QuickPup 21.04 [RETIRED, succeeded by QuickPup64]

Moderator: Forum moderators

mistfire
Posts: 639
Joined: Thu Jul 16, 2020 2:16 am
Location: CALABARZON, PH
Has thanked: 3 times
Been thanked: 139 times

Re: QuickPup 20.06.11

Post by mistfire »

QuickPup 20.06.11 released

Changes:
* Fixed ALSA startup
* Fixed Xorg auto setup
* Fixed PPM handling of Arch Linux packages
* Improved screen locking
* With event sounds (Sound theme switcher included)
* More bugfixes

Download (32-bit only): https://drive.google.com/file/d/1m4yhkI ... sp=sharing
MD5 Checksum: 5430e872863e9e74de1c57573aef0100

one
Posts: 239
Joined: Sun Jul 12, 2020 7:53 am
Has thanked: 16 times
Been thanked: 57 times

Re: QuickPup 20.06.11

Post by one »

Hi mistfire,

i did a quick test of your latest quickpup_20.6.11. Frugal install on usb stick/FAT32/g4dos. Booted well - but no eth0-autoconnect.
Tray says "networkmanager is not running". I tried SNS and network wizard, but no success. Then I used frisbee and restarted DHCP --> eth0 connected.

I created a savefolder - connection is not saved.

▶—— NETWORK ——◀

Ethernet controller [0200]: Qualcomm Atheros AR8151 v1.0 Gigabit Ethernet [1969:1073] (rev c0)
• Kernel Driver: atl1c
• Memory Used: 28.00 KB
• Path: /lib/modules/5.7.18-rzm32/kernel/drivers/net/ethernet/atheros/atl1c/atl1c.ko
• Description: Qualcomm Atheros 100/1000M Ethernet Network Driver

Network controller [0280]: Qualcomm Atheros AR928X Wireless Network Adapter (PCI-Express) [168c:002a] (rev 01)
• Kernel Driver: ath9k
• Memory Used: 60.00 KB
• Path: /lib/modules/5.7.18-rzm32/kernel/drivers/net/wireless/ath/ath9k/ath9k.ko
• Description: Support for Atheros 802.11n wireless LAN cards.

peace

mistfire
Posts: 639
Joined: Thu Jul 16, 2020 2:16 am
Location: CALABARZON, PH
Has thanked: 3 times
Been thanked: 139 times

Re: QuickPup 20.06.11

Post by mistfire »

@one
Hello

Could you please run again QuickPup without save file loaded on your computer?

If nm-applet-tray shows that NetworkManager is not running, then run these command on terminal

Code: Select all

#networkdisconnect
#network_default_connect

Then post the output terminal here on this forum.

one
Posts: 239
Joined: Sun Jul 12, 2020 7:53 am
Has thanked: 16 times
Been thanked: 57 times

Re: QuickPup 20.06.11

Post by one »

Hi Mistfire,

thank you for your reply.

Pristine boot, here's the output from terminal:

Code: Select all

# networkdisconnect
Stopping NetworkManager: stopped
# 
# network_default_connect
route: SIOCADDRT: File exists
Starting NetworkManager daemon:  /usr/sbin/NetworkManager
/usr/sbin/network_default_connect: line 97: 11022 Bus error               XDG_CACHE_HOME=/root/.cache $NM_BIN
# 

peace

mistfire
Posts: 639
Joined: Thu Jul 16, 2020 2:16 am
Location: CALABARZON, PH
Has thanked: 3 times
Been thanked: 139 times

Re: QuickPup 20.06.11

Post by mistfire »

@one

That's weird it threw bus error on your computer. Try to boot QuickPup in pristine boot then do this again on terminal.

Code: Select all

#networkdisconnect
#network_default_connect

Now this time upload the /var/log/messages file here on this thread. And also run this command on terminal

Code: Select all

#dmesg

Then post the output terminal here.

Thanks

one
Posts: 239
Joined: Sun Jul 12, 2020 7:53 am
Has thanked: 16 times
Been thanked: 57 times

Re: QuickPup 20.06.11

Post by one »

Hi mistfire,

attached are the /var/log/messages file and the output from #dmesg in terminal.

peace

Attachments
dmesg.txt
(75.08 KiB) Downloaded 39 times
messages.txt
(115.97 KiB) Downloaded 40 times
mistfire
Posts: 639
Joined: Thu Jul 16, 2020 2:16 am
Location: CALABARZON, PH
Has thanked: 3 times
Been thanked: 139 times

Re: QuickPup 20.06.11

Post by mistfire »

@one

According to the logs you sent to me. The SFS modules of QuickPup was corrupted. Did you check if the checksum of the QuickPup that you downloaded was matched with the given checksum?

one
Posts: 239
Joined: Sun Jul 12, 2020 7:53 am
Has thanked: 16 times
Been thanked: 57 times

Re: QuickPup 20.06.11

Post by one »

Hi mistfire,

you're right!

Holy moly, I would have sworn that I "always" check my downloads - but obviously not in this case (I kept my install_iso and could check it). So I downloaded 20.06.11 again, did a new frugal install and problem solved - eth0 connected automatic.

I saw the SQUASHFS errors but sheepish assumed the fault on your side. :oops:
Thank you and sorry for stealing your time!

peace

PiZZa3
Posts: 48
Joined: Tue Jan 26, 2021 1:10 am
Has thanked: 33 times

Re: QuickPup 20.06.8

Post by PiZZa3 »

Actually the minimum ram required for QuickPup was 1Gb. However, I made some revisions on initrd in order to work at low ram for at least 512Mb. You can try the latest QuickPup on Kohjinsha UMPC. In case of hang, just swap the kernel and zdrv file to older one (don't forget to rename the zdrv file to zdrv_quickpup_20.06.sfs)

Hi,

I have not tried QuickPup again yet, but before I do, are there touchscreen drivers?

Thanks

TerryH
Posts: 549
Joined: Mon Jun 15, 2020 2:08 am
Has thanked: 75 times
Been thanked: 118 times

Re: QuickPup 20.06.8

Post by TerryH »

PiZZa3 wrote: Wed Mar 31, 2021 11:43 pm

Actually the minimum ram required for QuickPup was 1Gb. However, I made some revisions on initrd in order to work at low ram for at least 512Mb. You can try the latest QuickPup on Kohjinsha UMPC. In case of hang, just swap the kernel and zdrv file to older one (don't forget to rename the zdrv file to zdrv_quickpup_20.06.sfs)

Hi,

I have not tried QuickPup again yet, but before I do, are there touchscreen drivers?

Thanks

Touchscreen on my Dell laptop is functioning correctly when using quickpup. Currently using latest v11.

New Laptop - ASUS ZenBook Ryzen 7 5800H Vega 7 iGPU / 16 GB RAM

PiZZa3
Posts: 48
Joined: Tue Jan 26, 2021 1:10 am
Has thanked: 33 times

Re: QuickPup 20.06.11

Post by PiZZa3 »

Tested latest 20.06.11, same as last test of QuickPup in this thread viewtopic.php?f=2&t=2082 - it gets to "Setting up services (network" then nothing happens.

mistfire
Posts: 639
Joined: Thu Jul 16, 2020 2:16 am
Location: CALABARZON, PH
Has thanked: 3 times
Been thanked: 139 times

Re: QuickPup 20.06.11

Post by mistfire »

PiZZa3 wrote: Sat Apr 03, 2021 2:52 am

Tested latest 20.06.11, same as last test of QuickPup in this thread viewtopic.php?f=2&t=2082 - it gets to "Setting up services (network" then nothing happens.

Try to swap kernel and zdrv file using older kernel files from other puppies. Don't forget to rename the donor zdrv as zdrv_quickpup_20.06.sfs

mistfire
Posts: 639
Joined: Thu Jul 16, 2020 2:16 am
Location: CALABARZON, PH
Has thanked: 3 times
Been thanked: 139 times

QuickPup 21.00

Post by mistfire »

QuickPup 21.00 released

Changes:
* Glibc 2.33
* icu4c 68.2
* Gvfs 1.40
* Newer widget and network components.
* Improved package management.
* Improved Redmond-Delta theme.
* Improved Package updater (experimental).
-Now works on slackware-current build puppy. Since QuickPup is made from LxPupSc which was created from Slackware Current packages
-Multiple package support for slackware-current build puppy.
-More configurable and added package blacklisting support.

* Improved cron
* Added blacklisting support for remove_builtin
* More bugfixes

NOTE: Starting QuickPup 21.00. A new version scheme is implemented.

Code: Select all

XX.YY
Where XX is the year and YY is the revision number

Download (32-bit only): https://drive.google.com/file/d/1YTGwNX ... sp=sharing
MD5 Checksum: 4d24385e7a290dbae3c4c327746ed850

keniv
Posts: 621
Joined: Mon Jul 13, 2020 2:18 pm
Location: Scotland
Has thanked: 91 times
Been thanked: 63 times

Re: QuickPup 21.00

Post by keniv »

Have tried downloading this twice. Have found it to be extremely slow and gave up both times. This could be at my end but I don't think so. Will try again later.

Regards,

Ken.

mistfire
Posts: 639
Joined: Thu Jul 16, 2020 2:16 am
Location: CALABARZON, PH
Has thanked: 3 times
Been thanked: 139 times

QuickPup 21.01

Post by mistfire »

QuickPup 21.01 released

Changes:
* Updated core packages
* Bugfix for package management
* Improved package updater
* Fixed L2TP VPN pre-shared key bug
* Fixed pBluetooth pairing bug
* Fixed pkg default settings
* Fixed Redmond-Delta theme for GTK+3
* More bugfixes

Download (32-bit only): https://drive.google.com/file/d/1RvjR3O ... sp=sharing
MD5 Checksum: e224d3c83dfca4f7255d2a0552917664

mistfire
Posts: 639
Joined: Thu Jul 16, 2020 2:16 am
Location: CALABARZON, PH
Has thanked: 3 times
Been thanked: 139 times

Re: QuickPup 21.01

Post by mistfire »

keniv wrote: Thu Apr 08, 2021 1:19 pm

Have tried downloading this twice. Have found it to be extremely slow and gave up both times. This could be at my end but I don't think so. Will try again later.

Regards,

Ken.

What's the specs of your computer did QuickPup booted from?

keniv
Posts: 621
Joined: Mon Jul 13, 2020 2:18 pm
Location: Scotland
Has thanked: 91 times
Been thanked: 63 times

Re: QuickPup 21.01

Post by keniv »

mistfire wrote: Thu Apr 08, 2021 2:07 pm

What's the specs of your computer did QuickPup booted from?

I don't think it was an issue with specs but more an issue with download speed from google drive. I did try again and this time download speed was a bit faster so I went and had a coffee and came back to see the last of it download. I have QuickPup 20.6 installed but had not updated for a while. Anyway 21.00 now installed and I'm posting from it now. Have not done much but have noticed that wifi does not auto-connect on reboot. I had the feeling that this had been made the default from one of the updates to v20.6. I think I have a post on this previously in the thread. I'll have a look for it.

Regards,

Ken.

keniv
Posts: 621
Joined: Mon Jul 13, 2020 2:18 pm
Location: Scotland
Has thanked: 91 times
Been thanked: 63 times

Re: QuickPup 21.01

Post by keniv »

keniv wrote: Thu Apr 08, 2021 2:33 pm
mistfire wrote: Thu Apr 08, 2021 2:07 pm

What's the specs of your computer did QuickPup booted from?

I don't think it was an issue with specs but more an issue with download speed from google drive. I did try again and this time download speed was a bit faster so I went and had a coffee and came back to see the last of it download. I have QuickPup 20.6 installed but had not updated for a while. Anyway 21.00 now installed and I'm posting from it now. Have not done much but have noticed that wifi does not auto-connect on reboot. I had the feeling that this had been made the default from one of the updates to v20.6. I think I have a post on this previously in the thread. I'll have a look for it.

Regards,

Ken.

Edit: Found the link outlining how to get wifi to auto-connect on boot up so that's now working. However. I see that OS is now updated to 21.01. I made a new save folder with v21.00. I take it if I now update to v21.01 I should make another fresh save folder. If this is the case and given the time it has taken to download the 21.00 iso I think I'll leave this for a while before I try to download the most up to date version.

keniv
Posts: 621
Joined: Mon Jul 13, 2020 2:18 pm
Location: Scotland
Has thanked: 91 times
Been thanked: 63 times

Re: QuickPup 21.01

Post by keniv »

Have now downloaded and installed v2101 with new save folder. Set up wifi auto-connect. Using portable palemoon 29 and portable iron as browsers so did not install adrv. Good to be able to do this. Posting from palemoon know. Still don't know what the issue was with downloading yesterday but it went better today. So far all seems fine.

Regards,

Ken.

mistfire
Posts: 639
Joined: Thu Jul 16, 2020 2:16 am
Location: CALABARZON, PH
Has thanked: 3 times
Been thanked: 139 times

Re: QuickPup 21.01

Post by mistfire »

keniv wrote: Fri Apr 09, 2021 2:13 pm

Have now downloaded and installed v2101 with new save folder. Set up wifi auto-connect. Using portable palemoon 29 and portable iron as browsers so did not install adrv. Good to be able to do this. Posting from palemoon know. Still don't know what the issue was with downloading yesterday but it went better today. So far all seems fine.

Regards,

Ken.

Regarding downloads you talked about, it might be your ISP having problems on accessing google servers.

User avatar
PipzDex
Posts: 167
Joined: Sun Jul 12, 2020 11:16 pm
Location: Mexico
Has thanked: 41 times
Been thanked: 60 times

Re: QuickPup 21.01

Post by PipzDex »

Hi @mistfire
Finally...
Fresh new install, running smooth, consistent, eth0 network finally connects automatically

As always, I like to install my own packages for testing, such as pcmanfm 1.3.1, PPM 2.5 fixed, dark themes and testing my new Xrandr's Screen Adjuster 1.6, all of the above work without any problem ...

This version showed me that it can be improved with patience, passion for what you do and the comments that we all make with the intention of improving this system

Congratulations

Screenshot_2021-04-10_03-39-19.jpg
Screenshot_2021-04-10_03-39-19.jpg (131.03 KiB) Viewed 906 times

Pentium (R) 2.20GHz I RAM: 4.0 GB I F96-CE_4 I Kernel 6.6.8-64oz-ao I Glibc: 2.31 I 1600x900 Px

My Puppy Stuff and more

mistfire
Posts: 639
Joined: Thu Jul 16, 2020 2:16 am
Location: CALABARZON, PH
Has thanked: 3 times
Been thanked: 139 times

QuickPup 21.02

Post by mistfire »

QuickPup 21.02 released

Changes:
* Additional xfce4 plugins
* Added NDRV module support
* Updated core packages
* Fixed dconf-editor
* Improved pkg and PPM

Download (32-bit only): https://drive.google.com/file/d/1DZ81zw ... sp=sharing
MD5 Checksum: 3a6bfec13aaf450139602dfa193f12df

Language Pack: https://drive.google.com/file/d/1r6iSeM ... sp=sharing

TerryH
Posts: 549
Joined: Mon Jun 15, 2020 2:08 am
Has thanked: 75 times
Been thanked: 118 times

Re: QuickPup 21.02

Post by TerryH »

Updated manual frugal installation to 21.02. @mistfire It just gets better all the time. Very impressive, I just found by chance while moving my cursor over the battery indicator and was surprised that it now has a brightness control slider, as well as the XFCE Power Management.

The only issue, which is not specific to Quickpup, is that the XFCE Weather plugin at present isn't working. This seems to be an ongoing occurrence with many XFCE installations. The location is currently being found and set correctly, but displays 'No Data'.

Edit: Trying to install later version using PPM which shows 0.10.2 available but fails to download package, so I tried to compile the latest version 0.11.0. I have the latest devx which I loaded. The compile failed and I don't know how to fix. The last four lines of the configure are:

Code: Select all

checking how to run the C preprocessor... /lib/cpp
configure: error: in `/mnt/sda6/xfce4-weather-plugin-0.11.0':
configure: error: C preprocessor "/lib/cpp" fails sanity check
See `config.log' for more details
config.log.gz
File is fake .gz
(32.95 KiB) Downloaded 33 times

Any assistance greatly appreciated.

New Laptop - ASUS ZenBook Ryzen 7 5800H Vega 7 iGPU / 16 GB RAM

TerryH
Posts: 549
Joined: Mon Jun 15, 2020 2:08 am
Has thanked: 75 times
Been thanked: 118 times

Re: QuickPup 21.02

Post by TerryH »

The reason I attempted the compile as mentioned above is that any downloads attempted using PPM which attempts to download from the slackware-15.0 or slackware-current repositories fails to download. I can download from slackware-14.2 or the slackware-15.0-salix repository successfully. To check I booted with pfix=ram and after update, I updated the PPM database and re-tried several downloads. All downloads which were from the 2 mentioned database failed, while other downloads were successful.

New Laptop - ASUS ZenBook Ryzen 7 5800H Vega 7 iGPU / 16 GB RAM

mistfire
Posts: 639
Joined: Thu Jul 16, 2020 2:16 am
Location: CALABARZON, PH
Has thanked: 3 times
Been thanked: 139 times

Re: QuickPup 21.02

Post by mistfire »

TerryH wrote: Thu Apr 15, 2021 9:38 pm

The reason I attempted the compile as mentioned above is that any downloads attempted using PPM which attempts to download from the slackware-15.0 or slackware-current repositories fails to download. I can download from slackware-14.2 or the slackware-15.0-salix repository successfully. To check I booted with pfix=ram and after update, I updated the PPM database and re-tried several downloads. All downloads which were from the 2 mentioned database failed, while other downloads were successful.

Slackware-15.0 and Slackware-Current repos are dynamic repository because it was rolling release. You need to update it first if you want to download packages on PPM using that repo

TerryH
Posts: 549
Joined: Mon Jun 15, 2020 2:08 am
Has thanked: 75 times
Been thanked: 118 times

Re: QuickPup 21.02

Post by TerryH »

mistfire wrote: Thu Apr 15, 2021 10:20 pm
TerryH wrote: Thu Apr 15, 2021 9:38 pm

The reason I attempted the compile as mentioned above is that any downloads attempted using PPM which attempts to download from the slackware-15.0 or slackware-current repositories fails to download. I can download from slackware-14.2 or the slackware-15.0-salix repository successfully. To check I booted with pfix=ram and after update, I updated the PPM database and re-tried several downloads. All downloads which were from the 2 mentioned database failed, while other downloads were successful.

Slackware-15.0 and Slackware-Current repos are dynamic repository because it was rolling release. You need to update it first if you want to download packages on PPM using that repo

As I mentioned in my post, I did update the repository database. I have updated it several times.

New Laptop - ASUS ZenBook Ryzen 7 5800H Vega 7 iGPU / 16 GB RAM

mistfire
Posts: 639
Joined: Thu Jul 16, 2020 2:16 am
Location: CALABARZON, PH
Has thanked: 3 times
Been thanked: 139 times

Re: QuickPup 21.02

Post by mistfire »

@TerryH

Did you try to install via pkg?
Also regard compiling. I read the config log, did you load the xfce dev files and linux headers?

P.S: Slackware repos sometimes return 404 not found even it exists. The solution was to wait for few minutes then try to download the package

Last edited by mistfire on Thu Apr 15, 2021 11:22 pm, edited 1 time in total.
User avatar
PipzDex
Posts: 167
Joined: Sun Jul 12, 2020 11:16 pm
Location: Mexico
Has thanked: 41 times
Been thanked: 60 times

Re: QuickPup 21.02

Post by PipzDex »

Hi @mistfire

This is something that I had already seen from the beginning but until today I could see it as a mistake ...
It is about the clock, since when starting the setup, we select the city where we are located, but it does not make changes to the clock that is in the lower bar, for this, we have to do it directly on the clock and select from the area where we are, Up to here we would solve the problem of the schedule, but when installing conky and this when representing a clock, it shows a totally different time and date from the one we are supposed to define on both occasions ...
Could it be a bug or is conky just not fit for use with XFCE?

Pentium (R) 2.20GHz I RAM: 4.0 GB I F96-CE_4 I Kernel 6.6.8-64oz-ao I Glibc: 2.31 I 1600x900 Px

My Puppy Stuff and more

mistfire
Posts: 639
Joined: Thu Jul 16, 2020 2:16 am
Location: CALABARZON, PH
Has thanked: 3 times
Been thanked: 139 times

Re: QuickPup 21.02

Post by mistfire »

PipzDex wrote: Thu Apr 15, 2021 11:06 pm

Hi @mistfire

This is something that I had already seen from the beginning but until today I could see it as a mistake ...
It is about the clock, since when starting the setup, we select the city where we are located, but it does not make changes to the clock that is in the lower bar, for this, we have to do it directly on the clock and select from the area where we are, Up to here we would solve the problem of the schedule, but when installing conky and this when representing a clock, it shows a totally different time and date from the one we are supposed to define on both occasions ...
Could it be a bug or is conky just not fit for use with XFCE?

QuckPup uses localtime by default to avoid messing the clock on Windows during dual boot.

TerryH
Posts: 549
Joined: Mon Jun 15, 2020 2:08 am
Has thanked: 75 times
Been thanked: 118 times

Re: QuickPup 21.02

Post by TerryH »

PPM > Help and Menu > Help fail to launch a web browser, also adding the Web Browser as a launcher in a panel fails to execute. The problem is these instances use the command:

Code: Select all

exo-oen --launch WebBrowser %u

The problem is that this command is attempting to execute light browser. You need to update this to use the installed browser in quickpup, seamonkey instead of light.

Edit: I found exo-preferred-applications and changed it to seamonkey. The default should still be changed from light to stop the errors by default.

Last edited by TerryH on Thu Apr 15, 2021 11:42 pm, edited 1 time in total.

New Laptop - ASUS ZenBook Ryzen 7 5800H Vega 7 iGPU / 16 GB RAM

Post Reply

Return to “Puppy Derivatives”