Bookworm Build script

[gumanzoy]

@fredx181

Hi

I am sorry. I forget to keep dm-crypt.ko in initrd in last patch.

Need modify /usr/local/cr-initrd/mkinitrd

Code: Select all

 copy_including_deps /$LMK/kernel/drivers/md/md-mod.*
+copy_including_deps /$LMK/kernel/drivers/md/dm-crypt.*

It used for changes=
As i see in linuxrc code

Code: Select all

elif [ $CHANGES ]; then
    echo $i"setting up directory for changes"
    CHNEXIT=`echo $CHANGES | cut -d: -f1`; 
    [ $CHNEXIT = EXIT ] && CHANGES=`echo $CHANGES | cut -d: -f2-`
    [ $CHNEXIT = +EXIT ] && CHANGES=`echo $CHANGES | cut -d: -f2-`   
    
    [ -r $CFGDEV/$CHANGES ] && { DEV=`echo $CFGDEV | sed s@/mnt/@@`; LPTH=$CHANGES; } || locate -r $CHANGES
    if [ $? -eq 0 ]; then
	if [ -d /mnt/$DEV/$LPTH ]; then
	    mkdir -p /mnt/$DEV/$LPTH/changes 2>/dev/null && \
	    mount -o bind /mnt/$DEV/$LPTH/changes /memory/changes && touch /memory/changes/._test1 2>/dev/null
	else
	    if blkid /mnt/$DEV/$LPTH 2>/dev/null | cut -d" " -f3- | grep -q _LUKS; then
		for x in dm_crypt cryptd cbc sha256_generic aes_generic aes_x86_64; do modprobe $x 2>/dev/null; done
		losetup /dev/loop2 /mnt/$DEV/$LPTH
		echo $i"found encrypted .dat container"
		cryptsetup luksOpen /dev/loop2 crypt
		fsck_dat /dev/mapper/crypt
		mount /dev/mapper/crypt /memory/changes 2>/dev/null && touch /memory/changes/._test1 2>/dev/null

But i never use it. Can you test it with new initrd.

Another crypto modules copied as before. I don't touch it.
copy_including_deps /$LMK/kernel/crypto

[fredx181]

I am sorry. I forget to keep dm-crypt.ko in initrd in last patch.

Need modify /usr/local/cr-initrd/mkinitrd
...
+copy_including_deps /$LMK/kernel/drivers/md/dm-crypt.*

Ah, ok, no problem.
Tested and indeed encrypted savefile is not working without dm-crypt.*
With it, it works again, although very slow I must say (takes around 20 sec to continue after entering the password for encryption) well ... anyway it works.

Made the changes just now, i.e. latest upgrade-kernel v1.18.0 and the dog-boot-.... archives in MakeLive repo updated.

[dancytron]

What would it take to make a version, probably a systemd version, with no "run as user"?

Everything runs as root (or doesn't run) when you are root and everything runs like normal debian when using a regular user.

[fredx181]

What would it take to make a version, probably a systemd version, with no "run as user"?

Everything runs as root (or doesn't run) when you are root and everything runs like normal debian when using a regular user.

If I understand well, I'd say place some .desktop launchers for applications that won't run as root by default in /root/.local/share/applications.
These will show only from root login in the Menu. Modify the Exec= line to run with e.g. --no-sandbox .
When doing a build, it can be done manually in the 'chroot'.
But that's only for what appears in the Menu, probably you mean more (as you say "everything", also stuff like pulseaudio start etc...).

[dancytron]

What would it take to make a version, probably a systemd version, with no "run as user"?

Everything runs as root (or doesn't run) when you are root and everything runs like normal debian when using a regular user.

If I understand well, I'd say place some .desktop launchers for applications that won't run as root by default in /root/.local/share/applications.
These will show only from root login in the Menu. Modify the Exec= line to run with e.g. --no-sandbox .
When doing a build, it can be done manually in the 'chroot'.
But that's only for what appears in the Menu, probably you mean more (as you say "everything", also stuff like pulseaudio start etc...).

Yes, by "everything", I mean pipewire and wireplumber. I would probably not use pulse audio.

[fredx181]

This works for me as a Startup script with root and user login:

Code: Select all

    pipewire &
    pipewire-pulse &
    wireplumber &

Don't know about systemd (edit: well, remember now, see next post), could be that for user login the systemd service will provide starting it, so then the above only for root login.

[fredx181]

@dancytron
Almost forgot: see EDIT here (about systemd starting wireplumber) viewtopic.php?p=129207#p129207

[dancytron]

Let me build one and I'll tell you where I get stuck.

Probably a couple of days.

Dan

edit: well, more than a couple of days.

[gumanzoy]

@fredx181

Hi

I build libpng12-0_1.2.59-1_amd64.deb and libpng12-0_1.2.59-1_i386.deb for Debian 12
Not conflict with usr-is-merged package

I upload deb's and deb-src to GoogleDrive libpng_1.2.59_deb12

You can upload it to GitHub repo's if you want.

[gumanzoy]

@fredx181

Thanks

Screenshot_2024-12-13_15-15-12.png (128.88 KiB) Viewed 17792 times

From now i don't need to add code to mklive-bookworm to download and install libpng12_i386.deb
Just add libpng12-0:i386 in mklive-bookworm64-xfce-gumanzoy.conf should work.

[gumanzoy]

@fredx181

Hi

I found 2 sources of
/root/.config/gtk-2.0/gtkfilechooser.ini
/home/puppy/.config/gtk-2.0/gtkfilechooser.ini

Files from
wget --no-check-certificate https://raw.githubusercontent.com/DebianDog/MakeLive/gh-pages/dog-boot-bookworm-20221013.tar.gz

Overwritten by zz_xfce_config.squashfs
[ "$DE_CONFIG" = "Xfce4" ] && wget --no-check-certificate -P squash -r -e robots=off -nd -l1 -A "*squashfs" https://debiandog.github.io/MakeLive/modules-bookworm/xfce4/ && unsquashfs -f -d chroot squash/*.squashfs; rm -rf squash

dog-boot-bookworm-20221013.tar.gz version

Code: Select all

[Filechooser Settings]
LocationMode=path-bar
ShowHidden=false
ShowSizeColumn=true
GeometryX=0
GeometryY=170
GeometryWidth=840
GeometryHeight=630
SortColumn=name
SortOrder=ascending
StartupMode=recent

zz_xfce_config.squashfs version

Code: Select all

[Filechooser Settings]
LocationMode=path-bar
ShowHidden=false
ShowSizeColumn=true
GeometryX=-1
GeometryY=-1
GeometryWidth=-1
GeometryHeight=-1
SortColumn=name
SortOrder=ascending
StartupMode=recent

[fredx181]

@fredx181

Hi

I found 2 sources of
/root/.config/gtk-2.0/gtkfilechooser.ini
/home/puppy/.config/gtk-2.0/gtkfilechooser.ini

...

The zz_.....squashfs modules have in some cases the purpose to override the settings from dog-boot-bookworm-20221013.tar.gz
But to be honest I don't remember about this specific one, is there a problem ?

[gumanzoy]

The zz_.....squashfs modules have in some cases the purpose to override the settings from dog-boot-bookworm-20221013.tar.gz
But to be honest I don't remember about this specific one, is there a problem ?

I read topic about org.gtk.Settings.FileChooser window-size
viewtopic.php?p=135017#p135017

I think files in dog-boot-bookworm-20221013.tar.gz updated for fix this problem.
But now i double check and gtk2 and gtk3 FileChooser sizes different.
gtk2 FileChooser dialog size ok with both of gtk-2.0/gtkfilechooser.ini variants.

But need to reduce gtk3 FileChooser window size for root user. Same as for puppy /home/puppy/.config/dconf
And i wish to enable "Sort folders before files" by default.

gsettings is strange thing. Can not edit this as .ini file.

[fredx181]

@gumanzoy
If I understand well, adding .config/dconf/user for root and puppy (setting with much smaller filechooser and folders show first) in dog-boot-bookworm-20221013.tar.gz should do.
Is that what you propose ? And show hidden files too ?

[gumanzoy]

If I understand well, adding .config/dconf/user for root and puppy (setting with much smaller filechooser and folders show first) in dog-boot-bookworm-20221013.tar.gz should do.
Is that what you propose ? And show hidden files too ?

Yes.

But i don't know how to create .config/dconf/user this this settings.

[fredx181]

If I understand well, adding .config/dconf/user for root and puppy (setting with much smaller filechooser and folders show first) in dog-boot-bookworm-20221013.tar.gz should do.
Is that what you propose ? And show hidden files too ?

Yes.

But i don't know how to create .config/dconf/user this this settings.

It's created or modified (if exists) by changing e.g. the gtk3 filechooser size or other setting.
I did that from booted system and added now to dog-boot-bookworm-20221013.tar.gz, tested with new xfce4 minimal build and works ok (e.g. filechooser size is around 700x500)

[gumanzoy]

@fredx181

Thanks.

I fix /etc/xdg/menus/xfce-applications.menu

Code: Select all

<!DOCTYPE Menu PUBLIC "-//freedesktop//DTD Menu 1.0//EN"
  "http://www.freedesktop.org/standards/menu-spec/1.0/menu.dtd">

<Menu>
    <Name>Xfce</Name>

<DefaultAppDirs/>
<DefaultDirectoryDirs/>
<DefaultMergeDirs/>

<Include>
    <Category>X-Xfce-Toplevel</Category>
</Include>

<Layout>
      <Filename>Create-module-from-changes.desktop</Filename> 
      <Filename>Create Savefile.desktop</Filename> 
     <Filename>audio-setup.desktop</Filename>  
    <Filename>Remaster-DDog.desktop</Filename>
    <Filename>DDog-Installer.desktop</Filename>
    <Filename>Add-new-user.desktop</Filename>
    <Filename>xfce4-run.desktop</Filename>
    <Separator/>
    <Filename>xfce4-terminal-emulator.desktop</Filename>
    <Filename>xfce4-file-manager.desktop</Filename>
    <Filename>xfce4-mail-reader.desktop</Filename>
    <Filename>xfce4-web-browser.desktop</Filename>
    <Separator/>
    <Menuname>Settings</Menuname>
    <Separator/>
    <Merge type="all"/>
    <Separator/>
    <Filename>xfhelp4.desktop</Filename>
    <Filename>xfce4-about.desktop</Filename>
    <Filename>logout.desktop</Filename>
</Layout>
<Menu>
    <Name>Module Tools</Name>
    <Directory>xfce-modules.directory</Directory>
    <Include>
        <Category>Modules</Category>
    </Include>
</Menu>

<Menu>
    <Name>Settings</Name>
    <Directory>xfce-settings.directory</Directory>
    <Include>
        <Category>Settings</Category>
    </Include>

    <Layout>
        <Filename>xfce-settings-manager.desktop</Filename>
        <Separator/>
        <Merge type="all"/>
    </Layout>

    <Menu>
        <Name>Screensavers</Name>
        <Directory>xfce-screensavers.directory</Directory>
        <Include>
            <Category>Screensaver</Category>
        </Include>
    </Menu>
</Menu>

<Menu>
    <Name>Accessories</Name>
    <Directory>xfce-accessories.directory</Directory>
    <Include>
        <Or>
            <Category>Accessibility</Category>
            <Category>Core</Category>
            <Category>Legacy</Category>
            <Category>Utility</Category>
        </Or>
    </Include>
    <Exclude>
        <Or>
            <Filename>exo-file-manager.desktop</Filename>
            <Filename>exo-terminal-emulator.desktop</Filename>
            <Filename>xfce4-about.desktop</Filename>
            <Filename>xfrun4.desktop</Filename>
        </Or>
    </Exclude>
</Menu>

<Menu>
    <Name>Development</Name>
    <Directory>xfce-development.directory</Directory>
    <Include>
        <Category>Development</Category>
    </Include>
</Menu>

<Menu>
    <Name>Education</Name>
    <Directory>xfce-education.directory</Directory>
    <Include>
        <Category>Education</Category>
    </Include>
</Menu>

<Menu>
    <Name>Games</Name>
    <Directory>xfce-games.directory</Directory>
    <Include>
        <Category>Game</Category>
    </Include>
</Menu>

<Menu>
    <Name>Graphics</Name>
    <Directory>xfce-graphics.directory</Directory>
    <Include>
        <Category>Graphics</Category>
    </Include>
</Menu>

<Menu>
    <Name>Multimedia</Name>
    <Directory>xfce-multimedia.directory</Directory>
    <Include>
        <Category>Audio</Category>
        <Category>Video</Category>
        <Category>AudioVideo</Category>
    </Include>
</Menu>

<Menu>
    <Name>Network</Name>
    <Directory>xfce-network.directory</Directory>
    <Include>
        <Category>Network</Category>
    </Include>
    <Exclude>
        <Or>
            <Filename>exo-mail-reader.desktop</Filename>
            <Filename>exo-web-browser.desktop</Filename>
        </Or>
    </Exclude>
</Menu>

<Menu>
    <Name>Office</Name>
    <Directory>xfce-office.directory</Directory>
    <Include>
        <Category>Office</Category>
    </Include>
</Menu>

<Menu>
    <Name>System</Name>
    <Directory>xfce-system.directory</Directory>
    <Include>
        <Or>
            <Category>Emulator</Category>
            <Category>System</Category>
        </Or>
    </Include>
    <Exclude>
        <Or>
            <Filename>logout.desktop</Filename>
        </Or>
    </Exclude>
</Menu>

<Menu>
    <Name>Other</Name>
    <Directory>xfce-other.directory</Directory>
    <OnlyUnallocated/>
    <Include>
        <All/>
    </Include>
</Menu>

<Exclude>
    <Or>
        <Filename>xfce4-session-logout.desktop</Filename>
        <Filename>Remaster-DebianDog.desktop</Filename>
    </Or>
</Exclude>

</Menu>

Current: (apps mixed with categories)

xfce-applications-current.png (102.18 KiB) Viewed 17598 times

Fixed:

xfce-applications-fixed.png (105.97 KiB) Viewed 17598 times

Don't care about "HWMon Tools" category on screenshot. It is inserted only in my build.
And not showing without these files.
/etc/xdg/menus/applications-merged/HWMon.menu
/usr/share/desktop-directories/HWMon.directory

Can you update zz_xfce_config.squashfs with xfce-applications.menu ?

---

EDIT.

But i don't know how to create .config/dconf/user this this settings.

It's created or modified (if exists) by changing e.g. the gtk3 filechooser size or other setting.

I know that is creating or modifying at run time. But it is contains many settings for other gtk3 apps currently running in system.
I just curious how to create .config/dconf/user only with settings for org.gtk.Settings.FileChooser
And not define any other desktop apps settings. To leave it as upstream default.

[fredx181]

@fredx181
...
...
Can you update zz_xfce_config.squashfs with xfce-applications.menu ?

OK, done now.

But i don't know how to create .config/dconf/user this this settings.

It's created or modified (if exists) by changing e.g. the gtk3 filechooser size or other setting.

I know that is creating or modifying at run time. But it is contains many settings for other gtk3 apps currently running in system.
I just curious how to create .config/dconf/user only with settings for org.gtk.Settings.FileChooser
And not define any other desktop apps settings. To leave it as upstream default.

Ah ok. I don't know exactly either, some useful info in the thread perhaps ? https://forum.puppylinux.com/viewtopic. ... 17#p135017
edit : using dconf-editor may be the easiest but also at run time only.

[dancytron]

Let me build one and I'll tell you where I get stuck.

Probably a couple of days.

Dan

edit: well, more than a couple of days.

I'm back. Sorry it took so long.

I think I manually created what I think I want with the following steps. (running pipewire and wireplumber as root and thus being able to use bluetooth without breaking things/security.

1. Created a systemd DD with alsa and pipewire-setup.

2. Added my hack to allow pipewire to run as root viewtopic.php?t=9448.
3. Booted.

Code: Select all

killall pipewire
killall wireplumber
killall pipewire-pulse

4. open 2 separate root terminal windows (pipewire seems to load pipewire-pulse).

Code: Select all

pipewire
wireplumber

5. Test sound with mpv. It works with pipewire, wireplumber, and pipewire-pulse all running as root.
6. killall again.
7. install blueman, bluez, bluetooth (meta package), libcamera, libspa-0.2-bluetooth.
8. restart 2 terminal windows with pipewire and wireplumber.
9. open blueman. search for bluetooth speaker. Bluetooth works!!!!!!!!!!! (see screenshot).
10. save2flash and reboot. repeat killall and restarting in terminal windows. Sound and bluetooth still work with everything running as root.

So I guess what I would like to do is have all 3 just running as root when logged in as root without having to killall them and restart them.

2024-12-23-162321_1024_scrot.jpg (104.06 KiB) Viewed 17326 times

[fredx181]

I think I manually created what I think I want with the following steps. (running pipewire and wireplumber as root and thus being able to use bluetooth without breaking things/security.

1. Created a systemd DD with alsa and pipewire-setup.

If the pipewire-setup package is installed then pipewire runs as "user" (puppy), so I guess that's why you need to run the killall commands first before running as root.

2. Added my hack to allow pipewire to run as root

Down side of running pipewire as root is that you'll have no sound in a browser that's running as "user" , e.g. google-chrome (so needs to run with --no-sandbox).

So I guess what I would like to do is have all 3 just running as root when logged in as root without having to killall them and restart them.

Best (if I understand well), I think , to run as root is to uninstall the pipewire-setup package and just have installed pipewire, pipewire-pulse, pipewire-alsa, wireplumber (and reboot).

[dancytron]

Yes, I want to run as root and don't really use the run-as-user very much.

I think I'm almost there. All I have to do is get wireplumber to run on startup.

Built new one without pipewire-setup or run-as-user and with pipewire wireplumber bluetooth blueman libspa-0.2-bluetooth libcamera0.0.3 bluez.

Running the task manager, pipewire is running as root, but wireplumber is not running. Sound works, Bluetooth finds my speaker but fails to connect with the usual meaningless error message. /var/log/syslog and the systemd equivalent say

2024-12-24T17:21:34.772726+00:00 live wireplumber[1127]: Failed to connect to session bus: Unable to autolaunch a dbus-daemon without a $DISPLAY for X11
2024-12-24T17:21:34.773144+00:00 live pipewire[1126]: mod.rt: Failed to connect to session bus: Unable to autolaunch a dbus-daemon without a $DISPLAY for X11
2024-12-24T17:21:34.773296+00:00 live wireplumber[1127]: RTKit error: org.freedesktop.DBus.Error.ServiceUnknown
2024-12-24T17:21:34.773521+00:00 live wireplumber[1127]: could not set nice-level to -11: No such file or directory

. See below for full log.

Googling the error message had stuff about export environment variable etc I haven't had time to run down.

When I started wireplumber in a terminal, then bluetooth worked.

***********************************************

Details below.

*******************************************


In /var/log/syslog I found:

Code: Select all

 2024-12-24T17:21:34.772726+00:00 live wireplumber[1127]: Failed to connect to session bus: Unable to autolaunch a dbus-daemon without a $DISPLAY for X11
2024-12-24T17:21:34.773144+00:00 live pipewire[1126]: mod.rt: Failed to connect to session bus: Unable to autolaunch a dbus-daemon without a $DISPLAY for X11
2024-12-24T17:21:34.773296+00:00 live wireplumber[1127]: RTKit error: org.freedesktop.DBus.Error.ServiceUnknown
2024-12-24T17:21:34.773521+00:00 live wireplumber[1127]: could not set nice-level to -11: No such file or directory
2024-12-24T17:21:34.773592+00:00 live pipewire[1126]: mod.rt: RTKit error: org.freedesktop.DBus.Error.ServiceUnknown
2024-12-24T17:21:34.773655+00:00 live pipewire[1126]: mod.rt: could not set nice-level to -11: No such file or directory
2024-12-24T17:21:34.773731+00:00 live wireplumber[1127]: RTKit error: org.freedesktop.DBus.Error.ServiceUnknown
2024-12-24T17:21:34.773803+00:00 live pipewire[1126]: mod.rt: RTKit error: org.freedesktop.DBus.Error.ServiceUnknown
2024-12-24T17:21:34.773869+00:00 live systemd[1]: Starting smbd.service - Samba SMB Daemon...
2024-12-24T17:21:34.787709+00:00 live pipewire[1126]: spa.dbus: Failed to connect to session bus: Unable to autolaunch a dbus-daemon without a $DISPLAY for X11
2024-12-24T17:21:34.787891+00:00 live pipewire[1126]: mod.portal: Failed to connect to session bus: Input/output error
2024-12-24T17:21:34.793753+00:00 live wireplumber[1127]: RTKit error: org.freedesktop.DBus.Error.ServiceUnknown
2024-12-24T17:21:34.793912+00:00 live pipewire[1126]: mod.rt: RTKit error: org.freedesktop.DBus.Error.ServiceUnknown
2024-12-24T17:21:34.847318+00:00 live update-apparmor-samba-profile[1147]: grep: /etc/apparmor.d/samba/smbd-shares: No such file or directory
2024-12-24T17:21:34.862212+00:00 live wireplumber[1127]: Error acquiring bus address: Cannot autolaunch D-Bus without X11 $DISPLAY
2024-12-24T17:21:34.862726+00:00 live wireplumber[1127]: 0x5559df24dae0: leaked proxy 0x5559df2d7180 id:3
2024-12-24T17:21:34.862838+00:00 live wireplumber[1127]: disconnected from pipewire
2024-12-24T17:21:34.865815+00:00 live systemd[1111]: wireplumber.service: Main process exited, code=exited, status=70/SOFTWARE
2024-12-24T17:21:34.865944+00:00 live systemd[1111]: wireplumber.service: Failed with result 'exit-code'.
2024-12-24T17:21:34.888297+00:00 live update-apparmor-samba-profile[1156]: diff: /etc/apparmor.d/samba/smbd-shares: No such file or directory
2024-12-24T17:21:35.202763+00:00 live systemd[1]: Started smbd.service - Samba SMB Daemon.
2024-12-24T17:21:35.203396+00:00 live systemd[1]: Reached target multi-user.target - Multi-User System.
2024-12-24T17:21:35.203654+00:00 live systemd[1]: Reached target graphical.target - Graphical Interface.
2024-12-24T17:21:35.216090+00:00 live systemd[1111]: wireplumber.service: Scheduled restart job, restart counter is at 1.
2024-12-24T17:21:35.216212+00:00 live systemd[1111]: Stopped wireplumber.service - Multimedia Service Session Manager.
2024-12-24T17:21:35.236383+00:00 live systemd[1]: Starting systemd-update-utmp-runlevel.service - Record Runlevel Change in UTMP...
2024-12-24T17:21:35.236551+00:00 live systemd[1111]: Started wireplumber.service - Multimedia Service Session Manager.
2024-12-24T17:21:35.239926+00:00 live systemd[1]: systemd-rfkill.service: Deactivated successfully.
2024-12-24T17:21:35.248734+00:00 live systemd[1]: systemd-update-utmp-runlevel.service: Deactivated successfully.
2024-12-24T17:21:35.248844+00:00 live systemd[1]: Finished systemd-update-utmp-runlevel.service - Record Runlevel Change in UTMP.
2024-12-24T17:21:35.248906+00:00 live systemd[1]: Startup finished in 8.036s (kernel) + 8.235s (userspace) = 16.271s.
2024-12-24T17:21:35.251742+00:00 live wireplumber[1174]: Failed to connect to session bus: Unable to autolaunch a dbus-daemon without a $DISPLAY for X11
2024-12-24T17:21:35.252453+00:00 live wireplumber[1174]: RTKit error: org.freedesktop.DBus.Error.ServiceUnknown
2024-12-24T17:21:35.252740+00:00 live wireplumber[1174]: could not set nice-level to -11: No such file or directory
2024-12-24T17:21:35.252835+00:00 live wireplumber[1174]: RTKit error: org.freedesktop.DBus.Error.ServiceUnknown
2024-12-24T17:21:35.254608+00:00 live wireplumber[1174]: RTKit error: org.freedesktop.DBus.Error.ServiceUnknown
2024-12-24T17:21:35.269266+00:00 live wireplumber[1174]: Error acquiring bus address: Cannot autolaunch D-Bus without X11 $DISPLAY
2024-12-24T17:21:35.269764+00:00 live wireplumber[1174]: 0x55ec0970f6f0: leaked proxy 0x55ec097b54f0 id:3
2024-12-24T17:21:35.269871+00:00 live wireplumber[1174]: disconnected from pipewire
2024-12-24T17:21:35.272846+00:00 live systemd[1111]: wireplumber.service: Main process exited, code=exited, status=70/SOFTWARE
2024-12-24T17:21:35.273078+00:00 live systemd[1111]: wireplumber.service: Failed with result 'exit-code'.
2024-12-24T17:21:35.624003+00:00 live systemd[1111]: wireplumber.service: Scheduled restart job, restart counter is at 2.
2024-12-24T17:21:35.624118+00:00 live systemd[1111]: Stopped wireplumber.service - Multimedia Service Session Manager.
2024-12-24T17:21:35.645035+00:00 live systemd[1111]: Started wireplumber.service - Multimedia Service Session Manager.
2024-12-24T17:21:35.657840+00:00 live wireplumber[1179]: Failed to connect to session bus: Unable to autolaunch a dbus-daemon without a $DISPLAY for X11
2024-12-24T17:21:35.658558+00:00 live wireplumber[1179]: RTKit error: org.freedesktop.DBus.Error.ServiceUnknown
2024-12-24T17:21:35.658653+00:00 live wireplumber[1179]: could not set nice-level to -11: No such file or directory
2024-12-24T17:21:35.658785+00:00 live wireplumber[1179]: RTKit error: org.freedesktop.DBus.Error.ServiceUnknown
2024-12-24T17:21:35.660539+00:00 live wireplumber[1179]: RTKit error: org.freedesktop.DBus.Error.ServiceUnknown
2024-12-24T17:21:35.676555+00:00 live wireplumber[1179]: Error acquiring bus address: Cannot autolaunch D-Bus without X11 $DISPLAY
2024-12-24T17:21:35.676871+00:00 live wireplumber[1179]: 0x556f15865dd0: leaked proxy 0x556f1590c900 id:3
2024-12-24T17:21:35.676991+00:00 live wireplumber[1179]: disconnected from pipewire
2024-12-24T17:21:35.679948+00:00 live systemd[1111]: wireplumber.service: Main process exited, code=exited, status=70/SOFTWARE
2024-12-24T17:21:35.680232+00:00 live systemd[1111]: wireplumber.service: Failed with result 'exit-code'.
2024-12-24T17:21:36.030852+00:00 live systemd[1111]: wireplumber.service: Scheduled restart job, restart counter is at 3.
2024-12-24T17:21:36.030988+00:00 live systemd[1111]: Stopped wireplumber.service - Multimedia Service Session Manager.
2024-12-24T17:21:36.049158+00:00 live systemd[1111]: Started wireplumber.service - Multimedia Service Session Manager.
2024-12-24T17:21:36.065823+00:00 live wireplumber[1187]: Failed to connect to session bus: Unable to autolaunch a dbus-daemon without a $DISPLAY for X11
2024-12-24T17:21:36.066573+00:00 live wireplumber[1187]: RTKit error: org.freedesktop.DBus.Error.ServiceUnknown
2024-12-24T17:21:36.066681+00:00 live wireplumber[1187]: could not set nice-level to -11: No such file or directory
2024-12-24T17:21:36.066837+00:00 live wireplumber[1187]: RTKit error: org.freedesktop.DBus.Error.ServiceUnknown
2024-12-24T17:21:36.069081+00:00 live wireplumber[1187]: RTKit error: org.freedesktop.DBus.Error.ServiceUnknown
2024-12-24T17:21:36.081591+00:00 live wireplumber[1187]: Error acquiring bus address: Cannot autolaunch D-Bus without X11 $DISPLAY
2024-12-24T17:21:36.081878+00:00 live wireplumber[1187]: 0x55ae239d59f0: leaked proxy 0x55ae23a3d490 id:3
2024-12-24T17:21:36.081975+00:00 live wireplumber[1187]: disconnected from pipewire
2024-12-24T17:21:36.083770+00:00 live systemd[1111]: wireplumber.service: Main process exited, code=exited, status=70/SOFTWARE
2024-12-24T17:21:36.083971+00:00 live systemd[1111]: wireplumber.service: Failed with result 'exit-code'.
2024-12-24T17:21:36.434580+00:00 live systemd[1111]: wireplumber.service: Scheduled restart job, restart counter is at 4.
2024-12-24T17:21:36.434706+00:00 live systemd[1111]: Stopped wireplumber.service - Multimedia Service Session Manager.
2024-12-24T17:21:36.453086+00:00 live systemd[1111]: Started wireplumber.service - Multimedia Service Session Manager.
2024-12-24T17:21:36.469272+00:00 live wireplumber[1196]: Failed to connect to session bus: Unable to autolaunch a dbus-daemon without a $DISPLAY for X11
2024-12-24T17:21:36.469823+00:00 live wireplumber[1196]: RTKit error: org.freedesktop.DBus.Error.ServiceUnknown
2024-12-24T17:21:36.469926+00:00 live wireplumber[1196]: could not set nice-level to -11: No such file or directory
2024-12-24T17:21:36.470075+00:00 live wireplumber[1196]: RTKit error: org.freedesktop.DBus.Error.ServiceUnknown
2024-12-24T17:21:36.472398+00:00 live wireplumber[1196]: RTKit error: org.freedesktop.DBus.Error.ServiceUnknown
2024-12-24T17:21:36.486031+00:00 live wireplumber[1196]: Error acquiring bus address: Cannot autolaunch D-Bus without X11 $DISPLAY
2024-12-24T17:21:36.486374+00:00 live wireplumber[1196]: 0x55a202c72c00: leaked proxy 0x55a202cebbb0 id:4
2024-12-24T17:21:36.486478+00:00 live wireplumber[1196]: disconnected from pipewire
2024-12-24T17:21:36.487816+00:00 live systemd[1111]: wireplumber.service: Main process exited, code=exited, status=70/SOFTWARE
2024-12-24T17:21:36.488069+00:00 live systemd[1111]: wireplumber.service: Failed with result 'exit-code'.
2024-12-24T17:21:36.839315+00:00 live systemd[1111]: wireplumber.service: Scheduled restart job, restart counter is at 5.
2024-12-24T17:21:36.839502+00:00 live systemd[1111]: Stopped wireplumber.service - Multimedia Service Session Manager.
2024-12-24T17:21:36.839638+00:00 live systemd[1111]: wireplumber.service: Start request repeated too quickly.
2024-12-24T17:21:36.839765+00:00 live systemd[1111]: wireplumber.service: Failed with result 'exit-code'.
2024-12-24T17:21:36.839888+00:00 live systemd[1111]: Failed to start wireplumber.service - Multimedia Service Session Manager. 

Running journalctl gives more or less the same thing (see attached).

This is the contents of /etc/systemd/user/pipewire.service.wants/wireplumber.service.

Code: Select all

[Unit]
Description=Multimedia Service Session Manager
After=pipewire.service
BindsTo=pipewire.service
Conflicts=pipewire-media-session.service

[Service]
LockPersonality=yes
MemoryDenyWriteExecute=yes
NoNewPrivileges=yes
RestrictNamespaces=yes
SystemCallArchitectures=native
SystemCallFilter=@system-service
Type=simple
ExecStart=/usr/bin/wireplumber
Restart=on-failure
Slice=session.slice
Environment=GIO_USE_VFS=local

[Install]
WantedBy=pipewire.service

I don't think it matters, but I got this in the terminal when I ran wireplumber:

Code: Select all

 root@live:~# wireplumber
M 11:24:09.604648          wp-device ../lib/wp/device.c:619:wp_spa_device_new_from_spa_factory: SPA handle 'api.libcamera.enum.manager' could not be loaded; is it installed?
M 11:24:09.604709   script/libcamera libcamera.lua:168:chunk: PipeWire's libcamera SPA missing or broken. libcamera not supported.
M 11:24:09.947960         spa.bluez5 ../spa/plugins/bluez5/bluez5-dbus.c:3943:object_manager_handler: Trying to use legacy bluez5 API for LE Audio - only A2DP will be supported. Please upgrade bluez5.
W 11:24:09.983889 m-portal-permissio ../modules/module-portal-permissionstore.c:63:wp_portal_permissionstore_plugin_lookup: <WpPortalPermissionStorePlugin:0x561584ac2310> Failed to call Lookup: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.impl.portal.PermissionStore was not provided by any .service files

[fredx181]

Hi Dan, perhaps try copying the wireplumber service files from /usr/lib/systemd/user/ to /root/.config/systemd/user/ (reboot may be required).

[dancytron]

That didn't work.

Maybe wireplumber just needs to load later??

edit: installed dbus-user-session. That fixed it. It created a dbus session running as root and wireplumber then started up like it should. Bluetooth works!!!!!!!!!!!!

[dancytron]

Is there a reason that openbox and adwaita-icon-theme are pinned other than size?

Dan

[fredx181]

Is there a reason that openbox and adwaita-icon-theme are pinned other than size?

Dan

The openbox package because it's special compile from custom repo that supports rounded corners for windows, which I liked at that time, that's all.
The official adwaita-icon-theme is rather big and is dependency of some main packages, so small version pinned (perhaps better to un-pin that as size isn't that important anymore compared to the old days) .

[gumanzoy]

The official adwaita-icon-theme is rather big and is dependency of some main packages, so small version pinned (perhaps better to un-pin that as size isn't that important anymore compared to the old days) .

Now in sid and trixie split in 2 packages:
adwaita-icon-theme (47.0-2) - 452,3Kb
adwaita-icon-theme-legacy (46.2-2) - 2 053,6Kb

legacy package includes only /*x*/legacy/*.png folders. And nothing in other categories.

[gumanzoy]

@fredx181

Hi

Why need old versions xdg-utils_1.1.1-1+deb9u1_all.deb and libpango1.0-0_1.42.4-8_amd64.deb ?

https://github.com/doglinux/bookworm/tree/master/amd64

[fredx181]

@fredx181

Hi

Why need old versions xdg-utils_1.1.1-1+deb9u1_all.deb and libpango1.0-0_1.42.4-8_amd64.deb ?

https://github.com/doglinux/bookworm/tree/master/amd64

Yes, probably no use for these, frankly I can't remember why I added these years ago, my guess is that it was at the time that Bookworm was still the "testing" branch and had to fix some problem.
Anyway, I did test installing the Debian versions apt install xdg-utils=1.1.3-4.1 and apt install libpango1.0-0=1.50.12+ds-1 and went without problems.
After some more testing later I will remove these packages from my repo.
EDIT: 20 Jan. 2025. Removed now.

[Amol]

Hello DDG users !
I have for the first time in my life used the make-live BW to create an iso.It is a big changement with the habit of dowloading iso made by devs.Now, i want to use this iso to have a functional system, but i encounter a problem to change the cheat code for my save folder to be reached at boot up.My question is , where to change it.I 've looked at /live/image/boot/grub.cfg but this file is in read mode only.Some help should be greatly appreciated .In the gumanzoy xfce bookworm iso used with ventoy this is done automatically, so no problem with it.
Amol

[fredx181]

Hello DDG users !
I have for the first time in my life used the make-live BW to create an iso.It is a big changement with the habit of dowloading iso made by devs.Now, i want to use this iso to have a functional system, but i encounter a problem to change the cheat code for my save folder to be reached at boot up.My question is , where to change it.I 've looked at /live/image/boot/grub.cfg but this file is in read mode only.Some help should be greatly appreciated .In the gumanzoy xfce bookworm iso used with ventoy this is done automatically, so no problem with it.
Amol

Hi Amol, yes, that can be a disadvantage of direct ISO booting that the grub.cfg inside is read-only.
Here's a workaround:
- Create a folder "deb_dog" on the root of some Linux partition (e.g. ext3 or ext4 formatted) NOT on FAT32 or NTFS.
- Boot with entry: "DebianDog changes=/deb_dog , save to folder"
And it should be found and /deb_dog/changes will be created.

But you can always modify manually the boot command line at boot time by pressing 'e' at the point when the GRUB screen appears, although not very convenient to do that every time you boot.
EDIT: What I always do is to extract the ISO and make a regular frugal install (and GRUB bootloader) on HDD or USB, then I can edit grub.cfg exactly how I want it.