Hello forums.
I curious to know why the oem default cpu temp monitor that rides in the right hand side of the panel will not work with my AMD APU processor.
Temperatures show up in Pup system info app under sensors so I know the sensors are being detected and read.
Is it possible to download and install Psensor and or Xsensors both have proven to work in other Linux distros I've used in the past.
I've tried to run lm-sensors but no go.
The default cpu temp monitor temperature monitoring software works great with my Intel boxes.
Thanks.
My install is to a 16 GB USB flash drive as a frugal install.
Here's my system.
Code: Select all
# inxi -Fxz
System: Host: EASYPC19052 Kernel: 6.6.47 x86_64 (64 bit) Desktop: JWM 2.4.2 Distro: EasyOS 6.3.1 scarthgap64
Machine: Device: desktop Mobo: ASUSTeK model: M11BB v: Rev X.0x BIOS: ASUSTeK (Licensed from AMI) v: 0307 date: 08/07/2013
CPU: Quad core AMD A10-6700 APU with Radeon HD Graphics (-MCP-) cache: 8192 KB
flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm) bmips: 29615
clock speeds: max: 3700 MHz 1: 1800 MHz 2: 2616 MHz 3: 2700 MHz 4: 2700 MHz
Graphics: Card: Advanced Micro Devices [AMD/ATI] Richland [Radeon HD 8670D] bus-ID: 00:01.0
Display Server: X.org 1.21.1.13 drivers: ati,radeon (unloaded: modesetting,fbdev,vesa)
tty size: 124x35 Advanced Data: N/A for root
Audio: Card-1 Advanced Micro Devices [AMD] FCH Azalia Controller driver: snd_hda_intel bus-ID: 00:14.2
Card-2 Advanced Micro Devices [AMD/ATI] Trinity HDMI Audio Controller
driver: snd_hda_intel bus-ID: 00:01.1
Sound: Advanced Linux Sound Architecture v: k6.6.47
Network: Card: Realtek RTL8111/8168/8211/8411 PCI Express Gigabit Ethernet Controller
driver: r8169 port: e000 bus-ID: 03:00.0
IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives: HDD Total Size: NA (-)
ID-1: /dev/sda model: ST9320325AS size: 320.1GB
ID-2: /dev/sdc model: USB_2.0_FD size: 15.5GB
RAID: No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors: None detected - is lm-sensors installed and configured?
Info: Processes: 229 Uptime: 49 min Memory: 1175.7/15207.8MB Init: SysVinit runlevel: 5 Gcc sys: N/A
Client: Shell (bash 5.2.211) inxi: 2.3.8
#