BookwormPup64 10.0.8

Moderator: Forum moderators

radky
Posts: 355
Joined: Fri May 28, 2021 2:14 am
Has thanked: 41 times
Been thanked: 320 times

Re: BookwormPup64 10.0.8

Post by radky »

@Clarity

When JWMdesk is launched, the script checks the jwmrc-personal configuration file for either modern or legacy jwm code syntax pertaining to the display of virtual desktops. If the code is missing or corrupt, this option will not appear in the JWMdesk gui.

Clarity
Posts: 3784
Joined: Fri Jul 24, 2020 10:59 pm
Has thanked: 1602 times
Been thanked: 517 times

Re: BookwormPup64 10.0.8

Post by Clarity »

@norgo , @peebee , @rockedge , @radky

Almost ALL desktop PCs (and many laptops too) have processors that are VM capable. Each of you know the value of VM being turned on when KVM processing benefits the VM performacne. This is presented to you, as each of you KNOW the value of the following.

@Norgo has built a utility some time ago that not only exposes, but also turns on the VM support that the PC has. It is named "qemu_ready". It is intelligent while also tiny.

This utility is NOT one that comes with QEMU packaging, officially; even as its usefulness for VM is apparent.

Since its tiny, I propose that it be included in the system builds such that when QEMU is installed, the utility is present. Further if included, there 'could' be utility allowing users to activate it via the system Menu.

If this is reasonable, it will show up in future versions thru your WoofCE efforts.

ozsouth
Posts: 1556
Joined: Sun Jul 12, 2020 2:38 am
Location: S.E. Australia
Has thanked: 239 times
Been thanked: 713 times

Re: BookwormPup64 10.0.8 initmodules

Post by ozsouth »

radky wrote: Wed Sep 18, 2024 3:20 pm
ozsouth wrote: Wed Sep 18, 2024 5:06 am

@radky - modules init file is: dpupbw64initmodules.txt (in same folder as puppy .sfs). By making that file with just (the word) coretemp in it & rebooting, temperature taskbar display now works for me (with my 6.6.47 kernel installed). If there were other modules, would be comma separated.

@ozsouth

If I understand correctly (for frugal installs) Puppy creates *initmodules.txt during the creation of the save area. ... The *initmodules.txt file contains a comma-delimited list of kernel modules which support input devices (wireless keyboards) that must load early in the boot process. I'm not sure about the suitability of *initmodules.txt for early loading of other kernel modules (such as coretemp.ko) which typically load via modprobe.

@radky - absolutely correct if you intend to install. That was a shorthand hack I used to illustrate a possibility for just running live. A ydrv including a small script with modprobe coretemp, in /root/Startup would be the correct procedure. I should have specified that.

gyrog
Posts: 644
Joined: Thu Oct 01, 2020 8:17 am
Location: Australia
Has thanked: 16 times
Been thanked: 230 times
Contact:

Re: BookwormPup64 10.0.8

Post by gyrog »

About "...initmodules.txt":

It is automatically created if the first boot resulted in any loaded modules that are likely to be needed by the keyboard.
It's created as a file in /tmp at about the same time as QuichSetup is run.
It is then copied to the the save location by rc.shutdown towards the end of first shutdown processing.
Note: The save location is not always the same as the install location, so the "...initmodules.txt" file might not be in the same directory as the puppy...sfs file.

It can be generated manually via Menu->System->Boot manager->Modules->Load the specified module(s) early in the boot process.

While this "workaround" is designed to enable a working keyboard during subsequent boots,
the 'init' script will load any module, provided it exists.

radky
Posts: 355
Joined: Fri May 28, 2021 2:14 am
Has thanked: 41 times
Been thanked: 320 times

Re: BookwormPup64 10.0.8

Post by radky »

Forum members rockedge and smokey01 have been very gracious in providing access to their servers for quick access to the BW64 iso and associated files. Thank you rockedge and smokey01 for this service to the Puppy community !

However high bandwidth usage of these servers for iso downloads may exceed restrictions defined by the terms and conditions of the upstream hosting service. Rockedge's upstream hosting service has recently imposed severe restrictions on his use of the server, though (for now) BW64 downloads are still available.

At smokey01's server, transfers are now intermittently throttled (0.62 KB/s). Consequently, this supplemental server is no longer suitable for high bandwidth downloads of the BW64 iso, and this option is now removed from the first page of the BW64 forum thread. Continued high bandwidth usage of this server may result in the loss of my access privileges.

Soon, the BW64 files will be transferred to a larger (high-capacity) hosting service, and this should provide necessary relief for rockedge and smokey01.

Clarity
Posts: 3784
Joined: Fri Jul 24, 2020 10:59 pm
Has thanked: 1602 times
Been thanked: 517 times

Re: BookwormPup64 10.0.8

Post by Clarity »

BKWP64 v1008 boot results are published in the WoofCE Results table here

FYI

User avatar
bigpup
Moderator
Posts: 6937
Joined: Tue Jul 14, 2020 11:19 pm
Location: Earth, South Eastern U.S.
Has thanked: 898 times
Been thanked: 1511 times

Re: BookwormPup64 10.0.8

Post by bigpup »

Soon, the BW64 files will be transferred to a larger (high-capacity) hosting service, and this should provide necessary relief for rockedge and smokey01.

I hope it is this one:
http://distro.ibiblio.org/puppylinux/

If not you really need to start using it.

There is no cost to using it. It is free.

It will always be free to use and is not going to disappear.

All you need to do is make a request to be able to post to it and become a registered poster.

I really do not understand why people are not using it, to provide the download storage of what they produce in Puppy Linux?????

The things you do not tell us, are usually the clue to fixing the problem.
When I was a kid, I wanted to be older.
This is not what I expected :o

User avatar
BarryK
Posts: 2649
Joined: Tue Dec 24, 2019 1:04 pm
Has thanked: 126 times
Been thanked: 731 times

Re: BookwormPup64 10.0.8

Post by BarryK »

bigpup wrote: Wed Sep 25, 2024 2:24 pm

Soon, the BW64 files will be transferred to a larger (high-capacity) hosting service, and this should provide necessary relief for rockedge and smokey01.

I hope it is this one:
http://distro.ibiblio.org/puppylinux/

If not you really need to start using it.

There is no cost to using it. It is free.

It will always be free to use and is not going to disappear.

All you need to do is make a request to be able to post to it and become a registered poster.

I really do not understand why people are not using it, to provide the download storage of what they produce in Puppy Linux?????

Anyone can ftp to it, you just need the login and password. It is ftp port 22 as I recall, and url login.ibiblio.org
The username will be "puppylinux"
Various people have the password; peebee and rockedge do I think, send them a pm.

You can use rsync to login and upload. If interested, @radky , I can give you my upload script for easyos and quirky, easily modified for puppylinux

radky
Posts: 355
Joined: Fri May 28, 2021 2:14 am
Has thanked: 41 times
Been thanked: 320 times

Re: BookwormPup64 10.0.8

Post by radky »

BarryK wrote: Wed Sep 25, 2024 2:49 pm
bigpup wrote: Wed Sep 25, 2024 2:24 pm

Soon, the BW64 files will be transferred to a larger (high-capacity) hosting service, and this should provide necessary relief for rockedge and smokey01.

I hope it is this one:
http://distro.ibiblio.org/puppylinux/

If not you really need to start using it.

There is no cost to using it. It is free.

It will always be free to use and is not going to disappear.

All you need to do is make a request to be able to post to it and become a registered poster.

I really do not understand why people are not using it, to provide the download storage of what they produce in Puppy Linux?????

Anyone can ftp to it, you just need the login and password. It is ftp port 22 as I recall, and url login.ibiblio.org
The username will be "puppylinux"
Various people have the password; peebee and rockedge do I think, send them a pm.

You can use rsync to login and upload. If interested, @radky , I can give you my upload script for easyos and quirky, easily modified for puppylinux

@BarryK

Your ibiblio upload script would be very helpful. When convenient for you, just send by PM

Thank you !

User avatar
BarryK
Posts: 2649
Joined: Tue Dec 24, 2019 1:04 pm
Has thanked: 126 times
Been thanked: 731 times

Re: BookwormPup64 10.0.8

Post by BarryK »

radky wrote: Wed Sep 25, 2024 4:35 pm
BarryK wrote: Wed Sep 25, 2024 2:49 pm
bigpup wrote: Wed Sep 25, 2024 2:24 pm

I hope it is this one:
http://distro.ibiblio.org/puppylinux/

If not you really need to start using it.

There is no cost to using it. It is free.

It will always be free to use and is not going to disappear.

All you need to do is make a request to be able to post to it and become a registered poster.

I really do not understand why people are not using it, to provide the download storage of what they produce in Puppy Linux?????

Anyone can ftp to it, you just need the login and password. It is ftp port 22 as I recall, and url login.ibiblio.org
The username will be "puppylinux"
Various people have the password; peebee and rockedge do I think, send them a pm.

You can use rsync to login and upload. If interested, @radky , I can give you my upload script for easyos and quirky, easily modified for puppylinux

@BarryK

Your ibiblio upload script would be very helpful. When convenient for you, just send by PM

Thank you !

Done, pm sent!

radky
Posts: 355
Joined: Fri May 28, 2021 2:14 am
Has thanked: 41 times
Been thanked: 320 times

Re: BookwormPup64 10.0.8

Post by radky »

BarryK wrote: Thu Sep 26, 2024 6:32 am

Done, pm sent!

Received pm, thank you !

radky
Posts: 355
Joined: Fri May 28, 2021 2:14 am
Has thanked: 41 times
Been thanked: 320 times

Re: BookwormPup64 10.0.8

Post by radky »

BW64 files are now available for download via ibiblio.org !

Go to first post for download link.

Thanks @BarryK @peebee @rockedge

mikolaj_q
Posts: 18
Joined: Wed Apr 06, 2022 6:46 am

Re: BookwormPup64 10.0.8

Post by mikolaj_q »

What is the official way to update my installation for example 10.0.7 ---> 10.0.8?

User avatar
bigpup
Moderator
Posts: 6937
Joined: Tue Jul 14, 2020 11:19 pm
Location: Earth, South Eastern U.S.
Has thanked: 898 times
Been thanked: 1511 times

Re: BookwormPup64 10.0.8

Post by bigpup »

There are several ways to do this.

Assuming we are talking about a frugal install on some type of drive.

Download the BookwormPup64 10.0.8 ISO.

Do a completely new frugal install using this 10.0.8 ISO.

Note:
The main Frugalpup Installer, that is in BookwormPup64 10.0.7, can do the install, and update the boot loader, for booting the new 10.0.8 install.

Copy the old BookwormPup64 save you used in 10.0.7 into the 10.0.8 frugal install.

Now boot 10.0.8 and it should have all the settings and stuff you had added to 10.0.7.

Only stuff that would not still work is anything that is kernel specific software. It will have to be reinstalled for the different kernel that is in 10.0.8

This is safest way, because you still have the 10.0.7 working install, if something goes wrong. Later it can be deleted if you no longer want it.

A manual way.

This is best done by booting something other than the 10.0.7 install you are trying to update.
So it is not being used as you do this file replacement.

Open the 10.0.8 ISO in Rox file manager showing the contents.

Replace all the files in the 10.0.7 frugal install with the files that are in the 10.0.8 ISO.
.
.

The things you do not tell us, are usually the clue to fixing the problem.
When I was a kid, I wanted to be older.
This is not what I expected :o

User avatar
nilsonmorales
Posts: 177
Joined: Thu Dec 26, 2019 1:47 am
Location: El Salvador
Has thanked: 67 times
Been thanked: 105 times
Contact:

Re: BookwormPup64 10.0.8

Post by nilsonmorales »

Driver request please
Network controller [0280]: Broadcom Inc. and subsidiaries BCM43228 802.11a/b/g/n [14e4:4359]
and
Bus 002 Device 005: ID 0bda:b812 Realtek Semiconductor Corp. RTL88x2bu [AC1200 Techkey]
for bookwormpup64 10.0.8

JusGellin
Posts: 584
Joined: Fri Jan 19, 2024 11:12 pm
Has thanked: 72 times
Been thanked: 71 times

Re: BookwormPup64 10.0.8

Post by JusGellin »

How can I install the correct display driver to get 1920x1200 resolution?
The graphics is Intel Raptor Lake-U [Intel Graphics] [8086:a7ac]
When I boot to this computer, the only resolution it lists is 800x600 75Hz - nothing else

Thanks

User avatar
mikewalsh
Moderator
Posts: 6122
Joined: Tue Dec 03, 2019 1:40 pm
Location: King's Lynn, UK
Has thanked: 781 times
Been thanked: 1955 times

Re: BookwormPup64 10.0.8

Post by mikewalsh »

@bigpup :-

Would you not achieve the same effect by simply swapping the adrv, bdrv, fdrv, base Puppy SFS and the initrd.gz? No need to touch the zdrv, vmlinuz or kbuild SFS; if the kernel's functioning OK with your hardware, why bother upgrading just for the sake of a few 'point release' numbers? This IS an LTS kernel, after all....

Mike. :?

User avatar
Jasper
Posts: 2019
Joined: Wed Sep 07, 2022 1:20 pm
Has thanked: 851 times
Been thanked: 468 times

Re: BookwormPup64 10.0.8

Post by Jasper »

JusGellin wrote: Sat Nov 02, 2024 3:04 am

How can I install the correct display driver to get 1920x1200 resolution?
The graphics is Intel Raptor Lake-U [Intel Graphics] [8086:a7ac]
When I boot to this computer, the only resolution it lists is 800x600 75Hz - nothing else

Thanks

Do you mean you have a Intel Raptor Lake-U cpu?

To identify your on-board Intel gfx enter this in terminal

lspci -k |grep -EA3 'VGA|3D|Display'

This should state if it is UHD or Iris Xe

Or you can use a portable app provided by mikewalsh here:

viewtopic.php?t=10783

To find out the supported resolutions of your monitor enter in terminal

xrandr -q

If your chosen resolution is available, then again in terminal

xrandr -s 1920x1200

JusGellin
Posts: 584
Joined: Fri Jan 19, 2024 11:12 pm
Has thanked: 72 times
Been thanked: 71 times

Re: BookwormPup64 10.0.8

Post by JusGellin »

@Jasper
I'm using Ventoy to run these for now

Here's ruinning the commands on BookwormPup64 10.0.8

Code: Select all

# lspci -k | grep -EA3 'VGA|3D|DISPLAY'
0000:00:02.0 VGA compatible controller: Intel Corporation Raptor Lake-U [Intel Graphics] (rev 04)
	Subsystem: Dell Raptor Lake-U [Intel Graphics]
0000:00:04.0 Signal processing controller: Intel Corporation Raptor Lake Dynamic Platform and Thermal Framework Processor Participant (rev 01)
	Subsystem: Dell Raptor Lake Dynamic Platform and Thermal Framework Processor Participant
# 

Code: Select all

# xrandr -q
xrandr: Failed to get size of gamma for output default
Screen 0: minimum 800 x 600, current 800 x 600, maximum 800 x 600
default connected 800x600+0+0 0mm x 0mm
   800x600       75.00* 
# 

Code: Select all

# xrandr -s 1920x1200
Size 1920x1200 not found in available modes
#

=============================================================
I also tried this on a KLV named KLV-vmHost-rc4 that works:

Code: Select all

# lspci -k |grep -EA3 'VGA|3D|Display'

This gave nothing so I ran this:

Code: Select all

bash-5.2
bash-5.2# lspci
00:08.0 Class 0880: 8086:a74f
00:15.1 Class 0c80: 8086:51e9
00:1f.0 Class 0601: 8086:519d
e0:06.0 Class 0604: 8086:a74d
00:04.0 Class 1180: 8086:a71d
00:14.3 Class 0280: 8086:51f1
00:16.0 Class 0780: 8086:51e0
00:1f.5 Class 0c80: 8086:51a4
00:1f.3 Class 0403: 8086:51ca
00:00.0 Class 0600: 8086:a708
00:12.0 Class 0700: 8086:51fc
00:15.0 Class 0c80: 8086:51e8
00:06.0 Class 0880: 8086:09ab
00:0e.0 Class 0104: 8086:a77f
00:14.2 Class 0500: 8086:51ef
00:02.0 Class 0300: 8086:a7ac
e1:00.0 Class 0108: 144d:a80f
00:14.0 Class 0c03: 8086:51ed
00:1f.4 Class 0c05: 8086:51a3
bash-5.2# 

Code: Select all

bash-5.2# xrandr -q
Screen 0: minimum 320 x 200, current 1920 x 1200, maximum 16384 x 16384
eDP-1 connected primary 1920x1200+0+0 (normal left inverted right x axis y axis) 302mm x 189mm
   1920x1200     60.00*+  59.88    59.95    48.00  
   1920x1080     60.01    59.97    59.96    59.93  
   1600x1200     60.00  
   1680x1050     59.95    59.88  
   1400x1050     59.98  
   1600x900      59.99    59.94    59.95    59.82  
   1280x1024     60.02  
   1400x900      59.96    59.88  
   1280x960      60.00  
   1440x810      60.00    59.97  
   1368x768      59.88    59.85  
   1280x800      59.99    59.97    59.81    59.91  
   1280x720      60.00    59.99    59.86    59.74  
   1024x768      60.04    60.00  
   960x720       60.00  
   928x696       60.05  
   896x672       60.01  
   1024x576      59.95    59.96    59.90    59.82  
   960x600       59.93    60.00  
   960x540       59.96    59.99    59.63    59.82  
   800x600       60.00    60.32    56.25  
   840x525       60.01    59.88  
   864x486       59.92    59.57  
   700x525       59.98  
   800x450       59.95    59.82  
   640x512       60.02  
   700x450       59.96    59.88  
   640x480       60.00    59.94  
   720x405       59.51    58.99  
   684x384       59.88    59.85  
   640x400       59.88    59.98  
   640x360       59.86    59.83    59.84    59.32  
   512x384       60.00  
   512x288       60.00    59.92  
   480x270       59.63    59.82  
   400x300       60.32    56.34  
   432x243       59.92    59.57  
   320x240       60.05  
   360x202       59.51    59.13  
   320x180       59.84    59.32  
HDMI-1 disconnected (normal left inverted right x axis y axis)
DP-1 disconnected (normal left inverted right x axis y axis)
DP-2 disconnected (normal left inverted right x axis y axis)
bash-5.2# 

Code: Select all

bash-5.2# xrandr -s 1920x1200
bash-5.2# 

This is on a new laptop I just got.
Inspiron | 14 7440 2-in-1

I tried a couple other isos that wouldn't come up.

Thanks

User avatar
Jasper
Posts: 2019
Joined: Wed Sep 07, 2022 1:20 pm
Has thanked: 851 times
Been thanked: 468 times

Re: BookwormPup64 10.0.8

Post by Jasper »

I do not use Ventoy myself.

I found this online

Adjust the resolution

In Ventoy' main menu, use F5 Tools --> Resolution Configuration to adjust the Resolution, and then boot the ISO file.

In most cases, choosing a smaller resolution will be better, for example 800x600x16 800x600x32 1024x768x32

Worth a try?

JusGellin
Posts: 584
Joined: Fri Jan 19, 2024 11:12 pm
Has thanked: 72 times
Been thanked: 71 times

Re: BookwormPup64 10.0.8

Post by JusGellin »

@Jasper
Even changing the resolution in Ventoy didn't change what came up.

I have a frugal install of Bookworm on a usb stick.
Trying this brings up the full resolution of 1920x1200.
But the Display Settings app doesn't allow changing to anything else.
I tried the commands you gave, but it tells me any other size is unavailable.

So Bookworm is capable of the highest resolution, but so far can't change to another resolution.
I wonder why.

Thanks

User avatar
bigpup
Moderator
Posts: 6937
Joined: Tue Jul 14, 2020 11:19 pm
Location: Earth, South Eastern U.S.
Has thanked: 898 times
Been thanked: 1511 times

Re: BookwormPup64 10.0.8

Post by bigpup »

Post the info provided by Pup-Sysinfo ->Devices ->Display ->Video-info

The things you do not tell us, are usually the clue to fixing the problem.
When I was a kid, I wanted to be older.
This is not what I expected :o

JusGellin
Posts: 584
Joined: Fri Jan 19, 2024 11:12 pm
Has thanked: 72 times
Been thanked: 71 times

Re: BookwormPup64 10.0.8

Post by JusGellin »

@bigpup
Thanks

VIDEO REPORT: BookwormPup64, version 10.0.7
Processor: Intel(R) Core(TM) 7 150U

X.Org X Server 1.21.1.7
X Protocol Version 11, Revision 0

Chip description:

0000:00:02.0 VGA compatible controller [0300]: Intel Corporation Raptor Lake-U [Intel Graphics] [8086:a7ac] (rev 04)
Subsystem: Dell Raptor Lake-U [Intel Graphics] [1028:0ca7]

10000:e0:06.0 PCI bridge [0604]: Intel Corporation Raptor Lake PCIe 4.0 Graphics Port [8086:a74d] (rev 01)
Subsystem: Dell Raptor Lake PCIe 4.0 Graphics Port [1028:0ca7]
Kernel driver in use: pcieport

Requested by /etc/X11/xorg.conf:
Modules requested to be loaded: dbe

Probing Xorg startup log file (/var/log/Xorg.0.log):
Driver loaded (and currently in use): vesa
Loaded modules: dbe evdev fb fbdevhw glx libinput shadow synaptics

Actual rendering on monitor:
Resolution: 1920x1200 pixels (508x318 millimeters)
Depth: 24 planes

direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.4
OpenGL vendor string: Mesa/X.org
OpenGL renderer string: llvmpipe (LLVM 15.0.6, 256 bits)
OpenGL core profile version string: 4.5 (Core Profile) Mesa 22.3.6

...the above also recorded in /tmp/report-video

User avatar
Jasper
Posts: 2019
Joined: Wed Sep 07, 2022 1:20 pm
Has thanked: 851 times
Been thanked: 468 times

Re: BookwormPup64 10.0.8

Post by Jasper »

@JusGellin

@Jasper
I'm using Ventoy to run these for now

I am confused now.

Are you using Ventoy to boot up your BookWorm OS?

Is this an ISO booting up? (...............ISO/WIM/IMG/VHD(x)/EFI)

Ventoy uses it's own settings and these are restricted to a few resolutions. AFAIK you can change the theme resolution to whatever you want.

To edit this you would need to change the JSON file via the Plugin Editor

https://www.ventoy.net/en/plugin_entry.html

Look at the Ventoy Github 'Issues'

https://github.com/ventoy/Ventoy/issues/3019

JusGellin
Posts: 584
Joined: Fri Jan 19, 2024 11:12 pm
Has thanked: 72 times
Been thanked: 71 times

Re: BookwormPup64 10.0.8

Post by JusGellin »

@Jasper
As I mentioned above, I tried changing the resolution in Ventoy.
It acted like it would, but once Bookworm came up it went back to the low resolution of 800x600 75Hz.

So I tried my frugal installed (instead of the Ventoy iso) usb stick which came up with the max resolution of 1920x1200 but not capable of change.
So the information I listed that @bigpup asked for is from that boot up.

I hope that is clear.

Thanks

User avatar
Jasper
Posts: 2019
Joined: Wed Sep 07, 2022 1:20 pm
Has thanked: 851 times
Been thanked: 468 times

Re: BookwormPup64 10.0.8

Post by Jasper »

@JusGellin

Let's wait for Bigpup's reply/solution.

JusGellin
Posts: 584
Joined: Fri Jan 19, 2024 11:12 pm
Has thanked: 72 times
Been thanked: 71 times

Re: BookwormPup64 10.0.8

Post by JusGellin »

What can I do to get the display resolution selections for this pc?

JusGellin wrote: Sat Nov 02, 2024 12:56 pm

@bigpup
Thanks

VIDEO REPORT: BookwormPup64, version 10.0.7
Processor: Intel(R) Core(TM) 7 150U

X.Org X Server 1.21.1.7
X Protocol Version 11, Revision 0

Chip description:

0000:00:02.0 VGA compatible controller [0300]: Intel Corporation Raptor Lake-U [Intel Graphics] [8086:a7ac] (rev 04)
Subsystem: Dell Raptor Lake-U [Intel Graphics] [1028:0ca7]

10000:e0:06.0 PCI bridge [0604]: Intel Corporation Raptor Lake PCIe 4.0 Graphics Port [8086:a74d] (rev 01)
Subsystem: Dell Raptor Lake PCIe 4.0 Graphics Port [1028:0ca7]
Kernel driver in use: pcieport

Requested by /etc/X11/xorg.conf:
Modules requested to be loaded: dbe

Probing Xorg startup log file (/var/log/Xorg.0.log):
Driver loaded (and currently in use): vesa
Loaded modules: dbe evdev fb fbdevhw glx libinput shadow synaptics

Actual rendering on monitor:
Resolution: 1920x1200 pixels (508x318 millimeters)
Depth: 24 planes

direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.4
OpenGL vendor string: Mesa/X.org
OpenGL renderer string: llvmpipe (LLVM 15.0.6, 256 bits)
OpenGL core profile version string: 4.5 (Core Profile) Mesa 22.3.6

...the above also recorded in /tmp/report-video

Thanks

Clarity
Posts: 3784
Joined: Fri Jul 24, 2020 10:59 pm
Has thanked: 1602 times
Been thanked: 517 times

Re: BookwormPup64 10.0.8

Post by Clarity »

Hello @JusGellin
Some info found Menu>System>Pup-SysInfo and in SysInfo, choose the report from the Devices>Display section

Hope this helps

User avatar
rcrsn51
Posts: 1382
Joined: Sun Aug 23, 2020 4:26 pm
Been thanked: 357 times

Re: BookwormPup64 10.0.8

Post by rcrsn51 »

JusGellin wrote: Sat Nov 02, 2024 12:56 pm

Driver loaded (and currently in use): vesa

Xorg was unable to find a proper driver for your new hardware and reverted to vesa graphics mode. You need a newer Puppy.

User avatar
bigpup
Moderator
Posts: 6937
Joined: Tue Jul 14, 2020 11:19 pm
Location: Earth, South Eastern U.S.
Has thanked: 898 times
Been thanked: 1511 times

Re: BookwormPup64 10.0.8

Post by bigpup »

@JusGellin

Using the vesa driver is the problem.

This new Intel graphics hardware seems to not have a intel driver for it in BookwormPup64 10.0.8.

Have not found any good info on getting the correct driver installed and working.

May have to wait for a newer kernel and firmware getting into a newer version of BookwormPup64 or some other Puppy Linux version.

People in other Linux OS's are having the same issue.

The things you do not tell us, are usually the clue to fixing the problem.
When I was a kid, I wanted to be older.
This is not what I expected :o

Post Reply

Return to “BookwormPup”