LXQtPup - various Pups with the LXQt desktop

[peebee]

previous discussion thread on murga-linux

Addons for LxPupsc....

64-bit bdrv download
...

Screenshot.png (196.21 KiB) Viewed 267 times

[peebee]

Update 01-Dec-2020

64-bit LXQt ydrvs have been updated to LXQt-0.16 and Qt5-5.15.2

ydrvs are available for: Bionic64 (older version), Fossa64, ScPup64 and LxPupSc64

32-bit LXQt ydrvs have been updated to LXQt-0.16 and Qt5-5.15.2

ydrvs are available for: GroovyPup32, ScPup32 and LxPupSc

links at:
viewtopic.php?p=295#p295

[JASpup]

You're more of a system creator, but I'm trying to understand from a user standpoint:

Lubuntu ditched LXDE for LXQt during Bionic.

Have you shared you feelings about maintaining LXDE?

Why should a user lean towards one or the other?

I have good books I don't write for:
a) no monetary objective
b) a belief they wouldn't be read

Fixing either would be good enough motive. Distro adoption seems more haphazard word-of-mouth.

After my challenges with the useful but quaint 32Slacko 6, I would probably boot 64 Bionic.

[mikeslr]

@ rockedge, peebee's links no longer function.

To everyone else currently seeking the LXQtPup ydrv's, you'll find the links from this post, viewtopic.php?p=17707#p17707

[peebee]

@ rockedge, peebee's links no longer function.

To everyone else currently seeking the LXQtPup ydrv's, you'll find the links from this post, viewtopic.php?p=17707#p17707

Updated.

[peebee]

LXQt-1.0.0 has been released.......

Arch Linux has built both 32-bit and 64-bit "testing" versions

for testing:
ydrv for ScPup32-21.04
ydrv for ScPup64-21.04
.

screenshot.png (39.6 KiB) Viewed 6048 times

.

Screenshot-qt.png (94.06 KiB) Viewed 6027 times

[peebee]

The LXQt team announces the release of LXQt 1.2.0, the Lightweight Qt Desktop Environment.

LXQtPup may be updated once Arch binaries become available.....

[peebee]

ydrv for LxPupSc64-23.01 with Qt-5.15.8
.

Screenshot-lxqt.png (202.6 KiB) Viewed 4852 times

[peebee]

ydrv for LxPupSc32-23.01 with Qt-5.15.8
.

Screenshot-LXQt.png (203.26 KiB) Viewed 4851 times

[peebee]

The LXQt team announces the release of LXQt 1.3.0, the Lightweight Qt Desktop Environment.

[peebee]

Fairly easy to do..... can maybe be made for other recent Pups (it is built from Arch64 components and S15Pup64 is "too old"....) such as VoidPup64

ydrv addition to LxPupSc64-23.01+3

Screenshot.png (207.88 KiB) Viewed 4505 times

[peebee]

New bdrv addons for LxPupSc / LxPupSc64 - see post #1

[peebee]

LXQt-1.4.0 bdrv is now available for LxPupSc64:
https://sourceforge.net/projects/lxpup/ ... 64/addons/

Screenshot-LXQt.png (196.72 KiB) Viewed 3936 times

[Jasper]

Hi @peebee

I wanted to try out your offering and am a bit confused as to what I need to do next

I have an ISO and a delta file.

I am guessing that the delta file will update the ISO?

I am unsure was what to do next

Can you let me know or if anyone else can point me in the right direction?

[peebee]

Can you let me know or if anyone else can point me in the right direction?

Hi Jasper

You have the +0 .iso and the delta from +4 to +5l ........ so you have a step missing - the +0 to +4 delta:
https://sourceforge.net/projects/lxpup/ ... a/download

Click on the deltas in turn to produce the +4 .iso and then the +5l .iso

Click on the +5l .iso to open it and copy the .sfs files to your frugal install directory.

Move the LXQt-bdrv to the same directory and then rename it to just bdrv (i.e. remove LXQt-)

Reboot into the new install.

[Jasper]

Thanks @peebee

I plan to use a USB initially to see how I like the OS

[Jasper]

@peebee

Managed to update the ISO with all the delta files

Is it also possible to update the kernel?

How would I accomplish this?

This the current content of my installation:

[rockedge]

Don't know if this is included but......try in a terminal change_kernels
If so it's a nice GUI and makes a switch easy when using a 32 bit huge type kernel version compiled with AUFS. Otherwise extract and open the downloaded 32 bit huge kernel package directory. Inside are files that replace those in your distro. Make sure the names match, so rename if needed.

Swap the vmlinuz and zdrv SFS and depending on the version of the kernel swap in the fdrv SFS.

In theory this should work

[peebee]

Is it also possible to update the kernel?
How would I accomplish this?
This the current content of my installation:

Yes - you need to replace the 2 files: vmlinuz & zdrv***

You need a 64-bit kernel for LxPupSc64 - try: https://sourceforge.net/projects/lxpup/ ... 2/download
click to open it and extract kernel-modules and vmlinuz and rename them appropriately.

On your screenshot - the 30MB drv*** file looks odd - what is it???? - probably a renamed LXQt bdrv?

[Jasper]

@peebee

Yes, it is a a renamed LXQt bdrv

Grabbing the new kernel files now, thank you!!

[peebee]

The LXQt team announces the release of LXQt 2.0.0, the Lightweight Qt Desktop Environment.
Highlights
General

LXQt 2.0.0 is based on Qt ≥ 6.6. For supporting styling and LXQt File Dialog with Qt5-based apps, libqtxdg-3.12.0, lxqt-qtplugin-1.4.1 and libfm-qt-1.4.0 can be installed alongside their Qt6-based versions in LXQt 2.0.0.
PCManFM-Qt's desktop module, LXQt Runner and LXQt Desktop Notifications are completely ready to be used under Wayland compositors which support the "layer shell protocol", like LabWC, Wayfire, kwin_wayland, Hyprland, Sway,…
Wayland will be the main target for LXQt 2.1.0, as Qt6 was for LXQt 2.0.0. The components which are not ready for Wayland yet include ScreenGrab, LXQt Global Shortcuts, LXQt Panel's task-bar and keyboard indicator (but LXQt Panel can be used under Wayland without those plugins), some input settings, and settings of monitor, power button, and screen locker. However, most Wayland compositors have tools that can be used instead of them, such that an LXQt-Wayland session is already possible for advanced users.
LXQt Panel has a new default application menu called Fancy Menu, featuring "Favorites", "All Applications", and an improved search.
QTerminal is the only app whose Qt6 port will be released separately -- complications were encountered due to the removal of legacy encodings in Qt6. Until then, its Qt5 version 1.4.0 could be used.

[peebee]

Frankly I'm somewhat amazed......
Sneek peek - Qt6.7.0 based LXQt-2.0.0 ........ first run; work to do
.

Screenshot.png (200.75 KiB) Viewed 2403 times

[Jasper]

@peebee

As you have successfully compiled with QT6

Can I bring to your attention another QT (5) based desktop environment:

https://github.com/theCheeseboard/thedesk

I have not compiled it myself

[peebee]

As you have successfully compiled with QT6

Hi - I actually just repackage Arch Linux components....

[Jasper]

Will look forward to the next release and hopefully, all components of the DE will be working

[peebee]

Will look forward to the next release and hopefully, all components of the DE will be working

Depends what you mean by "all".....

https://archlinux.org/groups/x86_64/lxqt/

[peebee]

The bdrv to add LXQt-2.0 to LxPupSc64 is available for testing from:
https://sourceforge.net/projects/lxpup/ ... 64/addons/ LXQt2-bdrv_LxPupSc64_23.01.sfs

240519 - Qterminal is now Qt6 based.

[peebee]

The bdrv to add LXQt-2.1 to LxPupSc64-23.01+8 is available for testing from:
https://sourceforge.net/projects/lxpup/ ... 64/addons/ LXQt-2.1-bdrv_LxPupSc64_23.01.sfs

Qt-6.8.0

Screenshot.png (196.21 KiB) Viewed 267 times

[Marv]

So far, I can't get the LXQT desktop to launch. Using LXQt-2.1-bdrv_LxPupSc64_23.01.sfs (renamed bdrv_xxxx as usual) in a pristine install of LxPupSc64-23.01+6-T. Re-downloaded both just to check, same results. It's the same LxPupSc64 I've been running on this hardware (Fujitsu S761) for quite a while. Frugal install to SSD.

What I see when LXQT tries to start (I've run it in terminal to capture the error messages, same as seen on initial start) is:

Code: Select all

# lxqt-session
lxqt-session: /usr/lib64/libstdc++.so.6: version `CXXABI_1.3.15' not found (required by /usr/lib/libQt6Core.so.6)
lxqt-session: /usr/lib64/libstdc++.so.6: version `CXXABI_1.3.15' not found (required by /usr/lib/libicui18n.so.75)

The libstdc++.so.6 symlink points to libstdc++.so.6.0.32 in /usr/lib64, seems correct.

Any suggestions for what to try?

Thanks,

[peebee]

Ahhhh - I tested on +7T
https://sourceforge.net/projects/lxpup/ ... /interims/

I'll see if I can get +6 to work.........