KLV-Hyprland-CE-2.0

[Sofiya]

note then you don't need a script in startup
in /etc/modules-load.d/snd-seq.conf

[geo_c]

Playing some sounds ->

Hey man we're about to rock on all these OS's: viewtopic.php?p=110248#p110248

[Sofiya]

@Sofiya It's awesome. Really cool layout and one can feel the efforts made to get this great distro together

Booted KLV-HyperlandCE-3.3 on a Dell Optiplex 990 with 8 G of RAM and its running great, good responsiveness and looks fantastic.

Takes a bit to get used to the controls....sort of messing around......but I did set up the load_snd-seq_mod.sh script:
place in /root/Startup:

Code: Select all

#!/bin/sh
sudo modprobe snd-seq

which works and MIDI devices are recognized by the system

In KLV-HyperlandCE-3.3 not everything is included, assemble through the build script, everything will be included there

[rockedge]

@Sofiya which is the latest build script?

[Sofiya]

@Sofiya which is the latest build script?

There is only one build script, changes are made to
"gitlab.com" . changes from January 27.01.24

[rockedge]

@Sofiya Thanks........I am assembling a build right now on a F96-CE_4 which does a really good job running the FIrstRib build scripts for KLV's.

[rockedge]

I have finished the build successfully constructed and transferred, then installed frugally, KLV-HyprlandCE-RT. Using @Sofiya 's build script assembled the system rootfs and I swapped in the RT kernel 6.6.0-rt15

It is running right now and I can say at first tests, it is really fast. Started in around 380 M. Looks good but no wallpapers yet. Beginning to test audio/video configuration.

Screenshots will follow. But I need a nap for a bit.........

[Sofiya]

During the test drive, Smplayer was found to be behaving incorrectly. amendments have been made

in /home/spot/.config/hypr/configs/environment.conf comment out line 9 .Uncomment line 10 . and in Smplayer settings enable Wayland support
settings > general > video - check the box Wayland support

[Sofiya]

KLV-Hyprland-CE-3.4 stable

[Sofiya]

I have finished the build successfully constructed and transferred, then installed frugally, KLV-HyprlandCE-RT. Using @Sofiya 's build script assembled the system rootfs and I swapped in the RT kernel 6.6.0-rt15

It is running right now and I can say at first tests, it is really fast. Started in around 380 M. Looks good but no wallpapers yet. Beginning to test audio/video configuration.

Screenshots will follow. But I need a nap for a bit.........

But in general they are installed there by default, the ones in the picture
Select wallpaper MOD-ctrl+W ,MOD+W.
They are registered to load when the system boots, in order to install the ones you want you need to comment out line 8 in ( /home/spot/.config/hypr/configs/exec.conf ).Then install yours by pressing MOD-ctrl+W.
The wallpaper itself is located in /home/spot/Pictures/wallpapers. The script is written under this path.You can post yours there

[Sofiya]

After launch

[Gnimmelf]

Thanks i wil try that! @Sofiya

"I don’t understand why you need a tray?"

it was just a word in lack of better. i ment the "bar" on top of screen, from where different tools is accesed.

sorry for my inabillity to use correct language

kindly Gnimmelf

[Sofiya]

super features

• picture 1) MOD_SHIFT+U --front background
• picture 2) MOD+G -- several windows in one window -- after pressing MOD+G again the windows disintegrate
• MOD+F -- view in full screen

[Sofiya]

Functions and hotkeys

Place in /home/spot/.config/hypr/cheatsheet.md with replacement .

Open Super + H list

Code: Select all

# Welcome to my Hyprland help, and tips and tricks 

  Super = Windows Key

# common operations
  Super          H        *keyhint* (THIS DOCUMENT)
  Super          Return   *term* (`foot`)
  Super          Q        *quit* (kill focused window)
  Super   Shift  Q        *quit* (kill focused window)
  Super          D        *show app menu* (`wofi small`)
  Super   Shift  D        *show app menu* (`wofi large`)
  Super   SHIFT  N        *Network configuration       

  Super   SHIFT  F        *Pcmanfm (root)      

  Super   SHIFT  G        *Geany (root)     

  Super   SHIFT  T        *Sakura (root)
  Super   SHIFT  Y        *Restarting the panel
  Super   SHIFT  P        *Preservation
  Super   SHIFT  Space    *Toggle floating 
  Super   SHIFT  F        *full screen window mode
  Super   SHIFT  Return   *Sakura Terminal
  Super   SHIFT  T        *Pcmanfm (spot)
  Super   SHIFT  W        *Changing the bar style
  Super   CTRL   W        *Selecting a panel style
  Super   ALT    V        *Clipboard - Wofi
  Super   ALT    R        *Dark Light Wofi
  Super   ALT    B        *Rainbow Borders
  Super   ALT    X        *Sunset - like automatic Redshift mode
  Super   SHIFT  B        *Hide waybar
  Super   ALT    J        *Choosing Wofi Emoji
  Super   ALT    P        *WoFi Power Menu
  Super   SHIFT  O        *Pipette - color selection
  Super          M        *Dispatch splitratio 0.3
  Super          P        *Pseudo, # shrink window
   

  ----------------------------------------------------------------------
  Super  SHIFT   U        *front background
  Super          G        *several windows in one window -- after pressing MOD+G again the windows disintegrate
  **********************************************************************
  Mod CTRL, D, layoutmsg, removemaster
  Mod, Escape, exec, hyprctl kill
  Mod, I, layoutmsg, addmaster
  Mod, J, layoutmsg, cyclenext
  Mod, K, layoutmsg, cycleprev
  Mod, M, exec, hyprctl dispatch splitratio 0.3
  Mod, P, pseudo, # dwindle
  Mod CTRL, Return, layoutmsg, swapwithmaster
  Mod, Space, exec, $scriptsDir/changeLayout
  

# touchpad
  Menu,   Touchpad.sh     # enable / disable touchpad

# wallpaper / styling stuff
  Super           w       *wallpaper shuffle* (right click on wallpaper   waybar module)
  Super   Shift   w       *waybar style-change* (middle click on wallpaper   waybar module)
  Super   Ctrl    w       *wallpaper switcher* (click on wallpaper waybar    module)
  

  - To change permanently the wallpaper edit the file in *~/.config/hypr/configs/Execs.conf*
  - For a persistent wallpaper after dark-light mode, edit your Execs.conf. Either delete or put # before exec-once=swww query | swww init and delete the # before exec-once = swww init (Lines 7 and 8 on Execs.conf )

# Monitor, executables, keybindings, window rules, 
  files are located in *~/.config/hypr/configs*
  Keybindings file is located here *~/.config/hypr/configs/Keybinds.conf*

# screenshot may need to hold down the function (`fn`) key. You can change keybinds in *~/.config/hypr/configs/Keybinds.conf* 
  Super PrintScr(button)       *full screenshot*
  Super Shift PrintSrc(button) *active window screenshot*         

  Super CTRL SHIFT PrintScr    *full screenshot + timer (5s)*
  Super Alt PrintScr           *full screenshot + timer (10s)*
  Super Shift S                *screenshot with swappy*

# clipboard manager (cliphist)
  Super Alt V   *launch the wofi menu of clipboard manager* 
    - double click to select the clipboard. And paste as normal
    - to clean up clipboard manager, launch foot (super enter) then type cliphist wipe
    

# container layout
  Super   Shift   Space       *toggle tiling/floating mode*
  Super   left mouse button   *move window*
  Super   right mouse button  *resize window* (note only in float mode)


# workspaces
  Super         1 .. 0    *switch to workspace 1 .. 10*
  Super  Shift  1 .. 0    *move container to workspace 1 .. 10*
  Super   Tab             *cycle through workspaces*

# waybar customizations
  - waybar font too big or too small. Edit the font-size in waybar styles located in ~/.config/hypr/waybar/styles/ . By default, it is set to 100%. After adjusting the GTK font scaling to your liking, edit all the waybar styles. Reduce or increase according to your needs. NOTE that its on percent %. You can also change to px whichever suits you.

  - if you want 12h format instead of 24H format, edit the ~/.config/hypr/waybar/modules look for clock. delete the // and add // or delete the previous one

  - CPU Temperature:
    - a.) to change from deg C to deg F , edit the ~/.config/hypr/waybar/modules look for "temperature". Change the format to "format": "{temperatureF}°F {icon}",
    - b.) to fix the temperature if not showing correctly, comment "thermal zone": 0 by putting // before. Delete the // on the "hwmon path". Refresh waybar by pressing CTRL SHIFT w. If still not showing correctly, navigate to /sys/class/hwmon/ and open each hwmon. Look for k10temp for amd. Not sure about intel cpu. and edit accordingly the hwmon path in the "temperature" waybar module.
    - b.1) use this function to easily identify the hwmon path. Ran this in your terminal    ``` for i in /sys/class/hwmon/hwmon*/temp*_input; do echo "$(<$(dirname $i)/name): $(cat ${i%_*}_label 2>/dev/null || echo $(basename ${i%_*})) $(readlink -f $i)"; done ```
  

# Hyprland configurations
  - *Hyprland* configuration files are in `~/.config/hypr/`
  - files located in this folder can be edited using editor of your choice.

# notes for nvidia gpu users
  - Do note that you need to enable or disable some items in environment.conf file located in `~/.config/hypr/configs/environment.conf`


TO CLOSE THIS DOCUMENT - Super q or Super Shift q or if vim, press esc :q!

[rockedge]

But in general they are installed there by default, the ones in the picture

The second time I booted up the wallpapers were okay! All good.

Cheat sheet is really helpful!

[Sofiya]

I got tired of constantly setting the brightness so I did this.
For me it sets the screen brightness to 50%
I don’t know, of course, whether this will work for everyone. I just know the value of my Notebook and boldly set the value

in /home/spot/Startup/brightness.sh

Code: Select all

#!/bin/bash

sleep 2
brightnessctl set 128

[Sofiya]

I want to set the color scheme to Micro
I like it so far

[Sofiya]

notify:
Additions have been made 28.01.2024

[rockedge]

@Sofiya The version I built with the script does not show the OctoXBPS notifier in the panel for some reason. This is not causing any problems but it is an empty position on the panel / bar.

[Sofiya]

@Sofiya The version I built with the script does not show the OctoXBPS notifier in the panel for some reason. This is not causing any problems but it is an empty position on the panel / bar.

icon is launched from /home/spot/Startup/octo xbps-notifier.sh .

If you are not connected to the Internet, this icon will not appear. emptiness is the system tray. System icons are displayed there if something is running on the system
The OctoXBPS icon is only displayed if the network is connected.You can remove the system tray altogether, but the bluetooth connection icon is also displayed there

if you don't need the system tray comment out in /home/spot/.config/hypr/waybar/configs/config-retro строка 47 on // "tray",

[Sofiya]

or make the tray button transparent.
line 500 in /home/spot/.config/hypr/waybar/style/style-retro.css

Code: Select all

/* =============================== */
/* Tray Module */
#tray {
  color: @mauve;
  background-color: rgba(0,0,0,0); 
  padding-right: 1.25rem;
  padding-left: 1.25rem; 
   

}

[Sofiya]

in /home/spot/.config/hypr/waybar/style/style-retro.css

[TerryH]

@Sofiya AMAZING!
I ran the build script to create KLV Hyprland.

I have so far worked out most things, to be able to use KLV Hyprland. I didn't see any GUI method to set up timezome, but have set it up manually. I followed direction in the cheat sheet to make wallpaper change persistent.

In the imaage in the preceding post, in the Panel, I don't know what the first item on the left ( a large round dot) is for, clicking on it doesn't do anything.

So far I have config change I want to make saved, except for Network setup. I just can't work out how to manage Network settings. For me the Network Manager TUI appears to function incosistently, or I just don't know what I'm doing. I was able to get a connection, but hadn't saved my changes when I made another error with something else so I did a reboot without saving, thinking I would be able to connect again. On rebooting, I was unable to Edit or Activate a connection. Sometimes when running Network Manager, clicking on either of the options doesn't appear to do anything.

Thank you for your continued production of excellent KL distros.

Edit: I finally got the network to hold my connection, but I had to resort to manually editing the connection config. To be able to do anything with NMTUI, I have 2 instances of it running, as the first instance doesn't let me do anything. Clearly something wrong with how it is working on my laptop. The window which is displayed, the bottom half of the window is all black, doesn't seem right. I did online searches on how to use NMTUI, it isn't working for me as described. I get very haphazard results.

[wiak]

For me the Network Manager TUI appears to function incosistently, or I just don't know what I'm doing. I was able to get a connection, but hadn't saved my changes when I made another error with something else so I did a reboot without saving, thinking I would be able to connect again.

I haven't tried it yet, but I gather that Hyperland is on Wayland. In KLV_Sway (also Wayland) I find that nmtui sometimes produces strange window and I occasionally juggle tiles till it look correct... Not sure why not displaying always correctly - presumably something to do with ncurses on top of Wayland, but I'm just guessing. nmtui does work for me fine though in Sway, but you would need to 'save' to persistence, if in RAM2 save on demand mode, for it to auto-connect on further boots. The fact you managed to connect using nmtui suggests it is working correctly (though that's just an assumption) but you need to learn how to use it...

[Sofiya]

@Sofiya AMAZING!
I ran the build script to create KLV Hyprland.

I have so far worked out most things, to be able to use KLV Hyprland. I didn't see any GUI method to set up timezome, but have set it up manually. I followed direction in the cheat sheet to make wallpaper change persistent.

In the imaage in the preceding post, in the Panel, I don't know what the first item on the left ( a large round dot) is for, clicking on it doesn't do anything.

So far I have config change I want to make saved, except for Network setup. I just can't work out how to manage Network settings. For me the Network Manager TUI appears to function incosistently, or I just don't know what I'm doing. I was able to get a connection, but hadn't saved my changes when I made another error with something else so I did a reboot without saving, thinking I would be able to connect again. On rebooting, I was unable to Edit or Activate a connection. Sometimes when running Network Manager, clicking on either of the options doesn't appear to do anything.

Thank you for your continued production of excellent KL distros.

Edit: I finally got the network to hold my connection, but I had to resort to manually editing the connection config. To be able to do anything with NMTUI, I have 2 instances of it running, as the first instance doesn't let me do anything. Clearly something wrong with how it is working on my laptop. The window which is displayed, the bottom half of the window is all black, doesn't seem right. I did online searches on how to use NMTUI, it isn't working for me as described. I get very haphazard results.

Network connection
1) click on the network icon in the tray .the settings window will open
2) Press down key to select activate connection.a network selection list will open .select the name of your adapter . enter .enter password
3)after entering the password correctly you are connected to your network .then exit settings

[Sofiya]

@Sofiya AMAZING!

In the imaage in the preceding post, in the Panel, I don't know what the first item on the left ( a large round dot) is for, clicking on it doesn't do anything.

In the imaage in the preceding post, in the Panel, I don't know what the first item on the left ( a large round dot) is for, clicking on it doesn't do anything.

These are your desktops. selection of tables key combination MOD+ 1.2.3.4.5......
total 10 desktops .on each workspace you can open different applications. and go to them via MOD + 1.2.3.4....... and so on up to 10. 10 is MOD +0

[TerryH]

@Sofiya AMAZING!

In the imaage in the preceding post, in the Panel, I don't know what the first item on the left ( a large round dot) is for, clicking on it doesn't do anything.

In the imaage in the preceding post, in the Panel, I don't know what the first item on the left ( a large round dot) is for, clicking on it doesn't do anything.

These are your desktops. selection of tables key combination MOD+ 1.2.3.4.5......
total 10 desktops .on each workspace you can open different applications. and go to them via MOD + 1.2.3.4....... and so on up to 10. 10 is MOD +0

Oh, silly me, seniors moment. I had the panel setup displaying the desktops numerically and didn't associate them.

[TerryH]

@Sofiya AMAZING!
I ran the build script to create KLV Hyprland.

I have so far worked out most things, to be able to use KLV Hyprland. I didn't see any GUI method to set up timezome, but have set it up manually. I followed direction in the cheat sheet to make wallpaper change persistent.

In the imaage in the preceding post, in the Panel, I don't know what the first item on the left ( a large round dot) is for, clicking on it doesn't do anything.

So far I have config change I want to make saved, except for Network setup. I just can't work out how to manage Network settings. For me the Network Manager TUI appears to function incosistently, or I just don't know what I'm doing. I was able to get a connection, but hadn't saved my changes when I made another error with something else so I did a reboot without saving, thinking I would be able to connect again. On rebooting, I was unable to Edit or Activate a connection. Sometimes when running Network Manager, clicking on either of the options doesn't appear to do anything.

Thank you for your continued production of excellent KL distros.

Edit: I finally got the network to hold my connection, but I had to resort to manually editing the connection config. To be able to do anything with NMTUI, I have 2 instances of it running, as the first instance doesn't let me do anything. Clearly something wrong with how it is working on my laptop. The window which is displayed, the bottom half of the window is all black, doesn't seem right. I did online searches on how to use NMTUI, it isn't working for me as described. I get very haphazard results.

Network connection
1) click on the network icon in the tray .the settings window will open
2) Press down key to select activate connection.a network selection list will open .select the name of your adapter . enter .enter password
3)after entering the password correctly you are connected to your network .then exit settings

The problem was I don't see a full window as you have shown. The bottom half of my window is all black. When I was trying to put in my password, I couldn't see it. To get a better view I have to toggle to float and the window is rederred better, so I can see what I am doing. Thanks @wiak for the tip.

[geo_c]

The problem was I don't see a full window as you have shown. The bottom half of my window is all black. When I was trying to put in my password, I couldn't see it. To get a better view I have to toggle to float and the window is rederred better, so I can see what I am doing. Thanks @wiak for the tip.

nmtui can be annoying in how it displays, but it does work very reliably once you can see the entire window.

A good approach is to start with an empty workspace, open a terminal and run nmtui from the terminal. And yes I noticed floating it in Hyprland seems to help.

[Sofiya]

@Sofiya AMAZING!
I ran the build script to create KLV Hyprland.

The problem was I don't see a full window as you have shown. The bottom half of my window is all black. When I was trying to put in my password, I couldn't see it. To get a better view I have to toggle to float and the window is rederred better, so I can see what I am doing. Thanks @wiak for the tip.

Yes, such an immodest question, what kind of video card do you have?