EasyOS Scarthgap-series version 6.3.1

[bugnaw333]

It took only 3 minutes in my place for a delta upgrade.

[FeodorF]

Using a Raspberry Pi to write the easy-6.1-amd64.img file to a micro SD card. (This is a follow up of my post from page 8.)

This time I used the PiOS (64-bit) with Debian bookworm and Wayfire Wayland window manager for Raspberry Pi 4 and 5 platforms.
(Boy do I love Wayland!)

image-to-microSD.png (19.9 KiB) Viewed 2803 times

Remark:
PiOS (Wayland graphics + Bookworm) uses an old dd (coreutils) version 9.1, Copyright © 2022 Free Software Foundation Inc., but it is still good to use with Barry`s easyDD

[james2]

Signed in, wrote a piece of my trials and errors and happenings, it made me sign in again to send and the piece disappeared- didn't send.
Am happy with Easy, thanks to all involved.

[james2]

I always download full os and the delta , place in mnt/wgk and in releases file at times- Update software has never found it yet and proceeds to download full OS again. Doesn't worry me, at least i get Easy onboard. I can't frugal as yet to learn to config grub/ limine etc.

[Vverve]

Ok , not a new glitche to 6.1 ,sorry , a bit late , just to be sure it's not my tweaking the because i get weird funky things...still some french problem, having the completion(with my pet of 4.1,feature not available in 3.8) on just realised xvkbd get it right ,but output it wrong or blank it (dead key) ?!!!
Got it right with Kirkstone , what was the magic ? i dont know..or remember exactly , of what i does , i did the same .

ê_ok
à_ok
Ê_print À
À_print À
é_blank dead
cannot use compose(multi_key) too... never saw that problem with kirkstone !!
Choosing variant layout give just different blank or mismatch printing ,like é printing è..hmmm ...

Solving compose(multi_key) not working would be a helping one.

[alibadrelsayed]

Hi Barry, thanks for the good work, I got this error with qtemu, any suggestions?

[mimine]

hi Barry,
do you plan to do versions for AArch64 and also for RISC-V ?
(I dont have those hardwares but they are used on smartphones and will replace x86 soon anyway).
I dont know if my idea is usefull, but it is just an idea anyway.

[Federico]

@ Barry K
Dear Barry, I have noticed that for some reason Bluetooth isn't working on my hardware once again. I have tried to install the package firmware_linux_iwlwifi_6000_4-20200130 from PKGget, to no avail. BluePup says "power on command failed" and Bluetooth says "no standard controller available".

Screenshot(3).png (69.39 KiB) Viewed 2495 times

Screenshot(2).png (88.78 KiB) Viewed 2495 times

Screenshot(17).jpg (189.76 KiB) Viewed 2495 times

[bugnaw333]

@Federico
Please check if the driver is here:
/lib/firmware/rtl_bt

[Federico]

@Federico
Please check if the driver is here:
/lib/firmware/rtl_bt

These are the contents of my rtl_bt folder:

Screenshot(18).jpg (113.31 KiB) Viewed 2470 times

[Federico]

Alright, solved.

Screenshot(19).jpg (109.4 KiB) Viewed 2457 times

What I did is:

- uninstalled the package firmware_linux_iwlwifi_6000_4-20200130 from PKGget
- went here and downloaded the package firmware-iwlwifi_20240610-1_all.deb
- installed firmware-iwlwifi_20240610-1_all.deb, turned off the system saving the session, booted again and BT was working

Hope this is also helpful for others. But anyway, if I remember well, BT was working out of the box on my hardware on previous EasyOS versions. Am I right or am I remembering badly?
Another strange thing is that now the smartphone recognizes the PC no more with its hostname, but as "BlueZ 5.62".
Anyway, thank you.

[LarryDC]

First off: Thanks for the SASL aware libetpan needed for fastmail accounts in claws-mail. I haven´t tested it yet due to the following points:
- I read Barry K.'s suggested review of fastmail.fm and am therefore in the process of switching to StartMail as my normal email account - I already maintain a tuta.com account which works flawlessly for me on mu 1+7 Android phone.
- In updating to 6.1 I erred in adjusting my grub entry and had to revert back and update again. Fortunately I also got a better resolution on my 24" monitor as a bonus.
- This led me to try to remaster easyos to include my modifications, e.g., keepassxc, vfu, vivaldi, horizontal conky one liner at the top of the screen... After producing the new easy.sfs (That was the first time I'd ever seen all 4 processors working and the CPU at 100%!), I could not copy it to the image for lack of space on the 6.1 easyos.img. All I found in searching was a lot about ventoy which doesn't interest me in the slightest - I install my multiple distros on hard drive partitions. However Barry suggested using "truncate" to increase the size of the image, which I did. BUT i stiil got the same out of space error when I tried to copy over my 1,200MB easy.sfs So I must be missing something.
What must I do to get enough room on the easyos.img to remaster correctly?

[BarryK]

First off: Thanks for the SASL aware libetpan needed for fastmail accounts in claws-mail. I haven´t tested it yet due to the following points:
- I read Barry K.'s suggested review of fastmail.fm and am therefore in the process of switching to StartMail as my normal email account - I already maintain a tuta.com account which works flawlessly for me on mu 1+7 Android phone.
- In updating to 6.1 I erred in adjusting my grub entry and had to revert back and update again. Fortunately I also got a better resolution on my 24" monitor as a bonus.
- This led me to try to remaster easyos to include my modifications, e.g., keepassxc, vfu, vivaldi, horizontal conky one liner at the top of the screen... After producing the new easy.sfs (That was the first time I'd ever seen all 4 processors working and the CPU at 100%!), I could not copy it to the image for lack of space on the 6.1 easyos.img. All I found in searching was a lot about ventoy which doesn't interest me in the slightest - I install my multiple distros on hard drive partitions. However Barry suggested using "truncate" to increase the size of the image, which I did. BUT i stiil got the same out of space error when I tried to copy over my 1,200MB easy.sfs So I must be missing something.
What must I do to get enough room on the easyos.img to remaster correctly?

truncate can be used to increase the size of the .img file; however, the ext4 filesystem has not been increased. It needs to be increased to fill the new available space.

But there is a problem with doing that, as then the working-partition and ext4 won't get increased at first bootup in a usb stick to fill the entire size of the usb-stick.

The way to go, if you want to create a usb flash stick, is to write the original .img file to the flash drive.
Then resize the working-partition to fill the drive. Then resize ext4 working-partition to fill the working-partition.

You can do both of those with Gparted.

Then afterward, make sure ext4 has the "encrypt" feature (for example of flash drive being /dev/sdb):

Code: Select all

tune2fs -O encrypt /dev/sdb2

[Federico]

Does anyone know if there's a way to let the integrated microphone work? It looks like mine is not detected / supported by the driver. If I open the alsa mixer and press the F4 key I get:

Screenshot(22).jpg (32.26 KiB) Viewed 2262 times

my integrated soundcard is detected as:

Screenshot(21).jpg (65.19 KiB) Viewed 2262 times

my hardware:

Screenshot(17).jpg (189.76 KiB) Viewed 2262 times

It would be very nice, because one could also run video conferencing software on Easy. The automatic detection works quite well, since I can also connect my laptop to an external TV and watch video and audio on it. But for some reason the integrated mic doesn't.

Thanks in advance

[Caramel]

Does anyone know if there's a way to let the integrated microphone work? It looks like mine is not detected / supported by the driver. If I open the alsa mixer and press the F4 key I get:

Have you try pavucontrol ?
https://forums.linuxmint.com/viewtopic.php?t=291362

[Federico]

Does anyone know if there's a way to let the integrated microphone work? It looks like mine is not detected / supported by the driver. If I open the alsa mixer and press the F4 key I get:

Have you try pavucontrol ?
https://forums.linuxmint.com/viewtopic.php?t=291362

Pavucontrol is the standard EasyOS app for configuring sound. It is obviously already installed. It is already set in Analog Stereo Duplex mode:

Screenshot(25).jpg (35.52 KiB) Viewed 2244 times

Strangely enough, if I press the key for configuring the sound card within Pavucontrol I get no recording device (as shown on my previous post). But if I run Alsamixer independently from the menu, if I press the F4 key I get this instead:

Screenshot(26).jpg (32.2 KiB) Viewed 2244 times

But it looks like it doesn't matter: the mic does not work and nothing is recorded. I have tested it with arecord (foo.wav contains only perfect silence):

Code: Select all

# arecord -vv -fdat foo.wav
ALSA <-> PulseAudio PCM I/O Plugin
Its setup is:
  stream       : CAPTURE
  access       : RW_INTERLEAVED
  format       : S16_LE
  subformat    : STD
  channels     : 2
  rate         : 48000
  exact rate   : 48000 (48000/1)
  msbits       : 16
  buffer_size  : 24000
  period_size  : 6000
  period_time  : 125000
  tstamp_mode  : ENABLE
  tstamp_type  : GETTIMEOFDAY
  period_step  : 1
  avail_min    : 6000
  period_event : 0
  start_threshold  : 1
  stop_threshold   : 24000
  silence_threshold: 0
  silence_size : 0
  boundary     : 6755399441055744000
Aufnahme: WAVE 'foo.wav' : Signed 16 bit Little Endian, Rate: 48000 Hz, stereo
#+                                                 | 00%
Abbruch durch Signal Interrupt ...
# 

[Federico]

Basically, on Alsamixer I can select 2 soundcards by pressing the F6 key:

Screenshot(27).jpg (39.56 KiB) Viewed 2236 times

If I select standard, when pressing the F4 key I get:

Screenshot(26).jpg (32.2 KiB) Viewed 2236 times

If I select default:0 HDA Intel PCH, when pressing the F4 key I get:

Screenshot(22).jpg (32.26 KiB) Viewed 2236 times

[Caramel]

Maybe alsa-info .sh could give informations.

In my PC alsa-info.sh seemed to freeze, Actually it was slow and offered to update itself.

[Federico]

Thank you. I think that the only way would be to install the Intel hda driver (kernel module snd_hda_intel), but there doesn't seem to exist a Linux audio driver for Intel Tiger Lake, since if you search for firmware-intel-sound on packages.debian.org you will see that among all versions (buster, bullseye, bookworm, trixie, sid) none of them supports the Tiger Lake architecture. Anyway, the output of the script follows:

Code: Select all

upload=true&script=true&cardinfo=
!!################################
!!ALSA Information Script v 0.5.3
!!################################

!!Script ran on: Thu Jul 18 18:10:01 UTC 2024


!!Linux Distribution
!!------------------

EasyOS Scarthgap64 Linux Linux 6.6.39 [x86_64 arch] DISTRIB_CODENAME=scarthgap64 DISTRIB_DESCRIPTION="EasyOS Scarthgap64" UC_CURR_VER='126.0.6478.114-1' UC_DL_VER='126.0.6478.114-1'


!!DMI Information
!!---------------

Manufacturer:      ASUSTeK COMPUTER INC.
Product Name:      ZenBook UX325EA_UX325EA
Product Version:   1.0
Firmware Version:  UX325EA.320
System SKU:        
Board Vendor:      ASUSTeK COMPUTER INC.
Board Name:        UX325EA


!!ACPI Device Status Information
!!---------------

/sys/bus/acpi/devices/ACPI0003:00/status 	 31
/sys/bus/acpi/devices/ACPI000C:00/status 	 15
/sys/bus/acpi/devices/ACPI000E:00/status 	 15
/sys/bus/acpi/devices/ASUS2018:00/status 	 15
/sys/bus/acpi/devices/INT33A1:00/status 	 15
/sys/bus/acpi/devices/INT340E:00/status 	 15
/sys/bus/acpi/devices/INT34C5:00/status 	 15
/sys/bus/acpi/devices/INT3F0D:00/status 	 15
/sys/bus/acpi/devices/INTC1040:00/status 	 15
/sys/bus/acpi/devices/INTC1043:00/status 	 15
/sys/bus/acpi/devices/INTC1043:01/status 	 15
/sys/bus/acpi/devices/INTC1043:02/status 	 15
/sys/bus/acpi/devices/INTC1043:03/status 	 15
/sys/bus/acpi/devices/INTC1043:04/status 	 15
/sys/bus/acpi/devices/LNXPOWER:01/status 	 1
/sys/bus/acpi/devices/LNXPOWER:02/status 	 1
/sys/bus/acpi/devices/LNXPOWER:03/status 	 1
/sys/bus/acpi/devices/LNXPOWER:04/status 	 1
/sys/bus/acpi/devices/LNXPOWER:05/status 	 1
/sys/bus/acpi/devices/LNXPOWER:06/status 	 1
/sys/bus/acpi/devices/LNXPOWER:07/status 	 1
/sys/bus/acpi/devices/MSFT0001:00/status 	 15
/sys/bus/acpi/devices/MSFT0101:00/status 	 15
/sys/bus/acpi/devices/PNP0103:00/status 	 15
/sys/bus/acpi/devices/PNP0C02:02/status 	 3
/sys/bus/acpi/devices/PNP0C02:04/status 	 11
/sys/bus/acpi/devices/PNP0C09:00/status 	 15
/sys/bus/acpi/devices/PNP0C0A:00/status 	 31
/sys/bus/acpi/devices/PNP0C0C:00/status 	 15
/sys/bus/acpi/devices/PNP0C0D:00/status 	 15
/sys/bus/acpi/devices/PNP0C0F:00/status 	 9
/sys/bus/acpi/devices/PNP0C0F:01/status 	 9
/sys/bus/acpi/devices/PNP0C0F:02/status 	 9
/sys/bus/acpi/devices/PNP0C0F:03/status 	 9
/sys/bus/acpi/devices/PNP0C0F:04/status 	 9
/sys/bus/acpi/devices/PNP0C0F:05/status 	 9
/sys/bus/acpi/devices/PNP0C0F:06/status 	 9
/sys/bus/acpi/devices/PNP0C0F:07/status 	 9
/sys/bus/acpi/devices/PRP00001:00/status 	 11
/sys/bus/acpi/devices/PRP00001:01/status 	 11
/sys/bus/acpi/devices/USBC000:00/status 	 15
/sys/bus/acpi/devices/device:06/status 	 15
/sys/bus/acpi/devices/device:4a/status 	 15
/sys/bus/acpi/devices/device:56/status 	 15
/sys/bus/acpi/devices/device:57/status 	 15
/sys/bus/acpi/devices/device:96/status 	 15
/sys/bus/acpi/devices/device:97/status 	 15
/sys/bus/acpi/devices/device:98/status 	 15
/sys/bus/acpi/devices/device:9a/status 	 15
/sys/bus/acpi/devices/device:9b/status 	 15
/sys/bus/acpi/devices/device:9c/status 	 15
/sys/bus/acpi/devices/device:cc/status 	 15
/sys/bus/acpi/devices/device:d3/status 	 15
/sys/bus/acpi/devices/device:d4/status 	 15
/sys/bus/acpi/devices/device:d5/status 	 15
/sys/bus/acpi/devices/device:d9/status 	 15


!!ACPI SoundWire Device Status Information
!!---------------

Realtek 0x000010025d070100
Realtek 0x000110025d070100
Realtek 0x000210025d070100
Realtek 0x000310025d070100
Realtek 0x000010025d070000
Realtek 0x000110025d070000
Realtek 0x000210025d070000
Realtek 0x000310025d070000


!!Kernel Information
!!------------------

Kernel release:    #1 SMP Fri Jul 12 02:19:23 AWST 2024
Operating System:  GNU/Linux
Architecture:      x86_64
Processor:         unknown
SMP Enabled:       Yes


!!ALSA Version
!!------------

Driver version:     k6.6.39
Library version:    
Utilities version:  1.2.11


!!Loaded ALSA modules
!!-------------------

snd_hda_intel (card 0)


!!Sound Servers on this system
!!----------------------------

Pulseaudio:
      Installed - Yes (/usr/bin/pulseaudio)
      Running - Yes

Jack:
      Installed - Yes (/usr/bin/jackd)
      Running - No


!!Soundcards recognised by ALSA
!!-----------------------------

 0 [PCH            ]: HDA-Intel - HDA Intel PCH
                      HDA Intel PCH at 0x603f2c0000 irq 170


!!PCI Soundcards installed in the system
!!--------------------------------------

0000:00:1f.3 Multimedia audio controller [0401]: Intel Corporation Tiger Lake-LP Smart Sound Technology Audio Controller [8086:a0c8] (rev 20)
	DeviceName: Onboard - Sound


!!Modprobe options (Sound related)
!!--------------------------------

snd_atiixp_modem: index=-2
snd_intel8x0m: index=-2
snd_via82xx_modem: index=-2
snd_usb_audio: index=-2
snd_usb_caiaq: index=-2
snd_usb_ua101: index=-2
snd_usb_us122l: index=-2
snd_usb_usx2y: index=-2
snd_cmipci: mpu_port=0x330 fm_port=0x388
snd_pcsp: index=-2
snd_usb_audio: index=-2


!!Loaded sound module options
!!---------------------------

!!Module: snd_hda_intel
	align_buffer_size : -1
	bdl_pos_adj : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
	beep_mode : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
	ctl_dev_id : N
	dmic_detect : Y
	enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
	enable_msi : -1
	id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
	index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
	jackpoll_ms : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
	model : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
	patch : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
	pm_blacklist : Y
	position_fix : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
	power_save : 0
	power_save_controller : Y
	probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
	probe_only : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
	single_cmd : -1
	snoop : -1


!!Sysfs card info
!!---------------

!!Card: /sys/class/sound/card0
Driver: /sys/bus/pci/drivers/snd_hda_intel
Tree:
	/sys/class/sound/card0
	|-- controlC0
	|   |-- dev
	|   |-- device -> ../../card0
	|   |-- power
	|   |-- subsystem -> ../../../../../../class/sound
	|   `-- uevent
	|-- device -> ../../../0000:00:1f.3
	|-- hwC0D0
	|   |-- afg
	|   |-- chip_name
	|   |-- clear
	|   |-- dev
	|   |-- device -> ../../card0
	|   |-- driver_pin_configs
	|   |-- hints
	|   |-- init_pin_configs
	|   |-- init_verbs
	|   |-- mfg
	|   |-- modelname
	|   |-- power
	|   |-- power_off_acct
	|   |-- power_on_acct
	|   |-- reconfig
	|   |-- revision_id
	|   |-- subsystem -> ../../../../../../class/sound
	|   |-- subsystem_id
	|   |-- uevent
	|   |-- user_pin_configs
	|   |-- vendor_id
	|   `-- vendor_name
	|-- hwC0D2
	|   |-- afg
	|   |-- chip_name
	|   |-- clear
	|   |-- dev
	|   |-- device -> ../../card0
	|   |-- driver_pin_configs
	|   |-- hints
	|   |-- init_pin_configs
	|   |-- init_verbs
	|   |-- mfg
	|   |-- modelname
	|   |-- power
	|   |-- power_off_acct
	|   |-- power_on_acct
	|   |-- reconfig
	|   |-- revision_id
	|   |-- subsystem -> ../../../../../../class/sound
	|   |-- subsystem_id
	|   |-- uevent
	|   |-- user_pin_configs
	|   |-- vendor_id
	|   `-- vendor_name
	|-- id
	|-- input10
	|   |-- capabilities
	|   |-- device -> ../../card0
	|   |-- event10
	|   |-- id
	|   |-- inhibited
	|   |-- modalias
	|   |-- name
	|   |-- phys
	|   |-- power
	|   |-- properties
	|   |-- subsystem -> ../../../../../../class/input
	|   |-- uevent
	|   `-- uniq
	|-- input11
	|   |-- capabilities
	|   |-- device -> ../../card0
	|   |-- event11
	|   |-- id
	|   |-- inhibited
	|   |-- modalias
	|   |-- name
	|   |-- phys
	|   |-- power
	|   |-- properties
	|   |-- subsystem -> ../../../../../../class/input
	|   |-- uevent
	|   `-- uniq
	|-- input12
	|   |-- capabilities
	|   |-- device -> ../../card0
	|   |-- event12
	|   |-- id
	|   |-- inhibited
	|   |-- modalias
	|   |-- name
	|   |-- phys
	|   |-- power
	|   |-- properties
	|   |-- subsystem -> ../../../../../../class/input
	|   |-- uevent
	|   `-- uniq
	|-- input9
	|   |-- capabilities
	|   |-- device -> ../../card0
	|   |-- event9
	|   |-- id
	|   |-- inhibited
	|   |-- modalias
	|   |-- name
	|   |-- phys
	|   |-- power
	|   |-- properties
	|   |-- subsystem -> ../../../../../../class/input
	|   |-- uevent
	|   `-- uniq
	|-- number
	|-- pcmC0D0c
	|   |-- dev
	|   |-- device -> ../../card0
	|   |-- pcm_class
	|   |-- power
	|   |-- subsystem -> ../../../../../../class/sound
	|   `-- uevent
	|-- pcmC0D0p
	|   |-- dev
	|   |-- device -> ../../card0
	|   |-- pcm_class
	|   |-- power
	|   |-- subsystem -> ../../../../../../class/sound
	|   `-- uevent
	|-- pcmC0D2c
	|   |-- dev
	|   |-- device -> ../../card0
	|   |-- pcm_class
	|   |-- power
	|   |-- subsystem -> ../../../../../../class/sound
	|   `-- uevent
	|-- pcmC0D3p
	|   |-- dev
	|   |-- device -> ../../card0
	|   |-- pcm_class
	|   |-- power
	|   |-- subsystem -> ../../../../../../class/sound
	|   `-- uevent
	|-- pcmC0D7p
	|   |-- dev
	|   |-- device -> ../../card0
	|   |-- pcm_class
	|   |-- power
	|   |-- subsystem -> ../../../../../../class/sound
	|   `-- uevent
	|-- pcmC0D8p
	|   |-- dev
	|   |-- device -> ../../card0
	|   |-- pcm_class
	|   |-- power
	|   |-- subsystem -> ../../../../../../class/sound
	|   `-- uevent
	|-- pcmC0D9p
	|   |-- dev
	|   |-- device -> ../../card0
	|   |-- pcm_class
	|   |-- power
	|   |-- subsystem -> ../../../../../../class/sound
	|   `-- uevent
	|-- power
	|   |-- autosuspend_delay_ms
	|   |-- control
	|   |-- runtime_active_time
	|   |-- runtime_status
	|   `-- runtime_suspended_time
	|-- subsystem -> ../../../../../class/sound
	`-- uevent


!!HDA-Intel Codec information
!!---------------------------
--startcollapse--

Codec: Realtek ALC294
Address: 0
AFG Function Id: 0x1 (unsol 1)
Vendor Id: 0x10ec0294
Subsystem Id: 0x10431452
Revision Id: 0x100004
No Modem Function Group found
Default PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
State of AFG node 0x01:
  Power states:  D0 D1 D2 D3 D3cold CLKSTOP EPSS
  Power: setting=D0, actual=D0
GPIO: io=4, o=0, i=0, unsolicited=1, wake=0
  IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
  IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
  IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
  IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Node 0x02 [Audio Output] wcaps 0x41d: Stereo Amp-Out
  Control: name="Master Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Device: name="ALC294 Analog", type="Audio", device=0
  Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0
  Amp-Out vals:  [0x45 0x45]
  Converter: stream=1, channel=0
  PCM:
    rates [0x60]: 44100 48000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x03 [Audio Output] wcaps 0x41d: Stereo Amp-Out
  Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0
  Amp-Out vals:  [0x57 0x57]
  Converter: stream=0, channel=0
  PCM:
    rates [0x60]: 44100 48000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x04 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x05 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x06 [Audio Output] wcaps 0x411: Stereo
  Converter: stream=0, channel=0
  PCM:
    rates [0x40]: 48000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x07 [Audio Input] wcaps 0x10051b: Stereo Amp-In
  Device: name="ALC294 Analog", type="Audio", device=0
  Amp-In caps: ofs=0x17, nsteps=0x3f, stepsize=0x02, mute=1
  Amp-In vals:  [0x97 0x97]
  Converter: stream=1, channel=0
  SDI-Select: 0
  PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 1
     0x24
Node 0x08 [Audio Input] wcaps 0x10051b: Stereo Amp-In
  Device: name="ALC294 Alt Analog", type="Audio", device=2
  Amp-In caps: ofs=0x17, nsteps=0x3f, stepsize=0x02, mute=1
  Amp-In vals:  [0x97 0x97]
  Converter: stream=0, channel=0
  SDI-Select: 0
  PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 1
     0x23
Node 0x09 [Audio Input] wcaps 0x10051b: Stereo Amp-In
  Amp-In caps: ofs=0x17, nsteps=0x3f, stepsize=0x02, mute=1
  Amp-In vals:  [0x97 0x97]
  Converter: stream=0, channel=0
  SDI-Select: 0
  PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 1
     0x22
Node 0x0a [Audio Input] wcaps 0x100711: Stereo Digital
  Converter: stream=0, channel=0
  SDI-Select: 0
  Digital:
  Digital category: 0x0
  IEC Coding Type: 0x0
  PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 1
     0x1f
Node 0x0b [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0c [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0d [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0e [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0f [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x10 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x11 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x12 [Pin Complex] wcaps 0x40040b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00]
  Pincap 0x00000020: IN
  Pin Default 0x40000000: [N/A] Line Out at Ext N/A
    Conn = Unknown, Color = Unknown
    DefAssociation = 0x0, Sequence = 0x0
  Pin-ctls: 0x00:
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x13 [Pin Complex] wcaps 0x40040b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00]
  Pincap 0x00000020: IN
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x00:
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x14 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x00010010: OUT EAPD
  EAPD 0x2: EAPD
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x00:
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 1
     0x02
Node 0x15 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x0001001c: OUT HP EAPD Detect
  EAPD 0x2: EAPD
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x00:
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 3
     0x02* 0x03 0x06
Node 0x16 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x00010014: OUT EAPD Detect
  EAPD 0x2: EAPD
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x00:
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 2
     0x02* 0x03
Node 0x17 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
  Control: name="Master Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x00 0x00]
  Pincap 0x0001001c: OUT HP EAPD Detect
  EAPD 0x2: EAPD
  Pin Default 0x90170110: [Fixed] Speaker at Int N/A
    Conn = Analog, Color = Unknown
    DefAssociation = 0x1, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x40: OUT
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 3
     0x02* 0x03 0x06
Node 0x18 [Pin Complex] wcaps 0x400481: Stereo
  Pincap 0x00000024: IN Detect
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x00:
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x19 [Pin Complex] wcaps 0x40048b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00]
  Pincap 0x00003724: IN Detect
    Vref caps: HIZ 50 GRD 80 100
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x20: IN VREF_HIZ
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x1a [Pin Complex] wcaps 0x40048b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00]
  Pincap 0x00003724: IN Detect
    Vref caps: HIZ 50 GRD 80 100
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x00: VREF_HIZ
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x1b [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00]
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x00013734: IN OUT EAPD Detect
    Vref caps: HIZ 50 GRD 80 100
  EAPD 0x2: EAPD
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x20: IN VREF_HIZ
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 2
     0x02* 0x03
Node 0x1c [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x1d [Pin Complex] wcaps 0x400400: Mono
  Pincap 0x00000020: IN
  Pin Default 0x4043002d: [N/A] SPDIF Out at Ext N/A
    Conn = ATAPI, Color = Unknown
    DefAssociation = 0x2, Sequence = 0xd
  Pin-ctls: 0x20: IN
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x1e [Pin Complex] wcaps 0x400581: Stereo
  Pincap 0x00000014: OUT Detect
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x40: OUT
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 1
     0x06
Node 0x1f [Pin Complex] wcaps 0x400681: Stereo Digital
  Pincap 0x00000024: IN Detect
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x20: IN
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono
  Processing caps: benign=0, ncoeff=130
Node 0x21 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x0001001c: OUT HP EAPD Detect
  EAPD 0x2: EAPD
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x00:
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 2
     0x02 0x03*
Node 0x22 [Audio Selector] wcaps 0x300101: Stereo
  Connection: 4
     0x19* 0x1a 0x1b 0x12
Node 0x23 [Audio Selector] wcaps 0x300101: Stereo
  Connection: 4
     0x19* 0x1a 0x1b 0x13
Node 0x24 [Audio Selector] wcaps 0x300101: Stereo
  Connection: 3
     0x12* 0x13 0x18
Node 0x25 [Vendor Defined Widget] wcaps 0xf00000: Mono
Codec: Intel Tigerlake HDMI
Address: 2
AFG Function Id: 0x1 (unsol 0)
Vendor Id: 0x80862812
Subsystem Id: 0x80860101
Revision Id: 0x100000
No Modem Function Group found
Default PCM:
    rates [0x0]:
    bits [0x0]:
    formats [0x0]:
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
State of AFG node 0x01:
  Power states:  D0 D3 CLKSTOP EPSS
  Power: setting=D0, actual=D0, Clock-stop-OK
GPIO: io=0, o=0, i=0, unsolicited=0, wake=0
Node 0x03 [Audio Output] wcaps 0x6611: 8-Channels Digital
  Converter: stream=0, channel=0
  Digital: Enabled KAE
  Digital category: 0x0
  IEC Coding Type: 0x0
  PCM:
    rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
    bits [0x1a]: 16 24 32
    formats [0x5]: PCM AC3
  Power states:  D0 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x04 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x00 0x00]
  Pincap 0x0b000094: OUT Detect HBR HDMI DP
  Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
    Conn = Digital, Color = Unknown
    DefAssociation = 0x1, Sequence = 0x0
  Pin-ctls: 0x00:
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D3 EPSS
  Power: setting=D0, actual=D0
  Devices: 0
  Connection: 0
Node 0x05 [Audio Output] wcaps 0x6611: 8-Channels Digital
  Converter: stream=0, channel=0
  Digital: Enabled KAE
  Digital category: 0x0
  IEC Coding Type: 0x0
  PCM:
    rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
    bits [0x1a]: 16 24 32
    formats [0x5]: PCM AC3
  Power states:  D0 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x06 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x00 0x00]
  Pincap 0x0b000094: OUT Detect HBR HDMI DP
  Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
    Conn = Digital, Color = Unknown
    DefAssociation = 0x1, Sequence = 0x0
  Pin-ctls: 0x00:
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D3 EPSS
  Power: setting=D0, actual=D0
  Devices: 0
  Connection: 0
Node 0x07 [Audio Output] wcaps 0x6611: 8-Channels Digital
  Converter: stream=0, channel=0
  Digital: Enabled KAE
  Digital category: 0x0
  IEC Coding Type: 0x0
  PCM:
    rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
    bits [0x1a]: 16 24 32
    formats [0x5]: PCM AC3
  Power states:  D0 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x08 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x00 0x00]
  Pincap 0x0b000094: OUT Detect HBR HDMI DP
  Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
    Conn = Digital, Color = Unknown
    DefAssociation = 0x1, Sequence = 0x0
  Pin-ctls: 0x00:
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D3 EPSS
  Power: setting=D0, actual=D0
  Devices: 0
  Connection: 0
Node 0x09 [Audio Output] wcaps 0x6611: 8-Channels Digital
  Converter: stream=0, channel=0
  Digital: Enabled KAE
  Digital category: 0x0
  IEC Coding Type: 0x0
  PCM:
    rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
    bits [0x1a]: 16 24 32
    formats [0x5]: PCM AC3
  Power states:  D0 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x0a [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x00 0x00]
  Pincap 0x0b000094: OUT Detect HBR HDMI DP
  Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
    Conn = Digital, Color = Unknown
    DefAssociation = 0x1, Sequence = 0x0
  Pin-ctls: 0x00:
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D3 EPSS
  Power: setting=D0, actual=D0
  Devices: 0
  Connection: 0
Node 0x0b [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x00 0x00]
  Pincap 0x0b000094: OUT Detect HBR HDMI DP
  Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
    Conn = Digital, Color = Unknown
    DefAssociation = 0x1, Sequence = 0x0
  Pin-ctls: 0x00:
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D3 EPSS
  Power: setting=D0, actual=D0
  Devices: 0
  Connection: 0
Node 0x0c [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x00 0x00]
  Pincap 0x0b000094: OUT Detect HBR HDMI DP
  Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
    Conn = Digital, Color = Unknown
    DefAssociation = 0x1, Sequence = 0x0
  Pin-ctls: 0x00:
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D3 EPSS
  Power: setting=D0, actual=D0
  Devices: 0
  Connection: 0
Node 0x0d [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x00 0x00]
  Pincap 0x0b000094: OUT Detect HBR HDMI DP
  Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
    Conn = Digital, Color = Unknown
    DefAssociation = 0x1, Sequence = 0x0
  Pin-ctls: 0x00:
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D3 EPSS
  Power: setting=D0, actual=D0
  Devices: 0
  Connection: 0
Node 0x0e [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x00 0x00]
  Pincap 0x0b000094: OUT Detect HBR HDMI DP
  Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
    Conn = Digital, Color = Unknown
    DefAssociation = 0x1, Sequence = 0x0
  Pin-ctls: 0x00:
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D3 EPSS
  Power: setting=D0, actual=D0
  Devices: 0
  Connection: 0
Node 0x0f [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x00 0x00]
  Pincap 0x0b000094: OUT Detect HBR HDMI DP
  Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
    Conn = Digital, Color = Unknown
    DefAssociation = 0x1, Sequence = 0x0
  Pin-ctls: 0x00:
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D3 EPSS
  Power: setting=D0, actual=D0
  Devices: 0
  Connection: 0
--endcollapse--


!!ALSA Device nodes
!!-----------------

crw-rw---- 1 root audio 116, 11 Jul 18 17:19 /dev/snd/controlC0
crw-rw---- 1 root audio 116,  9 Jul 18 17:19 /dev/snd/hwC0D0
crw-rw---- 1 root audio 116, 10 Jul 18 17:19 /dev/snd/hwC0D2
crw-rw---- 1 root audio 116,  3 Jul 18 17:31 /dev/snd/pcmC0D0c
crw-rw---- 1 root audio 116,  2 Jul 18 18:42 /dev/snd/pcmC0D0p
crw-rw---- 1 root audio 116,  4 Jul 18 17:19 /dev/snd/pcmC0D2c
crw-rw---- 1 root audio 116,  5 Jul 18 17:19 /dev/snd/pcmC0D3p
crw-rw---- 1 root audio 116,  6 Jul 18 17:19 /dev/snd/pcmC0D7p
crw-rw---- 1 root audio 116,  7 Jul 18 17:19 /dev/snd/pcmC0D8p
crw-rw---- 1 root audio 116,  8 Jul 18 17:19 /dev/snd/pcmC0D9p
crw-rw---- 1 root audio 116,  1 Jul 17 20:19 /dev/snd/seq
crw-rw---- 1 root audio 116, 33 Jul 17 20:19 /dev/snd/timer

/dev/snd/by-path:
total 0
drwxr-xr-x 2 root root  60 Jul 18 17:19 .
drwxr-xr-x 3 root root 300 Jul 18 17:19 ..
lrwxrwxrwx 1 root root  12 Jul 18 17:19 pci-0000:00:1f.3 -> ../controlC0


!!ALSA configuration files
!!------------------------

!!System wide config file (/etc/asound.conf)

#SND_HW_PROFILE=''


!!Aplay/Arecord output
!!--------------------

APLAY

**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC294 Analog [ALC294 Analog]
  Subdevices: 0/1
  Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 7: HDMI 1 [HDMI 1]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 8: HDMI 2 [HDMI 2]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 9: HDMI 3 [HDMI 3]
  Subdevices: 1/1
  Subdevice #0: subdevice #0

ARECORD

**** List of CAPTURE Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC294 Analog [ALC294 Analog]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 2: ALC294 Alt Analog [ALC294 Alt Analog]
  Subdevices: 2/2
  Subdevice #0: subdevice #0
  Subdevice #1: subdevice #1

!!Amixer output
!!-------------

!!-------Mixer controls for card PCH

Card sysdefault:0 'PCH'/'HDA Intel PCH at 0x603f2c0000 irq 170'
  Mixer name	: 'Realtek ALC294'
  Components	: 'HDA:10ec0294,10431452,00100004 HDA:80862812,80860101,00100000'
  Controls      : 36
  Simple ctrls  : 6
Simple mixer control 'Master',0
  Capabilities: pvolume pswitch
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 87
  Mono:
  Front Left: Playback 69 [79%] [-13.50dB] [on]
  Front Right: Playback 69 [79%] [-13.50dB] [on]
Simple mixer control 'PCM',0
  Capabilities: pvolume
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 255
  Mono:
  Front Left: Playback 255 [100%] [0.00dB]
  Front Right: Playback 255 [100%] [0.00dB]
Simple mixer control 'IEC958',0
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [off]
Simple mixer control 'IEC958',1
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [on]
Simple mixer control 'IEC958',2
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [on]
Simple mixer control 'IEC958',3
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [on]


!!Alsactl output
!!--------------

--startcollapse--
state.PCH {
	control.1 {
		iface MIXER
		name 'Master Playback Volume'
		value.0 69
		value.1 69
		comment {
			access 'read write'
			type INTEGER
			count 2
			range '0 - 87'
			dbmin -6525
			dbmax 0
			dbvalue.0 -1350
			dbvalue.1 -1350
		}
	}
	control.2 {
		iface MIXER
		name 'Master Playback Switch'
		value.0 true
		value.1 true
		comment {
			access 'read write'
			type BOOLEAN
			count 2
		}
	}
	control.3 {
		iface CARD
		name 'Speaker Phantom Jack'
		value true
		comment {
			access read
			type BOOLEAN
			count 1
		}
	}
	control.4 {
		iface PCM
		name 'Playback Channel Map'
		value.0 3
		value.1 4
		comment {
			access read
			type INTEGER
			count 2
			range '0 - 36'
		}
	}
	control.5 {
		iface PCM
		name 'Capture Channel Map'
		value.0 0
		value.1 0
		comment {
			access read
			type INTEGER
			count 2
			range '0 - 36'
		}
	}
	control.6 {
		iface PCM
		device 2
		name 'Capture Channel Map'
		value.0 0
		value.1 0
		comment {
			access read
			type INTEGER
			count 2
			range '0 - 36'
		}
	}
	control.7 {
		iface PCM
		device 2
		name 'Capture Channel Map'
		index 1
		value.0 0
		value.1 0
		comment {
			access read
			type INTEGER
			count 2
			range '0 - 36'
		}
	}
	control.8 {
		iface CARD
		name 'HDMI/DP,pcm=3 Jack'
		value false
		comment {
			access read
			type BOOLEAN
			count 1
		}
	}
	control.9 {
		iface MIXER
		name 'IEC958 Playback Con Mask'
		value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
		comment {
			access read
			type IEC958
			count 1
		}
	}
	control.10 {
		iface MIXER
		name 'IEC958 Playback Pro Mask'
		value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
		comment {
			access read
			type IEC958
			count 1
		}
	}
	control.11 {
		iface MIXER
		name 'IEC958 Playback Default'
		value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
		comment {
			access 'read write'
			type IEC958
			count 1
		}
	}
	control.12 {
		iface MIXER
		name 'IEC958 Playback Switch'
		value false
		comment {
			access 'read write'
			type BOOLEAN
			count 1
		}
	}
	control.13 {
		iface PCM
		device 3
		name ELD
		value ''
		comment {
			access 'read volatile'
			type BYTES
			count 0
		}
	}
	control.14 {
		iface CARD
		name 'HDMI/DP,pcm=7 Jack'
		value false
		comment {
			access read
			type BOOLEAN
			count 1
		}
	}
	control.15 {
		iface MIXER
		name 'IEC958 Playback Con Mask'
		index 1
		value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
		comment {
			access read
			type IEC958
			count 1
		}
	}
	control.16 {
		iface MIXER
		name 'IEC958 Playback Pro Mask'
		index 1
		value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
		comment {
			access read
			type IEC958
			count 1
		}
	}
	control.17 {
		iface MIXER
		name 'IEC958 Playback Default'
		index 1
		value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
		comment {
			access 'read write'
			type IEC958
			count 1
		}
	}
	control.18 {
		iface MIXER
		name 'IEC958 Playback Switch'
		index 1
		value true
		comment {
			access 'read write'
			type BOOLEAN
			count 1
		}
	}
	control.19 {
		iface PCM
		device 7
		name ELD
		value ''
		comment {
			access 'read volatile'
			type BYTES
			count 0
		}
	}
	control.20 {
		iface CARD
		name 'HDMI/DP,pcm=8 Jack'
		value false
		comment {
			access read
			type BOOLEAN
			count 1
		}
	}
	control.21 {
		iface MIXER
		name 'IEC958 Playback Con Mask'
		index 2
		value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
		comment {
			access read
			type IEC958
			count 1
		}
	}
	control.22 {
		iface MIXER
		name 'IEC958 Playback Pro Mask'
		index 2
		value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
		comment {
			access read
			type IEC958
			count 1
		}
	}
	control.23 {
		iface MIXER
		name 'IEC958 Playback Default'
		index 2
		value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
		comment {
			access 'read write'
			type IEC958
			count 1
		}
	}
	control.24 {
		iface MIXER
		name 'IEC958 Playback Switch'
		index 2
		value true
		comment {
			access 'read write'
			type BOOLEAN
			count 1
		}
	}
	control.25 {
		iface PCM
		device 8
		name ELD
		value ''
		comment {
			access 'read volatile'
			type BYTES
			count 0
		}
	}
	control.26 {
		iface CARD
		name 'HDMI/DP,pcm=9 Jack'
		value false
		comment {
			access read
			type BOOLEAN
			count 1
		}
	}
	control.27 {
		iface MIXER
		name 'IEC958 Playback Con Mask'
		index 3
		value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
		comment {
			access read
			type IEC958
			count 1
		}
	}
	control.28 {
		iface MIXER
		name 'IEC958 Playback Pro Mask'
		index 3
		value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
		comment {
			access read
			type IEC958
			count 1
		}
	}
	control.29 {
		iface MIXER
		name 'IEC958 Playback Default'
		index 3
		value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
		comment {
			access 'read write'
			type IEC958
			count 1
		}
	}
	control.30 {
		iface MIXER
		name 'IEC958 Playback Switch'
		index 3
		value true
		comment {
			access 'read write'
			type BOOLEAN
			count 1
		}
	}
	control.31 {
		iface PCM
		device 9
		name ELD
		value ''
		comment {
			access 'read volatile'
			type BYTES
			count 0
		}
	}
	control.32 {
		iface PCM
		device 3
		name 'Playback Channel Map'
		value.0 0
		value.1 0
		value.2 0
		value.3 0
		value.4 0
		value.5 0
		value.6 0
		value.7 0
		comment {
			access 'read write'
			type INTEGER
			count 8
			range '0 - 36'
		}
	}
	control.33 {
		iface PCM
		device 7
		name 'Playback Channel Map'
		value.0 0
		value.1 0
		value.2 0
		value.3 0
		value.4 0
		value.5 0
		value.6 0
		value.7 0
		comment {
			access 'read write'
			type INTEGER
			count 8
			range '0 - 36'
		}
	}
	control.34 {
		iface PCM
		device 8
		name 'Playback Channel Map'
		value.0 0
		value.1 0
		value.2 0
		value.3 0
		value.4 0
		value.5 0
		value.6 0
		value.7 0
		comment {
			access 'read write'
			type INTEGER
			count 8
			range '0 - 36'
		}
	}
	control.35 {
		iface PCM
		device 9
		name 'Playback Channel Map'
		value.0 0
		value.1 0
		value.2 0
		value.3 0
		value.4 0
		value.5 0
		value.6 0
		value.7 0
		comment {
			access 'read write'
			type INTEGER
			count 8
			range '0 - 36'
		}
	}
	control.36 {
		iface MIXER
		name 'PCM Playback Volume'
		value.0 255
		value.1 255
		comment {
			access 'read write user'
			type INTEGER
			count 2
			range '0 - 255'
			tlv '0000000100000008ffffec1400000014'
			dbmin -5100
			dbmax 0
			dbvalue.0 0
			dbvalue.1 0
		}
	}
}
--endcollapse--


!!All Loaded Modules
!!------------------

ac
acpi_cpufreq
acpi_pad
agpgart
asus_nb_wmi
asus_wmi
battery
bluetooth
btbcm
btintel
btmtk
btrtl
btusb
button
ccm
cec
cfg80211
coretemp
cpufreq_ondemand
drm
drm_buddy
drm_display_helper
drm_kms_helper
ecc
ecdh_generic
hwmon
i2c_algo_bit
i2c_i801
i2c_smbus
i915
idma64
intel_gtt
intel_lpss
intel_lpss_pci
irqbypass
iwlmvm
iwlwifi
joydev
kvm
kvm_intel
ledtrig_audio
mac80211
mc
pcspkr
platform_profile
pps_core
processor
ptp
rfkill
snd
snd_hda_codec
snd_hda_codec_generic
snd_hda_codec_hdmi
snd_hda_codec_realtek
snd_hda_core
snd_hda_intel
snd_hwdep
snd_intel_dspcfg
snd_pcm
snd_rawmidi
snd_seq
snd_seq_device
snd_seq_midi
snd_seq_midi_event
snd_timer
soundcore
sparse_keymap
thermal
ttm
uvc
uvcvideo
video
videobuf2_common
videobuf2_memops
videobuf2_v4l2
videobuf2_vmalloc
videodev
wmi
wmi_bmof
x86_pkg_temp_thermal


!!Sysfs Files
!!-----------

/sys/class/sound/hwC0D0/init_pin_configs:
0x12 0x40000000
0x13 0x411111f0
0x14 0x411111f0
0x15 0x411111f0
0x16 0x411111f0
0x17 0x90170110
0x18 0x411111f0
0x19 0x411111f0
0x1a 0x411111f0
0x1b 0x411111f0
0x1d 0x4043002d
0x1e 0x411111f0
0x1f 0x411111f0
0x21 0x411111f0

/sys/class/sound/hwC0D0/driver_pin_configs:

/sys/class/sound/hwC0D0/user_pin_configs:

/sys/class/sound/hwC0D0/init_verbs:

/sys/class/sound/hwC0D0/hints:

/sys/class/sound/hwC0D2/init_pin_configs:
0x04 0x18560010
0x06 0x18560010
0x08 0x18560010
0x0a 0x18560010
0x0b 0x18560010
0x0c 0x18560010
0x0d 0x18560010
0x0e 0x18560010
0x0f 0x18560010

/sys/class/sound/hwC0D2/driver_pin_configs:

/sys/class/sound/hwC0D2/user_pin_configs:

/sys/class/sound/hwC0D2/init_verbs:

/sys/class/sound/hwC0D2/hints:


!!ALSA/HDA dmesg
!!--------------

[   21.409026] PTP clock support registered
[   21.413782] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100
[   21.413805] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[   21.414811] ACPI: AC: AC Adapter [ADP1] (on-line)
--
[   23.154424] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
[   23.154626] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   23.159840] fbcon: i915drmfb (fb0) is primary device
--
[   23.218265] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-19-0-4.ddc
[   23.218868] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC294: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[   23.218872] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   23.218873] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   23.218875] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   23.218875] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   23.220536] Bluetooth: hci0: Applying Intel DDC parameters completed
--
[   23.223557] Bluetooth: hci0: HCI LE Coded PHY feature bit is set, but its usage is not supported.
[   23.244529] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
[   23.244556] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
[   23.244579] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
[   23.244611] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[   25.984853] iwlwifi 0000:00:14.3: Registered PHC clock: iwlwifi-PTP, with index: 0
--
[ 4426.549852] WARNING: CPU: 4 PID: 20217 at drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c:3902 iwl_mvm_mac_sta_state_common+0xde/0x6fe [iwlmvm]
[ 4426.549873] Modules linked in: ccm cpufreq_ondemand snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic asus_nb_wmi asus_wmi ledtrig_audio sparse_keymap platform_profile wmi_bmof kvm_intel kvm irqbypass coretemp x86_pkg_temp_thermal pcspkr acpi_cpufreq thermal iwlmvm i915 mac80211 ac snd_hda_intel ptp snd_intel_dspcfg pps_core snd_hda_codec battery snd_hda_core snd_hwdep drm_buddy snd_pcm intel_gtt cec ttm video snd_seq_midi snd_seq_midi_event wmi drm_display_helper snd_rawmidi drm_kms_helper snd_seq snd_seq_device drm snd_timer uvcvideo iwlwifi uvc videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 snd videobuf2_common btusb processor videodev agpgart soundcore btrtl mc i2c_algo_bit btintel btbcm hwmon btmtk acpi_pad intel_lpss_pci cfg80211 i2c_i801 bluetooth i2c_smbus intel_lpss idma64 ecdh_generic ecc rfkill button joydev
[ 4426.549947] CPU: 4 PID: 20217 Comm: kworker/4:1 Not tainted 6.6.39 #1
--
[ 4426.550197] WARNING: CPU: 4 PID: 20217 at net/mac80211/util.c:2422 ieee80211_reconfig_stations+0x6e/0x87 [mac80211]
[ 4426.550218] Modules linked in: ccm cpufreq_ondemand snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic asus_nb_wmi asus_wmi ledtrig_audio sparse_keymap platform_profile wmi_bmof kvm_intel kvm irqbypass coretemp x86_pkg_temp_thermal pcspkr acpi_cpufreq thermal iwlmvm i915 mac80211 ac snd_hda_intel ptp snd_intel_dspcfg pps_core snd_hda_codec battery snd_hda_core snd_hwdep drm_buddy snd_pcm intel_gtt cec ttm video snd_seq_midi snd_seq_midi_event wmi drm_display_helper snd_rawmidi drm_kms_helper snd_seq snd_seq_device drm snd_timer uvcvideo iwlwifi uvc videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 snd videobuf2_common btusb processor videodev agpgart soundcore btrtl mc i2c_algo_bit btintel btbcm hwmon btmtk acpi_pad intel_lpss_pci cfg80211 i2c_i801 bluetooth i2c_smbus intel_lpss idma64 ecdh_generic ecc rfkill button joydev
[ 4426.550278] CPU: 4 PID: 20217 Comm: kworker/4:1 Tainted: G        W          6.6.39 #1
--
[ 4426.550528] WARNING: CPU: 4 PID: 20217 at net/mac80211/util.c:2422 ieee80211_reconfig_stations+0x6e/0x87 [mac80211]
[ 4426.550546] Modules linked in: ccm cpufreq_ondemand snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic asus_nb_wmi asus_wmi ledtrig_audio sparse_keymap platform_profile wmi_bmof kvm_intel kvm irqbypass coretemp x86_pkg_temp_thermal pcspkr acpi_cpufreq thermal iwlmvm i915 mac80211 ac snd_hda_intel ptp snd_intel_dspcfg pps_core snd_hda_codec battery snd_hda_core snd_hwdep drm_buddy snd_pcm intel_gtt cec ttm video snd_seq_midi snd_seq_midi_event wmi drm_display_helper snd_rawmidi drm_kms_helper snd_seq snd_seq_device drm snd_timer uvcvideo iwlwifi uvc videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 snd videobuf2_common btusb processor videodev agpgart soundcore btrtl mc i2c_algo_bit btintel btbcm hwmon btmtk acpi_pad intel_lpss_pci cfg80211 i2c_i801 bluetooth i2c_smbus intel_lpss idma64 ecdh_generic ecc rfkill button joydev
[ 4426.550601] CPU: 4 PID: 20217 Comm: kworker/4:1 Tainted: G        W          6.6.39 #1
--
[ 4426.550896] WARNING: CPU: 4 PID: 20217 at net/mac80211/util.c:2422 ieee80211_reconfig_stations+0x6e/0x87 [mac80211]
[ 4426.550922] Modules linked in: ccm cpufreq_ondemand snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic asus_nb_wmi asus_wmi ledtrig_audio sparse_keymap platform_profile wmi_bmof kvm_intel kvm irqbypass coretemp x86_pkg_temp_thermal pcspkr acpi_cpufreq thermal iwlmvm i915 mac80211 ac snd_hda_intel ptp snd_intel_dspcfg pps_core snd_hda_codec battery snd_hda_core snd_hwdep drm_buddy snd_pcm intel_gtt cec ttm video snd_seq_midi snd_seq_midi_event wmi drm_display_helper snd_rawmidi drm_kms_helper snd_seq snd_seq_device drm snd_timer uvcvideo iwlwifi uvc videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 snd videobuf2_common btusb processor videodev agpgart soundcore btrtl mc i2c_algo_bit btintel btbcm hwmon btmtk acpi_pad intel_lpss_pci cfg80211 i2c_i801 bluetooth i2c_smbus intel_lpss idma64 ecdh_generic ecc rfkill button joydev
[ 4426.551027] CPU: 4 PID: 20217 Comm: kworker/4:1 Tainted: G        W          6.6.39 #1
--
[ 4426.551382] WARNING: CPU: 4 PID: 20217 at net/mac80211/util.c:2422 ieee80211_reconfig_stations+0x6e/0x87 [mac80211]
[ 4426.551409] Modules linked in: ccm cpufreq_ondemand snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic asus_nb_wmi asus_wmi ledtrig_audio sparse_keymap platform_profile wmi_bmof kvm_intel kvm irqbypass coretemp x86_pkg_temp_thermal pcspkr acpi_cpufreq thermal iwlmvm i915 mac80211 ac snd_hda_intel ptp snd_intel_dspcfg pps_core snd_hda_codec battery snd_hda_core snd_hwdep drm_buddy snd_pcm intel_gtt cec ttm video snd_seq_midi snd_seq_midi_event wmi drm_display_helper snd_rawmidi drm_kms_helper snd_seq snd_seq_device drm snd_timer uvcvideo iwlwifi uvc videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 snd videobuf2_common btusb processor videodev agpgart soundcore btrtl mc i2c_algo_bit btintel btbcm hwmon btmtk acpi_pad intel_lpss_pci cfg80211 i2c_i801 bluetooth i2c_smbus intel_lpss idma64 ecdh_generic ecc rfkill button joydev
[ 4426.551513] CPU: 4 PID: 20217 Comm: kworker/4:1 Tainted: G        W          6.6.39 #1
--
[ 4426.551895] WARNING: CPU: 4 PID: 20217 at drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c:2544 iwl_mvm_bss_info_changed_station_common+0x3b/0xbe [iwlmvm]
[ 4426.551923] Modules linked in: ccm cpufreq_ondemand snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic asus_nb_wmi asus_wmi ledtrig_audio sparse_keymap platform_profile wmi_bmof kvm_intel kvm irqbypass coretemp x86_pkg_temp_thermal pcspkr acpi_cpufreq thermal iwlmvm i915 mac80211 ac snd_hda_intel ptp snd_intel_dspcfg pps_core snd_hda_codec battery snd_hda_core snd_hwdep drm_buddy snd_pcm intel_gtt cec ttm video snd_seq_midi snd_seq_midi_event wmi drm_display_helper snd_rawmidi drm_kms_helper snd_seq snd_seq_device drm snd_timer uvcvideo iwlwifi uvc videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 snd videobuf2_common btusb processor videodev agpgart soundcore btrtl mc i2c_algo_bit btintel btbcm hwmon btmtk acpi_pad intel_lpss_pci cfg80211 i2c_i801 bluetooth i2c_smbus intel_lpss idma64 ecdh_generic ecc rfkill button joydev
[ 4426.552027] CPU: 4 PID: 20217 Comm: kworker/4:1 Tainted: G        W          6.6.39 #1
--
[ 4426.666270] WARNING: CPU: 4 PID: 18331 at net/mac80211/sta_info.c:1410 __sta_info_destroy_part2+0x3c/0x1f8 [mac80211]
[ 4426.666283] Modules linked in: ccm cpufreq_ondemand snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic asus_nb_wmi asus_wmi ledtrig_audio sparse_keymap platform_profile wmi_bmof kvm_intel kvm irqbypass coretemp x86_pkg_temp_thermal pcspkr acpi_cpufreq thermal iwlmvm i915 mac80211 ac snd_hda_intel ptp snd_intel_dspcfg pps_core snd_hda_codec battery snd_hda_core snd_hwdep drm_buddy snd_pcm intel_gtt cec ttm video snd_seq_midi snd_seq_midi_event wmi drm_display_helper snd_rawmidi drm_kms_helper snd_seq snd_seq_device drm snd_timer uvcvideo iwlwifi uvc videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 snd videobuf2_common btusb processor videodev agpgart soundcore btrtl mc i2c_algo_bit btintel btbcm hwmon btmtk acpi_pad intel_lpss_pci cfg80211 i2c_i801 bluetooth i2c_smbus intel_lpss idma64 ecdh_generic ecc rfkill button joydev
[ 4426.666315] CPU: 4 PID: 18331 Comm: kworker/4:2 Tainted: G        W          6.6.39 #1
--
[ 4426.666529] WARNING: CPU: 4 PID: 18331 at net/mac80211/sta_info.c:1439 __sta_info_destroy_part2+0x155/0x1f8 [mac80211]
[ 4426.666537] Modules linked in: ccm cpufreq_ondemand snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic asus_nb_wmi asus_wmi ledtrig_audio sparse_keymap platform_profile wmi_bmof kvm_intel kvm irqbypass coretemp x86_pkg_temp_thermal pcspkr acpi_cpufreq thermal iwlmvm i915 mac80211 ac snd_hda_intel ptp snd_intel_dspcfg pps_core snd_hda_codec battery snd_hda_core snd_hwdep drm_buddy snd_pcm intel_gtt cec ttm video snd_seq_midi snd_seq_midi_event wmi drm_display_helper snd_rawmidi drm_kms_helper snd_seq snd_seq_device drm snd_timer uvcvideo iwlwifi uvc videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 snd videobuf2_common btusb processor videodev agpgart soundcore btrtl mc i2c_algo_bit btintel btbcm hwmon btmtk acpi_pad intel_lpss_pci cfg80211 i2c_i801 bluetooth i2c_smbus intel_lpss idma64 ecdh_generic ecc rfkill button joydev
[ 4426.666559] CPU: 4 PID: 18331 Comm: kworker/4:2 Tainted: G        W          6.6.39 #1
--
[ 4426.666735] WARNING: CPU: 4 PID: 18331 at net/mac80211/sta_info.c:1447 __sta_info_destroy_part2+0x17a/0x1f8 [mac80211]
[ 4426.666743] Modules linked in: ccm cpufreq_ondemand snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic asus_nb_wmi asus_wmi ledtrig_audio sparse_keymap platform_profile wmi_bmof kvm_intel kvm irqbypass coretemp x86_pkg_temp_thermal pcspkr acpi_cpufreq thermal iwlmvm i915 mac80211 ac snd_hda_intel ptp snd_intel_dspcfg pps_core snd_hda_codec battery snd_hda_core snd_hwdep drm_buddy snd_pcm intel_gtt cec ttm video snd_seq_midi snd_seq_midi_event wmi drm_display_helper snd_rawmidi drm_kms_helper snd_seq snd_seq_device drm snd_timer uvcvideo iwlwifi uvc videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 snd videobuf2_common btusb processor videodev agpgart soundcore btrtl mc i2c_algo_bit btintel btbcm hwmon btmtk acpi_pad intel_lpss_pci cfg80211 i2c_i801 bluetooth i2c_smbus intel_lpss idma64 ecdh_generic ecc rfkill button joydev
[ 4426.666764] CPU: 4 PID: 18331 Comm: kworker/4:2 Tainted: G        W          6.6.39 #1
--
[ 4426.666955] WARNING: CPU: 4 PID: 18331 at net/mac80211/sta_info.c:421 sta_info_free+0x47/0xd7 [mac80211]
[ 4426.666965] Modules linked in: ccm cpufreq_ondemand snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic asus_nb_wmi asus_wmi ledtrig_audio sparse_keymap platform_profile wmi_bmof kvm_intel kvm irqbypass coretemp x86_pkg_temp_thermal pcspkr acpi_cpufreq thermal iwlmvm i915 mac80211 ac snd_hda_intel ptp snd_intel_dspcfg pps_core snd_hda_codec battery snd_hda_core snd_hwdep drm_buddy snd_pcm intel_gtt cec ttm video snd_seq_midi snd_seq_midi_event wmi drm_display_helper snd_rawmidi drm_kms_helper snd_seq snd_seq_device drm snd_timer uvcvideo iwlwifi uvc videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 snd videobuf2_common btusb processor videodev agpgart soundcore btrtl mc i2c_algo_bit btintel btbcm hwmon btmtk acpi_pad intel_lpss_pci cfg80211 i2c_i801 bluetooth i2c_smbus intel_lpss idma64 ecdh_generic ecc rfkill button joydev
[ 4426.667001] CPU: 4 PID: 18331 Comm: kworker/4:2 Tainted: G        W          6.6.39 #1
--
[ 4426.686262] WARNING: CPU: 4 PID: 18331 at net/mac80211/key.c:1160 ieee80211_free_keys+0x103/0x15b [mac80211]
[ 4426.686301] Modules linked in: ccm cpufreq_ondemand snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic asus_nb_wmi asus_wmi ledtrig_audio sparse_keymap platform_profile wmi_bmof kvm_intel kvm irqbypass coretemp x86_pkg_temp_thermal pcspkr acpi_cpufreq thermal iwlmvm i915 mac80211 ac snd_hda_intel ptp snd_intel_dspcfg pps_core snd_hda_codec battery snd_hda_core snd_hwdep drm_buddy snd_pcm intel_gtt cec ttm video snd_seq_midi snd_seq_midi_event wmi drm_display_helper snd_rawmidi drm_kms_helper snd_seq snd_seq_device drm snd_timer uvcvideo iwlwifi uvc videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 snd videobuf2_common btusb processor videodev agpgart soundcore btrtl mc i2c_algo_bit btintel btbcm hwmon btmtk acpi_pad intel_lpss_pci cfg80211 i2c_i801 bluetooth i2c_smbus intel_lpss idma64 ecdh_generic ecc rfkill button joydev
[ 4426.686382] CPU: 4 PID: 18331 Comm: kworker/4:2 Tainted: G        W          6.6.39 #1


!!Packages installed
!!--------------------

and thanks again.

[Caramel]

There is a firmware for some Intel audio :
https://packages.debian.org/bookworm/fi ... sof-signed

SOF is for "Sound Open Format" (EDIT:wrong)but the deb package is in the non-free archive area

EDIT :SOF is for "Sound Open Firmware"

[Federico]

There is a firmware for some Intel audio :
https://packages.debian.org/bookworm/fi ... sof-signed

SOF is for "Sound Open Format" but the deb package is in the non-free archive area

Installed. That didn't unfortunately make any difference. It added the folder /lib/firmware/intel/sof with some stuff inside (firmwares) and the system doesn't seem to care about its existence;

Screenshot(28).jpg (89.65 KiB) Viewed 2200 times

As far as I know, it is even not possible on EasyOS to add drivers as external modules (or even just to blacklist modules), because the file /proc/modules gets overwritten everytime the system boots. I don't know exactly the mechanism which lets EasyOS consider specific firmwares when placed on specific folders (like the bluetooth ones for example).

[Federico]

Now, trying to read and interpret the output of the script, it can be deduced that:

1) The module snd_hda_intel is loaded, because there are these sctions:

Code: Select all

!!Loaded ALSA modules
!!-------------------

snd_hda_intel (card 0)

!!All Loaded Modules
!!------------------

ac
acpi_cpufreq
acpi_pad
agpgart
asus_nb_wmi
asus_wmi
battery
bluetooth
btbcm
btintel
btmtk
btrtl
btusb
button
ccm
cec
cfg80211
coretemp
cpufreq_ondemand
drm
drm_buddy
drm_display_helper
drm_kms_helper
ecc
ecdh_generic
hwmon
i2c_algo_bit
i2c_i801
i2c_smbus
i915
idma64
intel_gtt
intel_lpss
intel_lpss_pci
irqbypass
iwlmvm
iwlwifi
joydev
kvm
kvm_intel
ledtrig_audio
mac80211
mc
pcspkr
platform_profile
pps_core
processor
ptp
rfkill
snd
snd_hda_codec
snd_hda_codec_generic
snd_hda_codec_hdmi
snd_hda_codec_realtek
snd_hda_core
snd_hda_intel <========================
snd_hwdep
snd_intel_dspcfg
snd_pcm
snd_rawmidi
snd_seq
snd_seq_device
snd_seq_midi
snd_seq_midi_event
snd_timer
soundcore
sparse_keymap
thermal
ttm
uvc
uvcvideo
video
videobuf2_common
videobuf2_memops
videobuf2_v4l2
videobuf2_vmalloc
videodev
wmi
wmi_bmof
x86_pkg_temp_thermal

2) Alsa configures also 4 audio input devices on the system, as they can be found on the HDA-Intel Codec information section:

Code: Select all

!!HDA-Intel Codec information
!!---------------------------


Node 0x07 [Audio Input] wcaps 0x10051b: Stereo Amp-In
  Device: name="ALC294 Analog", type="Audio", device=0
  Amp-In caps: ofs=0x17, nsteps=0x3f, stepsize=0x02, mute=1
  Amp-In vals:  [0x97 0x97]
  Converter: stream=1, channel=0
  SDI-Select: 0
  PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 1
     0x24
Node 0x08 [Audio Input] wcaps 0x10051b: Stereo Amp-In
  Device: name="ALC294 Alt Analog", type="Audio", device=2
  Amp-In caps: ofs=0x17, nsteps=0x3f, stepsize=0x02, mute=1
  Amp-In vals:  [0x97 0x97]
  Converter: stream=0, channel=0
  SDI-Select: 0
  PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 1
     0x23
Node 0x09 [Audio Input] wcaps 0x10051b: Stereo Amp-In
  Amp-In caps: ofs=0x17, nsteps=0x3f, stepsize=0x02, mute=1
  Amp-In vals:  [0x97 0x97]
  Converter: stream=0, channel=0
  SDI-Select: 0
  PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 1
     0x22
Node 0x0a [Audio Input] wcaps 0x100711: Stereo Digital
  Converter: stream=0, channel=0
  SDI-Select: 0
  Digital:
  Digital category: 0x0
  IEC Coding Type: 0x0
  PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 1
     0x1f

At this point the questions are:

- Why 4 and not just one?

- Why aren't Alsamixer and Pavucontrol able to detect these devices?

The point of the question is that the Alsa configuration looks to be OK. The problem must be somewhere else. Maybe the X server configuration?

[Caramel]

There is a firmware for some Intel audio :
https://packages.debian.org/bookworm/fi ... sof-signed

SOF is for "Sound Open Format" but the deb package is in the non-free archive area

Installed. That didn't unfortunately make any difference. It added the folder /lib/firmware/intel/sof with some stuff inside (firmwares) and the system doesn't seem to care about its existence;

The support for Open Sound Firmware must be activated in the kernel. It is not in Easy.

[FeodorF]

Hello @Caramel ,

I have used my USB sound card and noticed that the microphone doesn't show up at ALSA, but it shows up at Volume Control. Problem, I don't have a microphone to run the test.

USB-Microphone-test.png (13.47 KiB) Viewed 2111 times

[BarryK]

There is a firmware for some Intel audio :
https://packages.debian.org/bookworm/fi ... sof-signed

SOF is for "Sound Open Format" but the deb package is in the non-free archive area

Installed. That didn't unfortunately make any difference. It added the folder /lib/firmware/intel/sof with some stuff inside (firmwares) and the system doesn't seem to care about its existence;

The support for Open Sound Firmware must be activated in the kernel. It is not in Easy.

It looks like need to compile the kernel with this enabled:

https://cateee.net/lkddb/web-lkddb/SND_ ... LEVEL.html

OK, will do.

[Federico]

@ Barry K

Dear Barry, thank you very much. It would be very nice to let also the integrated mic work. I think that this issue existed already on EasyOS Kirkstone, but I didn't notice it (and obviously that this could help many, making EasyOS jet more useful).

While the Intel firmware-sof-signed package was installed it happened also on my system a couple of times that the audio did not load / work at all or that the X server started completely frozen. And when trying to shut down the system I got this infinite loop:

IMG_20240719_113130.jpg (375.1 KiB) Viewed 2086 times

After uninstalling the package, everything seems to be back to normal / correct operation.

[Caramel]

Hello @Caramel ,

I have used my USB sound card and noticed that the microphone doesn't show up at ALSA, but it shows up at Volume Control. Problem, I don't have a microphone to run the test.
USB-Microphone-test.png

See if

Code: Select all

modprobe snd_soc_dmic

changes anything

[Federico]

Good news. With the release of EasyOS Scarthgap, featuring Linux kernel 6.6, EasyOS has jumped up 8 positions on the DistroWatch ranking and occupies now the 24th place. More over, 3 new positive reviews of it have been posted.

[FeodorF]

@Caramel ,

modprobe snd_soc_dmic

cool - now Volume Control and ALSA capture R+L are in sync. If I move the slider from Silence to 100% capture follows.
Will have to buy a new microphone tomorrow to complete the test.

[retiredt00]

Dear BarryK
I am wondering what I may be doing wrong here.

I downloaded the Easy 6.1 image, mounted and copied easyos folder in an ext4 partition.
Added the stanza shown in the grup4dos menu (Geany has line wrapping as you can see from the line numbers) and I get the error showing.
Indeed there is nothing is the easyos folder than what is shown before or after the boot attempt.
This is in a qemu virtual machine along other puppies

I did not try easyos since 3.2, so apologies if I missed something important already said that explains my problem
Thank you