Moderator: fredx181
Hi,
I want to use boot splash.
plymouth has dependency conflict with elogind. plymouth works with systemd.
Alternates found sugesting to use plymouth-nosystemd
Could not locate the deb package.
Any other alternative for splash screen?
Thanks.
Alex.
alexmartin wrote:This is working for puppy. Not for newuser created. X server not starting. Remains in console mode.
You need to change /etc/skel.
Strange, works for me, I ran "Add new user" from menu, created user "fred' > Exit X > typed login > logged in as fred and X started.
Also modified /etc/inittab to autologin as "fred' and after reboot it worked ok.
Maybe you did different, also it may depend on the setup, e.g. Desktop choice, what's yours ? And any error message you see ?
EDIT: Re: Splash screen: I have no idea, and don't know anything about plymouth, sorry.
Fred
Hi,
Using StretchDog that I used to make BusterDog isos yesterday.
I just tried to use mklive-bullseye (from page 1, dated 2021-05-23 ).
Tried to make bullseye Tint2 (last one on gui selection page). Script ran for a while, input passwords for root and puppy users, configuring keyboard, and then failed. Tried 2 twice.
I think I used mklive-bullseye64 yesterday to make some iso (with gzip) successfully, but thought to re-make them with XZ compression this time. But forgot where I put mklive-bullseye64.
Maybe some repo link is down temporarily. I will try again later.
Code: Select all
...(too long to attach all)
E: Unable to locate package txt2svg
E: Unable to locate package weav
E: Unable to locate package wex
E: Unable to locate package yad-splash
E: Unable to locate package youtube-get3
E: Unable to locate package straw-viewer
E: Unable to locate package sound-card-selector
E: Unable to locate package pack-it
E: Unable to locate package trans-tray
E: Unable to locate package camphonetab
E: Unable to locate package takeagif
E: Unable to locate package qiv-slideshow
E: Unable to locate package repo-conf
E: Unable to locate package upgrade-kernel
Sorry, there are one or more errors, see above.
Could be a typo in a package name.
Exiting . . .
Unmounting mount binds in chroot
root@live:~/Downloads#
Meanwhile, I'll try other selection....see if it gives same error...
Edit - just tried minimal iso (first one on GUI). Same error...(full screen output attached).
Code: Select all
root@live:~/Downloads# chmod +x mklive-bullseye
root@live:~/Downloads# ./mklive-bullseye -gui
Checking network connection...
OK
--2021-06-02 08:44:50-- https://debiandog.github.io/MakeLive/configs-bullseye/openbox_lx.conf
Resolving debiandog.github.io (debiandog.github.io)... 185.199.110.153, 185.199.109.153, 185.199.108.153, ...
Connecting to debiandog.github.io (debiandog.github.io)|185.199.110.153|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 2738 (2.7K) [text/plain]
Saving to: ‘/tmp/openbox_lx.conf’
/tmp/openbox_lx.con 100%[===================>] 2.67K --.-KB/s in 0s
2021-06-02 08:44:50 (7.88 MB/s) - ‘/tmp/openbox_lx.conf’ saved [2738/2738]
OK, running 64-bit OS, building live system for 64-bit: x86_64
Create a Debian Bullseye minimal live system similar to 'DebianDog'
With overlay support and porteus-boot style included
It's required to have at least 3 GB free space
and to run this script on a Linux filesystem, e.g. ext4
Building will be done in: /root/Downloads/bullseye
Running with configuration: /tmp/openbox_lx.conf
Build setup info can be found in: /root/Downloads/bullseye/build_setup.txt
If you'd like a log from the output, run again e.g:
./mklive-bullseye -gui 2>&1 | tee mklive-bullseye.log
First setting up debootstrap, this will take a few minutes
After that you will be asked to set the password for 'root'
At the end of the install process you may want to run one or more commands
(in the chroot)
If so, Xterm will run and you can type e.g. synaptic, to install more packages
Or e.g. rox or thunar (filemanager), if installed)
Do you want to run Xterm just before exiting chroot ? (Enter=no) (y/N)?
OK, will not run xterm at the end of install process
Checking network connection...
OK
At the end of the install process the initrd file(s) will be created
The initrd1.xz for porteus-boot will be created anyway, but an initrd for 'live-boot' can be created also (initrd.img)
Do you want to create initrd.img (for live-boot) ? (Enter=no) (y/N)?
OK, will not create initrd.img, only initrd1.xz
At the end an ISO will be created
Type Y or y (or ENTER) if you want an ISO with UEFI support
(ISO size will be larger)
If not, type n
Do you want to create ISO with UEFI support ? (Enter=yes) (Y/n)?
OK, will create ISO with UEFI support
Update the package lists...
Hit:1 http://security.debian.org/debian-security stretch/updates InRelease
Ign:2 http://deb.debian.org/debian stretch InRelease
Hit:3 http://deb.debian.org/debian stretch Release
Hit:4 http://dl.google.com/linux/chrome/deb stable InRelease
Hit:5 https://ixpeering.dl.sourceforge.net/project/ubuntuzilla/mozilla/apt all InRelease
Get:7 https://fredx181.github.io/StretchDog/amd64/Packages ./ InRelease [2,302 B]
Ign:8 http://snapshot.debian.org/archive/debian/20200528 stretch InRelease
Hit:9 http://snapshot.debian.org/archive/debian/20200528 stretch Release
Fetched 2,302 B in 6s (329 B/s)
Reading package lists... Done
Install some required packages, e.g. xz-utils, wget, squashfs-tools, etc...
Reading package lists... Done
Building dependency tree
Reading state information... Done
wget is already the newest version (1.17.1).
cpio is already the newest version (2.11+dfsg-6).
xorriso is already the newest version (1.4.6-1+b1).
squashfs-tools is already the newest version (1:4.3-3+deb9u1).
isolinux is already the newest version (3:6.03+dfsg-14.1+deb9u1).
xz-utils is already the newest version (5.2.2-1.2+b1).
0 upgraded, 0 newly installed, 0 to remove and 204 not upgraded.
OK
--2021-06-02 08:45:36-- http://ftp.de.debian.org/debian/pool/main/d/debootstrap/debootstrap_1.0.89_all.deb
Resolving ftp.de.debian.org (ftp.de.debian.org)... 141.76.2.4
Connecting to ftp.de.debian.org (ftp.de.debian.org)|141.76.2.4|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 66500 (65K) [application/x-debian-package]
Saving to: ‘debootstrap_1.0.89_all.deb’
debootstrap_1.0.89_ 100%[===================>] 64.94K 103KB/s in 0.6s
2021-06-02 08:45:37 (103 KB/s) - ‘debootstrap_1.0.89_all.deb’ saved [66500/66500]
(Reading database ... 54655 files and directories currently installed.)
Preparing to unpack debootstrap_1.0.89_all.deb ...
Unpacking debootstrap (1.0.89) over (1.0.89) ...
Setting up debootstrap (1.0.89) ...
Setting up debootstrap in bullseye/chroot
This may take a while...
I: Retrieving InRelease
I: Checking Release signature
I: Valid Release signature (key id 16E90B3FDF65EDE3AA7F323C04EE7237B7D453EC)
I: Retrieving Packages
I: Validating Packages
I: Found packages in base already in required: apt
I: Resolving dependencies of required packages...
I: Resolving dependencies of base packages...
I: Found additional required dependencies: adduser debian-archive-keyring gpgv libacl1 libapt-pkg6.0 libattr1 libaudit-common libaudit1 libblkid1 libbz2-1.0 libc6 libcap-ng0 libcom-err2 libcrypt1 libdb5.3 libdebconfclient0 libext2fs2 libffi7 libgcc-s1 libgcrypt20 libgmp10 libgnutls30 libgpg-error0 libgssapi-krb5-2 libhogweed6 libidn2-0 libk5crypto3 libkeyutils1 libkrb5-3 libkrb5support0 liblz4-1 liblzma5 libmount1 libnettle8 libnsl2 libp11-kit0 libpam0g libpcre2-8-0 libpcre3 libseccomp2 libselinux1 libsemanage-common libsemanage1 libsepol1 libsmartcols1 libss2 libssl1.1 libstdc++6 libsystemd0 libtasn1-6 libtinfo6 libtirpc-common libtirpc3 libudev1 libunistring2 libuuid1 libxxhash0 libzstd1 logsave lsb-base zlib1g
I: Found additional base dependencies: openssl
I: Checking component main on http://deb.debian.org/debian...
I: Retrieving libacl1 2.2.53-10
I: Validating libacl1 2.2.53-10
I: Retrieving adduser 3.118
I: Validating adduser 3.118
I: Retrieving apt 2.2.3
I: Validating apt 2.2.3
I: Retrieving apt-transport-https 2.2.3
I: Validating apt-transport-https 2.2.3
I: Retrieving libapt-pkg6.0 2.2.3
I: Validating libapt-pkg6.0 2.2.3
I: Retrieving libattr1 1:2.4.48-6
I: Validating libattr1 1:2.4.48-6
I: Retrieving libaudit-common 1:3.0-2
I: Validating libaudit-common 1:3.0-2
I: Retrieving libaudit1 1:3.0-2
I: Validating libaudit1 1:3.0-2
I: Retrieving base-files 11.1
I: Validating base-files 11.1
I: Retrieving base-passwd 3.5.49
I: Validating base-passwd 3.5.49
I: Retrieving bash 5.1-2+b1
I: Validating bash 5.1-2+b1
I: Retrieving libbz2-1.0 1.0.8-4
I: Validating libbz2-1.0 1.0.8-4
I: Retrieving ca-certificates 20210119
I: Validating ca-certificates 20210119
I: Retrieving libdebconfclient0 0.259
I: Validating libdebconfclient0 0.259
I: Retrieving coreutils 8.32-4+b1
I: Validating coreutils 8.32-4+b1
I: Retrieving dash 0.5.11+git20200708+dd9ef66-5
I: Validating dash 0.5.11+git20200708+dd9ef66-5
I: Retrieving libdb5.3 5.3.28+dfsg1-0.8
I: Validating libdb5.3 5.3.28+dfsg1-0.8
I: Retrieving debconf 1.5.75
I: Validating debconf 1.5.75
I: Retrieving debian-archive-keyring 2021.1.1
I: Validating debian-archive-keyring 2021.1.1
I: Retrieving debianutils 4.11.2
I: Validating debianutils 4.11.2
I: Retrieving diffutils 1:3.7-5
I: Validating diffutils 1:3.7-5
I: Retrieving dpkg 1.20.9
I: Validating dpkg 1.20.9
I: Retrieving e2fsprogs 1.46.2-1
I: Validating e2fsprogs 1.46.2-1
I: Retrieving libcom-err2 1.46.2-1
I: Validating libcom-err2 1.46.2-1
I: Retrieving libext2fs2 1.46.2-1
I: Validating libext2fs2 1.46.2-1
I: Retrieving libss2 1.46.2-1
I: Validating libss2 1.46.2-1
I: Retrieving logsave 1.46.2-1
I: Validating logsave 1.46.2-1
I: Retrieving findutils 4.8.0-1
I: Validating findutils 4.8.0-1
I: Retrieving gcc-10-base 10.2.1-6
I: Validating gcc-10-base 10.2.1-6
I: Retrieving libgcc-s1 10.2.1-6
I: Validating libgcc-s1 10.2.1-6
I: Retrieving libstdc++6 10.2.1-6
I: Validating libstdc++6 10.2.1-6
I: Retrieving gcc-9-base 9.3.0-22
I: Validating gcc-9-base 9.3.0-22
I: Retrieving libc-bin 2.31-12
I: Validating libc-bin 2.31-12
I: Retrieving libc6 2.31-12
I: Validating libc6 2.31-12
I: Retrieving libgmp10 2:6.2.1+dfsg-1
I: Validating libgmp10 2:6.2.1+dfsg-1
I: Retrieving gpgv 2.2.27-2
I: Validating gpgv 2.2.27-2
I: Retrieving libgnutls30 3.7.1-3
I: Validating libgnutls30 3.7.1-3
I: Retrieving grep 3.6-1
I: Validating grep 3.6-1
I: Retrieving gzip 1.10-4
I: Validating gzip 1.10-4
I: Retrieving hostname 3.23
I: Validating hostname 3.23
I: Retrieving init-system-helpers 1.60
I: Validating init-system-helpers 1.60
I: Retrieving libkeyutils1 1.6.1-2
I: Validating libkeyutils1 1.6.1-2
I: Retrieving libgssapi-krb5-2 1.18.3-5
I: Validating libgssapi-krb5-2 1.18.3-5
I: Retrieving libk5crypto3 1.18.3-5
I: Validating libk5crypto3 1.18.3-5
I: Retrieving libkrb5-3 1.18.3-5
I: Validating libkrb5-3 1.18.3-5
I: Retrieving libkrb5support0 1.18.3-5
I: Validating libkrb5support0 1.18.3-5
I: Retrieving libcap-ng0 0.7.9-2.2+b1
I: Validating libcap-ng0 0.7.9-2.2+b1
I: Retrieving libffi7 3.3-6
I: Validating libffi7 3.3-6
I: Retrieving libgcrypt20 1.8.7-3
I: Validating libgcrypt20 1.8.7-3
I: Retrieving libgpg-error0 1.38-2
I: Validating libgpg-error0 1.38-2
I: Retrieving libidn2-0 2.3.0-5
I: Validating libidn2-0 2.3.0-5
I: Retrieving libnsl2 1.3.0-2
I: Validating libnsl2 1.3.0-2
I: Retrieving libseccomp2 2.5.1-1
I: Validating libseccomp2 2.5.1-1
I: Retrieving libselinux1 3.1-3
I: Validating libselinux1 3.1-3
I: Retrieving libsemanage-common 3.1-1
I: Validating libsemanage-common 3.1-1
I: Retrieving libsemanage1 3.1-1+b2
I: Validating libsemanage1 3.1-1+b2
I: Retrieving libsepol1 3.1-1
I: Validating libsepol1 3.1-1
I: Retrieving libtasn1-6 4.16.0-2
I: Validating libtasn1-6 4.16.0-2
I: Retrieving libtirpc-common 1.3.1-1
I: Validating libtirpc-common 1.3.1-1
I: Retrieving libtirpc3 1.3.1-1
I: Validating libtirpc3 1.3.1-1
I: Retrieving libunistring2 0.9.10-4
I: Validating libunistring2 0.9.10-4
I: Retrieving libcrypt1 1:4.4.18-4
I: Validating libcrypt1 1:4.4.18-4
I: Retrieving libzstd1 1.4.8+dfsg-2.1
I: Validating libzstd1 1.4.8+dfsg-2.1
I: Retrieving lsb-base 11.1.0
I: Validating lsb-base 11.1.0
I: Retrieving liblz4-1 1.9.3-2
I: Validating liblz4-1 1.9.3-2
I: Retrieving mawk 1.3.4.20200120-2
I: Validating mawk 1.3.4.20200120-2
I: Retrieving libtinfo6 6.2+20201114-2
I: Validating libtinfo6 6.2+20201114-2
I: Retrieving ncurses-base 6.2+20201114-2
I: Validating ncurses-base 6.2+20201114-2
I: Retrieving ncurses-bin 6.2+20201114-2
I: Validating ncurses-bin 6.2+20201114-2
I: Retrieving libhogweed6 3.7.2-3
I: Validating libhogweed6 3.7.2-3
I: Retrieving libnettle8 3.7.2-3
I: Validating libnettle8 3.7.2-3
I: Retrieving libssl1.1 1.1.1k-1
I: Validating libssl1.1 1.1.1k-1
I: Retrieving openssl 1.1.1k-1
I: Validating openssl 1.1.1k-1
I: Retrieving libp11-kit0 0.23.22-1
I: Validating libp11-kit0 0.23.22-1
I: Retrieving libpam-modules 1.4.0-7
I: Validating libpam-modules 1.4.0-7
I: Retrieving libpam-modules-bin 1.4.0-7
I: Validating libpam-modules-bin 1.4.0-7
I: Retrieving libpam-runtime 1.4.0-7
I: Validating libpam-runtime 1.4.0-7
I: Retrieving libpam0g 1.4.0-7
I: Validating libpam0g 1.4.0-7
I: Retrieving libpcre2-8-0 10.36-2
I: Validating libpcre2-8-0 10.36-2
I: Retrieving libpcre3 2:8.39-13
I: Validating libpcre3 2:8.39-13
I: Retrieving perl-base 5.32.1-4
I: Validating perl-base 5.32.1-4
I: Retrieving sed 4.7-1
I: Validating sed 4.7-1
I: Retrieving login 1:4.8.1-1
I: Validating login 1:4.8.1-1
I: Retrieving passwd 1:4.8.1-1
I: Validating passwd 1:4.8.1-1
I: Retrieving libsystemd0 247.3-5
I: Validating libsystemd0 247.3-5
I: Retrieving libudev1 247.3-5
I: Validating libudev1 247.3-5
I: Retrieving sysvinit-utils 2.96-7
I: Validating sysvinit-utils 2.96-7
I: Retrieving tar 1.34+dfsg-1
I: Validating tar 1.34+dfsg-1
I: Retrieving tzdata 2021a-1
I: Validating tzdata 2021a-1
I: Retrieving bsdutils 1:2.36.1-7
I: Validating bsdutils 1:2.36.1-7
I: Retrieving libblkid1 2.36.1-7
I: Validating libblkid1 2.36.1-7
I: Retrieving libmount1 2.36.1-7
I: Validating libmount1 2.36.1-7
I: Retrieving libsmartcols1 2.36.1-7
I: Validating libsmartcols1 2.36.1-7
I: Retrieving libuuid1 2.36.1-7
I: Validating libuuid1 2.36.1-7
I: Retrieving mount 2.36.1-7
I: Validating mount 2.36.1-7
I: Retrieving util-linux 2.36.1-7
I: Validating util-linux 2.36.1-7
I: Retrieving libxxhash0 0.8.0-2
I: Validating libxxhash0 0.8.0-2
I: Retrieving liblzma5 5.2.5-2
I: Validating liblzma5 5.2.5-2
I: Retrieving zlib1g 1:1.2.11.dfsg-2
I: Validating zlib1g 1:1.2.11.dfsg-2
I: Chosen extractor for .deb packages: dpkg-deb
I: Extracting libacl1...
I: Extracting adduser...
I: Extracting apt...
I: Extracting libapt-pkg6.0...
I: Extracting libattr1...
I: Extracting libaudit-common...
I: Extracting libaudit1...
I: Extracting base-files...
I: Extracting base-passwd...
I: Extracting bash...
I: Extracting libbz2-1.0...
I: Extracting libdebconfclient0...
I: Extracting coreutils...
I: Extracting dash...
I: Extracting libdb5.3...
I: Extracting debconf...
I: Extracting debian-archive-keyring...
I: Extracting debianutils...
I: Extracting diffutils...
I: Extracting dpkg...
I: Extracting e2fsprogs...
I: Extracting libcom-err2...
I: Extracting libext2fs2...
I: Extracting libss2...
I: Extracting logsave...
I: Extracting findutils...
I: Extracting gcc-10-base...
I: Extracting libgcc-s1...
I: Extracting libstdc++6...
I: Extracting gcc-9-base...
I: Extracting libc-bin...
I: Extracting libc6...
I: Extracting libgmp10...
I: Extracting gpgv...
I: Extracting libgnutls30...
I: Extracting grep...
I: Extracting gzip...
I: Extracting hostname...
I: Extracting init-system-helpers...
I: Extracting libkeyutils1...
I: Extracting libgssapi-krb5-2...
I: Extracting libk5crypto3...
I: Extracting libkrb5-3...
I: Extracting libkrb5support0...
I: Extracting libcap-ng0...
I: Extracting libffi7...
I: Extracting libgcrypt20...
I: Extracting libgpg-error0...
I: Extracting libidn2-0...
I: Extracting libnsl2...
I: Extracting libseccomp2...
I: Extracting libselinux1...
I: Extracting libsemanage-common...
I: Extracting libsemanage1...
I: Extracting libsepol1...
I: Extracting libtasn1-6...
I: Extracting libtirpc-common...
I: Extracting libtirpc3...
I: Extracting libunistring2...
I: Extracting libcrypt1...
I: Extracting libzstd1...
I: Extracting lsb-base...
I: Extracting liblz4-1...
I: Extracting mawk...
I: Extracting libtinfo6...
I: Extracting ncurses-base...
I: Extracting ncurses-bin...
I: Extracting libhogweed6...
I: Extracting libnettle8...
I: Extracting libssl1.1...
I: Extracting libp11-kit0...
I: Extracting libpam-modules...
I: Extracting libpam-modules-bin...
I: Extracting libpam-runtime...
I: Extracting libpam0g...
I: Extracting libpcre2-8-0...
I: Extracting libpcre3...
I: Extracting perl-base...
I: Extracting sed...
I: Extracting login...
I: Extracting passwd...
I: Extracting libsystemd0...
I: Extracting libudev1...
I: Extracting sysvinit-utils...
I: Extracting tar...
I: Extracting tzdata...
I: Extracting bsdutils...
I: Extracting libblkid1...
I: Extracting libmount1...
I: Extracting libsmartcols1...
I: Extracting libuuid1...
I: Extracting mount...
I: Extracting util-linux...
I: Extracting libxxhash0...
I: Extracting liblzma5...
I: Extracting zlib1g...
I: Installing core packages...
I: Unpacking required packages...
I: Unpacking libacl1:amd64...
I: Unpacking adduser...
I: Unpacking apt...
I: Unpacking libapt-pkg6.0:amd64...
I: Unpacking libattr1:amd64...
I: Unpacking libaudit-common...
I: Unpacking libaudit1:amd64...
I: Unpacking base-files...
I: Unpacking base-passwd...
I: Unpacking bash...
I: Unpacking libbz2-1.0:amd64...
I: Unpacking libdebconfclient0:amd64...
I: Unpacking coreutils...
I: Unpacking dash...
I: Unpacking libdb5.3:amd64...
I: Unpacking debconf...
I: Unpacking debian-archive-keyring...
I: Unpacking debianutils...
I: Unpacking diffutils...
I: Unpacking dpkg...
I: Unpacking e2fsprogs...
I: Unpacking libcom-err2:amd64...
I: Unpacking libext2fs2:amd64...
I: Unpacking libss2:amd64...
I: Unpacking logsave...
I: Unpacking findutils...
I: Unpacking gcc-10-base:amd64...
I: Unpacking libgcc-s1:amd64...
I: Unpacking libstdc++6:amd64...
I: Unpacking gcc-9-base:amd64...
I: Unpacking libc-bin...
I: Unpacking libc6:amd64...
I: Unpacking libgmp10:amd64...
I: Unpacking gpgv...
I: Unpacking libgnutls30:amd64...
I: Unpacking grep...
I: Unpacking gzip...
I: Unpacking hostname...
I: Unpacking init-system-helpers...
I: Unpacking libkeyutils1:amd64...
I: Unpacking libgssapi-krb5-2:amd64...
I: Unpacking libk5crypto3:amd64...
I: Unpacking libkrb5-3:amd64...
I: Unpacking libkrb5support0:amd64...
I: Unpacking libcap-ng0:amd64...
I: Unpacking libffi7:amd64...
I: Unpacking libgcrypt20:amd64...
I: Unpacking libgpg-error0:amd64...
I: Unpacking libidn2-0:amd64...
I: Unpacking libnsl2:amd64...
I: Unpacking libseccomp2:amd64...
I: Unpacking libselinux1:amd64...
I: Unpacking libsemanage-common...
I: Unpacking libsemanage1:amd64...
I: Unpacking libsepol1:amd64...
I: Unpacking libtasn1-6:amd64...
I: Unpacking libtirpc-common...
I: Unpacking libtirpc3:amd64...
I: Unpacking libunistring2:amd64...
I: Unpacking libcrypt1:amd64...
I: Unpacking libzstd1:amd64...
I: Unpacking lsb-base...
I: Unpacking liblz4-1:amd64...
I: Unpacking mawk...
I: Unpacking libtinfo6:amd64...
I: Unpacking ncurses-base...
I: Unpacking ncurses-bin...
I: Unpacking libhogweed6:amd64...
I: Unpacking libnettle8:amd64...
I: Unpacking libssl1.1:amd64...
I: Unpacking libp11-kit0:amd64...
I: Unpacking libpam-modules:amd64...
I: Unpacking libpam-modules-bin...
I: Unpacking libpam-runtime...
I: Unpacking libpam0g:amd64...
I: Unpacking libpcre2-8-0:amd64...
I: Unpacking libpcre3:amd64...
I: Unpacking perl-base...
I: Unpacking sed...
I: Unpacking login...
I: Unpacking passwd...
I: Unpacking libsystemd0:amd64...
I: Unpacking libudev1:amd64...
I: Unpacking sysvinit-utils...
I: Unpacking tar...
I: Unpacking tzdata...
I: Unpacking bsdutils...
I: Unpacking libblkid1:amd64...
I: Unpacking libmount1:amd64...
I: Unpacking libsmartcols1:amd64...
I: Unpacking libuuid1:amd64...
I: Unpacking mount...
I: Unpacking util-linux...
I: Unpacking libxxhash0:amd64...
I: Unpacking liblzma5:amd64...
I: Unpacking zlib1g:amd64...
I: Configuring required packages...
I: Configuring lsb-base...
I: Configuring libtirpc-common...
I: Configuring debian-archive-keyring...
I: Configuring libaudit-common...
I: Configuring libsemanage-common...
I: Configuring gcc-10-base:amd64...
I: Configuring ncurses-base...
I: Configuring gcc-9-base:amd64...
I: Configuring libcrypt1:amd64...
I: Configuring libgcc-s1:amd64...
I: Configuring libc6:amd64...
I: Configuring libudev1:amd64...
I: Configuring libsepol1:amd64...
I: Configuring libxxhash0:amd64...
I: Configuring libattr1:amd64...
I: Configuring sysvinit-utils...
I: Configuring libtasn1-6:amd64...
I: Configuring debianutils...
I: Configuring mawk...
I: Configuring libdebconfclient0:amd64...
I: Configuring base-files...
I: Configuring libbz2-1.0:amd64...
I: Configuring base-passwd...
I: Configuring libdb5.3:amd64...
I: Configuring libblkid1:amd64...
I: Configuring libstdc++6:amd64...
I: Configuring libtinfo6:amd64...
I: Configuring bash...
I: Configuring libzstd1:amd64...
I: Configuring libkeyutils1:amd64...
I: Configuring liblzma5:amd64...
I: Configuring libgpg-error0:amd64...
I: Configuring liblz4-1:amd64...
I: Configuring libc-bin...
I: Configuring ncurses-bin...
I: Configuring libffi7:amd64...
I: Configuring libacl1:amd64...
I: Configuring libunistring2:amd64...
I: Configuring libsmartcols1:amd64...
I: Configuring libgcrypt20:amd64...
I: Configuring zlib1g:amd64...
I: Configuring libidn2-0:amd64...
I: Configuring libcom-err2:amd64...
I: Configuring diffutils...
I: Configuring libseccomp2:amd64...
I: Configuring libsystemd0:amd64...
I: Configuring libkrb5support0:amd64...
I: Configuring hostname...
I: Configuring libpcre3:amd64...
I: Configuring libcap-ng0:amd64...
I: Configuring libext2fs2:amd64...
I: Configuring libnettle8:amd64...
I: Configuring libapt-pkg6.0:amd64...
I: Configuring libgmp10:amd64...
I: Configuring libp11-kit0:amd64...
I: Configuring libaudit1:amd64...
I: Configuring libuuid1:amd64...
I: Configuring libss2:amd64...
I: Configuring libpcre2-8-0:amd64...
I: Configuring libk5crypto3:amd64...
I: Configuring logsave...
I: Configuring gpgv...
I: Configuring libhogweed6:amd64...
I: Configuring bsdutils...
I: Configuring e2fsprogs...
I: Configuring libselinux1:amd64...
I: Configuring libgnutls30:amd64...
I: Configuring sed...
I: Configuring findutils...
I: Configuring libmount1:amd64...
I: Configuring libsemanage1:amd64...
I: Configuring tar...
I: Configuring coreutils...
I: Configuring dpkg...
I: Configuring grep...
I: Configuring perl-base...
I: Configuring init-system-helpers...
I: Configuring gzip...
I: Configuring debconf...
I: Configuring tzdata...
I: Configuring libpam0g:amd64...
I: Configuring dash...
I: Configuring libssl1.1:amd64...
I: Configuring libpam-modules-bin...
I: Configuring libkrb5-3:amd64...
I: Configuring libgssapi-krb5-2:amd64...
I: Configuring libtirpc3:amd64...
I: Configuring libnsl2:amd64...
I: Configuring libpam-modules:amd64...
I: Configuring passwd...
I: Configuring libpam-runtime...
I: Configuring login...
I: Configuring adduser...
I: Configuring apt...
I: Configuring util-linux...
I: Configuring mount...
I: Configuring libc-bin...
I: Unpacking the base system...
I: Unpacking apt-transport-https...
I: Unpacking ca-certificates...
I: Unpacking openssl...
I: Configuring the base system...
I: Configuring apt-transport-https...
I: Configuring openssl...
I: Configuring ca-certificates...
I: Configuring ca-certificates...
I: Base system installed successfully.
0
Download required archives containing scripts, initrd-skel, etc...
--2021-06-02 08:47:59-- https://raw.githubusercontent.com/DebianDog/MakeLive/gh-pages/dog-boot-bullseye-20210118.tar.gz
Resolving raw.githubusercontent.com (raw.githubusercontent.com)... 185.199.108.133, 185.199.109.133, 185.199.110.133, ...
Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|185.199.108.133|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 5124688 (4.9M) [application/octet-stream]
Saving to: ‘dog-boot-bullseye-20210118.tar.gz’
dog-boot-bullseye-2 100%[===================>] 4.89M 22.4MB/s in 0.2s
2021-06-02 08:47:59 (22.4 MB/s) - ‘dog-boot-bullseye-20210118.tar.gz’ saved [5124688/5124688]
--2021-06-02 08:47:59-- https://raw.githubusercontent.com/DebianDog/MakeLive/gh-pages/isodata-bullseye-uefi.tar.gz
Resolving raw.githubusercontent.com (raw.githubusercontent.com)... 185.199.108.133, 185.199.109.133, 185.199.110.133, ...
Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|185.199.108.133|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 7510777 (7.2M) [application/octet-stream]
Saving to: ‘isodata-bullseye-uefi.tar.gz’
isodata-bullseye-ue 100%[===================>] 7.16M 27.7MB/s in 0.3s
2021-06-02 08:48:00 (27.7 MB/s) - ‘isodata-bullseye-uefi.tar.gz’ saved [7510777/7510777]
--2021-06-02 08:48:00-- https://raw.githubusercontent.com/DebianDog/MakeLive/gh-pages/initrdport-bullseye.tar.gz
Resolving raw.githubusercontent.com (raw.githubusercontent.com)... 185.199.108.133, 185.199.109.133, 185.199.110.133, ...
Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|185.199.108.133|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 1363210 (1.3M) [application/octet-stream]
Saving to: ‘initrdport-bullseye.tar.gz’
initrdport-bullseye 100%[===================>] 1.30M --.-KB/s in 0.08s
2021-06-02 08:48:00 (16.6 MB/s) - ‘initrdport-bullseye.tar.gz’ saved [1363210/1363210]
OK
Extracting...
OK
Copy scripts, required for porteus-boot, to the chroot...
OK
Hit:1 http://deb.debian.org/debian bullseye InRelease
Get:2 http://dl.google.com/linux/chrome/deb stable InRelease [1811 B]
Get:3 http://security.debian.org bullseye-security InRelease [44.1 kB]
Err:2 http://dl.google.com/linux/chrome/deb stable InRelease
The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 78BD65473CB3BD13
Ign:4 https://github.com/doglinux/bulldog/raw/master/amd64 ./ InRelease
Get:5 http://security.debian.org bullseye-security/main amd64 Packages [812 B]
Get:6 http://security.debian.org bullseye-security/main Translation-en [596 B]
Get:7 http://deb.debian.org/debian bullseye-updates InRelease [40.1 kB]
Err:8 https://github.com/doglinux/bulldog/raw/master/amd64 ./ Release
Certificate verification failed: The certificate is NOT trusted. The revocation or OCSP data are old and have been superseded. Could not handshake: Error in the certificate verification. [IP: 185.199.108.133 443]
Get:9 http://deb.debian.org/debian bullseye-proposed-updates InRelease [39.4 kB]
Get:10 http://deb.debian.org/debian bullseye/main Translation-en [6250 kB]
Get:11 http://deb.debian.org/debian bullseye/contrib amd64 Packages [50.4 kB]
Get:12 http://deb.debian.org/debian bullseye/contrib Translation-en [46.9 kB]
Get:13 http://deb.debian.org/debian bullseye/non-free amd64 Packages [94.0 kB]
Get:14 http://deb.debian.org/debian bullseye/non-free Translation-en [91.3 kB]
Reading package lists... Done
W: GPG error: http://dl.google.com/linux/chrome/deb stable InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 78BD65473CB3BD13
E: The repository 'http://dl.google.com/linux/chrome/deb stable InRelease' is not signed.
N: Updating from such a repository can't be done securely, and is therefore disabled by default.
N: See apt-secure(8) manpage for repository creation and user configuration details.
E: The repository 'https://github.com/doglinux/bulldog/raw/master/amd64 ./ Release' does not have a Release file.
N: Updating from such a repository can't be done securely, and is therefore disabled by default.
N: See apt-secure(8) manpage for repository creation and user configuration details.
Hit:1 http://security.debian.org bullseye-security InRelease
Get:2 http://dl.google.com/linux/chrome/deb stable InRelease [1811 B]
Ign:3 https://github.com/doglinux/bulldog/raw/master/amd64 ./ InRelease
Err:4 https://github.com/doglinux/bulldog/raw/master/amd64 ./ Release
Certificate verification failed: The certificate is NOT trusted. The revocation or OCSP data are old and have been superseded. Could not handshake: Error in the certificate verification. [IP: 185.199.108.133 443]
Hit:5 http://deb.debian.org/debian bullseye InRelease
Hit:6 http://deb.debian.org/debian bullseye-updates InRelease
Err:2 http://dl.google.com/linux/chrome/deb stable InRelease
The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 78BD65473CB3BD13
Hit:7 http://deb.debian.org/debian bullseye-proposed-updates InRelease
Reading package lists... Done
E: The repository 'https://github.com/doglinux/bulldog/raw/master/amd64 ./ Release' does not have a Release file.
N: Updating from such a repository can't be done securely, and is therefore disabled by default.
N: See apt-secure(8) manpage for repository creation and user configuration details.
W: GPG error: http://dl.google.com/linux/chrome/deb stable InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 78BD65473CB3BD13
E: The repository 'http://dl.google.com/linux/chrome/deb stable InRelease' is not signed.
N: Updating from such a repository can't be done securely, and is therefore disabled by default.
N: See apt-secure(8) manpage for repository creation and user configuration details.
Please set the password for 'root'
Also now you may want to add to or edit files in bullseye/chroot
New password:
Retype new password:
passwd: password updated successfully
Adding group `fuse' (GID 1000) ...
Done.
Adding group `wheel' (GID 1001) ...
Done.
Add user 'puppy'...
Adding user `puppy' ...
Adding new group `puppy' (1002) ...
Adding new user `puppy' (1000) with group `puppy' ...
The home directory `/home/puppy' already exists. Not copying from `/etc/skel'.
Please set the password for user 'puppy'
New password:
Retype new password:
passwd: password updated successfully
Install keyboard-configuration and more required packages
Reading package lists... Done
Building dependency tree... Done
The following additional packages will be installed:
dbus dmsetup gnupg-l10n gnupg-utils gpg gpg-agent gpg-wks-client
gpg-wks-server gpgconf gpgsm libapparmor1 libargon2-1 libassuan0 libcap2
libcryptsetup12 libdbus-1-3 libdevmapper1.02.1 libexpat1 libjson-c5 libkmod2
libksba8 libldap-2.4-2 liblocale-gettext-perl libncursesw6 libnpth0 libpopt0
libpsl5 libreadline8 libsasl2-2 libsasl2-modules-db libsqlite3-0
pinentry-curses readline-common
Suggested packages:
dosfstools keyutils default-dbus-session-bus | dbus-session-bus
dbus-user-session libpam-systemd pinentry-gnome3 tor parcimonie xloadimage
scdaemon pinentry-doc readline-doc
Recommended packages:
cryptsetup-initramfs cryptsetup-run policykit-1 libldap-common libgpm2
publicsuffix libsasl2-modules
The following packages will be REMOVED:
libsystemd0
The following NEW packages will be installed:
apt-utils cryptsetup cryptsetup-bin dbus dialog dirmngr dmsetup elogind
gnupg gnupg-l10n gnupg-utils gpg gpg-agent gpg-wks-client gpg-wks-server
gpgconf gpgsm keyboard-configuration libapparmor1 libargon2-1 libassuan0
libcap2 libcryptsetup12 libdbus-1-3 libdevmapper1.02.1 libelogind0 libexpat1
libjson-c5 libkmod2 libksba8 libldap-2.4-2 liblocale-gettext-perl
libncursesw6 libnpth0 libpam-elogind libpopt0 libpsl5 libreadline8
libsasl2-2 libsasl2-modules-db libsqlite3-0 pinentry-curses readline-common
udev wget xz-utils
0 upgraded, 46 newly installed, 1 to remove and 0 not upgraded.
Need to get 16.2 MB of archives.
After this operation, 46.8 MB of additional disk space will be used.
Get:1 http://deb.debian.org/debian bullseye/main amd64 libcap2 amd64 1:2.44-1 [23.6 kB]
Get:2 http://deb.debian.org/debian bullseye/main amd64 libelogind0 amd64 246.9.1-1+debian1 [250 kB]
Get:3 http://deb.debian.org/debian bullseye/main amd64 libapparmor1 amd64 2.13.6-10 [99.3 kB]
Get:4 http://deb.debian.org/debian bullseye/main amd64 libdbus-1-3 amd64 1.12.20-2 [219 kB]
Get:5 http://deb.debian.org/debian bullseye/main amd64 libexpat1 amd64 2.2.10-2 [96.9 kB]
Get:6 http://deb.debian.org/debian bullseye/main amd64 dbus amd64 1.12.20-2 [239 kB]
Get:7 http://deb.debian.org/debian bullseye/main amd64 elogind amd64 246.9.1-1+debian1 [656 kB]
Get:8 http://deb.debian.org/debian bullseye/main amd64 liblocale-gettext-perl amd64 1.07-4+b1 [19.0 kB]
Get:9 http://deb.debian.org/debian bullseye/main amd64 keyboard-configuration all 1.202 [424 kB]
Get:10 http://deb.debian.org/debian bullseye/main amd64 apt-utils amd64 2.2.3 [439 kB]
Get:11 http://deb.debian.org/debian bullseye/main amd64 readline-common all 8.1-1 [73.7 kB]
Get:12 http://deb.debian.org/debian bullseye/main amd64 libreadline8 amd64 8.1-1 [169 kB]
Get:13 http://deb.debian.org/debian bullseye/main amd64 libkmod2 amd64 28-1 [55.6 kB]
Get:14 http://deb.debian.org/debian bullseye/main amd64 udev amd64 247.3-5 [1463 kB]
Get:15 http://deb.debian.org/debian bullseye/main amd64 libpsl5 amd64 0.21.0-1.2 [57.3 kB]
Get:16 http://deb.debian.org/debian bullseye/main amd64 wget amd64 1.21-1+b1 [964 kB]
Get:17 http://deb.debian.org/debian bullseye/main amd64 xz-utils amd64 5.2.5-2 [220 kB]
Get:18 http://deb.debian.org/debian bullseye/main amd64 libargon2-1 amd64 0~20171227-0.2 [19.6 kB]
Get:19 http://deb.debian.org/debian bullseye/main amd64 dmsetup amd64 2:1.02.175-2.1 [92.1 kB]
Get:20 http://deb.debian.org/debian bullseye/main amd64 libdevmapper1.02.1 amd64 2:1.02.175-2.1 [143 kB]
Get:21 http://deb.debian.org/debian bullseye/main amd64 libjson-c5 amd64 0.15-2 [42.8 kB]
Get:22 http://deb.debian.org/debian bullseye/main amd64 libcryptsetup12 amd64 2:2.3.5-1 [244 kB]
Get:23 http://deb.debian.org/debian bullseye/main amd64 libpopt0 amd64 1.18-2 [49.6 kB]
Get:24 http://deb.debian.org/debian bullseye/main amd64 cryptsetup-bin amd64 2:2.3.5-1 [411 kB]
Get:25 http://deb.debian.org/debian bullseye/main amd64 cryptsetup amd64 2:2.3.5-1 [225 kB]
Get:26 http://deb.debian.org/debian bullseye/main amd64 libncursesw6 amd64 6.2+20201114-2 [132 kB]
Get:27 http://deb.debian.org/debian bullseye/main amd64 dialog amd64 1.3-20201126-1 [288 kB]
Get:28 http://deb.debian.org/debian bullseye/main amd64 libassuan0 amd64 2.5.3-7.1 [50.5 kB]
Get:29 http://deb.debian.org/debian bullseye/main amd64 gpgconf amd64 2.2.27-2 [547 kB]
Get:30 http://deb.debian.org/debian bullseye/main amd64 libksba8 amd64 1.5.0-3 [123 kB]
Get:31 http://deb.debian.org/debian bullseye/main amd64 libsasl2-modules-db amd64 2.1.27+dfsg-2.1 [69.1 kB]
Get:32 http://deb.debian.org/debian bullseye/main amd64 libsasl2-2 amd64 2.1.27+dfsg-2.1 [106 kB]
Get:33 http://deb.debian.org/debian bullseye/main amd64 libldap-2.4-2 amd64 2.4.57+dfsg-3 [232 kB]
Get:34 http://deb.debian.org/debian bullseye/main amd64 libnpth0 amd64 1.6-3 [19.0 kB]
Get:35 http://deb.debian.org/debian bullseye/main amd64 dirmngr amd64 2.2.27-2 [762 kB]
Get:36 http://deb.debian.org/debian bullseye/main amd64 gnupg-l10n all 2.2.27-2 [1084 kB]
Get:37 http://deb.debian.org/debian bullseye/main amd64 gnupg-utils amd64 2.2.27-2 [905 kB]
Get:38 http://deb.debian.org/debian bullseye/main amd64 libsqlite3-0 amd64 3.34.1-3 [797 kB]
Get:39 http://deb.debian.org/debian bullseye/main amd64 gpg amd64 2.2.27-2 [927 kB]
Get:40 http://deb.debian.org/debian bullseye/main amd64 pinentry-curses amd64 1.1.0-4 [64.9 kB]
Get:41 http://deb.debian.org/debian bullseye/main amd64 gpg-agent amd64 2.2.27-2 [669 kB]
Get:42 http://deb.debian.org/debian bullseye/main amd64 gpg-wks-client amd64 2.2.27-2 [523 kB]
Get:43 http://deb.debian.org/debian bullseye/main amd64 gpg-wks-server amd64 2.2.27-2 [516 kB]
Get:44 http://deb.debian.org/debian bullseye/main amd64 gpgsm amd64 2.2.27-2 [645 kB]
Get:45 http://deb.debian.org/debian bullseye/main amd64 gnupg all 2.2.27-2 [825 kB]
Get:46 http://deb.debian.org/debian bullseye/main amd64 libpam-elogind amd64 246.9.1-1+debian1 [209 kB]
Fetched 16.2 MB in 1s (27.9 MB/s)
debconf: delaying package configuration, since apt-utils is not installed
Selecting previously unselected package libcap2:amd64.
(Reading database ... 6965 files and directories currently installed.)
Preparing to unpack .../libcap2_1%3a2.44-1_amd64.deb ...
Unpacking libcap2:amd64 (1:2.44-1) ...
dpkg: libsystemd0:amd64: dependency problems, but removing anyway as you requested:
util-linux depends on libsystemd0.
libapt-pkg6.0:amd64 depends on libsystemd0 (>= 221).
bsdutils depends on libsystemd0.
apt depends on libsystemd0.
(Reading database ... 6971 files and directories currently installed.)
Removing libsystemd0:amd64 (247.3-5) ...
Selecting previously unselected package libelogind0:amd64.
(Reading database ... 6966 files and directories currently installed.)
Preparing to unpack .../libelogind0_246.9.1-1+debian1_amd64.deb ...
Unpacking libelogind0:amd64 (246.9.1-1+debian1) ...
Setting up libcap2:amd64 (1:2.44-1) ...
Setting up libelogind0:amd64 (246.9.1-1+debian1) ...
Selecting previously unselected package libapparmor1:amd64.
(Reading database ... 6973 files and directories currently installed.)
Preparing to unpack .../00-libapparmor1_2.13.6-10_amd64.deb ...
Unpacking libapparmor1:amd64 (2.13.6-10) ...
Selecting previously unselected package libdbus-1-3:amd64.
Preparing to unpack .../01-libdbus-1-3_1.12.20-2_amd64.deb ...
Unpacking libdbus-1-3:amd64 (1.12.20-2) ...
Selecting previously unselected package libexpat1:amd64.
Preparing to unpack .../02-libexpat1_2.2.10-2_amd64.deb ...
Unpacking libexpat1:amd64 (2.2.10-2) ...
Selecting previously unselected package dbus.
Preparing to unpack .../03-dbus_1.12.20-2_amd64.deb ...
Unpacking dbus (1.12.20-2) ...
Selecting previously unselected package elogind.
Preparing to unpack .../04-elogind_246.9.1-1+debian1_amd64.deb ...
Unpacking elogind (246.9.1-1+debian1) ...
Selecting previously unselected package liblocale-gettext-perl.
Preparing to unpack .../05-liblocale-gettext-perl_1.07-4+b1_amd64.deb ...
Unpacking liblocale-gettext-perl (1.07-4+b1) ...
Selecting previously unselected package keyboard-configuration.
Preparing to unpack .../06-keyboard-configuration_1.202_all.deb ...
Unpacking keyboard-configuration (1.202) ...
Selecting previously unselected package apt-utils.
Preparing to unpack .../07-apt-utils_2.2.3_amd64.deb ...
Unpacking apt-utils (2.2.3) ...
Selecting previously unselected package readline-common.
Preparing to unpack .../08-readline-common_8.1-1_all.deb ...
Unpacking readline-common (8.1-1) ...
Selecting previously unselected package libreadline8:amd64.
Preparing to unpack .../09-libreadline8_8.1-1_amd64.deb ...
Unpacking libreadline8:amd64 (8.1-1) ...
Selecting previously unselected package libkmod2:amd64.
Preparing to unpack .../10-libkmod2_28-1_amd64.deb ...
Unpacking libkmod2:amd64 (28-1) ...
Selecting previously unselected package udev.
Preparing to unpack .../11-udev_247.3-5_amd64.deb ...
Unpacking udev (247.3-5) ...
Selecting previously unselected package libpsl5:amd64.
Preparing to unpack .../12-libpsl5_0.21.0-1.2_amd64.deb ...
Unpacking libpsl5:amd64 (0.21.0-1.2) ...
Selecting previously unselected package wget.
Preparing to unpack .../13-wget_1.21-1+b1_amd64.deb ...
Unpacking wget (1.21-1+b1) ...
Selecting previously unselected package xz-utils.
Preparing to unpack .../14-xz-utils_5.2.5-2_amd64.deb ...
Unpacking xz-utils (5.2.5-2) ...
Selecting previously unselected package libargon2-1:amd64.
Preparing to unpack .../15-libargon2-1_0~20171227-0.2_amd64.deb ...
Unpacking libargon2-1:amd64 (0~20171227-0.2) ...
Selecting previously unselected package dmsetup.
Preparing to unpack .../16-dmsetup_2%3a1.02.175-2.1_amd64.deb ...
Unpacking dmsetup (2:1.02.175-2.1) ...
Selecting previously unselected package libdevmapper1.02.1:amd64.
Preparing to unpack .../17-libdevmapper1.02.1_2%3a1.02.175-2.1_amd64.deb ...
Unpacking libdevmapper1.02.1:amd64 (2:1.02.175-2.1) ...
Selecting previously unselected package libjson-c5:amd64.
Preparing to unpack .../18-libjson-c5_0.15-2_amd64.deb ...
Unpacking libjson-c5:amd64 (0.15-2) ...
Selecting previously unselected package libcryptsetup12:amd64.
Preparing to unpack .../19-libcryptsetup12_2%3a2.3.5-1_amd64.deb ...
Unpacking libcryptsetup12:amd64 (2:2.3.5-1) ...
Selecting previously unselected package libpopt0:amd64.
Preparing to unpack .../20-libpopt0_1.18-2_amd64.deb ...
Unpacking libpopt0:amd64 (1.18-2) ...
Selecting previously unselected package cryptsetup-bin.
Preparing to unpack .../21-cryptsetup-bin_2%3a2.3.5-1_amd64.deb ...
Unpacking cryptsetup-bin (2:2.3.5-1) ...
Selecting previously unselected package cryptsetup.
Preparing to unpack .../22-cryptsetup_2%3a2.3.5-1_amd64.deb ...
Unpacking cryptsetup (2:2.3.5-1) ...
Selecting previously unselected package libncursesw6:amd64.
Preparing to unpack .../23-libncursesw6_6.2+20201114-2_amd64.deb ...
Unpacking libncursesw6:amd64 (6.2+20201114-2) ...
Selecting previously unselected package dialog.
Preparing to unpack .../24-dialog_1.3-20201126-1_amd64.deb ...
Unpacking dialog (1.3-20201126-1) ...
Selecting previously unselected package libassuan0:amd64.
Preparing to unpack .../25-libassuan0_2.5.3-7.1_amd64.deb ...
Unpacking libassuan0:amd64 (2.5.3-7.1) ...
Selecting previously unselected package gpgconf.
Preparing to unpack .../26-gpgconf_2.2.27-2_amd64.deb ...
Unpacking gpgconf (2.2.27-2) ...
Selecting previously unselected package libksba8:amd64.
Preparing to unpack .../27-libksba8_1.5.0-3_amd64.deb ...
Unpacking libksba8:amd64 (1.5.0-3) ...
Selecting previously unselected package libsasl2-modules-db:amd64.
Preparing to unpack .../28-libsasl2-modules-db_2.1.27+dfsg-2.1_amd64.deb ...
Unpacking libsasl2-modules-db:amd64 (2.1.27+dfsg-2.1) ...
Selecting previously unselected package libsasl2-2:amd64.
Preparing to unpack .../29-libsasl2-2_2.1.27+dfsg-2.1_amd64.deb ...
Unpacking libsasl2-2:amd64 (2.1.27+dfsg-2.1) ...
Selecting previously unselected package libldap-2.4-2:amd64.
Preparing to unpack .../30-libldap-2.4-2_2.4.57+dfsg-3_amd64.deb ...
Unpacking libldap-2.4-2:amd64 (2.4.57+dfsg-3) ...
Selecting previously unselected package libnpth0:amd64.
Preparing to unpack .../31-libnpth0_1.6-3_amd64.deb ...
Unpacking libnpth0:amd64 (1.6-3) ...
Selecting previously unselected package dirmngr.
Preparing to unpack .../32-dirmngr_2.2.27-2_amd64.deb ...
Unpacking dirmngr (2.2.27-2) ...
Selecting previously unselected package gnupg-l10n.
Preparing to unpack .../33-gnupg-l10n_2.2.27-2_all.deb ...
Unpacking gnupg-l10n (2.2.27-2) ...
Selecting previously unselected package gnupg-utils.
Preparing to unpack .../34-gnupg-utils_2.2.27-2_amd64.deb ...
Unpacking gnupg-utils (2.2.27-2) ...
Selecting previously unselected package libsqlite3-0:amd64.
Preparing to unpack .../35-libsqlite3-0_3.34.1-3_amd64.deb ...
Unpacking libsqlite3-0:amd64 (3.34.1-3) ...
Selecting previously unselected package gpg.
Preparing to unpack .../36-gpg_2.2.27-2_amd64.deb ...
Unpacking gpg (2.2.27-2) ...
Selecting previously unselected package pinentry-curses.
Preparing to unpack .../37-pinentry-curses_1.1.0-4_amd64.deb ...
Unpacking pinentry-curses (1.1.0-4) ...
Selecting previously unselected package gpg-agent.
Preparing to unpack .../38-gpg-agent_2.2.27-2_amd64.deb ...
Unpacking gpg-agent (2.2.27-2) ...
Selecting previously unselected package gpg-wks-client.
Preparing to unpack .../39-gpg-wks-client_2.2.27-2_amd64.deb ...
Unpacking gpg-wks-client (2.2.27-2) ...
Selecting previously unselected package gpg-wks-server.
Preparing to unpack .../40-gpg-wks-server_2.2.27-2_amd64.deb ...
Unpacking gpg-wks-server (2.2.27-2) ...
Selecting previously unselected package gpgsm.
Preparing to unpack .../41-gpgsm_2.2.27-2_amd64.deb ...
Unpacking gpgsm (2.2.27-2) ...
Selecting previously unselected package gnupg.
Preparing to unpack .../42-gnupg_2.2.27-2_all.deb ...
Unpacking gnupg (2.2.27-2) ...
Selecting previously unselected package libpam-elogind:amd64.
Preparing to unpack .../43-libpam-elogind_246.9.1-1+debian1_amd64.deb ...
Unpacking libpam-elogind:amd64 (246.9.1-1+debian1) ...
Setting up libksba8:amd64 (1.5.0-3) ...
Setting up libexpat1:amd64 (2.2.10-2) ...
Setting up libapparmor1:amd64 (2.13.6-10) ...
Setting up libpsl5:amd64 (0.21.0-1.2) ...
Setting up apt-utils (2.2.3) ...
Setting up wget (1.21-1+b1) ...
Setting up libargon2-1:amd64 (0~20171227-0.2) ...
Setting up libsqlite3-0:amd64 (3.34.1-3) ...
Setting up libnpth0:amd64 (1.6-3) ...
Setting up libassuan0:amd64 (2.5.3-7.1) ...
Setting up libsasl2-modules-db:amd64 (2.1.27+dfsg-2.1) ...
Setting up gnupg-l10n (2.2.27-2) ...
Setting up libdbus-1-3:amd64 (1.12.20-2) ...
Setting up dbus (1.12.20-2) ...
invoke-rc.d: could not determine current runlevel
invoke-rc.d: WARNING: No init system and policy-rc.d missing! Defaulting to block.
Setting up xz-utils (5.2.5-2) ...
update-alternatives: using /usr/bin/xz to provide /usr/bin/lzma (lzma) in auto mode
Setting up libncursesw6:amd64 (6.2+20201114-2) ...
Setting up libsasl2-2:amd64 (2.1.27+dfsg-2.1) ...
Setting up elogind (246.9.1-1+debian1) ...
invoke-rc.d: could not determine current runlevel
invoke-rc.d: WARNING: No init system and policy-rc.d missing! Defaulting to block.
Setting up libjson-c5:amd64 (0.15-2) ...
Setting up readline-common (8.1-1) ...
Setting up liblocale-gettext-perl (1.07-4+b1) ...
Setting up libkmod2:amd64 (28-1) ...
Setting up libpopt0:amd64 (1.18-2) ...
Setting up pinentry-curses (1.1.0-4) ...
Setting up libpam-elogind:amd64 (246.9.1-1+debian1) ...
Setting up libreadline8:amd64 (8.1-1) ...
Setting up libldap-2.4-2:amd64 (2.4.57+dfsg-3) ...
Setting up dialog (1.3-20201126-1) ...
Setting up udev (247.3-5) ...
A chroot environment has been detected, udev not started.
Setting up gpgconf (2.2.27-2) ...
Setting up keyboard-configuration (1.202) ...
Package configuration
──┌────────────────Configuring keyboard-configuration───────────────────┐─────
│ Please select the layout matching the keyboard for this machine. │
│ │
│ Keyboard layout: │
│ ┌─────────────────────────────────────────────────────────────────┐ │
│ │English (US) │ │
│ │English (US) - Cherokee │ │
│ │English (US) - English (Colemak) │ │
│ │English (US) - English (Dvorak) │ │
│ │English (US) - English (Dvorak, alt. intl.) │ │
│ │English (US) - English (Dvorak, intl., with dead keys) │ │
│ └────v(+)─────────────────────────────────────────────────27%─────┘ │
├─────────────────────────────────────────────────────────────────────┤
│ < OK > <Cancel> │
└─────────────────────────────────────────────────────────────────────┘
Setting up gpg (2.2.27-2) ...
Setting up gnupg-utils (2.2.27-2) ...
Setting up gpg-agent (2.2.27-2) ...
Setting up gpgsm (2.2.27-2) ...
Setting up dirmngr (2.2.27-2) ...
Setting up gpg-wks-server (2.2.27-2) ...
Setting up gpg-wks-client (2.2.27-2) ...
Setting up gnupg (2.2.27-2) ...
Setting up libdevmapper1.02.1:amd64 (2:1.02.175-2.1) ...
Setting up dmsetup (2:1.02.175-2.1) ...
Setting up libcryptsetup12:amd64 (2:2.3.5-1) ...
Setting up cryptsetup-bin (2:2.3.5-1) ...
Setting up cryptsetup (2:2.3.5-1) ...
Processing triggers for libc-bin (2.31-12) ...
Warning: apt-key is deprecated. Manage keyring files in trusted.gpg.d instead (see apt-key(8)).
OK
Get:1 http://dl.google.com/linux/chrome/deb stable InRelease [1811 B]
Hit:2 http://security.debian.org bullseye-security InRelease
Hit:3 http://deb.debian.org/debian bullseye InRelease
Get:5 http://dl.google.com/linux/chrome/deb stable/main amd64 Packages [1082 B]
Ign:4 https://github.com/doglinux/bulldog/raw/master/amd64 ./ InRelease
Err:6 https://github.com/doglinux/bulldog/raw/master/amd64 ./ Release
Certificate verification failed: The certificate is NOT trusted. The revocation or OCSP data are old and have been superseded. Could not handshake: Error in the certificate verification. [IP: 185.199.108.133 443]
Hit:7 http://deb.debian.org/debian bullseye-updates InRelease
Hit:8 http://deb.debian.org/debian bullseye-proposed-updates InRelease
Reading package lists... Done
E: The repository 'https://github.com/doglinux/bulldog/raw/master/amd64 ./ Release' does not have a Release file.
N: Updating from such a repository can't be done securely, and is therefore disabled by default.
N: See apt-secure(8) manpage for repository creation and user configuration details.
Hit:1 http://deb.debian.org/debian bullseye InRelease
Hit:2 http://deb.debian.org/debian bullseye-updates InRelease
Hit:3 http://security.debian.org bullseye-security InRelease
Hit:4 http://deb.debian.org/debian bullseye-proposed-updates InRelease
Hit:6 http://dl.google.com/linux/chrome/deb stable InRelease
Ign:5 https://github.com/doglinux/bulldog/raw/master/amd64 ./ InRelease
Err:7 https://github.com/doglinux/bulldog/raw/master/amd64 ./ Release
Certificate verification failed: The certificate is NOT trusted. The revocation or OCSP data are old and have been superseded. Could not handshake: Error in the certificate verification. [IP: 185.199.108.133 443]
Reading package lists... Done
E: The repository 'https://github.com/doglinux/bulldog/raw/master/amd64 ./ Release' does not have a Release file.
N: Updating from such a repository can't be done securely, and is therefore disabled by default.
N: See apt-secure(8) manpage for repository creation and user configuration details.
Checking packages . . .
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
Package leafpad is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source
E: Package 'leafpad' has no installation candidate
E: Unable to locate package pfind
E: Version '3.6.1-4.3' for 'openbox' was not found
E: Unable to locate package gtkdialog
E: Unable to locate package obshutdown
E: Unable to locate package pup-volume-monitor
E: Unable to locate package peasywifi
E: Unable to locate package chpupsocket
E: Unable to locate package edit-sfs-pcmanfm
E: Unable to locate package filemnt-pcmanfm
E: Unable to locate package remaster-scripts
E: Unable to locate package quick-remaster
E: Unable to locate package apt2sfs
E: Unable to locate package sfsload
E: Unable to locate package fixdepinstall
E: Unable to locate package greybird-theme-dd-stretch
E: Unable to locate package makedebpackage
E: Unable to locate package sound-card-selector
E: Unable to locate package alsamixer-tray
E: Unable to locate package peasyclock
E: Unable to locate package pack-it
E: Unable to locate package repo-conf
E: Unable to locate package upgrade-kernel
Sorry, there are one or more errors, see above.
Could be a typo in a package name.
Exiting . . .
Unmounting mount binds in chroot
root@live:~/Downloads#
Pls ignore above.
I tried few hours later and it's ok.
My guess, this is related to this error that resolved itself now.
Code: Select all
]Ign:5 https://github.com/doglinux/bulldog/raw/master/amd64 ./ InRelease
Err:7 https://github.com/doglinux/bulldog/raw/master/amd64 ./ Release
Certificate verification failed: The certificate is NOT trusted. The revocation or OCSP data are old and have been superseded. Could not handshake: Error in the certificate verification. [IP: 185.199.108.133 443]
Reading package lists... Done
E: The repository 'https://github.com/doglinux/bulldog/raw/master/amd64 ./ Release' does not have a Release file.
N: Updating from such a repository can't be done securely, and is therefore disabled by default.
N: See apt-secure(8) manpage for repository creation and user configuration details.
Checking packages . . .
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
Package leafpad is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source
E: Package 'leafpad' has no installation candidate
E: Unable to locate package pfindHi Fred: There has been some discussion in the Puppy section about pupmode=13 not working with overlayfs.
But I ran the Bullseye Starter Kit with EXIT mode and it worked fine. Am I missing something?
Bill
The EXIT mode works OK indeed with overlay (not much tested though), it wasn't working OOTB, I've done lots of modifications compared to the previous aufs method.
So should be possible to work with Puppy too, I guess. It should start in the init script (by using overlay) and probably requires a complete rewrite of the /usr/bin/snapmergepuppy script (that takes care of copying the changes at shutdown).
Part of the "finit" script (functions for "init" in the initrd1.xz) (if directory /memory/images/changes-exit exists it will be part of the mounted layers and the EXIT mode will be active (and by running save2flash or snapmergepuppy at shutdown or on demand)
Code: Select all
LOWLIST=""
for x in `cat /tmp/modules`;
do
NAME=`basename $x`;
mkdir /memory/images/$NAME;
mount -o loop $x /memory/images/$NAME 2>/dev/null
if [ $? -eq 0 ];
then
echo " $m $NAME";
LOWLIST=/memory/images/${NAME}:${LOWLIST}
else
echo $i"[1;36m""Cannot read $NAME - corrupted module?""[0m";
rmdir /memory/images/$NAME
fi
done
if [ -d /memory/images/changes-exit ]
then
LOWLIST=/memory/images/changes-exit/upperdir:${LOWLIST}
cp -a /memory/images/changes-exit/workdir/* $WORKDIR/. 2> /dev/null
fi
LOWLIST=`echo $LOWLIST | sed 's/:$//'`
#echo "mount -t overlay -o upperdir=$UPPERDIR,lowerdir=$LOWLIST,workdir=$WORKDIR overlay /union"
mount -t overlay -o upperdir=$UPPERDIR,lowerdir=$LOWLIST,workdir=$WORKDIR overlay /unionAFAIK, official Porteus releases are still using aufs, but there were some experiments with overlayfs that I saw in the Porteus forum, and I took big parts of the code and setup from there, but can't remember from who btw.
Fred
Thanks.
BTW, I consider the two recent developments - overlayfs and the smaller initrd - to be complete successes.
So, does the "My Squash Loader 2.1" implement the overlay way of doing things just for squash files loaded on the fly?
Or did installing it on my Stretch installation do something else?
My Squash Loader is a front-end for the loadmodule tool. The original loadmodule was based on aufs. But when Fred switched to overlayfs, he re-wrote it to use symlinking.
My Squash Loader v2.1 has its own version of loadmodule. It also uses symlinking, but a variation of the technique.
If you look in /usr/local/bin, you should see the original loadmodule renamed as loadmodule.000. If you prefer to use the original version, you can switch it back.
Hi Fred: Master PDF Editor v4 in your Bullseye repo is broken now that Bullseye has migrated to QT5.
Luckily, I have v4 packaged as a squashfs module from Buster that still works in Bullseye.
Hi fred
i did try the script, it work for about 20 minutes then stop with error:
Hello Luke2021,
Mmm... cannot reproduce the error you got about keyboard-configuration and libgtk3-nocsd.
I assume you ran from Puppy the appimage (mklive-bullseye64), pls tell me if you did different.
Anyway I tested on FossaPup running the appimage and all went fine.
Perhaps it's a temporary failure, so I'd suggest that you try running it again.
Fred
yes appimage (mklive-bullseye64) in FussaPup64 from USB pendrive live.
the chose keyboard popup 3 times, the last one exit with error.
is there any idea ? maybe change FussaPup for something else or use another script ?
Yes, trying from another Puppy might work (maybe my FossaPup is different version, so possibly that's why it could work ok for me).
Also, note that the timezone and date must be correctly set, I've found that the build will fail if not.
the chose keyboard popup 3 times, the last one exit with error.
I don't understand that, you saw 3 times after each other the keyboard-configuration dialog ?
You did press "Enter" after choice made ?
EDIT: The build must be done on a Linux filesystem, e.g. ext3, did you do that ? (and with enough free space ?)
keyboard-configuration dialog pop up, i click enter, script continue working...
few minutes later it pop up 2nd time, i click enter, script continue working...
few more minutes pop up 3rd time, this time after i hit enter i got error and script stop
No
i work from live usb pendrive created by RUFUS, FossaPup64 with 1gb savefile.
Luke2021 wrote:keyboard-configuration dialog pop up, i click enter, script continue working...
few minutes later it pop up 2nd time, i click enter, script continue working...
few more minutes pop up 3rd time, this time after i hit enter i got error and script stop
If exactly the same dialogs popup 3 times then there's something very wrong, no idea, never seen that.
Try to find out what filesystem type your USB is, if it's other than a Linux filesystem (e.g. FAT) then it's NOT going to work as it should.
With gparted you can make a ext3 or ext4 filesystem somewhere, from there you can run the build.
Fred
Ah, ok, then problem could be not enough free space, needs at least 3gb (your savefile only 1gb as I understood).
Ok, now I've tried similar as you did, running ./mklive-bullseye64 from /root, in FossaPup with a 4gb savefile. (first time I did such a way, normally I build from a separate ext4 partition and works well)
I didn't get the error you got, but things went wrong at nearly the end of the build, don't know why, in theory it should work, but obviously it doesn't work building inside a savefile.
So my conclusion is that this way of building the system should be done on an actual filesystem (separate partition, e.g. ext3 or ext4 formatted), NOT from /root (or other location) in the Puppy "virtual" filesystem. I wish I could explain why with the details, but cannot, sorry.
EDIT: See next post, above seems not correct.
Fred
Hmm.. turned out that the first time I tried, FossaPup (v9.0.3) was in pupmode=13, which means that the changes are in RAM (and saved at shutdown or on demand) but I have only 2GB RAM so ran out of disk space at the end.
Now I rebooted (with another pupmode) and checked first that there's enough space in / (with my 4gb savefile it should be enough)
Code: Select all
root# df -h
Filesystem Size Used Avail Use% Mounted on
....
unionfs 3,9G 87M 3,8G 3% /
....So should be OK according to "df", ran the build from /root and all went well for me....
Fred
Same error even with new partition ext4 more than 6gb no savefile working about 40 minutes
Weird.... why it fails for you at the keyboard choice, too bad, all I can say, I'm out of ideas,
Fail. error processing package keyboard configuration.
my keyboard is french azerty
@Luke2021
Finally, I think, found what's the problem. I normally press "Enter" after making the keyboard layout choice (with up/down arrow keys).
Now I tried clicking Ok in the dialog with the mouse pointer (I guess you did that, right?) and got the same problem, indeed the dialog comes back 2 more times and finally the build fails.
So..., don't know real solution (that clicking Ok works) , but anyway I guess it should work fine for you when you press 'Enter' after making keyboard layout choice.
Btw, when I run the build from DebianDog, there's no problem, when clicking Ok with the mouse.
(the problem may have to do with a possibly incomplete gtk3 install in FossaPup, but that's just a guess).
Anyway, sorry for the inconvenience and thanks for reporting!
Fred
