Slacko Puppy 7.0

zigbert · Post by **zigbert** » Sun Jan 24, 2021 4:52 pm

@666philb Thanks for your reply. The output of nvidia-xconfig is as follow:

# nvidia-xconfig 

Using X configuration file: "/etc/X11/xorg.conf".

VALIDATION ERROR: Data incomplete in file /etc/X11/xorg.conf.
                  Undefined Device "(null)" referenced by Screen "Screen0".

Backed up file '/etc/X11/xorg.conf' as
'/etc/X11/xorg.conf.nvidia-xconfig-original'
Backed up file '/etc/X11/xorg.conf' as '/etc/X11/xorg.conf.backup'
New X configuration file written to '/etc/X11/xorg.conf'

The new xorg.conf is unable to load X

666philb · Post by **666philb** » Sun Jan 24, 2021 5:51 pm

zigbert wrote: ↑Sun Jan 24, 2021 4:52 pm

@666philb Thanks for your reply. The output of nvidia-xconfig is as follow:

Code: Select all

# nvidia-xconfig 

Using X configuration file: "/etc/X11/xorg.conf".

VALIDATION ERROR: Data incomplete in file /etc/X11/xorg.conf.
                  Undefined Device "(null)" referenced by Screen "Screen0".

Backed up file '/etc/X11/xorg.conf' as
'/etc/X11/xorg.conf.nvidia-xconfig-original'
Backed up file '/etc/X11/xorg.conf' as '/etc/X11/xorg.conf.backup'
New X configuration file written to '/etc/X11/xorg.conf'

The new xorg.conf is unable to load X

i've had this before, it's just the screen section of xorg.conf needs adjusting.
worth a punt ... try

Code: Select all

xorg-autoconf > /etc/X11/xorg.conf

if that doesn't work, run nvidia-xconfig again and then post the xorg.conf here

zigbert · Post by **zigbert** » Sun Jan 24, 2021 7:37 pm

@666philb Thank you!

xorg-autoconf didn't do the job...

Here follows the xorg.conf

Code: Select all

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 455.45.01

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0"
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
EndSection

Section "Files"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Unknown"
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Post by **bigpup** » Sun Jan 24, 2021 9:39 pm

I have never gotten running the nvidia-xconfig to do anything but mess up the xorg.conf.
Do not use it.
Only use xorgwizard to make graphic changes to xorg.conf

The only idea I have why xorgwizard did not work, after the driver compiled and installed.
Make sure to only have installed one Nvidia driver.
You said you tired several driver run packages.
Did you make sure to completely uninstall the Nvidia driver and all it's files, before trying a different one?
If there is more than one Nvidia driver installed. Xorgwizard will not know which one to use and just will use nothing.
You will probably need to use Pfind program to find all the Nvidia driver run package installed and then remove it by deleting in Rox file manager.

This is my working xorg.conf

Code: Select all

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

    Option "IgnoreABI" "true"

# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
# (where n is 1 through 12).  This allows clients to receive these key
# events.

    Option "DontVTSwitch" "true"

# Enables mode switching with xrandr
# There is a report that this can cause Xorg not to work on some
# video hardware, so default is commented-out...
# but i want to use it in xorgwizard so leave on...

    Option "RandR" "on"

# With this, Xorg wont talk to HAL to add evdev devices and youll be back
# with the old Xorg behavior (pre-7.4)...

    Option "AutoAddDevices" "true"

# For no-Hal, kirk also suggests this...

#    Option "AllowMouseOpenFail" "true"

# Xorg 7.4, Ubuntu Jaunty, CTRL-ALT-BACKSPACE is disabled by default...

    Option "DontZap" "false"

EndSection

Section "ServerLayout"
	Identifier     "X.org Configured"
	Screen      0  "Screen0" 0 0
	# InputDevice "Synaptics Mouse" "AlwaysCore" #serverlayoutsynaptics
	# InputDevice "VboxMouse" "CorePointer"	
	#InputDevice "Mouse0" "CorePointer"
	#InputDevice "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
	ModulePath   "/usr/lib64/xorg/modules"
	FontPath     "/usr/share/fonts/local"
	FontPath     "/usr/share/fonts/TTF"
	FontPath     "/usr/share/fonts/OTF"
	FontPath     "/usr/share/fonts/Type1"
	FontPath     "/usr/share/fonts/misc"
	FontPath     "/usr/share/fonts/truetype"
	FontPath     "/usr/share/fonts/opentype"
	FontPath     "/usr/share/fonts/woff"
	FontPath     "/usr/share/fonts/CID"
	FontPath     "/usr/share/fonts/75dpi/:unscaled"
	FontPath     "/usr/share/fonts/100dpi/:unscaled"
	FontPath     "/usr/share/fonts/75dpi"
	FontPath     "/usr/share/fonts/100dpi"
	FontPath     "/usr/share/fonts/cyrillic"
	FontPath     "/usr/share/fonts/X11/misc"
	FontPath     "/usr/share/X11/fonts/misc"
	FontPath     "/usr/share/fonts/X11/TTF"
	FontPath     "/usr/share/fonts/X11/OTF"
	FontPath     "/usr/share/fonts/X11/Type1"
	FontPath     "/usr/share/fonts/X11/100dpi"
	FontPath     "/usr/share/fonts/X11/75dpi"
	FontPath     "/usr/share/X11/fonts"
	FontPath     "/usr/local/share/fonts"
	FontPath     "/usr/local/share/X11/fonts"
EndSection

Section "Module"
# Load "synaptics" #loadsynaptics
	Load  "glx"
EndSection

Section "InputClass"
	Identifier "Keyboard Defaults"
	MatchIsKeyboard "yes"
	Option      "XkbModel" "pc104" #xkbmodel0
	Option      "XkbLayout" "us"
	#Option      "XkbVariant" "" #xkbvariant0
	Option      "XkbOptions" "terminate:ctrl_alt_bksp" #xkboptions0
EndSection

Section "Monitor"
	Identifier   "Monitor0"
	VendorName   "Monitor Vendor"
	ModelName    "Monitor Model"
	HorizSync    35-81
	VertRefresh  59-76
	#UseModes     "Modes0" #monitor0usemodes
#	Option      "PreferredMode" "1024x768" #monitor0prefmode
EndSection

Section "Modes"
	Identifier "Modes0"
	#modes0modeline0
EndSection

Section "Device"
	Identifier  "Card0"
	Driver      "nvidia" #card0driver
EndSection

Section "Screen"
	Identifier "Screen0"
#	Device     "Card0"
	Monitor    "Monitor0"
#	DefaultDepth 24
	#Option         "metamodes" "1280x800_60 +0+0" #METAMODES_0
	Subsection "Display"
		Depth       24 #screen0depth
		Modes       "1920x1080" #screen0modes
	EndSubsection
EndSection

zigbert · Post by **zigbert** » Mon Jan 25, 2021 8:32 am

@bigpup I compared our xorg.conf, and they are rather similar. I edited manually to make them match without any success.

I did uninstall each driver, but did an extra check for leftovers. - Nothing to find.

zigbert · Post by **zigbert** » Mon Jan 25, 2021 8:41 am

@666philb
@bigpup

I looked at the xorg.conf in Tuxedo-OS that makes it right on this laptop. They have put it together somewhat different than in Puppy, but it maybe tell anyone something valuable... It seems to me that xorg.conf is built out of some "layers" where each conf.file is one layer.

00-Tuxedo-nvidia-amdgpu-fix.conf

Code: Select all

# added by tuxedo-tomte 20210111105533
Section "OutputClass"
	Identifier "nvidia"
	MatchDriver "nvidia-drm"
	Driver "nvidia"
	Option "AllowEmptyInitialConfiguration"
	ModulePath "/usr/lib/x86_64-linux-gnu/nvidia/xorg"
	Option "PrimaryGPU" "Yes"
EndSection

I checked the bios, and it is no place to disable the builtin radeon gpu (AMD Ryzen 7 4800H)

10-nvidia.conf

Code: Select all

Section "OutputClass"
    Identifier "nvidia"
    MatchDriver "nvidia-drm"
    Driver "nvidia"
    Option "AllowEmptyInitialConfiguration"
    ModulePath "/usr/lib/x86_64-linux-gnu/nvidia/xorg"
EndSection

There are 7 files in total, but only these 2 refers to nvidia

666philb · Post by **666philb** » Mon Jan 25, 2021 8:51 am

you could try adding that

Option "PrimaryGPU" "Yes"

but the screen section needs filling out, can you pinch that from tuxedo

zigbert · Post by **zigbert** » Mon Jan 25, 2021 11:51 am

@666philb
Tried the PrimaryGPU option, but no different behavior.

Tried to find the screen-section. - I didn't. A global search lead to xorgparser.py, but the only xorg.conf is in /usr/share/doc/xserver-xorg-vifdeo-intel and holds

Code: Select all

Section "Device"
	Identifier "Intel"
	Driver "intel"
#	Option "AccelMethod" "uxa"
EndSection

The earlier described conf-files only holds sections - InputClass and OutputClass. I am clearly missing something, but Tuxedo is set up in another way... These files are located in /usr/share/X11.

Code: Select all

# pwd
/mnt/nvme0n1p2/usr/share/X11/xorg.conf.d
# ls
00-tuxedo-nvidia-amdgpu-fix.conf  10-quirks.conf    70-wacom.conf
10-amdgpu.conf                    10-radeon.conf
10-nvidia.conf                    40-libinput.conf

I did a test to use driver "amdgpu" instead of "nvidia", but this one also fails to load X.
Could it be kernel related? Tuxedo ships with Linux-5.6

Post by **bigpup** » Mon Jan 25, 2021 1:48 pm

zigbert,

You have a Tuxedo laptop (Polaris 15) that has a Intel processor with integrated graphics in the processor.
It also has a Nvidia graphics card.
In laptops setup this way they are suppose to start using the Intel integrated Graphics. Use it for all normal low demand stuff.
The Nvidia hardware only gets used for high demand graphics.
If the operating system has correct support, this switching is automatic.

Puppy does not have this support and will only use the Intel processor integrated graphics.
It will never use the Nvidia hardware.
Check Pup-Sysinfo->Devices->Display->Summary
If it says the kernel driver in use: i915
That is what Puppy is using.

This intel/nvidia graphics laptop setup is called Nvidia Optimus
Here is some info on Nvidia Optuimus on Linux
viewtopic.php?p=11552#p11552

I have seen no one in Puppy try to get this working in Puppy.
Maybe you can have some luck with it.
Not sure what needs to be added to Puppy to provide support.

This is not completely a bad thing for Puppy graphics.
If all you can get is the processor integrated graphics.
That graphics hardware is still very good high end for what Puppy needs for graphics.
If you have an Intel i7 processor with integrated graphics.
It is not too far down in ability, from the Nvidia hardware.

zigbert · Post by **zigbert** » Mon Jan 25, 2021 2:11 pm

@bigpup
The Polaris 15 comes with several configurations, and I chose the AMD/Nvidia mix. Will this have similar issues as with Intel?

PupSysInfo - Video

Code: Select all

▶—— Video ——◀

Display Specifications:
• Monitor VertRefresh: 77.00 times/s
• Screen Dimensions: 1920x1080 pixels (508x286 millimeters)
• Screen Depth: 24 bits (planes)

Xorg Startup Log (/var/log/Xorg.0.log):
• Xorg Driver in use: fbdev
• Loaded Modules: evdev fb fbdevhw glx shadow synaptics
• X.Org version: 1.18.3

OpenGL 2D/3D Rendering:


VGA controller [0300]: NVIDIA Corporation TU116M [GeForce GTX 1650 Ti Mobile] [10de:2192] (rev a1)
• Kernel Driver: nvidia
• Memory Used by Driver: 27476.00 KB
• Path: /lib/modules/5.4.86/kernel/drivers/video/nvidia.ko
• Driver Version: 455.45.01
• Description: N/A
• Video RAM:

PupSysInfo - CPU

Code: Select all

▶—— CPU ——◀

AMD Ryzen 7 4800H with Radeon Graphics
Socket Designation: FP6
Manufacturer: Advanced Micro Devices, Inc.
Voltage: 1.2 V
External Clock: 100 MHz
Min/Max Speed: 1400/2900 MHz
Current Speed of Core 0:1400 MHz, 1:1700 MHz, 2:1400 MHz, 3:1400 MHz, 4:1400 MHz, 5:1400 MHz, 6:1400 MHz, 7:1400 MHz, 8:1400 MHz, 9:1400 MHz, 10:1400 MHz, 11:1400 MHz, 12:2900 MHz, 13:1400 MHz, 14:1400 MHz, 15:1400 MHz
Core Count: 8
Thread Count: 16
64-bit capable: Yes

Post by **bigpup** » Mon Jan 25, 2021 3:04 pm

OK, I have no knowledge of the AMD/Nvidia mix setup.

This may help or give you some ideas.
https://wiki.archlinux.org/index.php/PRIME

666philb · Post by **666philb** » Mon Jan 25, 2021 6:09 pm

here's my nvidia screen section created by the nvidia driver which you could try to adapt. you may well also need the PrimaryGPU option or just copy that over to xorg.conf.d folder from tuxedo

if it doesn't work try xorg-autoconf again and adapt that xorg.conf

Code: Select all

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "Stereo" "0"
    Option         "nvidiaXineramaInfoOrder" "DFP-1"
    Option         "metamodes" "nvidia-auto-select +0+0 {ForceCompositionPipeline=On, ForceFullCompositionPipeline=On}"
    Option         "SLI" "Off"
    Option         "MultiGPU" "Off"
    Option         "BaseMosaic" "off"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

zigbert · Post by **zigbert** » Mon Jan 25, 2021 10:08 pm

Thank you both @666philb and @bigpup for your feedback!

I have used some hours to see if I could use your knowledge, and take this process a bit further... Or if I have to give up and use Tuxedo-OS. I have found some info, so I feel it is too early to give it all up.

I have tested several configurations of xorg.conf, and it has given one single result. If adding

Code: Select all

Option         "AllowEmptyInitialConfiguration"

to the screen section, it seems that X is starting. Because:
- I am not thrown back to prompt, but screen stays black.
- If I push the powerbutton (hardware), I am thrown back to prompt in 30 seconds, and system is powering off. This behavior is similar to the suspend dialog box in Slacko. This function only works in X (as far as I know).

So, I wonder if we actually could have reached X with another issue? The default refreshrate set in xorg.conf is

Code: Select all

	HorizSync    35-81
	VertRefresh  59-76

Vertical refreshrate is reported by xrandr to 77, but I am not able to find horizontal syncrate. Not even able to find what monitor I have. I wonder if these settings can make it crash? I have tested 'VertRefresh 77' in xorg.conf without any further luck.

Code: Select all

# xrandr
xrandr: Failed to get size of gamma for output default
Screen 0: minimum 1920 x 1080, current 1920 x 1080, maximum 1920 x 1080
default connected 1920x1080+0+0 0mm x 0mm
   1920x1080     77.00*

Output from PupSysInfo:

Code: Select all

Display Specifications:
• Monitor VertRefresh: 77.00 times/s
• Screen Dimensions: 1920x1080 pixels (508x286 millimeters)
• Screen Depth: 24 bits (planes)

Code: Select all

▶ X-SERVER SCREEN INFORMATION:

Name of display:  :0
Version number:  11.0
Vendor string:  The X.Org Foundation
Vendor release number:  11803000
X.Org version: 1.18.3
Number of extensions:  27
  BIG-REQUESTS
  Composite
  DAMAGE
  DOUBLE-BUFFER
  DPMS
  DRI2
  GLX
  Generic Event Extension
  MIT-SCREEN-SAVER
  MIT-SHM
  Present
  RANDR
  RECORD
  RENDER
  SGI-GLX
  SHAPE
  SYNC
  X-Resource
  XC-MISC
  XFIXES
  XFree86-DGA
  XFree86-VidModeExtension
  XINERAMA
  XInputExtension
  XKEYBOARD
  XTEST
  XVideo
Default screen number:  0
Number of screens:  1

Screen #0:
  dimensions:  1920x1080 pixels (508x286 millimeters)
  resolution:  96x96 dots per inch
  depths (7):  24, 1, 4, 8, 15, 16, 32
  root window id:  0x25d
  depth of root window:  24 planes

Do you have any clues?

zigbert · Post by **zigbert** » Mon Jan 25, 2021 10:56 pm

The saga continues...

As described in the previous post, it seemed like X is running. - It is. Internal monitor goes black, while external monitor gets the signal. Sadly it is really bad image-quality on the monitor. The external monitor is unusable like this. It is simply not possible to see what's going on...
I really would like some advice if you have any experience with something similar.

The photo (not a screenshot - that shows correct colors) shows Rubix, Abiword, pMusic and Gnumeric. I have no idea why Gnumeric looks rather normal while the others goes dark. I have tried every setting on the monitor menu. The monitor works normal with my other pc.

Thanks a lot for any knowledge - so close!

zigbert · Post by **zigbert** » Mon Jan 25, 2021 11:25 pm

Ha ha ha!
Sometimes tweaking has been going on too long

Resetting all values in the Xorg video wizard made the job - Obviously time for bed...

The result (for now) is:

'nvidia' for external monitor
'fbdev' for laptop monitor

Thanks for all help!

Post by **bigpup** » Tue Jan 26, 2021 8:17 am

Monitor VertRefresh: 77.00 times/s

I think this is the problem with the external monitor.
77.00 is just not a normal refresh rate.
It needs to be something around 60.00Hz.

You have the laptops monitor and an external monitor.

I would go back to basics and first get the laptops monitor correctly working.

I would go back to the very first boot up condition and boot Slacko 7.0 with no save.
Start fresh.

Also look in the laptops UEFI bios setup for any settings affecting what hardware is providing graphics.
Any settings for graphics at all.
Disable or enable settings.
Any auto options for settings. Usually set to auto just works.

Get the laptops monitor correctly working and using the correct hardware.
Then move to making the external monitor correct.

zigbert · Post by **zigbert** » Sat Jan 30, 2021 9:55 am

Installing from PPM works fine, but not able to uninstall app afterwards. Clicking the uninstall button shows an empty list.

zigbert · Post by **zigbert** » Sun Jan 31, 2021 12:43 am

Trying to run the kdenlive appimage from their homepage - https://kdenlive.org/en/download/

Run it, flashes the splashscreen before halting...

Code: Select all

"Session bus not found\nTo circumvent this problem try the following command (with Linux and bash)\nexport $(dbus-launch)"

Do you know what this means? Is there a solution?

Complete output:

Code: Select all

# ./kdenlive-20.12.1b-x86_64.appimage 
Invalid Context= "Apps" line for icon theme:  "/usr/share/icons/gnome/scalable/apps/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/PMaterial/16/places/"
Invalid Context= "Mimetypes" line for icon theme:  "/usr/share/icons/PMaterial/16/mimetypes/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/PMaterial/16/emotes/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/PMaterial/16/emblems/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/PMaterial/16/categories/"
Invalid Context= "Apps" line for icon theme:  "/usr/share/icons/PMaterial/16/apps/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/PMaterial/16/devices/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/PMaterial/16/status/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/PMaterial/16/actions/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/PMaterial/22/places/"
Invalid Context= "Mimetypes" line for icon theme:  "/usr/share/icons/PMaterial/22/mimetypes/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/PMaterial/22/emotes/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/PMaterial/22/emblems/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/PMaterial/22/categories/"
Invalid Context= "Apps" line for icon theme:  "/usr/share/icons/PMaterial/22/apps/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/PMaterial/22/devices/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/PMaterial/22/status/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/PMaterial/22/actions/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/PMaterial/24/places/"
Invalid Context= "Mimetypes" line for icon theme:  "/usr/share/icons/PMaterial/24/mimetypes/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/PMaterial/24/emotes/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/PMaterial/24/emblems/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/PMaterial/24/categories/"
Invalid Context= "Apps" line for icon theme:  "/usr/share/icons/PMaterial/24/apps/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/PMaterial/24/devices/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/PMaterial/24/status/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/PMaterial/24/actions/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/PMaterial/32/places/"
Invalid Context= "Mimetypes" line for icon theme:  "/usr/share/icons/PMaterial/32/mimetypes/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/PMaterial/32/emotes/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/PMaterial/32/emblems/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/PMaterial/32/categories/"
Invalid Context= "Apps" line for icon theme:  "/usr/share/icons/PMaterial/32/apps/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/PMaterial/32/devices/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/PMaterial/32/status/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/PMaterial/32/actions/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/PMaterial/48/places/"
Invalid Context= "Mimetypes" line for icon theme:  "/usr/share/icons/PMaterial/48/mimetypes/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/PMaterial/48/emotes/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/PMaterial/48/emblems/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/PMaterial/48/categories/"
Invalid Context= "Apps" line for icon theme:  "/usr/share/icons/PMaterial/48/apps/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/PMaterial/48/devices/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/PMaterial/48/status/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/PMaterial/48/actions/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/PMaterial/64/places/"
Invalid Context= "Mimetypes" line for icon theme:  "/usr/share/icons/PMaterial/64/mimetypes/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/PMaterial/64/emotes/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/PMaterial/64/emblems/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/PMaterial/64/categories/"
Invalid Context= "Apps" line for icon theme:  "/usr/share/icons/PMaterial/64/apps/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/PMaterial/64/devices/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/PMaterial/64/status/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/PMaterial/64/actions/"
Invalid Context= "Mimetypes" line for icon theme:  "/usr/share/icons/PMaterial/scalable/mimetypes/"
Invalid Context= "Apps" line for icon theme:  "/usr/share/icons/PMaterial/scalable/apps/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/Puppy Flat/16/places/"
Invalid Context= "Mimetypes" line for icon theme:  "/usr/share/icons/Puppy Flat/16/mimetypes/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/Puppy Flat/16/emblems/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/Puppy Flat/16/categories/"
Invalid Context= "Apps" line for icon theme:  "/usr/share/icons/Puppy Flat/16/apps/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/Puppy Flat/16/devices/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/Puppy Flat/16/status/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/Puppy Flat/16/actions/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/Puppy Flat/22/places/"
Invalid Context= "Mimetypes" line for icon theme:  "/usr/share/icons/Puppy Flat/22/mimetypes/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/Puppy Flat/22/emblems/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/Puppy Flat/22/categories/"
Invalid Context= "Apps" line for icon theme:  "/usr/share/icons/Puppy Flat/22/apps/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/Puppy Flat/22/devices/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/Puppy Flat/22/status/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/Puppy Flat/22/actions/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/Puppy Flat/24/places/"
Invalid Context= "Mimetypes" line for icon theme:  "/usr/share/icons/Puppy Flat/24/mimetypes/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/Puppy Flat/24/emblems/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/Puppy Flat/24/categories/"
Invalid Context= "Apps" line for icon theme:  "/usr/share/icons/Puppy Flat/24/apps/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/Puppy Flat/24/devices/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/Puppy Flat/24/status/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/Puppy Flat/24/actions/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/Puppy Flat/32/places/"
Invalid Context= "Mimetypes" line for icon theme:  "/usr/share/icons/Puppy Flat/32/mimetypes/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/Puppy Flat/32/emblems/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/Puppy Flat/32/categories/"
Invalid Context= "Apps" line for icon theme:  "/usr/share/icons/Puppy Flat/32/apps/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/Puppy Flat/32/devices/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/Puppy Flat/32/status/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/Puppy Flat/32/actions/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/Puppy Flat/48/places/"
Invalid Context= "Mimetypes" line for icon theme:  "/usr/share/icons/Puppy Flat/48/mimetypes/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/Puppy Flat/48/emblems/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/Puppy Flat/48/categories/"
Invalid Context= "Apps" line for icon theme:  "/usr/share/icons/Puppy Flat/48/apps/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/Puppy Flat/48/devices/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/Puppy Flat/48/status/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/Puppy Flat/48/actions/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/Puppy Flat/64/places/"
Invalid Context= "Mimetypes" line for icon theme:  "/usr/share/icons/Puppy Flat/64/mimetypes/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/Puppy Flat/64/emblems/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/Puppy Flat/64/categories/"
Invalid Context= "Apps" line for icon theme:  "/usr/share/icons/Puppy Flat/64/apps/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/Puppy Flat/64/devices/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/Puppy Flat/64/status/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/Puppy Flat/64/actions/"
Invalid Context= "Mimetypes" line for icon theme:  "/usr/share/icons/Puppy Flat/scalable/mimetypes/"
Invalid Context= "Apps" line for icon theme:  "/usr/share/icons/Puppy Flat/scalable/apps/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/Puppy Standard/16/places/"
Invalid Context= "Mimetypes" line for icon theme:  "/usr/share/icons/Puppy Standard/16/mimetypes/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/Puppy Standard/16/emblems/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/Puppy Standard/16/categories/"
Invalid Context= "Apps" line for icon theme:  "/usr/share/icons/Puppy Standard/16/apps/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/Puppy Standard/16/devices/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/Puppy Standard/16/status/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/Puppy Standard/16/actions/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/Puppy Standard/22/places/"
Invalid Context= "Mimetypes" line for icon theme:  "/usr/share/icons/Puppy Standard/22/mimetypes/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/Puppy Standard/22/emblems/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/Puppy Standard/22/categories/"
Invalid Context= "Apps" line for icon theme:  "/usr/share/icons/Puppy Standard/22/apps/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/Puppy Standard/22/devices/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/Puppy Standard/22/status/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/Puppy Standard/22/actions/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/Puppy Standard/24/places/"
Invalid Context= "Mimetypes" line for icon theme:  "/usr/share/icons/Puppy Standard/24/mimetypes/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/Puppy Standard/24/emblems/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/Puppy Standard/24/categories/"
Invalid Context= "Apps" line for icon theme:  "/usr/share/icons/Puppy Standard/24/apps/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/Puppy Standard/24/devices/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/Puppy Standard/24/status/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/Puppy Standard/24/actions/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/Puppy Standard/32/places/"
Invalid Context= "Mimetypes" line for icon theme:  "/usr/share/icons/Puppy Standard/32/mimetypes/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/Puppy Standard/32/emblems/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/Puppy Standard/32/categories/"
Invalid Context= "Apps" line for icon theme:  "/usr/share/icons/Puppy Standard/32/apps/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/Puppy Standard/32/devices/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/Puppy Standard/32/status/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/Puppy Standard/32/actions/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/Puppy Standard/48/places/"
Invalid Context= "Mimetypes" line for icon theme:  "/usr/share/icons/Puppy Standard/48/mimetypes/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/Puppy Standard/48/emblems/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/Puppy Standard/48/categories/"
Invalid Context= "Apps" line for icon theme:  "/usr/share/icons/Puppy Standard/48/apps/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/Puppy Standard/48/devices/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/Puppy Standard/48/status/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/Puppy Standard/48/actions/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/Puppy Standard/64/places/"
Invalid Context= "Mimetypes" line for icon theme:  "/usr/share/icons/Puppy Standard/64/mimetypes/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/Puppy Standard/64/emblems/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/Puppy Standard/64/categories/"
Invalid Context= "Apps" line for icon theme:  "/usr/share/icons/Puppy Standard/64/apps/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/Puppy Standard/64/devices/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/Puppy Standard/64/status/"
Invalid Type= "fixed" line for icon theme:  "/usr/share/icons/Puppy Standard/64/actions/"
Invalid Context= "Mimetypes" line for icon theme:  "/usr/share/icons/Puppy Standard/scalable/mimetypes/"
Invalid Context= "Apps" line for icon theme:  "/usr/share/icons/Puppy Standard/scalable/apps/"
"Session bus not found\nTo circumvent this problem try the following command (with Linux and bash)\nexport $(dbus-launch)"

01micko · Post by **01micko** » Sun Jan 31, 2021 2:24 am

zigbert wrote: ↑Sat Jan 30, 2021 9:55 am
Installing from PPM works fine, but not able to uninstall app afterwards. Clicking the uninstall button shows an empty list.

Hmmmm... works ok here

: ppm-uninstall.jpg (68.84 KiB) Viewed 2893 times

Trying to run the kdenlive appimage from their homepage

I'm downloading it now. I'll try to debug.

Cheers!

EDIT:

I can get past the dbus error

Code: Select all

export $(dbus-launch)
./kdenlive-20.12.1b-x86_64.appimage

But... it starts up then segfaults. It seems ffmpeg is too old, SDL2 is missing, (the reason I stuck with old ffmpeg, so not to drag in sdl2), there is a gstreamer issue (we don't have it) , no libjack ... and to top it off there is an XCB error! I don't know where to start to fix all that. Sorry!

HerrBert · Post by **HerrBert** » Sun Jan 31, 2021 5:09 pm

Hello.

xorgwizard doesn't start

Code: Select all

/usr/sbin/xorgwizard: line 667: [: !=: unary operator expected

can be fixed by adding doublequotes around $(which xscreensaver)

BUT:
if you have installed langpack_de-20150419.pet, in its .mo file there are doublequotes in msgstr "<b>Bildschirm-Feineinstellung</b> hängt vom geladenen Video-/Grafik-Treiber ab, also falls die Auflösung nicht korrekt ist, den Reiter "Fortgeschritten" checken..." which leads to

Code: Select all

** (gtkdialog:28467): ERROR **: gtkdialog: Error in line 15, near token 'string': syntax error

/usr/sbin/xorgwizard: line 731: 28467 Trace/Breakpoint ausgelöst   gtkdialog --center --program=MAIN1

So if you have fixed /usr/sbin/xorgwizard you can start it from commandline with

Code: Select all

LANG=C xorgwizard

dimkr · Post by **dimkr** » Mon Feb 01, 2021 2:06 pm

HerrBert wrote: ↑Sun Jan 31, 2021 5:09 pm
Hello.

xorgwizard doesn't start
Code: Select all
/usr/sbin/xorgwizard: line 667: [: !=: unary operator expected
can be fixed by adding doublequotes around $(which xscreensaver)

Fixed in https://github.com/puppylinux-woof-CE/woof-CE/pull/2019, the fix will be part of the next Slacko.

Sage · Post by **Sage** » Tue Feb 02, 2021 2:27 pm

How to achieve an old-fashioned 'FULL' installation to an equally old rotating HD from an old-technology CD-RW?

zigbert · Post by **zigbert** » Tue Feb 02, 2021 8:46 pm

01micko wrote: ↑Sun Jan 31, 2021 2:24 am
zigbert wrote: ↑Sat Jan 30, 2021 9:55 am
Installing from PPM works fine, but not able to uninstall app afterwards. Clicking the uninstall button shows an empty list.

Hmmmm... works ok here

It works when restarting PPM. I tried to uninstall apps in the same session of PPM. My fault. Sorry!

+Me · Post by **+Me** » Tue Feb 02, 2021 11:08 pm

G'day 01Micko, Welcome to 2021 All,
iz there anything I can do 2 Fix the Failures of Texture_from_PixMap, non power of two support & FBConfig on X64 bit Slacko 7.0?
Running on a 7 year old 11" HP Pavilion TouchSmart NetBook w/ 4 GB RAMemory

Of course I've already Searched in vain the Forum & the iNet 4 answers. This has been a 6 year Promise 2 me Daughter that Loves Compiz " Jelly " Linux, She's Starting intermediate Skool Next week & I Really want Her 2 have an Attractive alternative 2 a Crappy Spying Google KromeBook or M$ Virus Bait WinDoze that she's drifted 2wards since She was Happily Using grays Old Tipsy Puppy.

Please Help!

;-)K

zigbert · Post by **zigbert** » Wed Feb 03, 2021 9:48 pm

Just giving a brief report of the journey to replace my old system with the new Tuxedo laptop. AMD Ryzen 7 4800H and Nvidia 1650 TI

- Boot with usb-stick (fbdev) - no wifi, no touchpad, no brightness adjustment of screen, no backlight of laptop keyboard, no hdmi
- Upgrade to kernel 5.4.86 (from 4.19). Wifi ok, touchpad ok
- Disable noveau driver
- Install Nvidia driver. Hdmi ok, no laptop monitor
- Grub default boots Slacko 7 with nvidia to external monitor (normal startx)
- Extra Grub option with pfix=nox and execute an alternative startx with vesa driver for laptop monitor
- Appimages - Gimp, Inkscape, ... Make executable links in /usr/bin/ and *.desktiop files to integrate properly
- Turn of acpi boot service to allow turning off laptop monitor when using external monitor. Using boot parameter acpi=off resulting no wifi
- Select the correct sound card in the sound card wizard (sound was directed to hdmi)
- Install redshiftgui (PPM) to improve monitor brightness adjustment. Works only for external monitor

It has now become a really impressive system for my daily workload.

Issues to work with...
- Monitor uses correct resolution by 2560x1440, but refreshrate refuses to work with 75 Hz. Only 60 Hz is used.
- Adjusting laptop monitor brightness and the backlight of laptop keyboard doesn't work. Next kernel upgrade will be interesting.

These are minors... let's work!

Thank you @01micko for this excellent OS!

Post by **bigpup** » Thu Feb 04, 2021 2:29 pm

Booting problem that seems to be bug with the provided boot loaders used to make a live install.
viewtopic.php?p=16731#p16731

zigbert · Post by **zigbert** » Thu Feb 04, 2021 8:40 pm

@davids45
Working on an update of pWidgets for Slacko 7 (and others)...
I haven't been using pWidgets for some time, and wonder if there are any issues that have been improved or should be improved?

Changelog 2.5.10 (so far)
- Include libjpeg (32bit / 64bit) and libpng12 (64bit) for xonlclock to work
- Birthday: Update widget to be a more general reminder
- Calendar: Fix spacing in monday-configuration
- Battery_bar: New widget to fit together with Ram_bar and Cpu_bar
- Space_drives: Use label of partition if exist

Post by **bigpup** » Thu Feb 04, 2021 8:53 pm

zigbert, have you looked at the Pwidgets topic in the forum?
viewtopic.php?f=95&t=322

Maybe you need to start your own topic or somehow take that one over.

davids45 · Post by **davids45** » Thu Feb 04, 2021 11:07 pm

G'day zigbert,

By coincidence, I'm running a 32-bit Slacko7 this morning so have taken a shot of my current pwidgets.

Over the years, I think I've had most 'trouble' with CPU temps, wireless and weather widgets. I could post a config file of any you'd like to see from my slacko shot. I'm not sure if the pwidgets weather is actually working - looks about right but that may just be a coincidence .

I've had to switch to 'pure' conky for 64-bit Pups as the pwidgets did not often behave for me. Not that I really know what I'm doing in conky, or in pwidgets as well. Just fiddle with the text or configs and trial-and-error until it works as I want. Or give up . No idea for weather in conky-64 but I can usually look out the window .

David S.

zigbert · Post by **zigbert** » Sat Feb 06, 2021 6:21 pm

davids45 wrote: ↑Thu Feb 04, 2021 11:07 pm
I've had to switch to 'pure' conky for 64-bit Pups as the pwidgets did not often behave for me.

I have put together this test-build of 2.5.10 64-bit. Try it if you like...

Puppy Linux Discussion Forum

Slacko Puppy 7.0

Re: Slacko Puppy 7.0

Re: Slacko Puppy 7.0

Re: Slacko Puppy 7.0

Re: Slacko Puppy 7.0

Re: Slacko Puppy 7.0

Re: Slacko Puppy 7.0

Re: Slacko Puppy 7.0

Re: Slacko Puppy 7.0

Re: Slacko Puppy 7.0

Re: Slacko Puppy 7.0

Re: Slacko Puppy 7.0

Re: Slacko Puppy 7.0

Re: Slacko Puppy 7.0

Re: Slacko Puppy 7.0

Re: Slacko Puppy 7.0

Re: Slacko Puppy 7.0

Re: Slacko Puppy 7.0

Re: Slacko Puppy 7.0

Re: Slacko Puppy 7.0

Slacko64 7.0: xorgwizard doesn't start

Re: Slacko64 7.0: xorgwizard doesn't start

Re: Slacko Puppy 7.0

Re: Slacko Puppy 7.0

Please Help me Understand Compiz_Helper Results

Re: Slacko Puppy 7.0

Re: Slacko Puppy 7.0

Re: Slacko Puppy 7.0

Re: Slacko Puppy 7.0

Re: Slacko Puppy 7.0 - pwidgets

Re: Slacko Puppy 7.0 - pwidgets