34.1 on your system.

Found the problem; "sqlite". My OLD eyes missed what PPM shared. It showed me the discrepancy with what PPM had and what the system had.

Old eyes, late at night, sun-spots (HA!)...in any event, I missed the screen's accuracy. After upgrade, all is well.

Thanks again!!!

Chapeau!

Downloaded and 'installed' frugal, booted straight to desktop with plang=de_DE.UTF-8

ATM some common problems with Slacko in general when it comes to internationalization see this post and this (exept the first error doesn't occur on SLC64), but nothing that couldn't be fixed.

viewnior crashes when showing properties of an image. I have read about it in the forum, but don't recall where.

More about internationalization upcoming in german forum....

My first impression is so WOW
I like it very much.

Thanks for your hard work (i bet it still is)

HerrBert wrote: ↑Tue Feb 02, 2021 7:28 pm

viewnior crashes when showing properties of an image. I have read about it in the forum, but don't recall where.
More about internationalization upcoming in german forum....

My first impression is so WOW
I like it very much.

Thanks for your hard work (i bet it still is)

Thank you very much for this positive feedback and for your good work (internationalization) of course too.
I compiled viewnior from source just right now.
Up to now I wasn't able to reproduce the application crash.

package installable via ppm

package installable via ppm

Works after updating PPM database.
Thank you very much.

Anyone had success in installing Opera via the utility in Menu>Setup>Download Chrome or Opera?

Chrome PET installs OK, but requires the changes @norgo mentioned earlier.

But Opera, fails on PET setup after download for subsystem installation.

@Clarity
install the package gsettings-desktop-schemas and Opera will run

Hi norgo

You have made another nice build. Thank you!
I have always enjoyed your 32bit Slacko's.
And I have not run into any problem yet with this 64bit. It works fast and reliable.

I would like to compile some little things.
Do you have a devx somewhere? Thanks.

@foxpup
thank you for feedback, nice to hear.
devx uploaded as promised

Applications added ( Inkscape, Gimp, Cinelerra-GG, TsMuxer ) see main post

Application added ( Merkaartor 0.18.4-48 ) installable via PPM

Application update ( Inkscape 1.0.1 ) see main post

What about the light dimming for screen? It has xbacklight or acpilight? Or dimming works via F5-F6 keys on thinkpad?
Is there a 32 bit version or not?

@Dingo
xbacklight is installed but not tested extensively because lack of laptops
It worked on my neighbours Asus laptop with nvidia graphics.
Up to now there is only the 64bit version.

norgo wrote: ↑Tue Apr 20, 2021 10:08 pm

@Dingo
xbacklight is installed but not tested extensively because lack of laptops
It worked on my neighbours Asus laptop with nvidia graphics.
Up to now there is only the 64bit version.

don't work

# xbacklight -set 6
No outputs have backlight property

acpilight neither

# acpilight
env: can't execute 'python': No such file or directory

Hi @norgo

Question

• Does the "SLC64 REPO" do dependency checking for its packages?

No problems, just curious.

Dingo wrote: ↑Wed Apr 21, 2021 9:48 pm

Code: Select all

# xbacklight -set 6
No outputs have backlight property

acpilight neither

difficult for me to reproduce without laptop
xbacklight version from iso

check /sys/class/backlight if there is an intel_backlight folder
create a config file /etc/X11/xorg.conf.d/30-intel.conf with following content and restart X-Server

Section "Device"
        Identifier  "Intel Graphics" 
        Driver      "intel"
        Option      "Backlight"  "intel_backlight"
EndSection