Fossapup64 9.5

[bigpup]

9.0.5
Frugal, fresh new save folder.

menu->Graphic->Mtpaint-snapshot screen capture

Click on it and nothing happens.

[TerryH]

New manual frugal install on internal SSD in Dell laptop (details in Signature). A couple of minor issues. The Temperature in gatotray is shown as a constant value of 25 C, which appears to be the value of /sys/devices/virtual/thermal_zone0/temp. Is there any way to change the reference point for the temperature value to be used?

All software so far used, is running without issue. Another great addition to the Puppy Linux kennel. Thank you.

[bigpup]

I use this cpu temp display.

cpucurtemp64
Install the sensors64x.pet.
Then install the pmcpucurt64.pet.

The cpucurtemp has a file (pmcpucurt.dsktop) placed in ~/startup/autostart
To get it running and displaying in the tray.
Restart the x server or do a reboot (make sure the install gets into the save)
Or if you want to just run it without doing any reboot.
Navigate to ~/startup/autostart and click on pmcpucurt.dsktop file.
.

sensors64x.pet

(33.21 KiB) Downloaded 97 times

.

pmcpucurt64.pet

(22.85 KiB) Downloaded 92 times

.

Screenshot.jpg (9.24 KiB) Viewed 1896 times

[linuxunix]

Fossapup64 9.0.5 RC3 uploaded.

It would be helpful if you didn't use an old savefile/folder when testing as this will block out some of the changes that need testing

This was meant to be the release but there's been a few big changes so it's RC3. I'll leave this up for a week or so and if no major issues, it will be renamed 9.5 and will be the release.

changes:

kernel updated to 5.4.53 & updated firmware ...... this fixes @davids45's wifi dongle problem and is also the first kernel since bionicpup64 to boot without setting nomodeset on my desktop
xorg-autoconf by @mistfire now auto writes the xorg.conf
geany downgraded a version and is now quicker to open.
true transparency enabled in conky so no more black square
quickpet ... added lot's of .sfs and 2 nvidia drivers
browsers from quickpet now run as spot (fixes gmail login problem)
xlock fixed
claws-mail-feeds-reader added
fixed chess engine in eboard chess
@MochiMoppels gxmessage fix
fixmenus now in menu

there's an issue with picom and nouveau that can cause high cpu usage. best solution is to install the nvidia driver. if there's no driver for your card (old card) comment out # the "nouveau" line in /etc/X11/xorg.conf and restart X. This will use the modesetting driver but this has trouble setting other resolutions. If you have to use nouveau & resolution setting doesn't work (and you need it), you will have to disable picom menu>>>desktop>>jwmdesk>>window effects

true transparency enabled in conky so no more black square?
No conky
How to make conky transparent when using rc2?

[666philb]

9.0.5
Frugal, fresh new save folder.

menu->Graphic->Mtpaint-snapshot screen capture

Click on it and nothing happens.

thanks bigpup, i'll remove this menu entry and add the frugalpup help and uefi info to the installer

[666philb]

New manual frugal install on internal SSD in Dell laptop (details in Signature). A couple of minor issues. The Temperature in gatotray is shown as a constant value of 25 C, which appears to be the value of /sys/devices/virtual/thermal_zone0/temp. Is there any way to change the reference point for the temperature value to be used?

All software so far used, is running without issue. Another great addition to the Puppy Linux kennel. Thank you.

hi @TerryH
in a terminal run

Code: Select all

sensors-detect

just click through tapping enter for everything and at the end it will hopefully display the module that needs loading.
on my dell latitude it's the coretemp module.
you can then add this module in menu>>system>>bootmanager so it loads next boot.

[666philb]

true transparency enabled in conky so no more black square?
No conky
How to make conky transparent when using rc2?

hi @linuxunix
you'll need /etc/profile & /root/conkyrc & /root/.config/picom/picom.conf from the RC3
why not upgrade to RC3 as it fixes this and a number of other bugs?

[art]

9.0.5 issues creative error messages My ancient xfreecell game that works
on "everything" doesn't work on 9.0.5 Tying it in terminal I get:
X Error BadName
Request Major code 45 ()
Error Serial #8
Current Serial # 10

xfreecell 1.0.5a 1999

art

[666philb]

9.0.5 issues creative error messages My ancient xfreecell game that works
on "everything" doesn't work on 9.0.5 Tying it in terminal I get:
X Error BadName
Request Major code 45 ()
Error Serial #8
Current Serial # 10

xfreecell 1.0.5a 1999

art

hi @art
does it work in
9.0.4?

[art]

Yes, xfreecell works on 9.0.4 and 9.0.3

art

[666philb]

Yes, xfreecell works on 9.0.4 and 9.0.3

art

i think it maybe a problem with /root/.Xresources, as i had to change it to get pmwget to work. Try changing it back to this....

original version:

Code: Select all

!*font: -misc-fixed-medium-r-semicondensed--13-120-75-75-c-60-*-*
!*font: -misc-fixed-medium-r-normal--13-120-75-75-c-70-*-*
*font: -misc-fixed-medium-r-normal--14-130-75-75-c-70-*-*
!*font: -misc-fixed-medium-r-normal--15-140-75-75-c-90-*-*

Xft.dpi: 96

and see if that works.

if it does it will need looking at

[art]

art

i think it maybe a problem with /root/.Xresources, as i had to change it to get pmwget to work. Try changing it back to this....

original version:

Code: Select all

!*font: -misc-fixed-medium-r-semicondensed--13-120-75-75-c-60-*-*
!*font: -misc-fixed-medium-r-normal--13-120-75-75-c-70-*-*
*font: -misc-fixed-medium-r-normal--14-130-75-75-c-70-*-*
!*font: -misc-fixed-medium-r-normal--15-140-75-75-c-90-*-*

Xft.dpi: 96

and see if that works.

if it does it will need looking at

I replaced content of .Xresourses and rebooted but I get the same error message.

Perhaps better if you tried xfreecell:

http://home.ptd.net/~artnpeg/xfreecell

art

[TerryH]

hi @TerryH
in a terminal run

Code: Select all

sensors-detect

just click through tapping enter for everything and at the end it will hopefully display the module that needs loading.
on my dell latitude it's the coretemp module.
you can then add this module in menu>>system>>bootmanager so it loads next boot.

@666philb, yes it was coretemp which needed loading. All OK now. Thank you.

[Clarity]

Results of youtube-dl installation using instructions from here.

Needs a symbolic link for python3 use.
(# ln python3 python)

Code: Select all

root# python
bash: python: command not found
root# python3
Python 3.8.2 (default, Jul 16 2020, 14:00:26) 
[GCC 9.3.0] on linux
Type "help", "copyright", "credits" or "license" for more information.
>>> exit
Use exit() or Ctrl-D (i.e. EOF) to exit
>>> exit()
root# wget https://yt-dl.org/downloads/latest/youtube-dl -O /usr/local/bin/youtube-dl
--2020-08-14 18:49:39--  https://yt-dl.org/downloads/latest/youtube-dl
Resolving yt-dl.org (yt-dl.org)... 95.143.172.170
Connecting to yt-dl.org (yt-dl.org)|95.143.172.170|:443... connected.
HTTP request sent, awaiting response... 302 Found
Location: https://yt-dl.org/downloads/2020.07.28/youtube-dl [following]
--2020-08-14 18:49:40--  https://yt-dl.org/downloads/2020.07.28/youtube-dl
Connecting to yt-dl.org (yt-dl.org)|95.143.172.170|:443... connected.
HTTP request sent, awaiting response... 302 Found
Location: https://github.com/ytdl-org/youtube-dl/releases/download/2020.07.28/youtube-dl [following]
--2020-08-14 18:49:41--  https://github.com/ytdl-org/youtube-dl/releases/download/2020.07.28/youtube-dl
Resolving github.com (github.com)... 140.82.114.4
Connecting to github.com (github.com)|140.82.114.4|:443... connected.
HTTP request sent, awaiting response... 302 Found
Location: https://github-production-release-asset-2e65be.s3.amazonaws.com/1039520/379b9580-d091-11ea-8070-0afb2be10c94?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Credential=AKIAIWNJYAX4CSVEH53A%2F20200814%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20200814T224804Z&X-Amz-Expires=300&X-Amz-Signature=660b9f318b75631d8925efdc9f695391e2e575bd286dba8e168533546e7622d6&X-Amz-SignedHeaders=host&actor_id=0&repo_id=1039520&response-content-disposition=attachment%3B%20filename%3Dyoutube-dl&response-content-type=application%2Foctet-stream [following]
--2020-08-14 18:49:41--  https://github-production-release-asset-2e65be.s3.amazonaws.com/1039520/379b9580-d091-11ea-8070-0afb2be10c94?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Credential=AKIAIWNJYAX4CSVEH53A%2F20200814%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20200814T224804Z&X-Amz-Expires=300&X-Amz-Signature=660b9f318b75631d8925efdc9f695391e2e575bd286dba8e168533546e7622d6&X-Amz-SignedHeaders=host&actor_id=0&repo_id=1039520&response-content-disposition=attachment%3B%20filename%3Dyoutube-dl&response-content-type=application%2Foctet-stream
Resolving github-production-release-asset-2e65be.s3.amazonaws.com (github-production-release-asset-2e65be.s3.amazonaws.com)... 52.216.110.211
Connecting to github-production-release-asset-2e65be.s3.amazonaws.com (github-production-release-asset-2e65be.s3.amazonaws.com)|52.216.110.211|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 1756500 (1.7M) [application/octet-stream]
Saving to: ‘/usr/local/bin/youtube-dl’

/usr/local/bin/youtube-dl      100%[====================================================>]   1.67M  3.55MB/s    in 0.5s    

2020-08-14 18:49:42 (3.55 MB/s) - ‘/usr/local/bin/youtube-dl’ saved [1756500/1756500]

root# chmod a+rx /usr/local/bin/youtube-dl
root# which youtube-dl
/usr/local/bin/youtube-dl
root# youtube-dl
env: can't execute 'python': No such file or directory

[mistfire]

@666philb

I made some changes on woof-ce, recently merged:

1. xorg-autoconf - exa acceleration is now disabled for radeon wrestler architecture and some improvements for nvidia and amd gpu detection.

2. passwd, group, gshadow - Fixed group id and some revisions related to messagebus group. This was highly affects on the functionality of D-bus.

This is just a notification

[bigpup]

9.0.5
frugal, fresh save folder.

menu->Fun->Rubix cube puzzle

Will not run.
Get this error in terminal:

root# rubix
cannot load font 7x13 !!
Error with initing the screen

.

[666philb]

@art & @bigpup those bugs should be fixed now in quickpet >> updates

info on the the games not working issue https://github.com/puppylinux-woof-CE/w ... ssues/1856

[linuxunix]

hi @linuxunix
you'll need /etc/profile & /root/conkyrc & /root/.config/picom/picom.conf from the RC3
why not upgrade to RC3 as it fixes this and a number of other bugs?

Hello there! rc3 does not recognize this network card, is there a driver?
RTL8168/8111/8112 Gigabit Ethernet Controller

[666philb]

Hello there! rc3 does not recognize this network card, is there a driver?
RTL8168/8111/8112 Gigabit Ethernet Controller

hi @linuxunix
can you run this in a terminal and post the results here

Code: Select all

dmesg | grep -i firmware

also did this card work in RC2?

[666philb]

Results of youtube-dl installation using instructions from here.

Needs a symbolic link for python3 use.
(# ln python3 python)

Code: Select all

root# python
bash: python: command not found
root# python3
Python 3.8.2 (default, Jul 16 2020, 14:00:26) 
[GCC 9.3.0] on linux
Type "help", "copyright", "credits" or "license" for more information.
>>> exit
Use exit() or Ctrl-D (i.e. EOF) to exit
>>> exit()
root# wget https://yt-dl.org/downloads/latest/youtube-dl -O /usr/local/bin/youtube-dl
--2020-08-14 18:49:39--  https://yt-dl.org/downloads/latest/youtube-dl
Resolving yt-dl.org (yt-dl.org)... 95.143.172.170
Connecting to yt-dl.org (yt-dl.org)|95.143.172.170|:443... connected.
HTTP request sent, awaiting response... 302 Found
Location: https://yt-dl.org/downloads/2020.07.28/youtube-dl [following]
--2020-08-14 18:49:40--  https://yt-dl.org/downloads/2020.07.28/youtube-dl
Connecting to yt-dl.org (yt-dl.org)|95.143.172.170|:443... connected.
HTTP request sent, awaiting response... 302 Found
Location: https://github.com/ytdl-org/youtube-dl/releases/download/2020.07.28/youtube-dl [following]
--2020-08-14 18:49:41--  https://github.com/ytdl-org/youtube-dl/releases/download/2020.07.28/youtube-dl
Resolving github.com (github.com)... 140.82.114.4
Connecting to github.com (github.com)|140.82.114.4|:443... connected.
HTTP request sent, awaiting response... 302 Found
Location: https://github-production-release-asset-2e65be.s3.amazonaws.com/1039520/379b9580-d091-11ea-8070-0afb2be10c94?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Credential=AKIAIWNJYAX4CSVEH53A%2F20200814%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20200814T224804Z&X-Amz-Expires=300&X-Amz-Signature=660b9f318b75631d8925efdc9f695391e2e575bd286dba8e168533546e7622d6&X-Amz-SignedHeaders=host&actor_id=0&repo_id=1039520&response-content-disposition=attachment%3B%20filename%3Dyoutube-dl&response-content-type=application%2Foctet-stream [following]
--2020-08-14 18:49:41--  https://github-production-release-asset-2e65be.s3.amazonaws.com/1039520/379b9580-d091-11ea-8070-0afb2be10c94?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Credential=AKIAIWNJYAX4CSVEH53A%2F20200814%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20200814T224804Z&X-Amz-Expires=300&X-Amz-Signature=660b9f318b75631d8925efdc9f695391e2e575bd286dba8e168533546e7622d6&X-Amz-SignedHeaders=host&actor_id=0&repo_id=1039520&response-content-disposition=attachment%3B%20filename%3Dyoutube-dl&response-content-type=application%2Foctet-stream
Resolving github-production-release-asset-2e65be.s3.amazonaws.com (github-production-release-asset-2e65be.s3.amazonaws.com)... 52.216.110.211
Connecting to github-production-release-asset-2e65be.s3.amazonaws.com (github-production-release-asset-2e65be.s3.amazonaws.com)|52.216.110.211|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 1756500 (1.7M) [application/octet-stream]
Saving to: ‘/usr/local/bin/youtube-dl’

/usr/local/bin/youtube-dl      100%[====================================================>]   1.67M  3.55MB/s    in 0.5s    

2020-08-14 18:49:42 (3.55 MB/s) - ‘/usr/local/bin/youtube-dl’ saved [1756500/1756500]

root# chmod a+rx /usr/local/bin/youtube-dl
root# which youtube-dl
/usr/local/bin/youtube-dl
root# youtube-dl
env: can't execute 'python': No such file or directory

hi @Clarity
i wasn't sure about adding that link as we still have python2 in the repo but probably will add it .... thanks

[666philb]

hi @TerryH
in a terminal run

Code: Select all

sensors-detect

just click through tapping enter for everything and at the end it will hopefully display the module that needs loading.
on my dell latitude it's the coretemp module.
you can then add this module in menu>>system>>bootmanager so it loads next boot.

@666philb, yes it was coretemp which needed loading. All OK now. Thank you.

hi @TerryH
you can also add the temp to conky with

Code: Select all

${hwmon 0 temp 1}°C

i have it near the top in a bigger font

Code: Select all

${color2}Uptime ${uptime}${font DejaVuSans:size=20}${alignr}${hwmon 0 temp 1}°C${font DejaVuSans:size=9}

note that the values of hwmon may be different on other computers. typing

Code: Select all

sensors

should show the value. on my dell i have two ...... temp 2 & temp 4 ,one for each core.

Also, if you look in /sys/class/hwmon you may have other sensors. for instance on this netbook i have hwmon0 and hwmon1. 0 being the cpu & 1 being the gpu which could be added as well ${hwmon 1 temp 1}

[iarda1]

Hi... Who or what is wasting 30% CPU ever?
videos jerking, opening browser extremely slow...

[666philb]

Hi... Who or what is wasting 30% CPU ever?
videos jerking, opening browser extremely slow...

hi @iarda1
on the release post see .....

there's an issue with picom and nouveau that can cause high cpu usage. best solution is to install the nvidia driver. if there's no driver for your card (old card) comment out # the "nouveau" line in /etc/X11/xorg.conf and restart X. This will use the modesetting driver but this has trouble setting other resolutions. If you have to use nouveau & resolution setting doesn't work (and you need it), you will have to disable picom menu>>>desktop>>jwmdesk>>window effects

[Clarity]

hi @Clarity
i wasn't sure about adding that link as we still have python2 in the repo but probably will add it .... thanks

If you feel it would help, maybe include youtube-dl in the base system. But please use the youtube-dl website's published installation path so that its update feature, "youtube-dl -U", works properly ongoing into the future.

...issue with picom and nouveau...

In the last RC, I had "significant" issues with bad desktop behavior forcing to Cntrl-Alt-Bksp and restart the desktop..many times during a given session. But, thus far on v905RC, I have not seen it on this AMD A8-7410 APU with AMD Radeon R5 Graphics.

P.S. I want to thank you for all of your efforts. Touchscreen tracking on the desktop is PERFECT! I love the fact that the Conky is active, OOTB! Excellent choice not just for beta/RC, but for overall system activity.

Is there a way to limit the Conky display to just Desktop #1 vs all desktops? (BUT I do not want to get rid of it as it is an invaluable OOTB addition)

[OscarTalks]

This is (I believe) the latest release of Celluloid
Version 0.19
A small GTK3 front end GUI for MPV
Formerly known as Gnome MPV before the name change
Compiled from source in FossaPup
Some Right-Click associations for video have been added, but you can set as default player as well.

[666philb]

after messing around with the nouveau driver and picom i think that i'll have to have picom use the xrender backend if nouveau is detected. this unfortunately disables vsync, but other compositing effects still work. i may have a popup with the suggestions on the release post

[666philb]

This is (I believe) the latest release of Celluloid
Version 0.19
A small GTK3 front end GUI for MPV
Formerly known as Gnome MPV before the name change
Compiled from source in FossaPup
Some Right-Click associations for video have been added, but you can set as default player as well.

thanks @OscarTalks
added to repo

[666philb]

hi @Clarity
i wasn't sure about adding that link as we still have python2 in the repo but probably will add it .... thanks

If you feel it would help, maybe include youtube-dl in the base system. But please use the youtube-dl website's published installation path so that its update feature, "youtube-dl -U", works properly ongoing into the future.

...issue with picom and nouveau...

In the last RC, I had "significant" issues with bad desktop behavior forcing to Cntrl-Alt-Bksp and restart the desktop..many times during a given session. But, thus far on v905RC, I have not seen it on this AMD A8-7410 APU with AMD Radeon R5 Graphics.

P.S. I want to thank you for all of your efforts. Touchscreen tracking on the desktop is PERFECT! I love the fact that the Conky is active, OOTB! Excellent choice not just for beta/RC, but for overall system activity.

Is there a way to limit the Conky display to just Desktop #1 vs all desktops? (BUT I do not want to get rid of it as it is an invaluable OOTB addition)

hi @Clarity
i'm not going to add youtube-dl to the iso as there's tartube in quickpet that brings it in.
not sure about the conky on different desktops you'll have to do some googling. https://forum.mxlinux.org/viewtopic.php?t=41788

it's good to hear that touch screen is working well as that is something i can't test.

also could you let me know what driver is being used in the device section of /etc/X11/xorg.conf

cheers

[bigpup]

@art & @bigpup those bugs should be fixed now in quickpet >> updates

info on the the games not working issue https://github.com/puppylinux-woof-CE/w ... ssues/1856

Did quickpet >> updates

These are fixed:
Frugalpup help is working.
menu->Graphic->Mtpaint Snapshot is removed.

Not fixed:
Rubix Cube Puzzle still not working.
Still get this error:

root# rubix
cannot load font 7x13 !!
Error with initing the screen.
root#

Also, Quickpet->Help->Installed bug fixes
.

Screenshot(1).jpg (6.64 KiB) Viewed 1973 times

[666philb]

@art & @bigpup those bugs should be fixed now in quickpet >> updates

info on the the games not working issue https://github.com/puppylinux-woof-CE/w ... ssues/1856

Did quickpet >> updates

These are fixed:
Frugalpup help is working.
menu->Graphic->Mtpaint Snapshot is removed.

Not fixed:
Rubix Cube Puzzle still not working.
Still get this error:

root# rubix
cannot load font 7x13 !!
Error with initing the screen.
root#

Also, Quickpet->Help->Installed bug fixes
.
Screenshot(1).jpg

hi @bigpup
you need to restart X for the fix to work. ... also i didn't fill in the bugfixes text