Hi everyone.The first thing is to i will say im sorry for writing and word mistakes.Because im not so good in english.Whatever i have to ask something.İ did install fossapup64 and booted that.İt did fully worked and i did changed some settings and somethings like that and with it created a text for try. İ did setup the puppy to sdd1 and created another part and thats name of the sdd2 to be ext 3 with persistence and mounted how it should be.After that when i was shutting down to pc puppy did ask to me to where to save my settings and all of things like that and i choosed to sdd2 and it saved there without encrypting.And here is my problem i did booted the pc in same type but my settings didnt loaded i can see that save folder and my try text but it didnt loaded.
How to load saved settings in the first bootup?
Moderators: 666philb, Forum moderators
-
HerrBert
- Posts: 375
- Joined: Mon Jul 13, 2020 6:14 pm
- Location: Germany, NRW
- Has thanked: 22 times
- Been thanked: 138 times
Re: How to load saved settings in the first bootup?
Hi and 
I must admit, i have no knowledge about fossapup at all, but booting should be common for all newer puppies.
Also i don't use savefiles/savefolders. But IIRC there is a bootparameter called psave you can use on the kernel command line. The value should be the partition:/path/name_of_save. The colon : is important!
If you boot off sdd1, you can try a file named SAVEMARK in your fossapup installation (sub)directory. It should be a plain text file with only the number of the partition. In your case it would be 2
-
bigpup
- Moderator
- Posts: 7593
- Joined: Tue Jul 14, 2020 11:19 pm
- Location: Earth, South Eastern U.S.
- Has thanked: 1038 times
- Been thanked: 1692 times
Re: How to load saved settings in the first bootup?
Are you using the boot menu entry that is ram only? "fossapup64 9.5 - RAM only"
If yes.
That entry boots and does not use the save.
Should be using the first menu entry that is the normal boot.
The one that is just "Fossapup64 9.5"
The things you do not tell us, are usually the clue to fixing the problem.
When I was a kid, I wanted to be older.
This is not what I expected 
Re: How to load saved settings in the first bootup?
İ always booted pc with the choosed one but cant load the saved settings and files
- Attachments
-
- IMG_20210522_191548.jpg (132.1 KiB) Viewed 1088 times
Re: How to load saved settings in the first bootup?
@HerrBert im sorry for that but can u explain that step by step if its not problem for you how is it work and how i should do because im using translate for somethings and i cant understand somethings.
And thanks for welcome.
-
HerrBert
- Posts: 375
- Joined: Mon Jul 13, 2020 6:14 pm
- Location: Germany, NRW
- Has thanked: 22 times
- Been thanked: 138 times
Re: How to load saved settings in the first bootup?
You did not tell how you installed fossapup64, but the image you posted shows grub2 with the configuration found in the .iso file.
If you did a cd installation to your sdd drive, it would be readonly (ISO9660). So there is no way to edit the boot config files.
One suggestion would be to boot in RAM (copy files to RAM) and reinstall puppy using one of its installers.
FrugalPup installer for example can take care of savefile/folder on other partitions.
Re: How to load saved settings in the first bootup?
Thanks for everyone but my problem was solved and I didn't do anything. When I turned the puppy back on, I saw the first registrations coming back but I don't know how 
İts ok for me.