icake Chinese language pets

icake · Post by **icake** » Thu Apr 01, 2021 7:10 am

pfeco released 4 Puppy systems on Jan 24, 2021:
chimaerapup64-10.2.1-6-Lite, chimaerapup-10.2.1-6-Lite, bullseyepup64-10.2.1-6-Lite and bullseyepup-10.2.1-6-Lite

more information and discussions: https://skamilinux.hu/phpBB3/viewtopic. ... 1&start=78

download isoes:
chimaerapup64-10.2.1-6-Lite.iso: https://drive.google.com/drive/folders/ ... i7HBluiNS8
chimaerapup-10.2.1-6-Lite.iso: https://drive.google.com/drive/folders/ ... sp=sharing
bullseyepup64-10.2.1-6-Lite.iso: https://drive.google.com/drive/folders/ ... 5q8UO1syDU
bullseyepup-10.2.1-6-Lite.iso: https://drive.google.com/drive/folders/ ... sp=sharing

I have created 4 half-Chinese language pets each for chimaerapup64-10.2.1-6-Lite, chimaerapup-10.2.1-6-Lite, bullseyepup64-10.2.1-6-Lite and bullseyepup-10.2.1-6-Lite:
fcitx Chinese input platform:
chimaerapup64-10.2.1-6-Lite and bullseyepup64-10.2.1-6-Lite: fcitx64_4.2.9-en-zh-bionic-21.1.3.pet (15 mb)
chimaerapup-10.2.1-6-Lite and bullseyepup-10.2.1-6-Lite: fcitx_4.2.9-en-zh-bionic-20.0.0a.pet (19 mb)

ibus Chinese input platform:
chimaerapup64-10.2.1-6-Lite and bullseyepup64-10.2.1-6-Lite: ibus64_1.5.19-en-zh-bionic-21.1.3.pet (34 mb)
chimaerapup-10.2.1-6-Lite and bullseyepup-10.2.1-6-Lite: ibus_1.5.17-en-zh-bionic-20.0.0a.pet (29 mb)

scim Chinese input platform:
chimaerapup64-10.2.1-6-Lite and bullseyepup64-10.2.1-6-Lite: scim64_1.4.18-en-zh-bionic-21.1.3.pet (12 mb)
chimaerapup-10.2.1-6-Lite and bullseyepup-10.2.1-6-Lite: scim_1.4.18-en-zh-bionic-20.0.0a.pet (13 mb)

yong Chinese input platform:
chimaerapup64-10.2.1-6-Lite and bullseyepup64-10.2.1-6-Lite: yong3264_20201122-en-zh-bionic-21.1.3.pet (8 mb)
chimaerapup-10.2.1-6-Lite and bullseyepup-10.2.1-6-Lite: yong3264_20201122-en-zh-bionic-20.0.0a.pet (8 mb)

Plus 2 Chinese language pets each for chimaerapup64-10.2.1-6-Lite, chimaerapup-10.2.1-6-Lite, bullseyepup64-10.2.1-6-Lite and bullseyepup32-10.2.1-6-Lite:
Simplified Chinese:
chimerapup64-10.2.16Lite-zhcn-21.1.3.pet (2 mb)
bullseyepup64-10.2.16Lite-zhcn-21.1.3.pet (2 mb)
chimaerapup-10.2.16Lite-zhcn-20.0.0a.pet (2 mb)
bullseyepup-10.2.16Lite-zhcn-20.0.0a.pet (2 mb)

Traditional Chinese:
chimerapup64-10.2.16Lite-zhhk-21.1.3.pet (2 mb)
bullseyepup64-10.2.16Lite-zhhk-21.1.3.pet (2 mb)
chimaerapup-10.2.16Lite-zhhk-20.0.0a.pet (2 mb)
bullseyepup-10.2.16Lite-zhhk-20.0.0a.pet (2 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in chimaerapup64-10.2.1-6-Lite, chimaerapup-10.2.1-6-Lite, bullseyepup64-10.2.1-6-Lite and bullseyepup32-10.2.1-6-Lite

(b) the name+version corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for chimaerapup64-10.2.1-6-Lite, chimaerapup-10.2.1-6-Lite, bullseyepup64-10.2.1-6-Lite and bullseyepup32-10.2.1-6-Lite

for more information about the fcitx, ibus, scim and yong pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders.

icake · Post by **icake** » Thu Apr 01, 2021 7:11 am

peebee has released BionicPup32 8.0.26 on Feb 24, 2021

More information and forum discussions: viewtopic.php?f=115&t=165&start=35

Download: http://distro.ibiblio.org/puppylinux/pu ... cpup32.htm

I have created 4 half-Chinese language pets for BionicPup32 8.0.26:

fcitx Chinese input platform: fcitx_4.2.9-en-zh-bionic-20.0.1.pet (17 mb)

ibus Chinese input platform: ibus_1.5.7-en-zh-bionic-20.0.1.pet (29 mb)

scim Chinese input platform: scim_1.4.14-en-zh-bionic-20.0.1.pet (16 mb)

yong Chinese input platform: yong3264_20201122-en-zh-bionic-20.0.1.pet (8 mb)

Plus 2 Chinese language pets each for BionicPup32 8.0.26:
Simplified Chinese: bionicpup32-8.0.26-zhcn-20.0.1.pet (4 mb)

Traditional Chinese: bionicpup32-8.0.26-zhhk-20.0.1.pet (4 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in BionicPup32 8.0.26

(b) the Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for BionicPup32 8.0.26

for more information about the fcitx, ibus, scim and yong half-Chinese pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

icake · Post by **icake** » Thu Apr 01, 2021 7:12 am

peebee released arch64 20.05.03 and arch32 20.05.03 on Oct 9, 2020

Main features:
experimental Puppy systems with arch linux favour

More information: viewtopic.php?f=33&t=56&start=13

Download iso:
arch64 20.05.03: http://www.smokey01.com/peebee/downloads/a64pup/
arch32 20.05.03: http://www.smokey01.com/peebee/downloads/a32pup/

I have created 3 half-Chinese language pets each for arch64 20.05.03 and arch32 20.05.03:
fcitx Chinese input platform:
arch64 20.05.03: fcitx64_4.2.7-en-zh-raring-14.0.6.pet (14 mb)
arch32 20.05.03: fcitx_4.2.７-en-zh-raring-14.3.7.pet (16 mb)

(ibus cannot run in arch64 20.05.03 and arch32 20.05.03)

scim Chinese input platform:
arch64 20.05.03: scim64_1.4.14-en-zh-raring-14.0.6.pet (13 mb)
arch32 20.05.03: scim_1.4.14-en-zh-raring-14.3.7.pet (14 mb)

yong Chinese input platform:
arch64 20.05.03: yong3264_20201122-en-zh-raring-14.0.6.pet (9 mb)
arch32 20.05.03: yong3264_20201122-en-zh-raring-14.3.7.pet (9 mb)

Plus 2 Chinese language pets each for arch64 20.05.03 and arch32 20.05.03:
Simplified Chinese:
arch64 20.05.03: arch64-20.05.03-zhcn-14.0.6.pet (2 mb)
arch32 20.05.03: arch32-20.05.03-zhcn-14.3.7.pet (2 mb)

Traditional Chinese:
arch64 20.05.03: arch64-20.05.03-zhhk-14.0.6.pet (2 mb)
arch32 20.05.03: arch32-20.05.03-zhhk-14.3.7.pet (1 mb)

To use:
(a) any 1 of the 3 half-Chinese language pets will enable you to display and input Chinese in arch64 20.05.03 （use 14.0.6 pets） and arch32 20.05.03 （use 14.3.7 pets）

(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for arch64 20.05.03 and arch32 20.05.03

For more information about the fcitx, ibus, scim and yong half-Chinese language pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

icake · Post by **icake** » Thu Apr 01, 2021 7:13 am

peebee recently released LxPupFocal32-21.02+4

More information and download LxPupFocal32-21.02+4.iso: https://sourceforge.net/projects/lxpup/ ... xPup21.02/

I have created 4 half-Chinese language pets each for LxPupFocal32-21.02+4

fcitx Chinese input platform: fcitx_4.2.7-en-zh-bionic-14.3.6.pet (16 mb)

ibus Chinese input platform: ibus_1.5.17-en-zh-bionic-14.3.6.pet (28 mb)

scim Chinese input platform: scim_1.4.14-en-zh-bionic-14.3.6.pet (20 mb)

yong Chinese input platform: yong3264_20201122-en-zh-bionic-14.3.6.pet (8 mb)

Plus 2 Chinese language pets for LxPupFocal32-21.02+4:

Simplified Chinese: lxpupfocal-21.02.04-zhcn-14.3.6.pet (2 mb)

Traditional Chinese: lxpupfocal-21.02.04-zhhk-14.3.6.pet (2 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in LxPupFocal32-21.02+4

(b) the name+version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for LxPupFocal32-21.02+4

for more information about the fcitx, ibus, scim and yong pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

icake · Post by **icake** » Thu Apr 01, 2021 7:14 am

peebee recently released UPupFF+D-20.12+4 and UPupHH+D-21.04.alpha+2

More information:
upupFF: viewtopic.php?p=3097#p3097
upupHH: viewtopic.php?f=124&t=472&start=30

download iso:
upupFF update to +4: https://sourceforge.net/projects/zestyp ... B/updates/
upupHH: https://sourceforge.net/p/zestypup/acti ... cc52dcf03c

I have created 4 half-Chinese language pets each for UPupFF+D-20.12+4 and UPupHH+D-21.04.alpha+2:

fcitx Chinese input platform:
for UPupFF+D-20.12+4: fcitx_4.2.9-en-zh-bionic-20.0.0s.pet (16 mb)
for UPupHH+D-21.04.alpha+2: fcitx_4.2.7-en-zh-bionic-14.3.6.pet (16 mb)

ibus Chinese input platform:
for UPupFF+D-20.12+4: ibus_1.5.17-en-zh-bionic-20.0.0s.pet (28 mb)
for UPupHH+D-21.04.alpha+2: ibus_1.5.17-en-zh-bionic-14.3.6.pet (28 mb)

scim Chinese input platform:
for UPupFF+D-20.12+4: scim_1.4.14-en-zh-bionic-20.0.0s.pet (20 mb)
for UPupHH+D-21.04.alpha+2: scim_1.4.14-en-zh-bionic-14.3.6.pet (20 mb)

yong Chinese input platform:
for UPupFF+D-20.12+4: yong3264_20201122-en-zh-bionic-20.0.0s.pet (8 mb)
for UPupHH+D-21.04.alpha+2: yong3264_20201122-en-zh-bionic-14.3.6.pet (8 mb)

Plus 2 Chinese language pets each for UPupFF+D-20.12+4 and UPupHH+D-21.04.alpha+2:
Simplified Chinese:
upupffD-20.12.04-zhcn-20.0.0s.pet (2 mb)
upuphhD-21.04.a2-zhcn-14.3.6.pet (2 mb)

Traditional Chinese:
upupffD-20.12.04-zhhk-20.0.0s.pet (2 mb)
upuphhD-21.04.a2-zhhk-14.3.6.pet (2 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in UPupFF+D-20.12+4 (please use the 20.0.0s pets); UPupHH+D-21.04.alpha+2 (please use the 14.3.6 pets)

(b) the name+version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for UPupFF+D-20.12+4 and UPupHH+D-21.04.alpha+2

for more information about the fcitx, ibus, scim and yong pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

icake · Post by **icake** » Thu Apr 01, 2021 7:14 am

peebee recently released LxPupBionic32-19.03+26.iso

More information and download LxPupBionic32-19.03+26.iso: https://sourceforge.net/projects/lxpup/ ... xPup19.03/

I have created 3 half-Chinese language pets each for LxPupBionic32-19.03+26

fcitx Chinese input platform: fcitx_4.2.7-en-zh-bionic-14.3.6.pet (16 mb)

ibus Chinese input platform: ibus cannot run in LxPupBionic32-19.03+26

scim Chinese input platform: scim_1.4.14-en-zh-bionic-14.3.6.pet (20 mb)

yong Chinese input platform: yong3264_20201122-en-zh-bionic-14.3.6.pet (8 mb)

Plus 2 Chinese language pets for LxPupBionic32-19.03+26:

Simplified Chinese: lxpupbionic-19.03.26-zhcn-14.3.6.pet (2 mb)

Traditional Chinese: lxpupbionic-19.03.26-zhhk-14.3.6.pet (2 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in LxPupBionic32-19.03+26

(b) the name+version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for LxPupBionic32-19.03+26

for more information about the fcitx, ibus, scim and yong pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

wuxiandianzi · Post by **wuxiandianzi** » Thu Apr 29, 2021 12:48 am

兄弟，请看站内信！

icake · Post by **icake** » Sat May 01, 2021 12:00 am

mistfire has recently released QuickPup 20.06.7 to 21.01.0

More information and forum discussions:
QuickPup 20.06.07：viewtopic.php?f=33&t=1743&start=59
QuickPup 20.06.08：viewtopic.php?f=33&t=1743&start=63
QuickPup 20.06.10：viewtopic.php?f=33&t=1743&start=67
QuickPup 20.06.11：viewtopic.php?f=33&t=1743&start=68
QuickPup 21.00：viewtopic.php?f=33&t=1743&start=80
QuickPup 21.01.00：viewtopic.php?f=33&t=1743&start=82

Download iso:
QuickPup 20.06.07: https://drive.google.com/file/d/1OhmUBV ... sp=sharing
QuickPup 20.06.08：https://drive.google.com/file/d/1hjhJiZ ... sp=sharing
QuickPup 20.06.10：https://drive.google.com/file/d/1k6IR5r ... sp=sharing
QuickPup 20.06.11：https://drive.google.com/file/d/1m4yhkI ... sp=sharing
QuickPup 21.00： https://drive.google.com/file/d/1YTGwNX ... sp=sharing
QuickPup 21.01.00：https://drive.google.com/file/d/1RvjR3O ... sp=sharing

I have created 4 half-Chinese language pets for QuickPup 20.06.7 to 21.01.0:

fcitx Chinese input platform:
fcitx_4.2.7-en-zh-bionic-20.1.0.pet (17 mb)

ibus Chinese input platform:
ibus_1.5.17-en-zh-bionic-20.1.0.pet (34 mb)

scim Chinese input platform:
scim_1.4.14-en-zh-bionic-20.1.0.pet (16 mb)
please note that scim cannot run in quickpup-21.01.00

yong Chinese input platform:
yong3264_20201122-en-zh-bionic-20.1.0.pet (8 mb)

Plus 2 Chinese language pets each for QuickPup 20.06.7 to 21.01.0:
Simplified Chinese:
quickpup-20.06.07-zhcn-20.1.0.pet (2 mb)
quickpup-20.06.08-zhcn-20.1.0.pet (2 mb)
quickpup-20.06.10-zhcn-20.1.0.pet (2 mb)
quickpup-20.06.11-zhcn-20.1.0.pet (2 mb)
quickpup-21.0.0-zhcn-20.1.0.pet (2 mb)
quickpup-21.01.00-zhcn-20.1.0.pet (2 mb)

Traditional Chinese:
quickpup-20.06.07-zhhk-20.1.0.pet (2 mb)
quickpup-20.06.08-zhhk-20.1.0.pet (2 mb)
quickpup-20.06.10-zhhk-20.1.0.pet (2 mb)
quickpup-20.06.11-zhhk-20.1.0.pet (2 mb)
quickpup-21.0.0-zhhk-20.1.0.pet (2 mb)
quickpup-21.01.00-zhhk-20.1.0.pet (2 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in QuickPup 20.06.7 to 21.01.0

(b) the name corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for QuickPup 20.06.7 to 21.01.0

for more information about the fcitx, ibus, scim and yong half-Chinese pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

icake · Post by **icake** » Sat May 01, 2021 12:01 am

csipesz released slacko 5.7.0 PQ3 K.3.10.32 Eng/Hun CD on 2015 Oct 21 and I recently found 2 precise 5.5 systems

for more information:
slacko 5.7.0 PQ3 K.3.10.32 Eng/Hun CD: https://skamilinux.hu/phpBB3/viewtopic.php?f=7&t=258
precise 5.5 retro: https://sourceforge.net/projects/puppyszoftver/
precise 5.5 indian summer: https://archive.org/details/Puppy_Linux ... er-edition

download iso:
slacko-5.7.0K3.10.32EngHun5thEd2021March.iso - 699,7 Mb
https://drive.google.com/drive/folders/ ... sp=sharing
Precise-5.5-retro.iso: https://sourceforge.net/projects/puppys ... retro.iso/
precise 5.5 indian summer: https://archive.org/details/Puppy_Linux ... er-edition

I have created 3 half-Chinese language pets for slacko 5.7.0 PQ3 K.3.10.32 Eng/Hun CD, precise 5.5 retro and precis indian summee 5.5r:
fcitx Chinese input platform: fcitx_4.2.0-en-zh-precise-12.2.4.pet (21 mb)

ibus Chinese input platform: ibus cannot run in slacko 5.7.0 PQ3 K.3.10.32 Eng/Hun CD, precise 5.5 retro and precise 5.5 indian summer

scim Chinese input platform: scim_1.4.9-en-zh-precise-12.2.4.pet (25 mb)

yong Chinese input platform: yong3264_20201122-en-zh-precise-12.2.4.pet (14 mb)

Plus 2 Chinese language pets each for slacko 5.7.0 PQ3 K.3.10.32 Eng/Hun CD, precise 5.5 retro and precise 5.5 indian summer:
Simplified Chinese:
slacko-5.7.0k310322021mar-zhcn-12.2.4.pet (3 mb)
precise-5.5retro-zhcn-12.2.4.pet (3 mb)
precise-5.5indian_summer-zhcn-12.2.4.pet (3 mb)

Traditional Chinese:
slacko-5.7.0k310322021mar-zhhk-12.2.4.pet (3 mb)
precise-5.5retro-zhhk-12.2.4.pet (3 mb)
precise-5.5indian_summer-zhhk-12.2.4.pet (3 mb)

To use:
(a) any 1 of the 3 half-Chinese language pets will enable you to display and input Chinese in slacko 5.7.0 PQ3 K.3.10.32 Eng/Hun CD, precise 5.5 retro and precise 5.5 indian summer

(b) the Chinese language pets will give you Simplified Chinese (use zhcn pet) or Traditional Chinese (use zhhk pet) desktop menus, icon labels, tooltips for slacko 5.7.0 PQ3 K.3.10.32 Eng/Hun CD, precise 5.5 retro and precise 5.5 indian summer

for more information about the fcitx, scim and yong half-Chinese pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

icake · Post by **icake** » Sat May 01, 2021 12:02 am

Besides releasing the uefi version of jakalpup 0.0 system in Oct 21, 2020, puddlemoon has recently released more versions: full, slim and multiboot

More information and forum discussions:
viewtopic.php?f=119&t=1148

Download:
jakalpup 0.0 full (898mb), slim (637mb); multiboot (970mb)
https://drive.google.com/drive/folders/ ... sp=sharing
https://archive.org/details/Puppy_Linux_jackalpup

I have created 4 half-Chinese language pets for jackalpup 0.0 full and slim:

fcitx Chinese input platform:
fcitx64_4.2.9-en-zh-bionic-23.0.0s.pet (19 mb)

ibus Chinese input platform:
ibus64_1.5.23-en-zh-bionic-23.0.0s.pet (27 mb)

scim Chinese input platform:
scim64_1.4.9-en-zh-bionic-23.0.0s.pet (12 mb)

yong Chinese input platform:
yong3264_20201122-en-zh-bionic-23.0.0s.pet (8 mb)

Plus 2 Chinese language pets for jackalpup 0.0 full and slim:

Simplified Chinese:
jackalpup64-0.0full-zhcn-23.0.0s.pet (2 mb) (applicable to both full and slim iso)

Traditional Chinese:
jackalpup64-0.0full-zhhk-23.0.0s.pet (2 mb) (applicable to both full and slim iso)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in jackalpup 0.0 full and slim

(b) the 2 Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for jackalpup 0.0 full and slim

for more information about the fcitx64, ibus64, scim64 and yong3264 pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

icake · Post by **icake** » Sat May 01, 2021 12:03 am

Maxxweell released Margaret64-1.0.iso on Feb 25, 2021

More information: viewtopic.php?f=112&t=2255

download Margaret64-1.0.iso: https://drive.google.com/file/d/1iGnYct ... sp=sharing

I have created 3 half-Chinese language pets for Margaret64-1.0:
fcitx Chinese input platform:
fcitx64_4.2.7-en-zh-raring-14.0.7.pet (14 mb)

(ibus cannot run in Margaret64-1.0)

scim Chinese input platform:
scim64_1.4.14-en-zh-raring-14.0.7.pet (13 mb)

yong Chinese input platform:
yong3264_20201122-en-zh-raring-14.0.7.pet (9 mb)

Plus 2 Chinese language pets each for Margaret64-1.0:
Simplified Chinese:
margaret64-1.0-zhcn-14.0.7.pet (2 mb)

Traditional Chinese:
margaret64-1.0-zhhk-14.0.7.pet (2 mb)

To use:
(a) any 1 of the 3 half-Chinese language pets will enable you to display and input Chinese in Margaret64-1.0

(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pet) or Traditional Chinese (use zhhk pet) desktop menus, icon labels, tooltips for Margaret64-1.0

For more information about the fcitx, scim and yong half-Chinese language pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

icake · Post by **icake** » Sat May 01, 2021 12:04 am

peebee released LxPupSc64 21.04.00T and LxPupSc-21.04+0-T-k64 on Apr 1, 2021 and 21.04.02 on Apr 8, 2021

Main features:
LxPupSc64 21.04.00T and 02: Built from 64-bit Slackware Current components with LXDE desktop
LxPupSc-21.04+0-T-k64 and +2: Built from 32-bit Slackware Current components with LXDE desktop

More information:
LxPupSc64-21.04+0-T and +2: viewtopic.php?f=121&t=167
LxPupSc-21.04+0-T-k64 and +2: viewtopic.php?f=122&t=168

Download iso:
download site for both 64 and 32 bit: https://sourceforge.net/p/lxpup/activit ... 0a838b79c6

LxPupSc64-21.04+0-T iso: https://sourceforge.net/projects/lxpup/ ... o/download
LxPupSc64-21.04+0-T delta to +2: https://sourceforge.net/projects/lxpup/ ... a/download

LxPupSc64-21.04+0-T-k64 iso: https://sourceforge.net/projects/lxpup/ ... o/download
LxPupSc-21.04+0-T-k64 delta to +2: https://sourceforge.net/projects/lxpup/ ... a/download

I have created 3 half-Chinese language pets each for LxPupSc64 21.04.00T; 02T; LxPupSc-21.04+0-T-k64 and +2:
fcitx Chinese input platform:
LxPupSc64-21.04+0-T and +2: fcitx64_4.2.7-en-zh-raring-14.3.6.pet (14 mb)
LxPupSc-21.04+0-T-k64 and +2: fcitx_4.2.７-en-zh-raring-14.0.6.pet (16 mb)

ibus Chinese input platform:
LxPupSc64-21.04+0-T and +2: ibus64_1.5.19-en-zh-raring-14.3.6.pet (34 mb)
LxPupSc-21.04+0-T-k64 and +2: ibus_1.5.17-en-zh-raring-14.0.6.pet (34 mb)

scim Chinese input platform:
scim pets have unresolved issues on both LxPupSc64 21.04.00T and LxPupSc-21.04+0-T-k64

yong Chinese input platform:
LxPupSc64-21.04+0-T and +2: yong3264_20201122-en-zh-raring-14.3.6.pet (9 mb)
LxPupSc-21.04+0-T-k64 and +2: yong3264_20201122-en-zh-raring-14.0.6.pet (9 mb)

Plus 2 Chinese language pets each for LxPupSc64 21.04.00T; 02T; LxPupSc-21.04+0-T-k64 and 2:
Simplified Chinese:
lxpupsc64-21.04.00T-zhcn-14.0.6.pet (2 mb)
lxpupsc64-21.04.02T-zhcn-14.0.6.pet (2 mb)
lxpupsc-21.04.00Tk64-zhcn-14.3.6.pet (2 mb)
lxpupsc-21.04.02Tk64-zhcn-14.3.6.pet (2 mb)

Traditional Chinese:
lxpupsc64-21.04.00T-zhhk-14.0.6.pet (1 mb)
lxpupsc64-21.04.02T-zhhk-14.0.6.pet (1 mb)
lxpupsc-21.04.00Tk64-zhhk-14.3.6.pet (2 mb)
lxpupsc-21.04.02Tk64-zhhk-14.3.6.pet (2 mb)

To use:
(a) any 1 of the 3 half-Chinese language pets will enable you to display and input Chinese in LxPupSc64 21.04.00T; 02T （use 14.0.6 pets）and LxPupSc-21.04+0-T-k64 and +2（use 14.3.6 pets）

(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for LxPupSc64 21.04.00T; 02T and LxPupSc-21.04+0-T-k64 and +2

For more information about the fcitx, ibus and yong half-Chinese language pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

icake · Post by **icake** » Sat May 01, 2021 12:05 am

peebee released scpup64 and scpup version 21.04.00 on April 1, 2021 and 21.04.02 on Apr 8, 2021

more information and discussions:
viewforum.php?f=122

download 64 bit scpup 21.04.00 and 02
https://sourceforge.net/projects/spup/files/ScPup64/
http://distro.ibiblio.org/puppylinux/pu ... -21.04.htm

download 32 bit scpup 21.04.00 and 02:
https://sourceforge.net/projects/spup/files/ScPup/
http://distro.ibiblio.org/puppylinux/pu ... -21.04.htm

I have created 3 half-Chinese language pets each for scpup64 and scpup versions 21.04.00 and 02:
fcitx Chinese input platform:
scpup64: fcitx64_4.2.7-en-zh-raring-14.0.6.pet (14 mb)
scpup: fcitx_4.2.7-en-zh-raring-14.3.6.pet (24 mb)

ibus Chinese input platform:
ibus64: ibus64_1.5.19-en-zh-raring-14.0.6.pet (34 mb)
ibus: ibus_1.5.17-en-zh-raring-14.3.6.pet (34 mb)

scim Chinese input platform:
There are still unresolved issues when scim pets are running in scpup64 and scpup versions 21.04.00 and 02

yong Chinese input platform:
scpup64: yong3264_20201122-en-zh-raring-14.0.6.pet (8 mb)
scpup: yong3264_20201122-en-zh-raring-14.3.6.pet (8 mb)

Plus 2 Chinese language pets each for scpup64 and scpup version 21.04.00 and 02:
Simplified Chinese:
scpup64:
scpup64-21.04.00T-zhcn-14.0.6.pet (2 mb)
scpup64-21.04.02T-zhcn-14.0.6.pet (2 mb)

scpup:
scpup-21.04.00T-zhcn-14.3.6.pet (2 mb)
scpup-21.04.02T-zhcn-14.3.6.pet (2 mb)

Traditional Chinese:
scpup64:
scpup64-21.04.00T-zhhk-14.0.6.pet (1 mb)
scpup64-21.04.02T-zhhk-14.0.6.pet (1 mb)

scpup:
scpup-21.04.00T-zhhk-14.3.6.pet (1 mb)
scpup-21.04.02T-zhhk-14.3.6.pet (1 mb)

To use:
(a) any half-Chinese language pet will enable you to display and input Chinese in scpup64 (please use the 14.0.6 pets) and scpup (please use the 14.3.6 pets) version 21.04.00 and 02;

(b) the 2 name corresponding Chinese language pets will give you Simplified Chinese (use the zhcn pets) or Traditional Chinese (use the zhhk pets) desktop menus, icon labels, tooltips for scpup64 and scpup version 21.04.00 and 02

for more information about the fcitx, ibus and yong pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

icake · Post by **icake** » Sat May 01, 2021 12:06 am

peebee released arch64 20.05.03 and arch32 20.05.03 on Feb 28, 2021 and version 04 on Mar 22, 2021

Main features:
experimental Puppy systems with arch linux favour

More information:
viewtopic.php?f=33&t=56&start=13
viewtopic.php?f=33&t=56&start=20

Download iso:
arch64 20.05.03 and 04: http://www.smokey01.com/peebee/downloads/a64pup/
arch32 20.05.03 and 04: http://www.smokey01.com/peebee/downloads/a32pup/

I have created 3 half-Chinese language pets each for arch64 20.05.03 and 04; arch32 20.05.03 and 04:
fcitx Chinese input platform:
arch64 20.05.03 and 04: fcitx64_4.2.7-en-zh-raring-14.0.6.pet (14 mb)
arch32 20.05.03 and 04: fcitx_4.2.７-en-zh-raring-14.3.7.pet (16 mb)

(I cannot get ibus to run in arch64 20.05.04 or arch32 20.05.04)

scim Chinese input platform:
arch64 20.05.03 and 04: scim64_1.4.14-en-zh-raring-14.0.6.pet (13 mb)
arch32 20.05.03 and 04: scim_1.4.14-en-zh-raring-14.3.7.pet (14 mb)

yong Chinese input platform:
arch64 20.05.03 and 04: yong3264_20201122-en-zh-raring-14.0.6.pet (9 mb)
arch32 20.05.03 and 04: yong3264_20201122-en-zh-raring-14.3.7.pet (9 mb)

Plus 2 Chinese language pets each for arch64 20.05.03 and 4; arch32 20.05.03 and 04:
Simplified Chinese:
arch64:
arch64-20.05.03-zhcn-14.0.6.pet (2 mb)
arch64-20.05.04-zhcn-14.0.6.pet (2 mb)

arch32:
arch32-20.05.03-zhcn-14.3.7.pet (2 mb)
arch32-20.05.04-zhcn-14.3.7.pet (2 mb)

Traditional Chinese:
arch64:
arch64-20.05.03-zhhk-14.0.6.pet (2 mb)
arch64-20.05.04-zhhk-14.0.6.pet (2 mb)

arch32:
arch32-20.05.03-zhhk-14.3.7.pet (1 mb)
arch32-20.05.04-zhhk-14.3.7.pet (1 mb)

To use:
(a) any 1 of the 3 half-Chinese language pets will enable you to display and input Chinese in arch64 20.05.03 and 04 （use 14.0.6 pets） and arch32 20.05.03 and 04 （use 14.3.7 pets）

(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for arch64 20.05.03 and 04; arch32 20.05.03 and 04

For more information about the fcitx, scim and yong half-Chinese language pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

icake · Post by **icake** » Sat May 01, 2021 12:07 am

01micko released slacko64-8.1-pre-pre-per-alpha and 4 bits on Mar 20, 2021

more information and discussions: viewtopic.php?f=118&t=2199&start=47

download slacko64-8.1.iso: https://github.com/puppylinux-woof-CE/w ... eprealpha4

I have created 4 half-Chinese language pets for slacko64-8.1-pre-pre-per-alpha + 4 bits:

fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-21.1.4.pet (17 mb)

ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.1.4.pet (32 mb)

scim Chinese input platform: scim64_1.4.9-en-zh-bionic-21.1.4.pet (13 mb)

yong Chinese input platform: yong3264_20201122-en-zh-bionic-21.1.4.pet (9 mb)

Plus 2 Chinese language pets each for slacko64-8.1-pre-pre-per-alpha + 4 bits:
Simplified Chinese: slacko64-8.1.0-zhcn-21.1.4.pet (2 mb)

Traditional Chinese: slacko64-8.1.0-zhhk-21.1.4.pet (2 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in slacko64-8.1-pre-pre-per-alpha + 4 bits

(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pet) or Traditional Chinese (use zhhk pet) desktop menus, icon labels, tooltips for slacko64-8.1-pre-pre-per-alpha + 4 bits

For more information about the fcitx64, ibus，scim64 and yong half-Chinese language pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

icake · Post by **icake** » Sat May 01, 2021 12:07 am

peebee recently released UPupHH+D-21.04.alpha+5

More information: upupHH: viewtopic.php?f=124&t=472&start=56

download iso: upupHH: https://sourceforge.net/projects/zestyp ... %2B/Alpha/

I have created 4 half-Chinese language pets each for UPupHH+D-21.04.alpha+5:

fcitx Chinese input platform:
UPupHH+D-21.04.alpha+5: fcitx_4.2.7-en-zh-bionic-14.3.6.pet (16 mb)

ibus Chinese input platform:
UPupHH+D-21.04.alpha+5: ibus_1.5.17-en-zh-bionic-14.3.6.pet (28 mb)

scim Chinese input platform:
UPupHH+D-21.04.alpha+5: scim_1.4.14-en-zh-bionic-14.3.6.pet (20 mb)

yong Chinese input platform:
UPupHH+D-21.04.alpha+5: yong3264_20201122-en-zh-bionic-14.3.6.pet (8 mb)

Plus 2 Chinese language pets each for UPupHH+D-21.04.alpha+5:
Simplified Chinese:
upuphhD-21.04.a5-zhcn-14.3.6.pet (2 mb)

Traditional Chinese:
upuphhD-21.04.a5-zhhk-14.3.6.pet (2 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in UPupHH+D-21.04.alpha+5

(b) the name+version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for UPupHH+D-21.04.alpha+5

for more information about the fcitx, ibus, scim and yong pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

icake · Post by **icake** » Sat May 01, 2021 12:08 am

BarryK has recently released EasyOS Dunfell-series 2.6.1(Jan 30, 2021) and 2.6.2(Apr 3, 2021)

more information, annoucement notes and download addresses:
viewtopic.php?f=63&t=2550

I have created 3 half-Chinese language pets each for easydunfell 2.6.1 and 2.6.2:
fcitx Chinese input platform:
fcitx64_4.2.9-en-zh-bionic-21.1.3.pet (17 mb)

ibus cannot run in easydunfell 2.6.1 and 2.6.2

scim Chinese input platform:
scim64_1.4.18-en-zh-bionic-21.1.3.pet (12 mb)

yong Chinese input platform:
yong3264_20201122-en-zh-bionic-21.1.3.pet (8 mb)

Plus 2 Chinese language pets each for easydunfell 2.6.1 and 2.6.2:
Simplified Chinese:
easydunfell-2.6.1-zhcn-21.1.3.pet (4 mb)
easydunfell-2.6.2-zhcn-21.1.3.pet (4 mb)

Traditional Chinese:
easydunfell-2.6.1-zhhk-21.1.3.pet (4 mb)
easydunfell-2.6.2-zhhk-21.1.3.pet (4 mb)

To use:
(a) any 1 of the 3 half-Chinese language pets will enable you to display and input Chinese in easydunfell 2.6.1 and 2.6.2

(b) the 2 name corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for easydunfell 2.6.1 and 2.6.2

more information about the fcitx64, scim64 and yong3264 pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

icake · Post by **icake** » Tue Jun 01, 2021 12:01 am

BarryK has recently released EasyOS Dunfell-series 2.7(Apr 14, 2021); 2.7.1(Apr 20, 2021); 2.7.2(Apr 24, 2021) and 2.7.3(May 5, 2021)

more information, annoucement notes and download addresses:
viewtopic.php?f=63

I have created 4 half-Chinese language pets each for easydunfell 2.7 to 2.7.3:
fcitx Chinese input platform:
fcitx64_4.2.9-en-zh-bionic-21.1.5.pet (14 mb)

ibus Chinese input platform:
ibus64_1.5.19-en-zh-bionic-21.1.5.pet (31 mb)

scim Chinese input platform:
scim64_1.4.18-en-zh-bionic-21.1.5.pet (11 mb)

yong Chinese input platform:
yong3264_20201122-en-zh-bionic-21.1.5.pet (8 mb)

Plus 2 Chinese language pets each for easydunfell 2.7 to 2.7.3:
Simplified Chinese:
easydunfell-2.7.0-zhcn-21.1.5.pet (4 mb)
easydunfell-2.7.1-zhcn-21.1.5.pet (4 mb)
easydunfell-2.7.2-zhcn-21.1.5.pet (4 mb)
easydunfell-2.7.3-zhcn-21.1.5.pet (4 mb)

Traditional Chinese:
easydunfell-2.7.0-zhhk-21.1.5.pet (4 mb)
easydunfell-2.7.1-zhhk-21.1.5.pet (4 mb)
easydunfell-2.7.2-zhhk-21.1.5.pet (4 mb)
easydunfell-2.7.3-zhhk-21.1.5.pet (4 mb)

To use:
(a) any 1 of the 3 half-Chinese language pets will enable you to display and input Chinese in easydunfell 2.7 to 2.7.3

(b) the 2 name corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for easydunfell 2.7 to 2.7.3

more information about the fcitx64, scim64 and yong3264 pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

icake · Post by **icake** » Tue Jun 01, 2021 12:01 am

mistfire has recently released QuickPup 21.02 to 21.04

More information and forum discussions:
QuickPup 21.02.00：viewtopic.php?f=33&t=1743&start=89
QuickPup 21.03.00：viewtopic.php?f=33&t=1743&start=103
QuickPup 21.04.00：viewtopic.php?f=33&t=1743&start=107

Download iso:
QuickPup 21.02.00：https://drive.google.com/file/d/1DZ81zw ... sp=sharing
QuickPup 21.03.00：https://drive.google.com/file/d/1RmNbi9 ... sp=sharing
QuickPup 21.04.00：https://drive.google.com/file/d/1zMgrwG ... sp=sharing

I have created 4 half-Chinese language pets for QuickPup 21.02 to 21.04:

fcitx Chinese input platform:
fcitx_4.2.9-en-zh-bionic-20.1.0a.pet (22 mb)

ibus Chinese input platform:
ibus_1.5.17-en-zh-bionic-20.1.0a.pet (33 mb)

scim Chinese input platform:
scim_1.4.18-en-zh-bionic-20.1.0a.pet (15 mb)

yong Chinese input platform:
yong3264_20201122-en-zh-bionic-20.1.0a.pet (8 mb)

Plus 2 Chinese language pets each for QuickPup 21.02 to 21.04:
Simplified Chinese:
quickpup-21.02.00-zhcn-20.1.0a.pet (2 mb)
quickpup-21.03.00-zhcn-20.1.0a.pet (2 mb)
quickpup-21.04.00-zhcn-20.1.0a.pet (2 mb)

Traditional Chinese:
quickpup-21.02.00-zhhk-20.1.0a.pet (2 mb)
quickpup-21.03.00-zhhk-20.1.0a.pet (2 mb)
quickpup-21.04.00-zhhk-20.1.0a.pet (2 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in QuickPup 21.02 to 21.04

(b) the name corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for QuickPup 21.02 to 21.04

for more information about the fcitx, ibus, scim and yong half-Chinese pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

icake · Post by **icake** » Tue Jun 01, 2021 12:03 am

josejp2424 released DpupBullseye-9.7.0-beta1-260421 on Apr 26, 2021

more information:
https://sourceforge.net/projects/dpup/f ... llseye/64/

download DpupBullseye64-9.7.0-beta1-260421.iso:
https://sourceforge.net/p/dpup/activity ... b84b66ec4b

I have created 4 half-Chinese language pets for DpupBullseye-9.7.0-beta1-260421:

fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-21.0.0b.pet (15 mb)

ibus Chinese input platform: ibus64_1.5.17-en-zh-bionic-21.0.0b.pet (25 mb)

scim Chinese input platform: scim64_1.4.18-en-zh-bionic-21.0.0b.pet (12 mb)

yong Chinese input platform: yong3264_20201122-en-zh-bionic-21.0.0b.pet (8 mb)

Plus 2 Chinese language pets each for DpupBullseye-9.7.0-beta1-260421:

Simplified Chinese: dpupbullseye64-9.7.0b1260421-zhcn-21.0.0b.pet (3 mb)

Traditional Chinese: dpupbullseye64-9.7.0b1260421-zhhk-21.0.0b.pet (3 mb)

To use:

(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in DpupBullseye-9.7.0-beta1-260421

(b) the name+version corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for DpupBullseye-9.7.0-beta1-260421

for more information about the fcitx64, ibus64, scim64 and yong3264 pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders.

icake · Post by **icake** » Tue Jun 01, 2021 12:04 am

peebee recently released UPupHH+D-21.04.01 on May 6, 2021

More information: upupHH: viewtopic.php?f=124&t=472&start=56

download iso: upupHH: https://sourceforge.net/projects/zestyp ... irsute%2B/

I have created 4 half-Chinese language pets each for UPupHH+D-21.04.01:

fcitx Chinese input platform:
UPupHH+D-21.04.01: fcitx_4.2.7-en-zh-bionic-14.3.6.pet (16 mb)

ibus Chinese input platform:
UPupHH+D-21.04.01: ibus_1.5.17-en-zh-bionic-14.3.6.pet (28 mb)

scim Chinese input platform:
UPupHH+D-21.04.01: scim_1.4.14-en-zh-bionic-14.3.6.pet (20 mb)

yong Chinese input platform:
UPupHH+D-21.04.01: yong3264_20201122-en-zh-bionic-14.3.6.pet (8 mb)

Plus 2 Chinese language pets each for UPupFF+D-20.12+4 and UPupHH+D-21.04.01:
Simplified Chinese:
upuphhD-21.04.01-zhcn-14.3.6.pet (2 mb)

Traditional Chinese:
upuphhD-21.04.01-zhhk-14.3.6.pet (2 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in UPupHH+D-21.04.01

(b) the name+version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for UPupHH+D-21.04.01

for more information about the fcitx, ibus, scim and yong pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

icake · Post by **icake** » Tue Jun 01, 2021 12:05 am

01micko released slacko64-8.2-alpha-alpha-beta on May 9, 2021

more information and discussions: viewtopic.php?f=118&t=2893

download slacko64-8.2.iso: http://01micko.com/woof-output-slacko64 ... 64-8.2.iso

I have created 4 half-Chinese language pets for slacko64-8.2:

fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-21.1.4.pet (17 mb)

ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.1.4.pet (32 mb)

scim Chinese input platform: scim64_1.4.9-en-zh-bionic-21.1.4.pet (13 mb)

yong Chinese input platform: yong3264_20201122-en-zh-bionic-21.1.4.pet (9 mb)

Plus 2 Chinese language pets each for slacko64-8.2:
Simplified Chinese: slacko64-8.2.0-zhcn-21.1.4.pet (2 mb)

Traditional Chinese: slacko64-8.2.0-zhhk-21.1.4.pet (2 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in slacko64-8.2

(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pet) or Traditional Chinese (use zhhk pet) desktop menus, icon labels, tooltips for slacko64-8.2

For more information about the fcitx64, ibus，scim64 and yong half-Chinese language pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

icake · Post by **icake** » Thu Jul 01, 2021 12:00 am

8Geee released AtomicPup2021 on May 8, 2021

More information:
viewtopic.php?f=33&t=2889
https://archive.org/details/atomic-pup-family

Download AtomicPup2021.iso: https://archive.org/download/atomic-pup ... up2021.iso

I have created 6 half-Chinese language pets for atomicpup 2021:
fcitx Chinese input platform:
fcitx_4.2.7-en-zh-precise-12.2.0.pet (24.6 mb)

(ibus cannot run in atomicpup 2021)

scim Chinese input platform:
scim_1.4.9-en-zh-precise-12.2.0.pet (22.1 mb)

yong Chinese input platform:
yong3264_4.2.0-en-zh-precise-12.2.0.pet (8.6 mb)
yong3264_th_2016.11.5-en-zh-precise-12.2.0.pet (7.9 mb)
yong3264_thjj_2016.7.29-en-zh-precise-12.2.0.pet (8.4 mb)
yong3264_thth_2014.8.5-en-zh-precise-12.2.0.pet (9.5 mb)

Plus 2 Chinese language pets for atomicpup 2021:
Simplified Chinese:
atomicpup-2021-zhcn-12.2.0.pet (2.2 mb)

Traditional Chinese:
atomicpup-2021-zhhk-12.2.0.pet (1.7 mb)

To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in atomicpup 2021

(b) the version corresponding Chinese language pets will give you Simplified Chinese (use the zhcn pet) or Traditional Chinese (use the zhcn pet) desktop menus, icon labels, tooltips for atomicpup 2021. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese fonts and Chinese input platform. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

for more information about the fcitx, scim and yong pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

icake · Post by **icake** » Thu Jul 01, 2021 12:01 am

peebee recently released LxPupSc64-21.04+3-T-k64.iso (May 28, 2021) and LxPupSc-21.04+3-T-k64.iso (Jun 1, 2021)

Main features:
LxPupSc64-21.04+3-T: Built from 64-bit Slackware Current components with LXDE desktop
LxPupSc-21.04+3-T-k64: Built from 32-bit Slackware Current components with LXDE desktop

More information:
LxPupSc64-21.04+3-T: viewtopic.php?f=121&t=167
LxPupSc-21.04+3-T-k64: viewtopic.php?f=122&t=168

Download LxPupSc64-21.04+3-T.iso and LxPupSc-21.04+3-T-k64.iso:
https://sourceforge.net/p/lxpup/activit ... 0a838b79c6

LxPupSc64-21.04+0-T iso: https://sourceforge.net/projects/lxpup/ ... o/download
LxPupSc64-21.04+0-T delta to +3: https://sourceforge.net/projects/lxpup/ ... a/download

LxPupSc-21.04+0-T-k64 iso: https://sourceforge.net/projects/lxpup/ ... o/download
LxPupSc-21.04+0-T-k64 delta to +3: https://sourceforge.net/projects/lxpup/ ... a/download

I have created 4 half-Chinese language pets each for LxPupSc64-21.04+3-T and LxPupSc-21.04+3T-k64:
fcitx Chinese input platform:
LxPupSc64-21.04+3-T: fcitx64_4.2.7-en-zh-bionic-21.1.6.pet (17 mb)
LxPupSc-21.04+3-T-k64: fcitx_4.2.７-en-zh-raring-14.3.6a.pet (15 mb)

ibus Chinese input platform:
LxPupSc64-21.04+3-T: ibus64_1.5.19-en-zh-bionic-21.1.6.pet (34 mb)
LxPupSc-21.04+3-T-k64: ibus_1.5.17-en-zh-raring-14.3.6a.pet (34 mb)

scim Chinese input platform:
LxPupSc64-21.04+3-T: scim64_1.4.14-en-zh-bionic-21.1.6.pet (16 mb)
LxPupSc-21.04+3-T-k64: scim_1.4.14-en-zh-raring-14.3.6a.pet (14 mb)

yong Chinese input platform:
LxPupSc64-21.04+3-T: yong3264_20201122-en-zh-bionic-21.1.6.pet (8 mb)
LxPupSc-21.04+3-T-k64: yong3264_20201122-en-zh-raring-14.3.6a.pet (8 mb)

Plus 2 Chinese language pets each for LxPupSc64-21.04+3-T and LxPupSc-21.04+3-T-k64:
Simplified Chinese:
lxpupsc64-21.04.03T-zhcn-21.1.6.pet (2 mb)
lxpupsc-21.04.03Tk64-zhcn-14.3.6a.pet (3 mb)

Traditional Chinese:
lxpupsc64-21.04.03T-zhhk-21.1.6.pet (3 mb)
lxpupsc-21.04.03Tk64-zhhk-14.3.6a.pet (3 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in LxPupSc64 21.04.03 （use 21.1.6 pets）and LxPupSc-21.04+3-T-k64（use 14.3.6a pets）

(b) the name/version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for LxPupSc64-21.04+3-T and LxPupSc-21.04+3-T-k64. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

For more information about the fcitx, ibus, scim and yong half-Chinese language pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

icake · Post by **icake** » Thu Jul 01, 2021 12:02 am

darry19662018 released Hirsuite Light with Slitaz and Tinycore apps on May 13, 2021

more information and discussions: viewtopic.php?f=119&t=2931

download "Hirsuite 21_04 - with Slitaz and Tinycore appsk3.14.56retro.iso":
https://archive.org/download/hirsuite-l ... 6retro.iso

I have created 4 half-Chinese language pets each for hirsuite 21.04.00:

fcitx Chinese input platform: fcitx_4.2.7-en-zh-bionic-14.3.6.pet (16 mb)

ibus Chinese input platform: ibus_1.5.17-en-zh-bionic-14.3.6.pet (28 mb)

scim Chinese input platform: scim_1.4.14-en-zh-bionic-14.3.6.pet (20 mb)

yong Chinese input platform: yong3264_20201122-en-zh-bionic-14.3.6.pet (8 mb)

Plus 2 Chinese language pets each for hirsuite 21.04.00:

Simplified Chinese: hirsuite-21.04.00-zhcn-14.3.6.pet (2 mb)

Traditional Chinese: hirsuite-21.04.00-zhhk-14.3.6.pet (2 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in hirsuite 21.04.00

(b) the name+version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for hirsuite 21.04.00. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

for more information about the fcitx, ibus, scim and yong pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

icake · Post by **icake** » Thu Jul 01, 2021 12:03 am

peebee recently released UPupHH+D-21.04.02 on May 14, 2021; UPupHH+D-21.04.03 on May 23, 2021 and UPupHH+D-21.04.04 on Jun 4, 2021

More information: viewtopic.php?f=144&t=2736

download:
delta to 2, 3 and 4 from 00 iso: https://sourceforge.net/projects/zestyp ... B/updates/
UpupHH+D-21.04+2.iso, UpupHH+D-21.04+3.iso and UpupHH+D-21.04+4.iso: https://sourceforge.net/projects/zestyp ... irsute%2B/

I have created 4 half-Chinese language pets each for UPupHH+D-21.04.02 to 04:

fcitx Chinese input platform: fcitx_4.2.7-en-zh-bionic-14.3.6.pet (16 mb)

ibus Chinese input platform: ibus_1.5.17-en-zh-bionic-14.3.6.pet (28 mb)

scim Chinese input platform: scim_1.4.14-en-zh-bionic-14.3.6.pet (20 mb)

yong Chinese input platform: yong3264_20201122-en-zh-bionic-14.3.6.pet (8 mb)

Plus 2 Chinese language pets each for UPupHH+D-21.04+2 to 04:
Simplified Chinese:
upuphhD-21.04.02-zhcn-14.3.6.pet (2 mb)
upuphhD-21.04.03-zhcn-14.3.6.pet (2 mb)
upuphhD-21.04.04-zhcn-14.3.6.pet (2 mb)

Traditional Chinese:
upuphhD-21.04.02-zhhk-14.3.6.pet (2 mb)
upuphhD-21.04.03-zhhk-14.3.6.pet (2 mb)
upuphhD-21.04.04-zhhk-14.3.6.pet (2 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in UPupHH+D-21.04.02 to 04

(b) the name+version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for UPupHH+D-21.04.02 to 04. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

for more information about the fcitx, ibus, scim and yong pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

icake · Post by **icake** » Thu Jul 01, 2021 12:04 am

peebee recently released UPupFF+D-20.12+5 on May 14, 2021 and UPupFF+D-20.12+6 on Jun 4, 2021

More information:
viewtopic.php?f=144&t=405
viewtopic.php?f=144&t=405&start=51

download iso:
upupFF update to +5 and +6:
http://distro.ibiblio.org/puppylinux/pu ... -20.12.htm
https://sourceforge.net/projects/zestyp ... B/updates/

UPupFF+D-20.12+5.iso and UPupFF+D-20.12+6.iso: https://sourceforge.net/projects/zestyp ... -Focal%2B/

I have created 4 half-Chinese language pets each for UPupFF+D-20.12+5 and +6:

fcitx Chinese input platform: fcitx_4.2.9-en-zh-bionic-20.0.0s.pet (16 mb)

ibus Chinese input platform: ibus_1.5.17-en-zh-bionic-20.0.0s.pet (28 mb)

scim Chinese input platform: scim_1.4.14-en-zh-bionic-20.0.0s.pet (20 mb)

yong Chinese input platform: yong3264_20201122-en-zh-bionic-20.0.0s.pet (8 mb)

Plus 2 Chinese language pets for UPupFF+D-20.12+5 and +6:
Simplified Chinese:
upupffD-20.12.05-zhcn-20.0.0s.pet (2 mb)
upupffD-20.12.06-zhcn-20.0.0s.pet (2 mb)

Traditional Chinese:
upupffD-20.12.05-zhhk-20.0.0s.pet (2 mb)
upupffD-20.12.06-zhhk-20.0.0s.pet (2 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in UPupFF+D-20.12+5 and +6

(b) the name+version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for UPupFF+D-20.12+5 and +6. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

for more information about the fcitx, ibus, scim and yong pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

icake · Post by **icake** » Thu Jul 01, 2021 12:05 am

peebee released LxPupFocal32-21.02+5 on May 15, 2021

More information and download LxPupFocal32-21.02+5.iso: https://sourceforge.net/projects/lxpup/ ... xPup21.02/

I have created 4 half-Chinese language pets each for LxPupFocal32-21.02+5

fcitx Chinese input platform: fcitx_4.2.7-en-zh-bionic-14.3.6.pet (16 mb)

ibus Chinese input platform: ibus_1.5.17-en-zh-bionic-14.3.6.pet (28 mb)

scim Chinese input platform: scim_1.4.14-en-zh-bionic-14.3.6.pet (20 mb)

yong Chinese input platform: yong3264_20201122-en-zh-bionic-14.3.6.pet (8 mb)

Plus 2 Chinese language pets for LxPupFocal32-21.02+5:

Simplified Chinese: lxpupffD-21.02.05-zhcn-14.3.6.pet (2 mb)

Traditional Chinese: lxpupffD-21.02.05-zhhk-14.3.6.pet (2 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in LxPupFocal32-21.02+5

(b) the name+version corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for LxPupFocal32-21.02+5. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

for more information about the fcitx, ibus, scim and yong pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

icake · Post by **icake** » Thu Jul 01, 2021 12:06 am

josejp2424 released amd64 devuanpup64-9.7.0-20210523 on May 24, 2021 and 9.7.0-20210613 on Jun 13, 2021

for more information and discussions:
viewtopic.php?f=112&t=3028
viewtopic.php?f=33&t=3083

download iso:
devuanpup-9.7.0-chimaera_4.0.alpha-20210523_amd64.iso: https://sourceforge.net/p/devuanpup/act ... 3b2d4bbe26
devuanpup-9.7.0-chimaera_4.0.beta1-20210613_amd64.iso: https://sourceforge.net/projects/devuan ... _amd64.iso

I have created 4 half-Chinese language pets for amd64 devuanpup64-9.7.0-20210523 and 9.7.0-20210613:

fcitx Chinese input platform: fcitx64_4.2.9-en-zh-bionic-21.0.0b.pet (14 mb)

ibus Chinese input platform: ibus64_1.5.19-en-zh-bionic-21.0.0b.pet (24 mb)

scim Chinese input platform: scim64_1.4.18-en-zh-bionic-21.0.0b.pet (12 mb)

yong Chinese input platform: yong3264_20201122-en-zh-bionic-21.0.0b.pet (8 mb)

Plus 2 Chinese language pets each for amd64 devuanpup64-9.7.0-20210523 and 9.7.0-20210613:
Simplified Chinese:
devuanpup64-9.7.020210523-zhcn-21.0.0b.pet (4 mb)
devuanpup64-9.7.020210613-zhcn-21.0.0b.pet (4 mb)

Traditional Chinese:
devuanpup64-9.7.020210523-zhhk-21.0.0b.pet (3 mb)
devuanpup64-9.7.020210613-zhhk-21.0.0b.pet (3 mb)

To use:
(a) any 1 of the 4 half-Chinese language pets will enable you to display and input Chinese in amd64 devuanpup64-9.7.0-20210523 and 9.7.0-20210613

(b) the name+version corresponding Chinese language pets will give you Simplified Chinese (zhcn pet) or Traditional Chinese (zhhk pet) menus, icon labels, tooltips for amd64 devuanpup64-9.7.0-20210523 and 9.7.0-20210613. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

for more information about the fcitx, ibus, scim and yong pets, please see the first posting of this subject

Download addresses for these half-Chinese and Chinese language pets are also available in the first posting of this subject.

icake · Post by **icake** » Thu Jul 01, 2021 12:06 am

josejp24224 released i386 devuanpup 9.7.0 20210529 on May 30, 2021 and 9.7.0 20210610 on Jun 10, 2021

More information and forum discussions:
viewtopic.php?f=112&t=3028
viewtopic.php?f=33&t=3083

Download iso:
devuanpup-9.7.0-chimaera_4.0alpha-3-20210529_i386.iso: https://sourceforge.net/p/devuanpup/act ... 8747c708dd
devuanpup-9.7.0-chimaera_4.0beta1-20210610_i386.iso: https://sourceforge.net/projects/devuan ... 0_i386.iso

I have created 3 half-Chinese language pets for i386 devuanpup 9.7.0 20210529 and 9.7.0 20210610:

fcitx Chinese input platform:
fcitx_4.2.7-en-zh-bionic-20.0.0a.pet (18 mb)

ibus Chinese input platform:
ibus has unresolved issues running in i386 devuanpup 9.7.0 20210529 and 9.7.0 20210610

scim Chinese input platform:
scim_1.4.14-en-zh-bionic-20.0.0a.pet (12 mb)

yong Chinese input platform:
yong3264_20201122-en-zh-bionic-20.0.0a.pet (8 mb)

Plus 2 Chinese language pets each for i386 devuanpup 9.7.0 20210529 and 9.7.0 20210610:
Simplified Chinese:
devuanpup-9.7.020210529-zhcn-20.0.0a.pet (3 mb)
devuanpup-9.7.020210610-zhcn-20.0.0a.pet (3 mb)

Traditional Chinese:
devuanpup-9.7.020210529-zhhk-20.0.0a.pet (3 mb)
devuanpup-9.7.020210610-zhhk-20.0.0a.pet (3 mb)

To use:
(a) any 1 of the 3 half-Chinese language pets will enable you to display and input Chinese in i386 devuanpup 9.7.0 20210529 and 9.7.0 20210610

(b) the name corresponding Chinese language pets will give you Simplified Chinese (use zhcn pets) or Traditional Chinese (use zhhk pets) desktop menus, icon labels, tooltips for i386 devuanpup 9.7.0 20210529 and 9.7.0 20210610. Please note that all Chinese language pets rely on a suitable half-Chinese language pet already installed to the system to provide Chinese input platform and Chinese fonts. Otherwise the system cannot input Chinese and display Chinese (shown as squares).

for more information about the fcitx, scim and yong half-Chinese pets, please see the first posting of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting of this subject for download addresses.

Puppy Linux Discussion Forum

icake Chinese language pets

Chinese language pets for chimaerapup 10.2.1-6-Lite (64/32), bullseyepup-10.2.1-6-Lite (64/32)

Chinese language pets for BionicPup32 8.0.26

Chinese language pets for arch64 20.05.03 and arch32 20.05.03

Chinese language pets for LxPupFocal32-21.02+4

Chinese language pets for UPupFF+D-20.12+4 and UPupHH+D-21.04.alpha+2

Chinese language pets for LxPupBionic32-19.03+26.iso

Re: icake Chinese language pets

icake Chinese language pets for QuickPup 20.06.7 to 21.01.0

icake Chinese language pets for slacko 5.7.0 PQ3 K.3.10.32 Eng/Hun CD, precise 5.5 retro and precis indian summee 5.5r

icake Chinese language pets for jackalpup 0.0 full and slim

icake Chinese language pets for Margaret64-1.0

icake Chinese language pets for LxPupSc64 21.04.00T; 02T; LxPupSc-21.04+0-T-k64 and +2

icake Chinese language pets for scpup64 and scpup versions 21.04.00 and 02

icake Chinese language pets for arch64 20.05.03 and 04; arch32 20.05.03 and 04

icake Chinese language pets for slacko64-8.1-pre-pre-per-alpha + 4 bits

icake Chinese language pets for UPupHH+D-21.04.alpha+5

icake Chinese language pets for easydunfell 2.6.1 and 2.6.2

icake Chinese language pets easydunfell 2.7 to 2.7.3

icake Chinese language pets QuickPup 21.02 to 21.04

icake Chinese language pets DpupBullseye-9.7.0-beta1-260421

icake Chinese language pets UPupHH+D-21.04.01

icake Chinese language pets slacko64-8.2-alpha-alpha-beta

icake Chinese language pets for AtomicPup2021

icake Chinese language pets for peebee recently released LxPupSc64-21.04+3-T-k64.iso (May 28, 2021) and LxPupSc-21.04+3-

icake Chinese language pets for hirsuite 21.04.00

icake Chinese language pets for UPupHH+D-21.04.02 to 04

icake Chinese language pets for UPupFF+D-20.12+5 and +6

icake Chinese language pets for LxPupFocal32-21.02+5

icake Chinese language pets for amd64 devuanpup64-9.7.0-20210523 and 9.7.0-20210613

icake Chinese language pets for i386 devuanpup 9.7.0 20210529 and 9.7.0 20210610