Puppy Linux Discussion Forum

Posted: **Mon Jun 06, 2022 7:00 pm**

fredx181 wrote: ↑Fri Jun 03, 2022 8:09 pm
I've found that it's not because of the arecord command that I got these dropouts, tried with ffmpeg (with content of .asoundrc.capture) and got the same problem.
Changing to another .asoundrc config solved it for me (and still use arecord).
Here's a modification of your package (changed /root/.asoundrc.capture and in the alsa-capture script changed to "-D looprec"):
EDIT: Fixed warning from arecord, new package 1.1 :
EDIT2: fixed that it didn't reset back to original .asoundrc and added choice for soundcard to record from, v1.2:
alsa-cap_1.2_all.deb.gz
Other advantage IMO is also that it doesn't mute the audio play during recording.

I was able to record audio while playing youtube videos, with this script

https://forum.puppylinux.com/viewtopic. ... 764#p58764

but I tried to record audio output from a text to speech program working thanks to wine and ended up only with a silent track

Posted: **Mon Jun 06, 2022 7:48 pm**

Alsa-capture v1.2 is posted here. Please read the new Notes section.

@Dingo: I cannot tell from your post what script you are talking about and what it has to do with this project.

Also, I wonder if wine can deal with the ALSA-specific techniques that are used here. For example, wine would need to recognize that the default sound card is now a virtual device named Capture.

Posted: **Mon Jun 06, 2022 11:39 pm**

rcrsn51 wrote: ↑Mon Jun 06, 2022 7:48 pm
Alsa-capture v1.2 is posted here. Please read the new Notes section.

@Dingo: I cannot tell from your post what script you are talking about and what it has to do with this project.

Also, I wonder if wine can deal with the ALSA-specific techniques that are used here. For example, wine would need to recognize that the default sound card is now a virtual device named Capture.

Sorry. I fixed my post. The script is this
https://forum.puppylinux.com/viewtopic. ... 764#p58764

Posted: **Tue Jun 07, 2022 11:19 am**

Thanks.

I don't know anything about how wine integrates with ALSA. Does it simply send audio to the default output device as declared in ALSA? Or does wine have some kind of audio setup?

When you ran your text to speech program and tried to record it, did you see the vumeter moving? Did the alsa-capture.mp3 file have non-zero size?

[Update] I set up wine with the audacious audio player. Under winecfg, I left the audio settings on the defaults. I started alsa-capture. I started wine+audacious. I started the capture. It worked properly. I terminated everything. I played the alsa-capture.mp3. It was correct.

Look in your text-speech app and see if it has specific audio settings.

Posted: **Thu Jun 09, 2022 10:24 am**

No reply from Dingo.

Posted: **Thu Jun 09, 2022 3:55 pm**

I tested also with wine, using audio source from "foobar2000" audio player for Windows and capturing went OK with rcrsn51's alsa-capture as well with my "alsa-cap" mod.
In the foobar2000 settings, the audio output set as "primary sound driver".

Posted: **Fri Jun 10, 2022 1:03 pm**

Still no reply from Dingo. At least we have now confirmed that ALSA recording works with Wine. I have some ideas about why Dingo's particular situation failed, but I have other things to do now.

Posted: **Fri Jun 10, 2022 7:55 pm**

rcrsn51 wrote: ↑Tue Jun 07, 2022 11:19 am
Thanks.

I don't know anything about how wine integrates with ALSA. Does it simply send audio to the default output device as declared in ALSA? Or does wine have some kind of audio setup?

When you ran your text to speech program and tried to record it, did you see the vumeter moving? Did the alsa-capture.mp3 file have non-zero size?

[Update] I set up wine with the audacious audio player. Under winecfg, I left the audio settings on the defaults. I started alsa-capture. I started wine+audacious. I started the capture. It worked properly. I terminated everything. I played the alsa-capture.mp3. It was correct.

Look in your text-speech app and see if it has specific audio settings.

sorry for delay.

starting alsa-capture script, I got

Code: Select all

alsa-capture 
Start the audio player ...
Press Enter to start capturing: playback hw:0,0 open error: No such file or directory
Loopback initialization failure.

I had to change, on my laptop, thinkpad L440, the content of

Code: Select all

/root/.alsa-capture

from

Code: Select all

hw:0,0

to

Code: Select all

hw:1,0

and, so, I seen that starting the vumeter bar when I started my text to speech app with wine

deadbeef, however, seems not working anymore once I installed alsa-capture script, since it seems unable to play sound files

Posted: **Fri Jun 10, 2022 8:07 pm**

From the instructions:
If your ALSA system gets confused, manually copy /root/.asound.reset back to .asoundrc. Or just delete .asoundrc.

Did your original .asoundrc point to hw:1,0? Did you set this with the multiple sound card wizard?

seems unable to play sound files

I don't understand. Either it can play or it cannot.

Posted: **Fri Jun 10, 2022 8:55 pm**

rcrsn51 wrote: ↑Fri Jun 10, 2022 8:07 pm
From the instructions:
If your ALSA system gets confused, manually copy /root/.asound.reset back to .asoundrc. Or just delete .asoundrc.

Did your original .asoundrc point to hw:1,0? Did you set this with the multiple sound card wizard?

I used mutiple sound card wizard
this is the content of /root/.asoundrc.reset

Code: Select all

defaults.pcm.card 0
defaults.pcm.device 0
defaults.ctl.card 0

I deleted .asoundrc, but I'm still unable to playing any audio

rcrsn51 wrote: ↑Fri Jun 10, 2022 8:07 pm

seems unable to play sound files

I don't understand. Either it can play or it cannot.

Oh, gosh, sorry for being so dummy; I mean it is no playing at all, trying to open the same file with mwaedit, i get

Code: Select all

Error opening ALSA device 'default' for playback: No such file or directory

Posted: **Fri Jun 10, 2022 10:02 pm**

What device is card 1 - a USB sound card?

Run the multiple sound card wizard and get back to the correct settings. Once you delete /root/ .asoundrc, you should be back on your regular config file /etc/asound.conf.

What are the correct settings?

Make sure that your Deadbeef preferences are selecting the right card.

Posted: **Sun Jun 12, 2022 11:42 am**

Alsa-capture v1.4 is posted here. This version is compatible with Puppy's /etc/asound.conf config file. To use this feature, delete your current /root/.asoundrc file.

Posted: **Sun Jun 12, 2022 4:24 pm**

rcrsn51 wrote:
This version is compatible with Puppy's /etc/asound.conf config file.

Just trying to understand, how can this work if /etc/asound.conf doesn't contain the special config for Loopback capture ?

Posted: **Sun Jun 12, 2022 4:53 pm**

fredx181 wrote: ↑Sun Jun 12, 2022 4:24 pm
Just trying to understand, how can this work if /etc/asound.conf doesn't contain the special config for Loopback capture ?

Because the script copies /etc/asound.conf to /root/.asoundrc if the first file exists and the second does not.

Suppose a Puppy user has an asound.conf file that sets the default to a device other than hw:0,0. When they start using alsa-capture, their playback will be broken because the script sets the default to hw:0,0 if .asoundrc does not exist yet. V1.4 solves this problem.

I suspect that's what happened to Dingo.

Posted: **Sun Jun 12, 2022 8:06 pm**

rcrsn51 wrote: ↑Sun Jun 12, 2022 4:53 pm
fredx181 wrote: ↑Sun Jun 12, 2022 4:24 pm
Just trying to understand, how can this work if /etc/asound.conf doesn't contain the special config for Loopback capture ?

Because the script copies /etc/asound.conf to /root/.asoundrc if the first file exists and the second does not.

Suppose a Puppy user has an asound.conf file that sets the default to a device other than hw:0,0. When they start using alsa-capture, their playback will be broken because the script sets the default to hw:0,0 if .asoundrc does not exist yet. V1.4 solves this problem.

I suspect that's what happened to Dingo.

in fact my /etc/asound.conf content, on my notebook lenovo thinkpad L440, was

Code: Select all

defaults.pcm.card 1
defaults.pcm.device 0
defaults.ctl.card 1

from pupsysinfo

Code: Select all

Audio device [0403]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller [8086:0c0c] (rev 06)
• Kernel Driver: snd_hda_intel
--
Audio device [0403]: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller [8086:8c20] (rev 05)
• Kernel Driver: snd_hda_intel
• Memory Used: 21.54 KB
• Path: /lib/modules/4.9.58/kernel/sound/pci/hda/snd-hda-intel.ko
• Description: Intel HDA driver

Audio device [0403]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller [8086:0c0c] (rev 06)
• Kernel Driver: snd_hda_intel
--
Audio device [0403]: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller [8086:8c20] (rev 05)
• Kernel Driver: snd_hda_intel
• Memory Used: 21.54 KB
• Path: /lib/modules/4.9.58/kernel/sound/pci/hda/snd-hda-intel.ko
• Description: Intel HDA driver

!!################################
!!ALSA Information Script v 0.4.64
!!################################

!!Script ran on: Sun Jun 12 20:04:42 UTC 2022


!!Linux Distribution
!!------------------

xenialpup64 Linux Linux 4.9.58 [x86_64 arch] NAME=Puppy ID=puppy_xenialpup64 PRETTY_NAME="xenialpup64 7.5" CPE_NAME="cpe:/o:puppy:puppy_linux:7.5" HOME_URL="http://puppylinux.com/" SUPPORT_URL="http://www.murga-linux.com/puppy/index.php" BUG_REPORT_URL="https://github.com/puppylinux-woof-CE/woof-CE"


!!DMI Information
!!---------------

Manufacturer:      LENOVO
Product Name:      20ASS1X900
Product Version:   ThinkPad L440
Firmware Version:  J4ET89WW(1.89)


!!Kernel Information
!!------------------

Kernel release:    4.9.58
Operating System:  GNU/Linux
Architecture:      x86_64
Processor:         x86_64
SMP Enabled:       Yes


!!ALSA Version
!!------------

Driver version:     k4.9.58
Library version:    
Utilities version:  1.1.0


!!Loaded ALSA modules
!!-------------------

snd_hda_intel
snd_hda_intel
snd_pcsp


!!Sound Servers on this system
!!----------------------------

No sound servers found.


!!Soundcards recognised by ALSA
!!-----------------------------

 0 [HDMI           ]: HDA-Intel - HDA Intel HDMI
                      HDA Intel HDMI at 0xf2530000 irq 31
 1 [PCH            ]: HDA-Intel - HDA Intel PCH
                      HDA Intel PCH at 0xf2534000 irq 28
 2 [pcsp           ]: PC-Speaker - pcsp
                      Internal PC-Speaker at port 0x61


!!PCI Soundcards installed in the system
!!--------------------------------------

00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06)
00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 05)


!!Advanced information - PCI Vendor/Device/Subsystem ID's
!!-------------------------------------------------------

00:03.0 0403: 8086:0c0c (rev 06)
	Subsystem: 17aa:501e
--
00:1b.0 0403: 8086:8c20 (rev 05)
	Subsystem: 17aa:501e


!!Modprobe options (Sound related)
!!--------------------------------

snd_pcsp: index=-2
snd_usb_audio: index=-2
snd_atiixp_modem: index=-2
snd_intel8x0m: index=-2
snd_via82xx_modem: index=-2
snd_atiixp_modem: index=-2
snd_intel8x0m: index=-2
snd_via82xx_modem: index=-2
snd_usb_audio: index=-2
snd_usb_caiaq: index=-2
snd_usb_ua101: index=-2
snd_usb_us122l: index=-2
snd_usb_usx2y: index=-2
snd_cmipci: mpu_port=0x330 fm_port=0x388
snd_pcsp: index=-2
snd_usb_audio: index=-2


!!Loaded sound module options
!!---------------------------

!!Module: snd_hda_intel
	align_buffer_size : -1
	bdl_pos_adj : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
	beep_mode : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
	enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
	enable_msi : -1
	id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
	index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
	jackpoll_ms : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
	model : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
	patch : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
	position_fix : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
	power_save : 0
	power_save_controller : Y
	probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
	probe_only : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
	single_cmd : N
	snoop : -1

!!Module: snd_hda_intel
	align_buffer_size : -1
	bdl_pos_adj : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
	beep_mode : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
	enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
	enable_msi : -1
	id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
	index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
	jackpoll_ms : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
	model : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
	patch : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
	position_fix : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
	power_save : 0
	power_save_controller : Y
	probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
	probe_only : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
	single_cmd : N
	snoop : -1

!!Module: snd_pcsp
	enable : Y
	id : (null)
	index : -2
	nforce_wa : N
	nopcm : N


!!HDA-Intel Codec information
!!---------------------------
--startcollapse--

Codec: Intel Haswell HDMI
Address: 0
AFG Function Id: 0x1 (unsol 0)
Vendor Id: 0x80862807
Subsystem Id: 0x80860101
Revision Id: 0x100000
No Modem Function Group found
Default PCM:
    rates [0x0]:
    bits [0x0]:
    formats [0x0]:
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
State of AFG node 0x01:
  Power states:  D0 D3 CLKSTOP EPSS
  Power: setting=D0, actual=D0, Clock-stop-OK
GPIO: io=0, o=0, i=0, unsolicited=0, wake=0
Node 0x02 [Audio Output] wcaps 0x6611: 8-Channels Digital
  Converter: stream=0, channel=0
  Digital: Enabled KAE
  Digital category: 0x0
  IEC Coding Type: 0x0
  PCM:
    rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
    bits [0x1e]: 16 20 24 32
    formats [0x5]: PCM AC3
  Power states:  D0 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x03 [Audio Output] wcaps 0x6611: 8-Channels Digital
  Converter: stream=0, channel=0
  Digital: Enabled KAE
  Digital category: 0x0
  IEC Coding Type: 0x0
  PCM:
    rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
    bits [0x1e]: 16 20 24 32
    formats [0x5]: PCM AC3
  Power states:  D0 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x04 [Audio Output] wcaps 0x6611: 8-Channels Digital
  Converter: stream=0, channel=0
  Digital: Enabled KAE
  Digital category: 0x0
  IEC Coding Type: 0x0
  PCM:
    rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
    bits [0x1e]: 16 20 24 32
    formats [0x5]: PCM AC3
  Power states:  D0 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x05 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
  Control: name="IEC958 Playback Con Mask", index=0, device=0
  Control: name="IEC958 Playback Pro Mask", index=0, device=0
  Control: name="IEC958 Playback Default", index=0, device=0
  Control: name="IEC958 Playback Switch", index=0, device=0
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x00 0x00]
  Pincap 0x0b000094: OUT Detect HBR HDMI DP
  Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
    Conn = Digital, Color = Unknown
    DefAssociation = 0x1, Sequence = 0x0
  Pin-ctls: 0x00:
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D3 EPSS
  Power: setting=D0, actual=D0
  Devices: 0
  Connection: 0
  In-driver Connection: 3
     0x02 0x03 0x04
Node 0x06 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
  Control: name="IEC958 Playback Con Mask", index=1, device=0
  Control: name="IEC958 Playback Pro Mask", index=1, device=0
  Control: name="IEC958 Playback Default", index=1, device=0
  Control: name="IEC958 Playback Switch", index=1, device=0
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x00 0x00]
  Pincap 0x0b000094: OUT Detect HBR HDMI DP
  Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
    Conn = Digital, Color = Unknown
    DefAssociation = 0x1, Sequence = 0x0
  Pin-ctls: 0x00:
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D3 EPSS
  Power: setting=D0, actual=D0
  Devices: 0
  Connection: 0
  In-driver Connection: 3
     0x02 0x03 0x04
Node 0x07 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
  Control: name="IEC958 Playback Con Mask", index=2, device=0
  Control: name="IEC958 Playback Pro Mask", index=2, device=0
  Control: name="IEC958 Playback Default", index=2, device=0
  Control: name="IEC958 Playback Switch", index=2, device=0
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x00 0x00]
  Pincap 0x0b000094: OUT Detect HBR HDMI DP
  Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
    Conn = Digital, Color = Unknown
    DefAssociation = 0x1, Sequence = 0x0
  Pin-ctls: 0x00:
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D3 EPSS
  Power: setting=D0, actual=D0
  Devices: 0
  Connection: 0
  In-driver Connection: 3
     0x02 0x03 0x04
Node 0x08 [Vendor Defined Widget] wcaps 0xf00000: Mono
Codec: Realtek ALC3232
Address: 0
AFG Function Id: 0x1 (unsol 1)
Vendor Id: 0x10ec0292
Subsystem Id: 0x17aa501e
Revision Id: 0x100001
No Modem Function Group found
Default PCM:
    rates [0x5f0]: 32000 44100 48000 88200 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
State of AFG node 0x01:
  Power states:  D0 D1 D2 D3 CLKSTOP EPSS
  Power: setting=D0, actual=D0
GPIO: io=5, o=0, i=0, unsolicited=1, wake=0
  IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
  IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
  IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
  IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
  IO[4]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Node 0x02 [Audio Output] wcaps 0x41d: Stereo Amp-Out
  Control: name="Speaker Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Device: name="ALC3232 Analog", type="Audio", device=0
  Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0
  Amp-Out vals:  [0x42 0x42]
  Converter: stream=5, channel=0
  PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x03 [Audio Output] wcaps 0x41d: Stereo Amp-Out
  Control: name="Headphone Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0
  Amp-Out vals:  [0x35 0x35]
  Converter: stream=5, channel=0
  PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x04 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x05 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x06 [Audio Output] wcaps 0x611: Stereo Digital
  Converter: stream=0, channel=0
  Digital:
  Digital category: 0x0
  IEC Coding Type: 0x0
  PCM:
    rates [0x5f0]: 32000 44100 48000 88200 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x07 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x08 [Audio Input] wcaps 0x10051b: Stereo Amp-In
  Amp-In caps: ofs=0x17, nsteps=0x3f, stepsize=0x02, mute=1
  Amp-In vals:  [0x97 0x97]
  Converter: stream=0, channel=0
  SDI-Select: 0
  PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 1
     0x23
Node 0x09 [Audio Input] wcaps 0x10051b: Stereo Amp-In
  Control: name="Capture Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Control: name="Capture Switch", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Device: name="ALC3232 Analog", type="Audio", device=0
  Amp-In caps: ofs=0x17, nsteps=0x3f, stepsize=0x02, mute=1
  Amp-In vals:  [0x1b 0x1b]
  Converter: stream=0, channel=0
  SDI-Select: 0
  PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 1
     0x22
Node 0x0a [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
  Control: name="Dock Mic Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=1, ofs=0
  Control: name="Dock Mic Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=1, ofs=0
  Control: name="Mic Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=2, ofs=0
  Control: name="Mic Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=2, ofs=0
  Control: name="Beep Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=4, ofs=0
  Control: name="Beep Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=4, ofs=0
  Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
  Amp-In vals:  [0x80 0x80] [0x88 0x88] [0x13 0x13] [0x80 0x80] [0x06 0x06]
  Connection: 5
     0x18 0x19 0x1a 0x1b 0x1d
Node 0x0c [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x00 0x00] [0x00 0x00]
  Connection: 2
     0x02 0x0b
Node 0x0d [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x00 0x00] [0x00 0x00]
  Connection: 2
     0x03 0x0b
Node 0x0e [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0f [Audio Mixer] wcaps 0x20010a: Mono Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x80] [0x00]
  Connection: 2
     0x02 0x03
Node 0x10 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x11 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x12 [Pin Complex] wcaps 0x40040b: Stereo Amp-In
  Control: name="Internal Mic Boost Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0
  Amp-In vals:  [0x00 0x00]
  Pincap 0x00000020: IN
  Pin Default 0x90a60130: [Fixed] Mic at Int N/A
    Conn = Digital, Color = Unknown
    DefAssociation = 0x3, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x20: IN
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x13 [Pin Complex] wcaps 0x40040b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0
  Amp-In vals:  [0x00 0x00]
  Pincap 0x00000020: IN
  Pin Default 0x40000000: [N/A] Line Out at Ext N/A
    Conn = Unknown, Color = Unknown
    DefAssociation = 0x0, Sequence = 0x0
  Pin-ctls: 0x00:
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x14 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
  Control: name="Speaker Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x00 0x00]
  Pincap 0x00010010: OUT EAPD
  EAPD 0x2: EAPD
  Pin Default 0x90170110: [Fixed] Speaker at Int N/A
    Conn = Analog, Color = Unknown
    DefAssociation = 0x1, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x40: OUT
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 2
     0x0c* 0x0d
Node 0x15 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
  Control: name="Headphone Playback Switch", index=1, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x00 0x00]
  Pincap 0x0001001c: OUT HP EAPD Detect
  EAPD 0x2: EAPD
  Pin Default 0x0321101f: [Jack] HP Out at Ext Left
    Conn = 1/8, Color = Black
    DefAssociation = 0x1, Sequence = 0xf
  Pin-ctls: 0xc0: OUT HP
  Unsolicited: tag=02, enabled=1
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 2
     0x0c 0x0d*
Node 0x16 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
  Control: name="Headphone Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x00 0x00]
  Pincap 0x0001001c: OUT HP EAPD Detect
  EAPD 0x2: EAPD
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0xc0: OUT HP
  Unsolicited: tag=01, enabled=1
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 2
     0x0c 0x0d*
Node 0x17 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x18 [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00]
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x00003734: IN OUT Detect
    Vref caps: HIZ 50 GRD 80 100
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x20: IN VREF_HIZ
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 2
     0x0c* 0x0d
Node 0x19 [Pin Complex] wcaps 0x40048b: Stereo Amp-In
  Control: name="Dock Mic Boost Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0
  Amp-In vals:  [0x01 0x01]
  Pincap 0x00000024: IN Detect
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x20: IN
  Unsolicited: tag=03, enabled=1
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x1a [Pin Complex] wcaps 0x40048b: Stereo Amp-In
  Control: name="Mic Boost Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x01 0x01]
  Pincap 0x00003724: IN Detect
    Vref caps: HIZ 50 GRD 80 100
  Pin Default 0x03a11020: [Jack] Mic at Ext Left
    Conn = 1/8, Color = Black
    DefAssociation = 0x2, Sequence = 0x0
  Pin-ctls: 0x24: IN VREF_80
  Unsolicited: tag=04, enabled=1
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x1b [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00]
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x00003734: IN OUT Detect
    Vref caps: HIZ 50 GRD 80 100
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x20: IN VREF_HIZ
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 2
     0x0c* 0x0d
Node 0x1c [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x1d [Pin Complex] wcaps 0x400400: Mono
  Pincap 0x00000020: IN
  Pin Default 0x40738105: [N/A] Modem Hand at Ext N/A
    Conn = ATAPI, Color = Purple
    DefAssociation = 0x0, Sequence = 0x5
    Misc = NO_PRESENCE
  Pin-ctls: 0x20: IN
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x1e [Pin Complex] wcaps 0x400781: Stereo Digital
  Pincap 0x00000014: OUT Detect
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x40: OUT
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 1
     0x06
Node 0x1f [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono
  Processing caps: benign=0, ncoeff=124
Node 0x21 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x22 [Audio Selector] wcaps 0x300101: Stereo
  Connection: 8
     0x18 0x19 0x1a 0x1b 0x1d 0x0b 0x12* 0x13
Node 0x23 [Audio Selector] wcaps 0x300101: Stereo
  Connection: 6
     0x18* 0x19 0x1a 0x1b 0x1d 0x0b
Node 0x24 [Vendor Defined Widget] wcaps 0xf00000: Mono
--endcollapse--


!!ALSA Device nodes
!!-----------------

crw-rw---- 1 root audio 116,  8 Jun 12  2022 /dev/snd/controlC0
crw-rw---- 1 root audio 116,  2 Jun 12  2022 /dev/snd/controlC1
crw-rw---- 1 root audio 116,  6 Jun 12  2022 /dev/snd/controlC2
crw-rw---- 1 root audio 116, 12 Jun 12  2022 /dev/snd/hwC0D0
crw-rw---- 1 root audio 116,  5 Jun 12  2022 /dev/snd/hwC1D0
crw-rw---- 1 root audio 116,  9 Jun 12  2022 /dev/snd/pcmC0D3p
crw-rw---- 1 root audio 116, 10 Jun 12  2022 /dev/snd/pcmC0D7p
crw-rw---- 1 root audio 116, 11 Jun 12  2022 /dev/snd/pcmC0D8p
crw-rw---- 1 root audio 116,  4 Jun 12  2022 /dev/snd/pcmC1D0c
crw-rw---- 1 root audio 116,  3 Jun 12 21:56 /dev/snd/pcmC1D0p
crw-rw---- 1 root audio 116,  7 Jun 12  2022 /dev/snd/pcmC2D0p
crw-rw---- 1 root audio 116,  1 Jun 12  2022 /dev/snd/seq
crw-rw---- 1 root audio 116, 33 Jun 12  2022 /dev/snd/timer

/dev/snd/by-path:
total 0
drwxr-xr-x 2 root root 100 Jun 12  2022 .
drwxr-xr-x 3 root root 320 Jun 12  2022 ..
lrwxrwxrwx 1 root root  12 Jun 12  2022 pci-0000:00:03.0 -> ../controlC0
lrwxrwxrwx 1 root root  12 Jun 12  2022 pci-0000:00:1b.0 -> ../controlC1
lrwxrwxrwx 1 root root  12 Jun 12  2022 platform-pcspkr -> ../controlC2


!!ALSA configuration files
!!------------------------

!!System wide config file (/etc/asound.conf)

defaults.pcm.card 1
defaults.pcm.device 0
defaults.ctl.card 1


!!Aplay/Arecord output
!!--------------------

APLAY

**** List of PLAYBACK Hardware Devices ****
card 0: HDMI [HDA Intel HDMI], device 3: HDMI 0 [HDMI 0]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: HDMI [HDA Intel HDMI], device 7: HDMI 1 [HDMI 1]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: HDMI [HDA Intel HDMI], device 8: HDMI 2 [HDMI 2]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: PCH [HDA Intel PCH], device 0: ALC3232 Analog [ALC3232 Analog]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 2: pcsp [pcsp], device 0: pcspeaker [pcsp]
  Subdevices: 1/1
  Subdevice #0: subdevice #0

ARECORD

**** List of CAPTURE Hardware Devices ****
card 1: PCH [HDA Intel PCH], device 0: ALC3232 Analog [ALC3232 Analog]
  Subdevices: 1/1
  Subdevice #0: subdevice #0

!!Amixer output
!!-------------

!!-------Mixer controls for card 0 [HDMI]

Card hw:0 'HDMI'/'HDA Intel HDMI at 0xf2530000 irq 31'
  Mixer name	: 'Intel Haswell HDMI'
  Components	: 'HDA:80862807,80860101,00100000'
  Controls      : 21
  Simple ctrls  : 3
Simple mixer control 'IEC958',0
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [on]
Simple mixer control 'IEC958',1
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [on]
Simple mixer control 'IEC958',2
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [on]

!!-------Mixer controls for card 1 [PCH]

Card hw:1 'PCH'/'HDA Intel PCH at 0xf2534000 irq 28'
  Mixer name	: 'Realtek ALC3232'
  Components	: 'HDA:10ec0292,17aa501e,00100001'
  Controls      : 30
  Simple ctrls  : 15
Simple mixer control 'Master',0
  Capabilities: pvolume pvolume-joined pswitch pswitch-joined
  Playback channels: Mono
  Limits: Playback 0 - 87
  Mono: Playback 66 [76%] [-15.75dB] [on]
Simple mixer control 'Headphone',0
  Capabilities: pvolume pswitch
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 87
  Mono:
  Front Left: Playback 74 [85%] [-9.75dB] [on]
  Front Right: Playback 74 [85%] [-9.75dB] [on]
Simple mixer control 'Headphone',1
  Capabilities: pswitch
  Playback channels: Front Left - Front Right
  Mono:
  Front Left: Playback [on]
  Front Right: Playback [on]
Simple mixer control 'Speaker',0
  Capabilities: pvolume pswitch
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 87
  Mono:
  Front Left: Playback 87 [100%] [0.00dB] [on]
  Front Right: Playback 87 [100%] [0.00dB] [on]
Simple mixer control 'PCM',0
  Capabilities: pvolume
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 255
  Mono:
  Front Left: Playback 255 [100%] [0.00dB]
  Front Right: Playback 255 [100%] [0.00dB]
Simple mixer control 'Mic',0
  Capabilities: pvolume pswitch
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 31
  Mono:
  Front Left: Playback 19 [61%] [-6.00dB] [on]
  Front Right: Playback 19 [61%] [-6.00dB] [on]
Simple mixer control 'Mic Boost',0
  Capabilities: volume
  Playback channels: Front Left - Front Right
  Capture channels: Front Left - Front Right
  Limits: 0 - 3
  Front Left: 1 [33%] [10.00dB]
  Front Right: 1 [33%] [10.00dB]
Simple mixer control 'Beep',0
  Capabilities: pvolume pswitch
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 31
  Mono:
  Front Left: Playback 6 [19%] [-25.50dB] [on]
  Front Right: Playback 6 [19%] [-25.50dB] [on]
Simple mixer control 'Capture',0
  Capabilities: cvolume cswitch
  Capture channels: Front Left - Front Right
  Limits: Capture 0 - 63
  Front Left: Capture 27 [43%] [3.00dB] [on]
  Front Right: Capture 27 [43%] [3.00dB] [on]
Simple mixer control 'Auto-Mute Mode',0
  Capabilities: enum
  Items: 'Disabled' 'Enabled'
  Item0: 'Enabled'
Simple mixer control 'Digital',0
  Capabilities: cvolume
  Capture channels: Front Left - Front Right
  Limits: Capture 0 - 120
  Front Left: Capture 67 [56%] [3.50dB]
  Front Right: Capture 67 [56%] [3.50dB]
Simple mixer control 'Dock Mic',0
  Capabilities: pvolume pswitch
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 31
  Mono:
  Front Left: Playback 8 [26%] [-22.50dB] [off]
  Front Right: Playback 8 [26%] [-22.50dB] [off]
Simple mixer control 'Dock Mic Boost',0
  Capabilities: volume
  Playback channels: Front Left - Front Right
  Capture channels: Front Left - Front Right
  Limits: 0 - 3
  Front Left: 1 [33%] [12.00dB]
  Front Right: 1 [33%] [12.00dB]
Simple mixer control 'Internal Mic Boost',0
  Capabilities: volume
  Playback channels: Front Left - Front Right
  Capture channels: Front Left - Front Right
  Limits: 0 - 1
  Front Left: 0 [0%] [0.00dB]
  Front Right: 0 [0%] [0.00dB]
Simple mixer control 'Loopback Mixing',0
  Capabilities: enum
  Items: 'Disabled' 'Enabled'
  Item0: 'Enabled'

!!-------Mixer controls for card 2 [pcsp]

Card hw:2 'pcsp'/'Internal PC-Speaker at port 0x61'
  Mixer name	: 'PC-Speaker'
  Components	: ''
  Controls      : 3
  Simple ctrls  : 3
Simple mixer control 'Master',0
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [on]
Simple mixer control 'Beep',0
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [on]
Simple mixer control 'BaseFRQ',0
  Capabilities: penum
  Items: '18643' '37286'
  Item0: '18643'


!!Alsactl output
!!--------------

--startcollapse--
state.HDMI {
	control.1 {
		iface CARD
		name 'HDMI/DP,pcm=3 Jack'
		value false
		comment {
			access read
			type BOOLEAN
			count 1
		}
	}
	control.2 {
		iface MIXER
		name 'IEC958 Playback Con Mask'
		value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
		comment {
			access read
			type IEC958
			count 1
		}
	}
	control.3 {
		iface MIXER
		name 'IEC958 Playback Pro Mask'
		value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
		comment {
			access read
			type IEC958
			count 1
		}
	}
	control.4 {
		iface MIXER
		name 'IEC958 Playback Default'
		value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
		comment {
			access 'read write'
			type IEC958
			count 1
		}
	}
	control.5 {
		iface MIXER
		name 'IEC958 Playback Switch'
		value true
		comment {
			access 'read write'
			type BOOLEAN
			count 1
		}
	}
	control.6 {
		iface PCM
		device 3
		name ELD
		value ''
		comment {
			access 'read volatile'
			type BYTES
			count 0
		}
	}
	control.7 {
		iface CARD
		name 'HDMI/DP,pcm=7 Jack'
		value false
		comment {
			access read
			type BOOLEAN
			count 1
		}
	}
	control.8 {
		iface MIXER
		name 'IEC958 Playback Con Mask'
		index 1
		value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
		comment {
			access read
			type IEC958
			count 1
		}
	}
	control.9 {
		iface MIXER
		name 'IEC958 Playback Pro Mask'
		index 1
		value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
		comment {
			access read
			type IEC958
			count 1
		}
	}
	control.10 {
		iface MIXER
		name 'IEC958 Playback Default'
		index 1
		value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
		comment {
			access 'read write'
			type IEC958
			count 1
		}
	}
	control.11 {
		iface MIXER
		name 'IEC958 Playback Switch'
		index 1
		value true
		comment {
			access 'read write'
			type BOOLEAN
			count 1
		}
	}
	control.12 {
		iface PCM
		device 7
		name ELD
		value ''
		comment {
			access 'read volatile'
			type BYTES
			count 0
		}
	}
	control.13 {
		iface CARD
		name 'HDMI/DP,pcm=8 Jack'
		value false
		comment {
			access read
			type BOOLEAN
			count 1
		}
	}
	control.14 {
		iface MIXER
		name 'IEC958 Playback Con Mask'
		index 2
		value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
		comment {
			access read
			type IEC958
			count 1
		}
	}
	control.15 {
		iface MIXER
		name 'IEC958 Playback Pro Mask'
		index 2
		value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
		comment {
			access read
			type IEC958
			count 1
		}
	}
	control.16 {
		iface MIXER
		name 'IEC958 Playback Default'
		index 2
		value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
		comment {
			access 'read write'
			type IEC958
			count 1
		}
	}
	control.17 {
		iface MIXER
		name 'IEC958 Playback Switch'
		index 2
		value true
		comment {
			access 'read write'
			type BOOLEAN
			count 1
		}
	}
	control.18 {
		iface PCM
		device 8
		name ELD
		value ''
		comment {
			access 'read volatile'
			type BYTES
			count 0
		}
	}
	control.19 {
		iface PCM
		device 3
		name 'Playback Channel Map'
		value.0 0
		value.1 0
		value.2 0
		value.3 0
		value.4 0
		value.5 0
		value.6 0
		value.7 0
		comment {
			access 'read write'
			type INTEGER
			count 8
			range '0 - 36'
		}
	}
	control.20 {
		iface PCM
		device 7
		name 'Playback Channel Map'
		value.0 0
		value.1 0
		value.2 0
		value.3 0
		value.4 0
		value.5 0
		value.6 0
		value.7 0
		comment {
			access 'read write'
			type INTEGER
			count 8
			range '0 - 36'
		}
	}
	control.21 {
		iface PCM
		device 8
		name 'Playback Channel Map'
		value.0 0
		value.1 0
		value.2 0
		value.3 0
		value.4 0
		value.5 0
		value.6 0
		value.7 0
		comment {
			access 'read write'
			type INTEGER
			count 8
			range '0 - 36'
		}
	}
}
state.PCH {
	control.1 {
		iface MIXER
		name 'Speaker Playback Volume'
		value.0 87
		value.1 87
		comment {
			access 'read write'
			type INTEGER
			count 2
			range '0 - 87'
			dbmin -6525
			dbmax 0
			dbvalue.0 0
			dbvalue.1 0
		}
	}
	control.2 {
		iface MIXER
		name 'Speaker Playback Switch'
		value.0 true
		value.1 true
		comment {
			access 'read write'
			type BOOLEAN
			count 2
		}
	}
	control.3 {
		iface MIXER
		name 'Headphone Playback Volume'
		value.0 74
		value.1 74
		comment {
			access 'read write'
			type INTEGER
			count 2
			range '0 - 87'
			dbmin -6525
			dbmax 0
			dbvalue.0 -975
			dbvalue.1 -975
		}
	}
	control.4 {
		iface MIXER
		name 'Headphone Playback Switch'
		value.0 true
		value.1 true
		comment {
			access 'read write'
			type BOOLEAN
			count 2
		}
	}
	control.5 {
		iface MIXER
		name 'Headphone Playback Switch'
		index 1
		value.0 true
		value.1 true
		comment {
			access 'read write'
			type BOOLEAN
			count 2
		}
	}
	control.6 {
		iface MIXER
		name 'Loopback Mixing'
		value Enabled
		comment {
			access 'read write'
			type ENUMERATED
			count 1
			item.0 Disabled
			item.1 Enabled
		}
	}
	control.7 {
		iface MIXER
		name 'Dock Mic Playback Volume'
		value.0 8
		value.1 8
		comment {
			access 'read write'
			type INTEGER
			count 2
			range '0 - 31'
			dbmin -3450
			dbmax 1200
			dbvalue.0 -2250
			dbvalue.1 -2250
		}
	}
	control.8 {
		iface MIXER
		name 'Dock Mic Playback Switch'
		value.0 false
		value.1 false
		comment {
			access 'read write'
			type BOOLEAN
			count 2
		}
	}
	control.9 {
		iface MIXER
		name 'Mic Playback Volume'
		value.0 19
		value.1 19
		comment {
			access 'read write'
			type INTEGER
			count 2
			range '0 - 31'
			dbmin -3450
			dbmax 1200
			dbvalue.0 -600
			dbvalue.1 -600
		}
	}
	control.10 {
		iface MIXER
		name 'Mic Playback Switch'
		value.0 true
		value.1 true
		comment {
			access 'read write'
			type BOOLEAN
			count 2
		}
	}
	control.11 {
		iface MIXER
		name 'Auto-Mute Mode'
		value Enabled
		comment {
			access 'read write'
			type ENUMERATED
			count 1
			item.0 Disabled
			item.1 Enabled
		}
	}
	control.12 {
		iface MIXER
		name 'Capture Volume'
		value.0 27
		value.1 27
		comment {
			access 'read write'
			type INTEGER
			count 2
			range '0 - 63'
			dbmin -1725
			dbmax 3000
			dbvalue.0 300
			dbvalue.1 300
		}
	}
	control.13 {
		iface MIXER
		name 'Capture Switch'
		value.0 true
		value.1 true
		comment {
			access 'read write'
			type BOOLEAN
			count 2
		}
	}
	control.14 {
		iface MIXER
		name 'Dock Mic Boost Volume'
		value.0 1
		value.1 1
		comment {
			access 'read write'
			type INTEGER
			count 2
			range '0 - 3'
			dbmin 0
			dbmax 3600
			dbvalue.0 1200
			dbvalue.1 1200
		}
	}
	control.15 {
		iface MIXER
		name 'Mic Boost Volume'
		value.0 1
		value.1 1
		comment {
			access 'read write'
			type INTEGER
			count 2
			range '0 - 3'
			dbmin 0
			dbmax 3000
			dbvalue.0 1000
			dbvalue.1 1000
		}
	}
	control.16 {
		iface MIXER
		name 'Internal Mic Boost Volume'
		value.0 0
		value.1 0
		comment {
			access 'read write'
			type INTEGER
			count 2
			range '0 - 1'
			dbmin 0
			dbmax 1200
			dbvalue.0 0
			dbvalue.1 0
		}
	}
	control.17 {
		iface MIXER
		name 'Master Playback Volume'
		value 66
		comment {
			access 'read write'
			type INTEGER
			count 1
			range '0 - 87'
			dbmin -6525
			dbmax 0
			dbvalue.0 -1575
		}
	}
	control.18 {
		iface MIXER
		name 'Master Playback Switch'
		value true
		comment {
			access 'read write'
			type BOOLEAN
			count 1
		}
	}
	control.19 {
		iface CARD
		name 'Dock Mic Jack'
		value false
		comment {
			access read
			type BOOLEAN
			count 1
		}
	}
	control.20 {
		iface CARD
		name 'Mic Jack'
		value false
		comment {
			access read
			type BOOLEAN
			count 1
		}
	}
	control.21 {
		iface CARD
		name 'Internal Mic Phantom Jack'
		value true
		comment {
			access read
			type BOOLEAN
			count 1
		}
	}
	control.22 {
		iface CARD
		name 'Speaker Phantom Jack'
		value true
		comment {
			access read
			type BOOLEAN
			count 1
		}
	}
	control.23 {
		iface CARD
		name 'Dock Headphone Jack'
		value false
		comment {
			access read
			type BOOLEAN
			count 1
		}
	}
	control.24 {
		iface CARD
		name 'Headphone Jack'
		value false
		comment {
			access read
			type BOOLEAN
			count 1
		}
	}
	control.25 {
		iface MIXER
		name 'Beep Playback Volume'
		value.0 6
		value.1 6
		comment {
			access 'read write'
			type INTEGER
			count 2
			range '0 - 31'
			dbmin -3450
			dbmax 1200
			dbvalue.0 -2550
			dbvalue.1 -2550
		}
	}
	control.26 {
		iface MIXER
		name 'Beep Playback Switch'
		value.0 true
		value.1 true
		comment {
			access 'read write'
			type BOOLEAN
			count 2
		}
	}
	control.27 {
		iface PCM
		name 'Playback Channel Map'
		value.0 0
		value.1 0
		value.2 0
		value.3 0
		comment {
			access read
			type INTEGER
			count 4
			range '0 - 36'
		}
	}
	control.28 {
		iface PCM
		name 'Capture Channel Map'
		value.0 0
		value.1 0
		comment {
			access read
			type INTEGER
			count 2
			range '0 - 36'
		}
	}
	control.29 {
		iface MIXER
		name 'PCM Playback Volume'
		value.0 255
		value.1 255
		comment {
			access 'read write user'
			type INTEGER
			count 2
			range '0 - 255'
			tlv '0000000100000008ffffec1400000014'
			dbmin -5100
			dbmax 0
			dbvalue.0 0
			dbvalue.1 0
		}
	}
	control.30 {
		iface MIXER
		name 'Digital Capture Volume'
		value.0 67
		value.1 67
		comment {
			access 'read write user'
			type INTEGER
			count 2
			range '0 - 120'
			tlv '0000000100000008fffff44800000032'
			dbmin -3000
			dbmax 3000
			dbvalue.0 350
			dbvalue.1 350
		}
	}
}
state.pcsp {
	control.1 {
		iface MIXER
		name 'Master Playback Switch'
		value true
		comment {
			access 'read write'
			type BOOLEAN
			count 1
		}
	}
	control.2 {
		iface MIXER
		name 'BaseFRQ Playback Volume'
		value '18643'
		comment {
			access 'read write'
			type ENUMERATED
			count 1
			item.0 '18643'
			item.1 '37286'
		}
	}
	control.3 {
		iface MIXER
		name 'Beep Playback Switch'
		value true
		comment {
			access 'read write'
			type BOOLEAN
			count 1
		}
	}
}
--endcollapse--


!!All Loaded Modules
!!------------------

Module
iptable_filter
ip_tables
cpufreq_conservative
ccm
fan
snd_hda_codec_hdmi
input_leds
uvcvideo
videobuf2_vmalloc
videobuf2_memops
videobuf2_v4l2
videobuf2_core
videodev
media
btusb
btrtl
btbcm
btintel
bluetooth
snd_pcsp
rtsx_pci_ms
rtsx_pci_sdmmc
iwldvm
mac80211
rtsx_pci
iwlwifi
cfg80211
snd_hda_codec_realtek
snd_hda_codec_generic
i2c_i801
i2c_smbus
lpc_ich
shpchp
snd_hda_intel
snd_hda_codec
snd_hda_core
e1000e
snd_hwdep
snd_pcm_oss
snd_mixer_oss
snd_pcm
ptp
snd_seq_dummy
pps_core
snd_seq_oss
i915
snd_seq_midi
snd_seq_midi_event
snd_rawmidi
snd_seq
snd_seq_device
snd_timer
snd
drm_kms_helper
soundcore
drm
i2c_algo_bit
wmi
battery
tpm_tis
tpm_tis_core
tpm
thinkpad_acpi
nvram
rfkill
hwmon
ac
fjes


!!Sysfs Files
!!-----------

/sys/class/sound/hwC0D0/init_pin_configs:
0x05 0x18560010
0x06 0x18560010
0x07 0x18560010

/sys/class/sound/hwC0D0/driver_pin_configs:

/sys/class/sound/hwC0D0/user_pin_configs:

/sys/class/sound/hwC0D0/init_verbs:

/sys/class/sound/hwC0D0/hints:

/sys/class/sound/hwC1D0/init_pin_configs:
0x12 0x90a60130
0x13 0x40000000
0x14 0x90170110
0x15 0x0321101f
0x16 0x411111f0
0x18 0x411111f0
0x19 0x411111f0
0x1a 0x03a11020
0x1b 0x411111f0
0x1d 0x40738105
0x1e 0x411111f0

/sys/class/sound/hwC1D0/driver_pin_configs:
0x16 0x21211010
0x19 0x21a11010

/sys/class/sound/hwC1D0/user_pin_configs:

/sys/class/sound/hwC1D0/init_verbs:

/sys/class/sound/hwC1D0/hints:


!!ALSA/HDA dmesg
!!--------------

thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
thinkpad_acpi: volume: disabled as there is no ALSA support in this kernel
input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input8
--
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3232: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0:    hp_outs=2 (0x16/0x15/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC1D0:    inputs:
snd_hda_codec_realtek hdaudioC1D0:      Dock Mic=0x19
snd_hda_codec_realtek hdaudioC1D0:      Mic=0x1a
snd_hda_codec_realtek hdaudioC1D0:      Internal Mic=0x12
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
Intel(R) Wireless WiFi driver for Linux
--
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17
input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18
input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input19
iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
--
ip_tables: (C) 2000-2006 Netfilter Core Team
snd_hda_intel 0000:00:1b.0: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
aufs au_new_inode:466:cat[11194]: Warning: Un-notified UDBA or repeatedly renamed dir, b1, ext3, Xorg.0.log, hi16789, i12369.

Posted: **Mon Jun 13, 2022 4:55 pm**

rcrsn51 wrote: ↑Sun Jun 12, 2022 4:53 pm
fredx181 wrote: ↑Sun Jun 12, 2022 4:24 pm
Just trying to understand, how can this work if /etc/asound.conf doesn't contain the special config for Loopback capture ?

Because the script copies /etc/asound.conf to /root/.asoundrc if the first file exists and the second does not.

Suppose a Puppy user has an asound.conf file that sets the default to a device other than hw:0,0. When they start using alsa-capture, their playback will be broken because the script sets the default to hw:0,0 if .asoundrc does not exist yet. V1.4 solves this problem.

I suspect that's what happened to Dingo.

Yes, I see now, in the end the "Loop" .asoundrc will be in use for capturing.
@Dingo if you delete possibly leftover /root/.asoundrc from earlier alsa-capture tries first, I suspect that v1.4. will work with what you did earlier.

Posted: **Fri Jun 17, 2022 2:52 pm**

I could never get AnyDesk to work in the Starter Kit unless I switched to a multi-user setup with a login manager. But RustDesk works OOTB, with a some caveats.

1. RustDesk uses pulseaudio. If you install the rustdesk .deb package, you will also get pulseaudio. This is a good thing because it provides audio transfer from the remote computer. But it will break "apulse firefox"! To get Firefox working, use

Code: Select all

pulseaudio --start (ignore the warning message about running as root)
/opt/firefox/firefox

2. If you remove the rustdesk package, you may also need to remove the pulseaudio package separately. This is required to restore "apulse firefox".

3. A safer procedure is to make a rustdesk squashfs module using repo2sfs. This is a vanilla third-party build. No extra packages are needed.

4. Start it as follows:
a. Load the module.
b. Run: pulseaudio --start
c. Start RustDesk from the Other menu.

5. To shut down the system:
a. Close RustDesk.
b. Run: pulseaudio --kill
c. Unload the module.

6. I could not get RustDesk to work with an old Core2Duo machine. It crashed with an "illegal instruction" error.

Posted: **Sat Jun 18, 2022 12:37 am**

I have interest in remote desktop app.
I spent few minutes on this. Very easy to use - can use for what I have in mind, remote support for family member.
I didn't need audio, so I didn't look into audio side, probably will do at some point later.

rcrsn51 wrote: ↑Fri Jun 17, 2022 2:52 pm
6. I could not get RustDesk to work with an old Core2Duo machine. It crashed with an "illegal instruction" error.

FYI - I tested on 2 laptops, both are D630. They are Core2Duo (T8300).

Posted: **Sat Jun 18, 2022 1:58 am**

dcung wrote: ↑Sat Jun 18, 2022 12:37 am
FYI - I tested on 2 laptops, both are D630. They are Core2Duo (T8300).

In my test, the C2D machine was the "remote" computer whose desktop I wanted to control. This setup crashed. But when I used the C2D machine as the "local" computer to see another computer's desktop, it worked.

However, I have only a T7300, so maybe there is a small difference in the instruction sets.

Posted: **Sat Jun 18, 2022 2:26 am**

rcrsn51 wrote: ↑Sat Jun 18, 2022 1:58 am
However, I have only a T7300, so maybe there is a small difference in the instruction sets.

I got a T7500 and a T5870 somewhere - see if that makes any difference.
When I got a chance, I'll test it and report.

Posted: **Sat Jun 18, 2022 2:50 am**

Tested on T7500.
Got same result with your T7300.
"Local" ok, "remote" crashed.

I didn't test on T5870.

Posted: **Sat Jun 18, 2022 11:12 am**

Thanks. I don't have any old AMD stuff, but it might have the same limitation.

But with newer hardware, RustDesk works extremely well.

Posted: **Sat Jun 18, 2022 7:53 pm**

dcung wrote: ↑Sat Jun 18, 2022 2:50 am
I didn't test on T5870.

Now also tested on T5870.
Got same result with T7300/T7500.
"Local" ok, "remote" crashed.

Posted: **Sat Jun 18, 2022 8:01 pm**

I looked up the specs of some C2Ds. The T8300 has an SSE4 instruction set that the older ones do not. So that's probably the limiting factor.

Posted: **Mon Jun 27, 2022 11:56 am**

The Deblive Multi Installer v3 is posted on page 1. It removes Syslinux as the USB installer and replaces it with Ventoy.

Update: The recommended USB installer is now ISObooter.

Posted: **Tue Jul 05, 2022 3:48 pm**

This app is discussed in the Puppy forum here. The main website is here and a .deb package is available here.

If you just want a basic PDF viewer, there are simpler apps, like mupdf. But PDF Studio Viewer can also handle fillable PDF forms and do annotations.

This is a standard repo2sfs third-party build with a Pause B setup script attached below. Extract the script - it is NOT a fake .gz package.

Hint: to terminate the program, use the File menu. Don't just close the window.

-----------------------

Posted: **Fri Jul 08, 2022 1:55 pm**

This is a variant of the current Multi Installer v3 with two more tools.

1. The EasyOS tool installs EasyOS directly from its .img file to a USB or internal drive. It requires a recent version of losetup.

2. The Limine tool converts GRUB2 menu code to limine.cfg format.

Update: Removed due to lack of feedback.

--------------------

Posted: **Tue Jul 12, 2022 2:22 pm**

RouterMaker is a little app that lets your computer act as a basic router. It becomes the hub of a wired network and assigns IP addresses to other computers connected to its LAN. It can optionally provide a gateway to the Internet.

The program is /usr/local/bin/routermaker. Open the script in a text editor and note these lines at the top:

Code: Select all

IFACE="eth0"
SUBNET="192.168.51"
DNS="8.8.8.8"
ROUTE=""

a. The IFACE variable defines the Ethernet port on your computer that is wired to the RouterMaker LAN.
b. The SUBNET variable defines the set of IP addresses that will be assigned to client computers on the network.
c. The ROUTE variable is optional. Use it if you have a second port (like wlan0) that has Internet access.

Start RouterMaker from a terminal with: routermaker

Note: In your PeasyWiFi Ethernet section, set the IFACE interface to Disable. This stops it from trying to acquire an IP address on its own.

Note: Bionicpup32 uses cryptic interface names like enp3s0 instead of eth0. RouterMaker works with these but it's easier to switch back to regular names. In your GRUB boot menu, add the option "net.ifnames=0" to the "kernel" line.

Here are some ways to use RouterMaker:

1. Directly connect two machines together by their Ethernet ports with a CAT5 cable.

Start RouterMaker on one machine. It will be the "server" and will have IP address 192.168.51.1. Boot up the other machine. Its networking software should automatically get an IP address from the server via DHCP, like 192.168.51.45. The two machines can ping each other and you can run file transfer software like Gnetcat between them.

2. The RouterMaker machine has a second port like wlan0 that is already connected to the Internet. It will provide shared Internet to clients. To use this feature, you must also install the "iptables" package on the RouterMaker machine. And its kernel must contain the MASQUERADE module.

Assign this port to the ROUTE variable (see above) and run RouterMaker. When a client machine boots up, its IP address will include a route to the Internet via the server.

3. You have a private network of several machines connected to an Ethernet switch box with CAT5 cables. One of these machines will run RouterMaker. As the client machines boot up, they will get unique IP addresses on the subnet.

The RouterMaker machine can run sharable resources like a file server or printer that are accessible to the clients. Clients will locate the server at 192.168.51.1.

---------------------------

Update: Numerous downloads. Zero feedback. Zero test reports. Project withdrawn. If anyone still wants it, they can post a request.

-----------------------

Posted: **Tue Jul 12, 2022 7:10 pm**

Hi rc,
while in with Bionicpup64 it works regularly with the Distro: BionicPup32 19.03 the application starts well, then when I specify 'camera' it recognizes the xiaomi tablet I mount but then does not show me the android folders. And nothing happens.
sonia

Posted: **Tue Jul 12, 2022 8:14 pm**

????????????

Are you talking about CamPhoneTab? What package are you using in Bionic? A .pet or a .deb? Where did you get it?

Puppy Linux Discussion Forum

The Debian-Live Daedalus Starter Kit

Re: The Debian-Live Bullseye Starter Kit

Re: The Debian-Live Bullseye Starter Kit

Re: The Debian-Live Bullseye Starter Kit

Re: The Debian-Live Bullseye Starter Kit

Re: The Debian-Live Bullseye Starter Kit

Re: The Debian-Live Bullseye Starter Kit

Re: The Debian-Live Bullseye Starter Kit

Re: The Debian-Live Bullseye Starter Kit

Re: The Debian-Live Bullseye Starter Kit

Re: The Debian-Live Bullseye Starter Kit

Re: The Debian-Live Bullseye Starter Kit

Re: The Debian-Live Bullseye Starter Kit

Re: The Debian-Live Bullseye Starter Kit

Re: The Debian-Live Bullseye Starter Kit

Re: The Debian-Live Bullseye Starter Kit

Re: The Debian-Live Bullseye Starter Kit

RustDesk remote desktop app

Re: RustDesk remote desktop app

Re: RustDesk remote desktop app

Re: RustDesk remote desktop app

Re: The Debian-Live Bullseye Starter Kit

Re: The Debian-Live Bullseye Starter Kit

Re: The Debian-Live Bullseye Starter Kit

Re: The Debian-Live Bullseye Starter Kit

Re: The Debian-Live Bullseye Starter Kit

How to make a squashfs module for PDF Studio Viewer

Multi Installer - EasyOS edition

RouterMaker

Re: The Debian-Live Bullseye Starter Kit

Re: The Debian-Live Bullseye Starter Kit