Vanilla Dpup 11.0.x Development Builds

[alibadrelsayed]

and

[alibadrelsayed]

this is the complete dmesg output:

Code: Select all

[    0.018617] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.018618] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.018624] TSC deadline timer available
[    0.018630] CPU topo: Max. logical packages:   1
[    0.018632] CPU topo: Max. logical dies:       1
[    0.018633] CPU topo: Max. dies per package:   1
[    0.018639] CPU topo: Max. threads per core:   2
[    0.018640] CPU topo: Num. cores per package:     4
[    0.018641] CPU topo: Num. threads per package:   8
[    0.018642] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs
[    0.018659] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.018661] PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.018663] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.018664] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.018665] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.018666] PM: hibernation: Registered nosave memory: [mem 0x9cb7f000-0x9de7efff]
[    0.018668] PM: hibernation: Registered nosave memory: [mem 0x9de7f000-0x9df7efff]
[    0.018669] PM: hibernation: Registered nosave memory: [mem 0x9df7f000-0x9dffefff]
[    0.018670] PM: hibernation: Registered nosave memory: [mem 0x9e000000-0xbf1fffff]
[    0.018671] PM: hibernation: Registered nosave memory: [mem 0xbf200000-0xdfffffff]
[    0.018672] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.018673] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[    0.018674] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.018675] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[    0.018676] PM: hibernation: Registered nosave memory: [mem 0xfed10000-0xfed13fff]
[    0.018677] PM: hibernation: Registered nosave memory: [mem 0xfed14000-0xfed17fff]
[    0.018678] PM: hibernation: Registered nosave memory: [mem 0xfed18000-0xfed19fff]
[    0.018679] PM: hibernation: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[    0.018680] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.018681] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.018682] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.018684] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xff7fffff]
[    0.018685] PM: hibernation: Registered nosave memory: [mem 0xff800000-0xffffffff]
[    0.018687] [mem 0xbf200000-0xdfffffff] available for PCI devices
[    0.018689] Booting paravirtualized kernel on bare hardware
[    0.018691] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.026751] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[    0.027663] percpu: Embedded 65 pages/cpu s229376 r8192 d28672 u524288
[    0.027670] pcpu-alloc: s229376 r8192 d28672 u524288 alloc=1*2097152
[    0.027673] pcpu-alloc: [0] 0 1 2 3 [0] 4 5 6 7 
[    0.027697] Kernel command line: BOOT_IMAGE=vmlinuz pfix=fsckp,fsck pmedia=usbflash pupsfs=d75fbfeb-39be-48c9-922b-c6e2effd9940 psave=d75fbfeb-39be-48c9-922b-c6e2effd9940 initrd=ucode.cpio,initrd.zst
[    0.027817] Unknown kernel command line parameters "BOOT_IMAGE=vmlinuz pfix=fsckp,fsck pmedia=usbflash pupsfs=d75fbfeb-39be-48c9-922b-c6e2effd9940 psave=d75fbfeb-39be-48c9-922b-c6e2effd9940", will be passed to user space.
[    0.027836] random: crng init done
[    0.029206] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.029943] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.030102] Fallback order for Node 0: 0 
[    0.030107] Built 1 zonelists, mobility grouping on.  Total pages: 1921370
[    0.030109] Policy zone: Normal
[    0.030117] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[    0.030122] software IO TLB: area num 8.
[    0.065483] Memory: 2615932K/7808112K available (20480K kernel code, 3215K rwdata, 14524K rodata, 4700K init, 4444K bss, 275844K reserved, 0K cma-reserved)
[    0.065773] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.065806] Kernel/User page tables isolation: enabled
[    0.065849] ftrace: allocating 57858 entries in 227 pages
[    0.077047] ftrace: allocated 227 pages with 5 groups
[    0.078283] Dynamic Preempt: voluntary
[    0.078346] rcu: Preemptible hierarchical RCU implementation.
[    0.078347] rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[    0.078349] 	Trampoline variant of Tasks RCU enabled.
[    0.078350] 	Rude variant of Tasks RCU enabled.
[    0.078350] 	Tracing variant of Tasks RCU enabled.
[    0.078351] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.078352] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.078360] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1.
[    0.078362] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1.
[    0.078364] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1.
[    0.082502] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16
[    0.082711] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.084393] Console: colour VGA+ 80x25
[    0.084396] printk: legacy console [tty0] enabled
[    0.084441] ACPI: Core revision 20230628
[    0.084605] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.084620] APIC: Switch to symmetric I/O mode setup
[    0.085025] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.104622] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x22832c2747c, max_idle_ns: 440795236511 ns
[    0.104627] Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.59 BogoMIPS (lpj=9577188)
[    0.104655] CPU0: Thermal monitoring enabled (TM1)
[    0.104689] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[    0.104691] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[    0.104694] process: using mwait in idle threads
[    0.104697] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.104699] Spectre V2 : Mitigation: Retpolines
[    0.104700] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.104701] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.104702] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.104704] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.104706] Spectre V2 : User space: Mitigation: STIBP via prctl
[    0.104708] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[    0.104710] MDS: Mitigation: Clear CPU buffers
[    0.104711] MMIO Stale Data: Unknown: No mitigations
[    0.104712] SRBDS: Mitigation: Microcode
[    0.104717] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.104719] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.104720] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.104722] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.104724] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.129662] Freeing SMP alternatives memory: 52K
[    0.129666] pid_max: default: 32768 minimum: 301
[    0.129713] LSM: initializing lsm=lockdown,capability,landlock,yama,apparmor,tomoyo,bpf,ima,evm
[    0.129729] landlock: Up and running.
[    0.129730] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.129755] AppArmor: AppArmor initialized
[    0.129757] TOMOYO Linux initialized
[    0.129763] LSM support for eBPF active
[    0.129798] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.129809] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.132685] smpboot: CPU0: Intel(R) Core(TM) i7-4700MQ CPU @ 2.40GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[    0.132876] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.132918] ... version:                3
[    0.132919] ... bit width:              48
[    0.132920] ... generic registers:      4
[    0.132921] ... value mask:             0000ffffffffffff
[    0.132922] ... max period:             00007fffffffffff
[    0.132923] ... fixed-purpose events:   3
[    0.132924] ... event mask:             000000070000000f
[    0.133070] signal: max sigframe size: 1776
[    0.133086] Estimated ratio of average max frequency by base frequency (times 1024): 1365
[    0.133115] rcu: Hierarchical SRCU implementation.
[    0.133116] rcu: 	Max phase no-delay instances is 1000.
[    0.133974] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.134058] smp: Bringing up secondary CPUs ...
[    0.134159] smpboot: x86: Booting SMP configuration:
[    0.134161] .... node  #0, CPUs:      #2 #4 #6 #1 #3 #5 #7
[    0.136673] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[    0.136687] smp: Brought up 1 node, 8 CPUs
[    0.136687] smpboot: Total of 8 processors activated (38308.75 BogoMIPS)
[    0.155548] node 0 deferred pages initialised in 12ms
[    0.155552] devtmpfs: initialized
[    0.155552] x86/mm: Memory block size: 128MB
[    0.157015] ACPI: PM: Registering ACPI NVS region [mem 0x9de7f000-0x9df7efff] (1048576 bytes)
[    0.157015] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.157015] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    0.157015] pinctrl core: initialized pinctrl subsystem
[    0.157416] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.157613] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[    0.157701] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.157779] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.157791] audit: initializing netlink subsys (disabled)
[    0.157802] audit: type=2000 audit(1721058053.072:1): state=initialized audit_enabled=0 res=1
[    0.157802] thermal_sys: Registered thermal governor 'fair_share'
[    0.157802] thermal_sys: Registered thermal governor 'bang_bang'
[    0.157802] thermal_sys: Registered thermal governor 'step_wise'
[    0.157802] thermal_sys: Registered thermal governor 'user_space'
[    0.157802] thermal_sys: Registered thermal governor 'power_allocator'
[    0.157802] cpuidle: using governor ladder
[    0.157802] cpuidle: using governor menu
[    0.157802] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.157802] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.157802] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff]
[    0.157802] PCI: Using configuration type 1 for base access
[    0.157802] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.157802] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.157802] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[    0.157802] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[    0.157802] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    0.157802] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[    0.157802] Demotion targets for Node 0: null
[    0.220627] raid6: avx2x4   gen() 15702 MB/s
[    0.288632] raid6: avx2x2   gen() 23597 MB/s
[    0.356633] raid6: avx2x1   gen() 21725 MB/s
[    0.356635] raid6: using algorithm avx2x2 gen() 23597 MB/s
[    0.424638] raid6: .... xor() 14098 MB/s, rmw enabled
[    0.424639] raid6: using avx2x2 recovery algorithm
[    0.428741] ACPI: Added _OSI(Module Device)
[    0.428743] ACPI: Added _OSI(Processor Device)
[    0.428745] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.428746] ACPI: Added _OSI(Processor Aggregator Device)
[    0.435257] ACPI: 7 ACPI AML tables successfully acquired and loaded
[    0.436722] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.440942] ACPI: Dynamic OEM Table Load:
[    0.440951] ACPI: SSDT 0xFFFF88A625C99C00 0003F3 (v01 PmRef  Cpu0Cst  00003001 INTL 20110112)
[    0.441607] ACPI: Dynamic OEM Table Load:
[    0.441613] ACPI: SSDT 0xFFFF88A738149000 0005DB (v01 PmRef  ApIst    00003000 INTL 20110112)
[    0.442291] ACPI: Dynamic OEM Table Load:
[    0.442297] ACPI: SSDT 0xFFFF88A625CAAE00 000119 (v01 PmRef  ApCst    00003000 INTL 20110112)
[    0.446117] ACPI: _OSC evaluated successfully for all CPUs
[    0.446171] ACPI: EC: EC started
[    0.446172] ACPI: EC: interrupt blocked
[    2.449837] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    2.449841] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions
[    2.449843] ACPI: Interpreter enabled
[    2.449871] ACPI: PM: (supports S0 S3 S4 S5)
[    2.449873] ACPI: Using IOAPIC for interrupt routing
[    2.449893] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    2.449895] PCI: Using E820 reservations for host bridge windows
[    2.450112] ACPI: Enabled 7 GPEs in block 00 to 3F
[    2.451756] ACPI: \_SB_.PCI0.HDEF.APPR: New power resource
[    2.455027] ACPI: \_SB_.PCI0.LPCB.SIO_.COM1.COMP: New power resource
[    2.455593] ACPI: \_SB_.PCI0.LPCB.SIO_.LPT0.LPP_: New power resource
[    2.458419] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    2.458427] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    2.458823] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR]
[    2.459744] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    2.459746] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    2.460279] PCI host bridge to bus 0000:00
[    2.460282] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    2.460284] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    2.460286] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    2.460288] pci_bus 0000:00: root bus resource [mem 0xbf200000-0xdfffffff window]
[    2.460289] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed3ffff window]
[    2.460291] pci_bus 0000:00: root bus resource [mem 0xfed45000-0xfedfffff window]
[    2.460292] pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff window]
[    2.460294] pci_bus 0000:00: root bus resource [bus 00-fe]
[    2.460309] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000 conventional PCI endpoint
[    2.460387] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000 conventional PCI endpoint
[    2.460396] pci 0000:00:02.0: BAR 0 [mem 0xd0000000-0xd03fffff 64bit]
[    2.460403] pci 0000:00:02.0: BAR 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[    2.460407] pci 0000:00:02.0: BAR 4 [io  0x3000-0x303f]
[    2.460424] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    2.460551] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300 PCIe Root Complex Integrated Endpoint
[    2.460560] pci 0000:00:03.0: BAR 0 [mem 0xd0730000-0xd0733fff 64bit]
[    2.460683] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 conventional PCI endpoint
[    2.460699] pci 0000:00:14.0: BAR 0 [mem 0xd0720000-0xd072ffff 64bit]
[    2.460754] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    2.460858] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 conventional PCI endpoint
[    2.460876] pci 0000:00:16.0: BAR 0 [mem 0xd0739000-0xd073900f 64bit]
[    2.460941] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    2.461002] pci 0000:00:19.0: [8086:153b] type 00 class 0x020000 conventional PCI endpoint
[    2.461016] pci 0000:00:19.0: BAR 0 [mem 0xd0700000-0xd071ffff]
[    2.461024] pci 0000:00:19.0: BAR 1 [mem 0xd073f000-0xd073ffff]
[    2.461032] pci 0000:00:19.0: BAR 2 [io  0x3080-0x309f]
[    2.461092] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    2.461168] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 conventional PCI endpoint
[    2.461184] pci 0000:00:1a.0: BAR 0 [mem 0xd073e000-0xd073e3ff]
[    2.461271] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    2.461351] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300 PCIe Root Complex Integrated Endpoint
[    2.461368] pci 0000:00:1b.0: BAR 0 [mem 0xd0734000-0xd0737fff 64bit]
[    2.461443] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    2.461523] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 PCIe Root Port
[    2.461548] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    2.461554] pci 0000:00:1c.0:   bridge window [mem 0xd0600000-0xd06fffff]
[    2.461620] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    2.461835] pci 0000:00:1c.6: [8086:8c1c] type 01 class 0x060400 PCIe Root Port
[    2.461860] pci 0000:00:1c.6: PCI bridge to [bus 02]
[    2.461866] pci 0000:00:1c.6:   bridge window [mem 0xd0500000-0xd05fffff]
[    2.461932] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[    2.462141] pci 0000:00:1c.7: [8086:8c1e] type 01 class 0x060400 PCIe Root Port
[    2.462166] pci 0000:00:1c.7: PCI bridge to [bus 03]
[    2.462173] pci 0000:00:1c.7:   bridge window [mem 0xd0400000-0xd04fffff]
[    2.462239] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[    2.462437] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 conventional PCI endpoint
[    2.462454] pci 0000:00:1d.0: BAR 0 [mem 0xd073d000-0xd073d3ff]
[    2.462541] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    2.462628] pci 0000:00:1f.0: [8086:8c4b] type 00 class 0x060100 conventional PCI endpoint
[    2.462813] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601 conventional PCI endpoint
[    2.462826] pci 0000:00:1f.2: BAR 0 [io  0x30a8-0x30af]
[    2.462834] pci 0000:00:1f.2: BAR 1 [io  0x30b4-0x30b7]
[    2.462841] pci 0000:00:1f.2: BAR 2 [io  0x30a0-0x30a7]
[    2.462849] pci 0000:00:1f.2: BAR 3 [io  0x30b0-0x30b3]
[    2.462856] pci 0000:00:1f.2: BAR 4 [io  0x3060-0x307f]
[    2.462863] pci 0000:00:1f.2: BAR 5 [mem 0xd073c000-0xd073c7ff]
[    2.462902] pci 0000:00:1f.2: PME# supported from D3hot
[    2.462975] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 conventional PCI endpoint
[    2.462991] pci 0000:00:1f.3: BAR 0 [mem 0xd0738000-0xd07380ff 64bit]
[    2.463011] pci 0000:00:1f.3: BAR 4 [io  0xef80-0xef9f]
[    2.463118] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    2.463254] pci 0000:02:00.0: [8086:088e] type 00 class 0x028000 PCIe Endpoint
[    2.463323] pci 0000:02:00.0: BAR 0 [mem 0xd0500000-0xd0501fff 64bit]
[    2.463626] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    2.463967] pci 0000:00:1c.6: PCI bridge to [bus 02]
[    2.464092] pci 0000:03:00.0: [10ec:5227] type 00 class 0xff0000 PCIe Endpoint
[    2.464150] pci 0000:03:00.0: BAR 0 [mem 0xd0400000-0xd0400fff]
[    2.464447] pci 0000:03:00.0: supports D1 D2
[    2.464448] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
[    2.464714] pci 0000:00:1c.7: PCI bridge to [bus 03]
[    2.465757] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[    2.465793] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[    2.465826] ACPI: PCI: Interrupt link LNKC configured for IRQ 10
[    2.465859] ACPI: PCI: Interrupt link LNKD configured for IRQ 10
[    2.465891] ACPI: PCI: Interrupt link LNKE configured for IRQ 11
[    2.465924] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[    2.465926] ACPI: PCI: Interrupt link LNKF disabled
[    2.465958] ACPI: PCI: Interrupt link LNKG configured for IRQ 5
[    2.465990] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[    2.465991] ACPI: PCI: Interrupt link LNKH disabled
[    2.466354] ACPI: EC: interrupt unblocked
[    2.466356] ACPI: EC: event unblocked
[    2.466359] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    2.466360] ACPI: EC: GPE=0x16
[    2.466362] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC initialization complete
[    2.466364] ACPI: \_SB_.PCI0.LPCB.EC0_: EC: Used to handle transactions and events
[    2.468640] iommu: Default domain type: Translated
[    2.468640] iommu: DMA domain TLB invalidation policy: lazy mode
[    2.468739] SCSI subsystem initialized
[    2.468748] libata version 3.00 loaded.
[    2.468748] ACPI: bus type USB registered
[    2.468748] usbcore: registered new interface driver usbfs
[    2.468748] usbcore: registered new interface driver hub
[    2.468748] usbcore: registered new device driver usb
[    2.468748] pps_core: LinuxPPS API ver. 1 registered
[    2.468748] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    2.468748] PTP clock support registered
[    2.468748] EDAC MC: Ver: 3.0.0
[    2.468841] NetLabel: Initializing
[    2.468843] NetLabel:  domain hash size = 128
[    2.468845] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    2.468862] NetLabel:  unlabeled traffic allowed by default
[    2.468864] PCI: Using ACPI for IRQ routing
[    2.472593] PCI: pci_cache_line_size set to 64 bytes
[    2.476692] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff]
[    2.476694] e820: reserve RAM buffer [mem 0x9cb7f000-0x9fffffff]
[    2.476696] e820: reserve RAM buffer [mem 0x9e000000-0x9fffffff]
[    2.476697] e820: reserve RAM buffer [mem 0x23fe00000-0x23fffffff]
[    2.476715] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    2.476715] pci 0000:00:02.0: vgaarb: bridge control possible
[    2.476715] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    2.476715] vgaarb: loaded
[    2.476715] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    2.476715] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    2.478727] clocksource: Switched to clocksource tsc-early
[    2.479404] VFS: Disk quotas dquot_6.6.0
[    2.479417] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    2.479551] AppArmor: AppArmor Filesystem Enabled
[    2.479567] pnp: PnP ACPI init
[    2.479725] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    2.479729] system 00:00: [mem 0xfed10000-0xfed17fff] could not be reserved
[    2.479731] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[    2.479733] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[    2.479735] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[    2.479737] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[    2.479739] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
[    2.479741] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[    2.479742] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
[    2.479744] system 00:00: [mem 0xbf210000-0xbf21ffff] has been reserved
[    2.479894] system 00:01: [io  0x0200-0x027f] has been reserved
[    2.479897] system 00:01: [io  0xffff] has been reserved
[    2.479899] system 00:01: [io  0xffff] has been reserved
[    2.479900] system 00:01: [io  0xffff] has been reserved
[    2.479902] system 00:01: [io  0x1800-0x18fe] has been reserved
[    2.479903] system 00:01: [io  0xef80-0xef9f] has been reserved
[    2.479949] system 00:02: [io  0x0800-0x087f] has been reserved
[    2.479949] pnp 00:05: [dma 0 disabled]
[    2.479949] system 00:08: [mem 0x20000000-0x201fffff] could not be reserved
[    2.479949] system 00:08: [mem 0x40004000-0x40004fff] could not be reserved
[    2.479949] pnp: PnP ACPI: found 10 devices
[    2.484833] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    2.484895] NET: Registered PF_INET protocol family
[    2.484994] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    2.502089] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    2.502124] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    2.502174] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    2.502370] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[    2.502664] TCP: Hash tables configured (established 65536 bind 65536)
[    2.502741] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear)
[    2.502774] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    2.502800] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    2.502852] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    2.502860] NET: Registered PF_XDP protocol family
[    2.502869] pci 0000:00:1c.7: bridge window [io  0x1000-0x0fff] to [bus 03] add_size 1000
[    2.502874] pci 0000:00:1c.7: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[    2.502885] pci 0000:00:1c.7: bridge window [mem 0xbf300000-0xbf4fffff 64bit pref]: assigned
[    2.502888] pci 0000:00:1c.7: bridge window [io  0x2000-0x2fff]: assigned
[    2.502892] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    2.502897] pci 0000:00:1c.0:   bridge window [mem 0xd0600000-0xd06fffff]
[    2.502906] pci 0000:00:1c.6: PCI bridge to [bus 02]
[    2.502910] pci 0000:00:1c.6:   bridge window [mem 0xd0500000-0xd05fffff]
[    2.502918] pci 0000:00:1c.7: PCI bridge to [bus 03]
[    2.502921] pci 0000:00:1c.7:   bridge window [io  0x2000-0x2fff]
[    2.502926] pci 0000:00:1c.7:   bridge window [mem 0xd0400000-0xd04fffff]
[    2.502929] pci 0000:00:1c.7:   bridge window [mem 0xbf300000-0xbf4fffff 64bit pref]
[    2.502936] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    2.502939] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    2.502940] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    2.502942] pci_bus 0000:00: resource 7 [mem 0xbf200000-0xdfffffff window]
[    2.502943] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfed3ffff window]
[    2.502945] pci_bus 0000:00: resource 9 [mem 0xfed45000-0xfedfffff window]
[    2.502946] pci_bus 0000:00: resource 10 [mem 0xfee01000-0xffffffff window]
[    2.502948] pci_bus 0000:01: resource 1 [mem 0xd0600000-0xd06fffff]
[    2.502950] pci_bus 0000:02: resource 1 [mem 0xd0500000-0xd05fffff]
[    2.502952] pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
[    2.502953] pci_bus 0000:03: resource 1 [mem 0xd0400000-0xd04fffff]
[    2.502955] pci_bus 0000:03: resource 2 [mem 0xbf300000-0xbf4fffff 64bit pref]
[    2.503050] pci 0000:00:14.0: enabling device (0000 -> 0002)
[    2.503646] PCI: CLS 64 bytes, default 64
[    2.503662] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    2.503663] software IO TLB: mapped [mem 0x0000000098b7f000-0x000000009cb7f000] (64MB)
[    2.503724] Trying to unpack rootfs image as initramfs...
[    2.504188] Initialise system trusted keyrings
[    2.504199] Key type blacklist registered
[    2.504270] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[    2.504280] zbud: loaded
[    2.504469] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    2.504499] ntfs3: Read-only LZX/Xpress compression included
[    2.504508] fuse: init (API version 7.40)
[    2.504768] SGI XFS with ACLs, security attributes, realtime, quota, no debug enabled
[    2.505356] integrity: Platform Keyring initialized
[    2.505363] integrity: Machine keyring initialized
[    2.505373] xor: automatically using best checksumming function   avx       
[    2.505377] Key type asymmetric registered
[    2.505378] Asymmetric key parser 'x509' registered
[    2.529662] Freeing initrd memory: 16000K
[    2.530710] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    2.530748] io scheduler mq-deadline registered
[    2.532787] pcieport 0000:00:1c.0: PME: Signaling with IRQ 24
[    2.533005] pcieport 0000:00:1c.6: PME: Signaling with IRQ 25
[    2.533197] pcieport 0000:00:1c.7: PME: Signaling with IRQ 26
[    2.533222] pcieport 0000:00:1c.7: pciehp: Slot #7 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[    2.533348] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    2.558403] thermal LNXTHERM:00: registered as thermal_zone0
[    2.558409] ACPI: thermal: Thermal Zone [CPUZ] (66 C)
[    2.582608] thermal LNXTHERM:01: registered as thermal_zone1
[    2.582614] ACPI: thermal: Thermal Zone [GFXZ] (0 C)
[    2.597696] thermal LNXTHERM:02: registered as thermal_zone2
[    2.597702] ACPI: thermal: Thermal Zone [EXTZ] (43 C)
[    2.612841] thermal LNXTHERM:03: registered as thermal_zone3
[    2.612846] ACPI: thermal: Thermal Zone [LOCZ] (50 C)
[    2.627986] thermal LNXTHERM:04: registered as thermal_zone4
[    2.627992] ACPI: thermal: Thermal Zone [BATZ] (35 C)
[    2.628268] thermal LNXTHERM:05: registered as thermal_zone5
[    2.628270] ACPI: thermal: Thermal Zone [PCHZ] (114 C)
[    2.628434] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    2.628611] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    2.629430] Linux agpgart interface v0.103
[    2.633088] tpm_tis 00:09: 1.2 TPM (device-id 0xB, rev-id 16)
[    2.664322] loop: module loaded
[    2.675176] usbcore: registered new interface driver rtsx_usb
[    2.675444] ahci 0000:00:1f.2: version 3.0
[    2.675637] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    2.675670] ahci 0000:00:1f.2: AHCI vers 0001.0300, 32 command slots, 6 Gbps, SATA mode
[    2.675673] ahci 0000:00:1f.2: 5/6 ports implemented (port mask 0x37)
[    2.675675] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst 
[    2.722636] scsi host0: ahci
[    2.722957] scsi host1: ahci
[    2.723203] scsi host2: ahci
[    2.723354] scsi host3: ahci
[    2.723494] scsi host4: ahci
[    2.723640] scsi host5: ahci
[    2.723684] ata1: SATA max UDMA/133 abar m2048@0xd073c000 port 0xd073c100 irq 28 lpm-pol 3
[    2.723687] ata2: SATA max UDMA/133 abar m2048@0xd073c000 port 0xd073c180 irq 28 lpm-pol 3
[    2.723690] ata3: SATA max UDMA/133 abar m2048@0xd073c000 port 0xd073c200 irq 28 lpm-pol 0
[    2.723691] ata4: DUMMY
[    2.723693] ata5: SATA max UDMA/133 abar m2048@0xd073c000 port 0xd073c300 irq 28 lpm-pol 0
[    2.723696] ata6: SATA max UDMA/133 abar m2048@0xd073c000 port 0xd073c380 irq 28 lpm-pol 0
[    2.724252] scsi host6: pata_legacy
[    2.724285] ata7: PATA max PIO4 cmd 0x1f0 ctl 0x3f6 irq 14 lpm-pol 0
[    3.037370] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    3.038915] ata1.00: ATA-9: TEAM T253512GB, V1027A0, max UDMA/133
[    3.039765] ata1.00: 1000215216 sectors, multi 1: LBA48 NCQ (depth 32), AA
[    3.043304] ata1.00: configured for UDMA/133
[    3.053651] scsi 0:0:0:0: Direct-Access     ATA      TEAM T253512GB   7A0  PQ: 0 ANSI: 5
[    3.054211] sd 0:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/477 GiB)
[    3.054225] sd 0:0:0:0: [sda] Write Protect is off
[    3.054228] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.054245] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.054275] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[    3.054814]  sda: sda1 sda2 sda3
[    3.055070] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.369363] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    3.398709] ata2.00: ATA-10: ST500LM034-2GH17A, 1001, max UDMA/133
[    3.483771] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    3.505958] tsc: Refined TSC clocksource calibration: 2394.442 MHz
[    3.505970] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2283b520906, max_idle_ns: 440795282364 ns
[    3.506006] clocksource: Switched to clocksource tsc
[    3.533273] ata2.00: configured for UDMA/133
[    3.542531] scsi 1:0:0:0: Direct-Access     ATA      ST500LM034-2GH17 1001 PQ: 0 ANSI: 5
[    3.542893] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    3.542897] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[    3.542958] sd 1:0:0:0: [sdb] Write Protect is off
[    3.542962] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    3.543080] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.543312] sd 1:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes
[    3.555732]  sdb: sdb1
[    3.555803] sd 1:0:0:0: [sdb] Attached SCSI disk
[    3.857352] ata3: SATA link down (SStatus 0 SControl 300)
[    4.173351] ata5: SATA link down (SStatus 0 SControl 300)
[    4.489363] ata6: SATA link down (SStatus 0 SControl 300)
[    4.502708] scsi host6: pata_legacy
[    4.502753] ata8: PATA max PIO4 cmd 0x170 ctl 0x376 irq 15 lpm-pol 0
[    4.678527] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    4.678540] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    4.678560] ehci-pci 0000:00:1a.0: debug port 2
[    4.682492] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd073e000
[    4.697964] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    4.698340] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.09
[    4.698344] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.698346] usb usb1: Product: EHCI Host Controller
[    4.698348] usb usb1: Manufacturer: Linux 6.9.7 ehci_hcd
[    4.698350] usb usb1: SerialNumber: 0000:00:1a.0
[    4.698634] hub 1-0:1.0: USB hub found
[    4.698680] hub 1-0:1.0: 2 ports detected
[    4.698972] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    4.698981] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    4.700061] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
[    4.700252] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    4.700259] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
[    4.700279] ehci-pci 0000:00:1d.0: debug port 2
[    4.700288] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    4.700292] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    4.700294] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[    4.700368] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.09
[    4.700372] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.700374] usb usb2: Product: xHCI Host Controller
[    4.700376] usb usb2: Manufacturer: Linux 6.9.7 xhci-hcd
[    4.700377] usb usb2: SerialNumber: 0000:00:14.0
[    4.700561] hub 2-0:1.0: USB hub found
[    4.700584] hub 2-0:1.0: 14 ports detected
[    4.701330] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.09
[    4.701334] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.701336] usb usb4: Product: xHCI Host Controller
[    4.701337] usb usb4: Manufacturer: Linux 6.9.7 xhci-hcd
[    4.701339] usb usb4: SerialNumber: 0000:00:14.0
[    4.701481] hub 4-0:1.0: USB hub found
[    4.701498] hub 4-0:1.0: 6 ports detected
[    4.702030] usbcore: registered new interface driver uas
[    4.702043] usbcore: registered new interface driver usb-storage
[    4.702049] usbcore: registered new interface driver ums-realtek
[    4.702099] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    4.703210] i8042: Detected active multiplexing controller, rev 1.1
[    4.703873] serio: i8042 KBD port at 0x60,0x64 irq 1
[    4.703878] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    4.703909] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    4.703929] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    4.703947] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    4.704132] mousedev: PS/2 mouse device common for all mice
[    4.704157] rtc_cmos 00:03: RTC can wake from S4
[    4.704216] ehci-pci 0000:00:1d.0: irq 17, io mem 0xd073d000
[    4.704417] rtc_cmos 00:03: registered as rtc0
[    4.704455] rtc_cmos 00:03: setting system clock to 2024-07-15T15:40:57 UTC (1721058057)
[    4.704485] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram
[    4.704638] intel_pstate: Intel P-state driver initializing
[    4.705020] sdhci: Secure Digital Host Controller Interface driver
[    4.705024] sdhci: Copyright(c) Pierre Ossman
[    4.705090] wbsd: Winbond W83L51xD SD/MMC card interface driver
[    4.705093] wbsd: Copyright(c) Pierre Ossman
[    4.705145] sdhci-pltfm: SDHCI platform and OF driver helper
[    4.715626] ledtrig-cpu: registered to indicate activity on CPUs
[    4.715807] hid: raw HID events driver (C) Jiri Kosina
[    4.715848] usbcore: registered new interface driver usbhid
[    4.715849] usbhid: USB HID core driver
[    4.716001] NET: Registered PF_INET6 protocol family
[    4.717032] Segment Routing with IPv6
[    4.717042] In-situ OAM (IOAM) with IPv6
[    4.717059] mip6: Mobile IPv6
[    4.717062] NET: Registered PF_PACKET protocol family
[    4.717112] mpls_gso: MPLS GSO support
[    4.717466] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    4.717550] microcode: Current revision: 0x00000028
[    4.717666] IPI shorthand broadcast: enabled
[    4.717906] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    4.717968] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.09
[    4.717971] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.717973] usb usb3: Product: EHCI Host Controller
[    4.717974] usb usb3: Manufacturer: Linux 6.9.7 ehci_hcd
[    4.717975] usb usb3: SerialNumber: 0000:00:1d.0
[    4.718157] hub 3-0:1.0: USB hub found
[    4.718168] hub 3-0:1.0: 2 ports detected
[    4.719201] sched_clock: Marking stable (4716102347, 1883993)->(4722687333, -4700993)
[    4.719307] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[    4.719395] registered taskstats version 1
[    4.719468] Loading compiled-in X.509 certificates
[    4.721073] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    4.721121] Key type .fscrypt registered
[    4.721124] Key type fscrypt-provisioning registered
[    4.721741] Btrfs loaded, zoned=yes, fsverity=yes
[    4.722610] Key type encrypted registered
[    4.722615] AppArmor: AppArmor sha256 policy hashing enabled
[    4.722624] ima: Allocated hash algorithm: sha256
[    4.769109] ima: No architecture policies found
[    4.769129] evm: Initialising EVM extended attributes:
[    4.769130] evm: security.selinux
[    4.769131] evm: security.SMACK64 (disabled)
[    4.769133] evm: security.SMACK64EXEC (disabled)
[    4.769134] evm: security.SMACK64TRANSMUTE (disabled)
[    4.769135] evm: security.SMACK64MMAP (disabled)
[    4.769135] evm: security.apparmor
[    4.769136] evm: security.ima
[    4.769137] evm: security.capability
[    4.769138] evm: HMAC attrs: 0x1
[    4.861460] RAS: Correctable Errors collector initialized.
[    4.872515] clk: Disabling unused clocks
[    4.872519] PM: genpd: Disabling unused power domains
[    4.873657] Freeing unused decrypted memory: 2028K
[    4.874270] Freeing unused kernel image (initmem) memory: 4700K
[    4.874320] Write protecting the kernel read-only data: 36864k
[    4.874890] Freeing unused kernel image (rodata/data gap) memory: 1860K
[    4.913131] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    4.913134] x86/mm: Checking user space page tables
[    4.949724] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    4.949735] Run /init as init process
[    4.949737]   with arguments:
[    4.949749]     /init
[    4.949750]   with environment:
[    4.949750]     HOME=/
[    4.949751]     TERM=linux
[    4.949752]     BOOT_IMAGE=vmlinuz
[    4.949753]     pfix=fsckp,fsck
[    4.949754]     pmedia=usbflash
[    4.949755]     pupsfs=d75fbfeb-39be-48c9-922b-c6e2effd9940
[    4.949756]     psave=d75fbfeb-39be-48c9-922b-c6e2effd9940
[    4.957915] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    4.969903] usb 2-2: new high-speed USB device number 2 using xhci_hcd
[    4.973945] usb 3-1: new high-speed USB device number 2 using ehci-pci
[    5.119710] usb 2-2: New USB device found, idVendor=346d, idProduct=5678, bcdDevice= 2.00
[    5.119715] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    5.119717] usb 2-2: Product: Disk 2.0
[    5.119719] usb 2-2: Manufacturer: USB
[    5.119721] usb 2-2: SerialNumber: 8042191070190471532
[    5.120607] usb-storage 2-2:1.0: USB Mass Storage device detected
[    5.120841] scsi host6: usb-storage 2-2:1.0
[    5.126420] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.04
[    5.126424] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    5.126741] hub 1-1:1.0: USB hub found
[    5.126802] hub 1-1:1.0: 6 ports detected
[    5.138331] usb 3-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.04
[    5.138335] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    5.138603] hub 3-1:1.0: USB hub found
[    5.138694] hub 3-1:1.0: 8 ports detected
[    5.245950] usb 2-5: new full-speed USB device number 3 using xhci_hcd
[    5.339391] block device autoloading is deprecated and will be removed.
[    5.339617] block device autoloading is deprecated and will be removed.
[    5.339854] block device autoloading is deprecated and will be removed.
[    5.340092] block device autoloading is deprecated and will be removed.
[    5.340347] block device autoloading is deprecated and will be removed.
[    5.340570] block device autoloading is deprecated and will be removed.
[    5.340747] block device autoloading is deprecated and will be removed.
[    5.340925] block device autoloading is deprecated and will be removed.
[    5.395384] usb 2-5: New USB device found, idVendor=138a, idProduct=003f, bcdDevice= 1.04
[    5.395390] usb 2-5: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[    5.395392] usb 2-5: SerialNumber: 002072afe793
[    5.521957] usb 2-7: new high-speed USB device number 4 using xhci_hcd
[    5.722118] usb 2-7: New USB device found, idVendor=0c45, idProduct=6321, bcdDevice= 0.00
[    5.722124] usb 2-7: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[    5.722126] usb 2-7: Product: USB 2.0 Camera
[    5.722128] usb 2-7: Manufacturer: Sonix Technology Co., Ltd.
[    5.853959] usb 2-12: new full-speed USB device number 5 using xhci_hcd
[    6.005855] usb 2-12: New USB device found, idVendor=8087, idProduct=07da, bcdDevice=78.69
[    6.005863] usb 2-12: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    6.130732] scsi 6:0:0:0: Direct-Access     VendorCo ProductCode      2.00 PQ: 0 ANSI: 4
[    6.132131] sd 6:0:0:0: [sdc] 61440000 512-byte logical blocks: (31.5 GB/29.3 GiB)
[    6.132273] sd 6:0:0:0: [sdc] Write Protect is off
[    6.132277] sd 6:0:0:0: [sdc] Mode Sense: 03 00 00 00
[    6.132396] sd 6:0:0:0: [sdc] No Caching mode page found
[    6.132398] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[    6.134418]  sdc: sdc1 sdc2
[    6.134508] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[    6.511743] EXT4-fs (sdc2): mounted filesystem d75fbfeb-39be-48c9-922b-c6e2effd9940 r/w without journal. Quota mode: none.
[    6.584966] loop0: detected capacity change from 0 to 894560
[    6.598035] overlayfs: "xino" feature enabled using 2 upper inode bits.
[   16.514249] overlayfs: "xino" feature enabled using 3 upper inode bits.
[   16.524957] loop1: detected capacity change from 0 to 386080
[   16.536113] overlayfs: "xino" feature enabled using 3 upper inode bits.
[   16.538273] loop2: detected capacity change from 0 to 78976
[   16.551780] overlayfs: "xino" feature enabled using 4 upper inode bits.
[   16.554023] loop3: detected capacity change from 0 to 34080
[   16.565997] overlayfs: "xino" feature enabled using 4 upper inode bits.
[   16.568282] loop4: detected capacity change from 0 to 234856
[   16.581190] overlayfs: "xino" feature enabled using 4 upper inode bits.
[   16.583433] loop5: detected capacity change from 0 to 166072
[   16.594694] overlayfs: "xino" feature enabled using 4 upper inode bits.
[   16.916794] evm: overlay not supported
[   17.505014] fscrypt: AES-256-CBC-CTS using implementation "cts(cbc(ecb(aes-generic)))"
[   17.844781] acpi_cpufreq: module verification failed: signature and/or required key missing - tainting kernel
[   17.865653] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5
[   17.865689] ACPI: button: Sleep Button [SLPB]
[   17.865735] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input6
[   17.865800] ACPI: button: Lid Switch [LID]
[   17.865836] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[   17.878377] ACPI: AC: AC Adapter [AC] (on-line)
[   17.881936] ACPI: button: Power Button [PWRF]
[   17.882387] input: PC Speaker as /devices/platform/pcspkr/input/input8
[   17.886493] ACPI: battery: Slot [BAT0] (battery present)
[   17.947134] wmi_bus wmi_bus-PNP0C14:00: [Firmware Info]: 8F1F6436-9F42-42C8-BADC-0E9424F20C9A has zero instances
[   17.950152] hp_accel: laptop model unknown, using default axes configuration
[   17.962835] EDAC ie31200: No ECC support
[   17.962864] EDAC ie31200: No ECC support
[   17.970463] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20230628/utaddress-204)
[   17.970471] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[   17.970479] ACPI Warning: SystemIO range 0x0000000000000840-0x000000000000084F conflicts with OpRegion 0x0000000000000800-0x0000000000000BFF (\GPIO) (20230628/utaddress-204)
[   17.970483] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[   17.970484] ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083F conflicts with OpRegion 0x0000000000000800-0x000000000000083F (\GPRL) (20230628/utaddress-204)
[   17.970487] ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083F conflicts with OpRegion 0x0000000000000800-0x0000000000000BFF (\GPIO) (20230628/utaddress-204)
[   17.970490] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[   17.970491] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000083F (\GPRL) (20230628/utaddress-204)
[   17.970494] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x0000000000000BFF (\GPIO) (20230628/utaddress-204)
[   17.970497] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000810-0x0000000000000813 (\IO_D) (20230628/utaddress-204)
[   17.970500] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000080F (\IO_T) (20230628/utaddress-204)
[   17.970503] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[   17.970503] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   18.003333] parport_pc 00:05: reported by Plug and Play ACPI
[   18.003399] parport0: PC-style at 0x378 (0x778), irq 5 [PCSPP,TRISTATE,EPP]
[   18.081718] lis3lv02d: 8 bits 3DC sensor found
[   18.088888] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   18.088923] sd 1:0:0:0: Attached scsi generic sg1 type 0
[   18.088960] sd 6:0:0:0: Attached scsi generic sg2 type 0
[   18.223933] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[   18.223938] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[   18.223940] RAPL PMU: hw unit of domain package 2^-14 Joules
[   18.223941] RAPL PMU: hw unit of domain dram 2^-14 Joules
[   18.223942] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[   18.257973] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input12
[   18.294101] i801_smbus 0000:00:1f.3: SPD Write Disable is set
[   18.294133] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[   18.454193] e1000e: Intel(R) PRO/1000 Network Driver
[   18.454197] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[   18.454410] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[   18.527902] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[   18.596847] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 14:58:d0:03:ad:c5
[   18.596854] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[   18.596885] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
[   18.670961] input: HP WMI hotkeys as /devices/virtual/input/input13
[   18.703862] ppdev: user-space parallel port driver
[   18.723165] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[   18.749069] cryptd: max_cpu_qlen set to 1000
[   18.807835] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[   18.881033] psmouse serio3: synaptics: queried max coordinates: x [..5658], y [..4746]
[   18.916381] psmouse serio3: synaptics: queried min coordinates: x [1368..], y [1240..]
[   18.916389] psmouse serio3: synaptics: Your touchpad (PNP: SYN3002 SYN0100 SYN0002 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
[   18.974804] psmouse serio3: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x26800/0x0, board id: 2759, fw id: 1499454
[   18.987191] iTCO_vendor_support: vendor-support=0
[   19.011975] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio3/input/input11
[   19.169828] iTCO_wdt iTCO_wdt.1.auto: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)
[   19.170001] iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0)
[   19.170445] AVX2 version of gcm_enc/dec engaged.
[   19.170481] AES CTR mode by8 optimization enabled
[   19.197496] mc: Linux media interface: v0.10
[   19.258133] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   19.266155] Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf'
[   19.266316] Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
[   19.266506] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   19.266700] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[   19.371768] videodev: Linux video capture interface: v2.00
[   19.409163] ACPI: bus type drm_connector registered
[   19.416705] Intel(R) Wireless WiFi driver for Linux
[   19.416905] iwlwifi 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[   19.423818] iwlwifi 0000:02:00.0: Detected crf-id 0xa5a5a5a1, cnv-id 0xa5a5a5a1 wfpm id 0xa5a5a5a1
[   19.423856] iwlwifi 0000:02:00.0: PCI dev 088e/4060, rev=0xb0, rfid=0xd55555d5
[   19.472768] iwlwifi 0000:02:00.0: loaded firmware version 18.168.6.1 6000g2b-6.ucode op_mode iwldvm
[   19.484645] Bluetooth: Core ver 2.22
[   19.484665] NET: Registered PF_BLUETOOTH protocol family
[   19.484666] Bluetooth: HCI device and connection manager initialized
[   19.484670] Bluetooth: HCI socket layer initialized
[   19.484672] Bluetooth: L2CAP socket layer initialized
[   19.484675] Bluetooth: SCO socket layer initialized
[   19.493619] usb 2-7: Found UVC 1.00 device USB 2.0 Camera (0c45:6321)
[   19.527037] usbcore: registered new interface driver uvcvideo
[   19.615943] usbcore: registered new interface driver btusb
[   19.616747] snd_hda_codec_idt hdaudioC0D0: autoconfig for 92HD91BXX: line_outs=1 (0xa/0x0/0x0/0x0/0x0) type:line
[   19.616753] snd_hda_codec_idt hdaudioC0D0:    speaker_outs=1 (0xd/0x0/0x0/0x0/0x0)
[   19.616756] snd_hda_codec_idt hdaudioC0D0:    hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
[   19.616759] snd_hda_codec_idt hdaudioC0D0:    mono: mono_out=0x0
[   19.616760] snd_hda_codec_idt hdaudioC0D0:    inputs:
[   19.616762] snd_hda_codec_idt hdaudioC0D0:      Mic=0xc
[   19.616765] snd_hda_codec_idt hdaudioC0D0:      Internal Mic=0x11
[   19.616767] snd_hda_codec_idt hdaudioC0D0:      Line=0xf
[   19.616999] Bluetooth: hci0: unexpected event for opcode 0x0000
[   19.782883] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[   19.782955] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[   19.783015] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[   19.783066] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[   19.783107] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
[   20.147509] i915 0000:00:02.0: vgaarb: deactivate vga console
[   20.147992] Console: switching to colour dummy device 80x25
[   20.148197] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
[   20.148202] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[   20.148204] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[   20.148206] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Advanced-N 6235 AGN, REV=0xB0
[   20.149003] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   20.176903] intel_rapl_common: Found RAPL domain package
[   20.176907] intel_rapl_common: Found RAPL domain core
[   20.176908] intel_rapl_common: Found RAPL domain uncore
[   20.176909] intel_rapl_common: Found RAPL domain dram
[   20.182228] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[   20.184748] iwlwifi 0000:02:00.0 wlo1: renamed from wlan0
[   20.978524] [drm] Initialized i915 1.6.0 20230929 for 0000:00:02.0 on minor 0
[   20.979777] ACPI: video: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   20.979928] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input20
[   21.016535] fbcon: i915drmfb (fb0) is primary device
[   22.130539] Console: switching to colour frame buffer device 170x48
[   22.150786] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[   22.155434] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   22.161588] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card1/input21
[   22.161728] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card1/input22
[   22.161856] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card1/input23
[   22.340554] zram: Added device: zram0
[   22.346410] zram0: detected capacity change from 0 to 14759592
[   22.434496] Adding 7379792k swap on /dev/zram0.  Priority:-2 extents:1 across:7379792k SS
[   29.675233] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   29.675238] Bluetooth: BNEP filters: protocol multicast
[   29.675242] Bluetooth: BNEP socket layer initialized
[   29.677058] Bluetooth: MGMT ver 1.22
[   29.698783] NET: Registered PF_ALG protocol family
[   32.872882] fscrypt: AES-256-XTS using implementation "xts-aes-aesni"
[   38.718037] Bluetooth: RFCOMM TTY layer initialized
[   38.718047] Bluetooth: RFCOMM socket layer initialized
[   38.718053] Bluetooth: RFCOMM ver 1.11
root@puppypc:~#

[dimkr]

@alibadrelsayed Same problem as any other distro, you'll need some workaround (see https://wiki.archlinux.org/title/NTFS) until ntfs3 becomes a first class citizen.

[alibadrelsayed]

thanks a lot dimkr for your time, I have vanilladpup-10.0.56 installed in another flash and it works fine with NTFS, I also have EasyOS 6.1, Ubuntu 24.04 and Mint 21.3, all of them work fine with my NTFS partitions in both HHD and SSD, it's first time to happen, so if you can kindly find a way to solve that in the coming build of vanilladpup-11.0.x will be a great job, thanks again.

[alibadrelsayed]

I try this in terminal:
# mount -t ntfs3 /dev/sda3 /mnt
it finally mounted, still if you work around that in the coming release it is appreciated.

[d-pupp]

Just setup dpup 11.0.157. So far it is running well.
I like the the taskbar change to icons only. I made that one myself in 150
The Help is very helpful. Short and easy to use.
One thing I have noticed. Sometimes waybar doesn't recognize I'm clicking on it and I get the menu instead.
Is there a way to start cups from a menu or shortcut? Thinking of newbies here.
Would you be interested in making a portable yad app to mount img files? The reason I'm asking is I use 11 full time and only use 10 to install a upgrade of 11. Using losetup and mount is not hard once you know what the commands are but for someone new wanting to do a furgal install it can be challenging. I know it was for me. A portable yad app to mount the img would make it easy for anyone to use. Just a thought.
Thanks

[dimkr]

Is there a way to start cups from a menu or shortcut? Thinking of newbies here.

It should be already running, it's started by the init script (/etc/init.d/cups).

Would you be interested in making a portable yad app to mount img files?

Maybe, I'll give it a try.

---

11.0.158 should speed up web browsing by reimplementing the classic pup-advert-blocker. I wrote a NSS module that hashes a domain and performs binary search in a sorted array of hashes that's created beforehand and gets mapped to memory. This is waaaaay faster than the traditional solution of lookup inside a /etc/hosts that has >150k lines. In addition, it's nice to be able to modify /etc/hosts without worrying about breaking ad blocking, and the 4.4 MB /etc/hosts is replaced with a much smaller 1.2 MB binary file.

Everything is in https://github.com/vanilla-dpup/woof-CE ... rt_blocker if you want to use this in another distro.

EDIT: forgot to mention, I also simplified firewall_ng a lot. The list of firewall rules is now much shorter (it's a short "what not to drop" list, rather than a long "what to drop" list), and it no longer does router-specific things that make no sense on a desktop computer while making the firewall slower to start. I have no idea if this simplification also affects overall network performance or reduces CPU consumption, but maybe it does.

[d-pupp]

It should be already running, it's started by the init script (/etc/init.d/cups).

Sorry for the misunderstanding. I was asking about the cup web interface localhost:631
I did a .desktop file to start it for printer setup and config. All it would need in a menu entry

11.0.158 should speed up web browsing by reimplementing the classic pup-advert-blocker. I wrote a NSS module that hashes a domain and performs binary search in a sorted array of hashes that's created beforehand and gets mapped to memory. This is waaaaay faster than the traditional solution of lookup inside a /etc/hosts that has >150k lines. In addition, it's nice to be able to modify /etc/hosts without worrying about breaking ad blocking, and the 4.4 MB /etc/hosts is replaced with a much smaller 1.2 MB binary file.

This sounds like a really good idea. Smaller and faster are always better

EDIT: forgot to mention, I also simplified firewall_ng a lot. The list of firewall rules is now much shorter (it's a short "what not to drop" list, rather than a long "what to drop" list), and it no longer does router-specific things that make no sense on a desktop computer while making the firewall slower to start. I have no idea if this simplification also affects overall network performance or reduces CPU consumption, but maybe it does.

This too makes a lot of sense.
A shorter rules list and a faster ad-blocker should make browsing faster.
Thanks

[dimkr]

11.0.159 will:
1. Update to labwc 0.7.3
2. Hide window contents and display only the outline while resizing; this should be good for old computers that struggle to redraw window contents on each mouse movement event
3. Disable more Firefox anti-features including some that will be introduced in 128 ESR
4. Add more sysfs security hardening
5. Add more documentation

[d-pupp]

New install of dpup 11.0.159
Only been using it for an hour but so far all it good.
This is just the feel of it but browsing does seem faster.
The host file looks funny with only 4 entries
Question is the new ad-blocker on by default?
I checked out the rules in iptables it is a very short list
Question I see the policy for forwarding and Output is accept. Can you explain please?

[dimkr]

The new ad blocker is on, but it doesn't use /etc/hosts. It has its own file.

iptables rules in FORWARD make no sense unless your computer is configured to act as a router, so it's OK not to block any forwarded packets (there aren't any). Allowing all sent packets also makes sense - the firewall only blocks incoming connections. Blocking outgoing connections might make sense in a server, but not in a personal computer.

[d-pupp]

@dimkr
When I install 11.0.159 I didn't use my old save file. I created and used a new one. However it didn't save anything until I rebooted. Is this the default or is there a way to get the save to work without a reboot?

Edit Just wanted to let you know the delays on this forum have disappeared since upgrading to 11.0.159

[dimkr]

@d-pupp If you create a save in your first session, nothing is saved. Saving happens only if the save was found on boot. To start using a new save, reboot.

[dimkr]

11.0.161 ports the firewall from iptables to nftables. nftables can handle both IPv4 and IPv6 in one ruleset so everything is shorter and clearer (maybe faster, I don't know), while iptables is deprecated and also bigger on disk, making the decision to switch to nftables easy.

[d-pupp]

11.0.161 ports the firewall from iptables to nftables.

I just installed 11.0.161 and am figuring out nft. If I got it correct it starts the same way as iptables did. /etc/init.d/rc.firewall. There is one table inet filter and one chain firewall_ng policy drop.
Then there are rules for icmp, dhcp, lo, established, and Neighbour Discovery for ip6 (whatever that does). Nice and simple. I guess if I think about it that is all you need. If you install something with malware in it outbound rules won't help much. It's still going to phone home.
Nice.

[nnriyer]

I am unable to mount Vanilla Dpup 11.0.161 on easyos? Any other simple method other than click opiton.

[dimkr]

If you install something with malware in it outbound rules won't help much. It's still going to phone home.

Yep, previously the firewall had OUTPUT rules that only accept packets, basically anything. If it doesn't block any outgoing packets, having these rules is just a waste of CPU cycles. You can't detect 'phone home' packets in a firewall anyway, unless you have threat intelligence and something that blocks known malicious addresses (a constantly changing, inaccurate list).

I am unable to mount Vanilla Dpup 11.0.161 on easyos?

Use losetup with -P, it's a partitioned image.

[d-pupp]

@dimkr I have noticed rsync is not installed on dpup 11 builds. I occasionally do a mirror of my data files to a usb as a backup. Are there any plans to add rsync or something like it at some point?

[dimkr]

@d-pupp Right now - no. The plan is to keep it small and tidy, without extra packages that 1. don't add graphical applications 2. won't be used by most desktop users or during partitioning/recovery/installation 3. have dependencies that are not present 4. don't improve user experience (like optional but common fonts) or efficiency (like optional GPU acceleration drivers).

[dimkr]

11.0.165 will add:
1. A menu entry for the CUPS web interface
2. A yad-based tool that enables or disables daemons/init scripts (under the Setup menu)
3. A yad port of batinfo, so gxmessage can be dropped

[Clarity]

Like @d-pupp, I find value in rsync and grsync. But, if not included, it could be installed when a user discovers it missing. I think, though, some may think something is wrong if its not present as it is usually present in so many.

But, I do agree that anything added contributes to size as this applies to all things.

I respect developer's choice.

[Sofiya]

Such a cute OS system
Add a keyboard layout icon to the panel
When setting the language, Russian configures incorrectly, I had to configure it manually LANG=ru_RU.UTF-8

at first glance everything works properly ! minimalism This is cool For Debian separate +

[darksun]

Like @d-pupp, I find value in rsync and grsync. But, if not included, it could be installed when a user discovers it missing. I think, though, some may think something is wrong if its not present as it is usually present in so many.

But, I do agree that anything added contributes to size as this applies to all things.

I respect developer's choice.

maybe just rsyng without grsync could be a good compromise , but yes

Code: Select all

apt install rsync

is not that hard to type

Such a cute OS system
at first glance everything works properly ! minimalism This is cool For Debian separate +

@Sofiya yes it is a great OS. Hopefully debian trixie repository will include my most used software, newsboat, which is the main reason I still have not made it my main OS (so I can also help with reporting issues/bugs) so I am still using version 10.x which is absolutely brilliant too.

[dimkr]

@Sofiya It should work mostly fine (not all applications include Russian translations) if you reboot after the locale change

[Sofiya]

@Sofiya It should work mostly fine (not all applications include Russian translations) if you reboot after the locale change

Exactly, my mistake, I chose ru_RU, not ru_RU.UTF-8 . Sorry I was inattentive
Which translations are missing, I put them manually

[d-pupp]

@dimkr I want to start by saying I'm watching what is happening over there. Nasty stuff. I hope you and your family are safe and well.

As an unofficial tester of this OS I want to report the following
Xarchiver won't open deb files
yad in the terminal clutters it up with warnings

(yad:2043): dbind-WARNING **: 09:46:11.356: AT-SPI: Error retrieving accessibility bus address: org.freedesktop.DBus.Error.ServiceUnknown: The name org.a11y.Bus was not provided by any .service files

My printer install script stopped working. cups permissions seems to be the problem.
Works fine from the cups web interface after it prompts for a user name and password
Edit Scratch the printer install script stopped working. I t seems the version of the script I was using has a typo.
Good luck over there and keep up the good work
dpupp

[d-pupp]

I may have found an easy hack to stop this annoying message

(yad:2043): dbind-WARNING **: 09:46:11.356: AT-SPI: Error retrieving accessibility bus address: org.freedesktop.DBus.Error.ServiceUnknown: The name org.a11y.Bus was not provided by any .service files

A web search turned up hack that seems to work
I added to ~/.bashrc

Code: Select all

export NO_AT_BRIDGE=1

It seems to be working.

[dimkr]

Another addition to 11.0.165: a screen recorder. I use screen recorders a lot and this is something I've been missing in Puppy for a very long time. I added wf-recorder and wrote a simple yad-based wrapper that allows choice between recording the whole screen or a region, with a "Stop recording" button that floats at the bottom right corner of the screen. I think it's a very cool feature, something that's really nice to have out-of-the-box because it can help a lot with troubleshooting. wf-recorder is small, so size is not a concern.

[dimkr]

11.0.166 will unify the screenshot tool with the screen recording tool into a single tool that shows this overlay at the bottom of the screen:

This unified tool can be started from the menu (under Utility) or using keyboard shortcuts:

• PrtScn alone make it skip the first question and capture the entire screen

• Shift+PrtScn or Super+Shift+s make it skip the first question and capture a region

• In all other cases, it will ask if you want to select a region

• It always asks if you want an image or video capture, shows a file selection dialog for the output file and opens the output file at the end

I hope this will give a better user experience, one that's more similar to what you get with the screenshot tools of a DE but with a much lower footprint

[dimkr]

11.0.167 includes a small usability improvement on top of 11.0.166: yad is patched with https://github.com/step-/yad/pull/5 so the screenshot/screen capture overlay can be closed with the Esc key, and you can choose between the two offered options using the keyboard (arrows plus Enter) because this window now has keyboard focus.