Puppy Linux Discussion Forum

puddlemoon released jackalpup 0.0 plug and play audio puppy system on Oct 21, 2020

More information and forum discussions:
viewtopic.php?f=119&t=1148

Download:
https://drive.google.com/drive/folders/ ... sp=sharing
https://archive.org/details/Puppy_Linux_jackalpup

I have created 6 half-Chinese language pets for jackalpup 0.0:

fcitx Chinese input platform:
fcitx64_4.2.9-en-zh-bionic-21.0.0s.pet (19 mb)

scim Chinese input platform:
scim64_1.4.9-en-zh-bionic-21.0.0s.pet (12 mb)

yong Chinese input platform:
yong3264_20201122-en-zh-bionic-21.0.0s.pet (8 mb)

Plus 2 Chinese language pets for jackalpup 0.0:

Simplified Chinese:
jackalpup64-0.0-zhcn-21.0.0s.pet (2 mb)

Traditional Chinese:
jackalpup64-0.0-zhhk-21.0.0s.pet (2 mb)

To use:
(a) any 1 of the 3 half-Chinese language pets will enable you to display and input Chinese in jackalpup 0.0

(b) the 2 name corresponding Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for jackalpup 0.0

for more information about the fcitx64, scim64 and yong3264 pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

IOwt3ch released Studio 13.37 3.3 on Jul 16, 2020

More information and forum discussions:
viewtopic.php?f=33&t=126

Download:
https://drive.google.com/drive/folders/ ... AwPPM_N7Ah

I have created 6 half-Chinese language pets for Studio 13.37 3.3:

fcitx Chinese input platform:
fcitx64_4.2.9-en-zh-bionic-21.0.0t.pet (17 mb)

scim Chinese input platform:
scim64_1.4.14-en-zh-bionic-21.0.0t.pet (12 mb)

yong Chinese input platform:
yong3264_20201122-en-zh-bionic-21.0.0t.pet (8 mb)

Plus 2 Chinese language pets for Studio 13.37 3.3:

Simplified Chinese:
studio-13.37.33-zhcn-21.0.0t.pet (4 mb)

Traditional Chinese:
studio-13.37.33-zhhk-21.0.0t.pet (4 mb)

To use:
(a) any 1 of the 3 half-Chinese language pets will enable you to display and input Chinese in Studio 13.37 3.3

(b) the 2 name corresponding Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for Studio 13.37 3.3

for more information about the fcitx64, scim64 and yong3264 pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders.

Please see the first posting for download addresses.

Further to the released of LxPupSc 20.06.00T-k64 on Jun 14, 2020, LxPupSc 20.06.01T-k64 (released on Oct 21, 2020); LxPupSc 20.06.02T-k64 (released on Nov 1, 2020) and LxPupSc 20.06.03T-k64 (released on Nov 25, 2020 ) were subsequently released

More information:
http://murga-linux.com/puppy/viewtopic. ... 751#870751
http://www.smokey01.com/peebee/LxPupSc32-20.06.htm

Download: https://sourceforge.net/projects/lxpup/ ... /interims/

I have created 6 half-Chinese language pets for LxPupSc 20.06.01T-k64 to 03T-k64:
fcitx Chinese input platform:
fcitx_4.2.9-en-zh-bionic-20.0.0s.pet (17 mb)

scim Chinese input platform:
scim_1.4.14-en-zh-bionic-20.0.0s.pet (21 mb)

yong Chinese input platform:
yong3264_20201122-en-zh-xenial-20.0.0s.pet (8 mb)

Plus 2 Chinese language pets for LxPupSc 20.06.01T-k64:
Simplified Chinese:
lxpupsc-20.06.01T.k64-zhcn-20.0.0s.pet (2 mb)
lxpupsc-20.06.02T.k64-zhcn-20.0.0s.pet (2 mb)
lxpupsc-20.06.03T.k64-zhcn-20.0.0s.pet (2 mb)

Traditional Chinese:
lxpupsc-20.06.01Tk64-zhhk-20.0.0s.pet (2 mb)
lxpupsc-20.06.02Tk64-zhhk-20.0.0s.pet (2 mb)
lxpupsc-20.06.03Tk64-zhhk-20.0.0s.pet (2 mb)

To use:
(a) any 1 of the 3 half-Chinese language pets will enable you to display and input Chinese in LxPupSc 20.06.01T-k64 to 03T-k64

(b) the 2 name corresponding Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for LxPupSc 20.00.01T-k64 to 03T-k64

for more information about the fcitx, scim and yong pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

BarryK has recently released EasyOS Dunfell-series 0.92 (Oct 16, 2020), 0.93 (Nov 18, 2020) and 0.95 (Oct 24, 2020)

more information, annoucement notes and download addresses:
https://easyos.org/forum/forumdisplay.php?fid=2

I have created 6 half-Chinese language pets each for easydunfell 0.92 to 0.95:
fcitx Chinese input platform:
fcitx64_4.2.9-en-zh-bionic-21.0.0.pet (17 mb)

scim Chinese input platform:
scim64_1.4.18-en-zh-bionic-21.0.0.pet (12 mb)

yong Chinese input platform:
yong3264_20201122-en-zh-bionic-21.0.0.pet (8 mb)

Plus 2 Chinese language pets each for easy dunfell 0.92 to 0.95:
Simplified Chinese:
easydunfell64-0.92-zhcn-21.0.0.pet (4 mb)
easydunfell64-0.93-zhcn-21.0.0.pet (4 mb)
easydunfell64-0.95-zhcn-21.0.0.pet (4 mb)

Traditional Chinese:
easydunfell64-0.92-zhhk-21.0.0.pet (4 mb)
easydunfell64-0.93-zhhk-21.0.0.pet (4 mb)
easydunfell64-0.95-zhhk-21.0.0.pet (4 mb)

To use:
(a) any 1 of the 3 half-Chinese language pets will enable you to display and input Chinese in easy dunfell 0.92 to 0.95

(b) the 2 name corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for easy dunfell 0.92 to 0.95

more information about the fcitx64, scim64 and yong3264 pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

Further to the release of easy os buster 2.3.8, updated versions 2.4.91 to 2.5 were released

more information, annoucement notes and download addresses:
easyos viewtopic.php?f=63&t=1398
easypup https://bkhome.org/news/202011/easypup- ... eased.html

I have created 6 half-Chinese language pets each for easy os buster 4.91 and 2.4.92:
fcitx Chinese input platform:
fcitx64_4.2.9-en-zh-bionic-21.0.0.pet (17 mb)

scim Chinese input platform:
scim64_1.4.18-en-zh-bionic-21.0.0.pet (12 mb)

yong Chinese input platform:
yong3264_20201122-en-zh-bionic-21.0.0.pet (8 mb)

Plus 2 Chinese language pets each for easy buster 2.4.91 to 2.5:
Simplified Chinese:
easyos-2.5-zhcn-21.0.0.pet (3 mb)
easyos-2.4.92-zhcn-21.0.0.pet (3 mb)
easypup-2.4.91-zhcn-21.0.0.pet (3 mb)

Traditional Chinese:
easyos-2.5-zhhk-21.0.0.pet (3 mb)
easyos-2.4.92-zhhk-21.0.0.pet (3 mb)
easypup-2.4.91-zhhk-21.0.0.pet (3 mb)

To use:
(a) any 1 of the 3 half-Chinese language pets will enable you to display and input Chinese in easyos buster 2.4.91 to 2.5

(b) the 2 name corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for easyos buster 2.4.91 to 2.5

more information about the fcitx64 pets, scim64 pets and yong3264 pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

Further to the release of Chinese language pets 13.1.0 for Fatdog64-811 on Nov 1, 2020, I have upgraded them to 21.0.0f

More information about the Fatdog64-811:
viewtopic.php?f=60&t=746

Download Fatdog64-811:
http://distro.ibiblio.org/fatdog/iso/
https://mirror.aarnet.edu.au/pub/fatdog/iso/
http://ftp.cc.uoc.gr/mirrors/linux/fatdog/iso/
http://ftp.nluug.nl/ibiblio/distributions/fatdog/iso/

(a) I have created 3 half-Chinese language pets version 21.0.0f for Fatdog64-811:
fcitx Chinese input platform:
fcitx64_4.2.7-fd64802-en-zh-raring-21.0.0f.txz (15 mb)

scim Chinese input platform:
scim64_1.4.14-fd64802-en-zh-raring-21.0.0f.txz (12 mb)

yong Chinese input platform:
yong_4.2.0-fd64802-en-zh-raring-21.0.0f.txz (5 mb)

(b) I have also created 2 version 21.0.0f Chinese language pets for Fatdog64-811:
Simplified Chinese:
fd64-8.1.1-zhcn-21.0.0f.txz (1 mb)

Traditional Chinese:
fd64-8.1.1-zhhk-21.0.0f.txz (1 mb)

To use:
(c) after install any 1 of the 3 half-Chinese language pets under (a): your Fatdog64 811 (requires the 802 half-Chinese language pets) system can display and input Chinese (desktop menus, sub-menus and icon labels are still English)

(d) after install any 1 of the 3 half-Chinese language pets under (a) and also install 1 of the 2 the version corresponding Chinese language pets under (b), your Fatdog64 811 system can display and input Chinese; plus your desktop menus, sub-menus and icon labels are changed to Simplified Chinese or Traditional Chinese

more information about the fcitx64, scim64 and yong half-Chinese language pets, please see the first postings of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

Further to the release of Chinese language pets version 18.0.51 on Nov 11, 2020 for fossapup64 9.0.5 and 9.5.0, I have upgraded them to version 21.0.0s

fcitx Chinese input platform:
fcitx64_4.2.9-en-zh-bionic-21.0.0s.pet (17 mb)

scim Chinese input platform:
scim64_1.4.14-en-zh-bionic-21.0.0s.pet (12 mb)

yong Chinese input platform:
yong3264_20201122-en-zh-bionic-21.0.0s.pet (8 mb)

plus 2 version 20.0.0s Chinese language pets for fossapup64 9.0.5 and 9.5.0:
Simplified Chinese:
fossapup64-9.0.5-zhcn-21.0.0s.pet (2 mb)
fossapup64-9.5.0-zhcn-21.0.0s.pet (2 mb)

Traditional Chinese:
fossapup64-9.0.5-zhhk-21.0.0s.pet (2 mb)
fossapup64-9.5.0-zhhk-21.0.0s.pet (2 mb)

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

exton recently released PuppEx Focal64 201119 and 201121

More information and forum discussions:
viewtopic.php?f=33&t=1429

Download iso:
https://sourceforge.net/projects/puppex/
http://archive.org/details/Puppy_Linux_Puppex-Focal64

I have created 3 half-Chinese language pets for PuppEx Focal64 201119 and 201121 :

fcitx Chinese input platform:
fcitx64_4.2.9-en-zh-bionic-21.0.0s.pet (19 mb)

scim Chinese input platform:
scim64_1.4.9-en-zh-bionic-21.0.0s.pet (12 mb)

yong Chinese input platform:
yong3264_20201122-en-zh-bionic-21.0.0s.pet (8 mb)

Plus 2 Chinese language pets for PuppEx Focal64 201119 and 201121 :

Simplified Chinese:
pupexfocal64-20.11.19-zhcn-21.0.0s.pet (2 mb)
pupexfocal64-20.11.21-zhcn-21.0.0s.pet (2 mb)

Traditional Chinese:
pupexfocal64-20.11.19-zhhk-21.0.0s.pet (2 mb)
pupexfocal64-20.11.21-zhhk-21.0.0s.pet (2 mb)

To use:
(a) any 1 of the 3 half-Chinese language pets will enable you to display and input Chinese in PuppEx Focal64 201119 and 201121

(b) the 2 name corresponding Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for PuppEx Focal64 201119 and 201121

for more information about the fcitx64, scim64 and yong3264 pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

Further to the release of easy os and easy pup buster 2.5.1, updated versions 2.5.1, 2.5.3 and 2.5.5 were released

more information, annoucement notes and download addresses:
easyos viewtopic.php?f=63&t=1533
easypup https://bkhome.org/linux/easypup-a-blen ... asyos.html

I have created 4 half-Chinese language pets each for easy os 2.5.1, 2.5.3 and 2.5.5 and easy pup buster 2.5.1:
fcitx Chinese input platform:
fcitx64_4.2.9-en-zh-bionic-21.0.0.pet (17 mb)

ibus Chinese input platform:
ibus64_1.5.9-en-zh-bionic-21.0.0.pet (24 mb)

scim Chinese input platform:
scim64_1.4.18-en-zh-bionic-21.0.0.pet (12 mb)

yong Chinese input platform:
yong3264_20201122-en-zh-bionic-21.0.0.pet (8 mb)

Plus 2 Chinese language pets each for easyos 2.5.1, 2.5.3 and 2.5.5 and easypup buster 2.5.1:
Simplified Chinese:
easyos-2.5.5-zhcn-21.0.0.pet (3 mb)
easyos-2.5.3-zhcn-21.0.0.pet (3 mb)
easyos-2.5.1-zhcn-21.0.0.pet (3 mb)
easypup-2.5.1-zhcn-21.0.0.pet (3 mb)

Traditional Chinese:
easyos-2.5.5-zhhk-21.0.0.pet (3 mb)
easyos-2.5.3-zhhk-21.0.0.pet (3 mb)
easyos-2.5.1-zhhk-21.0.0.pet (3 mb)
easypup-2.5.1-zhhk-21.0.0.pet (3 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in easyos 2.5.1, 2.5.3 and 2.5.5 easypup buster 2.5.1

(b) the 2 name corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for easyos 2.5.1, 2.5.3 and 2.5.5 and easypup buster 2.5.1

more information about the fcitx64, ibus64, scim64 and yong3264 pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

radky released a number of busterpup in 2019 and 3 of them are busterpup 8.0, busterpup 8.0 thin and buster32 stripped.

More information and download iso:
https://archive.org/details/Puppy_Linux_BusterPup

I have created 4 half-Chinese language pets for busterpup 8.0, busterpup 8.0 thin and buster32 stripped:
fcitx Chinese input platform:
fcitx_4.2.7-en-zh-bionic-20.0.0.pet (17 mb)

ibus Chinese input platform:
ibus_1.5.7-en-zh-bionic-20.0.0.pet (29 mb)

scim Chinese input platform:
scim_1.4.14-en-zh-bionic-20.0.0.pet (16 mb)

yong Chinese input platform:
yong3264_20201122-en-zh-bionic-20.0.0.pet (8 mb)

Plus 2 Chinese language pets for busterpup 8.0, busterpup 8.0 thin and buster32 stripped:
Simplified Chinese:
busterpup-8.0.0-zhcn-20.0.0.pet (2 mb)
busterpup-8.0.0thin-zhcn-20.0.0.pet (2 mb)
buster-8.0stripped-zhcn-20.0.0.pet (2 mb)

Traditional Chinese:
busterpup-8.0.0-zhhk-20.0.0.pet (2 mb)
busterpup-8.0.0thin-zhhk-20.0.0.pet (2 mb)
buster-8.0stripped-zhhk-20.0.0.pet (2 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in busterpup 8.0, busterpup 8.0 thin and buster32 stripped

(b) the version corresponding Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for busterpup 8.0, busterpup 8.0 thin and buster32 stripped

for more information about the fcitx, ibus, scim and yong3264 pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

joseup2424 released a number of DpupBuster CE 32 bit systems in 2019, one updated version is dpupbuster32 8.0.0 18012020

More information:
dpupbuster32 8.0.0 (27072020 and 04012020): https://archive.org/details/Puppy_Linux_Dpup_Buster

download iso:
dpupbuster32 8.0.0 18012020: https://archive.org/details/Puppy_Linux_Dpup_Buster

I have created 4 half-Chinese language pets for dpupbuster32 8.0.0 18012020:
fcitx Chinese input platform:
fcitx_4.2.7-en-zh-bionic-20.0.0.pet (17 mb)

ibus Chinese input platform:
ibus_1.5.7-en-zh-bionic-20.0.0.pet (29 mb)

scim Chinese input platform:
scim_1.4.14-en-zh-bionic-20.0.0.pet (16 mb)

yong Chinese input platform:
yong3264_20201122-en-zh-bionic-20.0.0.pet (8 mb)

Plus 2 Chinese language pets each for dpupbuster32 8.0.0 18012020:
Simplified Chinese:
dpupbuster32-8.0.0.18012020-zhcn-20.0.0.pet (1 mb)

Traditional Chinese:
dpupbuster32-8.0.0.18012020-zhhk-20.0.0.pet (1 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in dpupbuster32 8.0.0 18012020

(b) the version corresponding Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for dpupbuster32 8.0.0 18012020

for more information about the fcitx, ibus, scim and yong3264 pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

peebee released UPupEF-20.04+8 on Dec 14, 2020 and UPupFF+D-20.12+1 on Dec 19, 2020

More information:
upupef 20.04.08: http://distro.ibiblio.org/puppylinux/pu ... -20.04.htm
upupef and upupff: https://sourceforge.net/p/zestypup/acti ... a8c397a930

download iso:
upupef 20.04.07: https://sourceforge.net/projects/zestyp ... o/download
upupef and upupff: https://sourceforge.net/p/zestypup/acti ... a8c397a930

I have created 4 half-Chinese language pets each for UPupEF-20.04+8 and UPupFF+D-20.12+1:

fcitx Chinese input platform:
fcitx_4.2.9-en-zh-bionic-20.0.0s.pet (16 mb)

ibus Chinese input platform:
ibus_1.5.7-en-zh-bionic-20.0.0s.pet (28 mb)

scim Chinese input platform:
scim_1.4.14-en-zh-bionic-20.0.0s.pet (20 mb)

yong Chinese input platform:
yong3264_20201122-en-zh-bionic-20.0.0s.pet (8 mb)

Plus 2 Chinese language pets each for UPupEF-20.04+8 and UPupFF+D-20.12+1:
Simplified Chinese:
upupef-20.04.08-zhcn-20.0.0s.pet (2 mb)
upupffD-20.12.01-zhcn.20.0.0s (2 mb)

Traditional Chinese:
upupef-20.04.08-zhhk-20.0.0s.pet (2 mb)
upupffD-20.12.01-zhhk.20.0.0s (2 mb)

To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in UPupEF-20.04+8 and UPupFF+D-20.12+1

(b) the name+version corresponding Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for UPupEF-20.04+8 and UPupFF+D-20.12+1

for more information about the fcitx, ibus, scim and yong pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders.

Please see the first posting for download addresses.

01micko released 2 slacko 7.0 Puppy linux systems on Jan 4, 2021, one for 32 and one for 64 bit.

More information:
viewtopic.php?f=118&t=192

Download iso:
32 bit: https://distro.ibiblio.org/puppylinux/p ... ko-7.0/32/
64 bit: https://distro.ibiblio.org/puppylinux/p ... ko-7.0/64/

I have created 3 half-Chinese language pets each for slacko 7.0 and slacko64 7.0
fcitx Chinese input platform:
slacko-7.0.0: fcitx_4.2.7-en-zh-raring-14.3.6.pet (15 mb)
slacko64-7.0.0: fcitx64_4.2.7-en-zh-raring-14.0.6.pet (13 mb)

(ibus cannot run in slacko 7.0 and slacko64 7.0)

scim Chinese input platform:
slacko-7.0.0: scim_1.4.14-en-zh-raring-14.3.6.pet (14 mb)
slacko64-7.0.0: scim64_1.4.14-en-zh-raring-14.0.6.pet (12 mb)

yong Chinese input platform:
slacko-7.0.0: yong3264_20201122-en-zh-raring-14.3.6.pet (8 mb)
slacko64-7.0.0: yong3264_20201122-en-zh-raring-14.0.6.pet (8 mb)

Plus 2 Chinese language pets each for slacko 7.0 and slacko64 7.0:
Simplified Chinese:
slacko-7.0.0-zhcn-14.3.6.pet (1 mb)
slacko64-7.0.0-zhcn-14.0.6.pet (3 mb)

Traditional Chinese:
slacko-7.0.1F-zhhk-14.3.6.pet (1 mb)
slacko64-7.0.0-zhhk-14.0.6.pet (4 mb)

To use:
(a) any 1 of the 3 half-Chinese language pets will enable you to display and input Chinese in slacko 7.0 and slacko64 7.0

(b) the version corresponding Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for slacko 7.0 and slacko64 7.0

for more information about the fcitx, ibus, scim and yong pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

peebee has released BionicPup32 8.0.25 on Jan 2, 2021

More information and forum discussions:
viewtopic.php?f=115&t=165

Download: http://distro.ibiblio.org/puppylinux/pu ... cpup32.htm

I have created 4 half-Chinese language pets for BionicPup32 8.0.25:

fcitx Chinese input platform:
fcitx_4.2.9-en-zh-bionic-20.0.1.pet (17 mb)

ibus Chinese input platform:
ibus_1.5.7-en-zh-bionic-20.0.1.pet (29 mb)

scim Chinese input platform:
scim_1.4.14-en-zh-bionic-20.0.1.pet (16 mb)

yong Chinese input platform:
yong3264_20201122-en-zh-bionic-20.0.1.pet (8 mb)

Plus 2 Chinese language pets each for BionicPup32 8.0.25:
Simplified Chinese:
bionicpup32-8.0.25-zhcn-20.0.1.pet (4 mb)

Traditional Chinese:
bionicpup32-8.0.25-zhhk-20.0.1.pet (4 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in BionicPup32 8.0.25

(b) the Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for BionicPup32 8.0.25

for more information about the fcitx, ibus, scim and yong half-Chinese pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

mistfire has released QuickPup 20.06.1 and 20.06.2 at the end of 2020

More information and forum discussions: viewtopic.php?f=33&t=1743

Download: https://drive.google.com/file/d/1bCUcrI ... sp=sharing

I have created 4 half-Chinese language pets for QuickPup 20.06.1 and 20.06.2:

fcitx Chinese input platform:
fcitx_4.2.7-en-zh-bionic-20.1.0.pet (17 mb)

ibus Chinese input platform:
ibus_1.5.7-en-zh-bionic-20.1.0.pet (34 mb)

scim Chinese input platform:
scim_1.4.14-en-zh-bionic-20.1.0.pet (16 mb)

yong Chinese input platform:
yong3264_20201122-en-zh-bionic-20.1.0.pet (8 mb)

Plus 2 Chinese language pets each for QuickPup 20.06.1 and 20.06.2:
Simplified Chinese:
quickpup-20.06.01-zhcn-20.1.0.pet (2 mb)
quickpup-20.06.02-zhcn-20.1.0.pet (2 mb)

Traditional Chinese:
quickpup-20.06.01-zhcn-20.1.0.pet (2 mb)
quickpup-20.06.02-zhcn-20.1.0.pet (2 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in QuickPup 20.06.1 and 20.06.2

(b) the Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for QuickPup 20.06.1 and 20.06.2

for more information about the fcitx, ibus, scim and yong half-Chinese pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

Barry K released EasyOS 0.101 on Dec 26, 2020, 0.103 on Dec 28, 2020 and 0.104 on Dec 30, 2020

More information:
viewforum.php?f=63

Download iso:
http://distro.ibiblio.org/easyos/amd64/ ... ell/0.101/
http://distro.ibiblio.org/easyos/amd64/ ... ell/0.103/
http://distro.ibiblio.org/easyos/amd64/ ... ell/0.104/

I have created 3 half-Chinese language pets each for EasyOS 0.101 and 0.104:
fcitx Chinese input platform:
fcitx64_4.2.9-en-zh-bionic-18.0.6.pet (20 mb)

(ibus cannot run in EasyOS 0.101 and 0.104)

scim Chinese input platform:
scim64_1.4.18-en-zh-bionic.18.0.6.pet (14 mb)

yong Chinese input platform:
yong3264_20201122-en-zh-bionic-18.0.6.pet (8 mb)

Plus 2 Chinese language pets each for EasyOS 0.101 and 0.104:
Simplified Chinese:
easyos-0.101-zhcn-18.0.6.pet (4 mb)
easyos-0.104-zhcn-18.0.6.pet (4 mb)

Traditional Chinese:
easyos-0.101-zhhk-18.0.6.pet (4 mb)
easyos-0.104-zhhk-18.0.6.pet (4 mb)

To use:
(a) any 1 of the 3 half-Chinese language pets will enable you to display and input Chinese in EasyOS 0.101 and 0.104

(b) the version corresponding Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for EasyOS 0.101 and 0.104

For more information about the fcitx64, scim64 and yong half-Chinese language pets, please see the first postings of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

peebee recently released scpup and scpup64 version 21.01.00

more information and discussions: viewforum.php?f=122

download 32 bit scpup 21.01.00:
https://sourceforge.net/projects/spup/files/ScPup/
http://distro.ibiblio.org/puppylinux/pu ... -21.01.htm

download 64 bit scpup 21.01.00
https://sourceforge.net/projects/spup/files/ScPup64/
http://distro.ibiblio.org/puppylinux/pu ... -21.01.htm

I have created 4 half-Chinese language pets each for scpup and scpup64 version 21.01.00:
fcitx Chinese input platform:
scpup: fcitx_4.2.7-en-zh-raring-14.3.6.pet (24 mb)
scpup64: fcitx64_4.2.7-en-zh-raring-14.0.6.pet (14 mb)

ibus Chinese input platform:
ibus: ibus_1.5.17-en-zh-raring-14.3.6.pet (34 mb)
ibus64: ibus64_1.5.19-en-zh-raring-14.0.6.pet (34 mb)

scim Chinese input platform:
scpup: scim_1.4.14-en-zh-raring-14.3.6.pet (14 mb)
scpup64: scim64_1.4.14-en-zh-raring-14.0.6.pet (13 mb)

yong Chinese input platform:
scpup: yong3264_20201122-en-zh-raring-14.3.6.pet (8 mb)
scpup64: yong3264_20201122-en-zh-raring-14.0.6.pet (8 mb)

Plus 2 Chinese language pets each for scpup and scpup64 version 21.01.00:
Simplified Chinese:
scpup: scpup-21.01.00T-zhcn-14.3.6.pet (2 mb)
scpup64: scpup64-21.01.00T-zhcn-14.0.6.pet (2 mb)

Traditional Chinese:
scpup: scpup-21.01.00T-zhhk-14.3.6.pet (2 mb)
scpup64: scpup64-21.01.00T-zhhk-14.0.6.pet (1 mb)

To use:
(a) any half-Chinese language pet will enable you to display and input Chinese in scpup (please use the 14.3.6 pets) and scpup64 (please use the 14.0.6 pets) version 21.01.00;

(b) the 2 name corresponding Chinese language pets will give you Simplified Chinese (use the zhcn pets) or Traditional Chinese (use the zhhk pets) desktop menus, icon labels, tooltips for scpup and scpup64 version 21.01.00

for more information about the fcitx, ibus, scim and yong pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

8Geee released atomicPupxxi66 on Dec 31, 2020

More information: viewtopic.php?f=33&t=307

Download iso: https://archive.org/details/AtomicPup-xxi66

I have created 6 half-Chinese language pets for atomicpupxxi66:
fcitx Chinese input platform:
fcitx_4.2.7-en-zh-precise-12.2.0.pet (24.6 mb)

(ibus cannot run in atomicpupxxi66)

scim Chinese input platform:
scim_1.4.9-en-zh-precise-12.2.0.pet (22.1 mb)

yong Chinese input platform:
yong3264_4.2.0-en-zh-precise-12.2.0.pet (8.6 mb)
yong3264_th_2016.11.5-en-zh-precise-12.2.0.pet (7.9 mb)
yong3264_thjj_2016.7.29-en-zh-precise-12.2.0.pet (8.4 mb)
yong3264_thth_2014.8.5-en-zh-precise-12.2.0.pet (9.5 mb)

Plus 2 Chinese language pets for atomicpupxxi66:
Simplified Chinese:
atomicpup-xxi66-zhcn-12.2.0.pet (2.2 mb)

Traditional Chinese:
atomicpup-xxi66-zhhk-12.2.0.pet (1.7 mb)

To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in atomicpupxxi66

(b) the version corresponding Chinese language pets will give you Simplified Chinese (use the zhcn pet) or Traditional Chinese (use the zhcn pet) desktop menus, icon labels, tooltips for atomicpupxxi66

for more information about the fcitx, scim and yong pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

mistfire has recently released QuickPup 20.06.3; 20.06.4; 20.06.5 and 20.06.6

More information and forum discussions:
QuickPup 20.06.03: viewtopic.php?f=33&t=1743&start=37
QuickPup 20.06.04: viewtopic.php?f=33&t=1743&start=44
QuickPup 20.06.05：viewtopic.php?f=33&t=1743&start=47
QuickPup 20.06.06：viewtopic.php?f=33&t=1743&start=53

Download iso:
QuickPup 20.06.03: https://drive.google.com/file/d/12dubJ8 ... sp=sharing
QuickPup 20.06.04: https://drive.google.com/file/d/1MStwip ... sp=sharing
QuickPup 20.06.05: https://drive.google.com/file/d/1b0wySa ... sp=sharing
QuickPup 20.06.06: https://drive.google.com/file/d/1HOMScN ... sp=sharing

I have created 4 half-Chinese language pets for QuickPup 20.06.3; 20.06.4; 20.06.5 and 20.06.6:

fcitx Chinese input platform:
fcitx_4.2.7-en-zh-bionic-20.1.0.pet (17 mb)

ibus Chinese input platform:
ibus_1.5.17-en-zh-bionic-20.1.0.pet (34 mb)

scim Chinese input platform:
scim_1.4.14-en-zh-bionic-20.1.0.pet (16 mb)

yong Chinese input platform:
yong3264_20201122-en-zh-bionic-20.1.0.pet (8 mb)

Plus 2 Chinese language pets each for QuickPup 20.06.3; 20.06.4; 20.06.5 and 20.06.6:
Simplified Chinese:
quickpup-20.06.03-zhcn-20.1.0.pet (2 mb)
quickpup-20.06.04-zhcn-20.1.0.pet (2 mb)
quickpup-20.06.05-zhcn-20.1.0.pet (2 mb)
quickpup-20.06.06-zhcn-20.1.0.pet (2 mb)

Traditional Chinese:
quickpup-20.06.03-zhhk-20.1.0.pet (2 mb)
quickpup-20.06.04-zhhk-20.1.0.pet (2 mb)
quickpup-20.06.05-zhhk-20.1.0.pet (2 mb)
quickpup-20.06.06-zhhk-20.1.0.pet (2 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in QuickPup 20.06.3; 20.06.4; 20.06.5 and 20.06.6

(b) the name corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for QuickPup 20.06.3; 20.06.4; 20.06.5 and 20.06.6

for more information about the fcitx, ibus, scim and yong half-Chinese pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

peebee released LxPupSc64 21.01.00T and LxPupSc-21.01+0-T-k64 on Jan 1, 2021; LxPupSc-21.01+0-T-k64 (Feb 3, 2021) and LxPupSc64 21.01.01T (Feb 13, 2021)

Main features:
LxPupSc-21.01+0-T-k64 and +1：Built from 32-bit Slackware Current components with LXDE desktop
LxPupSc64 21.01.00T and +1：Built from 64-bit Slackware Current components with LXDE desktop

More information:
LxPupSc-21.01+0-T-k64 and +1: http://www.smokey01.com/peebee/LxPupSc32-21.01.htm
LxPupSc64-21.01+0-T and +1: http://distro.ibiblio.org/puppylinux/pu ... -21.01.htm

Download iso:
LxPupSc-21.01+0-T-k64 and +1: https://sourceforge.net/projects/spup/f ... o/download
LxPupSc64-21.01+0-T and +1: https://sourceforge.net/projects/lxpup/ ... o/download

I have created 4 half-Chinese language pets each for LxPupSc64 21.01.00T; 01T and LxPupSc-21.01+0-T-k64; +1:
fcitx Chinese input platform:
LxPupSc-21.01+0-T-k64, +1：fcitx64_4.2.7-en-zh-raring-14.3.6.pet (14 mb)
LxPupSc64-21.01+0-T, +1:　fcitx_4.2.７-en-zh-raring-14.0.6.pet (16 mb)

ibus Chinese input platform:
LxPupSc-21.01+0-T-k64, +1：ibus64_1.5.19-en-zh-raring-14.3.6.pet (34 mb)
LxPupSc64-21.01+0-T, +1: ibus_1.5.17-en-zh-raring-14.0.6.pet (34 mb)

scim Chinese input platform:
LxPupSc-21.01+0-T-k64, +1：scim64_1.4.14-en-zh-raring-14.3.6.pet (13 mb)
LxPupSc64-21.01+0-T, +1:　scim_1.4.14-en-zh-raring-14.0.6.pet (14 mb)

yong Chinese input platform:
LxPupSc-21.01+0-T-k64, +1：yong3264_20201122-en-zh-raring-14.3.6.pet (9 mb)
LxPupSc64-21.01+0-T, +1:　yong3264_20201122-en-zh-raring-14.0.6.pet (9 mb)

Plus 2 Chinese language pets each for LxPupSc64 21.01.00T; 01T and LxPupSc-21.01+0-T-k64; +1:
Simplified Chinese:
lxpupsc-21.01.01Tk64-zhcn-14.3.6.pet (2 mb)
lxpupsc-21.01.00Tk64-zhcn-14.3.6.pet (2 mb)
lxpupsc64-21.01.01T-zhcn-14.0.6.pet (2 mb)
lxpupsc64-21.01.00T-zhcn-14.0.6.pet (2 mb)

Traditional Chinese:
lxpupsc-21.01.01Tk64-zhhk-14.3.6.pet (2 mb)
lxpupsc-21.01.00Tk64-zhhk-14.3.6.pet (2 mb)
lxpupsc64-21.01.01T-zhhk-14.0.6.pet (1 mb)
lxpupsc64-21.01.00T-zhhk-14.0.6.pet (1 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in LxPupSc-21.01+0-T-k64; +1（use 14.3.6 pets）and LxPupSc64 21.01.00T; 01T （use 14.0.6 pets）

(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for LxPupSc64 21.01.00T; 01T and LxPupSc-21.01+0-T-k64; +1

For more information about the fcitx, ibus, scim and yong half-Chinese language pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

peebee released arch64 20.05.02 and arch32 20.05.02 on Oct 9, 2020

Main features:
experimental Puppy systems with arch linux favour

More information: viewtopic.php?f=33&t=56&start=3

Download iso:
arch64 20.05.02: http://www.smokey01.com/peebee/downloads/a64pup/
arch32 20.05.02: http://www.smokey01.com/peebee/downloads/a32pup/

I have created 3 half-Chinese language pets each for arch64 20.05.02 and arch32 20.05.02:
fcitx Chinese input platform:
arch64 20.05.02：fcitx64_4.2.7-en-zh-raring-14.0.6.pet (14 mb)
arch32 20.05.02:　fcitx_4.2.７-en-zh-raring-14.3.6.pet (16 mb)

(ibus cannot run in arch64 20.05.02 and arch32 20.05.02)

scim Chinese input platform:
arch64 20.05.02：scim64_1.4.14-en-zh-raring-14.0.6.pet (13 mb)
arch32 20.05.02:　scim_1.4.14-en-zh-raring-14.3.6.pet (14 mb)

yong Chinese input platform:
arch64 20.05.02：yong3264_20201122-en-zh-raring-14.0.6.pet (9 mb)
arch32 20.05.02:　yong3264_20201122-en-zh-raring-14.3.6.pet (9 mb)

Plus 2 Chinese language pets each for arch64 20.05.02 and arch32 20.05.02:
Simplified Chinese:
arch64 20.05.02：arch64-20.05.02-zhcn-14.0.6.pet (2 mb)
arch32 20.05.02：arch32-20.05.02-zhcn-14.3.6.pet (2 mb)

Traditional Chinese:
arch64 20.05.02：arch64-20.05.02-zhhk-14.0.6.pet (2 mb)
arch32 20.05.02：arch32-20.05.02-zhhk-14.3.6.pet (1 mb)

To use:
(a) any 1 of the 3 half-Chinese language pets will enable you to display and input Chinese in arch64 20.05.02 （use 14.0.6 pets） and arch32 20.05.02 （use 14.3.6 pets）

(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for arch64 20.05.02 and arch32 20.05.02

For more information about the fcitx, ibus, scim and yong half-Chinese language pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

norgo released SLC64 2020-12 on Jan 24, 2020

Main features:
64 bit slackware current basing woof-ce build
kernel 5.7.2 ( by peebee )
X.Org 1.20.9
JWM 2.3.6
Qt 5.15.1 (currently only needed packages)
audacity 2.4.2
audacious 4.0.5
avidemux 2.7.0
qpdfview 0.4.18
qhexedit2 0.8.3
seamonkey-2.53.5.1
simplescreenrecorder 0.4.2
smplayer 20.6.0
mpv 0.32.0
ffmpeg 4.3
winff

More information: viewtopic.php?f=144&t=1976

Download iso: https://smokey01.com/norgo/slacko/064/064.php

I have created 3 half-Chinese language pets for SLC64 2020-12:
fcitx Chinese input platform:
fcitx64_4.2.7-en-zh-raring-14.0.6.pet (14 mb)

(ibus cannot run in SLC64 2020-12)

scim Chinese input platform:
scim64_1.4.14-en-zh-raring-14.0.6.pet (13 mb)

yong Chinese input platform:
yong3264_20201122-en-zh-raring-14.0.6.pet (9 mb)

Plus 2 Chinese language pets each for SLC64 2020-12:
Simplified Chinese:
slc64-2020.12-zhcn-14.0.6.pet (2 mb)

Traditional Chinese:
slc64-2020.12-zhhk-14.0.6.pet (2 mb)

To use:
(a) any 1 of the 3 half-Chinese language pets will enable you to display and input Chinese in SLC64 2020-12

(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pet) or Traditional Chinese (use zhhk pet) desktop menus, icon labels, tooltips for SLC64 2020-12

For more information about the fcitx, ibus, scim and yong half-Chinese language pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

Further to the release of easy os 2.5.5, updated version 2.6.1 was released

more information, annoucement notes and download addresses: viewtopic.php?f=63&t=2029

I have created 4 half-Chinese language pets each for easy os 2.6.1:
fcitx Chinese input platform:
fcitx64_4.2.9-en-zh-bionic-21.0.0.pet (17 mb)

ibus Chinese input platform:
ibus64_1.5.19-en-zh-bionic-21.0.0.pet (24 mb)

scim Chinese input platform:
scim64_1.4.18-en-zh-bionic-21.0.0.pet (12 mb)

yong Chinese input platform:
yong3264_20201122-en-zh-bionic-21.0.0.pet (8 mb)

Plus 2 Chinese language pets for easyos 2.6.1:
Simplified Chinese:
easyos-2.6.1-zhcn-21.0.0.pet (3 mb)

Traditional Chinese:
easyos-2.6.1-zhhk-21.0.0.pet (3 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in easyos 2.6.1

(b) the 2 name corresponding Chinese language pets will give you Simplified Chinese (use the zhcn pet) or Traditional Chinese (use the zhhk pet) deaktop menus, icon labels, tooltips for easyos 2.6.1

more information about the fcitx64, ibus64, scim64 and yong3264 pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

peebee recently released UPupFF+D-20.12+2, +3; UPupGG+D-20.10+5; UPupHH+D-21.04.alpha+0, +1

More information:
upupFF: viewtopic.php?f=144&t=405
upupGG: viewtopic.php?f=144&t=1176
upupHH: viewtopic.php?f=124&t=472&start=30

download iso:
upupFF: http://distro.ibiblio.org/puppylinux/pu ... -20.12.htm
upupGG: http://distro.ibiblio.org/puppylinux/pu ... -20.10.htm
upupHH: https://sourceforge.net/projects/zestyp ... o/download

I have created 4 half-Chinese language pets each for UPupFF+D-20.12+2, +3; UPupGG+D-20.10+5; UPupHH+D-21.04.alpha+0, +1:

fcitx Chinese input platform:
for UPupFF+D-20.12+2 and +3: fcitx_4.2.9-en-zh-bionic-20.0.0s.pet (16 mb)
for UPupGG+D-20.10+5 plus UPupHH+D-21.04.alpha+0 and +1: fcitx_4.2.7-en-zh-bionic-14.3.6.pet (16 mb)

ibus Chinese input platform:
for UPupFF+D-20.12+2 and +3: ibus_1.5.17-en-zh-bionic-20.0.0s.pet (28 mb)
for UPupGG+D-20.10+5 plus UPupHH+D-21.04.alpha+0 and +1: ibus_1.5.17-en-zh-bionic-14.3.6.pet (28 mb)

scim Chinese input platform:
for UPupFF+D-20.12+2 and +3: scim_1.4.14-en-zh-bionic-20.0.0s.pet (20 mb)
for UPupGG+D-20.10+5 plus UPupHH+D-21.04.alpha+0 and +1: scim_1.4.14-en-zh-bionic-14.3.6.pet (20 mb)

yong Chinese input platform:
for UPupFF+D-20.12+2 and +3: yong3264_20201122-en-zh-bionic-20.0.0s.pet (8 mb)
for UPupGG+D-20.10+5 plus UPupHH+D-21.04.alpha+0 and +1: yong3264_20201122-en-zh-bionic-14.3.6.pet (8 mb)

Plus 2 Chinese language pets each for UPupFF+D-20.12+2, +3; UPupGG+D-20.10+5; UPupHH+D-21.04.alpha+0, +1:
Simplified Chinese:
upupffD-20.12.02-zhcn-20.0.0s.pet (2 mb)
upupffD-20.12.03-zhcn-20.0.0s.pet (2 mb)
upupggD-20.10.05-zhcn-14.3.6.pet (2 mb)
upuphhD-21.04.a0-zhcn-14.3.6.pet (2 mb)
upuphhD-21.04.a1-zhcn-14.3.6.pet (2 mb)

Traditional Chinese:
upupffD-20.12.02-zhhk-20.0.0s.pet (2 mb)
upupffD-20.12.03-zhhk-20.0.0s.pet (2 mb)
upupggD-20.10.05-zhhk-14.3.6.pet (2 mb)
upuphhD-21.04.a0-zhhk-14.3.6.pet (2 mb)
upuphhD-21.04.a1-zhhk-14.3.6.pet (2 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in UPupFF+D-20.12+2 (please use the 20.0.0s pets), +3; UPupGG+D-20.10+5 (please use the 14.3.6 pets); UPupHH+D-21.04.alpha+0, +1 (please use the 14.3.6 pets)

(b) the name+version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for UPupFF+D-20.12+2, +3; UPupGG+D-20.10+5; UPupHH+D-21.04.alpha+0, +1

for more information about the fcitx, ibus, scim and yong pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

darry19662018 released an update of Dpup Squeeze 5.0.8 D-Lite on Aug 2, 2020

more information and discussions: viewtopic.php?f=119&t=358

download Squeeze-5.08D-lite2020.iso: https://archive.org/download/squeeze-5. ... te2020.iso

I have created 3 half-Chinese language pets for Dpup Squeeze 5.0.8 D-Lite:

fcitx Chinese input platform: fcitx_4.2.0-en-zh-precise-12.2.4.pet (21 mb)

ibus Chinese input platform: ibus cannot run in Dpup Squeeze 5.0.8 D-Lite

scim Chinese input platform: scim_1.4.9-en-zh-precise-12.2.4.pet (25 mb)

yong Chinese input platform: yong3264_20201122-en-zh-precise-12.2.4.pet (14 mb)

Plus 2 Chinese language pets each for Dpup Squeeze 5.0.8 D-Lite:

Simplified Chinese: squeeze-5.0.8lite2020-zhcn-12.2.4.pet (3 mb)

Traditional Chinese: squeeze-5.0.8lite2020-zhhk-12.2.4.pet (3 mb)

To use:
(a) any 1 of the 3 half-Chinese language pets will enable you to display and input Chinese in Dpup Squeeze 5.0.8 D-Lite

(b) the Chinese language pets will give you Simplified Chinese (use zhcn pet) or Traditional Chinese (use zhhk pet) desktop menus, icon labels, tooltips for Dpup Squeeze 5.0.8 D-Lite

for more information about the fcitx, scim and yong half-Chinese pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

01micko released slacko64-8.0-pre-pre-per-alpha on Feb 20, 2021

more information and discussions: viewtopic.php?f=118&t=2199

download slacko64-8.0.iso: http://01micko.com/woof-output-slacko64 ... 64-8.0.iso

I have created 4 half-Chinese language pets for slacko64-8.0-pre-pre-per-alpha:

fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-21.1.1.pet (18 mb)

ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.1.1.pet (32 mb)

scim Chinese input platform: scim64_1.4.9-en-zh-bionic-21.1.1.pet (13 mb)

yong Chinese input platform: yong3264_20201122-en-zh-bionic-21.1.1.pet (9 mb)

Plus 2 Chinese language pets each for slacko64-8.0-pre-pre-per-alpha:
Simplified Chinese: slacko64-8.0.0-zhcn-21.1.1.pet (2 mb)

Traditional Chinese: slacko64-8.0.0-zhhk-21.1.1.pet (2 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in slacko64-8.0-pre-pre-per-alpha

(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pet) or Traditional Chinese (use zhhk pet) desktop menus, icon labels, tooltips for slacko64-8.0-pre-pre-per-alpha

For more information about the fcitx64, ibus，scim64 and yong half-Chinese language pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

josejp2424 released devuanpup-9.6.0-beta6-07022021 on Feb 8, 2021

for more information and discussions: viewtopic.php?f=112&t=2114

download devuanpup-9.6.0-beta6-07022021.iso: https://sourceforge.net/projects/dpup/f ... 022021.iso

I have created 4 half-Chinese language pets for devuanpup-9.6.0-beta6-07022021:

fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-21.0.0.pet (18 mb)

ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.0.0.pet (24 mb)

scim Chinese input platform: scim64_1.4.18-en-zh-bionic-21.0.0.pet (14 mb)

yong Chinese input platform: yong3264_20201122-en-zh-bionic-21.0.0.pet (8 mb)

Plus 2 Chinese language pets each for devuanpup-9.6.0-beta6-07022021:
Simplified Chinese: devuanpup64-9.6.0b607022021-zhcn-21.0.0.pet (2 mb)

Traditional Chinese: devuanpup64-9.6.0b607022021-zhhk-21.0.0.pet (2 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in devuanpup-9.6.0-beta6-07022021

(b) the name+version corresponding Chinese language pets will give you Simplified Chinese (zhcn pet) or Traditional Chinese (zhhk pet) menus, icon labels, tooltips for devuanpup-9.6.0-beta6-07022021

for more information about the fcitx, ibus, scim and yong pets, please see the first posting of this subject

Download addresses for these half-Chinese and Chinese language pets are also available in the first posting of this subject.

pfeco released chimaerapup64-10.0.0-Lite.iso on Sep 9, 2020

more information and discussions: https://skamilinux.hu/phpBB3/viewtopic. ... 9054#p9054

download chimaerapup64-10.0.0-Lite.iso: https://drive.google.com/drive/folders/ ... sp=sharing

I have created 4 half-Chinese language pets for chimaerapup64-10.0.0-Lite:
fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-21.1.2.pet (18 mb)

ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.1.2.pet (32 mb)

scim Chinese input platform: scim64_1.4.18-en-zh-bionic-21.1.2.pet (12 mb)

yong Chinese input platform: yong3264_20201122-en-zh-bionic-21.1.2.pet (8 mb)

Plus 2 Chinese language pets each for chimaerapup64-10.0.0-Lite:
Simplified Chinese: chimaerapup64-10.0.0Lite-zhcn-21.1.2.pet (2 mb)

Traditional Chinese: chimaerapup64-10.0.0Lite-zhhk-21.1.2.pet (2 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in chimaerapup64-10.0.0-Lite

(b) the name+version corresponding Chinese language pets will give you Simplified Chinese (zhcn pet) or Traditional Chinese (zhhk pet) menus, icon labels, tooltips for chimaerapup64-10.0.0-Lite

for more information about the fcitx, ibus, scim and yong pets, please see the first posting of this subject

Download addresses for these half-Chinese and Chinese language pets are also available in the first posting of this subject.

pfeco released chimaerapup-10.2.0-15-Lite.iso on Oct 22, 2020

more information and discussions: https://skamilinux.hu/phpBB3/viewtopic. ... 1&start=69

download chimaerapup-10.2.0-15-Lite.iso: https://drive.google.com/drive/folders/ ... sp=sharing

I have created 4 half-Chinese language pets for chimaerapup-10.2.0-15-Lite:

fcitx Chinese input platform: fcitx_4.2.9-en-zh-bionic-20.0.0a.pet (19 mb)

ibus Chinese input platform: ibus_1.5.17-en-zh-bionic-20.0.0a.pet (29 mb)

scim Chinese input platform: scim_1.4.18-en-zh-bionic-20.0.0a.pet (13 mb)

yong Chinese input platform: yong3264_20201122-en-zh-bionic-20.0.0a.pet (8 mb)

Plus 2 Chinese language pets each for chimaerapup-10.2.0-15-Lite:
Simplified Chinese: chimaerapup-10.2.015Lite-zhcn-20.0.0a.pet (2 mb)

Traditional Chinese: chimaerapup-10.2.015Lite-zhhk-20.0.0a.pet (2 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in chimaerapup-10.2.0-15-Lite

(b) the name+version corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for chimaerapup-10.2.0-15-Lite

for more information about the fcitx, ibus, scim and yong pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders.

pfeco released hirsutepup64-10.2.1-1-Lite.iso on Dec 16, 2020

more information and discussions: https://skamilinux.hu/phpBB3/viewtopic. ... 1&start=75

download hirsutepup64-10.2.1-1-Lite.iso: https://drive.google.com/drive/folders/ ... oFItBYw9rI

I have created 4 half-Chinese language pets for hirsutepup64-10.2.1-1-Lite:

fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-21.1.3.pet (15 mb)

ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.1.3.pet (34 mb)

scim Chinese input platform: scim64_1.4.18-en-zh-bionic-21.1.3.pet (12 mb)

yong Chinese input platform: yong3264_20201122-en-zh-bionic-21.1.3.pet (8 mb)

Plus 2 Chinese language pets each for hirsutepup64-10.2.1-1-Lite:
Simplified Chinese: hirsutepup64-10.2.11Lite-zhcn-21.1.2.pet (2 mb)

Traditional Chinese: hirsutepup64-10.2.11Lite-zhhk-21.1.2.pet (2 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in hirsutepup64-10.2.1-1-Lite

(b) the name+version corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for hirsutepup64-10.2.1-1-Lite

for more information about the fcitx, ibus, scim and yong pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders.