Puppy Linux Discussion Forum

Posted: **Sat Oct 26, 2024 10:48 am**

Running Bookworm BookwormPup64 10.0.8 on two different versions of the circa 2015/16 Google Chromebox CN60 models. (One has the Intel I7) Everything works.

Boxes were placed into Dev-Mode, the internal old EOL chromeos wiped, and did not have to use the Mr. Chromebox firmware, just used the standard dev setup. Enabled USB boot (which also enables the SDcard to boot from too), and legacy-mode. Puppy rocks on these machines!

Code: Select all

# inxi -Fxz
System:    Host: puppyBOX1 Kernel: 6.1.106 x86_64 (64 bit) Desktop: JWM 2.4.3 Distro: BookwormPup64 10.0.8
Machine:   Device: desktop System: GOOGLE product: Panther v: 1.0
           Mobo: N/A model: N/A BIOS: coreboot v: N/A date: 10/03/2014
CPU:       Dual core Intel Celeron 2955U (-MCP-) cache: 2048 KB
           flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 5587
           clock speeds: max: 1400 MHz 1: 1197 MHz 2: 1197 MHz
Graphics:  Card: Intel Haswell-ULT Integrated Graphics Controller bus-ID: 00:02.0
           Display Server: X.org 1.21.1.7 drivers: modesetting (unloaded: fbdev,vesa)
           tty size: 113x32 Advanced Data: N/A for root
Audio:     Card-1 Intel 8 Series HD Audio Controller driver: snd_hda_intel bus-ID: 00:1b.0
           Card-2 Intel Haswell-ULT HD Audio Controller driver: snd_hda_intel bus-ID: 00:03.0
           Sound: Advanced Linux Sound Architecture v: k6.1.106
Network:   Card-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
           driver: r8169 port: 2000 bus-ID: 01:00.0
           IF: eth0 state: down mac: <filter>
           Card-2: Qualcomm Atheros AR9462 Wireless Network Adapter driver: ath9k bus-ID: 02:00.0
           IF: wlan0 state: up mac: <filter>
Drives:    HDD Total Size: 77.5GB (19.8% used)
           ID-1: /dev/sda model: KINGSTON_RBU size: 16.0GB
           ID-2: USB /dev/sdb model: SanDisk_3.2Gen1 size: 61.5GB
Partition: ID-1: / size: 6.9G used: 1.9G (28%) fs: overlay dev: N/A
           ID-2: swap-1 size: 8.06GB used: 0.00GB (0%) fs: swap dev: /dev/zram0
Sensors:   None detected - is lm-sensors installed and configured?
Info:      Processes: 138 Uptime: 3:08 Memory: 1815.8/7872.9MB Init: SysVinit runlevel: 5 Gcc sys: 12.2.0
           Client: Shell (bash 5.2.151) inxi: 2.3.8

Posted: **Sun Oct 27, 2024 3:29 am**

Questions

Is your pipewire audio working on this platform?
Are you able to connect it to a TV over HDMI as the end-device for video?
is the audio over HDMI via its end-device's speakers?

In the past, I have run Chrome Flex without issues over HDMI on an out-of-support Chromebox. Last I checked with its owner, the ChromeOS updates are continuing.

Curious

Puppy Linux Discussion Forum

ChromeBox CN60 - bookwormpup64 10.0.8 works fine

ChromeBox CN60 - bookwormpup64 10.0.8 works fine

Re: ChromeBox CN60 - bookwormpup64 10.0.8 works fine