Fossapup64 9.5

[666philb]

Fossapup64 9.5 built with puppy .pets & ubuntu focal-fossa packages.

Kernel 5.4.53
Modular build means you can swap out the kernel, applications & firmware in seconds
Want a minimal bare bones puppy? Easy just remove a single file and reboot.
Joe's Window Manager (JWM).
Rox-Filer.
Hexchat.
Palemoon Browser.
MPV, Deadbeef & Gogglesmm (good for large music collections) media players.
Claws Email.
Quickpet.
Osmo.
Abiword.
Samba.
Lots of in house puppy-specific applications such as Pburn, PuppyPhone, Find'n'run, Take A Gif, Uextract, Packit, Dunst-config, Picom-gtk, Transtray, Janky Bluetooth, Change_kernels, JWMdesk, YASSM, Redshift, SimpleGTKradio.

Thanks to all developers, contributors & testers !!!! this includes barry k the original developer of puppy, 01micko the current maintainer of puppy, everyone at woofCE, everyone who participated in the fossapup thread giving feedback and finding bugs, everyone who gave feedback on irc #puppylinux chat,
and all other contributers to puppylnux (too many to name) without which fossapup64 wouldn't be possible.

approx minimum System Requirements: 2007 era 64bit core2duo cpu & 2gb ram

Download here http://distro.ibiblio.org/puppylinux/puppy-fossa/

A 32bit eoan-focal hybrid iso by peebee is also available here https://puppylinux.rockedge.org/viewtop ... f=40&t=405

Bespoke wallpapers by nilsonmorales

fossadusk.jpg (72.33 KiB) Viewed 39657 times

fossasun.jpg (73.19 KiB) Viewed 39657 times

-------------------------------------------------------------------------------
This differs from usual pups by being more modular, sort of a two pups in one. Rather than just the main puppy.sfs and zdrv.sfs (kernel) there's also the puppys fdrv & adrv utility. So say for instance you just want a bare bones system, you can remove the adrv and get a small 180mb puppy. it can go even smaller if you use tahrpups firmware in the fdrv to something nearing 150mb. You could even compile a new smaller kernel for the zdrv and go even smaller.
--------------------------------------------------------------------------------
what the different drvs.sfs give you: .....

puppy_fossapup64_9.5.sfs 97mb
a basic system that boots to desktop. no dri drivers, no apps apart from dillo, urxvt & leafpad

adrv_fossapup_9.5.sfs 229mb
this will give you a regular puppy, abiword, mtpaint palemoon etc

fdrv_fossapup64_9.5.sfs 40mb
this is the firmware separated from the kernel and is easy to edit and change

zdrv_fossapup64_9.5.sfs 27mb
this is the kernel and can easily be changed with change_kernels

note that the puppy.sfs requires a zdrv.sfs & fdrv.sfs, the adrv requires the puppy.sfs,zdrv.sfs & fdrv.sfs.

A video showcasing some of what puppy can do can be seen here

Download here http://distro.ibiblio.org/puppylinux/puppy-fossa/

[666philb]

Current issues
not able to set mouse speed with pupx or input wizard. can be set manually in xorg.conf

[darry19662018]

Thanks Phil,

Will play and try out.

P.s. Tried on HP DV6000 All working well, connected, sound video, all working well.

Deleted A sfs and wow what a trimmed down Pup added what I needed - no problems thus far on a machine with 1 gig ram.

[TiredPup]

I have installed this release to my Dell Optiplex 760 USFF with 3.0GHz Intel Core 2 Duo (E8400), 4Gb RAM to HDD. I included the ADRV in this setup.

The flashing window issue that I experienced in the previous releases is present in RC1. I noticed that the picom app is missing from the menu so I edited the file in /root/.config/picom/ and that has worked.

In the previous release when I installed inxi 3.0 from Ubuntu repos inxi would complain that python deps were not installed. They are installed as part of the original build. Re installing python from package manager would "fix" this problem. However, in RC1 the program complains

Can't locate Data/Dumper.pm in @INC (you may need to install the Data::Dumper module) (@INC contains: /etc/perl /usr/local/lib/x86_64-linux-gnu/perl/5.30.0 /usr/local/share/perl/5.30.0 /usr/lib/x86_64-linux-gnu/perl5/5.30 /usr/share/perl5 /usr/lib/x86_64-linux-gnu/perl/5.30 /usr/share/perl/5.30 /usr/local/lib/site_perl /usr/lib/x86_64-linux-gnu/perl-base) at /usr/bin/inxi line 23.
BEGIN failed--compilation aborted at /usr/bin/inxi line 23.

The package manager broke after initial usage. It will not start from menu. I attempted to start it from terminal and received a "not found" message.

[TiredPup]

I booted into a pristine setup. This time I installed inxi 2.3.8 from puppy noarch. It worked fine. I also installed a favorite KDE game (kshisen) as I did with the last setup. At this point the package manager is working as it should.

System: Host: puppypc7509 Kernel: 5.4.47 x86_64 (64 bit gcc: 9.3.0)
Desktop: JWM 2.4.0 Distro: fossapup64 9.0.3
Machine: Device: laptop System: Dell product: OptiPlex 760
Mobo: Dell model: 0G919G v: A01 serial: ..CN7082196FO0U5.
BIOS: Dell v: A06 date: 12/23/2009
CPU: Dual core Intel Core2 Duo E8400 (-MCP-) cache: 6144 KB
bmips: 11969
clock speeds: max: 2451 MHz 1: 2451 MHz 2: 2346 MHz
CPU Flags: acpi aperfmperf apic arch_perfmon bts clflush cmov
constant_tsc cpuid cx16 cx8 de ds_cpl dtes64 dtherm dts est
flexpriority fpu fxsr ht lahf_lm lm mca mce mmx monitor msr mtrr
nopl nx pae pat pbe pdcm pebs pge pni pse pse36 pti rep_good sep
smx sse sse2 sse4_1 ssse3 syscall tm tm2 tpr_shadow tsc vme vmx
vnmi xsave xtpr
Graphics: Card: Intel 4 Series Integrated Graphics Controller
bus-ID: 00:02.0
Display Server: X.org 1.20.8 drivers: modesetting (unloaded: fbdev,vesa)
tty size: 80x26 Advanced Data: N/A for root
Audio: Card Intel 82801JD/DO (ICH10 Family) HD Audio Controller
driver: snd_hda_intel bus-ID: 00:1b.0
Sound: Advanced Linux Sound Architecture v: k5.4.47
Network: Card-1: Intel 82567LM-3 Gigabit Network Connection
driver: e1000e v: 3.2.6-k port: ece0 bus-ID: 00:19.0
IF: eth0 state: down mac: 00:24:e8:34:fd:e9
Card-2: D-Link System DWA-140 RangeBooster N Adapter(rev.B2) [Ralink RT3072]
driver: rt2800usb v: 2.3.0 usb-ID: 001-003
IF: wlan0 state: N/A speed: N/A duplex: N/A mac: N/A
Drives: HDD Total Size: 500.1GB (3.1% used)
ID-1: /dev/sda model: WDC_WD5000AAKX size: 500.1GB
ID-1: swap-1 size: 2.15GB used: 0.00GB (0%) fs: swap dev: /dev/sda2
RAID: No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors: None detected - is lm-sensors installed and configured?
Info: Processes: 131 Uptime: 1 min Memory: 192.1/3777.2MB
Init: SysVinit runlevel: 5 Gcc sys: N/A
Client: Shell (bash 5.0.161) inxi: 2.3.8

Thank you for this. I will continue to subject this to the usual abuse to see how it holds up.

[TiredPup]

An update to my first post above. The flashing of the window manager and applications occurs when changing icon sets in JWM Desk Manager. Initially I changed the mouse pointer to default. I like the low profile black pointer. No problem there. I then elected to change the icon set to Moka. Applying that change resulted in the window flashing. Editing the picom config file resolved the issue immediately. This appears to be somewhat different from my previous experience as I do not recall the flashing being associated with changes made from the desk manager.

[666philb]

thanks for testing TiredPup & darry19662018,

new iso (RC2) will be available in the next few days.

[666philb]

fossapup64 RC2 uploaded!

kernel recompiled with bigpups missing drivers
picom compositor bugs should now be fixed (no more flashing)
picom-gtk gui updated
conky-gtk gui updated (now with weather )
missing apps from last iso back in, pburn, pclock, inkscapelite, etc
bluezalsa added. bluetooth now works for me, both speakers and bluetooth tethering to a phone.
janky_BT had a mini update, now has a volume control and also normal system sounds should work after disconnecting speaker.
JWMdesk updated to add new conky,picom & dunst GUIs
URXVT transparency .... turn on/off in JWMdesk>>>window effects.
no_csd (no client side display) adds the title bar back for gnome apps like evince, gedit etc.
tweaked firewall icons so look better on dark taskbar.
Xlock .... thought it was fixed but just discovered that it needs a further tweak. will update through quickpet
quickpet links should now point towards this forum.

One bug i can't figure out is the default repositories in the PPM .the fossapup repo is missing until you add it in the PPM settings.
if anyone knows where the settings are for this let me know. note that fossapup64 uses an older PPM than the one in woofce.

download link on first post

enjoy

[666philb]

In the previous release when I installed inxi 3.0 from Ubuntu repos inxi would complain that python deps were not installed. They are installed as part of the original build. Re installing python from package manager would "fix" this problem. However, in RC1 the program complains

Can't locate Data/Dumper.pm in @INC (you may need to install the Data::Dumper module) (@INC contains: /etc/perl /usr/local/lib/x86_64-linux-gnu/perl/5.30.0 /usr/local/share/perl/5.30.0 /usr/lib/x86_64-linux-gnu/perl5/5.30 /usr/share/perl5 /usr/lib/x86_64-linux-gnu/perl/5.30 /usr/share/perl/5.30 /usr/local/lib/site_perl /usr/lib/x86_64-linux-gnu/perl-base) at /usr/bin/inxi line 23.
BEGIN failed--compilation aborted at /usr/bin/inxi line 23.

The package manager broke after initial usage. It will not start from menu. I attempted to start it from terminal and received a "not found" message.

hi TiredPup,

puppy has most of it's Perl packages in the devx.sfs.
installing the devx should make inxi work

[bigpup]

One bug i can't figure out is the default repositories in the PPM .the fossapup repo is missing until you add it in the PPM settings.
if anyone knows where the settings are for this let me know. note that fossapup64 uses an older PPM than the one in woofce

The actual setting for what repositories are listed is in /root/.packages/PKGS_MANAGEMENT file.
The last line lists the repositories:

Code: Select all

PKG_REPOS_ENABLED=

I looked in the Fossapup64 9.0.4 iso in /root/.packages/PKGS_MANAGEMENT file.

Code: Select all

PKG_REPOS_ENABLED=

does not list the Packages-puppy-fossa64-official.
All the other ones are listed.


Initial testing:
Fossapup64 9.0.4, frugal, using save folder.
All my previous problems with Fossapup64, seem to be fixed.

[iarda1]

Hi 666philb,

Thanks for the new new RC2.
From my view aesthetically complete, and nice look (new icons in rox and that...)

I find a lot missing full install (why?), usually I manage more data that delay closing with savefiles.

From many years I don't need compatibility with any other S.O. diferent of puppylinux.
In fact for a long time used ext4 with NO swapfiles space.
Is there any script to make a complete install to my HD drives?
My experience in hardware pc clutter has no problem. Software so...

Greetings.

[davids45]

G'day,

Posting fron fossapup64-9.0.4-rc2, but as in previous fossas, could only get networking via my TP-Link USB dongle by switching to another kernel (ozsouth's 5.6.18) and replacing fossa's frdv with one just having the firmware needed for the dongle (ath9k_htc).

I'll try another kernel, when I can, as a cross-check.

And with the original fossa frdv to see which 'drv' is giving my system (old HP small-form desktop) this on-going failure with the fossas (frdv or zdrv?).

Bionic and other recent Ubuntu Pups (and ScPups) have not had this networking failure with my USB wifi adapter.

So I'm puzzled.

David S.

[iarda1]

Hi
Found conkyrc config file directly saved in root.
Shouldn't be in root/.config folder?

[one]

Hi 666philb

I have a (may be stupid) question regarding updating fossapup64. I have a frugal usb install, booted via grub4dos. If I replace the old v.9.0.3-sfs'es with the new v.9.0.4-sfs'es fossapup tries to load the old 9.0.3-sfs'es (now named xxx9.0.4.sfs) and fails of course. How can I change this? Should I simply rename the new ones to xxx9.0.3.sfs?
Or do a new install and use old savefolder?

Many thanks for your work ...

[666philb]

Hi 666philb

I have a (may be stupid) question regarding updating fossapup64. I have a frugal usb install, booted via grub4dos. If I replace the old v.9.0.3-sfs'es with the new v.9.0.4-sfs'es fossapup tries to load the old 9.0.3-sfs'es (now named xxx9.0.4.sfs) and fails of course. How can I change this? Should I simply rename the new ones to xxx9.0.3.sfs?
Or do a new install and use old savefolder?

Many thanks for your work ...

hi one,

you need the initrd.gz & vmlinuz as well as all the sfs's

[666philb]

One bug i can't figure out is the default repositories in the PPM .the fossapup repo is missing until you add it in the PPM settings.
if anyone knows where the settings are for this let me know. note that fossapup64 uses an older PPM than the one in woofce

The actual setting for what repositories are listed is in /root/.packages/PKGS_MANAGEMENT file.
The last line lists the repositories:

Code: Select all

PKG_REPOS_ENABLED=

I looked in the Fossapup64 9.0.4 iso in /root/.packages/PKGS_MANAGEMENT file.

Code: Select all

PKG_REPOS_ENABLED=

does not list the Packages-puppy-fossa64-official.
All the other ones are listed.


Initial testing:
Fossapup64 9.0.4, frugal, using save folder.
All my previous problems with Fossapup64, seem to be fixed.

aha!!! that's the one ... thanks bigpup

[666philb]

Hi 666philb,

Thanks for the new new RC2.
From my view aesthetically complete, and nice look (new icons in rox and that...)

I find a lot missing full install (why?), usually I manage more data that delay closing with savefiles.

From many years I don't need compatibility with any other S.O. diferent of puppylinux.
In fact for a long time used ext4 with NO swapfiles space.
Is there any script to make a complete install to my HD drives?
My experience in hardware pc clutter has no problem. Software so...

Greetings.

hi iarda1,

full install is still there but hidden to stop new users using it when the default (and indeed the way puppy is designed) is to have a frugal install.
to do a full install open a terminal and ...

Code: Select all

export ENABLE_FULLINSTALL=1
puppyinstaller

i will add this info to the first post when fossapup is complete

[666philb]

G'day,

Posting fron fossapup64-9.0.4-rc2, but as in previous fossas, could only get networking via my TP-Link USB dongle by switching to another kernel (ozsouth's 5.6.18) and replacing fossa's frdv with one just having the firmware needed for the dongle (ath9k_htc).

I'll try another kernel, when I can, as a cross-check.

And with the original fossa frdv to see which 'drv' is giving my system (old HP small-form desktop) this on-going failure with the fossas (frdv or zdrv?).

Bionic and other recent Ubuntu Pups (and ScPups) have not had this networking failure with my USB wifi adapter.

So I'm puzzled.

David S.

hi davids45,
the fdrv.sfs contains the firmware and the zdrv.sfs is the kernel & as far as i can tell ath9k_htc firmware and drivers are there

/lib/modules/5.4.47/kernel/drivers/net/wireless/ath/ath9k/ath9k_htc.ko
/lib/firmware/ath9k_htc

one thing to try is to create the file /etc/modprobe.d/ath9k_htc.conf

Code: Select all

options ath9k_htc use_dev_fw=1

if that fails i will need more info from pupsysinfo , lspci, lsusb (maybe from a working pup so a can confirm the driver) also could you PM me your /var/log/messages when this is plugged in

[666philb]

Hi
Found conkyrc config file directly saved in root.
Shouldn't be in root/.config folder?

hi iarda1

i put it there so that it's easy to find and edit for users

[TiredPup]

does not list the Packages-puppy-fossa64-official.
All the other ones are listed.

Are you talking about this line at the end of the file?

[PKG_REPOS_ENABLED=' Packages-puppy-fossa64-official Packages-puppy-noarch-official Packages-puppy-tahr64-official Packages-puppy-xenial64-official Packages-ubuntu-focal-main Packages-ubuntu-focal-multiverse Packages-ubuntu-focal-universe '
/quote]

[iarda1]

That's is it! What needed.

export ENABLE_FULLINSTALL=1
puppyinstaller

Posting now from Fossapup64 9.0.4 RC2, Full Install on 500Gb HD, managing YouTube extended works.

Thanks very much 666philb. Hugely updated now.

[TiredPup]

666philb wrote:

hi TiredPup,

puppy has most of it's Perl packages in the devx.sfs.
installing the devx should make info work

I have loaded the devx file. Thanks.

I have noticed that Conky does not maintain transparency. It will start transparent but if I open an app full screen or I simply walk away from my desk for a while I will come back to a black background on Conky.

9.0.4 RC2 is working very well so far.

[666philb]

666philb wrote:

hi TiredPup,

puppy has most of it's Perl packages in the devx.sfs.
installing the devx should make info work

I have loaded the devx file. Thanks.

I have noticed that Conky does not maintain transparency. It will start transparent but if I open an app full screen or I simply walk away from my desk for a while I will come back to a black background on Conky.

9.0.4 RC2 is working very well so far.

hi TiredPup,

this can happen when there's a disruption in the internet. you could edit /root/conkyrc and remove or comment out the network stuff near the bottom and have a static version

Code: Select all

${color}Incoming ${downspeedf wlan0} KB/s ${alignr}${color AAE4FF}${downspeedgraph wlan0 10,60}
${color}Total Received${alignr}${totaldown wlan0}
${color}Sending ${upspeedf wlan0} KB/s ${alignr}${color 17C2B8}${upspeedgraph wlan0 10,60}
${color}Total Sent${alignr}${totalup wlan0}

Code: Select all

swap wlan0 for eth0 as necessary

[davids45]

G'day 666philb,

Thanks for your reply to my post re fossapup64s not connecting unless I change the fdrv, zdrv & vmlinuz (ie to a different kernel to its supplied 5.4.47).

With the working 5.6.18 kernel, I restored the original fossapup64's fdrv and the network connection was still good (using the same save-file as at start-up in all my tests). So it's not the firmware giving me my no-networking problem in the 64-bit fossas.

I have now tried kernels:
5.6.18 (ozsouth) = works
5.7.9-lxpup = works
4.6.18 lxpup = works
and then back to original 5.4.47 which still fails to show wlan0 using any wizard, so no printing, no scanning and no internet .

I should look to see if there's another huge-kernel version of 5.4.47 somewhere?

And I'll later re-boot to fossapup64 in its original state and try your suggestions in your last post. And repeat with a working kernel in fossa if that would help sort out what's wrong with my set-up??

Thanks again for all your time.

David S.

[TiredPup]

666philb wrote:

hi TiredPup,

this can happen when there's a disruption in the internet. you could edit /root/conkyrc and remove or comment out the network stuff near the bottom and have a static version
CODE: SELECT ALL

${color}Incoming ${downspeedf wlan0} KB/s ${alignr}${color AAE4FF}${downspeedgraph wlan0 10,60}
${color}Total Received${alignr}${totaldown wlan0}
${color}Sending ${upspeedf wlan0} KB/s ${alignr}${color 17C2B8}${upspeedgraph wlan0 10,60}
${color}Total Sent${alignr}${totalup wlan0}
CODE: SELECT ALL

swap wlan0 for eth0 as necessary

Thank you. I will do that.

[watchdog]

I'm enjoing with satisfaction Scpup64 on my hardware. I tried fossapup64 on the same hardware and it's quite unresponsive and unusable. Fossapup64 is the first puplet I can't use on my hardware. On my hardware I can even run fatdog64. I think that fossapup64 is quite unfit for old hardware. My specs:

Code: Select all

System:    Host: puppypc19506 Kernel: 5.7.2-lxpup64 x86_64 (64 bit) Desktop: JWM 2.3.7
           Distro: ScPup64 20.06
Machine:   Device: laptop System: Hewlett-Packard product: HP 530 Notebook PC v: F.07 serial: CND8160FHM
           Mobo: Hewlett-Packard model: 30D5 v: KBC Version 82.15
           BIOS: Hewlett-Packard v: 68MVU Ver. F.07 date: 03/18/2008
Battery    C1AC: charge: 20.0 Wh 100.0% condition: 20.0/20.0 Wh (100%)
CPU:       Single core Intel Celeron M 520 (-UP-) cache: 1024 KB speed/max: 1115/1600 MHz
Graphics:  Card: Intel Mobile 945GSE Express Integrated Graphics Controller
           Display Server: X.org 1.20.8 driver: intel
           tty size: N/A Advanced Data: N/A for root
Audio:     Card-1 Intel NM10/ICH7 Family High Definition Audio Controller
           driver: snd_hda_intel
           Card-2 Z-Star Micro Venus USB2.0 Camera driver: USB Audio
           Sound: Advanced Linux Sound Architecture v: k5.7.2-lxpup64
Network:   Card-1: Intel 82562ET/EZ/GT/GZ - PRO/100 VE (LOM) Ethernet Controller Mobile
           driver: e100
           IF: eth0 state: up speed: 100 Mbps duplex: full mac: 00:1e:ec:23:fd:95
           Card-2: Broadcom and subsidiaries BCM4312 802.11b/g LP-PHY driver: b43-pci-bridge
           IF: wlan0 state: down mac: 00:21:00:09:91:98
Drives:    HDD Total Size: 280.1GB (39.1% used)
           ID-1: /dev/sda model: TOSHIBA_MK1246GS size: 120.0GB
           ID-2: USB /dev/sdb model: USB_Disk size: 160.0GB
Partition: ID-1: swap-1 size: 1.07GB used: 0.32GB (30%) fs: swap dev: /dev/sda2
RAID:      No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors:   System Temperatures: cpu: 74.0C mobo: N/A
           Fan Speeds (in rpm): cpu: N/A
Info:      Processes: 130 Uptime: 18 min Memory: 841.8/1479.2MB
           Client: Shell (urxvt) inxi: 2.3.8 

[666philb]

I'm enjoing with satisfaction Scpup64 on my hardware. I tried fossapup64 on the same hardware and it's quite unresponsive and unusable. Fossapup64 is the first puplet I can't use on my hardware. On my hardware I can even run fatdog64. I think that fossapup64 is quite unfit for old hardware. My specs:

Code: Select all

System:    Host: puppypc19506 Kernel: 5.7.2-lxpup64 x86_64 (64 bit) Desktop: JWM 2.3.7
           Distro: ScPup64 20.06
Machine:   Device: laptop System: Hewlett-Packard product: HP 530 Notebook PC v: F.07 serial: CND8160FHM
           Mobo: Hewlett-Packard model: 30D5 v: KBC Version 82.15
           BIOS: Hewlett-Packard v: 68MVU Ver. F.07 date: 03/18/2008
Battery    C1AC: charge: 20.0 Wh 100.0% condition: 20.0/20.0 Wh (100%)
CPU:       Single core Intel Celeron M 520 (-UP-) cache: 1024 KB speed/max: 1115/1600 MHz
Graphics:  Card: Intel Mobile 945GSE Express Integrated Graphics Controller
           Display Server: X.org 1.20.8 driver: intel
           tty size: N/A Advanced Data: N/A for root
Audio:     Card-1 Intel NM10/ICH7 Family High Definition Audio Controller
           driver: snd_hda_intel
           Card-2 Z-Star Micro Venus USB2.0 Camera driver: USB Audio
           Sound: Advanced Linux Sound Architecture v: k5.7.2-lxpup64
Network:   Card-1: Intel 82562ET/EZ/GT/GZ - PRO/100 VE (LOM) Ethernet Controller Mobile
           driver: e100
           IF: eth0 state: up speed: 100 Mbps duplex: full mac: 00:1e:ec:23:fd:95
           Card-2: Broadcom and subsidiaries BCM4312 802.11b/g LP-PHY driver: b43-pci-bridge
           IF: wlan0 state: down mac: 00:21:00:09:91:98
Drives:    HDD Total Size: 280.1GB (39.1% used)
           ID-1: /dev/sda model: TOSHIBA_MK1246GS size: 120.0GB
           ID-2: USB /dev/sdb model: USB_Disk size: 160.0GB
Partition: ID-1: swap-1 size: 1.07GB used: 0.32GB (30%) fs: swap dev: /dev/sda2
RAID:      No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors:   System Temperatures: cpu: 74.0C mobo: N/A
           Fan Speeds (in rpm): cpu: N/A
Info:      Processes: 130 Uptime: 18 min Memory: 841.8/1479.2MB
           Client: Shell (urxvt) inxi: 2.3.8 

hi watchdog,

yes those specs are too low for fossapup64. the minimum suggested requirements will be core2duo & 2gb ram.
runs nicely on a 2007 vista ready laptop but anything from the XP era (especially single core) will struggle with this fossa.

maybe give peebees a try viewtopic.php?f=33&t=63

or try removing the adrv.sfs

[davids45]

G'day 666philb,
I done a bit more trial&erroring with fossa and its non-networking for my wlan0 adapter.

I tried your script for the /etc/modprobe.d/ath9k.conf file and it had no effect in allowing wifi networking. The original fossa config script was the same as in other working Pups and the edited version worked in other Pups, just not in Fossa64.

text in /etc/modprobe.d/ config file:
in a working Slacko64:
options ath9k nohwcrypt=1

in a working Bionic64 as per posted advice:
options ath9k_htc use_dev_fw=1

in a non-working Fossa (2 versions tried & failed):
options ath9k nohwcrypt=1
options ath9k_htc use_dev_fw=1

result seems to be this config script, either version, has no effect on networking

I next looked at the Puppy SysInformation for some Pups, particularly the Drivers as it seems mine is a driver problem in Fossa, the firmware looking OK.

Screenshots have ath9k drivers listed and only difference is ath9k_htc lists 1 user in the failing Fossa but 0 users in new-kernel-working Fossa and another Pup. I have no idea what this means.

Kernel switch tests.
I could not find another huge-kernel for 5.4.47 other than yours but switched the fossa-supplied kernel with a fresh download of the archived huge-kernel-5.4.47 and still had no networking.
I then tried the 5.4.47 kernel in a BionicPup64-8.0 which had networking with its original 4.something kernel and several other kernels I tested it with. The 5.4.47 kernel saw this BionicPup64 also lose its wifi when network wizards were run to get a wifi connection.

So it is something in the zdrv or vmlinuz of fossa's 5.4.47 kernel that wont work with my wifi dongle and wont work in another Pup. Change the kernel and all is networking OK again.

Posting from fossapup64-9.0.4 with a 5.7.9-lxpup64 kernel.

Happy to try anything else to explain my problem in Fossa.

David S.

[abcd1232]

I have problem. No speaker beep in terminal.

[666philb]

I have problem. No speaker beep in terminal.

hi abcd1232,
move /root/Startup/disablebeep to /root/Startup/disabled and reboot

i hate that beep