How to use Droidcam in Fossapup?

[WKM]

Hello,

I would like to use the app "Droidcam" under Puppy (current version: fossapup649.5frugal).
It works on Windows. I have installation errors on Linux.

https://www.dev47apps.com/droidcam/linux/
https://www.dev47apps.com

Greeting
Siegfried

[666philb]

hi @WKM

here's some instructions for droidcam....

1. install the 'devx' from quickpet>>useful
2. install the 'kernel src' from quickpet>>useful
3. then follow the droidcam install instructions

Code: Select all

wget https://files.dev47apps.net/linux/droidcam_latest.zip
unzip droidcam_latest.zip -d droidcam && cd droidcam
./install

4. to run use droidcam in the terminal
5. use menu>>>multimedia>>>guvcview to view the camera output


or if you are feeling lazy here's a .pet with a menu entry

[WKM]

Hello,
I followed everything so. Droidcam works as it should.
Thank you for your competent help,

Greeting
Siegfried

[Clarity]

Hi @666philb or anyone: Any ideas for having the system show the local USB camera's video.

Droidcam is only built for cameras that are NOT attached to the PC.

Droidcam does not associate the local webcam.jpg (14.14 KiB) Viewed 1151 times

[Grey]

Any ideas for having the system show the local USB camera's video.

You can try using xawtv(viewer for TV tuners and cams) - PPM has it. Something like this:

Code: Select all

xawtv -c /dev/video0

With Nvidia card:

Code: Select all

xawtv -nodga -c /dev/video0

Fossapup has Guvcview. In general, VLC and mpv(and everything based on it) should be able to do this.

[Clarity]

... Fossapup has Guvcview. In general, VLC and mpv(and everything based on it) should be able to do this.

Thanks. Never knew Guvcview was built-in. It probably should be in the Menu under Multimedia, making it easy to find and use, since a growing number of us have and are using these local units for various needs.

Others may find this of interest: I've found 2 videos which give some useful ideas to use the USB webcam

• Video1

• Video2

Thanks for your directions!

[Clarity]

... You can try using xawtv(viewer for TV tuners and cams) - PPM has it. ...

I tried xawtv on not one but 2 USBs to see if I could get either to show the camera's view. 'xawtv', after reading seems to have promise beyond just the webcams.

PPM installs fine. Yet in use???
Here's what is happening in the terminal...but NO video window emerges. 'video0 &video1' are from camera #1 while 'video2&3' got added when the 2nd camera was plugged in. Neither offered a window feed.

USBcam attempts.jpg (23.34 KiB) Viewed 1124 times

USBcam console log.txt

(4.29 KiB) Downloaded 49 times

[Grey]

but NO video window emerges.

If Guvcview works, then forget about this xawtv

[Grey]

I've found 2 videos which give some useful ideas to use the USB webcam

In my opinion, the most interesting combination of camera and computer is Stop Motion Animations. Many Soviet-Russian cartoons were made in this manner. Of course, "Wallace and Gromit" comes to mind from British animations.
A children's club(more likely a studio) was recently opened in my town, and there children sculpt various figures(people, animals, furniture and so on) from plasticine, and then create stop motion animations. Programs are used: Linux Stopmotion and qStopMotion, as well as Entangle and something else.
I'm trying to persuade a studio manager I know to switch to Puppy Linux
Five minutes of madness :