Puppy Linux Discussion Forum

radky released a number of busterpup in 2019 and one of them is buster 8.0 k4.19.56.

More information and download iso:
https://archive.org/details/Puppy_Linux_BusterPup

I have created 6 half-Chinese language pets for buster 8.0k41956:
fcitx Chinese input platform:
fcitx_4.2.7-en-zh-raring-13.2.2.pet (25 mb)

scim Chinese input platform:
scim_1.4.14-en-zh-raring-13.2.2.pet (22 mb)

yong Chinese input platform:
yong3264_4.2.0-en-zh-raring-13.2.2.pet (9 mb)
yong3264_th_2016.11.5-en-zh-raring-13.2.2.pet (8 mb)
yong3264_thjj_2016.7.29-en-zh-raring-13.2.2.pet (8 mb)
yong3264_thth_2014.8.5-en-zh-raring-13.2.2.pet (10 mb)

Plus 2 Chinese language pets for buster 8.0k41956:
Simplified Chinese:
buster-8.0k41956-zhcn-13.2.2.pet (2 mb)

Traditional Chinese:
buster-8.0k41956-zhhk-13.2.2.pet (2 mb)

To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in buster 8.0k41956

(b) the version corresponding Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for buster 8.0k41956

for more information about the fcitx and scim pets, please see posting dated Feb 19, 2015 on page 15 of this subject
for more information about the yong pets, please see posting dated Dec 31, 2016 on page 25 of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

josejp2424 has released a number of dpupbuster 64 systems recently: dpupbuster64 8.0.0 09082020 and dpupbuster64-xfce 8.0.0 05122019

More information and forum discussions:
http://murga-linux.com/puppy/viewtopic.php?t=116615

Download:
https://archive.org/details/Puppy_Linux_Dpup_Buster

I have created 6 half-Chinese language pets for dpupbuster64 8.0.0 09082020 and dpupbuster64-xfce 8.0.0 05122019:

fcitx Chinese input platform:
fcitx64_4.2.9-en-zh-bionic-18.0.5s.pet (30 mb)

scim Chinese input platform:
scim64_1.4.14-en-zh-buster-18.0.5s.pet (22 mb)

yong Chinese input platform:
yong3264_4.2.0-en-zh-buster-18.0.5s.pet (8.6 mb)
yong3264_th_2016.11.5-en-zh-buster-18.0.5s.pet (7.9 mb)
yong3264_thjj_2016.7.29-en-zh-buster-18.0.5s.pet (8.4 mb)
yong3264_thth_2014.8.5-en-zh-buster-18.0.5s.pet (9.5 mb)

Plus 2 Chinese language pets each for dpupbuster64 8.0.0 09082020 and dpupbuster64-xfce 8.0.0 05122019:
Simplified Chinese:
dpupbuster64xfce-8.0.0_05112019-zhcn-18.0.5s.pet (3.6 mb)
dpupbuster64-8.0.0_09082020-zhcn-18.0.5s.pet (3.6 mb)

Traditional Chinese:
dpupbuster64xfce-8.0.0_05112019-zhhk-18.0.5s.pet (4.0 mb)
dpupbuster64-8.0.0_09082020-zhhk-18.0.5s.pet (4.0 mb)

To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in dpupbuster64 8.0.0 09082020 and dpupbuster64-xfce 8.0.0 05122019

(b) the 2 name corresponding Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for dpupbuster64 8.0.0 09082020 and dpupbuster64-xfce 8.0.0 05122019

for more information about the fcitx64 4.2.9 pet, please see postings dated Feb 4 and 12, 2015 on page 15 of this subject
for more information about the scim64 1.4.14 pet, please see postings dated Feb 6 and 13, 2015 on page 15 of this subject
for more information about the yong pets, please see posting dated Dec 31, 2016 on page 25 of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

darry19662018 posted a notice on Sep 3, 2020 about a list of Puppy derivatives created by the Hungarian forum members. I have created Chinese language pets for 7 selected 32 bits Puppy derivatives systems from the list: asciipup 7.0.0; bullseyepup 9.0.0; eoanapup 8.0.0; etionapup 8.0.0; focalpup 9.0.0; pupjibarostretch 7.0.0 and pupbibarojessie 6.4.2.

More information and download iso:
https://skamilinux.hu/nocsak/puppychart/

I have created 6 half-Chinese language pets for asciipup 7.0.0; bullseyepup 9.0.0; eoanapup 8.0.0; etionapup 8.0.0; focalpup 9.0.0; pupjibarostretch 7.0.0 and pupbibarojessie 6.4.2:

fcitx Chinese input platform:
fcitx_4.2.7-en-zh-raring-13.2.5.pet (25 mb)

scim Chinese input platform:
scim_1.4.14-en-zh-raring-13.2.5.pet (22 mb)

yong Chinese input platform:
yong3264_4.2.0-en-zh-raring-13.2.5.pet (9 mb)
yong3264_th_2016.11.5-en-zh-raring-13.2.5.pet (8 mb)
yong3264_thjj_2016.7.29-en-zh-raring-13.2.5.pet (8 mb)
yong3264_thth_2014.8.5-en-zh-raring-13.2.5.pet (10 mb)

Plus 2 Chinese language pets each for asciipup 7.0.0; bullseyepup 9.0.0; eoanapup 8.0.0; etionapup 8.0.0; focalpup 9.0.0; pupjibarostretch 7.0.0 and pupbibarojessie 6.4.2:

Simplified Chinese:
asciipup-7.0.0-zhcn-13.2.5.pet (2 mb)
bullseyepup-9.0.0-zhcn-13.2.5.pet (2 mb)
eoanpup-8.0.0-zhcn-13.2.5.pet (2 mb)
etionapup-8.0.0-zhcn-13.2.5.pet (2 mb)
focalpup-9.0.0-zhcn-13.2.5.pet (2 mb)
pupjibarostretch-7.0.0-zhcn-13.2.5.pet (2 mb)
pupjibarojessie-6.4.2.25052017-zhcn-13.2.5.pet (2 mb)

Traditional Chinese:
asciipup-7.0.0-zhhk-13.2.5.pet (2 mb)
bullseyepup-9.0.0-zhhk-13.2.5.pet (2 mb)
eoanpup-8.0.0-zhhk-13.2.5.pet (2 mb)
etionapup-8.0.0-zhhk-13.2.5.pet (2 mb)
focalpup-9.0.0-zhhk-13.2.5.pet (2 mb)
pupjibarostretch-7.0.0-zhhk-13.2.5.pet (2 mb)
pupjibarojessie-6.4.2.25052017-zhhk-13.2.5.pet (2 mb)

To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in asciipup 7.0.0; bullseyepup 9.0.0; eoanapup 8.0.0;

etionapup 8.0.0; focalpup 9.0.0; pupjibarostretch 7.0.0 and pupbibarojessie 6.4.2

(b) the version corresponding Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for asciipup 7.0.0; bullseyepup 9.0.0; eoanapup 8.0.0; etionapup 8.0.0; focalpup 9.0.0; pupjibarostretch 7.0.0 and pupbibarojessie 6.4.2

for more information about the fcitx and scim pets, please see posting dated Feb 19, 2015 on page 15 of this subject
for more information about the yong pets, please see posting dated Dec 31, 2016 on page 25 of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

darry19662018 posted a notice on Sep 3, 2020 about a list of Puppy derivatives created by the Hungarian forum members. I have created Chinese language pets for the 4 selected 64 bits Puppy derivatives systems from the list: asciipup64 7.0.0; bullseyepup64 9.0.0; focalpup64 9.0.0 and slackpup64 7.0.0

More information and download iso:
https://skamilinux.hu/nocsak/puppychart/

I have created 6 half-Chinese language pets for asciipup64 7.0.0; bullseyepup64 9.0.0; focalpup64 9.0.0 and slackpup64 7.0.0:

fcitx Chinese input platform:
fcitx64_4.2.9-en-zh-bionic-18.0.5.pet (30 mb) (for bullseyepup64 9.0.0 and focalpup64 9.0.0)
fcitx64_4.2.9-en-zh-bionic-18.0.5x.pet (30 mb) (for asciipup64 7.0.0 and slackpup64 7.0.0)

scim Chinese input platform:
scim64_1.4.14-en-zh-buster-18.0.5.pet (22 mb) (for bullseyepup64 9.0.0 and focalpup64 9.0.0)
scim64_1.4.14-en-zh-buster-18.0.5x.pet (22 mb) (for asciipup64 7.0.0 and slackpup64 7.0.0)

yong Chinese input platform:
for bullseyepup64 9.0.0 and focalpup64 9.0.0:
yong3264_4.2.0-en-zh-buster-18.0.5.pet (8.6 mb)
yong3264_th_2016.11.5-en-zh-buster-18.0.5.pet (7.9 mb)
yong3264_thjj_2016.7.29-en-zh-buster-18.0.5.pet (8.4 mb)
yong3264_thth_2014.8.5-en-zh-buster-18.0.5.pet (9.5 mb)

for asciipup64 7.0.0 and slackpup64 7.0.0
yong3264_4.2.0-en-zh-buster-18.0.5x.pet (8.6 mb)
yong3264_th_2016.11.5-en-zh-buster-18.0.5x.pet (7.9 mb)
yong3264_thjj_2016.7.29-en-zh-buster-18.0.5x.pet (8.4 mb)
yong3264_thth_2014.8.5-en-zh-buster-18.0.5x.pet (9.5 mb)

Plus 2 Chinese language pets each for asciipup64 7.0.0; bullseyepup64 9.0.0; focalpup64 9.0.0 and slackpup64 7.0.0:

Simplified Chinese:
bullseyepup64-9.0.0-zhcn-18.0.5.pet (2 mb)
focalpup64-9.0.0-zhcn-18.0.5.pet (2 mb)
asciipup64-7.0.0-zhcn-18.0.5x.pet (2 mb)
slackpup64-7.0.0-zhcn-18.0.5x.pet (2 mb)

Traditional Chinese:
bullseyepup64-9.0.0-zhhk-18.0.5.pet (2 mb)
focalpup64-9.0.0-zhhk-18.0.5.pet (2 mb)
asciipup64-7.0.0-zhhk-18.0.5x.pet (2 mb)
slackpup64-7.0.0-zhhk-18.0.5x.pet (2 mb)

To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in asciipup64 7.0.0; bullseyepup64 9.0.0; focalpup64 9.0.0 and slackpup64 7.0.0

(b) the 2 name corresponding Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for asciipup64 7.0.0; bullseyepup64 9.0.0; focalpup64 9.0.0 and slackpup64 7.0.0

for more information about the fcitx64 4.2.9 pet, please see postings dated Feb 4 and 12, 2015 on page 15 of this subject
for more information about the scim64 1.4.14 pet, please see postings dated Feb 6 and 13, 2015 on page 15 of this subject
for more information about the yong pets, please see posting dated Dec 31, 2016 on page 25 of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

gjuhasz posted information about the puli 32/64 bit Puppy systems on Aug 14, 2020 including puli 6.2; 6.3 (for 32 bits system) and puli64 7.3 (for 64
bits system).

More information:
viewtopic.php?f=40&t=484

Download iso:
https://sourceforge.net/projects/puppys ... iles/Puli/

I have created 6 half-Chinese language pets each for puli 6.2; 6.3 and puli64 7.3:
fcitx Chinese input platform:
puli 6.2 and 6.3: fcitx_4.2.0-en-zh-precise-12.0.1.pet (19 mb)
puli64 7.3.0: fcitx64_4.2.7-en-zh-xenial-16.2.1.pet (21 mb)

scim Chinese input platform:
puli 6.2 and 6.3: scim_1.4.9-en-zh-precise-12.0.1.pet (22 mb)
puli64 7.3.0: scim64_1.4.14-en-zh-xenial.16.2.1.pet (18 mb)

yong Chinese input platform:
puli 6.2 and 6.3:
yong3264_4.2.0-en-zh-precise-12.0.1.pet (9 mb)
yong3264_th_2016.11.5-en-zh-precise-12.0.1.pet (8 mb)
yong3264_thjj_2016.7.29-en-zh-precise-12.0.1.pet (8 mb)
yong3264_thth_2014.8.5-en-zh-precise-12.0.1.pet (10 mb)

puli64 7.3.0:
yong3264_4.2.0-en-zh-xenial-16.2.1.pet (9 mb)
yong3264_th_2016.11.5-en-zh-xenial-16.2.1.pet (8 mb)
yong3264_thjj_2016.7.29-en-zh-xenial-16.2.1.pet (8 mb)
yong3264_thth_2014.8.5-en-zh-xenial-16.2.1.pet (10 mb)

Plus 2 Chinese language pets each for puli 6.2; 6.3 and puli64 7.3:
Simplified Chinese:
puli-6.3.0-zhcn-12.0.1.pet (3 mb)
puli-6.2.0-zhcn-12.0.1.pet (3 mb)
puli64-7.3.0-zhcn-16.2.1.pet (3 mb)

Traditional Chinese:
puli-6.3.0-zhhk-12.0.1.pet (3 mb)
puli-6.2.0-zhhk-12.0.1.pet (3 mb)
puli64-7.3.0-zhhk-16.2.1.pet (3 mb)

To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in puli 6.2, 6.3 (please use 12.0.1 pets) and puli64 7.3.0 (please use 16.2.1 pets)

(b) the version corresponding Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for puli 6.2, 6.3 and puli64 7.3.0

for more information about the fcitx and scim pets, please see posting dated Feb 19, 2015 on page 15 of this subject
For more information about the fcitx64 4.2.7 pet, please see postings dated Feb 4 and 12, 2015 on page 15 of this subject
For more information about the scim64 1.4.14 pet, please see postings dated Feb 6 and 13, 2015 on page 15 of this subject
for more information about the yong pets, please see posting dated Dec 31, 2016 on page 25 of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

update as of Nov 11, 2020
I have resolved the issues for installing Chinese language pets in fossapup64 9.0.5 and 9.5.0 and 6 half-Chinese language pets were created for fossapup64 9.0.5 and 9.5.0:

fcitx Chinese input platform:
fcitx64_4.2.9-en-zh-bionic-18.0.51.pet (30 mb)

scim Chinese input platform:
scim64_1.4.14-en-zh-bionic-18.0.51.pet (22 mb)

yong Chinese input platform:
yong3264_4.2.0-en-zh-bionic-18.0.51.pet (8.6 mb)
yong3264_th_2016.11.5-en-zh-bionic-18.0.51.pet (7.9 mb)
yong3264_thjj_2016.7.29-en-zh-bionic-18.0.51.pet (8.4 mb)
yong3264_thth_2014.8.5-en-zh-bionic-18.0.51.pet (9.5 mb)

plus 2 new Chinese language pets for fossapup64 9.0.5 and 9.5.0:
Simplified Chinese:
fossapup64-9.0.5-zhcn-18.0.51.pet (2 mb)
fossapup64-9.5.0-zhcn-18.0.51.pet (2 mb)

Traditional Chinese:
fossapup64-9.0.5-zhhk-18.0.51.pet (2 mb)
fossapup64-9.5.0-zhhk-18.0.51.pet (2 mb)

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

---

---

pfeco released a number of puppy derivatives: etionapup64 8.0.0 on 10 Apr, 2020; focalpup64 9.3.0-Lite; groovypup64 10.2.0-Lite and bullseyepup64
9.3.0-Lite on Aug 8, 2020 and beowulfpup64 8.0.0 on Nov 14, 2019

peebee released fossapup64 9.0.5 on Aug 13, 2020; fossapup64 9.5.0 on Sep 17, 2020

More information and forum discussions:
etionalpup64 8.0.0: viewtopic.php?f=33&t=526
focalpup64 9.3.0-Lite; groovypup64 10.2.0-Lite and bullseyepup64 9.3.0-Lite: https://skamilinux.hu/phpBB3/viewtopic. ... 1&start=60
beowulfpup64 8.0.0: https://archive.org/details/Puppy_Linux_BeowulfPup
fossapup64 9.0.5 and 9.5.0: viewtopic.php?f=40&t=88

Download:
etionalpup64 8.0.0: https://archive.org/download/Puppy_Linu ... -8.0.0.iso
focalpup64 9.3.0-Lite; groovypup64 10.2.0-Lite and bullseyepup64 9.3.0-Lite: https://skamilinux.hu/phpBB3/viewtopic. ... 1&start=60
beowulfpup64 8.0.0: https://archive.org/details/Puppy_Linux_BeowulfPup
fossapup64 9.0.5: http://distro.ibiblio.org/puppylinux/test/fossapup/
fossapup64 9.5.0: http://distro.ibiblio.org/puppylinux/puppy-fossa/

I have created 6 half-Chinese language pets for etionapup64 8.0.0; focalpup64 9.3.0-Lite; groovypup64 10.2.0-Lite; bullseyepup64 9.3.0-Lite; beowulfpup64 8.0.0 and fossapup64 9.0.5. Please note for fossapup64 9.0.5 and 9.5.0, only fcitx can run normally; scim and all 4 yong pets has unresolved issues.

fcitx Chinese input platform:
fcitx64_4.2.9-en-zh-bionic-18.0.5.pet (30 mb)

scim Chinese input platform: (note: scim pet cannot run fully under fossapup64 9.0.5 and 9.5.0)
scim64_1.4.14-en-zh-bionic-18.0.5.pet (22 mb)

yong Chinese input platform: (note: all yong3264 pets cannot run fully under fossapup64 9.0.5 and 9.5.0)
yong3264_4.2.0-en-zh-bionic-18.0.5.pet (8.6 mb)
yong3264_th_2016.11.5-en-zh-bionic-18.0.5.pet (7.9 mb)
yong3264_thjj_2016.7.29-en-zh-bionic-18.0.5.pet (8.4 mb)
yong3264_thth_2014.8.5-en-zh-bionic-18.0.5.pet (9.5 mb)

Plus 2 Chinese language pets each for etionapup64 8.0.0; focalpup64 9.3.0-Lite; groovypup64 10.2.0-Lite; bullseyepup64 9.3.0-Lite; beowulfpup64 8.0.0; fossapup64 9.0.5 and 9.5.0:

Simplified Chinese:
etionapup64xfce-8.0.0-zhcn-18.0.5.pet (2 mb)
groovypup64-10.0.2.Lite-zhcn-18.0.5.pet (2 mb)
focalpup64-9.3.0.Lite-zhcn-18.0.5.pet (2 mb)
bullseyepup64-9.3.0.Lite-zhcn-18.0.5.pet (2 mb)
beowulfpup64-8.0.0-zhcn-18.0.5.pet (2 mb)
fossapup64-9.0.5-zhcn-18.0.5.pet (2 mb)
fossapup64-9.5.0-zhcn-18.0.5.pet (2 mb)

Traditional Chinese:
etionapup64xfce-8.0.0-zhhk-18.0.5.pet (2 mb)
groovypup64-10.0.2.Lite-zhhk-18.0.5.pet (2 mb)
focalpup64-9.3.0.Lite-zhhk-18.0.5.pet (2 mb)
bullseyepup64-9.3.0.Lite-zhhk-18.0.5.pet (2 mb)
beowulfpup64-8.0.0-zhhk-18.0.5.pet (2 mb)
fossapup64-9.0.5-zhhk-18.0.5.pet (2 mb)
fossapup64-9.5.0-zhhk-18.0.5.pet (2 mb)

To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in etionapup64 8.0.0; focalpup64 9.3.0-Lite; groovypup64 10.2.0-Lite; bullseyepup64 9.3.0-Lite; beowulfpup64 8.0.0; fossapup64 9.0.5 and 9.5.0 (note: fossapup64 9.0.5 and 9.5.0 can only use fcitx64 pet; scim64 and yong3264 pets cannot run normally)

(b) the 2 name corresponding Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for etionapup64 8.0.0; focalpup64 9.3.0-Lite; groovypup64 10.2.0-Lite; bullseyepup64 9.3.0-Lite; beowulfpup64 8.0.0; fossapup64 9.0.5 and 9.5.0

for more information about the fcitx64 4.2.9 pet, please see postings dated Feb 4 and 12, 2015 on page 15 of this subject
for more information about the scim64 1.4.14 pet, please see postings dated Feb 6 and 13, 2015 on page 15 of this subject
for more information about the yong pets, please see posting dated Dec 31, 2016 on page 25 of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

petihar released Triton 6.0 (32 bits system) on Sep 29, 2017 and Triton 7.0 (64 bits system) on Sep 11, 2020.

More information and download iso:
https://petihar-triton.weebly.com/teacu ... ement.html

I have created 6 half-Chinese language pets each for Triton 6.0 and 7.0
fcitx Chinese input platform:
for Triton 6.0: fcitx_4.2.7-en-zh-raring-13.0.2.pet (24 mb)
for Triton64 7.0: fcitx64_4.2.7-en-zh-xenial-16.2.0.pet (21 mb)

scim Chinese input platform:
for Triton 6.0: scim_1.4.14-en-zh-raring.13.0.2.pet (23 mb)
for Triton64 7.0: scim64_1.4.14-en-zh-xenial.16.2.0.pet (18 mb)

yong Chinese input platform:
for Triton 6.0:
yong3264_4.2.0-en-zh-raring-13.0.2.pet (9 mb)
yong3264_th_2016.11.5-en-zh-raring-13.0.2.pet (8 mb)
yong3264_thjj_2016.7.29-en-zh-raring-13.0.2.pet (8 mb)
yong3264_thth_2014.8.5-en-zh-raring-13.0.2.pet (10 mb)

for Triton64 7.0:
yong3264_4.2.0-en-zh-xenial-16.2.0.pet (9 mb)
yong3264_th_2016.11.5-en-zh-xenial-16.2.0.pet (8 mb)
yong3264_thjj_2016.7.29-en-zh-xenial-16.2.0.pet (8 mb)
yong3264_thth_2014.8.5-en-zh-xenial-16.2.0.pet (10 mb)

Plus 2 Chinese language pets each for Triton 6.0 and 7.0:
Simplified Chinese:
triton-6.0.0-zhcn-13.0.2.pet (2 mb)
triton64-7.0.0-zhcn-16.2.0.pet (2 mb)

Traditional Chinese:
triton-6.0.0-zhhk-13.0.2.pet (2 mb)
triton64-6.0.0-zhhk-16.2.0.pet (2 mb)

To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in Triton 6.0 and 7.0

(b) the version corresponding Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for Triton 6.0 and 7.0

for more information about the fcitx and scim pets, please see posting dated Feb 19, 2015 on page 15 of this subject
For more information about the fcitx64 4.2.7 pet, please see postings dated Feb 4 and 12, 2015 on page 15 of this subject
For more information about the scim64 1.4.14 pet, please see postings dated Feb 6 and 13, 2015 on page 15 of this subject
for more information about the yong pets, please see posting dated Dec 31, 2016 on page 25 of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

8Geee released on Sep 23, 2017 an updated version of slacko 5.7 (originally released by 01micko) which is called slacko 5.7 2018.

More information and download iso:
https://archive.org/details/s57-2018

I have created 6 half-Chinese language pets for slacko 5.7 2018:
fcitx Chinese input platform:
fcitx_4.2.7-en-zh-precise-12.0.1.pet (25 mb)

scim Chinese input platform:
scim_1.4.9-en-zh-precise-12.0.1.pet (22 mb)

yong Chinese input platform:
yong3264_4.2.0-en-zh-precise-12.0.1.pet (9 mb)
yong3264_th_2016.11.5-en-zh-precise-12.0.1.pet (8 mb)
yong3264_thjj_2016.7.29-en-zh-precise-12.0.1.pet (8 mb)
yong3264_thth_2014.8.5-en-zh-precise-12.0.1.pet (10 mb)

Plus 2 Chinese language pets for 5.7 2018:
Simplified Chinese:
slacko-5.7.2018-zhcn-12.0.1.pet (3 mb)

Traditional Chinese:
slacko-5.7.2018-zhhk-12.0.1.pet (3 mb)

To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in slacko 5.7 2018

(b) the version corresponding Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for slacko 5.7 2018

for more information about the fcitx and scim pets, please see posting dated Feb 19, 2015 on page 15 of this subject
for more information about the yong pets, please see posting dated Dec 31, 2016 on page 25 of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

radky released Dpup Stretch 7.5 CE on Nov 18, 2017, then an updated version dpupstretch 7.5 (2019) was released in 2019.

joseup2424 released a number of DpupBuster CE 32 bit systems in 2019, updated versions dpupbuster32 8.0.0 27072020 and 04012020 were then released in 2020

pfeco released beowulfpup 8.0.0 in 2019 and etionapup 8.0.0 on 10 Apr, 2020

More information:
dpupstretch 7.5 (2019): viewtopic.php?p=1506#p1506
dpupbuster32 8.0.0 (27072020 and 04012020): https://archive.org/details/Puppy_Linux_Dpup_Buster
beowulfpup 8.0.0: https://archive.org/details/Puppy_Linux_BeowulfPup
etionalpup 8.0.0: https://archive.org/details/Puppy_Linux_Etionapup

download iso:
dpupstretch 7.5 (2019): https://archive.org/download/dpup_stret ... rab%29.iso
dpupbuster32 8.0.0 (27072020 and 04012020): https://archive.org/details/Puppy_Linux_Dpup_Buster
beowulfpup 8.0.0: https://archive.org/details/Puppy_Linux_BeowulfPup
etionalpup 8.0.0: https://archive.org/details/Puppy_Linux_Etionapup

I have created 6 half-Chinese language pets for dpupstretch 7.5 (2019); dpupbuster32 8.0.0 (27072020 and 04012020); beowulfpup 8.0.0 and etionapup 8.0.0:
fcitx Chinese input platform:
fcitx_4.2.7-en-zh-raring-13.2.5.pet (25 mb)

scim Chinese input platform:
scim_1.4.14-en-zh-raring-13.2.5.pet (22 mb)

yong Chinese input platform:
yong3264_4.2.0-en-zh-raring-13.2.5.pet (9 mb)
yong3264_th_2016.11.5-en-zh-raring-13.2.5.pet (8 mb)
yong3264_thjj_2016.7.29-en-zh-raring-13.2.5.pet (8 mb)
yong3264_thth_2014.8.5-en-zh-raring-13.2.5.pet (10 mb)

Plus 2 Chinese language pets each for dpupstretch 7.5 (2019); dpupbuster32 8.0.0 (27072020 and 04012020); beowulfpup 8.0.0 and etionapup 8.0.0:
Simplified Chinese:
dpupstretch-7.5.2019-zhcn-13.2.5.pet (2 mb)
dpupbuster32-8.0.0.04012020-zhcn-13.2.5.pet (2 mb)
dpupbuster32-8.0.0.27072020-zhcn-13.2.5.pet (2 mb)
beowulfpup-8.0.0-zhcn-13.2.5.pet (2 mb)
etionapup-8.0.0-zhcn-13.2.5.pet (2 mb)

Traditional Chinese:
dpupstretch-7.5.2019-zhhk-13.2.5.pet (2 mb)
dpupbuster32-8.0.0.04012020-zhhk-13.2.5.pet (2 mb)
dpupbuster32-8.0.0.27072020-zhhk-13.2.5.pet (2 mb)
beowulfpup-8.0.0-zhhk-13.2.5.pet (2 mb)
etionapup-8.0.0-zhhk-13.2.5.pet (2 mb)

To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in dpupstretch 7.5 (2019); dpupbuster32 8.0.0 (27072020 and 04012020); beowulfpup 8.0.0 and etionapup 8.0.0

(b) the version corresponding Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for dpupstretch 7.5 (2019); dpupbuster32 8.0.0 (27072020 and 04012020); beowulfpup 8.0.0 and etionapup 8.0.0

for more information about the fcitx and scim pets, please see posting dated Feb 19, 2015 on page 15 of this subject
for more information about the yong pets, please see posting dated Dec 31, 2016 on page 25 of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for
download addresses.

The Fatdog Team had released Fatdog64-811 on Sep 10, 2020

More information:
viewtopic.php?f=60&t=746

Download Fatdog64-811:
http://distro.ibiblio.org/fatdog/iso/
https://mirror.aarnet.edu.au/pub/fatdog/iso/
http://ftp.cc.uoc.gr/mirrors/linux/fatdog/iso/
http://ftp.nluug.nl/ibiblio/distributions/fatdog/iso/

(a) I have created 6 half-Chinese language pets for Fatdog64-811:
fcitx Chinese input platform:
fcitx64_4.2.7-fd64802-en-zh-raring-13.1.0.txz (15 mb)

scim Chinese input platform:
scim64_1.4.14-fd64802-en-zh-raring-13.1.0.txz (12 mb)

yong Chinese input platform:
yong_4.2.0-fd64802-en-zh-raring-13.1.0.txz (5.5 mb)
yong_th_2016.11.5-fd64802-en-zh-raring-13.1.0.txz (4.7 mb)
yong_thjj_2016.7.29-fd64802-en-zh-raring-13.1.0.txz (5.1 mb)
yong_thth_2014.8.5-fd64802-en-zh-raring-13.1.0.txz (6.1 mb)

(b) I have also created 2 Chinese language pets each for Fatdog64-811:
Simplified Chinese:
fd64-8.1.1-zhcn-13.1.0.txz (1.6 mb)

Traditional Chinese:
fd64-8.1.1-zhhk-13.1.0.txz (1.1 mb)

To use:
(c) after install any 1 of the 6 half-Chinese language pets under (a): your Fatdog64 811 (requires the 802 half-Chinese language pets) system can display and input Chinese (desktop menus, sub-menus and icon labels are still English)

(d) after install any 1 of the 6 half-Chinese language pets under (a) and also install 1 of the 2 the version corresponding Chinese language pets under (b), your Fatdog64 811 system can display and input Chinese; plus your desktop menus, sub-menus and icon labels are changed to Simplified Chinese or Traditional Chinese

more information about the fcitx64 4.2.7 pet, please see postings dated Feb 4 and 12, 2015 on page 15 of this subject
more information about the scim64 1.4.14 pet, please see postings dated Feb 6 and 13, 2015 on page 15 of this subject
more information about the yong pets, please see posting dated Dec 31, 2016 on page 25 of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

Further to the release of various easy os buster up to 2.3.2, updated version 2.4.1 was released on Aug 30, 2020

more information, annoucement notes and download addresses:
https://bkhome.org/news/202008/easyos-v ... eased.html

I have created 6 half-Chinese language pets each for easy os buster 2.4.1:
fcitx Chinese input platform:
fcitx64_4.2.7-en-zh-xenial-16.1.3s.pet (21.6 mb)

scim Chinese input platform:
scim64_1.4.9-en-zh-xenial-16.1.3s.pet (18.1 mb)

yong Chinese input platform:
yong3264_4.2.0-en-zh-xenial-16.1.3s.pet (8.6 mb)
yong3264_th_2016.11.5-en-zh-xenial-16.1.3s.pet (7.9 mb)
yong3264_thjj_2016.7.29-en-zh-xenial-16.1.3s.pet (8.4 mb)
yong3264_thth_2014.8.5-en-zh-xenial-16.1.3s.pet (9.5 mb)

Plus 2 Chinese language pets for easy buster 2.4.1:
Simplified Chinese:
easyos-2.4.1-zhcn-16.1.3s.pet (3.0 mb)

Traditional Chinese:
easyos-2.4.1-zhhk-16.1.3s.pet (2.5 mb)

To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in easy buster 2.4.1

(b) the 2 name corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for easy buster 2.4.1

more information about the fcitx64 4.2.7 pet, please see postings dated Feb 4 and 12, 2015 on page 15 of this subject
more information about the scim64 1.4.9 pet, please see postings dated Feb 6 and 13, 2015 on page 15 of this subject
more information about the yong pets, please see posting dated Dec 31, 2016 on page 25 of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

peebee released upupef 20.04.07 (Aug 7, 2020); upupff D 20.08.00, 20.08.02 (Sep 2020); upupgg D 20.10.00 (Sep 2020), 20.10.01, 20.10.04 (Oct 2020)

More information:
upupef 20.04.07: http://distro.ibiblio.org/puppylinux/pu ... -20.04.htm
upupff and upupgg: https://sourceforge.net/projects/zestypup/

download iso:
upupef 20.04.07: https://sourceforge.net/projects/zestyp ... o/download
upupff and upupgg: https://sourceforge.net/projects/zestypup/

I have created 6 half-Chinese language pets each for upupef 20.04.07; upupff D 20.08.00 to 02 and upupgg 20.10.00 to 04:
fcitx Chinese input platform:
fcitx_4.2.7-en-zh-xenial-17.s.36.pet (25 mb)

scim Chinese input platform:
scim_1.4.14-en-zh-xenial-17.s.36.pet (22 mb)

yong Chinese input platform:
yong3264_4.2.0-en-zh-xenial-17.s.36.pet (9 mb)
yong3264_th_2016.11.5-en-zh-xenial-17.s.36.pet (8 mb)
yong3264_thjj_2016.7.29-en-zh-xenial-17.s.36.pet (8 mb)
yong3264_thth_2014.8.5-en-zh-xenial-17.s.36.pet (10 mb)

Plus 2 Chinese language pets each for upupef 20.04.07; upupff D 20.08.00 to 02 and upupgg 20.10.00 to 04:
Simplified Chinese:
upupef-20.04.07-zhcn-17.s.36.pet (4 mb)
upupffDv1-20.08.00-zhcn-17.s.36.pet (4 mb)
upupffD-20.08.02-zhcn.17.s.36.pet (4 mb)
upupggD-20.10.00-zhcn-17.s.36.pet (4 mb)
upupggD-20.10.01-zhcn-17.s.36.pet (4 mb)
upupggD-20.10.04-zhcn-17.s.36.pet (4 mb)

Traditional Chinese:
upupef-20.04.07-zhhk-17.s.36.pet (4 mb)
upupffDv1-20.08.00-zhhk-17.s.36.pet (4 mb)
upupffD-20.08.02-zhhk.17.s.36.pet (4 mb)
upupggD-20.10.00-zhhk-17.s.36.pet (4 mb)
upupggD-20.10.01-zhhk-17.s.36.pet (4 mb)
upupggD-20.10.04-zhhk-17.s.36.pet (4 mb)

To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in upupef 20.04.07; upupff D 20.08.00 to 02 and upupgg
20.10.00 to 04

(b) the name+version corresponding Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for
upupef 20.04.07; upupff D 20.08.00 to 02 and upupgg 20.10.00 to 04

for more information about the fcitx and scim pets, please see posting dated Feb 19, 2015 on page 15 of this subject
for more information about the yong pets, please see posting dated Dec 31, 2016 on page 25 of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for
download addresses.

icake wrote: ↑Sun Nov 01, 2020 1:40 am I have created [...] language pets for Fatdog64-811

Thank you!

peebee has released BionicPup32 8.0.24 on Sep 25, 2020

More information and forum discussions:
http://murga-linux.com/puppy/viewtopic. ... 60968eb1d8

Download: https://sourceforge.net/projects/zestyp ... c/updates/

I have created 6 half-Chinese language pets for BionicPup32 8.0.24:

fcitx Chinese input platform:
fcitx_4.2.7-en-zh-xenial-17.s.35.pet (24 mb)

scim Chinese input platform:
scim_1.4.14-en-zh-xenial-17.s.35.pet (23 mb)

yong Chinese input platform:
yong3264_4.2.0-en-zh-xenial-17.s.35.pet (8.6 mb)
yong3264_th_2016.11.5-en-zh-xenial-17.s.35.pet (7.9 mb)
yong3264_thjj_2016.7.29-en-zh-xenial-17.s.35.pet (8.4 mb)
yong3264_thth_2014.8.5-en-zh-xenial-17.s.35.pet (9.5 mb)

Plus 2 Chinese language pets each for BionicPup32 8.0.24:
Simplified Chinese:
bionicpup32-8.0.24-zhcn-17.s.35.pet (2.9 mb)

Traditional Chinese:
bionicpup32-8.0.24-zhhk-17.s.35.pet (2.9 mb)

To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in BionicPup32 8.0.24

(b) the Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for BionicPup32 8.0.24

for more information about the fcitx, scim and yong half-Chinese pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

Further to the release of LxPupBionic 19.03.20 on Apr 20, 2020, version 19.03.24 (Sep 25, 2020) had been released

More information and download:
http://lx-pup.weebly.com/upup-bionic.html
http://distro.ibiblio.org/puppylinux/pu ... -19.03.htm

download iso:
https://sourceforge.net/projects/lxpup/ ... xPup19.03/

I have created 6 half-Chinese language pets for LxPupBionic 19.03.24:
fcitx Chinese input platform:
fcitx_4.2.7-en-zh-xenial-17.s.35.pet (24.6 mb)

scim Chinese input platform:
scim_1.4.14-en-zh-xenial-17.s.35.pet (22.1 mb)

yong Chinese input platform:
yong3264_4.2.0-en-zh-xenial-17.s.35.pet (8.6 mb)
yong3264_th_2016.11.5-en-zh-xenial-17.s.35.pet (7.9 mb)
yong3264_thjj_2016.7.29-en-zh-xenial-17.s.35.pet (8.4 mb)
yong3264_thth_2014.8.5-en-zh-xenial-17.s.35.pet (9.5 mb)

Plus 2 Chinese language pets for LxPupBionic 19.03.24:
Simplified Chinese:
lxpupbionic-19.03.24-zhcn-17.s.35.pet (3.7 mb)

Traditional Chinese:
lxpupbionic-19.03.24-zhhk-17.s.35.pet (3.5 mb)

To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in LxPupBionic 19.03.24

(b) the name/version corresponding Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for LxPupBionic 19.03.24

for more information about the fcitx, scim and yong half-Chinese pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

jrb has released quirky7 A32 light 7.0.1 and A64 light 7.0.1 on Mar 20, 2020

more details and discussions:
http://www.murga-linux.com/puppy/viewtopic.php?t=118366

download:
https://archive.org/details/Puppy_Linux_Quirky7_Light
https://archive.org/download/Puppy_Linux_Quirky7_Light

I have created 6 half-Chinese language pets each for quirky7a32 light 7.0.1 and quirky7a64 light 7.0.1
fcitx Chinese input platform:
quirky7a32 light 7.0.1: fcitx cannot be run in april-7.0.1F
quirky7a64 light 7.0.1: fcitx64_4.2.7-en-zh-raring-13.0.9.pet (22 mb)

scim Chinese input platform:
quirky7a32 light 7.0.1: scim_1.4.7-en-zh-precise-12.0.1a.pet (15 mb)
quirky7a64 light 7.0.1: scim64_1.4.14-en-zh-raring-13.0.9.pet (18 mb)

yong Chinese input platform:
quirky7a32 light 7.0.1:
yong3264_4.2.0-en-zh-precise-12.0.1a.pet (6 mb)
yong3264_th_2016.11.5-en-zh-precise-12.0.1a.pet (5 mb)
yong3264_thjj_2016.7.29-en-zh-precise-12.0.1a.pet (5 mb)
yong3264_thth_2014.8.5-en-zh-precise-12.0.1a.pet (6 mb)

quirky7a64 light 7.0.1:
yong3264_4.2.0-en-zh-raring-13.0.9.pet (9 mb)
yong3264_th_2016.11.5-en-zh-raring-13.0.9.pet (8 mb)
yong3264_thjj_2016.7.29-en-zh-raring-13.0.9.pet (8 mb)
yong3264_thth_2014.8.5-en-zh-raring-13.0.9.pet (10 mb)

Plus 2 Chinese language pets each for quirky7a32 light 7.0.1 and quirky7a64 light 7.0.1:
Simplified Chinese:
quirkya32-light7.0.1-zhcn-12.0.1a.pet (2 mb)
quirkya64-light7.0.1-zhcn-13.0.9.pet (2 mb)

Traditional Chinese:
quirkya32-light7.0.1-zhhk-12.2.0.pet (1 mb)
quirkya64-light7.0.1-zhhk-13.0.9.pet (2 mb)

To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in quirky7a32 light 7.0.1 (please use 12.0.1a pets, there is no fcitx pet) and quirky7a64 light 7.0.1 (please use 13.0.9 pets)

(b) the version corresponding Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for quirky7a32 light 7.0.1 and quirky7a64 light 7.0.1

for more information about the fcitx, fcitx4, scim, scim64 and yong pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download

addresses.

gjuhasz released puli 64 bit version 7.2 on Jan 1, 2020

More information:
http://murga-linux.com/puppy/viewtopic. ... &start=275

Download iso:
http://smokey01.com/gjuhasz/Puli-7.2_Jan2020/

I have created 6 half-Chinese language pets each for puli64 7.2:
fcitx Chinese input platform:
fcitx64_4.2.7-en-zh-xenial-16.2.0a.pet (15 mb)

scim Chinese input platform:
scim64_1.4.14-en-zh-xenial.16.2.0a.pet (12 mb)

yong Chinese input platform:
yong3264_4.2.0-en-zh-xenial-16.2.0a.pet (5 mb)
yong3264_th_2016.11.5-en-zh-xenial-16.2.0a.pet (5 mb)
yong3264_thjj_2016.7.29-en-zh-xenial-16.2.0a.pet (5 mb)
yong3264_thth_2014.8.5-en-zh-xenial-16.2.0a.pet (6 mb)

Plus 2 Chinese language pets each for puli64 7.2:
Simplified Chinese:
puli64-7.2.0-zhcn-16.2.0a.pet (2 mb)

Traditional Chinese:
puli64-7.2.0-zhhk-16.2.0a.pet (1 mb)

To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in puli64 7.2.0

(b) the version corresponding Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for puli64 7.2.0

For more information about the fcitx64, scim64 and yong half-Chinese language pets, please see the first postings of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

Further to the release of LxPupSc64 20.06.00T on Jun 14, 2020, peebee had released LxPupSc64 20.06.01T (Aug 29, 2020) and LxPupSc64 20.06.02T (Nov 1, 2020)

Main features:
New Woof-CE build based on Slackware64 Current

More information:
http://www.murga-linux.com/puppy/viewtopic.php?t=96875

Download iso:
https://sourceforge.net/projects/lxpup/ ... 4/updates/

I have created 6 half-Chinese language pets for LxPupSc64 20.06.01T and 02T:
fcitx Chinese input platform:
fcitx64_4.2.7-en-zh-raring-14.0.5.pet (23 mb)

scim Chinese input platform:
scim64_1.4.14-en-zh-raring-14.0.5.pet (19 mb)

yong Chinese input platform:
yong3264_4.2.0-en-zh-raring-14.0.5.pet (8.6 mb)
yong3264_th_2016.11.5-en-zh-raring-14.0.5.pet (7.9 mb)
yong3264_thjj_2016.7.29-en-zh-raring-14.0.5.pet (8.4 mb)
yong3264_thth_2014.8.5-en-zh-raring-14.0.5.pet (9.5 mb)

Plus 2 Chinese language pets each for LxPupSc64 20.06.01T to 20.06.02T:
Simplified Chinese:
lxpupsc64-20.06.01T-zhcn-14.0.5.pet (2.4 mb)
lxpupsc64-20.06.02T-zhcn-14.0.5.pet (2.4 mb)

Traditional Chinese:
lxpupsc64-20.06.01T-zhhk-14.0.5.pet (1.6 mb)
lxpupsc64-20.06.02T-zhhk-14.0.5.pet (1.6 mb)

To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in LxPupSc64 20.06.01T and 02T

(b) the name/version corresponding Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for LxPupSc64 20.06.01T and 02T

For more information about the fcitx64, scim64 and yong half-Chinese language pets, please see the first postings of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

01micko has recently released experimental Puppy systems eSlacko64 6.9.9.10 to 6.9.9.12

More information and forum discussions:
viewtopic.php?f=118&t=1109

Download:
http://01micko.com/eslacko/eslacko64-6.9.9.12.iso

I have created 6 half-Chinese language pets for eslacko64 6.9.9.10 to 6.9.9.12:
fcitx Chinese input platform:
fcitx64_4.2.7-en-zh-raring-13.1.3.pet (22.6 mb)

scim Chinese input platform:
scim64_1.4.14-en-zh-raring-13.1.3.pet (18.3 mb)

yong Chinese input platform:
yong3264_4.2.0-en-zh-raring-13.1.3.pet (8.6 mb)
yong3264_th_2016.11.5-en-zh-raring-13.1.3.pet (7.9 mb)
yong3264_thjj_2016.7.29-en-zh-raring-13.1.3.pet (8.4 mb)
yong3264_thth_2014.8.5-en-zh-raring-13.1.3.pet (9.5 mb)

Plus 2 Chinese language pets each for eslacko64 6.9.9.10 to 6.9.9.12:
Simplified Chinese:
eslacko64-6.9.9.12-zhcn-13.1.3.pet (3.6 mb)
eslacko64-6.9.9.11-zhcn-13.1.3.pet (3.6 mb)
eslacko64-6.9.9.10-zhcn-13.1.3.pet (3.6 mb)

Traditional Chinese:
eslacko64-6.9.9.12-zhhk-13.1.3.pet (2.0 mb)
eslacko64-6.9.9.11-zhhk-13.1.3.pet (2.0 mb)
eslacko64-6.9.9.10-zhhk-13.1.3.pet (2.0 mb)

To use:
(a) any 1 of the 6 half-Chinese language pets above will enable you to display and input Chinese in eslacko64 6.9.9.10 to 6.9.9.12

(b) the [32/64 bit] Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for eslacko64 6.9.9.10 to 6.9.9.12

more information about the fcitx64, scim64 and yong half-Chinese language pets, please see the first postings of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for
download addresses.

peebee recently released a number of scpup systems with 32 bit and 64 bit

discussions:
http://murga-linux.com/puppy/viewtopic. ... &start=150
viewforum.php?f=122

download 32 scpup
https://sourceforge.net/projects/spup/files/ScPup/

download 64 scpup
https://sourceforge.net/projects/spup/files/ScPup64/

I have created 6 half-Chinese language pets for scpup and scpup64 versions 19.09.00 to 20.06.02:
fcitx Chinese input platform:
scpup: fcitx_4.2.9-en-zh-bionic-20.0.0s.pet (17 mb)
scpup64: fcitx_4.2.7-en-zh-raring-14.0.6.pet (13 mb)

scim Chinese input platform:
scpup: scim_1.4.14-en-zh-bionic-20.0.0s.pet (21 mb)
scpup64: scim64_1.4.14-en-zh-raring-14.0.6.pet (14 mb)

yong Chinese input platform:
scpup:
yong3264_20201122-en-zh-bionic-20.0.0s.pet (8 mb)

scpup64:
yong3264_4.2.0-en-zh-raring-14.0.6.pet (9 mb)
yong3264_th_2016.11.5-en-zh-raring-14.0.6.pet (8 mb)
yong3264_thjj_2016.7.29-en-zh-raring-14.0.6.pet (8 mb)
yong3264_thth_2014.8.5-en-zh-raring-14.0.6.pet (10 mb)

Plus 2 Chinese language pets each for scpup and scpup64 versions 19.09.00 to 20.06.02:
Simplified Chinese:
scpup-19.09.00T-zhcn-20.0.0s.pet (2 mb)
scpup-20.01.00T-zhcn-20.0.0s.pet (2 mb)
scpup-20.06.02T-zhcn-20.0.0s.pet (2 mb)
scpup64-19.09.00T-zhcn-14.0.6.pet (2 mb)
scpup64-20.01.00T-zhcn-14.0.6.pet (2 mb)
scpup64-20.06.02T-zhcn-14.0.6.pet (2 mb)

Traditional Chinese:
scpup-19.09.00T-zhhk-20.0.0s.pet (2 mb)
scpup-20.01.00T-zhhk-20.0.0s.pet (2 mb)
scpup-20.06.02T-zhhk-20.0.0s.pet (2 mb)
scpup64-19.09.00T-zhhk-14.0.6.pet (1 mb)
scpup64-20.01.00T-zhhk-14.0.6.pet (1 mb)
scpup64-20.06.02T-zhhk-14.0.6.pet (1 mb)

To use:
(a) any 1 of the half-Chinese language pets will enable you to display and input Chinese in scpup (please use the 20.0.0s pets) and scpup64 (please use the 14.0.6 pets) versions 19.09.00 to 20.06.02;

(b) the 2 name corresponding Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips forscpup and scpup64 versions 19.09.00 to 20.06.02

for more information about the fcitx, scim, fcitx64, scim64 and yong pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

puddlemoon released jackalpup 0.0 plug and play audio puppy system on Oct 21, 2020

More information and forum discussions:
viewtopic.php?f=119&t=1148

Download:
https://drive.google.com/drive/folders/ ... sp=sharing
https://archive.org/details/Puppy_Linux_jackalpup

I have created 6 half-Chinese language pets for jackalpup 0.0:

fcitx Chinese input platform:
fcitx64_4.2.9-en-zh-bionic-21.0.0s.pet (19 mb)

scim Chinese input platform:
scim64_1.4.9-en-zh-bionic-21.0.0s.pet (12 mb)

yong Chinese input platform:
yong3264_20201122-en-zh-bionic-21.0.0s.pet (8 mb)

Plus 2 Chinese language pets for jackalpup 0.0:

Simplified Chinese:
jackalpup64-0.0-zhcn-21.0.0s.pet (2 mb)

Traditional Chinese:
jackalpup64-0.0-zhhk-21.0.0s.pet (2 mb)

To use:
(a) any 1 of the 3 half-Chinese language pets will enable you to display and input Chinese in jackalpup 0.0

(b) the 2 name corresponding Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for jackalpup 0.0

for more information about the fcitx64, scim64 and yong3264 pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

IOwt3ch released Studio 13.37 3.3 on Jul 16, 2020

More information and forum discussions:
viewtopic.php?f=33&t=126

Download:
https://drive.google.com/drive/folders/ ... AwPPM_N7Ah

I have created 6 half-Chinese language pets for Studio 13.37 3.3:

fcitx Chinese input platform:
fcitx64_4.2.9-en-zh-bionic-21.0.0t.pet (17 mb)

scim Chinese input platform:
scim64_1.4.14-en-zh-bionic-21.0.0t.pet (12 mb)

yong Chinese input platform:
yong3264_20201122-en-zh-bionic-21.0.0t.pet (8 mb)

Plus 2 Chinese language pets for Studio 13.37 3.3:

Simplified Chinese:
studio-13.37.33-zhcn-21.0.0t.pet (4 mb)

Traditional Chinese:
studio-13.37.33-zhhk-21.0.0t.pet (4 mb)

To use:
(a) any 1 of the 3 half-Chinese language pets will enable you to display and input Chinese in Studio 13.37 3.3

(b) the 2 name corresponding Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for Studio 13.37 3.3

for more information about the fcitx64, scim64 and yong3264 pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders.

Please see the first posting for download addresses.

Further to the released of LxPupSc 20.06.00T-k64 on Jun 14, 2020, LxPupSc 20.06.01T-k64 (released on Oct 21, 2020); LxPupSc 20.06.02T-k64 (released on Nov 1, 2020) and LxPupSc 20.06.03T-k64 (released on Nov 25, 2020 ) were subsequently released

More information:
http://murga-linux.com/puppy/viewtopic. ... 751#870751
http://www.smokey01.com/peebee/LxPupSc32-20.06.htm

Download: https://sourceforge.net/projects/lxpup/ ... /interims/

I have created 6 half-Chinese language pets for LxPupSc 20.06.01T-k64 to 03T-k64:
fcitx Chinese input platform:
fcitx_4.2.9-en-zh-bionic-20.0.0s.pet (17 mb)

scim Chinese input platform:
scim_1.4.14-en-zh-bionic-20.0.0s.pet (21 mb)

yong Chinese input platform:
yong3264_20201122-en-zh-xenial-20.0.0s.pet (8 mb)

Plus 2 Chinese language pets for LxPupSc 20.06.01T-k64:
Simplified Chinese:
lxpupsc-20.06.01T.k64-zhcn-20.0.0s.pet (2 mb)
lxpupsc-20.06.02T.k64-zhcn-20.0.0s.pet (2 mb)
lxpupsc-20.06.03T.k64-zhcn-20.0.0s.pet (2 mb)

Traditional Chinese:
lxpupsc-20.06.01Tk64-zhhk-20.0.0s.pet (2 mb)
lxpupsc-20.06.02Tk64-zhhk-20.0.0s.pet (2 mb)
lxpupsc-20.06.03Tk64-zhhk-20.0.0s.pet (2 mb)

To use:
(a) any 1 of the 3 half-Chinese language pets will enable you to display and input Chinese in LxPupSc 20.06.01T-k64 to 03T-k64

(b) the 2 name corresponding Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for LxPupSc 20.00.01T-k64 to 03T-k64

for more information about the fcitx, scim and yong pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

BarryK has recently released EasyOS Dunfell-series 0.92 (Oct 16, 2020), 0.93 (Nov 18, 2020) and 0.95 (Oct 24, 2020)

more information, annoucement notes and download addresses:
https://easyos.org/forum/forumdisplay.php?fid=2

I have created 6 half-Chinese language pets each for easydunfell 0.92 to 0.95:
fcitx Chinese input platform:
fcitx64_4.2.9-en-zh-bionic-21.0.0.pet (17 mb)

scim Chinese input platform:
scim64_1.4.18-en-zh-bionic-21.0.0.pet (12 mb)

yong Chinese input platform:
yong3264_20201122-en-zh-bionic-21.0.0.pet (8 mb)

Plus 2 Chinese language pets each for easy dunfell 0.92 to 0.95:
Simplified Chinese:
easydunfell64-0.92-zhcn-21.0.0.pet (4 mb)
easydunfell64-0.93-zhcn-21.0.0.pet (4 mb)
easydunfell64-0.95-zhcn-21.0.0.pet (4 mb)

Traditional Chinese:
easydunfell64-0.92-zhhk-21.0.0.pet (4 mb)
easydunfell64-0.93-zhhk-21.0.0.pet (4 mb)
easydunfell64-0.95-zhhk-21.0.0.pet (4 mb)

To use:
(a) any 1 of the 3 half-Chinese language pets will enable you to display and input Chinese in easy dunfell 0.92 to 0.95

(b) the 2 name corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for easy dunfell 0.92 to 0.95

more information about the fcitx64, scim64 and yong3264 pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

Further to the release of easy os buster 2.3.8, updated versions 2.4.91 to 2.5 were released

more information, annoucement notes and download addresses:
easyos viewtopic.php?f=63&t=1398
easypup https://bkhome.org/news/202011/easypup- ... eased.html

I have created 6 half-Chinese language pets each for easy os buster 4.91 and 2.4.92:
fcitx Chinese input platform:
fcitx64_4.2.9-en-zh-bionic-21.0.0.pet (17 mb)

scim Chinese input platform:
scim64_1.4.18-en-zh-bionic-21.0.0.pet (12 mb)

yong Chinese input platform:
yong3264_20201122-en-zh-bionic-21.0.0.pet (8 mb)

Plus 2 Chinese language pets each for easy buster 2.4.91 to 2.5:
Simplified Chinese:
easyos-2.5-zhcn-21.0.0.pet (3 mb)
easyos-2.4.92-zhcn-21.0.0.pet (3 mb)
easypup-2.4.91-zhcn-21.0.0.pet (3 mb)

Traditional Chinese:
easyos-2.5-zhhk-21.0.0.pet (3 mb)
easyos-2.4.92-zhhk-21.0.0.pet (3 mb)
easypup-2.4.91-zhhk-21.0.0.pet (3 mb)

To use:
(a) any 1 of the 3 half-Chinese language pets will enable you to display and input Chinese in easyos buster 2.4.91 to 2.5

(b) the 2 name corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for easyos buster 2.4.91 to 2.5

more information about the fcitx64 pets, scim64 pets and yong3264 pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

Further to the release of Chinese language pets 13.1.0 for Fatdog64-811 on Nov 1, 2020, I have upgraded them to 21.0.0f

More information about the Fatdog64-811:
viewtopic.php?f=60&t=746

Download Fatdog64-811:
http://distro.ibiblio.org/fatdog/iso/
https://mirror.aarnet.edu.au/pub/fatdog/iso/
http://ftp.cc.uoc.gr/mirrors/linux/fatdog/iso/
http://ftp.nluug.nl/ibiblio/distributions/fatdog/iso/

(a) I have created 3 half-Chinese language pets version 21.0.0f for Fatdog64-811:
fcitx Chinese input platform:
fcitx64_4.2.7-fd64802-en-zh-raring-21.0.0f.txz (15 mb)

scim Chinese input platform:
scim64_1.4.14-fd64802-en-zh-raring-21.0.0f.txz (12 mb)

yong Chinese input platform:
yong_4.2.0-fd64802-en-zh-raring-21.0.0f.txz (5 mb)

(b) I have also created 2 version 21.0.0f Chinese language pets for Fatdog64-811:
Simplified Chinese:
fd64-8.1.1-zhcn-21.0.0f.txz (1 mb)

Traditional Chinese:
fd64-8.1.1-zhhk-21.0.0f.txz (1 mb)

To use:
(c) after install any 1 of the 3 half-Chinese language pets under (a): your Fatdog64 811 (requires the 802 half-Chinese language pets) system can display and input Chinese (desktop menus, sub-menus and icon labels are still English)

(d) after install any 1 of the 3 half-Chinese language pets under (a) and also install 1 of the 2 the version corresponding Chinese language pets under (b), your Fatdog64 811 system can display and input Chinese; plus your desktop menus, sub-menus and icon labels are changed to Simplified Chinese or Traditional Chinese

more information about the fcitx64, scim64 and yong half-Chinese language pets, please see the first postings of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

Further to the release of Chinese language pets version 18.0.51 on Nov 11, 2020 for fossapup64 9.0.5 and 9.5.0, I have upgraded them to version 21.0.0s

fcitx Chinese input platform:
fcitx64_4.2.9-en-zh-bionic-21.0.0s.pet (17 mb)

scim Chinese input platform:
scim64_1.4.14-en-zh-bionic-21.0.0s.pet (12 mb)

yong Chinese input platform:
yong3264_20201122-en-zh-bionic-21.0.0s.pet (8 mb)

plus 2 version 20.0.0s Chinese language pets for fossapup64 9.0.5 and 9.5.0:
Simplified Chinese:
fossapup64-9.0.5-zhcn-21.0.0s.pet (2 mb)
fossapup64-9.5.0-zhcn-21.0.0s.pet (2 mb)

Traditional Chinese:
fossapup64-9.0.5-zhhk-21.0.0s.pet (2 mb)
fossapup64-9.5.0-zhhk-21.0.0s.pet (2 mb)

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

exton recently released PuppEx Focal64 201119 and 201121

More information and forum discussions:
viewtopic.php?f=33&t=1429

Download iso:
https://sourceforge.net/projects/puppex/
http://archive.org/details/Puppy_Linux_Puppex-Focal64

I have created 3 half-Chinese language pets for PuppEx Focal64 201119 and 201121 :

fcitx Chinese input platform:
fcitx64_4.2.9-en-zh-bionic-21.0.0s.pet (19 mb)

scim Chinese input platform:
scim64_1.4.9-en-zh-bionic-21.0.0s.pet (12 mb)

yong Chinese input platform:
yong3264_20201122-en-zh-bionic-21.0.0s.pet (8 mb)

Plus 2 Chinese language pets for PuppEx Focal64 201119 and 201121 :

Simplified Chinese:
pupexfocal64-20.11.19-zhcn-21.0.0s.pet (2 mb)
pupexfocal64-20.11.21-zhcn-21.0.0s.pet (2 mb)

Traditional Chinese:
pupexfocal64-20.11.19-zhhk-21.0.0s.pet (2 mb)
pupexfocal64-20.11.21-zhhk-21.0.0s.pet (2 mb)

To use:
(a) any 1 of the 3 half-Chinese language pets will enable you to display and input Chinese in PuppEx Focal64 201119 and 201121

(b) the 2 name corresponding Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for PuppEx Focal64 201119 and 201121

for more information about the fcitx64, scim64 and yong3264 pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

Further to the release of easy os and easy pup buster 2.5.1, updated versions 2.5.1, 2.5.3 and 2.5.5 were released

more information, annoucement notes and download addresses:
easyos viewtopic.php?f=63&t=1533
easypup https://bkhome.org/linux/easypup-a-blen ... asyos.html

I have created 4 half-Chinese language pets each for easy os 2.5.1, 2.5.3 and 2.5.5 and easy pup buster 2.5.1:
fcitx Chinese input platform:
fcitx64_4.2.9-en-zh-bionic-21.0.0.pet (17 mb)

ibus Chinese input platform:
ibus64_1.5.9-en-zh-bionic-21.0.0.pet (24 mb)

scim Chinese input platform:
scim64_1.4.18-en-zh-bionic-21.0.0.pet (12 mb)

yong Chinese input platform:
yong3264_20201122-en-zh-bionic-21.0.0.pet (8 mb)

Plus 2 Chinese language pets each for easyos 2.5.1, 2.5.3 and 2.5.5 and easypup buster 2.5.1:
Simplified Chinese:
easyos-2.5.5-zhcn-21.0.0.pet (3 mb)
easyos-2.5.3-zhcn-21.0.0.pet (3 mb)
easyos-2.5.1-zhcn-21.0.0.pet (3 mb)
easypup-2.5.1-zhcn-21.0.0.pet (3 mb)

Traditional Chinese:
easyos-2.5.5-zhhk-21.0.0.pet (3 mb)
easyos-2.5.3-zhhk-21.0.0.pet (3 mb)
easyos-2.5.1-zhhk-21.0.0.pet (3 mb)
easypup-2.5.1-zhhk-21.0.0.pet (3 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in easyos 2.5.1, 2.5.3 and 2.5.5 easypup buster 2.5.1

(b) the 2 name corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for easyos 2.5.1, 2.5.3 and 2.5.5 and easypup buster 2.5.1

more information about the fcitx64, ibus64, scim64 and yong3264 pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

radky released a number of busterpup in 2019 and 3 of them are busterpup 8.0, busterpup 8.0 thin and buster32 stripped.

More information and download iso:
https://archive.org/details/Puppy_Linux_BusterPup

I have created 4 half-Chinese language pets for busterpup 8.0, busterpup 8.0 thin and buster32 stripped:
fcitx Chinese input platform:
fcitx_4.2.7-en-zh-bionic-20.0.0.pet (17 mb)

ibus Chinese input platform:
ibus_1.5.7-en-zh-bionic-20.0.0.pet (29 mb)

scim Chinese input platform:
scim_1.4.14-en-zh-bionic-20.0.0.pet (16 mb)

yong Chinese input platform:
yong3264_20201122-en-zh-bionic-20.0.0.pet (8 mb)

Plus 2 Chinese language pets for busterpup 8.0, busterpup 8.0 thin and buster32 stripped:
Simplified Chinese:
busterpup-8.0.0-zhcn-20.0.0.pet (2 mb)
busterpup-8.0.0thin-zhcn-20.0.0.pet (2 mb)
buster-8.0stripped-zhcn-20.0.0.pet (2 mb)

Traditional Chinese:
busterpup-8.0.0-zhhk-20.0.0.pet (2 mb)
busterpup-8.0.0thin-zhhk-20.0.0.pet (2 mb)
buster-8.0stripped-zhhk-20.0.0.pet (2 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in busterpup 8.0, busterpup 8.0 thin and buster32 stripped

(b) the version corresponding Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for busterpup 8.0, busterpup 8.0 thin and buster32 stripped

for more information about the fcitx, ibus, scim and yong3264 pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.