bluetooth 5.3 (any possibility to install in f96ce?)

[pp4mnklinux]

Today my daugther make me a present.
Mercurys USB bluetooth 5.3

Nano USB adapter

MA530

Is there any possibility of use it in puppy linux??
Any driver to install it?

Thanks in advance.

https://www.mercusys.com/en/download/ma530//

n.b.- It says only for WinShit... but I imagine there is some possibitily to use it with linux, isn't it?

[rockedge]

@pp4mnklinux

Often in the past I have been able to extract one way or another a Windows driver for some device, stuff it into a Puppy Linux to find out it works.

You can try this rtl8761bu_fw.bin extracted from the Windows driver and compressed with zstd for the Linux kernel.

Download, remove the the fake "gz" from the name and replace /lib/firmware/rtl_bt/rtl8761bu_fw.bin.zst with the renamed download. Then plug in the dongle and see if it is recognized.

Might need a reboot, I am not sure about it any of this i can't test it.

[pp4mnklinux]

Thanks @rockedge for your answer.

The problem is that I am working with the modded version of f96ce, so I haven't got the .zst file, so I can't replace the file.

The problem must be there, but I am trying with DevuanPup, EasyOs, Windows 7 and the connection fail with all of them.

I can connect my earphones with my Android Phone, but it is impossible (now) with my PC.

Thanks a lot (any other suggestions are welcome)

Have a nice weekend u all.

CHEERS.

@BarryK Have u got any suggestion for EasyOs¿??

[Jasper]

Extract-using-zstd.png (213.82 KiB) Viewed 855 times

Then use the new file which will not have the ZST extension.

extracted-file.png (10.74 KiB) Viewed 849 times

[rockedge]

If the directory /lib/firmware/rtl_bt is missing create it and then using Jasper's advice use the decompressed rtl8761bu_fw.bin by placing in the directory and see if that works........

[pp4mnklinux]

Thanks for your help, I'll try tomorrow. With my puppylinux I can decompress zst files.

This comand (zstd) is not found.

Is there any chance to send me the file without compression ¿?¿?

[rockedge]

@pp4mnklinux
here is the driver decompressed from zstd. Remove the fake ".gz" extension from the file name.

[pp4mnklinux]

Thanks for your help @rockedge , I followed your instructions but my usb doesn't work.

I will try other methods.

Thanks for your interest.

Cheers.

[Jasper]

Connect the USB device and then in terminal check to see if it is recognised.

List-Connected-USB-Devices.png (138.93 KiB) Viewed 739 times

[pp4mnklinux]

Hi @Jasper :

I run this comand - lsusb- with the usb bluetooth plugged in and without it.

The results are in this attached capture.

As You can see, appears a connection (marked with a arrow), but it is not identified as MERCURYS.

I installed @rockedge driver, but it is not identified.

Thanks

NOTE.- What are these two files you attached to your post?

Have a nice day.

[Jasper]

List-only-wireless-USB-devices.png (167.05 KiB) Viewed 695 times

Identify-USB-device-by-ID.png (359.98 KiB) Viewed 692 times

[Jasper]

List of USB ID's

http://www.linux-usb.org/usb.ids

Look for this firmware file:

RTL8192EU

[mikewalsh]

I run this comand - lsusb- with the usb bluetooth plugged in and without it.

The results are in this attached capture.

As You can see, appears a connection (marked with a arrow), but it is not identified as MERCURYS.

@pp4mnklinux :-

It's most likely a generic, 'no-name' device, manufactured by some anonymous electronics company who could be anywhere in the Far East. Any other electronics firm that wants one on their stock list will buy 'em, have their own name printed on them, and sell the item AS theirs. Very common practice now.

Almost anything you can think of these days will have a cheap, 'generic', no-name equivalent available somewhere on the market. It's "badge engineering" in action...

I've come across this a LOT over the last 2 decades, though more so in recent years...

Mike.

[Jasper]

Compile it yourself from here:

Realtek rtl8192eu official Linux driver v5.11.2.1

This driver is based on the (latest) official and manufacturer supported Realtek v5.11.2.1 driver with fixes and improvements to support the latest kernels (>=5, up to 6.14).

https://github.com/clnhub/rtl8192eu-linux

Or download the latest firmware collections from here:

https://git.kernel.org/pub/scm/linux/ke ... rmware.git

linux-firmware.png (216.31 KiB) Viewed 665 times

[Jasper]

Celebrated too soon

[pp4mnklinux]

Thanks a lot for your help, but I downloaded the latest firmware collections from https://git.kernel.org/pub/scm/linux/ke ... rmware.git updating my folder (see capt) restarted the system but nothing happens, so I imagine it will demand a lot of time to make it works.

Thanks again for your help.- Have a nice day.

[Jasper]

I can see the firmware file I suggested is present in the directory.

Loaded-firmware.png (52.89 KiB) Viewed 576 times

Have you tried changing the kernel to a newer build? ........ 6.5 and above

The build should be marked "Non-usrmerge"

search.php?keywords=non-usrmerge&terms= ... mit=Search

[Jasper]

Sorry, the firmware I mentioned above is for WiFi not Bluetooth .............Oops

Identify-bluetooth-device.png (230.28 KiB) Viewed 557 times

[pp4mnklinux]

@Jasper

Have you tried changing the kernel to a newer build? ........ 6.5 and above

That's my next option, but I am worried about problems with f96ce_xfce_fusilli. If @rockedge didn't update f96ce Kernel (I think it is using 6.0.12) there should be some reason....I think.

Thanks for your help, but don't waste your time trying to help me.... It needs a lot of work.

THANKS

[rockedge]

@pp4mnklinux there should be no problems upgrading or just changing the kernel in F96-CE as long it is a "huge" kernel and is in the non-usrmerge structure format.
/lib/module and /lib/firmware not /usr/lib/module and /usr/lib/firmware. Although I have taken usrmerge kernel components and made copies in non-usrmerge format.

I have not changed the kernel in the original ISO image because F96-CE was designed and built to be a bridge until a newer "mainline" Ubuntu based Puppy Linux was ready to take Fossapup64's place.