Boot and shutdown process interrupted

franah486 · Post by **franah486** » Mon May 22, 2023 5:15 am

Hi, I have problems running Puppy in some cases I got stuck at "Waiting for partition .." the dots also seem stuck but if I wait long enough (2~5 min) it will work but here's the good or "fun" part If I unplug the power cord this behavior cease immediately same behavior may occur at shutdown when I see "session already save, mounted directly on top layer". PS This happens at times and not very often.

Code: Select all

Pup-SysInfo Hardware Report (Summary), Mon 22 May 2023

Current Time: 02:17:50
System Uptime: 0d 2h 30m
Load Average: 0.68 0.54 0.62
Processes: 142 total, 2 running

▶—— BASE SYSTEM ——◀

PC Manufacturer: Noblex
Product Name: NT1013E

Motherboard Vendor: Intel Corporation
Product Name: Intel powered classmate PC

BIOS Vendor: Phoenix Technologies Ltd.
Version: SPCDV10L.91A.0045.2013.0315.1514
Release Date: 03/15/2013

Intel(R) Atom(TM) CPU N2600 @ 1.60GHz
Min/Max Speed: 600/1600 MHz
Current Speed of Core 0:1600 MHz, 1:600 MHz, 2:600 MHz, 3:1600 MHz
Core Count: 2
Thread Count: 4

Frequency governor   : ondemand
Freq. scaling driver : acpi-cpufreq

itlb_multihit:Not affected
l1tf:Not affected
mds:Not affected
meltdown:Not affected
spec_store_bypass:Not affected
spectre_v1:Not affected
spectre_v2:Not affected
srbds:Not affected
tsx_async_abort:Not affected

Core 0 (coretemp) : +51.0 C (high = +NA.0 C, crit = +100.0 C)
Core 1 (coretemp) : +55.0 C (high = +NA.0 C, crit = +100.0 C)

Personal Storage Folder:
 Name: /pups/slacko64/slacko64save
 Total Size: 1.8G 
 Free Space: 451M 
 Location: partition sdb2

Memory Allocation:
 Total RAM: 1974 MB
 Used RAM: 1297 MB
 Free RAM: 677 MB
 Buffers: 108 MB
 Cached: 578 MB
 Total Swap: 1928 MB
 Free Swap: 1928 MB

 Actual Used RAM: 611 MB  	Used - (buffers + cached)
 Actual Free RAM: 1363 MB	Free + (buffers + cached)

Linux Kernel: 4.19.164 (x86_64)
Kernel Version: #1 SMP Sat Jan 2 15:22:11 AEST 2021
Build GCC: 5.5.0

Kernel Command Line:
BOOT_IMAGE=/pups/slacko64/vmlinuz net.ifnames=0 pmedia=usbhd pdrv=lin96dae1f7 psubdir=/pups/slacko64 pfix=nocopy TZ=XXX-3

Distro: Slacko64 Puppy 7.0
Window Manager: JWM v2.3.6
Desktop Start: xwin jwm

Development:
 Bash: 4.3.48
 Geany: 1.35
 Gtkdialog: 0.8.4
 Perl: 5.22.2
 Yad: 0.42.1 (GTK+ 2.24.31)
 --
 busybox: 1.31.0
 dhcpcd: 6.8.2
 Glibc: 2.23
 OpenSSL: 1.0.2u  20 Dec 2019, built on: reproducible build, date unspecified
 wpa_supplicant: 2.9

Username: root
Language: en_US
Keyboard: latam
Timezone: America/Argentina/Buenos_Aires

Firewall: On (ip_tables active)
Network Interface:  wlan0
Wireless Network: vanet-fibra-9251
Bit Rate=65 Mb/s Tx-Power=20 dBm 
Link Quality=62/70 Signal=-48 dBm 
Wireless strength: 88%
Session Data: Received 49.1 MB, Sent 4.1 MB
Monthly Data: Received 49 MB, Sent 4 MB

Hostname: puppypc14208
Network IP Address: 192.168.2.12
Domain Name Server (DNS): 192.168.2.1
Hardware Address (MAC): 6C:71:D9:66:42:14

Boot Partition: sdb2 (Size 1.8G, Free 451M)
Boot File System: f2fs
Boot Media: usbhd

PUPMODE=12
PUPSFS=sdb2,f2fs,/pups/slacko64/puppy_slacko64_7.0.sfs
PUPSAVE=sdb2,f2fs,/pups/slacko64/slacko64save

▶—— BATTERY (BAT0) ——◀

BAT0 is not detected.

▶—— DISPLAY ——◀

Display Specifications:
• Monitor VertRefresh: 60.00 times/s
• Screen Dimensions: 1024x600 pixels (270x158 millimeters)
• Screen Depth: 24 bits (planes)

Xorg Startup Log (/var/log/Xorg.0.log):
• Xorg Driver in use: modesetting
• Loaded Modules: evdev fb glamoregl glx synaptics
• X.Org version: 1.18.3

OpenGL 2D/3D Rendering:
• Direct Rendering: Yes
• Vendor: VMware, Inc.
• Renderer: Gallium 0.4 on llvmpipe (LLVM 3.8, 128 bits)
• Version: 3.0 Mesa 11.2.2

VGA controller [0300]: Intel Corporation Atom Processor D2xxx/N2xxx Integrated Graphics Controller [8086:0be1] (rev 0b)
• Kernel Driver: gma500
• Memory Used by Driver: 0 KB
• Description: N/A
• Video RAM: 1974M 

▶—— MULTIMEDIA ——◀

Audio device [0403]: Intel Corporation NM10/ICH7 Family High Definition Audio Controller [8086:27d8] (rev 02)
• Kernel Driver: snd_hda_intel
• Memory Used: 28.00 KB
• Path: /lib/modules/4.19.164/kernel/sound/pci/hda/snd-hda-intel.ko
• Description: Intel HDA driver

▶—— NETWORK ——◀

Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL810xE PCI Express Fast Ethernet controller [10ec:8136] (rev 05)
• Kernel Driver: r8169
• Memory Used: 76.00 KB
• Path: /lib/modules/4.19.164/kernel/drivers/net/ethernet/realtek/r8169.ko
• Description: RealTek RTL-8169 Gigabit Ethernet driver

Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter [10ec:8176] (rev 01)
• Kernel Driver: rtl8192ce
• Memory Used: 56.00 KB
• Path: /lib/modules/4.19.164/kernel/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/rtl8192ce.ko
• Description: Realtek 8192C/8188C 802.11n PCI wireless

▶—— INPUT DEVICES ——◀

"AT Translated Set 2 keyboard"
"cmpc_accel_v4"
"cmpc_keys"
"HDA Digital PCBeep"
"HDA Intel HDMI/DP,pcm=3"
"HDA Intel Headphone"
"HDA Intel Mic"
"Lid Switch"
"PC Speaker"
"Power Button"
"Sleep Button"
"SynPS/2 Synaptics TouchPad"
"USB 2.0 Camera: USB 2.0 Camera"
"Video Bus"

▶—— PCI DEVICES ——◀

Host bridge
• Intel Corporation Atom Processor D2xxx/N2xxx DRAM Controller
• VendorID=8086  DeviceID=0bf1  Rev=04

VGA compatible controller
• Intel Corporation Atom Processor D2xxx/N2xxx Integrated Graphics Controller
• VendorID=8086  DeviceID=0be1  Rev=0b
• Kernel Driver=gma500
• Kernel Module=gma500_gfx

Audio device
• Intel Corporation NM10/ICH7 Family High Definition Audio Controller
• VendorID=8086  DeviceID=27d8  Rev=02
• Kernel Driver=snd_hda_intel
• Kernel Module=snd_hda_intel

PCI bridge
• Intel Corporation NM10/ICH7 Family PCI Express Port 1
• VendorID=8086  DeviceID=27d0  Rev=02
• Kernel Driver=pcieport

PCI bridge
• Intel Corporation NM10/ICH7 Family PCI Express Port 2
• VendorID=8086  DeviceID=27d2  Rev=02
• Kernel Driver=pcieport

PCI bridge
• Intel Corporation NM10/ICH7 Family PCI Express Port 3
• VendorID=8086  DeviceID=27d4  Rev=02
• Kernel Driver=pcieport

PCI bridge
• Intel Corporation NM10/ICH7 Family PCI Express Port 4
• VendorID=8086  DeviceID=27d6  Rev=02
• Kernel Driver=pcieport

USB controller
• Intel Corporation NM10/ICH7 Family USB UHCI Controller #1
• VendorID=8086  DeviceID=27c8  Rev=02
• Kernel Driver=uhci_hcd

USB controller
• Intel Corporation NM10/ICH7 Family USB UHCI Controller #2
• VendorID=8086  DeviceID=27c9  Rev=02
• Kernel Driver=uhci_hcd

USB controller
• Intel Corporation NM10/ICH7 Family USB UHCI Controller #3
• VendorID=8086  DeviceID=27ca  Rev=02
• Kernel Driver=uhci_hcd

USB controller
• Intel Corporation NM10/ICH7 Family USB UHCI Controller #4
• VendorID=8086  DeviceID=27cb  Rev=02
• Kernel Driver=uhci_hcd

USB controller
• Intel Corporation NM10/ICH7 Family USB2 EHCI Controller
• VendorID=8086  DeviceID=27cc  Rev=02
• Kernel Driver=ehci-pci

PCI bridge
• Intel Corporation 82801 Mobile PCI Bridge
• VendorID=8086  DeviceID=2448  Rev=e2

ISA bridge
• Intel Corporation NM10 Family LPC Controller
• VendorID=8086  DeviceID=27bc  Rev=02
• Kernel Driver=lpc_ich
• Kernel Module=lpc_ich

SATA controller
• Intel Corporation NM10/ICH7 Family SATA Controller
• VendorID=AHCI mode
• VendorID=8086  DeviceID=27c1  Rev=02
• Kernel Driver=ahci

SMBus
• Intel Corporation NM10/ICH7 Family SMBus Controller
• VendorID=8086  DeviceID=27da  Rev=02
• Kernel Driver=i801_smbus
• Kernel Module=i2c_i801

Ethernet controller
• Realtek Semiconductor Co., Ltd. RTL810xE PCI Express Fast Ethernet controller
• VendorID=10ec  DeviceID=8136  Rev=05
• Kernel Driver=r8169
• Kernel Module=r8169

Network controller
• Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter
• VendorID=10ec  DeviceID=8176  Rev=01
• Kernel Driver=rtl8192ce
• Kernel Module=rtl8192ce

▶—— PRINTERS ——◀

DefaultPrinter CUPS-PDF

▶—— SCSI DEVICES ——◀

ATA TOSHIBA MK1665GS Rev: 3A 
Generic- Multi-Card Rev: 1.00

▶—— SCSI PARTITIONS ——◀

ATA TOSHIBA MK1665GS – sda: 160GB
Generic- Multi-Card – sdb: 1978MB
Unknown (unknown)– zram0: 2022MB

sda1	 vfat	 512M  [ATA TOSHIBA MK1665GS]
sda2	 ext4	 148.5G  [ATA TOSHIBA MK1665GS]
sdb1	 vfat	 128M  [Generic- Multi-Card]
sdb2	 f2fs	 1.7G  [Generic- Multi-Card]

▶—— SCSI PARTITIONS MOUNTED ——◀

Filesystem      Size  Used Avail Use% Mounted on
/dev/sdb2       1.8G  1.3G  451M  75% /initrd/mnt/dev_save

▶—— USB DEVICES ——◀

VendorID=1d6b ProductID=0002 Rev=04.19
Manufacturer=Linux 4.19.164 ehci_hcd
Product=EHCI Host Controller
Driver=hub

VendorID=187f ProductID=0600 Rev=00.08
Manufacturer=MDTV Receiver
Product=MDTV Receiver
Driver=smsusb

VendorID=04f2 ProductID=b3c0 Rev=91.02
Manufacturer=Chicony Electronics Co.,Ltd.
Product=USB 2.0 Camera
Driver=uvcvideo

VendorID=0bda ProductID=0138 Rev=38.82
Manufacturer=Generic
Product=USB2.0-CRW
Driver=ums-realtek

VendorID=1d6b ProductID=0001 Rev=04.19
Manufacturer=Linux 4.19.164 uhci_hcd
Product=UHCI Host Controller
Driver=hub

VendorID=1d6b ProductID=0001 Rev=04.19
Manufacturer=Linux 4.19.164 uhci_hcd
Product=UHCI Host Controller
Driver=hub

VendorID=1d6b ProductID=0001 Rev=04.19
Manufacturer=Linux 4.19.164 uhci_hcd
Product=UHCI Host Controller
Driver=hub

VendorID=1d6b ProductID=0001 Rev=04.19
Manufacturer=Linux 4.19.164 uhci_hcd
Product=UHCI Host Controller
Driver=hub

--

Bus 001 Device 004: ID 0bda:0138 Realtek Semiconductor Corp. RTS5138 Card Reader Controller
Bus 001 Device 003: ID 04f2:b3c0 Chicony Electronics Co., Ltd 
Bus 001 Device 002: ID 187f:0600 Siano Mobile Silicon 
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

=== END OF SUMMARY REPORT ===

This report is also available in
/tmp/root/PSI-HW-SUMMARY-230522.

Post by **bigpup** » Mon May 22, 2023 5:43 am

This is looking like a computer with hardware problems.
When it works if you pull the power cord and just run on battery.
Could be a bad power cord or one going bad.
Connection on side of laptop clean, nothing in it, no corrosion, etc...........
Same for the power cord end that plugs into computer.

franah486 · Post by **franah486** » Mon May 22, 2023 7:42 am

Hi @bigpup hru I've aware of keep clean these stuffs because of short-circuits and moisture are undesirable in these devices and here where I live there's high humidity.

So, I am suspicious that is not the case. I was thinking of a kernel/firmware thing. ¿Any suggest?

PS I don't remember if this also happened with the battery alone. But there's a hint I once did the opposite, that day the pc did not want to shutdown so I've plugged the power cord and it did immediately (same behavior) (same instance)

Post by **bigpup** » Mon May 22, 2023 3:34 pm

Well, try it only using the battery.

Could try resetting the bios settings to default.

If Slacko64 7.0 is the only Puppy version you have used.
It never got fully bug fixed.

Try a different Puppy version.

franah486 · Post by **franah486** » Sun May 28, 2023 7:28 pm

Hello again, after a short test this behaviour seems to go off by updating the kernel, ie (updated through change_kernels from 4.19.164 to 5.4.86)

Post by **bigpup** » Sun May 28, 2023 8:06 pm

Puppy does not need to change kernel unless you have a a piece of specific hardware that may need the newer kernel.

Unless you tell us specifically how you used the change_kernels program.
We have no idea if you did it correctly.

Well, kernels do have bugs and are not 100% perfect.

Again, if using Slacko64 7.0
It never got fully bug fixed.

franah486 · Post by **franah486** » Mon May 29, 2023 5:03 pm

Hello bigpup Oh, I didn't know that... Srry. To be honest I don't know anything about Linux I've followed this thread: viewtopic.php?p=1497#p1497 thus I have downloaded the bz2 huge_kernel accordingly to my system and drag the file to the window after a couple of minutes was prompted to reset my system this task was very easy to accomplish even for me

Puppy Linux Discussion Forum

Boot and shutdown process interrupted

Boot and shutdown process interrupted

Re: Boot and shutdown process interrupted

Re: Boot and shutdown process interrupted

Re: Boot and shutdown process interrupted

Re: Boot and shutdown process interrupted

Re: Boot and shutdown process interrupted

Re: Boot and shutdown process interrupted