Zoom sfs not working for me.

Moderator: BarryK

Post Reply
TerryH
Posts: 638
Joined: Mon Jun 15, 2020 2:08 am
Has thanked: 159 times
Been thanked: 161 times

Zoom sfs not working for me.

Post by TerryH »

Running EasyOS Dunfell 4.3.4 I downloaded the zoom sfs using sfsget, followed instructions to install and rebooted. On reboot it did not run. This is the terminal output:

Code: Select all

# zoom
ZoomLauncher started.
Zoom path is: /opt/zoom
cmd line: 
Start subprocess: /opt/zoom/zoom sucessfully,  process pid: 9098 
Can't load/home/zoom/.config/zoomus.conf
Failed to create secure directory (/run/pulse): Permission denied
No PulseAudio daemon running, or not running as session daemon.
                             Class      App      Lib Possible Culprit Flags
                resip::Connection      648      648 
                      resip::Data       36       36 
                 resip::DnsResult     1080     1080 
                   resip::Headers        1        1 
          resip::MsgHeaderScanner       40       40 
                resip::SipMessage     5208     5208 
         resip::TransportSelector      864      864 
                     resip::Tuple      128      128 
              resip::UdpTransport     1144     1144 
          resip::GenericIPAddress       28       28 

zoom started.
[0914/221120.998346:FATAL:setuid_sandbox_host.cc(158)] The SUID sandbox helper binary was found, but is not configured correctly. Rather than run without sandboxing I'm aborting now. You need to make sure that /opt/zoom/cef/chrome-sandbox is owned by root and has mode 4755.
zoom was exited due to a handled signal: 5 
ZoomLauncher exit.
# Failed to create secure directory (/run/pulse): Permission denied
No PulseAudio daemon running, or not running as session daemon.
                             Class      App      Lib Possible Culprit Flags
                resip::Connection      648      648 
                      resip::Data       36       36 
                 resip::DnsResult     1080     1080 
                   resip::Headers        1        1 
          resip::MsgHeaderScanner       40       40 
                resip::SipMessage     5208     5208 
         resip::TransportSelector      864      864 
                     resip::Tuple      128      128 
              resip::UdpTransport     1144     1144 
          resip::GenericIPAddress       28       28 

zoom started.

New Laptop - ASUS ZenBook Ryzen 7 5800H Vega 7 iGPU / 16 GB RAM

User avatar
BarryK
Posts: 2705
Joined: Tue Dec 24, 2019 1:04 pm
Has thanked: 132 times
Been thanked: 739 times

Re: Zoom sfs not working for me.

Post by BarryK »

Thanks for testing.
I notice at the bottom of your log, it says "zoom started" -- what happened after that?

Curious about one thing, try this:

Code: Select all

# zoom.bin --no-sandbox

...that should run it as the root user.

Maybe
Posts: 120
Joined: Fri May 28, 2021 7:07 pm
Has thanked: 93 times
Been thanked: 19 times

Re: Zoom sfs not working for me.

Post by Maybe »

Hello!

I installed zoom.sfs from sfs app. As a result, I had the same problem with launching Zoom from the main menu, like the @TerryH.

Dear @BarryK, I took your advice and tried in the terminal:

Code: Select all

# zoom.bin --no-sandbox

As a result, Zoom started, but unfortunately an empty window.

Code: Select all

# zoom.bin --no-sandbox
ZoomLauncher started.
Zoom path is: /opt/zoom
cmd line: --no-sandbox
Start subprocess: /opt/zoom/zoom sucessfully,  process pid: 18462 
Can't load/root/.config/zoomus.conf
                             Class      App      Lib Possible Culprit Flags
                resip::Connection      648      648 
                      resip::Data       36       36 
                 resip::DnsResult     1080     1080 
                   resip::Headers        1        1 
          resip::MsgHeaderScanner       40       40 
                resip::SipMessage     5208     5208 
         resip::TransportSelector      864      864 
                     resip::Tuple      128      128 
              resip::UdpTransport     1144     1144 
          resip::GenericIPAddress       28       28 

zoom started.
                                                         Class       AppClass         Lib   Possible Culprit Flags App
            Lib    Possible Culprit Flags  
         resip:: Connection          648        648   
      resip:: Connection          648         648   
                  resip:: Data         36         36    
          resip:: Data          36         36    
     resip:: DnsResult       1080       1080   
                resip:: DnsResult        1080        1080    
 resip:: Headers          1          1   
                      resip::resip::MsgHeaderScannerHeaders        40       1        40       1  

                     resip::  MsgHeaderScanner          40resip:: SipMessage      40      5208
      5208   
                   resip:: TransportSelector        864resip:: SipMessage     864      5208
       5208    
                    resip:: TransportSelector         864 resip:: Tuple     864       128
       128   
                            resip:: UdpTransport       1144  resip::    1144Tuple  
     128         128   
         resip:: GenericIPAddress         28         28   
 
  resip::UdpTransport     1144     1144 
          resip::GenericIPAddress       28       28 

zoom started.
zoom started.
Client: Breakpad is using Single Client Mode! client fd = -1
QStandardPaths: XDG_RUNTIME_DIR not set, defaulting to '/tmp/runtime-root'
                             Class      App      Lib Possible Culprit Flags
                resip::Connection      648      648 
                      resip::Data       36       36 
                 resip::DnsResult     1080     1080 
                   resip::Headers        1        1 
          resip::MsgHeaderScanner       40       40 
                resip::SipMessage     5208     5208 
         resip::TransportSelector      864      864 
                     resip::Tuple      128      128 
              resip::UdpTransport     1144     1144 
          resip::GenericIPAddress       28       28 

zoom started.
[CZPClientLogMgr::LogClientEnvironment] [MacAddr: 00:24:D7:04:E4:00][client: Linux][OS:  Easy Dunfell64 x64][Hardware: CPU Core:2 Frenquency:2 G Memory size:3739MB CPU Brand:Intel(R) Core(TM) i5 CPU       M 520  @ 2.40GHz GPU Brand:][Req ID: ]
Linux Client Version is 5.11.10 (4400)
QSG_RENDER_LOOP is 
XDG_CURRENT_DESKTOP = ;   GDMSESSION = ;   XDG_SESSION_TYPE = 
Graphics Card Info:: 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02)
Zoom package arch is 64bit, runing OS arch is x86_64
AppIconMgr::systemDesktopName log Desktop Name:  
qt.scenegraph.general: threaded render loop
qt.scenegraph.general: Using sg animation driver
qt.scenegraph.general: Animation Driver: using vsync: 16.67 ms
qt.scenegraph.general: Using sg animation driver
qt.scenegraph.general: Animation Driver: using vsync: 16.67 ms
qt.scenegraph.general: texture atlas dimensions: 1024x512
qt.scenegraph.general: R/G/B/A Buffers:   8 8 8 0
qt.scenegraph.general: Depth Buffer:      24
qt.scenegraph.general: Stencil Buffer:    8
qt.scenegraph.general: Samples:           -1
qt.scenegraph.general: GL_VENDOR:         Intel Open Source Technology Center
qt.scenegraph.general: GL_RENDERER:       Mesa DRI Intel(R) HD Graphics (ILK)
qt.scenegraph.general: GL_VERSION:        2.1 Mesa 21.3.7
qt.scenegraph.general: GL_EXTENSIONS:     GL_3DFX_texture_compression_FXT1 GL_AMD_seamless_cubemap_per_texture GL_AMD_shader_trinary_minmax GL_ANGLE_texture_compression_dxt3 GL_ANGLE_texture_compression_dxt5 GL_APPLE_object_purgeable GL_APPLE_packed_pixels GL_ARB_ES2_compatibility GL_ARB_arrays_of_arrays GL_ARB_buffer_storage GL_ARB_clear_buffer_object GL_ARB_clear_texture GL_ARB_clip_control GL_ARB_color_buffer_float GL_ARB_compressed_texture_pixel_storage GL_ARB_copy_buffer GL_ARB_copy_image GL_ARB_debug_output GL_ARB_depth_buffer_float GL_ARB_depth_clamp GL_ARB_depth_texture GL_ARB_draw_buffers GL_ARB_draw_elements_base_vertex GL_ARB_draw_instanced GL_ARB_explicit_attrib_location GL_ARB_explicit_uniform_location GL_ARB_fragment_coord_conventions GL_ARB_fragment_program GL_ARB_fragment_program_shadow GL_ARB_fragment_shader GL_ARB_framebuffer_object GL_ARB_framebuffer_sRGB GL_ARB_get_program_binary GL_ARB_get_texture_sub_image GL_ARB_half_float_pixel GL_ARB_half_float_vertex GL_ARB_instanced_arrays GL_ARB_internalformat_query GL_ARB_internalformat_query2 GL_ARB_invalidate_subdata GL_ARB_map_buffer_alignment GL_ARB_map_buffer_range GL_ARB_multi_bind GL_ARB_multisample GL_ARB_multitexture GL_ARB_occlusion_query GL_ARB_occlusion_query2 GL_ARB_parallel_shader_compile GL_ARB_pixel_buffer_object GL_ARB_point_parameters GL_ARB_point_sprite GL_ARB_polygon_offset_clamp GL_ARB_program_interface_query GL_ARB_provoking_vertex GL_ARB_robustness GL_ARB_sampler_objects GL_ARB_seamless_cube_map GL_ARB_seamless_cubemap_per_texture GL_ARB_separate_shader_objects GL_ARB_shader_bit_encoding GL_ARB_shader_draw_parameters GL_ARB_shader_group_vote GL_ARB_shader_objects GL_ARB_shader_texture_lod GL_ARB_shading_language_100 GL_ARB_shading_language_include GL_ARB_shading_language_packing GL_ARB_shadow GL_ARB_sync GL_ARB_texture_barrier GL_ARB_texture_border_clamp GL_ARB_texture_compression GL_ARB_texture_compression_rgtc GL_ARB_texture_cube_map GL_ARB_texture_env_add GL_ARB_texture_env_combine GL_ARB_texture_env_crossbar GL_ARB_texture_env_dot3 GL_ARB_texture_filter_anisotropic GL_ARB_texture_float GL_ARB_texture_mirror_clamp_to_edge GL_ARB_texture_mirrored_repeat GL_ARB_texture_non_power_of_two GL_ARB_texture_query_lod GL_ARB_texture_rectangle GL_ARB_texture_rg GL_ARB_texture_storage GL_ARB_texture_swizzle GL_ARB_transpose_matrix GL_ARB_vertex_array_bgra GL_ARB_vertex_array_object GL_ARB_vertex_attrib_binding GL_ARB_vertex_buffer_object GL_ARB_vertex_program GL_ARB_vertex_shader GL_ARB_vertex_type_10f_11f_11f_rev GL_ARB_vertex_type_2_10_10_10_rev GL_ARB_window_pos GL_ATI_blend_equation_separate GL_ATI_draw_buffers GL_ATI_separate_stencil GL_ATI_texture_env_combine3 GL_ATI_texture_float GL_EXT_EGL_image_storage GL_EXT_EGL_sync GL_EXT_abgr GL_EXT_bgra GL_EXT_blend_color GL_EXT_blend_equation_separate GL_EXT_blend_func_separate GL_EXT_blend_minmax GL_EXT_blend_subtract GL_EXT_compiled_vertex_array GL_EXT_copy_texture GL_EXT_demote_to_helper_invocation GL_EXT_direct_state_access GL_EXT_draw_buffers2 GL_EXT_draw_instanced GL_EXT_draw_range_elements GL_EXT_fog_coord GL_EXT_framebuffer_blit GL_EXT_framebuffer_object GL_EXT_framebuffer_sRGB GL_EXT_gpu_program_parameters GL_EXT_multi_draw_arrays GL_EXT_packed_depth_stencil GL_EXT_packed_float GL_EXT_packed_pixels GL_EXT_pixel_buffer_object GL_EXT_point_parameters GL_EXT_polygon_offset_clamp GL_EXT_provoking_vertex GL_EXT_rescale_normal GL_EXT_secondary_color GL_EXT_separate_specular_color GL_EXT_shader_framebuffer_fetch_non_coherent GL_EXT_shadow_funcs GL_EXT_stencil_two_side GL_EXT_stencil_wrap GL_EXT_subtexture GL_EXT_texture GL_EXT_texture3D GL_EXT_texture_array GL_EXT_texture_compression_dxt1 GL_EXT_texture_compression_rgtc GL_EXT_texture_compression_s3tc GL_EXT_texture_cube_map GL_EXT_texture_edge_clamp GL_EXT_texture_env_add GL_EXT_texture_env_combine GL_EXT_texture_env_dot3 GL_EXT_texture_filter_anisotropic GL_EXT_texture_lod_bias GL_EXT_texture_object GL_EXT_texture_rectangle GL_EXT_texture_sRGB GL_EXT_texture_sRGB_R8 GL_EXT_texture_sRGB_decode GL_EXT_texture_shared_exponent GL_EXT_texture_snorm GL_EXT_texture_swizzle GL_EXT_timer_query GL_EXT_vertex_array GL_EXT_vertex_array_bgra GL_IBM_multimode_draw_arrays GL_IBM_rasterpos_clip GL_IBM_texture_mirrored_repeat GL_INGR_blend_func_separate GL_KHR_blend_equation_advanced GL_KHR_context_flush_control GL_KHR_debug GL_KHR_no_error GL_KHR_parallel_shader_compile GL_KHR_robustness GL_MESA_pack_invert GL_MESA_texture_signed_rgba GL_MESA_window_pos GL_NV_blend_square GL_NV_conditional_render GL_NV_depth_clamp GL_NV_fog_distance GL_NV_half_float GL_NV_light_max_exponent GL_NV_packed_depth_stencil GL_NV_primitive_restart GL_NV_texgen_reflection GL_NV_texture_barrier GL_NV_texture_env_combine4 GL_NV_texture_rectangle GL_OES_EGL_image GL_OES_read_format GL_S3_s3tc GL_SGIS_generate_mipmap GL_SGIS_texture_border_clamp GL_SGIS_texture_edge_clamp GL_SGIS_texture_lod GL_SUN_multi_draw_arrays
qt.scenegraph.general: Max Texture Size: 8192
qt.scenegraph.general: Debug context:    false
Error: Send error, 22 Invalid argument
Error: Send error, 22 Invalid argument
Error: Send error, 22 Invalid argument

Probably something with the alpha channel in the GUI. Here is how I tried to solve this problem: https://forum.puppylinux.com/viewtopic.php?t=6520

Dear @BarryK, thank you so much for trying to make EasyOS so necessary and so useful for different people!

From Dmitry (Russia)

User avatar
BarryK
Posts: 2705
Joined: Tue Dec 24, 2019 1:04 pm
Has thanked: 132 times
Been thanked: 739 times

Re: Zoom sfs not working for me.

Post by BarryK »

I went through the exercise, with new Easy on a usb-stick, clicked "sfs" to download and install Zoom:

"New webcam works great with Zoom"
https://bkhome.org/news/202209/new-webc ... -zoom.html

TerryH,
I am puzzled by the error that you reported:

Code: Select all

zoom started.
[0914/221120.998346:FATAL:setuid_sandbox_host.cc(158)] The SUID sandbox helper binary was found, but is not configured correctly. Rather than run without sandboxing I'm aborting now. You need to make sure that /opt/zoom/cef/chrome-sandbox is owned by root and has mode 4755.
zoom was exited due to a handled signal: 5 
ZoomLauncher exit.

In the SFS, /opt/zoom/cef/chrome-sandbox is 0775, which is OK for me.
I checked mikewalsh's portable-Zoom, chrome-sandbox also 0775, but then he runs Zoom as the root user, with "--no-sandbox".

Actually, Mike might be the guy to ask about this, he has done a lot of work finding out things about Zoom. @mikewalsh

Yes, I also get those same error messages about pulseaudio, but audio still works.
Actually, pulseaudio is setup to work with non-root apps, it is just that Zoom is checking the wrong things -- there is no actual daemon visible to Zoom, just a pulseaudio daemon socket.

User avatar
BarryK
Posts: 2705
Joined: Tue Dec 24, 2019 1:04 pm
Has thanked: 132 times
Been thanked: 739 times

Re: Zoom sfs not working for me.

Post by BarryK »

I found out out to determine the FPS and resolution of the video recorded by the webcam:

https://superuser.com/questions/595177/ ... nder-linux

...by using 'ffprobe'.

And, found the video was only 640x360 at 25 FPS.

I went back into Zoom, and discovered that there is "HD" checkbox.
Yes! now get 1280x720 at 25 FPS.

So, it is really a 720p webcam, not a 1440p!
720p is ok for vlogging and online meetings.

User avatar
BarryK
Posts: 2705
Joined: Tue Dec 24, 2019 1:04 pm
Has thanked: 132 times
Been thanked: 739 times

Re: Zoom sfs not working for me.

Post by BarryK »

TerryH and Maybe,
Try this, go to /opt/zoom/cef/ and right-click on 'chrome-sandbox', choose Properties and tick the "SUID" checkbox.

...that is very interesting. I just now did that, and now zoom starts without any error messages!

TerryH
Posts: 638
Joined: Mon Jun 15, 2020 2:08 am
Has thanked: 159 times
Been thanked: 161 times

Re: Zoom sfs not working for me.

Post by TerryH »

BarryK wrote: Thu Sep 15, 2022 3:05 pm

TerryH and Maybe,
Try this, go to /opt/zoom/cef/ and right-click on 'chrome-sandbox', choose Properties and tick the "SUID" checkbox.

...that is very interesting. I just now did that, and now zoom starts without any error messages!

Zoom working following doing this change. I have only checked using the test function in the setup for zoom, video, sound and Microphone are functioning.

This is excellent, just helping to make EasyOS more complete. Thank you.

New Laptop - ASUS ZenBook Ryzen 7 5800H Vega 7 iGPU / 16 GB RAM

User avatar
BarryK
Posts: 2705
Joined: Tue Dec 24, 2019 1:04 pm
Has thanked: 132 times
Been thanked: 739 times

Re: Zoom sfs not working for me.

Post by BarryK »

That's great, I have fixed the SFS, and appended a message to the blog post:

https://bkhome.org/news/202209/new-webc ... -zoom.html

Zoom defaults to saving a recording at /home/zoom
You can change to /files/media/video, and it will be remembered, but I will see if can make that the default. Zoom uses Qt5, and I think there is a config file that can set the default open/save path.

Post Reply

Return to “EasyOS”