Puppy Linux Discussion Forum

01micko released slacko64-8.2.1-alpha-alpha-beta+0 on May 30, 2021

more information and discussions: viewtopic.php?f=118&t=2893

download slacko64-8.2.1.iso: http://01micko.com/woof-output-slacko64 ... -8.2.1.iso

I have created 4 half-Chinese language pets for slacko64-8.2.1:

fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-21.1.4.pet (17 mb)

ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.1.4.pet (32 mb)

scim Chinese input platform: scim64_1.4.9-en-zh-bionic-21.1.4.pet (13 mb)

yong Chinese input platform: yong3264_20201122-en-zh-bionic-21.1.4.pet (9 mb)

Plus 2 Chinese language pets each for slacko64-8.2.1:
Simplified Chinese: slacko64-8.2.1-zhcn-21.1.4.pet (3 mb)

Traditional Chinese: slacko64-8.2.1-zhhk-21.1.4.pet (3 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in slacko64-8.2.1

(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pet) or Traditional Chinese (use zhhk pet) desktop menus, icon labels, tooltips for slacko64-8.2.1. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

For more information about the fcitx, ibus, scim and yong half-Chinese language pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

fredx181 released a number of FossaDog systems based on ubuntu and the latest update was on Nov 15, 2020

for more
information and discussions: viewtopic.php?t=478

download FossaDog-2020-11-15_64-bit-UEFI.iso: https://github.com/DebianDog/FossaDog/r ... t-UEFI.iso

I have created 1 half-Chinese language deb for FossaDog64-2020-11-15:

fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-121.1.4.deb (14 mb)

Plus 2 Chinese language debs for FossaDog64-2020-11-15:
Simplified Chinese: fossadog64-20201115-zhcn-121.1.4.deb (4 mb)

Traditional Chinese: fossadog64-20201115-zhhk-121.1.4.deb (3 mb)

To use:
(a) the half-Chinese language deb will enable you to display and input Chinese in FossaDog64-2020-11-15

(b) the name+version corresponding Chinese language debs will give you Simplified Chinese (zhcn deb) or Traditional Chinese (zhhk deb) menus, icon labels, tooltips for FossaDog64-2020-11-15. Please note that all Chinese language debs rely on a suitable half-Chinese language deb already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

for more information about the fcitx deb, please see the first posting of this subject (same as for fcitx pets)

Download addresses for these half-Chinese and Chinese language debs are also available in the first posting of this subject.

fredx181 released a DebianDog 64 and 32 bit mklive-chimaera system download script on May 29, 2021

for more information and discussions: viewtopic.php?f=46&t=3071&start=3

download script to download chimaera (20210529) iso from source depository:
mklive-chimaera.gz: download/file.php?id=4211

Using the mklive-bullseye script （updated to May 29, 2021）, I first created 2 debiandog chimaera systems (1 each for 64 and 32 bit) with the obdog desktop option. Then I created half-Chinese and Chinese language debs for these 2 systems.

I have created the following Half-Chinese debs each for debiandog chimaera (20210529) obdog desktop 64 and 32 bit systems:

64 bit:
fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-121.1.5.deb (14 mb)

yong Chinese input platform: yong64_20201122-en-zh-bionic-121.1.5.deb (7 mb)

32 bit:
fcitx Chinese input platform: fcitx_4.2.9-en-zh-bionic-120.1.6.deb (18 mb)

Plus 2 Chinese language pets each for debiandog chimaera (20210529) obdog desktop 64 and 32 bit systems:
Simplified Chinese:
64 bit:　DD64_chimaera-obdog20210529-zhcn-121.1.5.deb (3 mb)
32 bit:　DD32_chimaera-obdog20210529-zhcn-120.1.6.deb (3 mb)

Traditional Chinese:
64 bit:　DD64_chimaera-obdog20210529-zhhk-121.1.5.deb (2 mb)
32 bit:　DD32_chimaera-obdog20210529-zhhk-120.1.6.deb (2 mb)

To use:
(a) any 1 of the half-Chinese languages pet will enable you to display and input Chinese in debiandog chimaera (20210529) obdog desktop 64 bit (use the fcitx64 or yong64 121.1.5 deb) and 32 bit (use the fcitx 120.1.6 deb) systems

(b) the name+version corresponding Chinese language pets will give you Simplified Chinese (zhcn deb) or Traditional Chinese (zhhk deb) menus, icon labels, tooltips for debiandog chimaera (20210529) obdog desktop 64 and 32 bit systems. Please note that all Chinese language debs rely on a suitable half-Chinese language deb already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).
Also note that because jwm has unresolved localization issues, the start jwm desktop option was disabled in the Chinese language debs.

for more information about the fcitx and yong debs, please see the first posting of this subject (same as fcitx pets)

Download addresses for these half-Chinese and Chinese language debs are also available in the first posting of this subject.

fredx181 released a number of DebianDog 64 and 32 bit mklive-bullseye system download script, the latest was released on May 23, 2021

for more information and discussions: viewtopic.php?f=46&t=1857

download script to download bullseye (20210523) iso from source depository:
mklive-bullseye: viewtopic.php?p=26114#p26114

Using the mklive-bullseye script, I first created 2 debiandog bullseye systems (1 each for 64 and 32 bit) with the openbox desktop option. Then I created half-Chinese and Chinese language debs for these 2 systems.

I have created 2 Half-Chinese debs each for debiandog bullseye (20210523) openbox desktop 64 and 32 bit systems:
64 bit:
fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-121.1.5.deb (14 mb)

yong Chinese input platform: yong64_20201122-en-zh-bionic-121.1.5.deb (7 mb)

32 bit:
fcitx Chinese input platform: fcitx_4.2.9-en-zh-bionic-120.1.5.deb (18 mb)

yong Chinese input platform: yong32_20201122-en-zh-bionic-120.1.5.deb (7 mb)

Plus 2 Chinese language debs each for debiandog bullseye (20210523) openbox desktop 64 and 32 bit systems:
Simplified Chinese:
64 bit:　DD64_bullseye-openbox20210523-zhcn-121.1.5.deb (3 mb)
32 bit:　DD32_bullseye-openbox20210523-zhcn-120.1.5.deb (3 mb)

Traditional Chinese:
64 bit:　DD64_bullseye-openbox20210523-zhhk-121.1.5.deb (2 mb)
32 bit:　DD32_bullseye-openbox20210523-zhhk-120.1.5.deb (2 mb)

To use:
(a) any 1 of the 2 half-Chinese language deb will enable you to display and input Chinese in debiandog bullseye (20210523) openbox desktop 64 bit (use the 121.1.5 debs) and 32 bit (use the 120.1.5 deb)

(b) the name+version corresponding Chinese language pets will give you Simplified Chinese (zhcn deb) or Traditional Chinese (zhhk deb) menus, icon labels, tooltips for debiandog bullseye (20210523) openbox desktop 64 and 32 bit systems. Please note that all Chinese language debs rely on a suitable half-Chinese language deb already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

for more information about the fcitx and yong debs, please see the first posting of this subject （same as for fcitx and yong pets）

Download addresses for these half-Chinese and Chinese language debs are also available in the first posting of this subject.

fredx181 released a number of DebianDog 64 and 32 bit Sid system on Sep 24, 2020, including full and basic

for more information, discussions and download
DebianDog-Sid-full-20201125-overlay_amd64-UEFI.iso and
DebianDog-Sid-full-20201125-overlay_i386-pae-UEFI.iso：
https://github.com/DebianDog/Sid#debiandog-sid

I have created the following Half-Chinese debs each for debiandog sid (20201125) full 64 and 32 bit systems:

64 bit:
fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-121.1.5.deb (14 mb)

yong Chinese input platform: yong64_20201122-en-zh-bionic-121.1.5.deb (7 mb)

32 bit:
fcitx Chinese input platform: fcitx_4.2.9-en-zh-bionic-120.1.6.deb (18 mb)

Plus 2 Chinese language debs each for debiandog sid (20201125) full 64 and 32 bit systems:
Simplified Chinese:
64 bit:　DD64_sid-full20201125-zhcn-121.1.5.deb (3 mb)
32 bit:　DD32_sid-full20201125-zhcn-120.1.6.deb (3 mb)

Traditional Chinese:
64 bit:　DD64_sid-full20201125-zhhk-121.1.5.deb (2 mb)
32 bit:　DD32_sid-full20201125-zhhk-120.1.6.deb (2 mb)

To use:
(a) any 1 of the half-Chinese language deb will enable you to display and input Chinese in debiandog sid (20201125) full 64 bit (use the 121.1.5 debs) and 32 bit (use the 120.1.6 deb) systems

(b) the name+version corresponding Chinese language debs will give you Simplified Chinese (zhcn deb) or Traditional Chinese (zhhk deb) menus, icon labels, tooltips for debiandog sid (20201125) full 64 and 32 bit systems. Please note that all Chinese language debs rely on a suitable half-Chinese language deb already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).
Also note that because jwm has unresolved localization issues, the start jwm desktop option was disabled in the Chinese language debs.

for more information about the fcitx and yong debs, please see the first posting of this subject (same as for the fcitx and yong pets)

Download addresses for these half-Chinese and Chinese language debs are also available in the first posting of this subject.

The simplicity team released a number of simplicity systems:
version 20.1 (Desktop20-1.iso; Gaming20-1.iso and Mini20-1.iso) on Feb 4, 2020; version 20.4 (X204.iso; Gaming204.iso; Desktop204.iso and Mini204.iso) on Apr 30, 2020; version 207Alpha (X207AlphaFinal.iso, MiniAlpha207.iso, Desktop207AlphaFinal.iso and Gaming207Alpha.iso) on May 26, 2021

Simplicity Linux is based on Buster Dog (https://debiandog.github.io/doglinux/zz03busterdog.html) and use Cinnamon Window Manager. It comes in 3 to 4 editions: Mini, Desktop, Gaming and X. Mini has minimum setup and rely on cloud based software, Gaming appeals to gamers; Desktop includes the most number of softwares and X is an experimental release to include new softwares being tested for future releases

for more information and discussions:
https://linuxtracker.org/index.php?page ... a769edddcf
https://distrowatch.com/table.php?distr ... simplicity

download Gamer20-1.iso, Gaming204.iso and Gaming207Alpha.iso:
https://sourceforge.net/projects/simplicitylinux/files/

I have created 3 half-Chinese language deb each for the Gaming 20.1, 20.4 and 20.7Alpha systems:

Gaming20-1 and 20-4:
fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-121.0.1.deb (14 mb)

ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-121.0.1.deb (25 mb)

yong Chinese input platform: yong64_20201122-en-zh-bionic-121.0.1.deb (7 mb)

Gaming207Alpha:
fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-121.1.7.deb (14 mb)

ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-121.1.7.deb (31 mb)

yong Chinese input platform: yong64_20201122-en-zh-bionic-121.1.7.deb (7 mb)

Plus 2 Chinese language debs each for Gaming 20.1, 20.4 and 20.7Alpha systems:
Simplified Chinese:
gaming64_201-zhcn-121.0.1.deb (4 mb)
gaming64_204-zhcn-121.0.1.deb (4 mb)
gaming64_207alpha-zhcn-121.1.7.deb (4 mb)

Traditional Chinese:
gaming64_201-zhhk-121.0.1.deb (3 mb)
gaming64_204-zhhk-121.0.1.deb (3 mb)
gaming64_207alpha-zhhk-121.1.7.deb (3 mb)

To use:
(a) the half-Chinese language deb will enable you to display and input Chinese in Gaming 20.1 + 20.4 (please use the 121.0.1 debs) and 20.7Alpha (please use the 121.1.7 debs) systems

(b) the name+version corresponding Chinese language debs will give you Simplified Chinese (zhcn deb) or Traditional Chinese (zhhk deb) menus, icon labels, tooltips for Gaming 20.1, 20.4 and 20.7Alpha systems. Please note that all Chinese language debs rely on a suitable half-Chinese language deb already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

for more information about the fcitx, ibus and yong debs, please see the first posting of this subject (same as for fcitx, ibus and yong pets)

Download addresses for these half-Chinese and Chinese language debs are also available in the first posting of this subject.

BarryK has recently released EasyOS Dunfell-series 2.8.1 (Jun 10, 2021)

more information, annoucement notes and download addresses for easy-2.8.1-amd64.img.gz:
viewtopic.php?f=63&t=3200

I have created 4 half-Chinese language pets each for easydunfell 2.8.1:
fcitx Chinese input platform:
fcitx64_4.2.9-en-zh-bionic-21.1.5.pet (14 mb)

ibus Chinese input platform:
ibus64_1.5.19-en-zh-bionic-21.1.5.pet (31 mb)

scim Chinese input platform:
scim64_1.4.18-en-zh-bionic-21.1.5.pet (11 mb)

yong Chinese input platform:
yong3264_20201122-en-zh-bionic-21.1.5.pet (8 mb)

Plus 2 Chinese language pets each for easydunfell 2.8.1:
Simplified Chinese:
easydunfell-2.8.1-zhcn-21.1.5.pet (4 mb)

Traditional Chinese:
easydunfell-2.8.1-zhhk-21.1.5.pet (4 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in easydunfell 2.8.1

(b) the 2 name corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for easydunfell 2.8.1. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

more information about the fcitx, ibus, scim and yong pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

mistfire has recently released QuickPup64 21.06 beta (Jun 8, 2021) and 21.06 beta2 (Jun 12, 2021)

More information and forum discussions:
viewtopic.php?f=33&t=3171

Download quickpup64_21.06-beta.iso and quickpup64_21.06-beta-2.iso：
https://drive.google.com/file/d/1t_KJpA ... sp=sharing

I have created 4 half-Chinese language pets for QuickPup 21.06 beta and beta2:

fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-21.1.6.pet (14 mb)

ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.1.6.pet (33 mb)

scim Chinese input platform: scim64_1.4.18-en-zh-bionic-21.1.6.pet (16 mb)

yong Chinese input platform: yong3264_20201122-en-zh-bionic-21.1.6.pet (8 mb)

Plus 4 Chinese language pets each for QuickPup64 21.06beta and beta2:
Simplified Chinese:
quickpup64-21.06beta-zhcn-21.1.6.pet (3 mb)
quickpup64-21.06beta2-zhcn-21.1.6.pet (3 mb)
quickpup

Traditional Chinese:
quickpup64-21.06beta-zhhk-21.1.6.pet (3 mb)
quickpup64-21.06beta2-zhhk-21.1.6.pet (3 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in QuickPup64 21.06beta and beta2

(b) the name corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for QuickPup64 21.06beta and beta2. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

for more information about the fcitx, ibus, scim and yong half-Chinese pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

rcrsn51 released DebLive_Bullseye-amd64-6.iso on May 27, 2021

for more
information and discussions:
viewtopic.php?f=46&t=644
https://www.mediafire.com/file/opv0yqwt ... 6.iso/file

download DebLive_Bullseye-amd64-6.iso:
https://download1592.mediafire.com/czez ... md64-6.iso
https://github.com/DebianDog/MakeLive/r ... md64-6.iso

I have created 2 half-Chinese language deb for DebLive_Bullseye-amd64-6.iso:

fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-121.1.7.deb (14 mb)

yong Chinese input platform: yong64_20201122-en-zh-bionic-121.1.7.deb (7 mb)

Plus 2 Chinese language debs for DebLive_Bullseye-amd64-6.iso:
Simplified Chinese: DL64_bullseye-6-zhcn-121.1.7.deb (3 mb)

Traditional Chinese: DL64_bullseye-6-zhhk-121.1.7.deb (2 mb)

To use:
(a) any 1 of the 2 half-Chinese language deb will enable you to display and input Chinese in DebLive_Bullseye-amd64-6.iso

(b) the name+version corresponding Chinese language debs will give you Simplified Chinese (zhcn deb) or Traditional Chinese (zhhk deb) menus, icon labels, tooltips for DebLive_Bullseye-amd64-6.iso. Please note that all Chinese language debs rely on a suitable half-Chinese language deb already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

for more information about the fcitx and yong debs, please see the first posting of this subject （same as for the fcitx and yong pets）

Download addresses for these half-Chinese and Chinese language debs are also available in the first posting of this subject.

fredx181 announced BionicDog64-Cinnamon-ETP_2018-08-27.iso (created by ETP with modifications from fredx181) on Aug 27, 2018.

for more information and discussions:
https://oldforum.puppylinux.com/viewtop ... 5#p1003063
https://oldforum.puppylinux.com/viewtop ... 4&t=113210

download BionicDog64-Cinnamon-ETP_2018-08-27.iso: https://github.com/fredx181/bionicdog/r ... -08-27.iso

I have created 2 half-Chinese language deb for BionicDog64-Cinnamon-ETP_2018-08-27.iso:

fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-121.1.7.deb (14 mb)

yong Chinese input platform: yong64_20201122-en-zh-bionic-121.1.7.deb (7 mb)

Plus 2 Chinese language debs for BionicDog64-Cinnamon-ETP_2018-08-27.iso:
Simplified Chinese: BD64_cinnamon-ETP20180827-zhcn-121.1.7.deb (4 mb)

Traditional Chinese: BD64_cinnamon-ETP20180827-zhhk-121.1.7.deb (4 mb)

To use:
(a) any 1 of the 2 half-Chinese language deb will enable you to display and input Chinese in BionicDog64-Cinnamon-ETP_2018-08-27.iso

(b) the name+version corresponding Chinese language debs will give you Simplified Chinese (zhcn deb) or Traditional Chinese (zhhk deb) menus, icon labels, tooltips for BionicDog64-Cinnamon-ETP_2018-08-27.iso. Please note that all Chinese language debs rely on a suitable half-Chinese language deb already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

for more information about the fcitx and yong debs, please see the first posting of this subject （same as for the fcitx and yong pets）

Download addresses for these half-Chinese and Chinese language debs are also available in the first posting of this subject.

fredx181 released an updated BionicDog 64 and 32 bit on Jun 4, 2018

for more information and discussions:
https://oldforum.puppylinux.com/viewtopic.php?t=113210
https://debiandog.github.io/doglinux/

download iso:
BionicDog32_2018-06-04.iso: https://github.com/fredx181/bionicdog/r ... -06-04.iso
BionicDog64_2018-06-04.iso: https://github.com/fredx181/bionicdog/r ... -06-04.iso

I have created the following Half-Chinese debs for BionicDog (20180604) 64 and 32 bit systems:

64 bit:
fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-121.1.7.deb (14 mb)

yong Chinese input platform: yong64_20201122-en-zh-bionic-121.1.7.deb (7 mb)

32 bit:
fcitx Chinese input platform: fcitx_4.2.9-en-zh-bionic-120.1.7.deb (18 mb)

Plus 2 Chinese language pets each for BionicDog (20180604) 64 and 32 bit systems:
Simplified Chinese:
64 bit:　BD64-20180604-zhcn-121.1.7.deb (3 mb)
32 bit:　BD32-20180604-zhcn-120.1.7.deb (3 mb)

Traditional Chinese:
64 bit:　BD64-20180604-zhhk-121.1.7.deb (2 mb)
32 bit:　BD32-20180604-zhhk-120.1.7.deb (2 mb)

To use:
(a) any 1 of the half-Chinese languages pet will enable you to display and input Chinese in BionicDog (20180604) 64 bit (use the fcitx64 or yong64 121.1.7 debs) and 32 bit (use the fcitx 120.1.7 deb) systems

(b) the name+version corresponding Chinese language pets will give you Simplified Chinese (zhcn deb) or Traditional Chinese (zhhk deb) menus, icon labels, tooltips for BionicDog (20180604) 64 and 32 bit systems. Please note that all Chinese language debs rely on a suitable half-Chinese language deb already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).
Also note that because jwm has unresolved localization issues, the start jwm desktop option was disabled in the Chinese language debs.

for more information about the fcitx and yong debs, please see the first posting of this subject（same as for the fcitx and yong pets）

Download addresses for these half-Chinese and Chinese language debs are also available in the first posting of this subject.

icake wrote: Tue Sep 01, 2020 6:18 am

Further to the release of easy os buster 2.3.2, updated versions 2.3.3 and 2.3.8 were released

more information, annoucement notes and download addresses:
easyos http://www.murga-linux.com/puppy/viewtopic.php?t=109958
easypup [url]http://www.murga-l inux.com/puppy/viewtopic.php?t=118021[/url]

I have created 6 half-Chinese language pets each for easy os buster 2.3.3 to 2.3.8:
fcitx Chinese input platform:
fcitx64_4.2.7-en-zh-xenial-16.1.3s.pet (21.6 mb)

scim Chinese input platform:
scim64_1.4.9-en-zh-xenial-16.1.3s.pet (18.1 mb)

yong Chinese input platform:
yong3264_4.2.0-en-zh-xenial-16.1.3s.pet (8.6 mb)
yong3264_th_2016.11.5-en-zh-xenial-16.1.3s.pet (7.9 mb)
yong3264_thjj_2016.7.29-en-zh-xenial-16.1.3s.pet (8.4 mb)
yong3264_thth_2014.8.5-en-zh-xenial-16.1.3s.pet (9.5 mb)

Plus 2 Chinese language pets each for easy buster 2.3.3 to 2.3.8:
Simplified Chinese:
easyos-2.3.3-zhcn-16.1.3s.pet (3.0 mb)
easyos-2.3.8-zhcn-16.1.3s.pet (3.0 mb)
easypup-2.3.3-zhcn-16.1.3s.pet (3.0 mb)

Traditional Chinese:
easyos-2.3.3-zhhk-16.1.3s.pet (2.5 mb)
easyos-2.3.8-zhhk-16.1.3s.pet (2.5 mb)
easypup-2.3.3-zhhk-16.1.3s.pet (2.5 mb)

To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in easy buster 2.3.3 to 2.3.8

(b) the 2 name corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for easy buster 2.2.3 to 2.3.8

more information about the fcitx64 4.2.7 pet, please see postings dated Feb 4 and 12, 2015 on page 15 of this subject
more information about the scim64 1.4.9 pet, please see postings dated Feb 6 and 13, 2015 on page 15 of this subject
more information about the yong pets, please see posting dated Dec 31, 2016 on page 25 of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

hi, i have tested your latest fcitx-xenial.pet for easyos dunfell2.8.4 and buster easyos 2.6.2.i can install fcitx successfully,but it didnt work well.here is the results as the following:
1.i ran it as root,not all apps cant accept it's input ,like seamonky.
2.the fcitx didnt work with any app as spot ,and any app running in a container.Instead, you fcitx.pet works perfectly in fossapup and works well across all apps runing as any user.

Hopefully,you can fix it as soon as possible if you are available,Thanks in advance

Thanks for the information.

I have tested easydunfell 2.8.4 with the Chinese pets and here are the findings:

1. yong (yong3264_20201122-en-zh-bionic-21.1.5.pet) can run in seamonkey and input Chinese

2. fcitx, ibus and scim (version 21.1.5.pet) cannot run in seamonkey. I have tried to fix the seamonkey cannot input Chinese issue and there are still unsolved issues. The temporary fix is to use alternative browsers. I have tested and found light and palemoon browsers can run and input Chinese in easydunfell 2.8.4.

I have never run easydunfell as spot. Please test using yong instead of fcitx and see if you can input Chinese.

Let me know if you have any further questions.

icake wrote: Tue Jul 27, 2021 8:25 am

Thanks for the information.

I have tested easydunfell 2.8.4 with the Chinese pets and here are the findings:

1. yong (yong3264_20201122-en-zh-bionic-21.1.5.pet) can run in seamonkey and input Chinese

2. fcitx, ibus and scim (version 21.1.5.pet) cannot run in seamonkey. I have tried to fix the seamonkey cannot input Chinese issue and there are still unsolved issues. The temporary fix is to use alternative browsers. I have tested and found light and palemoon browsers can run and input Chinese in easydunfell 2.8.4.

I have never run easydunfell as spot. Please test using yong instead of fcitx and see if you can input Chinese.

Let me know if you have any further questions.

ihave tested yong3264_20201122-en-zh-bionic-21.1.5.pet for easydunfell 2.8.4
It worked well with the apps(i have tested some basic apps like editror office browser terminal and etc) running as root or spot,but it couldn't work with the geany editor running as spot.
For the apps running in a container,it didn'work.
I didnt find yong (and fcitx) from the menu.And i couldnt find it from package manager ,which means i wouldnot know how to remove it if it didn't work

peebee released UPupHH+D-21.04+5 on Jun 24, 2021

more inoformation: viewtopic.php?f=144&t=2736

download UpupHH+D-21.04+5.iso: http://distro.ibiblio.org/puppylinux/pu ... -21.04.htm

I have created 4 half-Chinese language pets each for UPupHH+D-21.04.05:

fcitx Chinese input platform: fcitx_4.2.7-en-zh-bionic-14.3.6.pet (16 mb)

ibus Chinese input platform: ibus_1.5.17-en-zh-bionic-14.3.6.pet (28 mb)

scim Chinese input platform: scim_1.4.14-en-zh-bionic-14.3.6.pet (20 mb)

yong Chinese input platform: yong3264_20201122-en-zh-bionic-14.3.6.pet (8 mb)

Plus 2 Chinese language pets each for UPupHH+D-21.04+5:
Simplified Chinese:
upuphhD-21.04.05-zhcn-14.3.6.pet (2 mb)

Traditional Chinese:
upuphhD-21.04.05-zhhk-14.3.6.pet (2 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in UPupHH+D-21.04.05

(b) the name+version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for UPupHH+D-21.04.05. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

for more information about the fcitx, ibus, scim and yong pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

peebee released arch32pup-20.05+5 and arch64pup-20.05+5 on Jun 27, 2021

more information : viewtopic.php?f=7&t=124&start=160

download:
Arch64Pup-20.05+5: http://www.smokey01.com/peebee/downloads/a64pup/
Arch32Pup-20.05+5: http://www.smokey01.com/peebee/downloads/a32pup/

I have created 3 half-Chinese language pets each for arch64 20.05.05 and arch32 20.05.05:
fcitx Chinese input platform:
arch64 20.05.05: fcitx64_4.2.7-en-zh-raring-14.0.6.pet (14 mb)
arch32 20.05.05: fcitx_4.2.７-en-zh-raring-14.3.7.pet (16 mb)

(I cannot get ibus to run in arch64 20.05.05 or arch32 20.05.05)

scim Chinese input platform:
arch64 20.05.05: scim64_1.4.14-en-zh-raring-14.0.6.pet (13 mb)
arch32 20.05.05: scim_1.4.14-en-zh-raring-14.3.7.pet (14 mb)

yong Chinese input platform:
arch64 20.05.05: yong3264_20201122-en-zh-raring-14.0.6.pet (9 mb)
arch32 20.05.05: yong3264_20201122-en-zh-raring-14.3.7.pet (9 mb)

Plus 2 Chinese language pets each for arch64 20.05.05 and arch32 20.05.05:
Simplified Chinese:
arch64:
arch64-20.05.05-zhcn-14.0.6.pet (2 mb)

arch32:
arch32-20.05.05-zhcn-14.3.7.pet (2 mb)

Traditional Chinese:
arch64:
arch64-20.05.05-zhhk-14.0.6.pet (2 mb)

arch32:
arch32-20.05.05-zhhk-14.3.7.pet (1 mb)

To use:
(a) any 1 of the 3 half-Chinese language pets will enable you to display and input Chinese in arch64 20.05.05 （use 14.0.6 pets） and arch32 20.05.05 （use 14.3.7 pets）

(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for arch64 20.05.05 and arch32 20.05.5. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

For more information about the fcitx, scim and yong half-Chinese language pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

BarryK has recently released EasyOS Dunfell-series 2.8.3 (Jun 28, 2021) and 2.8.4 (July 2, 2021)

more information, annoucement notes and download addresses:
easy-2.8.3-amd64.img.gz:
viewtopic.php?f=63&t=3327
https://bkhome.org/news/202106/easyos-283-released.html
easy-2.8.4-amd64.img.gz:
https://bkhome.org/news/202107/easyos-d ... eased.html
http://distro.ibiblio.org/easyos/amd64/ ... ell/2.8.4/

I have created 4 half-Chinese language pets each for easydunfell 2.8.3 and 2.8.4:
fcitx Chinese input platform:
fcitx64_4.2.9-en-zh-bionic-21.1.5.pet (14 mb)

ibus Chinese input platform:
ibus64_1.5.19-en-zh-bionic-21.1.5.pet (31 mb)

scim Chinese input platform:
scim64_1.4.18-en-zh-bionic-21.1.5.pet (11 mb)

yong Chinese input platform:
yong3264_20201122-en-zh-bionic-21.1.5.pet (8 mb)

Please note that only yong Chinese input platform can input Chinese in Libreoffice 7 and seamonkey browser that comes with easyos dunfell 2.8.3 and 2.8.4. If you want to run a browser with fcitx, ibus or scim, please try light and palemoon (28.4.0).

Plus 2 Chinese language pets each for easydunfell 2.8.3 and 2.8.4:
Simplified Chinese:
easydunfell-2.8.3-zhcn-21.1.5.pet (4 mb)
easydunfell-2.8.4-zhcn-21.1.5.pet (4 mb)

Traditional Chinese:
easydunfell-2.8.3-zhhk-21.1.5.pet (4 mb)
easydunfell-2.8.4-zhhk-21.1.5.pet (4 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in easydunfell 2.8.3 and 2.8.4

(b) the 2 name corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for easydunfell 2.8.3 and 2.8.4. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

more information about the fcitx, ibus, scim and yong pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

Further to the release of easy os 2.6.1, updated version 2.6.2 was released on Jun 29, 2021

more information, annoucement notes and download addresses:
viewtopic.php?f=63&t=2029
https://bkhome.org/news/202106/easyos-b ... 2-eol.html

I have created 4 half-Chinese language pets each for easy os 2.6.2:
fcitx Chinese input platform:
fcitx64_4.2.9-en-zh-bionic-21.0.0.pet (17 mb)

ibus Chinese input platform:
ibus64_1.5.19-en-zh-bionic-21.0.0.pet (24 mb)

scim Chinese input platform:
scim64_1.4.18-en-zh-bionic-21.0.0.pet (12 mb)

yong Chinese input platform:
yong3264_20201122-en-zh-bionic-21.0.0.pet (8 mb)

Please note that only yong Chinese input platform can input Chinese in seamonkey browser that comes with easyos 2.6.2. If you want to run a browser with fcitx, ibus or scim, please try light and palemoon (28.4.0).

Plus 2 Chinese language pets for easyos 2.6.2:
Simplified Chinese:
easyos-2.6.2-zhcn-21.0.0.pet (3 mb)

Traditional Chinese:
easyos-2.6.2-zhhk-21.0.0.pet (3 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in easyos 2.6.2

(b) the 2 name corresponding Chinese language pets will give you Simplified Chinese (use the zhcn pet) or Traditional Chinese (use the zhhk pet) deaktop menus, icon labels, tooltips for easyos 2.6.2. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

more information about the fcitx64, ibus64, scim64 and yong3264 pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

taersh released artstudio64 xfce 1.0.0 on 2021-01-23

more information: viewtopic.php?f=110&t=1046

download ArtStudio64 XFCE 2021-01-23 : https://archive.org/download/ArtStudioX ... tem.tar.gz

I have created 4 half-Chinese language pets each for ArtStudio64 XFCE 1.0.0 (2021-01-23):
fcitx Chinese input platform:
fcitx64_4.2.9-en-zh-bionic-21.0.0b.pet (15 mb)

ibus Chinese input platform:
ibus64_1.5.19-en-zh-bionic-21.0.0b.pet (25 mb)

scim Chinese input platform:
scim64_1.4.18-en-zh-bionic-21.0.0b.pet (12 mb)

yong Chinese input platform:
yong3264_20201122-en-zh-bionic-21.0.0b.pet (8 mb)

Plus 2 Chinese language pets each for ArtStudio64 XFCE 1.0.0 (2021-01-23):
Simplified Chinese:
artstudiox64-1.0.0-zhcn-21.0.0b.pet (4 mb)

Traditional Chinese:
artstudiox64-1.0.0-zhhk-21.0.0b.pet (3 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in ArtStudio64 XFCE 1.0.0 (2021-01-23)

(b) the 2 name corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for ArtStudio64 XFCE 1.0.0 (2021-01-23). Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

more information about the fcitx, ibus, scim and yong pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

peebee has released BionicPup32 8.0.28 on Jul 18, 2021

More information and forum discussions: viewtopic.php?f=115&start=165

Download: http://distro.ibiblio.org/puppylinux/pu ... cpup32.htm

I have created 4 half-Chinese language pets for BionicPup32 8.0.28:

fcitx Chinese input platform: fcitx_4.2.9-en-zh-bionic-20.0.1.pet (17 mb)

ibus Chinese input platform: ibus_1.5.7-en-zh-bionic-20.0.1.pet (29 mb)

scim Chinese input platform: scim_1.4.14-en-zh-bionic-20.0.1.pet (16 mb)

yong Chinese input platform: yong3264_20201122-en-zh-bionic-20.0.1.pet (8 mb)

Plus 2 Chinese language pets each for BionicPup32 8.0.28:
Simplified Chinese: bionicpup32-8.0.28-zhcn-20.0.1.pet (4 mb)

Traditional Chinese: bionicpup32-8.0.28-zhhk-20.0.1.pet (4 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in BionicPup32 8.0.28

(b) the Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for BionicPup32 8.0.28. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

for more information about the fcitx, ibus, scim and yong half-Chinese pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

helloworld wrote: Tue Jul 27, 2021 1:36 pm

ihave tested yong3264_20201122-en-zh-bionic-21.1.5.pet for easydunfell 2.8.4
.......
I didnt find yong (and fcitx) from the menu.And i couldnt find it from package manager ,which means i wouldnot know how to remove it if it didn't work

The reason why you cannot find the icake pets in the easydunfell 2.8.4 system after installing is because the easydunfell 2.8.4 package manager does not recognize "third party" pets including icake Chinese language pets.
All recent icake puppy Chinese pets were done with an unistall script included which allows the user to remove the pets after installed.

For systems that do not recognize icake pets, to remove the installed icake pets:
find the program "puninstall.sh" in /, open terminal and run this script by typing ./puninstall.sh; then press enter.

Let me know if you have further questions.

icake wrote: Sun Aug 01, 2021 3:40 am

Further to the release of easy os 2.6.1, updated version 2.6.2 was released on Jun 29, 2021

more information, annoucement notes and download addresses:
viewtopic.php?f=63&t=2029
https://bkhome.org/news/202106/easyos-b ... 2-eol.html

I have created 4 half-Chinese language pets each for easy os 2.6.2:
fcitx Chinese input platform:
fcitx64_4.2.9-en-zh-bionic-21.0.0.pet (17 mb)

ibus Chinese input platform:
ibus64_1.5.19-en-zh-bionic-21.0.0.pet (24 mb)

scim Chinese input platform:
scim64_1.4.18-en-zh-bionic-21.0.0.pet (12 mb)

yong Chinese input platform:
yong3264_20201122-en-zh-bionic-21.0.0.pet (8 mb)

Please note that only yong Chinese input platform can input Chinese in seamonkey browser that comes with easyos 2.6.2. If you want to run a browser with fcitx, ibus or scim, please try light and palemoon (28.4.0).

Plus 2 Chinese language pets for easyos 2.6.2:
Simplified Chinese:
easyos-2.6.2-zhcn-21.0.0.pet (3 mb)

Traditional Chinese:
easyos-2.6.2-zhhk-21.0.0.pet (3 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in easyos 2.6.2

(b) the 2 name corresponding Chinese language pets will give you Simplified Chinese (use the zhcn pet) or Traditional Chinese (use the zhhk pet) deaktop menus, icon labels, tooltips for easyos 2.6.2. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

more information about the fcitx64, ibus64, scim64 and yong3264 pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

Is yong3264_20201122-en-zh-bionic-21.0.0.pet the best for easyos 2.6.2 ?Cause i saw more yong.pets with higher version number(>21.0.0).Should i try them?

helloworld wrote: Sun Aug 01, 2021 2:05 pm

Is yong3264_20201122-en-zh-bionic-21.0.0.pet the best for easyos 2.6.2 ?Cause i saw more yong.pets with higher version number(>21.0.0).Should i try them?

icake Chinese language pets version 21.0.0 were created to run and provide Chinese language support to easyos 2.6.2. Therefore it is recommended to use yong3264_20201122-en-zh-bionic-21.0.0.pet for easyos 2.6.2. Higher version numbers of yong pets were created later to handle other Puppy systems. Pets having a higher version number means that they were created later but does not imply that they are better. Depending on the difference between the specific Puppy system and easyos 2.6.2, higher version icake pets created to handle another Puppy system might work (when the changes are minimal) or might not work (when the changes are critical) for easyos 2.6.2.

peebee released UPupFF+D-20.12+7 on Jun 24, 2021 and UPupFF+D-20.12+8 on Jul 24, 2021

More information: viewtopic.php?f=144&t=405&start=54

download iso: https://sourceforge.net/p/zestypup/acti ... 52223a6932

I have created 4 half-Chinese language pets each for UPupFF+D-20.12+7 and +8:

fcitx Chinese input platform: fcitx_4.2.9-en-zh-bionic-20.0.0s.pet (16 mb)

ibus Chinese input platform: ibus_1.5.17-en-zh-bionic-20.0.0s.pet (28 mb)

scim Chinese input platform: scim_1.4.14-en-zh-bionic-20.0.0s.pet (20 mb)

yong Chinese input platform: yong3264_20201122-en-zh-bionic-20.0.0s.pet (8 mb)

Plus 2 Chinese language pets for UPupFF+D-20.12+7 and +8:
Simplified Chinese:
upupffD-20.12.07-zhcn-20.0.0s.pet (2 mb)
upupffD-20.12.08-zhcn-20.0.0s.pet (2 mb)

Traditional Chinese:
upupffD-20.12.07-zhhk-20.0.0s.pet (2 mb)
upupffD-20.12.08-zhhk-20.0.0s.pet (2 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in UPupFF+D-20.12+7 and +8

(b) the name+version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for UPupFF+D-20.12+7 and +8. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

for more information about the fcitx, ibus, scim and yong pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

peebee released UPupHH+D-21.04+6 on Jul 24, 2021

more inoformation: viewtopic.php?f=144&t=2736&start=33

download UpupHH+D-21.04+6.iso: https://sourceforge.net/p/zestypup/acti ... 8a8a425dea

I have created 4 half-Chinese language pets each for UPupHH+D-21.04.06:

fcitx Chinese input platform: fcitx_4.2.7-en-zh-bionic-14.3.6.pet (16 mb)

ibus Chinese input platform: ibus_1.5.17-en-zh-bionic-14.3.6.pet (28 mb)

scim Chinese input platform: scim_1.4.14-en-zh-bionic-14.3.6.pet (20 mb)

yong Chinese input platform: yong3264_20201122-en-zh-bionic-14.3.6.pet (8 mb)

Plus 2 Chinese language pets each for UPupHH+D-21.04+6:
Simplified Chinese:
upuphhD-21.04.06-zhcn-14.3.6.pet (2 mb)

Traditional Chinese:
upuphhD-21.04.06-zhhk-14.3.6.pet (2 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in UPupHH+D-21.04.06

(b) the name+version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for UPupHH+D-21.04.06. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

for more information about the fcitx, ibus, scim and yong pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

peebee released LxPupFocal32-21.02+8 on Jul 24, 2021

More information and download LxPupFocal32-21.02+8.iso: https://sourceforge.net/projects/lxpup/ ... xPup21.02/

I have created 4 half-Chinese language pets each for LxPupFocal32-21.02+8

fcitx Chinese input platform: fcitx_4.2.7-en-zh-bionic-14.3.6.pet (16 mb)

ibus Chinese input platform: ibus_1.5.17-en-zh-bionic-14.3.6.pet (28 mb)

scim Chinese input platform: scim_1.4.14-en-zh-bionic-14.3.6.pet (20 mb)

yong Chinese input platform: yong3264_20201122-en-zh-bionic-14.3.6.pet (8 mb)

Plus 2 Chinese language pets for LxPupFocal32-21.02+8:

Simplified Chinese: lxpupffD-21.02.08-zhcn-14.3.6.pet (2 mb)

Traditional Chinese: lxpupffD-21.02.08-zhhk-14.3.6.pet (2 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in LxPupFocal32-21.02+8

(b) the name+version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for LxPupFocal32-21.02+8. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

for more information about the fcitx, ibus, scim and yong pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

fredx181 released a script mklive-sid.gz on Jul 29, 2021 to make DebianDog Sid 64 and 32 bit systems with the mate desktop

for more information and discussions: viewtopic.php?f=46&t=824

download script to download mklive-sid.gz: download/file.php?id=5085

Using the mklive-sid script, I first created 2 debiandog sid systems (1 each for 64 and 32 bit) with the mate desktop option. Then I created half-Chinese and Chinese language debs for these 2 systems.

I have created 1 Half-Chinese deb each for debiandog sid (20210729) mate desktop 64 and 32 bit systems:
64 bit: fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-121.1.5.deb (14 mb)

32 bit: fcitx Chinese input platform: fcitx_4.2.9-en-zh-bionic-120.1.5.deb (18 mb)

Plus 2 Chinese language debs each for debiandog sid (20210729) mate desktop 64 and 32 bit systems:
Simplified Chinese:
64 bit:　DD64_sid_mate_20210729-zhcn-121.1.5.deb (3 mb)
32 bit:　DD32_sid_mate_20210729-zhcn-120.1.5.deb (3 mb)

Traditional Chinese:
64 bit:　DD64_sid_mate_20210729-zhhk-121.1.5.deb (2 mb)
32 bit:　DD32_sid_mate_20210729-zhhk-120.1.5.deb (2 mb)

To use:
(a) the half-Chinese language deb will enable you to display and input Chinese in debiandog sid (20210729) mate desktop 64 bit (use the 121.1.5 debs) and 32 bit (use the 120.1.5 deb)

(b) the name+version corresponding Chinese language pets will give you Simplified Chinese (zhcn deb) or Traditional Chinese (zhhk deb) menus, icon labels, tooltips for debiandog sid (20210729) mate desktop 64 and 32 bit systems. Please note that all Chinese language debs rely on a suitable half-Chinese language deb already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

for more information about the fcitx debs, please see the first posting of this subject （same as for fcitx pets）

Download addresses for these half-Chinese and Chinese language debs are also available in the first posting of this subject.

fredx181 released a script mklive-sid.gz on Jul 29, 2021 to make DebianDog Sid 64 and 32 bit systems to add the mate desktop

for more information and discussions: viewtopic.php?f=46&t=824

download script to download mklive-sid.gz: download/file.php?id=5085

Using the mklive-sid script, I first created 2 debiandog sid systems (1 each for 64 and 32 bit) with the obdog desktop option. Then I created half-Chinese and Chinese language debs for these 2 systems.

I have created 1 Half-Chinese deb each for debiandog sid (20210729) obdog desktop 64 and 32 bit systems:
64 bit: fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-121.1.5.deb (14 mb)

32 bit: fcitx Chinese input platform: fcitx_4.2.9-en-zh-bionic-120.1.5.deb (18 mb)

Plus 2 Chinese language debs each for debiandog sid (20210729) obdog desktop 64 and 32 bit systems:
Simplified Chinese:
64 bit:　DD64_sid_obdog_20210729-zhcn-121.1.5.deb (3 mb)
32 bit:　DD32_sid_obdog_20210729-zhcn-120.1.5.deb (3 mb)

Traditional Chinese:
64 bit:　DD64_sid_obdog_20210729-zhhk-121.1.5.deb (2 mb)
32 bit:　DD32_sid_obdog_20210729-zhhk-120.1.5.deb (2 mb)

To use:
(a) the half-Chinese language deb will enable you to display and input Chinese in debiandog sid (20210729) obdog desktop 64 bit (use the 121.1.5 debs) and 32 bit (use the 120.1.5 deb)

(b) the name+version corresponding Chinese language pets will give you Simplified Chinese (zhcn deb) or Traditional Chinese (zhhk deb) menus, icon labels, tooltips for debiandog sid (20210729) obdog desktop 64 and 32 bit systems. Please note that all Chinese language debs rely on a suitable half-Chinese language deb already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

for more information about the fcitx debs, please see the first posting of this subject （same as for fcitx pets）

Download addresses for these half-Chinese and Chinese language debs are also available in the first posting of this subject.

fredx181 released a script mklive-sid.gz on Jul 29, 2021 to make DebianDog Sid 64 bit systems with the mate desktop

for more information and discussions: viewtopic.php?f=46&t=824

download script to download mklive-sid.gz: download/file.php?id=5085

Using the mklive-sid script, I first created 1 debiandog sid systems (for 64 only) with the chromedog desktop option. Then I created half-Chinese and Chinese language debs for this system.

I have created 1 Half-Chinese deb for debiandog sid (20210729) chromedog desktop 64 bit system:
64 bit: fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-121.1.5.deb (14 mb)

Plus 2 Chinese language debs each for debiandog sid (20210729) chromedog desktop 64 bit system:
Simplified Chinese:
64 bit:　DD64_sid_chromedog_20210729-zhcn-121.1.5.deb (3 mb)

Traditional Chinese:
64 bit:　DD64_sid_chromedog_20210729-zhhk-121.1.5.deb (2 mb)

To use:
(a) the half-Chinese language deb will enable you to display and input Chinese in debiandog sid (20210729) chromedog desktop 64 bit (use the 121.1.5 debs)

(b) the name+version corresponding Chinese language pets will give you Simplified Chinese (zhcn deb) or Traditional Chinese (zhhk deb) menus, icon labels, tooltips for debiandog sid (20210729) chromedog desktop 64 bit system. Please note that all Chinese language debs rely on a suitable half-Chinese language deb already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

for more information about the fcitx debs, please see the first posting of this subject （same as for fcitx pets）

Download addresses for these half-Chinese and Chinese language debs are also available in the first posting of this subject.

mistfire has recently released QuickPup64 21.08 beta1 (Aug 8, 2021)

More information and forum discussions:
viewtopic.php?f=33&t=3171&start=22

Download quickpup64_21.08-beta-1.iso：
https://drive.google.com/file/d/1jSTJlp ... sp=sharing

I have created 4 half-Chinese language pets for QuickPup 21.08 beta1:

fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-21.1.6.pet (14 mb)

ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.1.6.pet (33 mb)

scim Chinese input platform: scim64_1.4.18-en-zh-bionic-21.1.6.pet (16 mb)

yong Chinese input platform: yong3264_20201122-en-zh-bionic-21.1.6.pet (8 mb)

Plus 4 Chinese language pets each for QuickPup64 21.08beta1:
Simplified Chinese:
quickpup64-21.08beta1-zhcn-21.1.6.pet (3 mb)

Traditional Chinese:
quickpup64-21.08beta1-zhhk-21.1.6.pet (3 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in QuickPup64 21.08beta1

(b) the name corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for QuickPup64 21.08beta1. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

for more information about the fcitx, ibus, scim and yong half-Chinese pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.