How to combine fossapup + webcam + motn detect +vrec?

[boof]

need software to monitor via desktop #3 w auto[?] record. advice pls

camera is star xxxxx Venus USB2

MOTION

/etc/motion/motion.conf

no pic, why pls?

# This config file was generated by motion 4.2.2
# Documentation: /usr/share/doc/motion/motion_guide.html
#
# This file contains only the basic configuration options to get a
# system working. There are many more options available. Please
# consult the documentation for the complete list of all options.
#

############################################################
# System control configuration parameters
############################################################

# Start in daemon (background) mode and release terminal.
daemon on

# Start in Setup-Mode, daemon disabled.
setup_mode off

# File to store the process ID.
pid_file value /var/run/moton/mgion.pid

# File to write logs messages into. If not defined stderr and syslog is used.
log_file /var/log/motion/motion.log

# Level of log messages [1..9] (EMG, ALR, CRT, ERR, WRN, NTC, INF, DBG, ALL).
log_level 6

# Target directory for pictures, snapshots and movies
target_dir /var/lib/motion

#define source
input -1 #Webcam

# Video device (e.g. /dev/video0) to be used for capturing.
videodevice /dev/video1

# Parameters to control video device. See motion_guide.html
; vid_control_params value

# The full URL of the network camera stream.
; netcam_url value

# Name of mmal camera (e.g. vc.ril.camera for pi camera).
; mmalcam_name value

# Camera control parameters (see raspivid/raspistill tool documentation)
; mmalcam_control_params value ????????????????????????

############################################################
# Image Processing configuration parameters
############################################################

# Image width in pixels.
width 640

# Image height in pixels.
height 480

# Maximum number of frames to be captured per second.
framerate 15

# Text to be overlayed in the lower left corner of images
text_left CAMERA1

# Text to be overlayed in the lower right corner of images.
text_right %Y-%m-%d\n%T-%q

############################################################
# Motion detection configuration parameters
############################################################

# Always save pictures and movies even if there was no motion.
emulate_motion on

# Threshold for number of changed pixels that triggers motion.
threshold 500

# Noise threshold for the motion detection.
; noise_level 32

# Despeckle the image using (E/e)rode or (D/d)ilate or (l)abel.
despeckle_filter EedDl

# Number of images that must contain motion to trigger an event.
minimum_motion_frames 1

# Gap in seconds of no motion detected that triggers the end of an event.
event_gap 60

# The number of pre-captured (buffered) pictures from before motion.
pre_capture 3

# Number of frames to capture after motion is no longer detected.
post_capture 0

############################################################
# Script execution configuration parameters
############################################################

# Command to be executed when an event starts.
; on_event_start value

# Command to be executed when an event ends.
; on_event_end value

# Command to be executed when a movie file is closed.
; on_movie_end value

############################################################
# Picture output configuration parameters
############################################################

# Output pictures when motion is detected
picture_output off

# File name(without extension) for pictures relative to target directory
picture_filename %Y%m%d%H%M%S-%q

############################################################
# Movie output configuration parameters
############################################################

# Create movies of motion events.
movie_output on

# Maximum length of movie in seconds.
movie_max_time 60

# The encoding quality of the movie. (0=use bitrate. 1=worst quality, 100=best)
movie_quality 45

# Container/Codec to used for the movie. See motion_guide.html
movie_codec mkv

# File name(without extension) for movies relative to target directory
movie_filename %t-%v-%Y%m%d%H%M%S

############################################################
# Webcontrol configuration parameters
############################################################

# Port number used for the webcontrol.
webcontrol_port 8080

# Restrict webcontrol connections to the localhost.
webcontrol_localhost on

# Type of configuration options to allow via the webcontrol.
webcontrol_parms 0

############################################################
# Live stream configuration parameters
############################################################

# The port number for the live stream.
stream_port 8081

# Restrict stream connections to the localhost.
stream_localhost on

##############################################################
# Camera config files - One for each camera.
##############################################################
camera /etc/motion/camera1.conf
; camera /etc/motion/camera2.conf
; camera /etc/motion/camera3.conf
; camera /etc/motion/camera4.conf

##############################################################

camera1.confg ={}

console output

root# motion
[0:motion] [NTC] [ALL] conf_load: Processing thread 0 - config file /etc/motion/motion.conf
[0:motion] [NTC] [ALL] config_camera: Processing camera config file /etc/motion/camera1.conf
[0:motion] [NTC] [ALL] motion_startup: Logging to file (/var/log/motion/motion.log)
root#

# Directory to read '.conf' files for cameras.
##############################################################
; camera_dir /etc/motion/conf.d

[rockedge]

Ever consider using ZoneMinder?

[peppyy]

Ever consider using ZoneMinder?

I am about there with this HIKVision camera. I was thinking about trying this https://www.hikvision.com/europe/suppor ... x-64-bit-/

I did have an old laptop with ME on it and it works with addons.

What ZM runs on Fossa64?

[mikewalsh]

@boof :-

Rockedge is probably on the money with that suggestion. And if anybody knows how it works, he most assuredly does.....

Or, you could take a look at Xeoma. Easy-to-use, the free version lets you run up to 4 cameras....and motion detection comes built-in, OOTB.

Downloads here:-

https://felenasoft.com/xeoma/en/download/

It's basically an all-in-one 'binary', which can be run as a 'portable' app from anywhere. Unzip the download, and put the executable 'binary' anywhere you want.

Mike.

[boof]

usb camera failed-no o/p. v annoyed. lappy camera detected and working. can't aim at carport, so not useful. usb camera severa yrs old, but almost no use. failed after a few hrs const power, unless usb 's timing out ? xoma shows split screen for 2 cameras, but says no output #2, has no camera settings for it. /dev/video1 exists but maybe pre-fail. will delete and reboot to see if restored?

[boof]

restored video1, but second usb camera wrong make/model. it is a Sun Microelectrnics Venus USB 2.0, not shown in lsusb. 2 cameras in lsusb appear to be lappy int camera?

Screenshot(1).jpg (160.45 KiB) Viewed 1468 times

edit:
cam is in use by other app or filter chain?

[boof]

Xeoma working fine thks. watching video stream from web at same time a bit too much for my celeron based processor, but all good enuf. the movement sampling window flashes quickly, but fair enough. will pay fee soon.

[rockedge]

Xeoma is certainly an option in this case and although zoneminder would perform better on this particular machine Xeoma is much easier to get going and should do perfectly fine.

I haven't explored it as of late so I went ahead and downloaded the latest version and will be testing it out today. It does appear to work on a broad range of Puppy's and the free version should suffice for many use cases. One advantage zoneminder has regardless of it's complexity is the fact there are no fees and the software is free and free to use with 1 camera or a 1000+

[peppyy]

Just tried Xeoma for linux on fossa64. Extracted to my applications, renamed to xeoma_free.app and it runs fine. Found my camera automatically.
I did find the interface a bit counter-intuitive being iconized however it has pretty good built in help in the tool tips.

The stream uses a lot more cpu and bandwidth than MPV and doesn't run as smoothly as just rstp connection.
It also appears to record on launch but that is most likely because I haven't played with it much yet.

[mikewalsh]

@peppyy :-

I only suggested Xeoma as an easy-to-use option; I initially discovered it when rockedge first began putting his ZoneMinder Puppies together, a few years back. I was interested enough that I began looking around for similar apps that would work with Puppy....and found Xeoma. Even then, I was impressed by the fact it was a single executable binary.....which just seemed to work in every Puppy I threw it at, 32- and 64-bit alike.

It's quite greedy with resources compared to some, I suppose, but you can't deny it's easy-to-use!

You CAN turn recording off, though it's a bit fiddly to find the option. (Those icons are NOT that 'intuitive', unfortunately.) Ya gotta "dig" a bit, I'm afraid..!

For a freebie, it's quite impressive, considering just how many options Felenasoft have managed to pack into it.....

Mike.

[peppyy]

@mikewalsh I find it interesting that reading and searching the Xeoma manual, I can't find a way to have it record only motion triggered events. I was hoping to use it to detect swarms of bees on my swarm trap and record just that, and unauthorized visitors, rather than constant recording.

I know that the camera itself has that ability however in order to set them on the camera requires an operating system with web controls that I haven't run in years. The other issue with the camera is that it doesn't seem to recognize the Linux file system directly, even when I manually try to enter the path. (Of course that is controlled by the software interface).

Might have to set up one of my spare comps dedicated for Zoneminder.

[rockedge]

With zoneminder one of the main features is reflected in the name....Zones. You can create zones in the camera field of vision that do different things with variable sensitivity and purpose. With different zone types and then the filter system one can pin point certain events.

I wrote a script for someone who lives on a ranch in a remote corner of the world and they needed to detect NO motion over a period of time. Meaning they had an extremely important sump pump that a camera looked at directly. If the pump was functioning correctly it turned on once or twice maybe more every 30 minutes. If there was NO movement and zoneminder's motion detection did not activate as it should periodically, ZoneMinder threw and alarm event and sent an email and push notifications to their mobile devices warning of a possible pump failure. As ZM development went on I think now it is possible to measure the time between motion detection events to determine if there are zero events over that time. In principle added a zero event warning which is exactly the opposite of what you need.

There are many settings to vary the degree of accuracy and if I help you we just might be able to use object recognition to tell if the swarm are bees or not......crazy might be using face detection to identify individual bees... for fun I use a camera at my cat's feeding area and face recognition to identify which cat is hanging around by name. Just have several photos of each cat and place them in the right directory and off we go.....but that is total overkill for what I really need and is just for fun.

I am confident that you can get ZM to detect bees swarming and send you notification that it's happening.

Screenshot(101).png (374.06 KiB) Viewed 1314 times

Screenshot(102).png (71.42 KiB) Viewed 1311 times

[peppyy]

@rockedge So what is the best way to install Zoneminder in a frugal fossa 64? Do I use the zoneminder_1.34.26-focal2_amd64.deb (6.5 MiB) and then look for missing libraries? I am guessing that would be the correct one for an AMD Fx-6300 Six-Core Processor.

[rockedge]

First you need the web server, PHP, mysql (mariadb) installed. This will save you from too much stress. The version you have chosen will be fine for Fossapup64 and is a stable release I think. You can get my scripts and look through those, and you can use them as a guide if you want to be more hands on. Another option is just run the scripts and see how it goes.
Once you have the LAMP stack up and running then click on the ZM .deb file. You will need to also create the database and initialize it. I like to use phpmyadmin for this after I do the database .SQL import of the ZM structure. The script does this for you but a manual approach will let you know how it all works on another level. This all may sound daunting but it is really not too bad. In my script I use Hiawatha (LHMP) as the web server but Apache is more the standard LAMP and is also pretty easy to get going and ZM is more or less developed with Apache as the default web server.
Will you be trying it out today?

Also later on you can look into using zmNinja https://pliablepixels.github.io/ alongside of zoneminder.

[peppyy]

@rockedge It appears that somehow I broke the PPM in fossa64 since I cant retrieve any info about dependencies or deps from any of the sources. It simply sits there for ever without updating.

It says I already have mysql client installed. (See screenshots).

I am just in to strange a place tonight to figure it all out
I thank you for all your help but I should probably try again tomorrow.

[rockedge]

@peppyy that's fine. Perhaps we can go step by step tomorrow, to get ZM going.

You will need Apache (maybe we will go Hiawatha)
from the PPM we will grab mariaDB by searching for mariadb-server, this database server is a MySQL swap in and in some ways superior. Otherwise you will need mysql-server from the PPM.

We will go over it all later when you are ready

And by the way the dev's over at the ZoneMinder project are interested in what you're doing and would like to include an article in the ZoneMinder Blog. Perhaps if we get it going well enough!

[peppyy]

@rockedge Installed mariadb-server which said it was missing was libatm.so.1
which I can't see any need ATM asynchronous transfer mode.
I have not yet installed PHP , I can if I need that too.

From what I have read, zmNinja is for mobile clients, (which I do not have any of). I might have missed something there.

[rockedge]

PHP 7 is needed for sure. zmNinja also has a desktop version as an app image that I like to use instead of a browser and the ZM web console at times. It is a bell and whistle in your case though

I just remembered I had some troubles getting mariaDB installed on Fossa64 and switched to the mysql-server. I'll have to try that out again later.

This is the list of the PHP lib's to add. The Fossa64 versions will be different more like php 7.4 but you will get the idea

Code: Select all

# install PHP
pkg add php-cgi_7.2 php-curl php-gd php-mysql php-dev_7.2
pkg add mime-support php-common php7.2-cli php7.2-common php7.2-dev php7.2-json php7.2-opcache  php7.2-readline shtool
pkg add php-xml
pkg add php-memcache_3.0.9 php-mbstring
pkg add libjs-mootools_1.4.5
pkg add libmp4v2 libvlc
pkg add php7.2-soap php7.2-bcmath php7.2-bz2

You can use the PPM to achieve the same

[rockedge]

Start with Apache and enable the configs and modules. Then add PHP and test in a browser with a small php script in the web root

info.php

Code: Select all

<?php
 phpinfo();
?>

call it up in a browser something like http://localhost/info.php

[peppyy]

Okay, I think I have everything installed so far.

Start with Apache and enable the configs and modules. Then add PHP and test in a browser with a small php script in the web root

info.php

I have no experience with Apache at all. To tell the truth I have never heard of a location called web root. I have worked with a few simple scrips before but it has been a while.
Here is what I installed from PPM, some was already installed.

[rockedge]

in a terminal create a new user named www-data

Code: Select all

adduser www-data

Starting to look good...open a terminal and type apache2ctl start we should see errors.

the web root with apache is /var/www/html usually. All of the Apache mods and configs are in /etc/apache2

once we see errors on the attempted start we can enable the needed Apache configs and modules. Once you see how it's done you will be off to the races in that respect

Also Fossapup64 has a Hiawatha web server installed already, this is a very good web server as well and at some point I will guide you in setting that up to run ZM as well. Hiawatha's web root is /root/Web-Server which belongs to the user webuser:webgroup already built in.

With both web servers the web root can be configured to be somewhere else, but we will go default all the way for now.

[peppyy]

@rockedge root# apache2ctl start
AH00534: apache2: Configuration error: No MPM loaded.

[rockedge]

Okay, that's an error expected! That is a module that conflicts with another an we will bring that in order next. I am making some screenshots for you so I'll be back (as Arni says)

[peppyy]

I found a thread where you were explaining it and set up the symlinks. Been doing a lot of reading on this rainy morning

Looking at the screenshot I just noticed I un-commented the ServerRoot line when I added the ServerName. I'll put that back the way it was until told to do so.

[rockedge]

Leave it! You are correct with the ServerName and ServerRoot and leave them now as you indicate in the screenshot.
You will need to enable all of the Apache mods. Symlink all of them except the mpm_worker.conf,mpm_worker.load and mpm_event.conf, mpm_event.load

Also symlink all of the files in /etc/apache2/conf-available to /etc/apache2/conf-enabled

Symlink /etc/apache2/sites-available/000-default.conf to /etc/apache2/sites-enabled/localhost-zm.conf

This is what I added...the paths in the config file will be somewhat different for you and only the ServerName is the difference between /etc/apache2/sites-enabled/192.168.0.24-zm.conf and /etc/apache2/sites-enabled/localhost-zm.conf. I have the second one to be able to use the sub-net IP instead of localhost

Code: Select all

<VirtualHost *:80>
	# The ServerName directive sets the request scheme, hostname and port that
	# the server uses to identify itself. This is used when creating
	# redirection URLs. In the context of virtual hosts, the ServerName
	# specifies what hostname must appear in the request's Host: header to
	# match this virtual host. For the default virtual host (this file) this
	# value is not decisive as it is used as a last resort host regardless.
	# However, you must set it for any further virtual host explicitly.
	ServerName 192.168.0.24

	ServerAdmin webmaster@localhost
	DocumentRoot /var/www/hiawatha
	ScriptAlias /cgi-bin /usr/lib/zoneminder/cgi-bin
    <Directory "/usr/lib/zoneminder/cgi-bin">
    Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch
    AllowOverride All
    Require all granted
    </Directory>
	
    Alias /phpmyadmin /usr/share/phpmyadmin
   <Directory /usr/share/phpmyadmin>
     Options -Indexes +FollowSymLinks
    <IfModule mod_dir.c>
     DirectoryIndex index.php
    </IfModule>
   </Directory>
   
ScriptAlias /cgi-bin "/usr/lib/zoneminder/cgi-bin"
<Directory "/usr/lib/zoneminder/cgi-bin">
    Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch
    AllowOverride All
    Require all granted
</Directory>   
   
   
	# Available loglevels: trace8, ..., trace1, debug, info, notice, warn,
	# error, crit, alert, emerg.
	# It is also possible to configure the loglevel for particular
	# modules, e.g.
	#LogLevel info ssl:warn

	ErrorLog ${APACHE_LOG_DIR}/error.log
	CustomLog ${APACHE_LOG_DIR}/access.log combined

	# For most configuration files from conf-available/, which are
	# enabled or disabled at a global level, it is possible to
	# include a line for only one particular virtual host. For example the
	# following line enables the CGI configuration for this host only
	# after it has been globally disabled with "a2disconf".
	#Include conf-available/serve-cgi-bin.conf
</VirtualHost>

these versions have some lines from the soon to be installed /etc/apache2/conf-available/zoneminder.conf which will be symlinked to /etc/apache2/conf-enabled/zoneminder.conf
which I found worked better.....because we must think outside of the box with Puppy Linux sometimes, and some of this stuff I am showing you took years of trial and error to get going smoothly, where in Ubuntu the package manager does it all including the database set up. Which we have not yet started.

once you have the symlinks in place try again apache2ctl start and report the result!

If it works the terminal will return to the command line prompt without any text

Screenshot(23).png (4.12 KiB) Viewed 1263 times

[rockedge]

If that happens in a browser try http://localhost

You may see a test page or just a empty directory list. Now make a php program called info.php in the web root.

Code: Select all

<?php
  phpinfo();
?>

now in the browser (if all the above worked) try http://localhost/info.php you should see a blank page

[peppyy]

Getting closer.
Do I need to install ZM before creating the next links?

[Clarity]

This thread starts with the OP's "Xeoma" camera concerns arriving at a solution.

This thread has taken on a completely new life as it has mophed to ZM only. I consider ZM an important discussion. Shouldn't the ZM discussion and its progress be moved and contained in its own ZM thread?

[rockedge]

@peppyy We can go a head and add the ZM parts as we go.

Do you see something like this using http://localhost/info.php?

(11).png (89.89 KiB) Viewed 1243 times

[peppyy]

@rockedge It appears that Apache2 does not like the command 'ServerName'
apache2ctl start
AH00526: Syntax error on line 70 of /etc/apache2/apache2.conf:
Invalid command 'SeverName', perhaps misspelled or defined by a module not included in the server configuration
Action 'start' failed.

Also http://localhost is 'unable to connect' however cups at localhost:631 is fine. I am guessing I missed a step somewhere.

I do not have a file named /etc/apache2/sites-enabled/localhost-zm.conf
Do I need to create it first?