Fossapup-Fire

[amethyst]

This is a modular, minimalized, FossaPup9.5 system (about one-third in size of the original release) but don't be fooled, it has almost all of the functionality of the original, full version. Most of the usual Puppy applications are included plus some smaller applications and there are some significant improvements. This is great for (especially) older machines, as a rescue system or for those that still like to keep things small and functional. I use it almost exclusively as my daily driver on my old desktop computer 2G Ram/CPU and it does everything I need. The included ydrv has the additional applications and the initrd.gz is a modified version to enable additional drives like a bdrv, cdrv., ddrv, etc.
NOTE: A browser is not included. I recommend mikewalsh's portable Chrome as browser here: https://mega.nz/folder/HDZElDQK#bbkJFR0QPA3q13JbEnAN6g.
Download link for iso (187MB): https://drive.google.com/file/d/1D8v0L- ... sp=sharing

[Jasper]

Thanks for this, must have missed it beforehand

[Marv]

Thanks, Teeny-tiny and up and running exactly as packaged on my gen 2 i5 based Fujitsu S761 laptop, circa 2012. Smallest pup I've run in a while but lively and happy.

Nothing added wrt firmware as my wifi card is kernel supported in the stock kernel. SNS connection solid.

Dmesg pretty clean, the only fail is:

Code: Select all

root# dmesg | grep -i fail
[    0.307726] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.789885] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[    0.790987] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1

Clipboard working, lidsuspend working on this hardware -requires PB push to wake but that's ok-

All my portables run just fine, all current: Sylpheed, Brave, Slimjet, un-googled chromium. LibreOffice and MasterPDF Editor (older versions set up as portables) also run correctly.

Sound (youtubes checked) working in browsers OOTB, no other multimedia checks as yet.

Nice to see evince on board.

I don't usually like dark themes but the stock one works well enough.

Posting from Brave v1.62.156 now.

One question, which version of @ozsouth basic was this based on?

Here's to the 'master of pruning'

[amethyst]

Thanks, Teeny-tiny and up and running exactly as packaged on my gen 2 i5 based Fujitsu S761 laptop, circa 2012. Smallest pup I've run in a while but lively and happy.

Nothing added wrt firmware as my wifi card is kernel supported in the stock kernel. SNS connection solid.

Dmesg pretty clean, the only fail is:

Code: Select all

root# dmesg | grep -i fail
[    0.307726] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.789885] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[    0.790987] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1

Clipboard working, lidsuspend working on this hardware -requires PB push to wake but that's ok-

All my portables run just fine, all current: Sylpheed, Brave, Slimjet, un-googled chromium. LibreOffice and MasterPDF Editor (older versions set up as portables) also run correctly.

Sound (youtubes checked) working in browsers OOTB, no other multimedia checks as yet.

Nice to see evince on board.

I don't usually like dark themes but the stock one works well enough.

Posting from Brave v1.62.156 now.

One question, which version of @ozsouth basic was this based on?

Here's to the 'master of pruning'

The one I downloaded at the time, I think it was the third or second last base version without the additional programs (it was very bare and not much of use at the time). I did a lot of corrections and additions after that (you can see on that thread some of my posts at the time). I don't know if he included some of that afterwards in his follow-up releases, didn't check. So this is basically what I ended up with myself and thought I would share it for those interested. ozsouth did the hard work with the initial pruning of philb's official release though...

[ozsouth]

I did start a series I called micro & sent someone (not amethyst) v1 & v2, but decided by v3, at 159mb it wasn't very useful. It had
Ted, evince, calcoo, mhwaveedit, minixcal, mtpaint, gparted, pupmtp & gftp. Netsurf as adrv, updated 5.4 kernel & security files.
Polished products aren't my specialty, so @amethyst 's pup will be better.

[amethyst]

@Marv BTW - I've added extra JWM themes so you can change to a lighter theme. Select JWMDesk Manager from menu and then click JWM Theme and change. I've also added extra icons themes which you can also change.

[amethyst]

After running this a bit I wanted to change the JWM button scheme but discovered not all of them work for me. Attached a .pet with the original buttons and some others added. All works for me now. You can change the JWM button scheme as follows: JWMDesk Manager from menu > click Windows tab > Theme and Buttons (the second block) > select and change.

[Marv]

@amethyst , Thanks for the JWM add-ons. I'll add the buttons to my working main SFS. All good on themes. All in all, continues to be a slick very small but quite usable JWM based pup. I see it as an ideal small USB stick install with one portable browser on board. Haven't gotten there yet...

I'm currently running Fire using a ydrv, basically @peebees' 13.8MB one for Fossapup-Less IIRC with a few look'n'feel changes and application default settings. Gives me LXDE and PCManFM for not too much added weight.

I've checked multimedia stuff a bit more and the included gnome-mplayer works fine on CDs and DVDs and just mplayer set as the audioplayer default seems fine also.

Thanks,

[amethyst]

Before I step away from this - I can't get pequalizer to work with this edition which is a pity since you won't have a system wide sound equalizer. However, Gnome-Mplayer is installed and you can use mplayer's builtin sound equalizer when using gnome-mplayer. One way of doing this is to invoke the equalizer in gnome-player's preferences like this: Run Gnome-Mplayer > Edit > Preferences > Under Mplayer tab add the necessary in the blank space under Extra Options for Mplayer. Example:

Code: Select all

-af equalizer=3:3:0:0:0:0:0:0:7:7

Note that there are 10 "sliders" from left to right separated by a colon. Values are from 0 to 10 and the first "slider" is highest bass value and the last highest treble (so the "sliders" are for bass to treble from left to right) . As you can see in this example I have 3 for my first two bass "sliders" and 7 for my last 2 treble "sliders" levels. Specifying the first two for the bass levels and the last 2 for treble are generally sufficient for me but you can of course play around with the values to find what works best for you.

More: So tried an equalizer when on the net. Downloaded and installed the addon called Equalizer for Chrome browser which does seem to work okay for me (tested with youtube). So that then covers it basically for a sound equalizer when using the internet too. Cool.

[Marv]

@Jasper I've been using 'fire' off and on for a while now and continue to like its slimness. I have really only changed two things in it other than my own preferences -abiword out, geany & LXDE/PCManFM in- I added libdvdcss from the puppy-common64 repo so that all dvds would play and changed the permissions of the /usr/lib/cups folder so that the cups admin files etc. would be found and cups-devd etc. would run. chmod -R 755 /usr/lib/cups did the trick. cupsd wasn't happy with the 777 permissions on that directory. Post change, printer setup of my Brother laser was normal. The key to that puzzle was here: viewtopic.php?p=91460#p91460

Cheers,

[Jasper]

@Marv this is the last build of libdvdcss

libdvdcss-1.4.3
https://www.mediafire.com/file/uwwlatmn ... 4.pet/file

[amethyst]

New upload see first post. I've been using my previous version for the last week and made some new improvements (including things like modules for hardware acceleration which will be useful if your hardware support it, enabling zram swap, etc.). The zip file contains the base sfs, ydrv and modified initrd to enable more drives (bdrv, cdrv. ddrv, edrv, etc). Use a kernel which supports your hardware (aufs) and your choice of browser (I use Chromium).

[amethyst]

This distribution does not have pEqualizer installed (and I can't get it to work anyway) but you can access Alsa's equalizer instead (pEqualizer is just a frontend for Alsa's equalizer). Make sure you have the file .asoundrc present in /root (if you see a backup of that file .asoundrc.bak, delete the .bak extension) but if not, try the attached zip file, unzip and place the file in /root. To access and set the levels for the equalizer, run the following command in terminal:

Code: Select all

alsamixer -D equal

Note that once you have set the equalizer levels with the above command, it will affect the sound "system wide" ie. media you play with your media player as well as when on the internet (like playing youtube videos).

[amethyst]

I ripped glibc2.39 from Noblepup and tried it with this puplet. Totally experimental (use at own risk) and I just loaded it on top of the existing system for fun. May or may not be useful for something that needs newer glibc. Sharing it for what it's worth (6MB download): https://drive.google.com/file/d/1pmkZwl ... sp=sharing
Need to have preference to your running base sfs so load it as an adrv, bdrv (safest, so no installing). Note that this may break things. It did break my installation package of Abiword/Gnumeric but otherwise seems fine.

[gychang]

where can I download this pup?

[amethyst]

where can I download this pup?

See first post.

[qk701user]

@Amethyst

would you mind give some explanation how to use the glibc2.39.sfs with your fossapup-fire.

[amethyst]

@Amethyst

would you mind give some explanation how to use the glibc2.39.sfs with your fossapup-fire.

Rename the downloaded file to adrv_fossapup64_9.5.sfs > place it in the folder with the other puppy files > reboot

[gychang]

where can I download this pup?

See first post.

maybe I am missing something, I downloaded and extracted the file. Do I replace the files into the full version of Fossapup64?...

[amethyst]

where can I download this pup?

See first post.

maybe I am missing something, I downloaded and extracted the file. Do I replace the files into the full version of Fossapup64?...

NO. This is a distribution on its own but you need to add your choice of kernel (in other words a zdrv and its vmlinuz file), an fdrv (if needed) and your choice of browser.

[amethyst]

Made an iso for this. See first post for download link.